Дисертації з теми "Anatomical simulator"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-19 дисертацій для дослідження на тему "Anatomical simulator".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Dicko, Ali Hamadi. "Construction of musculoskeletal systems for anatomical simulation." Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENM084/document.
Повний текст джерелаThe use of virtual humans has spread in various activities in recent years.Beyond virtual surgery, virtual bodies are increasingly used to design medical devices, vehicles, and daily life hardware more generally.They also turn out to be extraordinary supports to learn anatomy.Recent movies (Avatar, Lord of the Rings, etc) demonstrated that anatomy and biomechanics can be used to design high-quality characters.However, reproducing the behavior of anatomical structures remains a complex task, and a great amount and variety of knowledge is necessary for setting up high quality simulations.This makes the modeling of human body for simulation purposes an open problem, a tedious task, but also a fascinating research subject.Through this PhD, we address the problem of the construction of biomechanical models of the musculoskeletal systems for several domains : animation, biomechanics and teaching.Our goal is to simplify the entire process of model design by making it more intuitive and faster.Our approach is to address each difficulty : the representation and use of anatomical knowledge, the geometrical modeling and the efficient simulation of the musculoskeletal system thanks to three novel contributions introduced during these research works.Our first contribution focuses on the biomechanical construction of a hybrid model of lumbar spine.In this work, we show that hybrid approaches that combine both rigid body systems and finite element models allow interactive simulations, accurate, while respecting the principles of anatomy and mechanics.Our second contribution addresses the problem of the complexity of anatomical, physiological and functional knowledge.Based on a novel ontology of anatomical functions of the human body, we introduce a novel pipeline to automatically build models that simulate physiological functions of our bodies.The ontology allows us to extract detailed knowledge using simple queries.The outputs of these queries are used to set up simulation models of the functional aspects as they were formalized and described by anatomists.Finally our third contribution, the anatomy transfer, allows the mapping of available geometrical and mechanical models to the morphology of any specific individual.This novel registration method enables the automatic construction of the internal anatomy of any character defined by his skin, by transferring organs from a reference character.It allows to overcome the need to re-construct these geometries for each new simulation, and it contributes to accelerate the simulations setup for a range of people with different morph
Galdames, Grunberg Francisco José. "Brain magnetic resonance image segmentation for the construction of an anatomical model dedicated to mechanical simulation." Tesis, Universidad de Chile, 2012. http://www.repositorio.uchile.cl/handle/2250/112056.
Повний текст джерелаDurante una neurocirugía se debe contar con información anatómica precisa, la cual es comúnmente obtenida por medio de un registro entre la posición del paciente y datos pre-operatorios. Uno de los principales problemas para realizar este registro es la deformación del cerebro durante la cirugía, fenómeno conocido como Brain Shift. Para solucionar este problema se han creado modelos mecánicos del cerebro, con los cuales es posible aproximar la deformación real. Estos modelos mecánicos requieren un modelo anatómico del paciente, el cual se obtiene, en la mayor parte de los casos, por medio de una segmentación manual o semi-manual. El objetivo de esta tesis es mejorar la obtención del modelo anatómico, proponiendo un método automático para obtener un modelo anatómico del cerebro, adaptado a la anatomía particular del paciente y adecuado para un posterior modelamiento mecánico. El método propuesto realiza una pre-segmentación del cerebro, seguida de una segmentación basada en modelos deformables para identificar las estructuras anatómicas más relevantes para el modelamiento mecánico. Se incluyen las estructuras comúnmente utilizadas en la literatura: superficie cortical, superficie interna del cráneo y ventrículos. Además, se incluyen las membranas internas del cerebro: falx cerebri y tentorium cerebelli. Estas membranas se han incorporado en los modelos de muy pocas publicaciones, aun cuando su importancia es reconocida en la literatura. La segmentación por modelos deformables que se ha implementado está principalmente basada en mallas simplex, las cuales son duales topológicos de las mallas de triángulos. Para aprovechar las cualidades complementarias de estas dos representaciones, se ha desarrollado un nuevo método de transformación entre ellas. Nuestro método usa una interpolación geométrica basada en la distancia a los planos tangentes a los vértices de las mallas. El método de transformación fue evaluado usando mallas estándar y obtuvo excelentes resultados al compararlo con el método actualmente más usado, el cual emplea el centro de gravedad de las caras de las mallas. En nuestro método de segmentación las estructuras son segmentadas de manera secuencial y respetando las relaciones anatómicas entre ellas. La segmentación obtenida fue evaluada empleando las bases de datos en linea más usadas (BrainWeb, IBSR, SVE). La segmentación de cada estructura fue evaluada de manera independiente y se realizaron algunas comparaciones con métodos de segmentación populares y establecidos, obteniendo resultados superiores. Las segmentaciones de la superficie cortical, la superficie interna del cráneo y los ventrículos fueron evaluadas usando los indices de Jaccard (J) y Dice (κ). Los resultados para la superficie cortical fueron: J = 0,904 y κ = 0,950 en BrainWeb; J = 0,902 y κ = 0,948 en IBSR; J = 0,946 y κ = 0,972 en SVE. Los resultados para la superficie interna del cráneo fueron J = 0,945 y κ = 0,972 en BrainWeb. Los resultados para los ventrículos fueron: J = 0,623 y κ = 0,766 en IBSR. Las segmentaciones de las membranas internas del cerebro fueron evaluadas midiendo la distancia entre nuestra segmentación y la posición estimada de las membranas en la base de datos IBSR. La distancia media para el tentorium cerebelli fue 1,673 mm, y para el falx cerebri fue 0,745 mm.
Wilson, Timothy Lyle. "Using MR anatomically simulated normal image to reveal spect finited resolution effects." Thesis, Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/17341.
Повний текст джерелаFischer, Shain Ann. "A Three-Dimensional Anatomically Accurate Finite Element Model for Nerve Fiber Activation Simulation Coupling." DigitalCommons@CalPoly, 2015. https://digitalcommons.calpoly.edu/theses/1365.
Повний текст джерелаDiLorenzo, Paul Carmen. "Breathing, laughing, sneezing, coughing model and control of an anatomically inspired, physically-based human torso simulation /." Diss., [Riverside, Calif.] : University of California, Riverside, 2009. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3350078.
Повний текст джерелаIncludes abstract. Title from first page of PDF file (viewed January 28, 2010). Available via ProQuest Digital Dissertations. Includes bibliographical references (p. 100-106).
Egger, Robert [Verfasser], and Marcel [Akademischer Betreuer] Oberländer. "Simulation of sensory-evoked signal flow in anatomically realistic models of neural networks / Robert Egger ; Betreuer: Marcel Oberländer." Tübingen : Universitätsbibliothek Tübingen, 2016. http://d-nb.info/1164168851/34.
Повний текст джерелаHao, Guoliang. "Imaging of the atria and cardiac conduction system : from experiment to computer modelling." Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/imaging-of-the-atria-and-cardiac-conduction-system--from-experiment-to-computer-modelling(3e5dba52-70f3-4fa8-890d-adfe2380086c).html.
Повний текст джерелаNehring, Wendy M., and Felissa R. Lashley. "Nursing Simulation: A Review of the Past 40 Years." Digital Commons @ East Tennessee State University, 2009. https://dc.etsu.edu/etsu-works/6706.
Повний текст джерелаGinsburger, Kévin. "Modeling and simulation of the diffusion MRI signal from human brain white matter to decode its microstructure and produce an anatomic atlas at high fields (3T)." Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLS158/document.
Повний текст джерелаDiffusion Magnetic Resonance Imaging of water in the brain has proven very useful to establish a cartography of brain connections. It is the only in vivo modality to study anatomical connectivity. A few years ago, it has been shown that diffusion MRI is also a unique tool to perform virtual biopsy of cerebral tissues. However, most of current analytical models (AxCaliber, ActiveAx, CHARMED) employed for the estimation of white matter microstructure rely upon a basic modeling of white matter, with axons represented by simple cylinders and extra-axonal diffusion assumed to be Gaussian. First, a more physically plausible analytical model of the human brain white matter accounting for the time-dependence of the diffusion process in the extra-axonal space was developed for Oscillating Gradient Spin Echo (OGSE) sequence signals. A decoding tool enabling to solve the inverse problem of estimating the parameters of the white matter microstructure from the OGSE-weighted diffusion MRI signal was designed using a robust optimization scheme for parameter estimation. Second, a Big Data approach was designed to further improve the brain microstructure decoding. All the simulation tools necessary to construct computational models of brain tissues were developed in the frame of this thesis. An algorithm creating realistic white matter tissue numerical phantoms based on a spherical meshing of cell shapes was designed, enabling to generate a massive amount of virtual voxels in a computationally efficient way thanks to a GPU-based implementation. An ultra-fast simulation tool of the water molecules diffusion process in those virtual voxels was designed, enabling to generate synthetic diffusion MRI signal for each virtual voxel. A dictionary of virtual voxels containing a huge set of geometrical configurations present in white matter was built. This dictionary contained virtual voxels with varying degrees of axonal beading, a swelling of the axonal membrane which occurs after strokes and other pathologies. The set of synthetic signals and associated geometrical configurations of the corresponding voxels was used as a training data set for a machine learning algorithm designed to decode white matter microstructure from the diffusion MRI signal and estimate the degree of axonal beading. This decoder showed encouraging regression results on unknown simulated data, showing the potential of the presented approach to characterize the microstructure of healthy and injured brain tissues in vivo. The microstructure decoding tools developed during this thesis will in particular be used to characterize white matter tissue microstructural parameters (axonal density, mean axonal diameter, glial density, mean glial cells diameter, microvascular density ) in short and long bundles. The simulation tools developed in the frame of this thesis will enable the construction of a probabilistic atlas of the white matter bundles microstructural parameters, using a mean propagator based diffeomorphic registration tool also designed in the frame of this thesis to register each individual
Perchet, Diane. "Modélisation in-silico des voies aériennes : reconstruction morphologique et simulation fonctionnelle." Phd thesis, Université René Descartes - Paris V, 2005. http://tel.archives-ouvertes.fr/tel-00273244.
Повний текст джерелаDans ce contexte, le projet RNTS RMOD a pour objectif de développer un simulateur morpho-fonctionnel des voies respiratoires pour l'aide au diagnostic, au geste médico-chirurgical et à l'administration de médicaments par inhalation.
Contribuant au projet RMOD, la recherche développée dans cette thèse propose une modélisation in-silico de la structure des voies aériennes supérieures (VAS) et proximales (VAP) à partir d'examens tomodensitométriques (TDM). L'investigation morphologique et la simulation fonctionnelle bénéficient alors de géométries 3D réelles, adaptées au patient et spécifiques des pathologies rencontrées.
La modélisation développée fait coopérer des méthodes originales de segmentation, de construction de surface maillée et d'analyse morpho-fonctionnelle.
La segmentation des VAP est obtenue par un schéma diffusif et agrégatif gouverné par un modèle markovien, dont l'initialisation repose sur l'opérateur de coût de connexion sous contrainte topographique. De cette segmentation, l'axe central de l'arbre bronchique est extrait de manière robuste et précise en combinant information de distance, propagation de fronts, et partition conditionnelle locale. Cet axe central est représenté sous forme d'une structure hiérarchique multivaluée synthétisant caractéristiques topologiques et géométriques de l'arbre bronchique. Une surface maillée est ensuite construite en appliquant une procédure de Marching Cubes adaptative, les paramètres des différents filtres mis en jeu étant automatiquement ajustés aux caractéristiques locales du réseau bronchique conditionnellement aux attributs de l'axe central.
La segmentation des VAS repose sur une propagation markovienne exploitant les variations locales de densité. L'initialisation combine morphologie mathématique et information de contour afin de garantir la robustesse à la topologie. Une procédure de type triangulation de Delaunay restreinte à une surface fournit ensuite la représentation maillée des VAS. Il est établi que la topologie et la géométrie des structures complexes composant les VAS sont effectivement préservées.
Pour permettre aux médecins de valider les modèles maillés ainsi construits, un environnement virtuel 3D convivial et interactif a été réalisé. En outre, la morphologie des voies aériennes exo- et endo-luminale est analysée de façon automatique à partir de simulations d'écoulement pour des géométries réelles.
Enfin, une modélisation unifiée des VAP et VAS est obtenue pour la première fois. Elle démontre la pertinence des approches développées. Elle ouvre la voie à la construction de modèles in-silico complets de l'appareil respiratoire ainsi qu'aux études fonctionnelles prenant en compte les paramètres morphologiques susceptibles d'influer localement ou globalement sur la dynamique des écoulements.
Santos, Clayton Eduardo dos. "Modelagem computacional de estruturas anatômicas em 3D e simulação de suas imagens radiográficas." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/18/18133/tde-15102008-141521/.
Повний текст джерелаThe conventional methods of quality control applied to radio diagnosis are the best way to have assured good quality of the produced images. Due the amount of variables to consider, the study of particular issues of the process of formation of radiological images requires complementary computational tools. However, the computational voxel based phantoms are not suitable to represent the morphometrical variations, intended for test simulations with image based diagnosis. This work developed a new type of computational phantom, based on 3D modelling. It has the same advantages of the conventional ones, without some of their restrictions. The modeling tool employed, Blender, is available on internet for free download. The project uses the technique called box modeling, which consists in the deformation of a primitive form (a cube, in this case) until it presents a similar form to that it is wanted to model. In order to achieve it, some images, obtained from anatomy atlas and a skeleton pictures obtained from University of Mogi das Cruzes, were used as reference. Were built models from skeletal system, internal organs and external human body anatomy. The applied methodology allowed model´s parameter settings on the modelling tool. This option was presented by means of intestine format variation and increase of adipose tissue on the mesh that represents skin. The simulation of radiological images was done by means of x-ray mass attenuation coefficients, bones and tissues and models with diferent physical characteristics. This flexibility allows the analysis and forecasting of the influences that morphometrical differences of individual implies on images, revealing an important tool that complements the conventional quality control tools.
Garcia, Diogo de Freitas Valeiro. "Uso dos modelos SurgeMan®, TraumaMan® e Porcino na prática cirúrgica do curso Suporte Avançado de Vida no Trauma (SAVT)." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/5/5132/tde-01032017-122338/.
Повний текст джерелаIntroduction: Universities and hospitals require the use of suitable alternatives to animals for training wherever possible. The cost of the currently approved artificial mannequins often makes their use prohibitive in low-income countries. A low cost Brazilian artificial mannequin (SurgeMan®) has been developed. Our primary objective was to determine whether SurgeMan® would have equivalent learner and instructor satisfaction scores compared with the currently approved TraumaMan® and an animal model for the surgical procedures of Advanced Trauma Life Support ATLS®. Our secondary objective was to determine if user satisfaction scores for the SurgeMan® exceeded 80%. Methods: This was a prospective crossover cohort study with 3 models, SurgeMan® (SMan), TraumaMan® (TMan), and an animal model (Landrace pigs). A convenience sample of 36 students enrolled in ATLS® courses was divided into 9 groups, which were monitored by 1 instructor per group throughout the skills station rotations. Each group participated in all skills in each of the 3 models. The procedures performed were tube thoracostomy, cricothyroidotomy, pericardiocentesis, and diagnostic peritoneal lavage (DPL). Psychometric testing was completed by having students and instructors fill out a Likert Scale at the completion of each activity. Students and instructors were also asked about the adequacy of the models for performing the surgical skills, if they would or would not substitute the animal model for the SurgeMan® or the TraumaMan®, and about their preferred model, with and without ethical and financial issues. Results: The animal model and the TraumaMan® performed better than the SurgeMan® for all skills except pericardiocentesis, where there was no difference in the models. When no ethical or financial factors were taken in consideration, 58% of the students and 66% of the instructors chose pigs as their preferred model. When all ethical factors were considered, all students equally recommended the models (SMan 33%, TMan 30%, pigs 33%) and the SurgeMan® was the first choice for the instructors (SMan 66%, TMan 22%, pigs 11%). The students thought all models were adequate for learning ATLS® skills (SMan 81%, TMan 94%, pigs 86%). The Instructors scored only the animal model under 80% (SMan 88%, TMan 100%, pigs 77%) for learning those skills. Conclusion: The TraumaMan® performed better than the SurgeMan® in most procedures. Students and instructors found that both the TraumaMan® and the SurgeMan® are acceptable for learning and teaching ATLS® surgical skills
Fernandes, Fábio António Oliveira. "Biomechanical analysis of helmeted head impacts: novel materials and geometries." Doctoral thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/21227.
Повний текст джерелаA cortiça é um material celular natural capaz de suster quantidades consideráveis de energia. Estas características tornam este material ideal para determinadas aplicações como a proteção de impactos. Considerando equipamentos de segurança passiva pessoal, os materiais sintéticos são hoje em dia os mais utilizados, em particular o poliestireno expandido. Este também é capaz de absorver razoáveis quantidades de energia via deformação permanentemente. Por outro lado, a cortiça além de ser um material natural, é capaz de recuperar grande parte da sua forma após deformada, uma característica desejada em aplicações com multi-impacto. Neste trabalho é efetuada uma avaliação da aplicabilidade da cortiça em equipamentos de segurança pessoal, especificamente capacetes. Vários tipos de cortiça aglomerada foram caracterizados experimentalmente. Impactos foram simulados numericamente para avaliar a validade dos modelos constitutivos e as propriedades utilizadas para simular o comportamento da cortiça. Capacetes foram selecionados como caso de estudo, dado as energias de impacto e repetibilidade de impactos a que estes podem ser sujeitos. Para avaliar os capacetes de um ponto de vista biomecânico, um modelo de cabeça humana em elementos finitos foi desenvolvido. Este foi validado de acordo com testes em cadáveres existentes na literatura. Dois modelos de capacete foram modelados. Um modelo de um capacete rodoviário feito de materiais sintéticos, o qual se encontra disponível no mercado e aprovado pelas principais normas de segurança de capacetes, que serve de referência. Este foi validado de acordo com os impactos da norma. Após validado, este foi avaliado com o modelo de cabeça humana em elementos finitos e uma análise ao risco de existência de lesões foi efetuado. Com este mesmo capacete, foi concluído que para incorporar cortiça aglomerada, a espessura teria de ser reduzida. Então um novo modelo de capacete foi desenvolvido, sendo este uma espécie de modelo genérico com espessuras constantes. Um estudo paramétrico foi realizado, variando a espessura do capacete e submetendo o mesmo a duplos impactos. Os resultados destes impactos e da análise com o modelo de cabeça indicaram uma espessura ótima de 40 mm de cortiça aglomerada, com a qual o capacete tem uma melhor resposta a vários impactos do que se feito de poliestireno expandido.
Cork is a natural cellular material capable of withstanding considerable amounts of energy. These features make it an ideal material for some applications, such as impact protection. Regarding personal safety gear, synthetic materials, particularly expanded polystyrene, are typically used. These are also able to absorb reasonable amounts of energy by deforming permanently. On the other hand, in addition to cork being a natural material, it recovers almost entirely after deformation, which is a desired characteristic in multi-impact applications. In this work, the applicability of agglomerated cork in personal safety gear, specifically helmets, is analysed. Different types of agglomerated cork were experimentally characterized. These experiments were simulated in order to assess the validity of the constitutive models used to replicate cork's mechanical behaviour. In order to assess the helmets from a biomechanical point of view, a finite element human head model was developed. This head model was validated by simulating the experiments performed on cadavers available in the literature. Two helmet models were developed. One of a motorcycle helmet made of synthetic materials, which is available on the market and certified by the main motorcycle helmets safety standards, being used as reference. This helmet model was validated against the impacts performed by the European standard. After validated, this helmet model was analysed with the human head model, by assessing its head injury risk. With this helmet, it was concluded that a thinner helmet made of agglomerated cork might perform better. Thus, a new helmet model with a generic geometry and a constant thickness was developed. Several versions of it were created by varying the thickness and subjecting them to double impacts. The results from these impacts and the analyses carried out with the finite element head model indicated an optimal thickness of 40 mm, with which the agglomerated cork helmet performed better than the one made of expanded polystyrene.
Casas, Llogari. "Creació de models humans sintètics, home i dona, aptes per a aplicacions tecnològiques i científiques." Doctoral thesis, Universitat de Barcelona, 2015. http://hdl.handle.net/10803/386515.
Повний текст джерелаCozer, Thamara Cristina. "Análise de elementos traço presentes em tecidos mamários canino através da técnica de fluorescência de raios X." Universidade Tecnológica Federal do Paraná, 2016. http://repositorio.utfpr.edu.br/jspui/handle/1/1842.
Повний текст джерелаEstudos realizados com cães apontam que dos grupos tumorais analisados, os de mama representam cerca de 25% a 50% dos tipos de tumores. Deste total, metade é considerado maligno. Apesar de representar um valor considerável de malignidade, estudos nesta área são poucos representativos e escassos na literatura. É de conhecimento que os tumores são causados por mudanças químicas e bioquímicas que ocorrem na célula. Atualmente, pesquisas são realizadas para entender o comportamento dessas alterações e por este motivo é de grande valia conhecer os elementos traço presentes nestes tecidos. Para esta finalidade a técnica mais empregada é a de ED-XRF (Fluorescência de Raios X de Dispersão de Energia), uma vez que é uma técnica analítica não destrutiva que permite determinar e quantificar a composição elementar das amostras, porém não identifica elementos com baixos números atômicos (menor que Z=10). Foram analisadas 56 amostras de tecido mamário canino benignas e malignas, fixadas em formalina a 10% tamponada e mantida à temperatura ambiente. Primeiramente para a quantificação dos elementos traço Ca, Fe, Cu e Zn foram determinadas as curvas de calibração de padrões diluídos em água, com concentrações de Ca, Fe, Cu e Zn, variando de 400 mg/kg a 35 mg/kg, de 20 mg/kg a 2 mg/kg, de 10 mg/kg a 1 mg/kg e de 100 mg/kg a 9 mg/kg, respectivamente. As medições foram submetidas à técnica de ED-XRF utilizando um tubo de raios X com ânodo de prata e técnica de exposição de 30 kV e 100uA e um tempo de exposição de 1000 segundos (incerteza ≤ 3%). O código XRMC (X-Ray Monte Carlo) foi utilizado para validação do método experimental, que tem o objetivo de simular computacionalmente as respostas esperadas para os ensaios experimentais validando assim a eficácia da metodologia. As concentrações dos elementos traço obtidas foram analisadas estatisticamente onde verificou-se uma variação significativa do elemento Zn, estando este presente em maior concentração no tecido mamário maligno do que no benigno. Este resultado pode estar relacionado à presença deste elemento nas matrizes de metaloproteinases, e em neoplasias malignas estão mais concentradas porque há característica de invasão tumoral neste tipo de neoplasia. Em outra comparação estatística pode-se verificar que os elementos traços Fe, Cu e Zn tem concentração equivalente tanto na região central do tumor tanto quanto na periferia, com exceção do Ca, este concentrando-se mais na região tumoral o que pode se dever às calcificações. Estudos nessa área são de grande potencial por permitir um melhor entendimento do processo patológico em tumores mamários caninos.
Studies with dogs show that the breast cancer represent about 25% to 50% of tumor types. Of this total, half is considered malignant. Despite representing a considerable amount of malignancy, studies in this area are few representative and scarce in the literature. It is known that tumors are caused by chemical and biochemical changes that occur in the cell. Currently, surveys are conducted to understand the behavior of these changes and for this reason, it is of great value to know the trace elements present in these tissues. For this purpose, the most common technique is to ED-XRF (X-Ray Fluorescence Energy Dispersion) since it is a non-destructive analytical technique to determine and quantify the elemental composition of the samples, although it doesn’t identify elements with low atomic numbers (less than Z= 10). Were analyzed 56 samples of canine breast tissue benign and malignant, fixed in 10% buffered formalin and kept at ambient temperature. First, for the measurement of trace elements Ca, Fe, Cu and Zn were determined standards for calibration curves diluted in water to concentrations of Ca, Fe, Cu and Zn, ranging from 400 mg/kg to 35 mg/kg, from 20 mg/kg to 2 mg/kg, from 10 mg/kg to 1 mg/kg and from 100 mg/kg to 9 mg/kg, respectively. Measurements were subjected to ED-XRF technique using an X-ray tube with silver anode and exposure technique of 30 kV and 100 uA and exposure time of 1000 seconds (uncertainty ≤ 3%). The XRMC code (X-Ray Monte Carlo) was used for validation of experimental method, which is intended to simulate by computer the expected responses for experimental tests, therefore validating the methodology efficiency. The concentrations of trace elements obtained were analyzed statistically where there was a significant variation of Zn element, the latter being present in higher concentration in malignant breast tissue than benign. This result may be related to the presence of this element in the matrix metalloproteinases, and malignant neoplasms are more concentrated because there are characteristic of tumor invasion in this type of neoplasm. In another statistical comparison it can be seen that the trace elements Fe, Cu and Zn is equivalent concentration both in the central region of the tumor as well as in the periphery, with the exception of Ca, this focusing more on the tumor region may be due to calcifications. Studies in this area are of great potential for allowing a better understanding of the disease process in canine mammary tumors.
Fenollosa, Artés Felip. "Contribució a l'estudi de la impressió 3D per a la fabricació de models per facilitar l'assaig d'operacions quirúrgiques de tumors." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/667421.
Повний текст джерелаLa presente tesis doctoral se ha centrado en el reto de conseguir, mediante Fabricación Aditiva (FA), modelos para ensayo quirúrgico, bajo la premisa que los equipos para obtenerlos tendrían que ser accesibles al ámbito hospitalario. El objetivo es facilitar la extensión del uso de modelos como herramienta de preparación de operaciones quirúrgicas, transformando la práctica médica actual de la misma manera que, en su momento, lo hicieron tecnologías como las que facilitaron el uso de radiografías. El motivo de utilizar FA, en lugar de tecnologías más tradicionales, es su capacidad de materializar de forma directa los datos digitales obtenidos de la anatomía del paciente mediante sistemas de escaneado tridimensional, haciendo posible la obtención de modelos personalizados. Los resultados se centran en la generación de nuevo conocimiento para conseguir equipamientos de impresión 3D multimateriales accesibles que permitan la obtención de modelos miméticos respecto a los tejidos vivos. Para facilitar la buscada extensión de la tecnología, se ha focalizado en las tecnologías de código abierto como la Fabricación por Hilo Fundido (FFF) y similares basadas en líquidos catalizables. Esta investigación se alinea dentro de la actividad de desarrollo de la FA en el CIM UPC, y en este ámbito concreto con la colaboración con el Hospital Sant Joan de Déu de Barcelona (HSJD). El primer bloque de la tesis incluye la descripción del estado del arte, detallando las tecnologías existentes y su aplicación al entorno médico. Se han establecido por primera vez unas bases de caracterización de los tejidos vivos – principalmente blandos – para dar apoyo a la selección de materiales que los puedan mimetizar en un proceso de FA, a efectos de mejorar la experiencia de ensayo de los cirujanos. El carácter rígido de los materiales mayoritariamente usados en impresión 3D los hace poco útiles para simular tumores y otras referencias anatómicas. De forma sucesiva, se tratan parámetros como la densidad, la viscoelasticidad, la caracterización de materiales blandos en la industria, el estudio del módulo elástico de tejidos blandos y vasos, la dureza de los mismos, y requerimientos como la esterilización de los modelos. El segundo bloque empieza explorando la impresión 3D mediante FFF. Se clasifican las variantes del proceso desde el punto de vista de la multimaterialidad, esencial para hacer modelos de ensayo quirúrgico, diferenciando entre soluciones multiboquilla y de mezcla en el cabezal. Se ha incluido el estudio de materiales (filamentos y líquidos) que serían más útiles para mimetizar tejidos blandos. Se constata como en los líquidos, en comparación con los filamentos, la complejidad del trabajo en procesos de FA es más elevada, y se determinan formas de imprimir materiales muy blandos. Para acabar, se exponen seis casos reales de colaboración con el HJSD, una selección de aquellos en los que el doctorando ha intervenido en los últimos años. El origen se encuentra en la dificultad del abordaje de operaciones de resección de tumores infantiles como el neuroblastoma, y en la iniciativa del Dr. Lucas Krauel. Finalmente, el Bloque 3 desarrolla numerosos conceptos (hasta 8), actividad completada a lo largo de los últimos cinco años con el apoyo de los medios del CIM UPC y de la actividad asociada a trabajos finales de estudios de estudiantes de la UPC, llegándose a materializar equipamientos experimentales para validarlos. La investigación amplia y sistemática al respecto hace que se esté más cerca de disponer de una solución de impresión 3D multimaterial de sobremesa. Se determina que la mejor vía de progreso es la de disponer de una pluralidad de cabezales independientes, a fin de capacitar la impresora 3D para integrar diversos conceptos estudiados, materializándose una posible solución. Para cerrar la tesis, se plantea cómo sería un equipamiento de impresión 3D para modelos de ensayo quirúrgico, a fin de servir de base para futuros desarrollos.
Fine, David Robert. "The use of anatomically based models for the analysis of imaged tracer experiments in humans." Thesis, 1994. https://hdl.handle.net/10539/23778.
Повний текст джерелаOrgan function is often characterised using imaging techniques. In particular a tracer is often used which does not react with tissue, is low in concentration, follows body fluid flows and is distinguishable from the observed system and thus measurable. These requirements ensure linear characteristics of the tracer. In this thesis, these linear characteristics are used to develop a generalised mathematical theory to determine organ function from imaged tracer experiments. The theory is based on anatomical and physiological information for single and multiple input organs. [Abbreviated Abstract. Open document to view full version]
MT2018
"Extracellular potentials from action potentials of anatomically realistic neurons and neuronal populations." Thesis, 2005. http://hdl.handle.net/10413/1664.
Повний текст джерелаThesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2005
Lee, Wongi. "Space analysis of the maxillary anterior bone geometry to understand anatomical limitation: and implant simulation study using cone-beam computed tomography (CBCT)." Thesis, 2016. https://hdl.handle.net/2144/18718.
Повний текст джерела2018-09-28T00:00:00Z