Добірка наукової літератури з теми "AM material development"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "AM material development".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "AM material development"
Roberson, David, Corey M. Shemelya, Eric MacDonald, and Ryan Wicker. "Expanding the applicability of FDM-type technologies through materials development." Rapid Prototyping Journal 21, no. 2 (March 16, 2015): 137–43. http://dx.doi.org/10.1108/rpj-12-2014-0165.
Повний текст джерелаKoptioug, Andrey, Lars Erik Rännar, Mikael Bäckström, and Zhi Jian Shen. "New Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)." Materials Science Forum 879 (November 2016): 996–1001. http://dx.doi.org/10.4028/www.scientific.net/msf.879.996.
Повний текст джерелаMohan, Denesh, Zee Khai Teong, Afifah Nabilah Bakir, Mohd Shaiful Sajab, and Hatika Kaco. "Extending Cellulose-Based Polymers Application in Additive Manufacturing Technology: A Review of Recent Approaches." Polymers 12, no. 9 (August 20, 2020): 1876. http://dx.doi.org/10.3390/polym12091876.
Повний текст джерелаGu, Dongdong, Xinyu Shi, Reinhart Poprawe, David L. Bourell, Rossitza Setchi, and Jihong Zhu. "Material-structure-performance integrated laser-metal additive manufacturing." Science 372, no. 6545 (May 27, 2021): eabg1487. http://dx.doi.org/10.1126/science.abg1487.
Повний текст джерелаFu, Wentao, Christoph Haberland, Eva Verena Klapdor, David Rule, and Sebastian Piegert. "Streamlined frameworks for advancing metal based additive manufacturing technologies." Journal of the Global Power and Propulsion Society 2 (January 29, 2018): QJLS4L. http://dx.doi.org/10.22261/jgpps.qjls4l.
Повний текст джерелаRimkus, Arvydas, Mahmoud M. Farh, and Viktor Gribniak. "Continuously Reinforced Polymeric Composite for Additive Manufacturing—Development and Efficiency Analysis." Polymers 14, no. 17 (August 25, 2022): 3471. http://dx.doi.org/10.3390/polym14173471.
Повний текст джерелаArenas, Maria Alejandra Ardila, Dirk Gutkelch, Olaf Kosch, Rüdiger Brühl, Frank Wiekhorst, and Norbert Löwa. "Development of Phantoms for Multimodal Magnetic Resonance Imaging and Magnetic Particle Imaging." Polymers 14, no. 19 (September 20, 2022): 3925. http://dx.doi.org/10.3390/polym14193925.
Повний текст джерелаSchneck, Matthias, Max Horn, Maik Schindler, and Christian Seidel. "Capability of Multi-Material Laser-Based Powder Bed Fusion—Development and Analysis of a Prototype Large Bore Engine Component." Metals 12, no. 1 (December 25, 2021): 44. http://dx.doi.org/10.3390/met12010044.
Повний текст джерелаJunio, Raí Felipe Pereira, Pedro Henrique Poubel Mendonça da Silveira, Lucas de Mendonça Neuba, Sergio Neves Monteiro, and Lucio Fabio Cassiano Nascimento. "Development and Applications of 3D Printing-Processed Auxetic Structures for High-Velocity Impact Protection: A Review." Eng 4, no. 1 (March 8, 2023): 903–40. http://dx.doi.org/10.3390/eng4010054.
Повний текст джерелаWatschke, Hagen, Lennart Waalkes, Christian Schumacher, and Thomas Vietor. "Development of Novel Test Specimens for Characterization of Multi-Material Parts Manufactured by Material Extrusion." Applied Sciences 8, no. 8 (July 25, 2018): 1220. http://dx.doi.org/10.3390/app8081220.
Повний текст джерелаДисертації з теми "AM material development"
Palmer, Andrew. "The Design and Development of an Additive Fabrication Process and Material Selection Tool." Master's thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3635.
Повний текст джерелаM.S.
Department of Industrial Engineering and Management Systems
Engineering and Computer Science
Industrial Engineering MS
Schunemann, Esteban. "Paste deposition modelling : deconstructing the additive manufacturing process : development of novel multi-material tools and techniques for craft practitioners." Thesis, Brunel University, 2015. http://bura.brunel.ac.uk/handle/2438/13803.
Повний текст джерелаGROPPO, RICCARDO. "Sviluppo e Industrializzazione di una macchina LPF e validazione attraverso l'ottimizzazione dei parametri di processo di Ottone CuZn42 e Acciaio Armonico C67." Doctoral thesis, Università degli studi di Modena e Reggio Emilia, 2021. http://hdl.handle.net/11380/1245517.
Повний текст джерелаThe additive manufacturing technologies, from their birth to the first industrial applications, made a big jump in terms of hardware and material development. The continuing research for new markets along with a growing demand have made sure that the costs of such technologies have become more accessible. From the using of polymers to do prototypes to metal powders to do real mechanical parts the concepts are always the same, building the part layer by layer. In terms of money from the eighties to present days the 3D printing process maintain a positive trend with much more increases for the future. In terms of monetary and energy flows during the production of complex parts, the additive manufacturing technologies can have positive increments. Thus the adoption of Additive Manufacturing also simplifies measurement of the manufacturing energy consumption for life cycle inventory assessments. In many traditional supply chains, where reliable estimates of cumulative energy consumption may be unavailable, the adoption of AM allows producers to provide their customers with reliable data on the energy embedded into products or component during the manufacturing stage. It has been shown that selecting the minimum cost configuration in Additive Manufacturing is likely to lead to the secondary effect of minimizing process energy consumption. My PhD thesis will discuss a specific additive manufacturing technology, based on the powder bed fusion process using a LASER as a melting source. The main construction components present in the prototype machine will be analyzed, looking for the main critical issues (filtering and powder recovery system, black powder abatement system, in-chamber gas flow, measurement of load losses in the characteristic sections of the plant, powder collection system, distribution and powder deposition system on the printing plate) and, if these cause a crash or an irregularity in the quality in the printed component, a radical modification or replacement of this component will develop. Once the mechanical stability of the entire machine has been verified, the mechanical properties of the samples obtained with stainless steel X2CrNiMo17-12-2 - AISI316L, CuZn42 brass powder and C67 steel - Tempered steel will be analyzed. The main mechanical properties required for a component built for additive manufacturing are in terms of mechanical strength porosity, density, hardness, ultimate tensile strength, and yield tension. Measurements of the density of the specimen will be carried out by measuring the relative volumetric density by Archimedes method. Subsequently, the quality of surface roughness will be measured through the acquisition of maps by means of an optical microscope and through an image analysis software the average surface roughness will then be measured. The same sample will then be used to measure the average hardness of the material by means of a durometer. To test the ultimate tensile strength and the yield strength, samples with circular section will be produced to which an analog extensometer will be mounted. Data processing software processes the strain -strain curve.
Fenollosa, Artés Felip. "Contribució a l'estudi de la impressió 3D per a la fabricació de models per facilitar l'assaig d'operacions quirúrgiques de tumors." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/667421.
Повний текст джерелаLa presente tesis doctoral se ha centrado en el reto de conseguir, mediante Fabricación Aditiva (FA), modelos para ensayo quirúrgico, bajo la premisa que los equipos para obtenerlos tendrían que ser accesibles al ámbito hospitalario. El objetivo es facilitar la extensión del uso de modelos como herramienta de preparación de operaciones quirúrgicas, transformando la práctica médica actual de la misma manera que, en su momento, lo hicieron tecnologías como las que facilitaron el uso de radiografías. El motivo de utilizar FA, en lugar de tecnologías más tradicionales, es su capacidad de materializar de forma directa los datos digitales obtenidos de la anatomía del paciente mediante sistemas de escaneado tridimensional, haciendo posible la obtención de modelos personalizados. Los resultados se centran en la generación de nuevo conocimiento para conseguir equipamientos de impresión 3D multimateriales accesibles que permitan la obtención de modelos miméticos respecto a los tejidos vivos. Para facilitar la buscada extensión de la tecnología, se ha focalizado en las tecnologías de código abierto como la Fabricación por Hilo Fundido (FFF) y similares basadas en líquidos catalizables. Esta investigación se alinea dentro de la actividad de desarrollo de la FA en el CIM UPC, y en este ámbito concreto con la colaboración con el Hospital Sant Joan de Déu de Barcelona (HSJD). El primer bloque de la tesis incluye la descripción del estado del arte, detallando las tecnologías existentes y su aplicación al entorno médico. Se han establecido por primera vez unas bases de caracterización de los tejidos vivos – principalmente blandos – para dar apoyo a la selección de materiales que los puedan mimetizar en un proceso de FA, a efectos de mejorar la experiencia de ensayo de los cirujanos. El carácter rígido de los materiales mayoritariamente usados en impresión 3D los hace poco útiles para simular tumores y otras referencias anatómicas. De forma sucesiva, se tratan parámetros como la densidad, la viscoelasticidad, la caracterización de materiales blandos en la industria, el estudio del módulo elástico de tejidos blandos y vasos, la dureza de los mismos, y requerimientos como la esterilización de los modelos. El segundo bloque empieza explorando la impresión 3D mediante FFF. Se clasifican las variantes del proceso desde el punto de vista de la multimaterialidad, esencial para hacer modelos de ensayo quirúrgico, diferenciando entre soluciones multiboquilla y de mezcla en el cabezal. Se ha incluido el estudio de materiales (filamentos y líquidos) que serían más útiles para mimetizar tejidos blandos. Se constata como en los líquidos, en comparación con los filamentos, la complejidad del trabajo en procesos de FA es más elevada, y se determinan formas de imprimir materiales muy blandos. Para acabar, se exponen seis casos reales de colaboración con el HJSD, una selección de aquellos en los que el doctorando ha intervenido en los últimos años. El origen se encuentra en la dificultad del abordaje de operaciones de resección de tumores infantiles como el neuroblastoma, y en la iniciativa del Dr. Lucas Krauel. Finalmente, el Bloque 3 desarrolla numerosos conceptos (hasta 8), actividad completada a lo largo de los últimos cinco años con el apoyo de los medios del CIM UPC y de la actividad asociada a trabajos finales de estudios de estudiantes de la UPC, llegándose a materializar equipamientos experimentales para validarlos. La investigación amplia y sistemática al respecto hace que se esté más cerca de disponer de una solución de impresión 3D multimaterial de sobremesa. Se determina que la mejor vía de progreso es la de disponer de una pluralidad de cabezales independientes, a fin de capacitar la impresora 3D para integrar diversos conceptos estudiados, materializándose una posible solución. Para cerrar la tesis, se plantea cómo sería un equipamiento de impresión 3D para modelos de ensayo quirúrgico, a fin de servir de base para futuros desarrollos.
Книги з теми "AM material development"
Michel, Bierlaire. Optimization: Principles and Algorithms. EPFL Press, 2015. http://dx.doi.org/10.55430/6116v1mb.
Повний текст джерелаЧастини книг з теми "AM material development"
Ureña, Julia, J. R. Blasco, Olga Jordá, Mario Martínez, Luis Portolés, Joamin Gonzalez-Gutierrez, and Stephan Schuschnigg. "Development of Material and Processing Parameters for AM." In A Guide to Additive Manufacturing, 231–306. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-05863-9_7.
Повний текст джерелаAbdulrahman, Kamardeen Olajide, Rasheedat Modupe Mahamood, and Esther T. Akinlabi. "Additive Manufacturing (AM)." In Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials, 27–48. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-7864-3.ch002.
Повний текст джерелаPusateri, Valentina, Constantinos Goulas, and Stig Irving Olsen. "Technical Challenges and Future Environmentally Sustainable Applications for Multi-Material Additive Manufacturing for Metals." In Advances in 3D Printing [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.109788.
Повний текст джерелаNomura, Naoyuki, and Weiwei Zhou. "Development of Alloy Powders for Biomedical Additive Manufacturing." In Additive Manufacturing in Biomedical Applications, 160–63. ASM International, 2022. http://dx.doi.org/10.31399/asm.hb.v23a.a0006907.
Повний текст джерелаBerg, Christopher. "What Next?" In The Classical Guitar Companion, 213–14. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190051105.003.0011.
Повний текст джерелаRandermann, Marcel, Timo Hinrichs, and Roland Jochem. "Development of a Quality Gate Reference Model for FDM Processes." In Quality Control [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.104176.
Повний текст джерелаIsanaka, Sriram Praneeth, Sreekar Karnati, and Frank Liou. "Additive Manufacturing of Aluminum Alloys." In Encyclopedia of Aluminum and Its Alloys. Boca Raton: CRC Press, 2019. http://dx.doi.org/10.1201/9781351045636-140000290.
Повний текст джерелаHang Bob Yung, Ching, Lung Fung Tse, Wing Fung Edmond Yau, and Sze Yi Mak. "Additive Manufacturing in Customized Medical Device." In Advanced Additive Manufacturing [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.101139.
Повний текст джерелаDong, Guoying, Yunlong Tang, and Yaoyao Fiona Zhao. "Mesoscale Lattice Structure Design and Simulation with the Support of a Property Database." In Advances in Computers and Information in Engineering Research, Volume 2, 247–73. ASME, 2021. http://dx.doi.org/10.1115/1.862025_ch8.
Повний текст джерелаde Agustín, Jose María. "Smart Splint Development." In Technological Adoption and Trends in Health Sciences Teaching, Learning, and Practice, 94–125. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-8871-0.ch005.
Повний текст джерелаТези доповідей конференцій з теми "AM material development"
Kemerling, Brandon, and Daniel Ryan. "Development of Production Eddy Current Inspection Process for Additively Manufactured Industrial Gas Turbine Engine Components." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-90971.
Повний текст джерелаKim, Jung Sub, Young Chang Kim, Sang Won Lee, Jeonghan Ko, and Haseung Chung. "Development of a New Laser-Assisted Additive Manufacturing Technology for Hybrid Functionally Graded Material Composites." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-3048.
Повний текст джерелаChen, Wei, Alexandre Cachinhasky, Chad Yates, Mikhail Anisimov, John Speights, James Overstreet, and Aaron Avagliano. "A Case Study for Graded Material Development." In Offshore Technology Conference. OTC, 2021. http://dx.doi.org/10.4043/31065-ms.
Повний текст джерелаChadha, Charul, Gabriel Olaivar, Albert E. Patterson, and Iwona M. Jasiuk. "Design for Multi-Material Manufacturing Using Polyjet Printing Process: A Review." In ASME 2022 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/detc2022-91187.
Повний текст джерелаTam, Walter, Kamil Wlodarczyk, and Joseph Hudak. "Additive Manufactured Pressure Vessel Development: An Update." In ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-94033.
Повний текст джерелаYamada, Takeshi. "Latest Development of Soluble-OLED Material and its Application to Mid- to large-sized Panel Production." In 2019 26th International Workshop on Active-Matrix Flatpanel Displays and Devices (AM-FPD). IEEE, 2019. http://dx.doi.org/10.23919/am-fpd.2019.8830610.
Повний текст джерелаJoyee, Erina Baynojir, and Yayue Pan. "Investigation of a Magnetic-Field-Assisted Stereolithography Process for Printing Functional Part With Graded Materials." In 2020 International Symposium on Flexible Automation. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/isfa2020-9650.
Повний текст джерелаLu, Yan, Paul Witherell, Felipe Lopez, and Ibrahim Assouroko. "Digital Solutions for Integrated and Collaborative Additive Manufacturing." In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-60392.
Повний текст джерелаBen Amor, Sabrine, Floriane Zongo, Borhen Louhichi, Antoine Tahan, and Vladimir Brailovski. "Dimensional Deviation Prediction Model Based on Scale and Material Concentration Effects for LPBF Process." In 2022 International Additive Manufacturing Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/iam2022-93969.
Повний текст джерелаLu, Yan, Zhuo Yang, Douglas Eddy, and Sundar Krishnamurty. "Self-Improving Additive Manufacturing Knowledge Management." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-85996.
Повний текст джерелаЗвіти організацій з теми "AM material development"
MURPH, SIMONA. MATERIAL DEVELOPMENTS FOR 3D/4D ADDITIVE MANUFACTURING (AM) TECHNOLOGIES. Office of Scientific and Technical Information (OSTI), October 2020. http://dx.doi.org/10.2172/1676417.
Повний текст джерелаSESSIONS, HENRY. MATERIAL DEVELOPMENTS FOR 3D/4D ADDITIVE MANUFACTURING (AM) TECHNOLOGIES. Office of Scientific and Technical Information (OSTI), October 2021. http://dx.doi.org/10.2172/1838344.
Повний текст джерелаKennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams, and Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), April 2022. http://dx.doi.org/10.21079/11681/43980.
Повний текст джерелаBernardin, John. E-1 Additive Manufacturing (AM) Existing Infrastructure and Recent Developments in Materials, Processes, and Capabilities. Office of Scientific and Technical Information (OSTI), January 2022. http://dx.doi.org/10.2172/1839346.
Повний текст джерела