Дисертації з теми "Automation and technology in building and construction"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Automation and technology in building and construction".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Folkesson, Patrik, and Robert Lönnroos. "Construction Automation : Assessment of State of the Art and Future Possibilities." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-39553.
Повний текст джерелаSedehi, Arya John. "Leveraging radio frequency technology identification for productivity analysis in high-rise construction." Thesis, Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/39625.
Повний текст джерелаLindberg, Joakim, and Adam Viebke. "Systemsvagheter och systemstyrkor för användandet och utvecklandet av fastighetsautomation : En explorativ intervjustudie av teknologiska innovationssystem inom byggindustrin." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-64301.
Повний текст джерелаByggnader representerar idag en stor del av den totala energiförbrukningen i samhället. I takt med en ökad miljömedvetenhet har intresset för att sänka byggnaders energiförbrukning blivit en allt viktigare fråga och fastighetsautomation har uppmärksammats som ett effektivt sätt för att bidra till ett mer hållbart samhälle. Syfte med denna rapport är att identifiera de systemsvagheter och systemstyrkor som finns mellan aktörerna i byggindustrin vid implementering och utveckling av fastighetsautomation. Genom att förstå systemsvagheterna och systemstyrkorna för en teknologi i ett system kan förståelse skapas för hur en industri skall agera för att kunna öka användandet och utvecklingen av en viss teknik. Fastighetsautomation kan sägas vara en systemisk innovation, det vill säga en innovation som påverkar fler än en part. I och med att flera aktörer påverkas av innovationen kännetecknas systemiska innovationer av dess komplexitet att genomföra. Ett verktyg för att förstå de bakomliggande utmaningarna för ett system är det teknologiska innovationsramverket. Ramverket har legat till grund för analysen kring systemstyrkor och systemsvagheter inom området för fastighetsautomation. Till detta har även en litteraturstudie genomförts kring teknologiska innovationssystem samt systemisk innovation. Genom att ha undersökt insamlade data från 19 expertintervjuer baserade på de sju funktionerna som presenterats i det teknologiska innovationsramverket, har fem systemsvagheter och fyra systemstyrkor kunnat identifieras. De fem systemsvagheterna är (B1). Byggindustrins uppbyggnad och arbetssätt, (B2). Bristande industriell samverkan, (B3). Byggindustrins konservativa attityd, (B4). Begränsad tillgång och utveckling av humankapital, och (B5) Svaga marknadsincitament. Baserat på systemsvagheterna förs en diskussion kring vikten av samordning mellan byggindustrins aktörer och discipliner. Med förståelsen för de fyra systemstyrkorna, (D1). Etablerad marknad och beprövad teknik, (D2). Stark digitaliseringstrend och positiv kunskaps tillförsel, (D3). Ökad miljömedvetenhet och (D4). Stark urbaniseringstrend, skapas en förståelse för faktorer som gynnar byggindustrins arbete med fastighetsautomation.
Taylor, Mark D. "Economic appraisal and risk analysis of construction automation." Thesis, Edinburgh Napier University, 2003. http://researchrepository.napier.ac.uk/Output/4278.
Повний текст джерелаIbanez-Guzman, Javier. "Robotic tools and automation aids for modular construction of building." Thesis, University of Reading, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358027.
Повний текст джерелаHowe, A. Scott. "Modular robots for self-constructing building systems." Thesis, Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/hkuto/record/B39005185.
Повний текст джерелаWinroth, Robin. "Evaluating the Next Generation of Building Automation – IoT SmartBuildings." Thesis, KTH, Skolan för kemi, bioteknologi och hälsa (CBH), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-278048.
Повний текст джерелаNassar, Khaled. "A Framework for Building Assembly Selection and Generation." Diss., Virginia Tech, 1999. http://hdl.handle.net/10919/29138.
Повний текст джерелаPh. D.
Bellman, Markus, and Gustav Göransson. "Intelligent Process Automation : Building the bridge between Robotic Process Automation and Artificial Intelligence." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-263090.
Повний текст джерелаProcessautomation har potentialen att ge stora fördelar för företag och organisationer, speciellt i finansbranschen där företag är informationsintensiva och har stora dataflöden. Detta har huvudsakligen gjorts med Robotic Process Automation (RPA) men den ökade mognadsgraden av maskininlärning har snabbt förbättrat möjligheten att kombinera RPA med Artificiell Intelligens (AI) för att därmed möjliggöra Intelligent Process Automation (IPA). I övergången från RPA till IPA uppkommer däremot en del utmaningar och problem som företag måste hanteras innan potentialen med dessa nya tekniker kan förverkligas. Den här forskningen ämnar att identifiera de utmaningar som företagen kommer ställas inför samt ge vägledning för vilka förberedelser som företagen måste genomföra innan IPA kan implementeras fullskaligt i organisationen. Forskningen genomfördes som en teoribyggande fallstudie på en stor svensk bank. Den teoretiska grunden samlades in genom en omfattande litteraturstudie och en empirisk studie bestående av intervjuer med forskare samt automationsutvecklare och FoU på banken. Resultaten från litteraturstudien och empirin kombinerades och kondenserades till ett vägvisande ramverk för organisationer som vill implementera IPA.
Fu, Chenglong. "Automation of Building Energy Performance Simulation with IDA ICE." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-284528.
Повний текст джерелаByggnader spelar en central roll för urbana områdens levbarhet och koldioxidavtryck. Ambitiösa mål för energibesparing och utsläppsminskning har skapat ett behov av en ny generation beslutsstödmetoder och verktyg som möjliggör detaljerad analys av städers energianvändning i stor skala. Urban byggnadsenergimodellering (UBEM) har nyligen utvecklats och är ett effektivt tillvägagångssätt för att bedöma energiprestanda för flera byggnader och systemeffekter för olika energiåtgärder inom den urban miljön. Den ytterligare uppskalningen av UBEM är dock begränsad på grund av bristen på automation av simulering som är inriktade på byggnadsenergiprestanda (BEP), vilket krävs för att hantera stora byggnadsbestånd. Det här examensarbetet syftar till att utforska utmaningar med automatisering av BEP-simuleringar och att utveckla en prototyp som ska fungera som en mellanprogramvara mellan UBEM och BEP-simuleringsmotorer, med fokus på IDA ICE(som är en simuleringsprogramvara). Resultatet av examensarbetet är icepy, som är ett verktyg för att automatisera BEP-simuleringar i IDA-ICE. Icepy använder IDA ICE API och Lispskript för att tillhandahålla interaktion mellan UBEM-processen och IDA ICE för att generera en initial simuleringsmodell (IDM), utför själva simuleringen och slutligen hanterar resultatet på ett automatiserat sätt. Genom att icepy implementeras som ett Pythonpaket kan den modifiera flera IDM:er och även exportera simuleringsresultat med några få kodrader. Området Minneberg i Stockholm har använts i en fallstudie för att validera och testa verktyget. Automatiseringsfunktionerna i icepy har möjliggjort känslighetsanalyser för olika byggnadsdesignparametrar, exempelvis studerades påverkan av olika värden på förhållandet mellan fönster och väggar genom användning av tre olika algoritmer för fönsterdistributioner. Det utvecklade verktyget har begränsningar i funktionalitet framförallt på grund av att enbart byggnadens ytterskal studerades i byggnadsenergisimuleringarna. Verktyget har dock visat sig vara ett effektivt tillvägagångssätt för att automatisera simuleringsprocesser, vilket visar på en god potential att också vidareutveckla dessa verktyg.
Hardcastle, Clifford. "An information model of the construction cost estimating process." Thesis, Heriot-Watt University, 1992. http://hdl.handle.net/10399/1386.
Повний текст джерелаSimmonds, Daphne Marie. "Information Technology and Sustainability| An Empirical Study of the Value of the Building Automation System." Thesis, University of South Florida, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=3722168.
Повний текст джерелаThis study examines the environmental and economic effects of green information technology (IT). Green IT describes two sets of IT innovations: one set includes innovations that are implemented to reduce the environmental impact of IT services in organizations; and the other IT to reduce the environmental impact of other organizational processes. The two sets respond to the call for more environmentally friendly or “greener” organizational processes.
I developed and tested a preliminary model. The model applied the resource based view (RBV) of the firm (Wernerfelt 1984) the stakeholder theory (Freeman 1984) and included four constructs: (1) BAS implementation; environmental value conceived in a novel way as the conservation of electric energy in buildings; economic value -- from energy cost savings; and BAS complements. These four constructs formed three propositions: (1) BAS implementation is positively associated with environmental value; (2) environmental value is positively associated with economic value; and BAS complements moderate the relationship BAS implementation and environmental value.
The model was used to guide the investigation of three research questions: 1. What are the environmental and economic values of green IT? 2. How do green IT create the above values? 3. Are other dimensions of value created? If so, what are they?
The focal IT investigated was the building automation system – a system designed to conserve electric energy and decrease operational costs. The unit of analysis of the study was the facilities management team – the implementers of the system.
I collected data on a sample of six diverse cases of BAS implementations. The cases were diverse in terms of the BAS types, the building purposes, the building locations and the building occupancy and management. Two types of BAS were involved in the study, each with a different level of artificial intelligence: the more intelligent BAS self-reconfigured when changes in setpoints, for example, were necessary; the less intelligent BAS must be reconfigured by an engineer in similar circumstances.
There was also diversity in terms of the buildings in which the systems were implemented and the occupancy and management of the buildings. The buildings include: the corporate headquarters of a global telecommunications firm; university classrooms; a residence hall in a university; and three multi-tenanted office complexes. The building occupancy and management differ in that some buildings are owner-occupied and are managed in-house, while the others are leased and their management outsourced.
Data collection involved recorded semi-structured interviews of three sets of users in the organizations: building engineers; chief engineers; and property/facilities managers. The interviews were prearranged and were conducted onsite using an interview protocol. Each interview lasted approximately one hour and was conducted in one session. The data were transcribed and analyzed in Nvivo 10.
The findings showed support for the presence of the four constructs within the preliminary model as well as for the three propositions in the preliminary model. The data also revealed contextual details of the BAS implementation and BAS complements constructs. There were also new dimensions value including: unanticipated types of economic value (including savings from reduced labor demand; social value (comfort and safety for building occupants); and strategic value (knowledge used to position the organizations for greater efficiency and effectiveness). Overall, the value outcomes of the implementations can be summarized as short term social, environmental and economic value as well as strategic value – consistent with the concept of sustainable value defined by Hart et al. (1995).
Also, consistent with Zuboff’s (1985) description of the duality of intelligent IT systems -- the ability to informate and automate, the BAS implementation construct was found to include two distinct sources of value: equipment automation; and equipment information. The unanticipated value dimensions and types, as well as the sources of value were used to refine the research model.
The study therefore a preliminary theoretical model – the resource based view of the sustainable organization (RBV-SO) -- as well as contextual implementation details that can be used to guide future investigations of the value created by intelligent green IT systems such as the BAS, as well as measurement items that can be used to inform quantitative studies of these systems. The study also adds to the practical body of knowledge concerning green IT implementations in general and implementations of the BAS in particular, concerning: details of the information value – for example, for measuring the environmental impact of the system and for substantiating claims in the application for green funds available to organizations; and details of some key complementary resources that enhance value creation within the context.
Two major limitations of this study are: (1) a single coder was used in the analysis process and therefore no inter-coder reliability was established for the results; and (2) user perceptions rather than actual quantities were used to validate the findings.
Some future research prospects include: use of these findings to conduct a quantitative study of an intelligent system extended with, for example, investigation of the impact of external forces such as government regulations, environmental issue salience, and market forces on the value created by green IT (such as the BAS); and investigation of the impact over time of the development of the strategic capabilities enabled by the BAS on creation of value.
Zhai, Dong. "THE RELATIONSHIP BETWEEN INFORMATION TECHNOLOGY AND CONSTRUCTION PRODUCTIVITY." UKnowledge, 2010. http://uknowledge.uky.edu/gradschool_diss/44.
Повний текст джерелаDuerr, Douglas K., and Douglas K. Duerr. "A computer tutorial as a pedagogical tool for building construction technology." Thesis, The University of Arizona, 1991. http://hdl.handle.net/10150/626032.
Повний текст джерелаFox, Stephen John. "Application of design for manufacture principles to building design and construction." Thesis, Sheffield Hallam University, 2001. http://shura.shu.ac.uk/19207/.
Повний текст джерелаMayon, Isaac Dompo. "Exploring Earth-Building Technology for Liberia." Digital Commons @ East Tennessee State University, 2009. https://dc.etsu.edu/etd/1896.
Повний текст джерелаSimmonds, Daphne Marie. "Information Technology & Sustainability: An Empirical Study of the Value of the Building Automation System." Scholar Commons, 2015. http://scholarcommons.usf.edu/etd/5774.
Повний текст джерелаMa, Chao-Peng. "IT performance and organisational characteristics in construction firms : the case of Taiwanese contractors." Thesis, University College London (University of London), 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251670.
Повний текст джерелаOdeyinka, Henry Agboola. "The development and validation of models for assessing risk impacts on construction cash flow forecast." Thesis, Glasgow Caledonian University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.289428.
Повний текст джерелаWolff, Sebastien Jean. "Statically Stable Assembly Sequence Generation And Structure Optimization For A Large Number Of Identical Building Blocks." Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/14045.
Повний текст джерелаSulaiman, Noor Fauziah. "The development of a dual phase approach to embracing a total quality culture in the Malaysian construction industry." Thesis, Glasgow Caledonian University, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251242.
Повний текст джерелаRoss, Sheila. "Bamboo construction as a sustainable building technology from a structural and materials engineering perspective." Master's thesis, Faculty of Engineering and the Built Environment, 2021. http://hdl.handle.net/11427/33901.
Повний текст джерелаAlekhtyar, Mumena. "Building Information Modelling and Virtual Design and Construction : Differentiations and interaction." Thesis, KTH, Fastigheter och byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231602.
Повний текст джерелаCarlsén, Adam, and Oscar Elfstrand. "Augmented Construction : Developing a framework for implementing Building Information Modeling through Augmented Reality at construction sites." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69254.
Повний текст джерелаDabhi, Meet, and Karthik Ramanan Vaidyanathan. "Automation and synchronizationof traction assistance devices toimprove traction and steerability ofa construction truck." Thesis, KTH, Fordonsdynamik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-209198.
Повний текст джерелаLin, Frank Ching-Shou. "The integration between design and maintenance of office building automation : a decision support approach." Thesis, Queensland University of Technology, 2005. https://eprints.qut.edu.au/16058/1/Frank_Lin_Thesis.pdf.
Повний текст джерелаLin, Frank Ching-Shou. "The integration between design and maintenance of office building automation : a decision support approach." Queensland University of Technology, 2005. http://eprints.qut.edu.au/16058/.
Повний текст джерелаWang, Qingguo. "Measurement and modelling of moisture transport processes within porous construction materials." Thesis, University of Bedfordshire, 2005. http://hdl.handle.net/10547/622114.
Повний текст джерелаRegona, Massimo. "Opportunities and adoption constraints of artificial intelligence in the construction industry: A scoping study." Thesis, Queensland University of Technology, 2022. https://eprints.qut.edu.au/232514/1/Massimo_Regona_Thesis.pdf.
Повний текст джерелаKloukinas, Dimitrios. "Neolithic building technology and the social context of construction practices : the case of northern Greece." Thesis, Cardiff University, 2015. http://orca.cf.ac.uk/69069/.
Повний текст джерелаBowden, Sarah L. "Application of mobile IT in construction." Thesis, Loughborough University, 2005. https://dspace.lboro.ac.uk/2134/794.
Повний текст джерелаAI, Hussein Zaid K. "Using Building Information Modeling (BIM) and the Last Planner System (LPS) to Reduce Construction Process Delay." TopSCHOLAR®, 2016. http://digitalcommons.wku.edu/theses/1746.
Повний текст джерелаXu, Weili. "An Energy and Cost Performance Optimization Platform for Commercial Building System Design." Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/956.
Повний текст джерелаGoodwin, Peter. "The influence of industrial technology and material procurement on the design, construction and development of H.M.S. Victory." Thesis, University of St Andrews, 1998. http://hdl.handle.net/10023/15112.
Повний текст джерелаHuang, Zhaohui. "The analysis of thermal and fire performance of cementitious building components." Thesis, University of Central Lancashire, 1995. http://clok.uclan.ac.uk/1765/.
Повний текст джерелаLabib, Wafa Abdelmajeed. "An experimental study and finite analysis of punching shear failure in steel fibre-reinforced concrete ground-suspended floor slabs." Thesis, Liverpool John Moores University, 2008. http://researchonline.ljmu.ac.uk/5893/.
Повний текст джерелаXiong, Liang. "Impact of Green Design and Technology on Building Environment." Thesis, University of North Texas, 2015. https://digital.library.unt.edu/ark:/67531/metadc822831/.
Повний текст джерелаShrestha, Chandra R. "Advanced technology in a low technology setting : the application of building information modeling in the rural settings of Nepal." Virtual Press, 2007. http://liblink.bsu.edu/uhtbin/catkey/1379441.
Повний текст джерелаDepartment of Architecture
Vuppuluri, Prem Kiran. "Impact of Sustainable Cool Roof Technology on Building Energy Consumption." PDXScholar, 2014. http://pdxscholar.library.pdx.edu/open_access_etds/1530.
Повний текст джерелаUgursal, Ahmet. "The effects of human behavior and information-transmitting medium on the library building typology." Virtual Press, 2005. http://liblink.bsu.edu/uhtbin/catkey/1318943.
Повний текст джерелаDepartment of Architecture
Brigham, Martin Patrick. "The organisation of technology and the technology of organisation : the Vehicle Mounted Data System and the provision of UK fire services." Thesis, University of Warwick, 2005. http://wrap.warwick.ac.uk/1184/.
Повний текст джерелаMtya, Amanda. "Evaluation of building information modelling (BIM) adoption, capability and maturity within South African consulting and construction firms." Master's thesis, Faculty of Engineering and the Built Environment, 2019. http://hdl.handle.net/11427/30916.
Повний текст джерелаWorden, Kathleen. "BIM and Communication: Implementation of Building Information Modeling into an Integrated Project Delivery contract to encourage project teams to communicate." DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1619.
Повний текст джерелаRees, Marc. "The integrated design of new build multi vector energy supply schemes." Thesis, Cardiff University, 2012. http://orca.cf.ac.uk/40011/.
Повний текст джерелаJerome, Adeline. "Integration of LCA into the building design process." Thesis, KTH, Hållbara byggnader, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-251814.
Повний текст джерелаWingårdh, Ludvig. "Construction of prefabricated concrete buildings : A comparative attributional LCA." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299525.
Повний текст джерелаDenna masteruppsats undersöker betydelsen av andelen prefabricerad betong i byggnader och dess påverkan på den inbyggda miljöpåverkan. En jämförande bokförings-LCA gjordes av fyra svenska referensbyggnader för att undersöka prefabrikationsgradens inverkan i fem kategorier av miljöpåverkan: kumulativ energiförbrukning, global uppvärmning, vattenförbrukning, och förbrukning av minerala och fossila naturresurser. Referensbyggnaderna hade prefabricerade andelar av 14, 26, 38 och 91%. Resultaten indikerar att en högre grad av prefabricering kan leda till en lägre påverkan i de undersökta kategorierna i viss mån, inte minst på grund av en lägre total förbrukning av betong per kvadratmeter BTA, beroende på vilken konstruktionsmetod som används. De mest betydelsefulla råmaterialen fanns vara cement och stål. En initial förbättring i flertalet kategorier syntes när prefabrikationsgraden ökade från 14 till 38%, mycket tack vare den lägre betongförbrukningen. När prefabrikationsgraden steg ytterligare till 91% syntes ingen tydlig förbättring, och det kan inte anses klarlagt att en högre prefabrikationsgrad nödvändigtvis har lägre miljöpåverkan. Detta indikerar att den mest fördelaktiga lösningen ofta kan vara en semi-prefabricerad lösning, vilket överensstämmer med resultaten i tidigare studier på området. För ytterligare reducering av miljöpåverkan efter en viss grad av prefabricering framstår andra faktorer såsom materialval som allt viktigare.
Miller, Wendy. "Design, Construction and Performance of Australian Sustainable Homes: Subtropical Case Studies." Thesis, Queensland University of Technology, 2012. https://eprints.qut.edu.au/107519/1/__qut.edu.au_Documents_StaffHome_StaffGroupR%24_rogersjm_Desktop_Wendy%20Miller%20Thesis.pdf.
Повний текст джерелаMcLeod, Robert S. "An investigation into the performance of low energy and zero carbon buildings in a changing climate : applying the Passivhaus house standard to the UK context." Thesis, Cardiff University, 2013. http://orca.cf.ac.uk/56966/.
Повний текст джерелаBarrett, John Richard. "Sustainability and the ecological footprint : comparing human demand with nature's supply." Thesis, Liverpool John Moores University, 2000. http://researchonline.ljmu.ac.uk/5529/.
Повний текст джерелаHou, Shangjie. "An ontology-based holistic approach for multi-objective sustainable structural design." Thesis, Cardiff University, 2015. http://orca.cf.ac.uk/91138/.
Повний текст джерела