Добірка наукової літератури з теми "Arme numérique"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Arme numérique".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Arme numérique":
Le Lay, Guillaume. "Les libertés numériques, une défense par le droit héritière du Gisti ?" Plein droit 140, no. 1 (May 28, 2024): 51–54. http://dx.doi.org/10.3917/pld.140.0053.
Hémar-Nicolas, Valérie, Pascale Ezan, and François H. Courvoisier. "Les enjeux stratégiques des sites internet pour les jeunes enfants." Décisions Marketing N° 67, no. 3 (August 1, 2012): 75–80. http://dx.doi.org/10.3917/dm.067.0075.
Remize, Michel. "Archiviste numérique." Archimag N°316, no. 6 (July 1, 2018): 1. http://dx.doi.org/10.3917/arma.316.0001.
Halsenbach, Axel. "Les écolabels du numérique." Archimag N°357, no. 7 (September 1, 2022): 39. http://dx.doi.org/10.3917/arma.357.0039.
Remize, Michel. "Alerte au vrac numérique !" Archimag N°342, no. 2 (March 1, 2021): 1. http://dx.doi.org/10.3917/arma.342.0001.
Remize, Michel. "Pour un numérique responsable." Archimag N°329, no. 9 (November 1, 2019): 1. http://dx.doi.org/10.3917/arma.329.0001.
Remize, Michel. "Outils : cerner le vrac numérique." Archimag N°342, no. 2 (March 1, 2021): 20–21. http://dx.doi.org/10.3917/arma.342.0020.
Fischer, Severin. "Les réglementations du numérique responsable." Archimag N° 375, no. 5 (June 10, 2024): 28–29. http://dx.doi.org/10.3917/arma.375.0028.
Texier, Bruno. "Vers un portefeuille numérique européen." Archimag N°370, no. 10 (December 1, 2023): 4. http://dx.doi.org/10.3917/arma.370.0004.
Texier, Bruno. "Nettoyage numérique, une opération indispensable." Archimag N°332, no. 2 (March 1, 2020): 52–53. http://dx.doi.org/10.3917/arma.332.0052.
Дисертації з теми "Arme numérique":
Merabet, Omar. "Modélisation des structures planes en béton arme sous chargements monotone et cyclique : construction et validation d'un modèle numérique." Lyon, INSA, 1990. http://www.theses.fr/1990ISAL0005.
Papy, Alexandre. "Etude numérique de la balistique intérieure des armes de petit calibre." Doctoral thesis, Universite Libre de Bruxelles, 2005. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/211017.
Ce document synthétise un travail de quatre années relatif à l'étude des phénomènes dynamiques rencontrés dans une arme de petit calibre. Jusqu'à présent, des efforts ont été réalisés pour simuler des armes de gros calibre, avec plus ou moins de succès. L'adaptation directe de ces méthodes au petit calibre est, la plupart du temps, décevante car peu précise. De plus, le coût des essais en arme de petit calibre, relativement faible par rapport à des essais en armes de calibre plus important, a contribué au désintérêt des études dans ce domaine. Encore aujourd'hui, des fabriquants d'armes de renommée internationale ne disposent pas de modèles pour le petit calibre. Celui-ci a été, et reste encore aujourd'hui, le parent pauvre des simulations numériques en balistique intérieure.
A l'heure actuelle, de nombreuses recherches sont entreprises dans le cadre des canons électriques ou électromagnétiques. Ces armes, qui représentent peut-être le futur de la balistique, ne sont encore qu'à un stade fort éloigné d'une utilisation effective et opérationnelle. La situation est donc assez paradoxale :les armes de petit calibre sont les plus utilisées (dans le cadre d'une utilisation militaire, sportive ou à des fins de tests) mais il n'existe, à proprement parler, que peu de modèles mathématiques permettant une simulation précise et rigoureuse. Dans ce contexte, ce travail va démontrer que des modèles de balistique intérieure peuvent être utilisés avec succès pour la simulation de tirs en armes de petit calibre.
Une des originalités de ce travail consiste en l'utilisation d'un logiciel de CFD (Computational Fluid Dynamics} comme squelette d'un simulateur de la balistique intérieure, et à son application sur des armes de petit calibre. L'approche employée permet de dissocier les aspects "mécanique des fluides" et traitement de l'écoulement, des aspects purement balistiques. Nous nous attacherons donc à évaluer la capacité d'un code CFD à fonctionner dans l'environnement particulier de la simulation du "coup de canon".
Plan du travail
Cette thèse peut être subdivisée en quatre différentes parties. La première partie, plutôt générale, vise à situer le problème dans son contexte. Elle débute par une introduction rapide à la balistique, et s'attarde sur les buts de la balistique intérieure en mettant l'accent sur les particularités des armes de petit calibre, le cas échéant.
La simulation sur ordinateur est un aspect important du problème qui doit nécessairement être mis en rapport avec des résultats réels. C'est pourquoi la chaîne de mesure utilisée classiquement en balistique, ainsi que les dispositifs expérimentaux employés pour obtenir des résultats de validation, sont brièvement présentés dans la deuxième partie.
La troisième partie est axée sur les modèles. Nous présentons les principaux types de modèles que l'on peut retrouver en balistique intérieure. Les modèles à paramètres globaux et à paramètres locaux sont développés et nous formulons quelques remarques générales au sujet de l'état de l'art dans ce domaine, avant de nous interroger sur la problématique du choix d'un logiciel CFD adapté à l'utilisation visée.
Nous présentons alors le logiciel choisi, et détaillons les modèles qu'il utilise pour tenir compte des particularités de la balistique intérieure. Le mouvement du projectile dans l'arme, la combustion et le traitement du problème diphasique sont notamment passés en revue et développés.
Mobidic (Mobidic est l'acronyme de :MOdélisation Balistique Intérieure DIphasique Canon) est un logiciel français que nous avons obtenu vers la fin de cette étude. Ce logiciel est reconnu pour sa capacité à modéliser précisément les tirs en arme de moyen et gros calibre. Son fonctionnement et les modèles qu'il utilise sont exposés et comparés à notre implémentation.
La quatrième et dernière partie n'est certainement pas la moins importante. Elle présente les résultats issus des tirs que nous avons réalisés et les différentes étapes de validation qui ont été menées à bien, depuis les tests de base jusqu'à la validation totale dans deux armes de petit calibre.
Enfin, les conclusions, remarques et directions futures clôturent ce travail.
Doctorat en sciences appliquées
info:eu-repo/semantics/nonPublished
Rousseau, Jessica. "Modélisation numérique du comportement dynamique de structures sous impact sévère avec un couplage éléments discrets / éléments finis." Phd thesis, Grenoble 1, 2009. http://www.theses.fr/2009GRE10219.
That study focuses on concrete structures submitted to impact loading and is aimed at predicting local damage in the vicinity of an impact zone as well as the global response of the structure. The Discrete Element Method (DEM) seems particularly well suited in this context for modeling fractures. An identification process of DEM material parameters from macroscopic data (Young's modulus, compressive and tensile strength, fracture energy, etc. ) will first be presented for the purpose of enhancing reproducibility and reliability of the simulation results with DE samples of various sizes. Then, a particular interaction, between concrete and steel elements, was developped for the simulation of reinforced concrete. The discrete elements method was validated on quasi-static and dynamic tests carried out on small samples of concrete and reinforced concrete. Finally, discret elements were used to simulate impacts on reinforced concrete slabs in order to confront the results with experimental tests. The modeling of a large structure by means of DEM may lead to prohibitive computation times. A refined discretization becomes required in the vicinity of the impact, while the structure may be modeled using a coarse FE mesh further from the impact area, where the material behaves elastically. A coupled discrete-finite element approach is thus proposed: the impact zone is modeled by means of DE and elastic FE are used on the rest of the structure. An existing method for 3D finite elements was extended to shells. This new method was then validated on many quasi-static and dynamic tests. The proposed approach is then applied to an impact on a concrete structure in order to validate the coupled method and compare computation times
Rousseau, Jessica. "Modélisation numérique du comportement dynamique de structures sous impact sévère avec un couplage éléments discrets / éléments finis." Phd thesis, Grenoble 1, 2009. http://tel.archives-ouvertes.fr/tel-00411870.
L'application de la méthode des éléments discrets sur des structures de grandes dimensions est limitée par le nombre d'éléments discrets nécessaires. Pour garder la qualité de prédiction locale et rendre cette méthode adaptée à l'échelle d'une structure, celle-ci est couplée à la méthode des éléments finis dans les parties qui ne sont pas soumises à d'importantes discontinuités. Cette approche couplée permet des gains de temps importants, tant pour la modélisation que la pour la simulation.
Une partie importante de cette thèse concerne le développement et la validation du modèle éléments discrets de béton armé. Ce travail propose une optimisation du processus d'identification des paramètres locaux du modèle discret afin de le rendre plus prédictif en ce qui concerne le béton. Ensuite, une liaison particulière, entre éléments discrets d'acier et de béton, a été conçue pour la simulation du béton armé. Enfin, elle a été utilisée pour la simulation d'impacts sur des dalles en béton armé afin de confronter les résultats à des essais expérimentaux.
La deuxième partie du travail de thèse traite de la méthode de couplage entre éléments discrets et éléments finis. Une méthode existante pour les éléments finis volumiques a été étendue aux éléments finis de type coque. Enfin, la méthode de couplage a été utilisée pour simuler un impact sur une structure de type enceinte de confinement.
Chabaud, Laurent. "L'arme numérique : essai sur la dématérialisation des infractions pénales." Electronic Thesis or Diss., Université de Montpellier (2022-....), 2023. http://www.theses.fr/2023UMOND043.
The development of the Internet, and of digital technology in general, has facilitated the commission of a large number of offences, and has made its entry into most branches of criminal law. However, there is still one branch of criminal law where digital technology has not made its entry: offences against the physical integrity of the person. Doesn't this logical rejection raise questions? The development of objects connected to the Internet means that such attacks are becoming a reality. The possibility of such attacks must therefore be incorporated into the Penal Code. The first part of this paper proposes to explore this possibility by bringing together the notions of weapon and digital to create the notion of digital weapon. Although these notions may seem antinomic, they are in fact relatively close. Their integration into the penal code shows that they obey the same mechanism: sanctioning the use of a particular tool - a weapon or a digital device - to commit an offence. We therefore propose a paradigm shift in the analysis of the weapon to bring these notions closer together. This re-theorization of the weapon around its function, which we call the mode of perpetration, enables us to take better account of the dematerialization of offences. The second part sets out to extend the regime of the "mode of perpetration" weapon to include the digital weapon, thereby strengthening the economic efficiency of the law in the fight against cybercrime. In particular, this allows us to take a global approach to cybercrime, favoring proactive rather than merely reactive analysis
Orengo, José Ramon. "Modélisation numérique des structures en béton armé." Phd thesis, Ecole Nationale des Ponts et Chaussées, 1990. http://tel.archives-ouvertes.fr/tel-00529365.
Andami, Ovono Armel. "Équations de diffusion paramétrée par la portée des interactions à longue distance." Poitiers, 2009. http://theses.edel.univ-poitiers.fr/theses/2009/Andami-Ovono-Armel/2009-Andami-Ovono-Armel-These.pdf.
This thesis is devoted to a quasilinear parabolic equation in which the diffusion is defined by the length of different non local interactions. As regards stationary problem, having shown the results of existence, uniqueness and continuity. We introduce a general criterion of inversibility later depending on parameter, this very important criterion is going to allow us in example of application to find well known results when parameter will be equal to the diameter of domain. We give then a fundamental result of comparison of solutions in the case of radial symmetrical solutions and a general implementation of count of solutions. Finally we give some numerical applications using a method of fixed point and Newton’s method to illustrate these results. As regards parabolic problem having shown existence of global attractor associated to our problem, we show an estimate L∞ of solution according to estimate Lq, q >1 by using Moser’s iteration
Torrenti, Jean-Michel. "Comportement multiaxial du béton : aspects expérimentaux et modélisation." Phd thesis, Ecole Nationale des Ponts et Chaussées, 1987. http://tel.archives-ouvertes.fr/tel-00529740.
Pinto, Barbosa Mônica. "Semi-rigidité des nœuds d'ossatures en béton armé : simulations numériques." Lyon, INSA, 1992. http://www.theses.fr/1992ISAL0035.
Within the framework of finite element modelling of reinforced concrete structure the present study investigates the behaviour of beam-column connexion submitted alternate cyclic loading. The objective of this work is to simulate the behaviour of a frame Joint, to show the mechanisms observed and to contribute to the construction of models which takes them into account. This report is structured in three chapters : The first chapter presents a state-of-the-art of the experimental and numerical studies in this field, with particular reference to the semi-rigidity concept. It includes a discussion of the mechanisms taken into account in the design of frame Joints, and points out the assumptions and options selected. In the second part, the analytical models used are presented, as well as the numerical methods which are best suited. The last chapter is dedicated to the numerical simulation of the reinforced concrete frame joints under alternate cyclic loading. The deformation mechanisms are exemplified and a number of recommendations towards research needs are proposed
Furet, Agathe. "Modélisations expérimentale et numérique d'ouvrages pare-blocs modulaires : Application à la technologie Bloc Armé®." Thesis, Université Grenoble Alpes, 2020. http://www.theses.fr/2020GRALI038.
This Cifre thesis investigates the impact response of protective structures based on the Bloc Armé® technology, developed by Géolithe Innov and Géolithe. This structure is made of concrete blocks linked by vertical and horizontal metal reinforcements. The main innovation lies in the reinforcement system which ensures the bonding of the blocks and gives the structure an ability to distribute the forces and dissipate energy.Two types of real-scale experiments permit to characterize the dynamic response of the structure. Firstly, the structure laid horizontally on a support layer is subjected to high- energy impacts (2000 kJ) by freely dropping of a projectile. Secondly, lower energy impact tests (125 kJ) are carried out by horizontal impact on a vertical wall of limited dimensions. Reduced models of the structure, at ¼ scale, are also tested under impact in the laboratory. This campaign permits to test many walls of different configurations under various impact conditions. These experimental campaigns illustrate the deformation mechanisms under localized dynamic solicitation for this kind of articulated structure. The different displacement modes of vertical walls and several phenomena dissipating impact energy are highlighted and quantified. The numerous measurements made during the tests constitute an important experimental database, supporting the development of the numerical model.A numerical model, developed with the finite differences method, is proposed for this structure. A realistic approach is followed for the modeling: each element of the structure is modeled explicitly. A simple model is deliberately considered for the concrete constituting the blocks. The model is calibrated based on values from the literature and measurements made specifically. The comparison of impact simulations results with experimental ones attests of the ability of the model in reproducing the global dynamic behavior of the structure and in estimating its residual displacement, in particular. The model quantifies the energy dissipation resulting from plasticization of the concrete blocks and from friction in the structure.The model is then used to simulate the response of walls of various geometries and under high energy impact. The outlooks of this work are to propose a robust model able to simulate the structure response to impacts with energies up to 5,000 kJ, considering structures with complex geometries
Книги з теми "Arme numérique":
France. Service historique de l'armée de l'air. Des armes secrètes allemandes aux fusées françaises: Répertoire numérique détaillé du fonds Hautefeuille, 1927-1997... Vincennes: Service historique de l'armée de l'air, 2000.
Olivier, Borel, Droulier Stéphane, and France. Armée de l'air. Service historique., eds. Des armes secrètes allemandes aux fusées françaises: Répertoire numérique détaillé du fonds Hautefeuille, 1927-1997. [Vincennes: Service historique de l'armée de l'air], 2000.
éd, Poinsot Jean-Marc, ed. Les artistes contemporains et l'archive: Sens du temps et mémoire à l'ère de la numérisation. Rennes: Presses universitaires de Rennes, 2004.
Coicaud, Jean-Marc. L' introuvable démocratie autoritaire: Les dictatures du cône sud, Uruguay, Chili, Argentine (1973-1982). Paris: L'Harmattan, 1996.
Navas-Sabater, Juan. Telecommunications and information services for the poor: Toward a strategy for universal access. Washington, D.C: World Bank, 2002.
Les artistes contemporains et l'archive: Interrogation sur le sens du temps et de la mémoire à l'ère de la numérisation = Contemporary artists and archives : on the making of time and memory in the digital age. Rennes: Presses Universitaires de Rennes, 2004.
Barsamian, David, Noam Chomsky, and Ervand Abrahamian. Retargeting Iran. City Lights Books, 2020.
Частини книг з теми "Arme numérique":
Coutinho, Ana Paula. "Plaisir du texte et imaginaire numérique de la littérature, à partir de François Bon." In Plaisirs de lire: é/etats de l’art, 75–85. FLUP-ILC, 2021. http://dx.doi.org/10.21747/978-989-54784-9-1/lib27a6.
Sofo, Giuseppe. "La traduction à l’ère numérique : Histoire, évolution et perspectives de la rencontre entre la traduction et l’intelligence artificielle." In Human Translation and Natural Language Processing Towards a New Consensus? Venice: Fondazione Università Ca’ Foscari, 2023. http://dx.doi.org/10.30687/978-88-6969-762-3/002.
Звіти організацій з теми "Arme numérique":
Kira, Beatriz, Rutendo Tavengerwei, and Valary Mumbo. Points à examiner à l'approche des négociations de Phase II de la ZLECAf: enjeux de la politique commerciale numérique dans quatre pays d'Afrique subsaharienne. Digital Pathways at Oxford, March 2022. http://dx.doi.org/10.35489/bsg-dp-wp_2022/01.