Книги з теми "Alloys of iron and aluminum"

A, Aksenov A., and Eskin D. G, eds. Iron in aluminum alloys: Impurity and alloying element. London: Taylor & Francis, 2002.

Wysłocki, Jerzy J. Mechanizm koercji magnetycznie twardego anizotropowego stopu Fe-Al-C. Częstochowa: Wydawn. Politechgniki Częstochowskiej, 1996.

International Seminar on Refining and Alloying of Liquid Aluminium on Ferro-Alloys (1985 Trondheim, Norway). Refining and alloying of liquid aluminium and ferro-alloys: Proceedings of the International Seminar of Refining and Alloying of Liquid Aluminium and Ferro-Alloys, the Norwegian Institute of Technology, Trondheim, August 1985. Düsseldorf: Aluminium-Verlag, 1985.

Woodyard, Jack R. Machining of Fe3Al intermetallics. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1992.

Śleboda, Tomasz. Cieplno-mechaniczna przeróbka stopów FeAI: Thermomechanical processing of FeAI alloys. Kraków: Wydawnictwa AGH, 2013.

1950-, Cheng Shu-hong, and Mobley Carroll E. 1941-, eds. A fractography atlas of casting alloys. Columbus, Ohio: Battelle Press, 1992.

Guzik, Edward. Model wzrostu eutektyki nieregularnej na przykładzie eutektyki grafitowej w stopach Fe-C. Kraków: Wydawnictwa AGH, 1994.

International Seminar on Refining and Alloying of Liquid Aluminium and Ferro-Alloys (1985 Norwegian Institute of Technology). Refining and alloying of liquid aluminium and ferro-alloys: Proceedings of the International Seminar on Refining and Alloying of Liquid Aluminium and Ferro-Alloys, the Norwegian Institute of Technology, Trondheim, August 1985. Düsseldorf: Aluminium-Verlag, 1985.

Dunning, J. S. Effect of aluminum additives on sulfidation resistance of some Fe-Cr-Ni alloys. Washington, DC: Dept. of the Interior, 1989.

Schanssema, Marko. Iron-aluminium alloys for fossil fuel combustion systems. Birmingham: University of Birmingham, 1996.

C, Deevi Seetharama, ASM International. Materials Science Critical Technologies., and ASM International. Specialty Materials Critical Technologies Sector., eds. International Symposium on Nickel and Iron Aluminides: Processing, Properties, and Applications: Proceedings from Materials Week '96, 7-9 October 1996, Cincinnati Convention Center, Cincinnati, Ohio. Materials Park, OH: ASM International, 1997.

Dunning, J. S. Effects of Al additions on sulfidation resistance of some Fe-Cr-Ni alloys. Washington, D.C: Bureau of Mines, U.S. Dept. of the Interior, 1989.

Materials Research Society. Meeting Symposium U., ed. Advanced intermetallic-based alloys for extreme environment and energy applications: Symposium held December 1-4, 2008, Boston, Massachusetts, U.S.A. Warrendale, Pa: Materials Research Society, 2009.

Polzin, Ralf. Beitrag zur Klärung der Vorgänge beim laserunterstützten Walzplattieren. Freiberg: Technische Universität Bergakademie, 2005.

Nyichomba, Blasius Bavo. The dimensional accuracy of sand castings (commercial aluminium alloys and grey cast iron). Birmingham: University of Birmingham, 1990.

Jones, S. J. The influence of homogenisation treatment and manganese content on the aluminium-iron-silicon intermetallics in 6063 aluminium alloys. Manchester: UMIST, 1994.

International Workshop on Effect of Iron and Silicon in Aluminium and its Alloys (1989 Balatonfured, Hungary). Effect of iron and silicon in aluminium and its alloys: Proceedings of the International Workshop, held in Balatonfured, Hungary, May 1989. Zurich, Switzerland: Trans Tech Publications, 1990.

Elfadhli, Abd Elhafid Ibrahim. The effect of yttrium on the spallation of oxide scales formed on iron-chromium aluminium alloys at elevated temperatures. Manchester: UMIST, 1998.

Hiramatsu, N. The effects of alloying elements on the oxidation of thin foils of iron-chromium-aluminium alloys at high temperatures. Manchester: UMIST, 1996.

A, Belov N., and Glazoff Michael V, eds. Casting aluminum alloys. Amsterdam: Elsevier Science, 2007.

Grushko, Olga, Boris Ovsyannikov, and Viktor Ovchinnokov. Aluminum-Lithium Alloys. Boca Raton : Taylor & Francis, CRC Press, 2017. | Series:: CRC Press, 2016. http://dx.doi.org/10.1201/9781315369525.

Deniszczyk, Józef. Struktura elektronowa, właściwości magnetyczne i parametry struktury nadsubtelnej wybranych międzymetalicznych związków żelaza o strukturze typu B2, DO3 i L21. Katowice: Wydawnictwo Uniwersytetu Śląskiego, 2005.

Kiefer, Max. Arkansas Aluminum Alloys, Inc. [Atlanta, Ga.?]: U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 1995.

Kiefer, Max. Arkansas Aluminum Alloys, Inc. [Atlanta, Ga.?]: U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 1995.

Kiefer, Max. Arkansas Aluminum Alloys, Inc. [Atlanta, Ga.?]: U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 1995.

King, Frank. Aluminium and its alloys. Chichester [West Sussex]: Ellis Horwood, 1987.

Sheppard, T. Extrusion of aluminium alloys. Dordrecht: Kluwer Academic Publishers, 1999.

Muster, T. H. Copper distributions in aluminum alloys. New York: Nova Science Publishers, 2008.

Fine, ME, and EA Starke, eds. Rapidly Solidified Powder Aluminum Alloys. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1986. http://dx.doi.org/10.1520/stp890-eb.

Piascik, Robert S. Environmental fatigue in aluminum-lithium alloys. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Persson, Erik L. Aluminum alloys: Preparation, properties, and applications. Hauppauge, N.Y: Nova Science, 2010.

Nafisi, Shahrooz, and Reza Ghomashchi. Semi-Solid Processing of Aluminum Alloys. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-40335-9.

Aluminum alloys: Preparation, properties, and applications. Hauppauge, N.Y: Nova Science, 2010.

Symposium on "Dispersion Strengthened Aluminum Alloys" (6th 1988 Phoenix, Ariz.). Dispersion strengthened aluminum alloys: Proceedings of the six-session Symposium on "Dispersion Strengthened Aluminum Alloys". Warrendale, Pa: TMS, 1988.

Schütze, Michael. Corrosion resistance of aluminium and aluminium alloys: Corrosive agents and their interaction with aluminium and ist [i.e. its] alloys. Frankfurt (Main), Germany: [Wiley-VCH for] DECHEMA, 2010.

Aluminum alloy structures. 2nd ed. London: E & FN Spon, 1995.

Belov, N. A., D. G. Eskin, and A. A. Aksenov. Iron in Aluminium Alloys: Impurity and Alloying Element (Advances in Metallic Alloys). CRC, 2002.

Processing, properties, and applications of iron aluminides: Proceedings of a symposium sponsored by the ASM/MSD Flow and Fracture Committee, the SMD Physical Metallurgy Committeee and the TMS-SMD/ASM-MSD Corrosion and Environmental Effects Committee held at the Annual Meeting of the Minerals, Metals & Materials Society in San Francisco, California, February 27-March 3, 1994. Warrendale, Pa: TMS, 1994.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., ed. Effects of chromium and aluminum on mechanical and oxidation properties of iron-nickel-base superalloys based on CG-27. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

DeVan, J. H. Sulfidatiion/oxidation properties of iron-based alloys containing niobium and aluminum. 1989.

Refining and alloying of liquid aluminium and ferro-alloys: Proceedings of the International Seminar on Refining and Alloying of Liquid Aluminium and Ferro-Alloys, ... of Technology, Trondheim, August 1985. Aluminium-Verlag, 1985.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., ed. Thermodynamic analysis of compatibility of several reinforcement materials with FeAl alloys. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Advances in Lightweight Automotive Castings and Wrought Aluminum Alloys (Sae International). Society of Automotive Engineers Inc, 2004.

United States. Bureau of Mines, ed. Machining of Feb3sAl intermetallics. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1992.

Center, Langley Research, ed. NASA-UVa light aerospace alloy and structures technology program supplement: Aluminum-based materials for high speed aircraft : semi-annual report July 1, 1992 - December 31, 1992. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Center, Langley Research, ed. NASA-UVa light aerospace alloy and structures technology program supplement: Aluminum-based materials for high speed aircraft : semi-annual report July 1, 1992 - December 31, 1992. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Center, Langley Research, ed. NASA-UVa light aerospace alloy and structures technology program supplement: Aluminum-based materials for high speed aircraft : semi-annual report July 1, 1992 - December 31, 1992. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

The Electrodeposition of Cobalt, Iron, and Antimony and their Aluminum Alloys from Room-Temperature Aluminum Chloride 1-Methyl-3-Ethylimidazolium Chloride Molten Salt. Storming Media, 1997.

Kovacs, Istvan, and INTERNATIONAL WORKSHOP ON EFFECT OF IRON. Effect of Iron and Silicon in Aluminum and Its Alloys: Proceedings of the International Workshop Held in Balatonfured, Hungary, May, 1989 (Key Eningeering Materials,). Trans Tech Publications, 1990.

Aluminum Alloys. MDPI, 2018. http://dx.doi.org/10.3390/books978-3-03842-475-8.