Статті в журналах з теми "AM material development"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "AM material development".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Roberson, David, Corey M. Shemelya, Eric MacDonald, and Ryan Wicker. "Expanding the applicability of FDM-type technologies through materials development." Rapid Prototyping Journal 21, no. 2 (March 16, 2015): 137–43. http://dx.doi.org/10.1108/rpj-12-2014-0165.
Повний текст джерелаKoptioug, Andrey, Lars Erik Rännar, Mikael Bäckström, and Zhi Jian Shen. "New Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)." Materials Science Forum 879 (November 2016): 996–1001. http://dx.doi.org/10.4028/www.scientific.net/msf.879.996.
Повний текст джерелаMohan, Denesh, Zee Khai Teong, Afifah Nabilah Bakir, Mohd Shaiful Sajab, and Hatika Kaco. "Extending Cellulose-Based Polymers Application in Additive Manufacturing Technology: A Review of Recent Approaches." Polymers 12, no. 9 (August 20, 2020): 1876. http://dx.doi.org/10.3390/polym12091876.
Повний текст джерелаGu, Dongdong, Xinyu Shi, Reinhart Poprawe, David L. Bourell, Rossitza Setchi, and Jihong Zhu. "Material-structure-performance integrated laser-metal additive manufacturing." Science 372, no. 6545 (May 27, 2021): eabg1487. http://dx.doi.org/10.1126/science.abg1487.
Повний текст джерелаFu, Wentao, Christoph Haberland, Eva Verena Klapdor, David Rule, and Sebastian Piegert. "Streamlined frameworks for advancing metal based additive manufacturing technologies." Journal of the Global Power and Propulsion Society 2 (January 29, 2018): QJLS4L. http://dx.doi.org/10.22261/jgpps.qjls4l.
Повний текст джерелаRimkus, Arvydas, Mahmoud M. Farh, and Viktor Gribniak. "Continuously Reinforced Polymeric Composite for Additive Manufacturing—Development and Efficiency Analysis." Polymers 14, no. 17 (August 25, 2022): 3471. http://dx.doi.org/10.3390/polym14173471.
Повний текст джерелаArenas, Maria Alejandra Ardila, Dirk Gutkelch, Olaf Kosch, Rüdiger Brühl, Frank Wiekhorst, and Norbert Löwa. "Development of Phantoms for Multimodal Magnetic Resonance Imaging and Magnetic Particle Imaging." Polymers 14, no. 19 (September 20, 2022): 3925. http://dx.doi.org/10.3390/polym14193925.
Повний текст джерелаSchneck, Matthias, Max Horn, Maik Schindler, and Christian Seidel. "Capability of Multi-Material Laser-Based Powder Bed Fusion—Development and Analysis of a Prototype Large Bore Engine Component." Metals 12, no. 1 (December 25, 2021): 44. http://dx.doi.org/10.3390/met12010044.
Повний текст джерелаJunio, Raí Felipe Pereira, Pedro Henrique Poubel Mendonça da Silveira, Lucas de Mendonça Neuba, Sergio Neves Monteiro, and Lucio Fabio Cassiano Nascimento. "Development and Applications of 3D Printing-Processed Auxetic Structures for High-Velocity Impact Protection: A Review." Eng 4, no. 1 (March 8, 2023): 903–40. http://dx.doi.org/10.3390/eng4010054.
Повний текст джерелаWatschke, Hagen, Lennart Waalkes, Christian Schumacher, and Thomas Vietor. "Development of Novel Test Specimens for Characterization of Multi-Material Parts Manufactured by Material Extrusion." Applied Sciences 8, no. 8 (July 25, 2018): 1220. http://dx.doi.org/10.3390/app8081220.
Повний текст джерелаDams, Barrie, Binling Chen, Paul Shepherd, and Richard J. Ball. "Development of Cementitious Mortars for Aerial Additive Manufacturing." Applied Sciences 13, no. 1 (January 3, 2023): 641. http://dx.doi.org/10.3390/app13010641.
Повний текст джерелаCavalcanti, D. K. K., M. D. Banea, and H. F. M. de Queiroz. "Effect of Material on the Mechanical Properties of Additive Manufactured Thermoplastic Parts." Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology 31 (December 28, 2020): 5–12. http://dx.doi.org/10.35219/awet.2020.01.
Повний текст джерелаReza, Arif, Soomin Shim, Seungsoo Kim, Naveed Ahmed, Seunggun Won, and Changsix Ra. "Nutrient Leaching Loss of Pre-Treated Struvite and Its Application in Sudan Grass Cultivation as an Eco-Friendly and Sustainable Fertilizer Source." Sustainability 11, no. 15 (August 3, 2019): 4204. http://dx.doi.org/10.3390/su11154204.
Повний текст джерелаDeneault, James R., Jorge Chang, Jay Myung, Daylond Hooper, Andrew Armstrong, Mark Pitt, and Benji Maruyama. "Toward autonomous additive manufacturing: Bayesian optimization on a 3D printer." MRS Bulletin 46, no. 7 (April 19, 2021): 566–75. http://dx.doi.org/10.1557/s43577-021-00051-1.
Повний текст джерелаEssien, U. A., and S. Vaudreuil. "In-situ metal matrix composites development for additive manufacturing: a perspective." Journal of Achievements in Materials and Manufacturing Engineering 111, no. 2 (April 1, 2022): 78–85. http://dx.doi.org/10.5604/01.3001.0015.9997.
Повний текст джерелаPalousek, David, Martin Kocica, Libor Pantelejev, Lenka Klakurkova, Ladislav Celko, Daniel Koutny, and Jozef Kaiser. "SLM process parameters development of Cu-alloy Cu7.2Ni1.8Si1Cr." Rapid Prototyping Journal 25, no. 2 (March 4, 2019): 266–76. http://dx.doi.org/10.1108/rpj-06-2017-0116.
Повний текст джерелаHong, Myoung-Pyo, Jin-Jae Kim, Woo-Sung Kim, Min-Kyu Lee, Ki-Man Bae, Young-Suk Kim, and Ji-Hyun Sung. "Heterogeneous Material Additive Manufacturing for Hot-Stamping Die." Metals 10, no. 9 (September 9, 2020): 1210. http://dx.doi.org/10.3390/met10091210.
Повний текст джерелаFrancis, Vishal, and Prashant K. Jain. "Effect of stage-dependent addition of nanoparticles in additive manufacturing." Journal of Thermoplastic Composite Materials 33, no. 3 (November 27, 2018): 357–76. http://dx.doi.org/10.1177/0892705718805528.
Повний текст джерелаKumar, Parichit, Saksham Malik, Ehsan Toyserkani, and Mir Behrad Khamesee. "Development of an Electromagnetic Micromanipulator Levitation System for Metal Additive Manufacturing Applications." Micromachines 13, no. 4 (April 9, 2022): 585. http://dx.doi.org/10.3390/mi13040585.
Повний текст джерелаSalmi, Mika. "Additive Manufacturing Processes in Medical Applications." Materials 14, no. 1 (January 3, 2021): 191. http://dx.doi.org/10.3390/ma14010191.
Повний текст джерелаKim, Sujin, Byung Shin, Chungmo Yang, Soohyun Jeong, Jung Shim, Min Park, Young Choy, Chan Heo, and Kangwon Lee. "Development of Poly(HEMA-Am) Polymer Hydrogel Filler for Soft Tissue Reconstruction by Facile Polymerization." Polymers 10, no. 7 (July 13, 2018): 772. http://dx.doi.org/10.3390/polym10070772.
Повний текст джерелаKatz-Demyanetz, Alexander, Vladimir V. Popov, Aleksey Kovalevsky, Daniel Safranchik, and Andrey Koptyug. "Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends." Manufacturing Review 6 (2019): 5. http://dx.doi.org/10.1051/mfreview/2019003.
Повний текст джерелаZhang, Ruiying, Fan Jiang, Long Xue, and Junyu Yu. "Review of Additive Manufacturing Techniques for Large-Scale Metal Functionally Graded Materials." Crystals 12, no. 6 (June 17, 2022): 858. http://dx.doi.org/10.3390/cryst12060858.
Повний текст джерелаPires, J. Norberto, Amin S. Azar, Filipe Nogueira, Carlos Ye Zhu, Ricardo Branco, and Trayana Tankova. "The role of robotics in additive manufacturing: review of the AM processes and introduction of an intelligent system." Industrial Robot: the international journal of robotics research and application 49, no. 2 (December 28, 2021): 311–31. http://dx.doi.org/10.1108/ir-06-2021-0110.
Повний текст джерелаŁacicowa, Barbara. "Interaction between some fungi living on cereal seeding material." Acta Mycologica 9, no. 1 (November 21, 2014): 7–10. http://dx.doi.org/10.5586/am.1973.002.
Повний текст джерелаAhn, Jaeseung, Jaehyeok Doh, Samyeon Kim, and Sang-in Park. "Knowledge-Based Design Algorithm for Support Reduction in Material Extrusion Additive Manufacturing." Micromachines 13, no. 10 (October 4, 2022): 1672. http://dx.doi.org/10.3390/mi13101672.
Повний текст джерелаTopcu, Okan, and Yigit Tascioglu. "A Virtual Prototyping System for Additive Manufacturing Process Development." Advanced Materials Research 445 (January 2012): 971–75. http://dx.doi.org/10.4028/www.scientific.net/amr.445.971.
Повний текст джерелаAbdi, Frank, Parviz Yavari, Vasyl Harik, and Cody Godines. "Material Allowable Generation and AM Process Parameters Effect on Porosity." Coatings 10, no. 7 (June 30, 2020): 625. http://dx.doi.org/10.3390/coatings10070625.
Повний текст джерелаKhrushchev, E. G., and A. I. Levchenko. "Historical and legal concept of development of food security: experience of the NEP." Alma mater. Vestnik Vysshey Shkoly, no. 5 (May 2021): 123–27. http://dx.doi.org/10.20339/am.05-21.123.
Повний текст джерелаFujimoto, Kiyo T., Lance A. Hone, Kory D. Manning, Robert D. Seifert, Kurt L. Davis, James N. Milloway, Richard S. Skifton, Yaqiao Wu, Malwina Wilding, and David Estrada. "Additive Manufacturing of Miniaturized Peak Temperature Monitors for In-Pile Applications." Sensors 21, no. 22 (November 19, 2021): 7688. http://dx.doi.org/10.3390/s21227688.
Повний текст джерелаCabrera, Isaac A., Parker J. Hill, Win-Ying Zhao, Trinity C. Pike, Marc A. Meyers, Ramesh R. Rao, and Albert Y. M. Lin. "Prosthetic Sockets: Tensile Behavior of Vacuum Infiltrated Fused Deposition Modeling Sandwich Structure Composites." Prosthesis 4, no. 3 (June 22, 2022): 317–37. http://dx.doi.org/10.3390/prosthesis4030027.
Повний текст джерелаTassa, Oriana, Laura Alleva, and Roberto Sorci. "Powders for Additive Manufacturing: From Design to Certification." Materials Science Forum 1016 (January 2021): 1473–78. http://dx.doi.org/10.4028/www.scientific.net/msf.1016.1473.
Повний текст джерелаWatschke, Hagen, Sebastian Kuschmitz, Julius Heubach, Guido Lehne, and Thomas Vietor. "A Methodical Approach to Support Conceptual Design for Multi-Material Additive Manufacturing." Proceedings of the Design Society: International Conference on Engineering Design 1, no. 1 (July 2019): 659–68. http://dx.doi.org/10.1017/dsi.2019.70.
Повний текст джерелаBuranská, Eva, Ivan Buranský, Ladislav Morovič, and Katarína Líška. "Environment and Safety Impacts of Additive Manufacturing: A Review." Research Papers Faculty of Materials Science and Technology Slovak University of Technology 27, no. 44 (June 1, 2019): 9–20. http://dx.doi.org/10.2478/rput-2019-0001.
Повний текст джерелаKoptyug, Andrey, Mikael Bäckström, Carlos Alberto Botero Vega, Vladimir Popov, and Ekaterina Chudinova. "Developing New Materials for Electron Beam Melting: Experiences and Challenges." Materials Science Forum 941 (December 2018): 2190–95. http://dx.doi.org/10.4028/www.scientific.net/msf.941.2190.
Повний текст джерелаAlfaify, Abdullah, Mustafa Saleh, Fawaz M. Abdullah, and Abdulrahman M. Al-Ahmari. "Design for Additive Manufacturing: A Systematic Review." Sustainability 12, no. 19 (September 25, 2020): 7936. http://dx.doi.org/10.3390/su12197936.
Повний текст джерелаCastellví, A., L. Poudelet, A. Tejo, L. Calvo, R. Uceda, P. Lustig, J. Minguella, et al. "The commissioning of a hybrid multi-material 3D printer." IOP Conference Series: Materials Science and Engineering 1193, no. 1 (October 1, 2021): 012044. http://dx.doi.org/10.1088/1757-899x/1193/1/012044.
Повний текст джерелаTao, Yubo, Qing Yin, and Peng Li. "An Additive Manufacturing Method Using Large-Scale Wood Inspired by Laminated Object Manufacturing and Plywood Technology." Polymers 13, no. 1 (December 31, 2020): 144. http://dx.doi.org/10.3390/polym13010144.
Повний текст джерелаKoptioug, Andrey, Lars Erik Rännar, Mikael Bäckström, and Marie Cronskär. "Additive Manufacturing for Medical and Biomedical Applications: Advances and Challenges." Materials Science Forum 783-786 (May 2014): 1286–91. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.1286.
Повний текст джерелаOlivier, Djamila, Salvador Borros, and Guillermo Reyes. "Application-driven methodology for new additive manufacturing materials development." Rapid Prototyping Journal 20, no. 1 (January 14, 2014): 50–58. http://dx.doi.org/10.1108/rpj-01-2012-0002.
Повний текст джерелаOmiyale, Babatunde Olamide, and Peter Kayode Farayibi. "Additive manufacturing in the oil and gas industries." Analecta Technica Szegedinensia 14, no. 1 (June 8, 2020): 9–18. http://dx.doi.org/10.14232/analecta.2020.1.9-18.
Повний текст джерелаPaterson, Abby Megan, Richard Bibb, R. Ian Campbell, and Guy Bingham. "Comparing additive manufacturing technologies for customised wrist splints." Rapid Prototyping Journal 21, no. 3 (April 20, 2015): 230–43. http://dx.doi.org/10.1108/rpj-10-2013-0099.
Повний текст джерелаLi, Xianfa, Yongjun Shi, and Shuyao Wang. "Investigation of the phase transformation characteristics of Fe-Co elastrocalaric refrigeration alloy." Journal of Physics: Conference Series 2076, no. 1 (November 1, 2021): 012033. http://dx.doi.org/10.1088/1742-6596/2076/1/012033.
Повний текст джерелаRusicka, Magdalena, and Grażyna Lipowczan. "Potentially pathogenic fungi in the material collected by the Specialist Regional Hospital, Łódź." Acta Mycologica 45, no. 2 (December 23, 2013): 197–205. http://dx.doi.org/10.5586/am.2010.025.
Повний текст джерелаOliveira, Carolina, Mariana Maia, and José Costa. "Production of an Office Stapler by Material Extrusion Process, using DfAM as Optimization Strategy." U.Porto Journal of Engineering 9, no. 1 (January 23, 2023): 28–41. http://dx.doi.org/10.24840/2183-6493_009-001_001635.
Повний текст джерелаYao, Xiling, Seung Ki Moon, and Guijun Bi. "Multidisciplinary design optimization to identify additive manufacturing resources in customized product development." Journal of Computational Design and Engineering 4, no. 2 (October 26, 2016): 131–42. http://dx.doi.org/10.1016/j.jcde.2016.10.001.
Повний текст джерелаLi, Hui, Xiaolong Fu, Liping Zhang, Yixiong Zhang, Lu Jiang, and Zhuo Pu. "A Review of the Latest Developments in the Field of Additive Manufacturing Techniques for Nuclear Reactors." Crystals 12, no. 7 (June 28, 2022): 918. http://dx.doi.org/10.3390/cryst12070918.
Повний текст джерелаKeresztes, Zoltan, David Pammer, and Peter Janos Szabo. "EBSD Examination of Argon Ion Bombarded Ti-6Al-4V Samples Produced with DMLS Technology." Periodica Polytechnica Mechanical Engineering 63, no. 3 (May 31, 2019): 195–200. http://dx.doi.org/10.3311/ppme.13821.
Повний текст джерелаShah, Raj, Nikhil Pai, Andreas Rosenkranz, Khosro Shirvani, and Max Marian. "Tribological Behavior of Additively Manufactured Metal Components." Journal of Manufacturing and Materials Processing 6, no. 6 (November 11, 2022): 138. http://dx.doi.org/10.3390/jmmp6060138.
Повний текст джерелаTorres, Jonathan, and Ali P. Gordon. "Mechanics of the small punch test: a review and qualification of additive manufacturing materials." Journal of Materials Science 56, no. 18 (March 17, 2021): 10707–44. http://dx.doi.org/10.1007/s10853-021-05929-8.
Повний текст джерела