Добірка наукової літератури з теми "Aluminum waveguide"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Aluminum waveguide".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Aluminum waveguide"
Alvarado, M. A., M. V. Pelegrini, I. Pereyra, T. A. A. de Assumpção, L. R. P. Kassab, and M. I. Alayo. "Fabrication and characterization of aluminum nitride pedestal-type optical waveguide." Canadian Journal of Physics 92, no. 7/8 (July 2014): 951–54. http://dx.doi.org/10.1139/cjp-2013-0587.
Повний текст джерелаVolkov, S. S., V. M. Nerovnyy, and G. A. Bigus. "The Effect of the Material and the Geometric Shape of the Waveguides on the Process of Ultrasonic Welding of Plastics." Proceedings of Higher Educational Institutions. Маchine Building, no. 10 (715) (October 2019): 25–32. http://dx.doi.org/10.18698/0536-1044-2019-10-25-32.
Повний текст джерелаHasan, M. Arif, Lazaro Calderin, Trevor Lata, Pierre Lucas, Keith Runge, and Pierre A. Deymier. "Directional Elastic Pseudospin and Nonseparability of Directional and Spatial Degrees of Freedom in Parallel Arrays of Coupled Waveguides." Applied Sciences 10, no. 9 (May 4, 2020): 3202. http://dx.doi.org/10.3390/app10093202.
Повний текст джерелаMarayev, Vyacheslav. "Verification of the mathematical model of the induction soldering technological process." Modern Innovations, Systems and Technologies 2, no. 1 (March 30, 2022): 41–50. http://dx.doi.org/10.47813/2782-2818-2022-2-1-41-50.
Повний текст джерелаНовиков, И. И., И. А. Няпшаев, А. Г. Гладышев, В. В. Андрюшкин, А. В. Бабичев, Л. Я. Карачинский, Ю. М. Шерняков та ін. "Влияние состава волноводного слоя на излучательные параметры лазерных гетероструктур InGaAlAs/InP спектрального диапазона 1550 нм". Физика и техника полупроводников 56, № 9 (2022): 933. http://dx.doi.org/10.21883/ftp.2022.09.53418.9892.
Повний текст джерелаElchiev, Javlon D., Muzaffar M. Djalalov, and Aleksandr A. Simonov. "The Use of Vacuum Deposition for Fabrication of Optical Amplifying Mediums and Fiber Optic Modules." Key Engineering Materials 500 (January 2012): 90–93. http://dx.doi.org/10.4028/www.scientific.net/kem.500.90.
Повний текст джерелаTynchenko, Vadim, Sergei Kurashkin, Valeriya Tynchenko, Vladimir Bukhtoyarov, Vladislav Kukartsev, Roman Sergienko, Viktor Kukartsev, and Kirill Bashmur. "Mathematical Modeling of Induction Heating of Waveguide Path Assemblies during Induction Soldering." Metals 11, no. 5 (April 24, 2021): 697. http://dx.doi.org/10.3390/met11050697.
Повний текст джерелаNovikovI.I., Nyapshaev I.A., Gladyshev A. G., Andryushkin V. V., Babichev A. V., Karachinsky L. Ya., Shernyakov Yu. M., et al. "The influence of the waveguide layer composition on the emission parameters of 1550 nm InGaAs/InP laser heterostructures." Semiconductors 56, no. 9 (2022): 712. http://dx.doi.org/10.21883/sc.2022.09.54140.9892.
Повний текст джерелаKrajewski, A., W. Włosiński, T. Chmielewski, and P. Kołodziejczak. "Ultrasonic-vibration assisted arc-welding of aluminum alloys." Bulletin of the Polish Academy of Sciences: Technical Sciences 60, no. 4 (December 1, 2012): 841–52. http://dx.doi.org/10.2478/v10175-012-0098-2.
Повний текст джерелаLu, Shijia, Huangpu Han, Yuhao Wu, Linlin Chen, Yujie Ma, Meng Wang, Bingxi Xiang, Guangyue Chai, and Shuangchen Ruan. "Numerical analysis of a single-mode microring resonator on a YAG-on-insulator." Open Physics 19, no. 1 (January 1, 2021): 932–40. http://dx.doi.org/10.1515/phys-2021-0107.
Повний текст джерелаДисертації з теми "Aluminum waveguide"
Santamaria, Hernandez Amilcar. "Aluminum Nitride Waveguides for Potential Soliton Propagation." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1456848023.
Повний текст джерелаHarten, Paul Alexander. "Ultrafast phenomena in gallium arsenide/aluminum gallium arsenide multiple quantum well waveguide structures using a near infrared femtosecond laser system." Diss., The University of Arizona, 1992. http://hdl.handle.net/10150/185954.
Повний текст джерелаNICOSIA, CARMELO. "Study and design of hollow core wave guide for LASER beam propagation." Doctoral thesis, Politecnico di Torino, 2021. http://hdl.handle.net/11583/2872351.
Повний текст джерелаSamudrala, Pavan Kumar. "Alumina waveguide characterization and SPARROW biosensor modeling." Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4841.
Повний текст джерелаTitle from document title page. Document formatted into pages; contains vii, 85 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 70-72).
O'Hara, Anthony. "Transmission characteristics of small bore hollow alumina waveguides, rigid and flexible, at 10.6μm". Thesis, Heriot-Watt University, 1990. http://hdl.handle.net/10399/276.
Повний текст джерелаLoStracco, Gregory 1960. "Furance and carbon dioxide laser densification of sol-gel derived silicon oxide-titanium oxide-aluminum oxide planar optical waveguides." Thesis, The University of Arizona, 1994. http://hdl.handle.net/10150/291388.
Повний текст джерелаAlvarado, Maria Elisia Armas. "Produção e caracterização de filmes de nitreto de alumínio e sua aplicação em guias de onda tipo pedestal." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/3/3140/tde-12072017-085316/.
Повний текст джерелаThe main objective of this work is the production and study of Aluminum Nitride (AlN) films deposited by reactive sputtering and the fabrication and characterization of pedestal optical waveguides using AlN as core. Initially, aluminum nitride films were produced by reactive sputtering using a 99.999% aluminum (Al) purity target, and nitrogen (N2) as the reactive gas. Subsequently, the films were characterized by ellipsometry, X-ray Diffraction, Fourier Transform Infrared Spectroscopy (FTIR) and Ultraviolet-visible spectroscopy (UV-VIS). Once the best optical and physical conditions for the deposition of AlN films were obtained, pedestal waveguides using these films as a nucleus were fabricated in this work. The pedestal waveguide provides an alternative manufacturing process where the geometry of the waveguide is determined in the pre-core layer, so it is no longer necessary to delineate the side walls of the core layer thereby facilitating the device fabrication process. The pedestal waveguides fabricated in this work were defined by the partial corrosion of SiO2 by the RIE (Reactive Ion Etching) technique using CHF3 and O2 gases as reactive gases. Once the pedestal is completed, an aluminum nitride film is deposited onto the SiO2 layer as the waveguide core. The air was used as an upper cladding, whose refractive index (n ? 1) increases the confinement of the light in the core and also allows the optical loss characterization. For this characterization, we used the superior view technique that allowed the analysis of optical propagation losses for different pedestal heights and different core thicknesses for both highly (002) oriented and amorphous AlN films.
Lafleur, Gaël. "Nouvelles architectures de composants photoniques par l'ingénierie du confinement électrique et optique." Thesis, Toulouse 3, 2016. http://www.theses.fr/2016TOU30263/document.
Повний текст джерелаOptical and electrical confinement using Al(Ga)As layer oxidation is a key milestone in the fabrication of active and passive GaAs-based photonic components. To optimize those devices, through the control of the optical and electrical confinements, a better modelling of oxidation process and a better understanding of optical properties of aluminum oxide (AlOx) is required. One part of this work is focusing on a throughout experimental study of AlGaAs oxidation kinetics, where I studied different important parameters such as wafer temperature, gallium composition, atmospheric pressure and mesa geometry. Then, I developed a new predictive model taking into account the process anisotropy, thus allowing a better temporal and spatial of AlAs oxidation front evolution. Finally, I could exploit this technological process to realize whispering gallery mode microdisks as well as slot optical waveguides, and I have characterized this latter photonic devices
PELENC, DENIS. "Elaboration par epitaxie en phase liquide et caracterisation de couches monocristallines de yag dope : realisation de lasers guide d'onde neodyme et ytterbium a faibles seuils." Grenoble 1, 1993. http://www.theses.fr/1993GRE10171.
Повний текст джерелаIyer, Rajiv. "Planar Lightwave Circuits Employing Coupled Waveguides in Aluminum Gallium Arsenide." Thesis, 2008. http://hdl.handle.net/1807/11213.
Повний текст джерелаКниги з теми "Aluminum waveguide"
C, Papen G., and United States. National Aeronautics and Space Administration., eds. Development of advanced laser diode sources: Final report, NASA NAG 1-1861. [Washington, DC: National Aeronautics and Space Administration, 1998.
Знайти повний текст джерелаC, Papen G., and United States. National Aeronautics and Space Administration., eds. Development of advanced laser diode sources: Final report, NASA NAG 1-1861. [Washington, DC: National Aeronautics and Space Administration, 1998.
Знайти повний текст джерелаWagner, Sean J. The nonlinear optical properties of gallium arsenide/aluminum arsenide superlattice-core waveguides at telecommunications wavelengths. 2006.
Знайти повний текст джерелаЧастини книг з теми "Aluminum waveguide"
Milov, A. V., V. S. Tynchenko, and A. V. Murygin. "Experimental Verification of Flux Effect on Process of Aluminium Waveguide Paths Induction Soldering." In Lecture Notes in Electrical Engineering, 282–91. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-39225-3_31.
Повний текст джерелаSaris, Nur Najahatul Huda, Azura Hamzah, Sumiaty Ambran, Osamu Mikami, Takaaki Ishigure, and Toshimi Fukui. "Optical Amplification in Multiple Cores of Europium Aluminium Composite Incorporated Polymer-Based Optical Waveguide Amplifier by Using Mosquito Method." In Lecture Notes in Electrical Engineering, 25–34. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-1289-6_3.
Повний текст джерелаТези доповідей конференцій з теми "Aluminum waveguide"
Wang, Wei-Jian, Seppo Honkanen, S. Iraj Najafi, and Ari Tervonen. "Comparison of Losses in Glass Waveguides Made by Different Ion-Exchange Processes." In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1993. http://dx.doi.org/10.1364/oam.1993.fq.2.
Повний текст джерелаSingh, Neetesh, Bruno L. Segat Frare, Jonathan D. B. Bradley, and Franz X. Kärtner. "Large mode area waveguide for silicon photonics and modelocked lasers." In CLEO: Applications and Technology. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/cleo_at.2022.jth3a.56.
Повний текст джерелаZhang, Xiangchao, Shaonan Zheng, Qize Zhong, Lianxi Jia, Zhengji Xu, Yuan Dong, Ting Hu, and Yuandong Gu. "Aluminum scandium nitride waveguide in the near-infrared." In 13th International Photonics and OptoElectronics Meetings (POEM 2021), edited by Xinliang Zhang, Perry Shum, and Jianji Dong. SPIE, 2022. http://dx.doi.org/10.1117/12.2626712.
Повний текст джерелаHollenbeck, Michael, Karl Wamick, Clinton Cathey, Janos Opra, and Robert Smith. "Selective Laser Melting aluminum waveguide attenuation at K-band." In 2017 IEEE/MTT-S International Microwave Symposium - IMS 2017. IEEE, 2017. http://dx.doi.org/10.1109/mwsym.2017.8058605.
Повний текст джерелаSharma, Avinash, Carl Carpenter, and Justin Dennison. "Surface roughness effects on additively manufactured aluminum Ka-band waveguide." In 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting. IEEE, 2020. http://dx.doi.org/10.1109/ieeeconf35879.2020.9329866.
Повний текст джерелаTang, Xiao, Yifang Yuan, Kobchat Wongchotigul, and Michael G. Spencer. "Optical waveguide formed by aluminum nitride thin film on sapphire." In Photonics China '96, edited by Chung-Sheng Li, Robert L. Stevenson, and LiWei Zhou. SPIE, 1996. http://dx.doi.org/10.1117/12.253402.
Повний текст джерелаYuan, Yifang, Qiyang Zhu, Baoxue Chen, Changsong Fu, and Ping Li. "Thermo-optic dispersion properties of aluminum nitride with an optical waveguide technique." In Asia-Pacific Optical and Wireless Communications 2002, edited by Shuisheng Jian, Steven Shen, and Katsunari Okamoto. SPIE, 2002. http://dx.doi.org/10.1117/12.481263.
Повний текст джерелаHickstein, Daniel D., Hojoong Jung, David R. Carlson, Alex Lind, Ian Coddington, Kartik Srinivasan, Gabriel Ycas, et al. "Aluminum-nitride-waveguide supercontinuum and harmonic generation across 500 to 4000 nm." In CLEO: QELS_Fundamental Science. Washington, D.C.: OSA, 2017. http://dx.doi.org/10.1364/cleo_qels.2017.ftu1d.4.
Повний текст джерелаHuda Saris, Nur Najahatul, Nur Ameelia Abdul Kadir, Azura Hamzah, Sumiaty Ambran, Osamu Mikami, Toshifumi Horie, and Takaaki Ishigure. "Integrated Optics Europium Aluminum Polymer Optical Waveguide with Graded Index Circular Core." In 2020 IEEE 8th International Conference on Photonics (ICP). IEEE, 2020. http://dx.doi.org/10.1109/icp46580.2020.9206465.
Повний текст джерелаTombrello, Joseph F., Ramarao Inguva, and C. M. Bowden. "Nonlinear Effects of Quantum Confinement Composite Materials in Planar Waveguide Structures." In Nonlinear Optical Properties of Materials. Washington, D.C.: Optica Publishing Group, 1988. http://dx.doi.org/10.1364/nlopm.1988.mf14.
Повний текст джерела