Дисертації з теми "Analytic Workbench"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-26 дисертацій для дослідження на тему "Analytic Workbench".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
D'Souza, Arun. "PathCaseMAW: A Workbench for Metabolomic Analysis." Case Western Reserve University School of Graduate Studies / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=case1222895452.
Повний текст джерелаD'Souza, Arun. "PathCase [superscript] MAW a workbench for metabolomic analysis institution /." online version, 2009. http://rave.ohiolink.edu/etdc/view.cgi?acc%5Fnum=case1222895452.
Повний текст джерелаPartl, Tomáš. "Využití programu ANSYS Workbench v silnoproudé elektrotechnice." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217897.
Повний текст джерелаKučera, Petr. "Teplotní analýza asynchronního stroje pomocí programu Ansys Workbench." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219756.
Повний текст джерелаSedláčková, Petra. "Využití prostředí ANSYS Workbench pro teplotní výpočty elektrických strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218803.
Повний текст джерелаWeiler, Bradley. "Finite Element Method Based Analysis and Modeling in Rotordynamics." University of Cincinnati / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1510917784717535.
Повний текст джерелаHert, Ronald Sterling. "A Study of One Computer-Driven Text Analysis Package for Collegiate Student Writers." Thesis, University of North Texas, 1988. https://digital.library.unt.edu/ark:/67531/metadc331597/.
Повний текст джерелаPánis, Vladimír. "Deformačně-napěťová analýza páteřního segmentu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228374.
Повний текст джерелаGonzalez, Campos David Jonathan. "A Study of Shock Analysis Using the Finite Element Method Verified with Euler-Bernoulli Beam Theory; Mechanical Effects Due to Pulse Width Variation of Shock Inputs; and Evaluation of Shock Response of a Mixed Flow Fan." DigitalCommons@CalPoly, 2014. https://digitalcommons.calpoly.edu/theses/1294.
Повний текст джерелаMánek, Petr. "Analýza drážního soustrojí motor - generator." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219755.
Повний текст джерелаMičola, Ivo. "Návrh řadicího mechanismu bezprodlevové převodovky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231420.
Повний текст джерелаMaddela, Naveen. "Finite Element Analysis of Railway Track Wooden Sleeper." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Знайти повний текст джерелаHorálek, Lukáš. "Výpočet chlazení asynchronního stroje pomocí programu Ansys CFX." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318176.
Повний текст джерелаBartoň, Petr. "Teplotní analýza synchronního stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219921.
Повний текст джерелаKarásek, Ladislav. "Návrh vysokootáčkového motoru 350kW 40 000min-1." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242110.
Повний текст джерелаPulava, Oleksandr. "Šestiválcový vznětový motor pro užitková vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378397.
Повний текст джерелаDobiáš, Pavel. "Působení sekundárních elektrických přístrojů na oteplení skříně rozváděče." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242137.
Повний текст джерелаDias, Aleš. "Jeřáb radiální portálový." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254381.
Повний текст джерелаPoduška, Libor. "Návrh konstrukčního řešení autoklávu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241853.
Повний текст джерелаBzduch, Pavel. "Využití počítačové grafiky v silnoproudé elektrotechnice." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217593.
Повний текст джерелаBártů, Jan. "Analýza mechanického namáhání při zkratu ve vzduchem izolovaném rozváděči vn." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-317035.
Повний текст джерелаChun-YuChang and 張群郁. "Analysis of 3D Member Structures by Software ANSYS WORKBENCH." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/86190500147217013424.
Повний текст джерела國立成功大學
土木工程學系碩博士班
100
In recent years, building design and construction technology have been developed to enhance the strength and safety of the structures, including steel structures which are widely used in public works. Three dimensional truss-like steel frame which behaves with very high strength and stiffness is widely used. Although it is already clear knowledge as structures vibrate in elastic stage, it will become much more complicated when it vibrate beyond elastic limit and the material goes into yielding stage. The structures behaves nonlinearly. In order to investigate the dynamic behavior of the three dimensional truss-like steel frame, computer-aided engineering analysis software package ANSYS Workbench is used here in. Dynamic behaviors of the mentioned structure, such as stress, deflections, ultimate loads, and failure modes…etc. are detected in detail. It is expected to help engineers to face the design work in the future.
Joshi, Riddhi. "Design and Fatigue Analysis of an LWD Drill Tool." Thesis, 2019. http://hdl.handle.net/1805/19984.
Повний текст джерелаPrevious works suggest that 80% to 90% of failures observed in the rotary machines are accounted for fatigue failure. And it is observed that cyclic stresses are more critical than steady stresses when the failure occurred is due to fatigue. One of the most expensive industries involving rotary machines is the Oil and Gas industry. The large drilling tools are used for oil extracts on-shore and off-shore. There are several forces that act on a drilling tool while operating below the earth's surface. Those forces are namely pressure, bending moment and torque. The tool is designed from the baseline model of the former tool in Solidworks and Design Molder. Here load acting due to pressure and torque accounts for steady stress i.e., Mean Stress and loading acting due to bending moment account for fluctuating stress i.e., Alternating Stress. The loading and boundary conditions have been adapted from Halliburton’s previous works for the LWD drill tool to better estimate the size of the largest possible transducer. The fatigue analysis of static load cases is carried out in Ansys Mechanical Workbench 19.0 using static structural analysis. The simulation is run to obtain results for total deformation, equivalent stress, and user-defined results. The component is designed for infinite life to calculate the endurance limit. Shigley guidelines and FKM guidelines are compared as a part of a study to select the best possible approach in the current application. The width of the imaging pocket is varied from 1.25 inches to 2.0 inches to accommodate the largest possible transducer without compromising the structural integrity of the tool. The optimum design is chosen based on the stress life theory criteria namely Gerber theory and Goodman Theory.
Yen-BorFang and 方彥博. "Analysis on the Effet of the Noise Factors on the Fatique Reliability Optimization of RCP with PoP Package by a Modified G/L Concept of Optimal Equivalent Solder in ANSYS Workbench." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/96476736880422542525.
Повний текст джерелаTavares, João André Curralo. "Simulação numérica do comportamento ao impacto de estruturas utilizadas em segurança rodoviária." Master's thesis, 2012. http://hdl.handle.net/1822/22686.
Повний текст джерелаEsta dissertação de mestrado aborda a temática das barreiras de segurança rodoviária, com especial foco na viga central (rail) que as compõe. É apresentado um estado da arte composto por diversas informações relativas à composição base destes sistemas de segurança, bem como alguns estudos efetuados na área com recurso a softwares de análise. Com o intuito de estudar o comportamento plástico da viga, foi utilizado o programa Ansys Workbench na sua componente de estudos estruturais estáticos. De forma a validar a utilização deste programa, procedeu-se a um ensaio experimental a dois rails nas instalações da Universidade do Minho, ensaio esse posteriormente simulado em Workbench, com dados obtidos de ensaios de tração de provetes retirados de um terceiro rail. As informações recolhidas dos ensaios de tração possibilitaram delinear o perfil do material utilizado para o fabrico viga, e posterior tratamento da sua curva tensãoextensão. Na fase final da dissertação o Ansys Workbench é utilizado para o estudo das implicações da alteração do expoente de encruamento do material na deformação plástica da viga.
This master degree dissertation addresses the theme of safety road barriers, with special emphasis on the central beam of the system. The state of the art is presented with several information regarding the basic composition of these safety systems, as well as some studies in the area where simulation software has been used. To study the plastic behavior of the beam, Ansys Workbench was used in its static structural studies component. In order to validate the use of this software, an experimental test was conducted in the University of Minho installations. This test was then simulated in Workbench, coupled with data retrieved from several tensile tests done to specimens retrieved from a third rail. The data collected from the tensile tests led to the properties profile of the material used during the manufacturing of the beam, stress-strain curve included. In the final section of this dissertation, Ansys Workbench is used to study what implications the change in the work hardening exponent has on the plastic deformation of the beam.
Carvalho, Cristiano Daniel Ferreira. "Simulação numérica e verificação experimental do comportamento elástoplástico de espumas metálicas." Master's thesis, 2012. http://hdl.handle.net/1822/22706.
Повний текст джерелаEsta dissertação de mestrado analisa o comportamento elásto-plástico de espumas metálicas à compressão, através do estudo numérico e da verificação experimental. No estado da arte são apresentados vários processos de fabrico de espumas metálicas, são apresentadas algumas propriedades mecânicas e físicas das espumas metálicas e alguns estudos numéricos realizados a espumas deste tipo. Foram realizados ensaios experimentais de tração a provetes com o mesmo material utilizado nas espumas, que possibilita delinear o perfil deste material através de uma curva tensão-extensão. Ensaiou-se, experimentalmente, os dois tipos de espumas metálicas utilizadas no estudo, com e sem parede, permitindo uma análise comparativa entre os resultados obtidos numericamente e os obtidos experimentalmente. Para determinar o comportamento mecânico das espumas metálicas numericamente, foi utilizado o software de elementos finitos Ansys Workbench, na opção de estudos estruturais estáticos, permitindo definir a curva carga-deslocamento para cada espuma, analisar a rigidez e energia de deformação de cada espuma e comparar estes parâmetros com os obtidos nos ensaios experimentais. Finalmente, é realizado, também, uma análise comparativa, para um tipo de espuma em estudo, entre dois programas: Ansys Workbench e CosmosWorks.
This Master Thesis analysis the elastic-plastic behavior of metal foams in compression threw the numerical study and experimental validation. In the state of the art, it’s presented several manufacturing processes of metal foams, their mechanical and physical properties and some numerical studies made to them. Experimental traction tests were made to specimens manufactured in the same material used in the metallic foams with the intention of defining a tension-extension curve. It was tested the two types of metal foams used in the study, with and without wall, permitting a comparative analyses between the results obtained numerically and experimentally. To determine the mechanical behavior of the foams in the numerical analysis, it was used the finite elements software Ansys Workbench, using the “Static Structural” option. This permitted to define the load-displacement curve to each, to analyze the rigidity and energy of deformation of foams and compare these parameters with those obtained from experimental tests. Finally, it is also performed a comparative analysis for a foam type under consideration, between two programs: Ansys Workbench and CosmosWorks.
Fundação para a Ciência e a Tecnologia (FCT) - Projeto PTDC/EME-PME/115668/2009