Добірка наукової літератури з теми "Alpha brasses"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Alpha brasses".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Alpha brasses":
Ghauri, I. M., M. Z. Butt, and S. M. Raza. "Grain growth in copper and alpha-brasses." Journal of Materials Science 25, no. 11 (November 1990): 4782–84. http://dx.doi.org/10.1007/bf01129942.
Loginov, Yu N., and A. S. Ovchinnikov. "Increase in the Uniformity of Structure and Properties of Extruded Workpieces of Alpha + Beta Lead Brasses." Metallurgist 59, no. 3-4 (July 2015): 342–47. http://dx.doi.org/10.1007/s11015-015-0107-4.
Kunčická, Lenka, Michal Jambor, Adam Weiser, and Jiří Dvořák. "Structural Factors Inducing Cracking of Brass Fittings." Materials 14, no. 12 (June 12, 2021): 3255. http://dx.doi.org/10.3390/ma14123255.
Quelle, F. W., K. Shimoda, W. Thierfelder, C. Fischer, A. Kim, S. M. Ruben, J. L. Cleveland, J. H. Pierce, A. D. Keegan, and K. Nelms. "Cloning of murine Stat6 and human Stat6, Stat proteins that are tyrosine phosphorylated in responses to IL-4 and IL-3 but are not required for mitogenesis." Molecular and Cellular Biology 15, no. 6 (June 1995): 3336–43. http://dx.doi.org/10.1128/mcb.15.6.3336.
Дисертації з теми "Alpha brasses":
Ezequiel, Alvarado Marco Alejandro. "Mécanismes de fragilisation d'alliages Cu-Zn par l'eutectique Ga-In." Electronic Thesis or Diss., Université de Lille (2022-....), 2023. http://www.theses.fr/2023ULILR005.
This work presents a study of the liquid metal embrittlement (LME) phenomenon at room temperature on alpha brasses with different Zn content in contact with the liquid eutectic Ga-In (EGaIn). The liquid EGaIn wets pure Cu partially with a relatively low contact angle of 49 ± 5 °, which is lower for the alpha brasses and decreases with the Zn content alloy down to 36 ± 5 ° for the Cu-30%Zn alloy. Moreover, the CuGa2 intermetallic forms whenever the liquid EGaIn is in contact with Cu and the alpha brasses, independently of the Zn content. Testing with the 3-point bending test showed that the LME sensitivity by the EGaIn increases at higher strain rates, higher Zn content, and higher hardness. Whenever there is LME, the liquid EGaIn does not affect the fracture initiation but the fracture propagation; hence the samples systematically presented a ductile fracture initiation followed by a brittle intergranular fracture propagation. The CuGa2 intermetallic impedes the brittle fracture initiation by blocking the contact between the EGaIn and the alpha brasses from the early stages of the test. Later, when the intermetallic breaks, the liquid EGaIn comes into contact with the alpha brass making the LME possible if the brass is under sufficient plastic deformation. Due to the ductile fracture initiation, the Cu-30%Zn alloy does not present LME when tested using the standard Small Punch Test (SPT). In contrast, using pre-notched SPT samples enables the observation of this alloy's embrittlement in contact with the liquid EGaIn. Furthermore, due to the ductile fracture initiation, it is impossible to use the bending tests or the SPT to measure the fracture toughness related to the LME phenomenon. In contrast, in-situ micro-bending tests with a W protective layer were suitable for the fracture toughness measurement of Cu-30%Zn in contact with the EGaIn; for instance, a fracture toughness value of 1.57 ± 0.08 MPa m1/2 was measured with the double clamped beam test
Ren, Ziyuan. "Crack Analysis of Notched Alpha Brass Foil." University of Toledo / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1271438213.
Jones, J. P. "Creep and creep fracture of alpha/beta brass." Thesis, Swansea University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637455.
Chen, Yongjin, and 陳永進. "Effects of rolling conditions on texture and microstructure development in [alpha] brass." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2000. http://hub.hku.hk/bib/B31239997.
Draou, Khaled. "Oxydation de laitons alpha par plasma inductif d'oxygène à basse pression." Rouen, 1997. http://www.theses.fr/1997ROUES026.
Книги з теми "Alpha brasses":
Catalogue de livres rares et précieux, manuscrits et imprimés principalement sur l'Amérique et sur les langues du monde entier: Composant la bibliothèque de M. Alph.-L. Pinart et comprenant en totalité la Bibliothèque Mexico-Guatémalienne de M. l'abbé Brasseur de Bourbourg. Paris: Vve A. Labitte, 1986.
Частини книг з теми "Alpha brasses":
Sugeta, A., Yoshihiko Uematsu, and M. Jono. "A Study on the Mechanism of Small Fatigue Crack Deflection Behavior in Alpha-Brass by Means of In Situ Atomic Force Microscopy and Crystallo-Graphic Orientation Analysis." In Key Engineering Materials, 1225–28. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1225.
Тези доповідей конференцій з теми "Alpha brasses":
Hu, Xianguo. "Emulsion for Single Phase Alpha-Brass in Hot Rolling Process: Case Study." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63133.
Afolabi, Daniyan Ilesanmi, Adeodu Adefemi Omowole, Uchegbu Ikenna, Kanakana-Katumba Mukondeleli Grace, and Maladzhi Rendani Wilson. "Development and mechanical evaluation of alpha brass (Cu-Zn alloy) for industrial applications." In TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES22Fr. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0129248.
Edward, Aghogho Bright, and Christopher Izelu. "Experimental determination of the effects of annealing on the micro-structures and mechanical properties of cold-worked alpha-brass." In 3RD INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS. AIP, 2013. http://dx.doi.org/10.1063/1.4849251.