Статті в журналах з теми "Alloy composites"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Alloy composites".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Avinash, L., T. Ramprabhu, Adithya Parthasarathy, K. N. Varun Kumar, and Basavaraj Sajjan. "Wear and Mechanical Behaviour of Hypo-Eutectic Al-7%Si-0.5%Mg Alloy (A357) Reinforced with Al2O3 Particles." Applied Mechanics and Materials 829 (March 2016): 66–72. http://dx.doi.org/10.4028/www.scientific.net/amm.829.66.
Повний текст джерелаJung, Beom-Seok, Jung-Pyo Kong, NingXue Li, Yoon-Mi Kim, Min-Saeng Kim, Sung-Hoon Ahn, and Maenghyo Cho. "Numerical simulation and verification of a curved morphing composite structure with embedded shape memory alloy wire actuators." Journal of Intelligent Material Systems and Structures 24, no. 1 (September 21, 2012): 89–98. http://dx.doi.org/10.1177/1045389x12459588.
Повний текст джерелаWilk, M. S., and R. E. Śliwa. "The Influence of Features of Aluminium Alloys 2024, 6061 and 7075 on the Properties of Glare-Type Composites / Wpływ Właściwości Stopów Aluminium 2024, 6061, 7075 Na Cechy Kompozytu Typu Glare." Archives of Metallurgy and Materials 60, no. 4 (December 1, 2015): 3101–8. http://dx.doi.org/10.1515/amm-2015-0496.
Повний текст джерелаAishwarya, J., M. Nithin Kumaar, Vaira Vignesh Ramalingam, and M. Govindaraju. "Sandwich composite of aluminum alloy and magnesium alloy through accumulative roll bonding technique." Metallurgical and Materials Engineering 28, no. 2 (June 30, 2022): 257–68. http://dx.doi.org/10.30544/761.
Повний текст джерелаHembrom, S., B. N. Roy, N. Khobragade, and D. Roy. "Studies on Amorphous Alloy Dispersed Aluminium Matrix Composite Prepared by High Pressure Torsion." Journal of Materials Science Research 5, no. 1 (December 29, 2015): 89. http://dx.doi.org/10.5539/jmsr.v5n1p89.
Повний текст джерелаVignoli, Lucas L., Marcelo A. Savi, and Sami El-Borgi. "Nonlinear dynamics of earthquake-resistant structures using shape memory alloy composites." Journal of Intelligent Material Systems and Structures 31, no. 5 (January 13, 2020): 771–87. http://dx.doi.org/10.1177/1045389x19898269.
Повний текст джерелаAvinash, L., Hemanth Kumar, Adithya Parthasarathy, K. N. Varun Kumar, and Basavaraj Sajjan. "The Effect of Ceramic Reinforcement on the Microstructure, Mechanical Properties and Tribological Behavior of Al-7.5%Si-0.5%Mg Alloy." Applied Mechanics and Materials 867 (July 2017): 3–9. http://dx.doi.org/10.4028/www.scientific.net/amm.867.3.
Повний текст джерелаRajaram, G., S. Kumaran, and T. Srinivas Rao. "Tensile Behaviour of Al-Si Alloy and Al-Si/Graphite Composites at Elevated Temperatures." Materials Science Forum 710 (January 2012): 457–62. http://dx.doi.org/10.4028/www.scientific.net/msf.710.457.
Повний текст джерелаPark, Won Jo, Hae Young Jung, Sun Chul Huh, Han Ki Yoon, and Kang Kil Lee. "The Strength and Hardness of Metal Matrix Composites by Binder Additives." Key Engineering Materials 297-300 (November 2005): 489–94. http://dx.doi.org/10.4028/www.scientific.net/kem.297-300.489.
Повний текст джерелаLiu, Bingfei, Qingfei Wang, Shilong Hu, Wei Zhang, and Chunzhi Du. "On thermomechanical behaviors of the functional graded shape memory alloy composite for jet engine chevron." Journal of Intelligent Material Systems and Structures 29, no. 14 (June 13, 2018): 2986–3005. http://dx.doi.org/10.1177/1045389x18781257.
Повний текст джерелаHigginson, R. L., H. Chang, and Jon Binner. "Microstructures of Alumina-Aluminium/Magnesium Interpenetrating Composites." Materials Science Forum 519-521 (July 2006): 1279–84. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.1279.
Повний текст джерелаChoi, Yong Bum, Jae Woong Jung, Won Jo Park, Sun Chul Huh, Kwang Yong Lee, Han Ki Yoon та Gen Sasaki. "Effects on Inorganic Binder to Improve Strength and Hardness of α+ Al18B4O33w/AC4CH Alloy Composites". Key Engineering Materials 261-263 (квітень 2004): 1451–56. http://dx.doi.org/10.4028/www.scientific.net/kem.261-263.1451.
Повний текст джерелаNoda, Masafumi, and Kunio Funami. "Strength and Formability of Fine-Grained Laminated Magnesium Alloy." Materials Science Forum 753 (March 2013): 465–68. http://dx.doi.org/10.4028/www.scientific.net/msf.753.465.
Повний текст джерелаLi, He, Li Hua Chai, Zi Yong Chen, Hai Jing Wang, and Tou Nan Jin. "Effect of TiB2 Content on Microstructure and Hardness of In Situ TiB2 Reinforced High Zinc Content Al-Zn-Mg-Cu-Zr Composite Materials." Materials Science Forum 894 (March 2017): 34–37. http://dx.doi.org/10.4028/www.scientific.net/msf.894.34.
Повний текст джерелаYadav, Govind, R. S. Rana, R. K. Dwivedi, and Ankur Tiwari. "Development and Analysis of Automotive Component Using Aluminium Alloy Nano Silicon Carbide Composite." Applied Mechanics and Materials 813-814 (November 2015): 257–62. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.257.
Повний текст джерелаJanot, R., L. Aymard, A. Rougier, G. A. Nazri, and J. M. Tarascon. "Enhanced hydrogen sorption capacities and kinetics of Mg2Ni alloys by ball-milling with carbon and Pd coating." Journal of Materials Research 18, no. 8 (August 2003): 1749–52. http://dx.doi.org/10.1557/jmr.2003.0241.
Повний текст джерелаSankaravadivel, P., N. Babu, M. Samuel Gemsprim, and N. Natarajan. "Wear Characteristics of Phosphor-Bronze/Boron Carbide Particulate Composites." Applied Mechanics and Materials 550 (May 2014): 48–52. http://dx.doi.org/10.4028/www.scientific.net/amm.550.48.
Повний текст джерелаChen, Liang-Guang, Kung-Hsien Shue, Shou-Yi Chang, and Su-Jien Lin. "Squeeze casting of SiCp/Al-alloy composites with various contents of reinforcements." Journal of Materials Research 17, no. 2 (February 2002): 376–85. http://dx.doi.org/10.1557/jmr.2002.0053.
Повний текст джерелаАборкин, А. В., И. В. Сайков, В. Д. Бербенцев, А. М. Объедков, А. Е. Сычев та М. И. Алымов. "Применение газовой экструзии для синтеза высокопрочного композита на основе алюминиевого сплава серии 5xxx, упрочненного углеродными наноструктурами". Письма в журнал технической физики 46, № 5 (2020): 7. http://dx.doi.org/10.21883/pjtf.2020.05.49099.18109.
Повний текст джерелаEl-Khair, Malak Abou, Fatma Firouz, Ahmed Lotfy, Essam Mohamed, and Atef Daoud. "Microstructure and Wear Behavior of Squeezed Magnesium Alloy (AM100) Based Composites Reinforced with ZrB2, Graphite and Hybrid of ZrB2 and Graphite Particles." Key Engineering Materials 835 (March 2020): 155–62. http://dx.doi.org/10.4028/www.scientific.net/kem.835.155.
Повний текст джерелаVencl, Aleksandar, Ilija Bobic, and Blaza Stojanovic. "Tribological properties of A356 Al-Si alloy composites under dry sliding conditions." Industrial Lubrication and Tribology 66, no. 1 (February 4, 2014): 66–74. http://dx.doi.org/10.1108/ilt-06-2011-0047.
Повний текст джерелаV. A., Gulevskiy. "The Composites materials Type Carbon –Aluminum Alloy." Scientific Bulletin of Naval Academy XXI, no. 2 (December 15, 2018): 8–12. http://dx.doi.org/10.21279/1454-864x-18-i2-001.
Повний текст джерелаXing, Ting Yong, Yan Jun Zheng, and Li Shan Cui. "Internal Friction Behaviors of TiNi Shape Memory Alloy Fiber/Ni Matrix Composite." Materials Science Forum 546-549 (May 2007): 1637–42. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.1637.
Повний текст джерелаGupta, Pankaj K., and MK Gupta. "Mechanical and microstructural analysis of Al-Al2O3/B4C hybrid composites." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234, no. 12 (August 5, 2020): 1503–14. http://dx.doi.org/10.1177/1464420720942554.
Повний текст джерелаHo, C. T. "Carbon fiber-reinforced tin-lead alloy composites." Journal of Materials Research 9, no. 8 (August 1994): 2144–47. http://dx.doi.org/10.1557/jmr.1994.2144.
Повний текст джерелаSeikh, Ziyauddin, Mukandar Sekh, Sandip Kunar, Golam Kibria, Rafiqul Haque, and Shamim Haidar. "Rice Husk Ash Reinforced Aluminium Metal Matrix Composites: A Review." Materials Science Forum 1070 (October 13, 2022): 55–70. http://dx.doi.org/10.4028/p-u8s016.
Повний текст джерелаDasgupta, Rupa, A. K. Jha, and S. Das. "Effect of Addition of Fine SiC Particles on the Dry Sliding Wear Behaviour of Extruded 2014 Al-Alloy." ISRN Tribology 2013 (December 16, 2013): 1–9. http://dx.doi.org/10.5402/2013/648524.
Повний текст джерелаKurita, Hiroki, Katsuyoshi Kondoh, Junko Umeda, and Noriharu Yodoshi. "Tensile Fracture of TiB Whisker Reinforced Ti Alloy Matrix Composites." Materials Science Forum 941 (December 2018): 1961–65. http://dx.doi.org/10.4028/www.scientific.net/msf.941.1961.
Повний текст джерелаHafizudin, Mohammad, Taufik Roni Sahroni, Mohd Razali Muhamad, Nurul Farah, and M. R. Kamal. "Mechanical Properties of Oil Palm Empty Fruit Bunch Fibers-Cast Alloy Composite Using Three Point Bending Test." Applied Mechanics and Materials 761 (May 2015): 374–79. http://dx.doi.org/10.4028/www.scientific.net/amm.761.374.
Повний текст джерелаSwamy, A. R. K., A. Ramesha, J. N. Prakash, and G. B. Veeresh Kumar. "Mechanical and tribological properties of As-cast Al6061-Tungsten carbide metal matrix composites." Material Science Research India 7, no. 2 (February 8, 2010): 355–68. http://dx.doi.org/10.13005/msri/070205.
Повний текст джерелаGarcía-Vázquez, Felipe, Benjamín Vargas-Arista, Rodrigo Muñiz, Juan Carlos Ortiz, Héctor Hernández García, and Jorge Acevedo. "The Role of Friction Stir Processing (FSP) Parameters on TiC Reinforced Surface Al7075-T651 Aluminum Alloy." Soldagem & Inspeção 21, no. 4 (December 2016): 508–16. http://dx.doi.org/10.1590/0104-9224/si2104.10.
Повний текст джерелаSajjan, Basavaraj, L. Avinash, S. Varun, K. N. Varun Kumar, and Adithya Parthasarathy. "Investigation of Mechanical Properties and Dry Sliding Wear Behaviour of Graphite Reinforced Al7068 Alloy." Applied Mechanics and Materials 867 (July 2017): 10–18. http://dx.doi.org/10.4028/www.scientific.net/amm.867.10.
Повний текст джерелаMizumoto, Masayuki, Takeshi Ohgai, and Akio Kagawa. "Novel Separation Technique of Particle Reinforced Metal Matrix Composites by Fused Deposition Method." Materials Science Forum 539-543 (March 2007): 1028–32. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.1028.
Повний текст джерелаRurua, Lamara, Levan Khundadze, and Lili Nadaraia. "Sintering of TiB2-TiC-SiC Composite Materials by Combined SPS/SHS Method." Materials Science Forum 1067 (August 10, 2022): 91–97. http://dx.doi.org/10.4028/p-r40082.
Повний текст джерелаBin Hu, Liming Peng, and Wenjiang Ding. "Dry sliding wear behavior of Saffil fiber-reinforced Mg-10Gd-3Y-0.5Zr magnesium alloy-based composites." Journal of Composite Materials 45, no. 6 (December 7, 2010): 683–93. http://dx.doi.org/10.1177/0021998310377938.
Повний текст джерелаQin, Feng Xiang, Zhen Hua Dan, and Guo Qiang Xie. "Mg-Based Bulk Amorphous Alloy Composites Fabricated by Spark Plasma Sintering." Materials Science Forum 783-786 (May 2014): 1931–36. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.1931.
Повний текст джерелаUmar, MD, R. Muraliraja, V. S. Shaisundaram, and Shiferaw Garoma Wayessa. "Influence of Future Material Nano-ZrO2 and Graphene on the Mechanical Properties of Al Composites." Journal of Nanomaterials 2022 (September 22, 2022): 1–7. http://dx.doi.org/10.1155/2022/1454037.
Повний текст джерелаChen, Xingxing, Ying Li, Ying Wang, Dingquan Song, Zuowan Zhou, and David Hui. "An approach to effectively improve the interfacial bonding of nano-perfused composites by in situ growth of CNTs." Nanotechnology Reviews 10, no. 1 (January 1, 2021): 282–91. http://dx.doi.org/10.1515/ntrev-2021-0025.
Повний текст джерелаSkury, Ana Lúcia Diegues, Marcia G. de Azevedo, Sérgio Neves Monteiro, and Apostolos J. Sideris. "Microstructure and Wear of a Cu-Si-B Alloy and Diamond Composites Obtained in High Pressure and High Temperature Conditions." Materials Science Forum 727-728 (August 2012): 436–39. http://dx.doi.org/10.4028/www.scientific.net/msf.727-728.436.
Повний текст джерелаSenthilkumar, R., N. Arunkumar, and M. Manzoor Hussian. "Effects of Micro and Nano-Size Al2O3 Particle Reinforcement on Mechanical Behaviour of Extruded Aluminum Alloy Matrix Composite." Applied Mechanics and Materials 787 (August 2015): 617–21. http://dx.doi.org/10.4028/www.scientific.net/amm.787.617.
Повний текст джерелаShankar, Karthik Venkitraman, Jan Jezierski, Vaira Vignesh Ramalingam, Devaprasad Padmakumar, Midun Raj Leena, Amal, Gokul Reghunath, and Rakesh Krishnan. "Investigating the Effect of Fly Ash Addition on the Metallurgical and Mechanical Behavior of Al-Si-Mg-Cu Alloy for Engine Cylinder Head Application." Materials 15, no. 15 (August 8, 2022): 5462. http://dx.doi.org/10.3390/ma15155462.
Повний текст джерелаAsano, Kazunori, Hiroyuki Yoneda, and Kenji Higashi. "Machinability of Short Potassium Titanate Fiber Reinforced Aluminum Alloy Composites Fabricated by Squeeze Casting." Advanced Materials Research 856 (December 2013): 36–40. http://dx.doi.org/10.4028/www.scientific.net/amr.856.36.
Повний текст джерелаFaisal, M. H., and S. Prabagaran. "Micro structural and static structural analysis of LM6/B4C and LM6/B4C/GR hybrid aluminium metal matrix composites." International Journal of Engineering & Technology 7, no. 1.1 (December 21, 2017): 37. http://dx.doi.org/10.14419/ijet.v7i1.1.8919.
Повний текст джерелаRiquelme, Ainhoa, María Dolores Escalera-Rodríguez, Pilar Rodrigo, and Joaquin Rams. "Laser Cladding of In Situ Al-AlN Composite on Light Alloys Substrate." Key Engineering Materials 724 (December 2016): 66–70. http://dx.doi.org/10.4028/www.scientific.net/kem.724.66.
Повний текст джерелаŞahin, Y., and K. Emre Öksüz. "The Microstructure and Hardness of Al2O3 Particle Reinforced Composite." Applied Mechanics and Materials 232 (November 2012): 39–44. http://dx.doi.org/10.4028/www.scientific.net/amm.232.39.
Повний текст джерелаSingh, Vibhu, Soni Kesarwani, and M. S. Niranjan. "IMPACT OF VARIATION IN SIZES OF BORON CARBIDE ON PROPERTIES OF NOVEL COMPOSITE OF ALUMINIUM ALLOY 6063-T6 AND BORON CARBIDE." International Journal of Engineering Applied Sciences and Technology 6, no. 7 (November 1, 2021): 322–32. http://dx.doi.org/10.33564/ijeast.2021.v06i07.050.
Повний текст джерелаKwon, Hansang, Mart Saarna, and Marc Leparoux. "Effects of Processing Parameters on Mechanical Properties of Silicon Carbide Nanoparticle-Reinforced Aluminium Alloy Matrix Composite Materials." Journal of Nanoscience and Nanotechnology 20, no. 10 (October 1, 2020): 6482–88. http://dx.doi.org/10.1166/jnn.2020.17884.
Повний текст джерелаJuang, Shueiwan Henry, and Ching-Feng Li. "Influence of Different Addition Ratios of Fly Ash on Mechanical Properties of ADC10 Aluminum Matrix Composites." Metals 12, no. 4 (April 11, 2022): 653. http://dx.doi.org/10.3390/met12040653.
Повний текст джерелаSekar, K. "Mechanical and Tribological Properties of A7075/ SiC/ B4C Hybrid Composite Fabricated by Stir and Squeeze Casting Method." Key Engineering Materials 882 (April 2021): 77–88. http://dx.doi.org/10.4028/www.scientific.net/kem.882.77.
Повний текст джерелаNagaraja, T. V., and Ravindra Sagar. "Microstructure and Mechanical Behavior of Chromium Oxide Reinforced LM26 Based Metal Matrix Composites." Materials Science Forum 1074 (November 8, 2022): 79–88. http://dx.doi.org/10.4028/p-8n979f.
Повний текст джерела