Статті в журналах з теми "Al-Si-Cu ALLOY"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Al-Si-Cu ALLOY".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Tokuda, Momoko, Kenji Matsuda, Takeshi Nagai, Junya Nakamura, Tokimasa Kawabata, and Susumu Ikeno. "TEM Observation of Cu and Ag Addition Al-Mg-Si Alloys." Advanced Materials Research 409 (November 2011): 81–83. http://dx.doi.org/10.4028/www.scientific.net/amr.409.81.
Повний текст джерелаTokuda, M., K. Matsuda, T. Nagai, T. Kawabata, J. Nakamura, and S. Ikeno. "Hrtem Observation of the Precipitates in Cu and Ag Added Al-Mg-Si Alloys." Archives of Metallurgy and Materials 58, no. 2 (June 1, 2013): 363–64. http://dx.doi.org/10.2478/v10172-012-0200-7.
Повний текст джерелаZhao, Jing Rui, Yong Du, Li Jun Zhang, Shu Hong Liu, Jin Huan Xia, and Jin Wei Wang. "Thermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Si and Al-Cu-Fe-Mg-Si Multicomponent Systems on Al-Rich Side." Materials Science Forum 993 (May 2020): 984–95. http://dx.doi.org/10.4028/www.scientific.net/msf.993.984.
Повний текст джерелаPan, Yan Peng, Zhi Feng Zhang, Bao Li, Bi Cheng Yang, and Jun Xu. "Effect of Alloying Elements on Mechanical Properties of Al-Si-Cu-Mg Cast Alloys." Materials Science Forum 817 (April 2015): 127–31. http://dx.doi.org/10.4028/www.scientific.net/msf.817.127.
Повний текст джерелаBASKOUTAS, S., V. KAPAKLIS, and C. POLITIS. "BULK AMORPHOUS Zr57Cu20Al10Ni8Ti5 AND Zr55Cu19Al8Ni8Ti5Si5 ALLOYS PREPARED BY ARC MELTING." International Journal of Modern Physics B 16, no. 24 (September 20, 2002): 3707–14. http://dx.doi.org/10.1142/s0217979202013018.
Повний текст джерелаZhao, Jing Rui, Yong Du, Li Jun Zhang, Shu Hong Liu, Jin Huan Xia, and Jin Wei Wang. "Thermodynamic Calculation of the Liquidus Projections of the Al-Cu-Fe-Mg, Al-Cu-Mg-Si, and Al-Fe-Mg-Si Quaternary Systems on Al-Rich Corner." Materials Science Forum 993 (May 2020): 1031–42. http://dx.doi.org/10.4028/www.scientific.net/msf.993.1031.
Повний текст джерелаAlexopoulos, Nikolaos D., Vangelis Migklis, Stavros K. Kourkoulis, and Zaira Marioli-Riga. "Fatigue Behavior of Aerospace Al-Cu, Al-Li and Al-Mg-Si Sheet Alloys." Advanced Materials Research 1099 (April 2015): 1–8. http://dx.doi.org/10.4028/www.scientific.net/amr.1099.1.
Повний текст джерелаAsmael, M. B. A., Roslee Ahmad, Ali Ourdjini, and S. Farahany. "Effect of Elements Cerium and Lanthanum on Eutectic Solidification of Al-Si-Cu near Eutectic Cast Alloy." Advanced Materials Research 845 (December 2013): 118–22. http://dx.doi.org/10.4028/www.scientific.net/amr.845.118.
Повний текст джерелаZhang, Huidi, Bin Chen, Jianfei Hao, Huishu Wu, Ming Chen, Weirong Li, Runxia Li, and Biao Wang. "Effects of Cu/Er on Tensile Properties of Cast Al-Si Alloy at Low Temperature." Materials 16, no. 3 (January 17, 2023): 902. http://dx.doi.org/10.3390/ma16030902.
Повний текст джерелаCheng, Xiao Min, Xin Chen, Yuan Yuan Li, and Yong Gang Tan. "Research on the Properties of the Thermal Storage and Corrosion of Al-Si-Cu-Mg-Zn Alloy." Advanced Materials Research 197-198 (February 2011): 1064–72. http://dx.doi.org/10.4028/www.scientific.net/amr.197-198.1064.
Повний текст джерелаWang, Zhige, Liang Dong, Bin Hu, and Bin Chen. "The Effect of Cu Addition on Corrosion Resistance of Al-Si-Mg-Cr Alloy." Metals 13, no. 4 (April 18, 2023): 795. http://dx.doi.org/10.3390/met13040795.
Повний текст джерелаShah, Abdul Wahid, Seong-Ho Ha, Jabir Ali Siddique, Bong-Hwan Kim, Young-Ok Yoon, Hyun-Kyu Lim, and Shae K. Kim. "Microstructure Evolution and Mechanical Properties of Al–Cu–Mg Alloys with Si Addition." Materials 16, no. 7 (March 30, 2023): 2783. http://dx.doi.org/10.3390/ma16072783.
Повний текст джерелаNishikubo, Masaya, Kenji Matsuda, Yoshihisa Oe, Jyunya Nakamura, and Susumu Ikeno. "Aging Precipitation of Al-Mg-Si Alloys with Additions of Ag and Cu." Materials Science Forum 794-796 (June 2014): 981–84. http://dx.doi.org/10.4028/www.scientific.net/msf.794-796.981.
Повний текст джерелаJing, Yan, Chao Zhang, Jun Ma, and Yongzhong Jia. "Corrosion behaviour of Mn‐Si‐Fe‐Cu‐Al alloy explosion suppression materials." Anti-Corrosion Methods and Materials 60, no. 5 (September 6, 2013): 234–38. http://dx.doi.org/10.1108/acmm-08-2012-1197.
Повний текст джерелаMatsuda, Kenji, Junya Nakamura, Tokimasa Kawabata, Susumu Ikeno, Tatsuo Sato, Calin D. Marioara, Sigmund J. Andersen, and Randi Holmestad. "Effect of Additional Elements (Cu, Ag) on Precipitation in 6xxx (Al-Mg-Si) Alloys." Materials Science Forum 706-709 (January 2012): 357–60. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.357.
Повний текст джерелаDong, Zhong-Qiang, Jin-Guo Wang, Zhi-Ping Guan, Pin-Kui Ma, Po Zhao, Zhu-Jin Li, Tian-Shi Lu, and Rui-Fang Yan. "Effect of Short T6 Heat Treatment on the Thermal Conductivity and Mechanical Properties of Different Casting Processes Al-Si-Mg-Cu Alloys." Metals 11, no. 9 (September 13, 2021): 1450. http://dx.doi.org/10.3390/met11091450.
Повний текст джерелаHida, Shintaro, Šárka Mikmeková, Kenji Matsuda, and Susumu Ikeno. "Observation of large Equilibrium Phase of Al-Mg-Si Alloys." Materials Science Forum 794-796 (June 2014): 977–80. http://dx.doi.org/10.4028/www.scientific.net/msf.794-796.977.
Повний текст джерелаА. V., Sinchuk, and Merkkulov O. E. "Reducing the sensitivity of high-silicon Al-Mg-Si(Cu) alloys to intergranular corrosion." Metaloznavstvo ta obrobka metalìv 104, no. 4 (December 30, 2022): 11–21. http://dx.doi.org/10.15407/mom2022.04.011.
Повний текст джерелаXu, Ding, Yang, Zhang, Gao, Wu, Chen, Chen, Huang, and Tang. "Effect of Si Addition on Mechanical and Electrochemical Properties of Al-Fe-Cu-La Alloy for Current Collector of Lithium Battery." Metals 9, no. 10 (October 1, 2019): 1072. http://dx.doi.org/10.3390/met9101072.
Повний текст джерелаAchiţei, Dragoş Cristian, Petrică Vizureanu, Mirabela Georgiana Minciună, Mohd Mustafa Al Bakri Abdullah, and Ioan Gabriel Sandu. "Study on Al-Si Alloys Properties Enhancement." Applied Mechanics and Materials 754-755 (April 2015): 634–38. http://dx.doi.org/10.4028/www.scientific.net/amm.754-755.634.
Повний текст джерелаPark, M., S. J. Krause, and S. R. Wilson. "The effects of deposition and annealing condition on the microstractural evolution of Al-Cu and Al-Cu-Si thin films." Proceedings, annual meeting, Electron Microscopy Society of America 49 (August 1991): 822–23. http://dx.doi.org/10.1017/s0424820100088427.
Повний текст джерелаARSLAN, Hüseyin. "Viscosity Values of Ternary Au-Ag-Cu, Al-Cu-Si and Quaternary Al-Cu-Mg-Si Alloy Systems." Afyon Kocatepe University Journal of Sciences and Engineering 23, no. 4 (August 29, 2023): 865–73. http://dx.doi.org/10.35414/akufemubid.1198907.
Повний текст джерелаLech-Grega, Marzena, and Sonia Boczkal. "Iron Phases in Model Al-Mg-Si-Cu Alloys." Materials Science Forum 674 (February 2011): 135–40. http://dx.doi.org/10.4028/www.scientific.net/msf.674.135.
Повний текст джерелаYANIL, Aumphol, Patama VISUTTIPITUKUL, Ekasit NISARATANAPORN, and Charasphat PREUKSARATTANAWUT. "Effects of Indium and Gallium ratio on tarnish resistance, corrosion and mechanical properties of 950 silver alloy." Journal of Metals, Materials and Minerals 33, no. 1 (March 28, 2023): 39–46. http://dx.doi.org/10.55713/jmmm.v33i1.1589.
Повний текст джерелаVASCONCELOS, ANGELA J., RAFAEL H. KIKUCHI, ANDRÉ S. BARROS, THIAGO A. COSTA, MARCELINO DIAS, ANTONIO L. MOREIRA, ADRINA P. SILVA, and OTÁVIO L. ROCHA. "Interconnection between microstructure and microhardness of directionally solidified binary Al-6wt.%Cu and multicomponent Al-6wt.%Cu-8wt.%Si alloys." Anais da Academia Brasileira de Ciências 88, no. 2 (May 31, 2016): 1099–111. http://dx.doi.org/10.1590/0001-3765201620150172.
Повний текст джерелаLei, Qian, Jian Wang, and Amit Misra. "Mechanical Behavior of Al–Al2Cu–Si and Al–Al2Cu Eutectic Alloys." Crystals 11, no. 2 (February 16, 2021): 194. http://dx.doi.org/10.3390/cryst11020194.
Повний текст джерелаBurapa, R., S. Rawangwong, J. Chatthong, and Worapong Boonchouytan. "Effects of Mold Temperature and Casting Temperature on Hot Cracking in Al-4.5 wt.% Cu Alloy." Advanced Materials Research 747 (August 2013): 623–26. http://dx.doi.org/10.4028/www.scientific.net/amr.747.623.
Повний текст джерелаBae, Chul-Hong, Seong-Ho Ha, Bong-Hwan Kim, Young-Ok Yoon, Hyun-Kyu Lim, Shae K. Kim, and Young-Jig Kim. "Correlation of Surface Oxidation and Mg-Based Intermetallic Phases in Grain Boundaries of Al–Mg Alloys Containing Third Elements." Journal of Nanoscience and Nanotechnology 21, no. 3 (March 1, 2021): 2055–58. http://dx.doi.org/10.1166/jnn.2021.18948.
Повний текст джерелаKim, In Bae, Kwang Nyeon Kim, Kyung Hyun Kim, and In Gon Kim. "Effects of Silicon and Chromium on the SCC Properties of Al-Zn-Mg-Cu Cast Alloy." Materials Science Forum 449-452 (March 2004): 585–88. http://dx.doi.org/10.4028/www.scientific.net/msf.449-452.585.
Повний текст джерелаKarlík, Miroslav, Jiri Faltus, Jitka Nejezchlebová, Petr Haušild, and Petr Harcuba. "Characterisation of Al-Cu and Al-Mg-Si Free-Cutting Alloys." Materials Science Forum 794-796 (June 2014): 1181–86. http://dx.doi.org/10.4028/www.scientific.net/msf.794-796.1181.
Повний текст джерелаIbrahim, Mohamed, Mohamed Abdelaziz, Agnes Samuel, Herbert Doty, and Fawzy Samuel. "Spheroidization and Coarsening of Eutectic Si Particles in Al-Si-Based Alloys." Advances in Materials Science and Engineering 2021 (January 19, 2021): 1–16. http://dx.doi.org/10.1155/2021/6678280.
Повний текст джерелаZhang, Zuo Gui, Eiji Akiyama, Yoshimi Watanabe, Yasuyuki Katada, and Kaneaki Tsuzaki. "Corrosion Behavior of Al-7wt% Si-1.5wt% Cu Severely Deformed by Equal-Channel Angular Pressing." Materials Science Forum 539-543 (March 2007): 2892–97. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.2892.
Повний текст джерелаCurle, Ulyate Andries, Heinrich Möller, and Gonasagren Govender. "R-HPDC in South Africa." Solid State Phenomena 192-193 (October 2012): 3–15. http://dx.doi.org/10.4028/www.scientific.net/ssp.192-193.3.
Повний текст джерелаUmemoto, M., M. Udaka, K. Kawasaki, and X. D. Liu. "Formation of ultrafine powders of binary alloy systems by plasma jet." Journal of Materials Research 13, no. 6 (June 1998): 1511–16. http://dx.doi.org/10.1557/jmr.1998.0210.
Повний текст джерелаChe, Xin, Feng Li, and Li Jia Chen. "Low-Cycle Fatigue Behavior of Permanent-Mold Cast and Die-Cast Al-Si-Cu-Mg-Sc Aluminum Alloys." Applied Mechanics and Materials 184-185 (June 2012): 1044–49. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.1044.
Повний текст джерелаHan, Yi, Chu Yan Wang, Tong Guang Zhai, and Hiromi Nagaumi. "Morphology of Si Phase in Al-Mg-Si-Cu Alloys with Excess Si Addition." Materials Science Forum 783-786 (May 2014): 161–67. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.161.
Повний текст джерелаLuo, Xiao Ping, Lan Ting Xia, and Ming Gang Zhang. "Study of Si/Al Ratio and Modification of Silicon Morphology in ZA27 Alloys." Advanced Materials Research 145 (October 2010): 298–301. http://dx.doi.org/10.4028/www.scientific.net/amr.145.298.
Повний текст джерелаJin, Xiaojie, Pizhi Zhao, Shijie Guo, Wenjing Zhang, Nianmei Han, Yunlong Zhang, and Guojun Wang. "Effect of Cu and Mg on the corrosion behavior of 4004/Al-Mn-Cu-Mg-Si/4004 aluminum alloy brazing sheet." MATEC Web of Conferences 326 (2020): 04001. http://dx.doi.org/10.1051/matecconf/202032604001.
Повний текст джерелаRajaram, G., S. Kumaran, and T. Srinivas Rao. "Tensile Behaviour of Al-Si Alloy and Al-Si/Graphite Composites at Elevated Temperatures." Materials Science Forum 710 (January 2012): 457–62. http://dx.doi.org/10.4028/www.scientific.net/msf.710.457.
Повний текст джерелаZhou, Pengfei, Dongtao Wang, Hiromi Nagaumi, Rui Wang, Xiaozu Zhang, Xinzhong Li, Haitao Zhang, and Bo Zhang. "Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents." Metals 13, no. 1 (January 2, 2023): 98. http://dx.doi.org/10.3390/met13010098.
Повний текст джерелаWang, Xiaoguo, Jian Qin, Hiromi Nagaumi, Ruirui Wu та Qiushu Li. "The Effect of α-Al(MnCr)Si Dispersoids on Activation Energy and Workability of Al-Mg-Si-Cu Alloys during Hot Deformation". Advances in Materials Science and Engineering 2020 (20 травня 2020): 1–12. http://dx.doi.org/10.1155/2020/3471410.
Повний текст джерелаYu, Si Rong, Jun Xu, Xiao Hua Zhang, Qiang Yao, and Shu Miao Xu. "Al-Si-Mg-Cu Heat Storage Alloys and their Heat Storage Properties." Materials Science Forum 743-744 (January 2013): 24–28. http://dx.doi.org/10.4028/www.scientific.net/msf.743-744.24.
Повний текст джерелаYu, Wei Yuan, Wen Jiang Lu, and Nai Rui Li. "Microstructures and Properties of Al-Cu-Si Brazing Foils by Melt-Spun Processing." Advanced Materials Research 583 (October 2012): 268–71. http://dx.doi.org/10.4028/www.scientific.net/amr.583.268.
Повний текст джерелаTagami, M., A. Sugafuji, Y. Yabumoto, Ken-Ichi Ohguchi, and A. Muto. "Wear Behavior of Graphite-Dispersed Al-Sn-Si Alloys." Materials Science Forum 449-452 (March 2004): 629–32. http://dx.doi.org/10.4028/www.scientific.net/msf.449-452.629.
Повний текст джерелаLiu, Yang, Guodong Li, and Wenting Jiang. "Effects of Cu-Coated SiC Content on Microstructure and Properties of Laser Cladding SiCp/Al–Si Composite Coatings." Materials 12, no. 9 (May 10, 2019): 1537. http://dx.doi.org/10.3390/ma12091537.
Повний текст джерелаWang, Xiaoguo, Jian Qin, Fangzhen Liu, Yifeng Li, and Hiromi Nagaumi. "Application of Color Metallography on As-cast Al-Mg-Si-Cu-Mn Alloy during Heat Treatment." Journal of Physics: Conference Series 2174, no. 1 (January 1, 2022): 012040. http://dx.doi.org/10.1088/1742-6596/2174/1/012040.
Повний текст джерелаAhmad, Roslee, and M. B. A. Asmael. "Effect of Cerium Addition and Cooling Rate on Microstructure of ADC12 Eutectic Cast Alloy." Advanced Materials Research 1119 (July 2015): 486–89. http://dx.doi.org/10.4028/www.scientific.net/amr.1119.486.
Повний текст джерелаOglodkova, Yu S., K. V. Antipov, M. D. Panteleev, and A. S. Rudchenko. "Study of weldability of semi-products from an alloy of the Al – Mg – Si – Cu system." Perspektivnye Materialy 3 (2023): 5–13. http://dx.doi.org/10.30791/1028-978x-2023-3-5-13.
Повний текст джерелаLiu, Hai Jun, Lie Jun Li, Jian Wei Niu, Ji Xiang Gao, and Chuan Dong Ren. "Effect of Mg and Cu Additions on Microstructure and Mechanical Properties of Squeeze Casting Al-Si-Cu-Mg Alloy." Materials Science Forum 850 (March 2016): 511–18. http://dx.doi.org/10.4028/www.scientific.net/msf.850.511.
Повний текст джерелаSong, Tae-Ung, Ja-Uk Koo, Seung-Byeong Jeon, and Chang-Yeol Jeong. "Investigation of Phase Transformation and Mechanical Properties of A356 Alloy with Cu and Zr Addition during Heat Treatment." Korean Journal of Metals and Materials 61, no. 5 (May 5, 2023): 311–23. http://dx.doi.org/10.3365/kjmm.2023.61.5.311.
Повний текст джерела