Дисертації з теми "Adhesive plaster"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-43 дисертацій для дослідження на тему "Adhesive plaster".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Liu, Yifan. "Preparation and properties of oral adhesive plaster containing Periplaneta extract." Магістерська робота, Kyiv National University of Technology and Design, 2021. https://er.knutd.edu.ua/handle/123456789/19275.
Повний текст джерелаKomarova, O. P., and I. Y. Korneev. "Development of a new sticky material for medical adhesive plaster." Thesis, Харківський національний медичний університет, 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/19466.
Повний текст джерелаRoberts, Alan Clive. "The Development of Facial Prosthetics and Adhesives in Plastic and Reconstructive Surgery. A study in the application of prosthetic materials and devices used in plastic and reconstructive surgery together with tissue adhesives as an alternative to conventional ligation." Thesis, University of Bradford, 1988. http://hdl.handle.net/10454/5065.
Повний текст джерелаPhung, Kent, and Charles Chu. "Adhesives for Load-Bearing Timber-Glass Elements : Elastic, plastic and time dependent properties." Thesis, Linnéuniversitetet, Institutionen för bygg- och energiteknik (BE), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-27386.
Повний текст джерелаChan, Edward King-Long. "A study of moisture diffusion at the epoxy/copper interface for plastic IC packages /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?MECH%202006%20CHAN.
Повний текст джерелаFalk-Brynhildsen, Karin. "The effect of peroperative skin preparation on bacterial growth during cardiac surgery." Doctoral thesis, Örebro universitet, Institutionen för hälsovetenskap och medicin, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-31039.
Повний текст джерелаBrückner, Julian Karl. "Adhäsionskräfte von Artikulationsgipsen an Typ 3 und 4 Modellgips. Eine in vitro Studie." Doctoral thesis, Universitätsbibliothek Leipzig, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-168928.
Повний текст джерелаOporto, Velásquez Gloria S. "Characterizing the Mechanism of Improved Adhesion of Modified Wood Plastic Composite (WPC) Surfaces." Fogler Library, University of Maine, 2009. http://www.library.umaine.edu/theses/pdf/OportoVelasquezGS2009.pdf.
Повний текст джерелаMoosa, Naina Mohamed Lebbai. "Improvement of interfacial adhesion in plastic packages--dimples, metallic coatings and black oxide /." View Abstract or Full-Text, 2002. http://library.ust.hk/cgi/db/thesis.pl?MECH%202002%20MOOSA.
Повний текст джерелаBatra, Ashish. "Stress relieving technique for plastic packages in a high volume manufacturing environment." Diss., Online access via UMI:, 2009.
Знайти повний текст джерелаIncludes bibliographical references.
Cookson, Mary Catherine. "An elastic-plastic interface constitutive model for combined normal and shear loading : application to adhesively bonded joints." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62527.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 111-112).
The behavior of mechanical adhesive interfaces when subjected to a variety of separation and slide loading modes, strain rates, and thermal conditions are of interest in many technical areas. An elastic-plastic constitutive model for adhesive interfaces subjected to combined normal and shear loading has been developed and numerically implemented in a finite element software package. The traction-separation behavior is defined for the normal and shear mechanisms and a displacement jump angle is found to drive the behavior of the initial strength values, as well as the critical and failure displacement jumps of the separate mechanisms that are used to define the model. A set of calibration experiments are performed to fully define an aluminum/adhesive/aluminum system subjected to five different combined loading angles. Tension and shear tests on the aluminum/adhesive/aluminum system at three different rates are used to determine the sensitivity of the adhesive interface to strain rate. The capability of the constitutive model is then explored for the geometry of bonded curvilinear blocks at different loading angles and for a notched four point bend geometry. In addition, a rate dependent elastic-plastic interface constitutive model for combined normal and shear loading is presented, and an initial calibration of inelastic strain rate sensitivity parameters are found.
Sponsored by the Department of the Air Force FA8721-05-0002
by Mary Catherine Cookson.
S.M.
Khan, Minhaj A. "Development of rules for the design of adhesively bonded fibre-reinforced plastic composite joints in aerospace applications." Thesis, University of Surrey, 2018. http://epubs.surrey.ac.uk/848672/.
Повний текст джерелаManngård, Johanna. "Evaluation of surface treatment techniques for polypropylene andimplementation of a method for testing ink adhesion." Thesis, Högskolan Dalarna, Grafisk teknik, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:du-3524.
Повний текст джерелаYáñez-Pacios, Andrés Jesús. "Tratamiento superficial de materiales compuestos de madera y plástico (WPCs) para mejorar sus propiedades de adhesión." Doctoral thesis, Universidad de Alicante, 2016. http://hdl.handle.net/10045/66611.
Повний текст джерелаShoaib, Muhammad. "Discrete element simulation of elasto-plastic shock waves in high-velocity compaction." Doctoral thesis, KTH, MWL Marcus Wallenberg Laboratoriet, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-31144.
Повний текст джерелаQC 20110311
KORICHO, ERMIAS GEBREKIDAN. "Implementation of Composites and Plastics Materials for Vehicle Lightweight." Doctoral thesis, Politecnico di Torino, 2012. http://hdl.handle.net/11583/2497432.
Повний текст джерелаAnnapragada, Sriram Kiran. "Mechanism of Foaming on Polymer-Paperboard Composites." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19790.
Повний текст джерелаKluge, Axel, Johannes Henneberg, Chokri Cherif, and Andreas Nocke. "Methods for adhesion/friction reduction of novel wire-shaped actuators, based on shape memory alloys, for use in adaptive fiber-reinforced plastic composites." Sage, 2015. https://tud.qucosa.de/id/qucosa%3A35612.
Повний текст джерелаCai, Shaobiao. "3D numerical modeling of dry/wet contact mechanics for rough, multilayered elastic-plastic solid surfaces and effects of hydrophilicity/hydrophobicity during separation with applications." Columbus, Ohio : Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1205118488.
Повний текст джерелаWallin, Harald. "An investigation of friction graphs ranking ability regarding the galling phenomenon in dry SOFS contact : (Adhesive material transfere and friction)." Thesis, Karlstad University, Faculty of Technology and Science, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-2790.
Повний текст джерелаThe main purpose of this project is to investigate different tool steels in terms of their ability to withstand material transfer buildup, so-called galling, occurring in SMF (sheet metal forming) operations. The ability to withstand galling is vital to optimize cost-effectiveness and increase the work tool’s effective operational time. This investigation studies four different tool steels, including a TiN-coating, with the intention of evaluating the microstructures, chemical composition and hardness effect on galling resistance in dry conditions using a slider-on-flatsurface (SOFS) tribo-tester which measures the coefficient of friction during sliding.
An OP (optical profilometer) was used to measure the size and geometry of lump growth on the tool and damage on the work sheet. A scanning electron microscope (SEM) was used to identify the interacting tribological mechanisms exhibited at different stages during the slide. The SEM figures confirmed three different types of characteristic patterns exhibited in the tracks after tribo- testing which were categorized as mild adhesive, abrasive and severe adhesive damage.
A SEM figure that illustrates a ragged contact surface and an obvious change in the sheet materials plastic behavior is in this report regarded as a sign of severe adhesive contact, the characteristics could possibly be explained by local high temperature and high pressure followed by a sudden pressure drop and creation of hardened welds or solders between the two surfaces which increase the frictional input needed for further advancement. Friction coefficients observed in the initial 100% mild adhesive stage were, μ=0,22-0,26 succeeded by abrasive SEM characteristics often in association with mild adhesive contact and friction values between μ=0,25-0,4 which where sometimes followed by severe adhesive SEM characteristics in 100% of the contact zone with friction values between μ=0,34- 0,9 respectively. The tool material that performed best according to the friction detection criteria was Sv21 closely followed by Sleipner (TiN coated) and Va40 (HRC 63.3). Unfortunately was the friction criteria, a significant raise in friction for defining a sliding length to galling, not adequate for dry conditions due to immediate material transfer succeeded by cyclic changes between partial or 100% abrasive+mild adhesive and severe adhesive contact. The mechanism that change abrasive wear in association with mild adhesive contact, (moderate friction input), to sever adhesive wear, (higher friction input), is dependent on lump shape (lump geometry) and can appear at comparably low speeds 0,04-0,08 [m/s] and low friction energy input (μ=0,34), the magnitude of the change in friction is therefore not always significant and hardly detectable on the friction graph. This was quite unexpected but could be explained by concentration of friction energy rater than the absolute amount. The problem with using friction graphs for galling evaluation was increased even further when a very small lump size and low corresponding rate of material transfer to the tool surface caused a sustainable high raise in friction (μ≈0,3→0,6) on a TiN-coated tool steel called Sleipner.
A hardly detectable or similar friction raise for Sv21 and Va40 showed much larger corresponding lump size and rate of material transfer. This means that friction graphs demonstrate a clear problem with quantifying lump size [m3] and rate of material transfer [m3/s]. Another phenomenon called stick slip behavior, material transfer and lump growth followed by a sudden decrease in lump size and transfer of material back to the work sheet, is also not possible to detect on a friction graph. Because a drop in friction can easily be a change in contact temperature and lump attack angle due to a growing lump and not a decreasing lump.
The conclusion, a friction graph is not suited for galling evaluation and ranking in dry SOFS conditions. A ranking should primarily be based on dimensional OP measurements of the cross section of formed tracks and scratches or preferably by repeated OP measurements of the tool surface during a single test, the last revel the exact lump growth history and true lump growth even in the sliding direction.
civilingenjörsexamen
Schönström, Linus, Anna Nordh, Anton Strignert, Frida Lemel, Jakob Ekengard, Sofie Wallin, and Zargham Jabri. "A process recipe for bonding a silicone membrane to a plastic substrate." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-201008.
Повний текст джерелаLiang, Fenglin. "Caractérisation et modélisation du comportement rhéologique des boues résiduaires urbaines concentrées." Thesis, Ecole nationale des Mines d'Albi-Carmaux, 2016. http://www.theses.fr/2016EMAC0014/document.
Повний текст джерелаHuman daily activities generate a large quantity of wastewater that should be treated in order to minimise the sanitary risk and impacts on the environment. Sewage sludge is the main co-product of the wastewater treatment. Specific processes are implemented to reduce its volume and improve its sanitary quality before valorisation. As dewatered sludge is a mixture of water, microorganisms, fibres, colloidal and non-colloidal particles, organic polymers, etc., with the increase of its solid content, difficulties in pumping, conveying or discharging handling are frequently encountered during these treatments. The rheological characterisation of this heterogeneous material still remains a scientific and technical challenge, especially when solid mass content exceeds 20%. In this work, an entire methodology linking experimental measurements and modelling has been developed to characterise the rheological properties and the stickiness of sewage sludge. This methodology is suitable for sludge behaving as a soft solid (evaluated by slumping test) and as long as the material stays below its plastic limit (by the ASTM D 4318 initially standardized for soils). In this dissertation, the methodology is applied to dewatered sludge of total solid content around 20% by weight. This method includes uniaxial compression tests (from very large deformation to small one with single or two cycles of loading-unloading) using a universal materials testing machine of Lloyd Instrument and shearing tests using a device designed and fabricated in our laboratory for quantifying the sticky properties of sludge. These tests can identify the bioyield of the material, the orders of magnitude of the elastic modulus, viscosity, yield stress and resilience, the maximum adhesive and cohesive stresses, and finally the energy of adhesion. An analogical mechanical model is then established. The viscoelastic and visco-elasto-plastic behaviours under uniaxial cyclic compression can thus be simulated with this conceptual model of 7 parameters, named “Burgers-Ludwik”. This model is based on the fundamental mechanical laws of Hooke, Newton and the equation of Ludwik for simulating plastic hardening of material. A multi-step program based on non-linear multiple regressions is coded to optimize the model parameters with Matlab®. The sensibility of this methodology is highlighted by testing the changes in rheological properties of sewage sludge induced by processing or storage. Mixing makes the sludge more adhesive while storage makes it less cohesive. Both make the sludge easier to deform
Jasevičius, Raimondas. "The Numerical Modelling of Normal Interaction of Ultrafine Particles." Doctoral thesis, Lithuanian Academic Libraries Network (LABT), 2011. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20110224_161120-06365.
Повний текст джерелаUltrasmulkios dalelės yra šiuolaikinės chemijos, farmacijos, maisto ir kitų pramonės šakų produktų sudėtinė dalis. Tiriant pramoninius technologinius procesus, neišvengiamai reikalingos teorinės žinios apie ultrasmulkių dalelių elgseną. Išsamus supratimas įmanomas tik atlikus įvairius tyrimus. Pastaruoju metu milteliai, klasifikuojami kaip ultrasmulkios (0,1 < d < 10 μm) dalelės, imti plačiai naudoti pramoniniuose procesuose, todėl suprasti ultrasmulkių dalelių elgsenos fundamentalumą miltelių technologijoje yra labai svarbu. Ultrasmulki dalelė yra itin maža, todėl su ja atlikti fizinį eksperimentą, kuris reikalauja specialios įrangos bei žinių, labai sunku. Tokiu atveju dažniausiai naudojamas skaitinis eksperimentas, kurį galima atlikti virtualiai. Skaitinio eksperimento metu yra tiriamos dinaminės ultrasmulkios dalelės savybės bei sprendžiamas dinaminis uždavinys. Taikant skaitinius modelius bei dalelės judėjimą aprašančias jėgų lygtis, naudojami sąveikos modeliai, apimantys adhezinę, klampią, tamprią bei tampriai plastinę sąveikas. Mikroskopinis adhezinės sąveikos modeliavimas – aktualus mechanikos mokslo uždavinys. Taikant sąveikos modelius, svarbu pritaikyti ir diskrečiųjų elementų metodą, kadangi, norint aprašyti dalelių elgseną, visų pirma reikia su-vokti ir aprašyti dalelės modelį. Dalelės elgsenos skaitiniam modeliavimui siūlomi teoriniai modeliai leidžia tirti dalelės sąveiką su dalele ar tampria puserdve bei sąveikos dinamiką. Šie modeliai galėtų būti pritaikyti... [toliau žr. visą tekstą]
Huang, Wei-Jou, and 黃瑋柔. "Investigation of Adhesion between Silicone Adhesives and Plastic Materials." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/a22h92.
Повний текст джерела國立臺北科技大學
有機高分子研究所
102
This study examines the characteristics of adhesion for silicone adhesives to plastics. Two different types of plastics are used as test samples. They are polyethylene terephthalate (PET) film with a thickness of 0.05 mm and polypropylene (PP) sheet with a thickness of 0.7 mm. After corona discharge treatment (CDT) for PET films and PP sheets, those films and sheets are immediately coated with three different silicone adhesives, namely A, B, and C. The coated samples are placed by 5, 10, 20, and 30 minutes in the environment which is room temperature and relative humidity of 50 ~ 60%. The samples of the same plastics and adhesives are pressed together with 10 kg force and by 24 hrs in the previous environment. Those samples are used for the test of peel strength after 24 hrs. The pH values for silicone adhesives A, B, and C are 10, 5, and 3, respectively. Experimental results indicate that among three silicone adhesives, adhesive A shows the best of adhesion for PET film and PP sheet treated by corona and adhesive C gives the worst of adhesion for PET film and PP sheet. The peel strength of PP sheets without CDT coated the three silicone adhesives is near zero. That means very poor adhesion for the three silicone adhesives to PP sheets without CDT. When a sample has a high peel strength, the place of peel for the sample normally occurs in adhesives. However, when a sample shows a low peel strength, a poor adhesion always happen at the interface between plastics and adhesives.
Vijaya, Kumar R. L. "Some Experimental and Numerical Studies on Evaluation of Adhesive Bond Integrity of Composites Lap Shear Joints." Thesis, 2014. http://etd.iisc.ac.in/handle/2005/3220.
Повний текст джерелаChang, Reiyuan, and 張瑞元. "The study of adhesive performance between fiber reinforcement plastic and concrete." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/80042273161198200924.
Повний текст джерела國立中央大學
土木工程學系
85
ABSTACT Application of epoxy bonded fiber reinforcement plastic (FRP) to the surface of concrete structure combines two different materials into acomposite one and the integrity of the structure can be improved. Since this is a new method and information on the durability of the materials is lacking. Performance of the bonding between concrete and FRP under different scenarios is considered essential to the success of the method. Since fiber reinforcement plastic bonded to reinforced concrete beam tends to shear and normal stress concentration at the end of FRP under loads. This study investigates the bonding efficiency of epoxybonded FRP experimentally with emphasis on the durability of the bonding. The performance of two epoxy adhesives applied for bonding concrete and FRP has been studied, with specimens subject to 3 different loading conditions. Specimens were then exposed to thermal fluctuation, wet-dry cycling and ultraviolet light irradiating. Results obtained from these tests indicated that the treatment of concrete surface is very important to the bonding efficiency. The best adhesive effect occurs when coarse aggregates in concrete are exposed to bonding. The alternate heating and cooling has a detrimental effect on the bond between concrete and FRP. The adhesive strength of specimens in a saturated situation is less than that in an air-dry situation. There was no marked difference in the performance of specimens after immersion of specimens in water for 2 months.
Vijaya, Kumar R. L. "Some Experimental and Numerical Studies on Evaluation of Adhesive Bond Integrity of Composites Lap Shear Joints." Thesis, 2014. http://hdl.handle.net/2005/3220.
Повний текст джерелаJohnson, Rachel. "Expanding the possibilities adhesives and coatings for the theatrical application of plastic foams /." 2005. http://catalog.hathitrust.org/api/volumes/oclc/61134673.html.
Повний текст джерелаTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 170-175)
Shih, Jin-Yu, and 石晉羽. "Improving the adhesion of plastic substrate by surface-activated functional groups." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/74s5kw.
Повний текст джерела國立中央大學
光電科學與工程學系
107
In recent years, with the development of smart automotive electronics, the use of plastic as a substrate for automotive display has a unique product value of low cost, good optical properties, and corrosion resistance. However, compared with glass, the adhesion for plastic between the substrate and the film is worst due to it low surface energy. Moreover, it is easily absorb some water contents on its surface, causing the out-gassing during the deposition process. In order to solve the above problem of plastic coating, the study performs a baking treatment for plastic substrate before thin film deposition, and establishes an experimental method for removing the water contents in a short time. The surface of the plastic is modified by an ion source to increase the number of surface functional groups, greatly improve the adhesion of the substrate surface to the film. The functional groups are measured by FTIR. We also deposited an oxygen-deficient thin film as an interlayer between substrate and anti-reflective(AR) coating. Finally, the plastic substrate treated by baking, surface activation, and adhesion layer deposition can pass the high temperature/humidity environmental test for 1000 hours without thin films peeling.
Yeh, Ren-Yu, and 葉人瑜. "Influence of Micro-mechanical Interlocking on Bonding Strength of Plastic/Metal Direct Adhesion." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/44437022855560275719.
Повний текст джерела國立交通大學
機械工程系所
104
Every material has its unique material properties, which can bring benefits or shortcomings. As advances of technologies, use of only one particular material very often cannot meet the demand of products. Thus, joining of dissimilar materials, especially between metal and plastic, has become a key issue in many industries. Industrial joining of dissimilar materials is generally performed by using adhesive bonds. Nevertheless the usage of adhesives is not environmentally friendly and takes long curing time. Several direct adhesion technologies have been developed, such as insert injection molding, hot pressing, laser welding, ultrasonic welding, and friction lap welding. These technologies were achieved by several different joining mechanisms, however, micro mechanical interlocking is considered as one of the major factor of the direct adhesion. The direct adhesion technologies based on micro mechanical interlocking were studied and developed in this thesis. In the first part, ABS and PBT+30%GF parts were formed and joined on micro-structured A5052 parts by injection molding method. An in-mold heating device was used to heat the metal insert independently. The PBT+30%GF could be joined onto the anodized, PEO, laser treated metal insert when the metal insert heated over 130°C. However, the ABS part could only joined onto laser specimen. In the second part, a low energy demand ultrasonic direct adhesion technology was carried out by the laser micro structure on the metal surface. The ABS parts were joined onto A5052 laser specimens by weld energy lower than 100J in 1sec. A method to predict the shear bond strength of micro-mechanical interlocking was established, and the shear bond strength of ABS/A5052 laser structured specimens were near the theoretical strength. The highest shear bond strength of injection molding was 14MPa, which was 36% of the plastic tensile strength. The highest shear bond strength of ultrasonic direct adhesion was 11MPa, which was 28% of the plastic tensile strength.
LIN, KUEI-JU, and 林桂如. "High-Density Plasma Treatment for Plastic Substrates and Its Effect on Adhesion Properties." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/93320269227890856163.
Повний текст джерела國立中興大學
材料工程學研究所
92
Thin-film coatings on flexible substrates have played an important role in future flexible-panel-display applications. Plastic substrates [polyethersulfone (PES), polycarbonate (PC) and polyethylene terephthalate (PET)] have many advantages, such as high shock-resistant, flexible and excellent mechanical properties. They are presently widely used as substrates for flexible organic light-emitting displays. A problem frequently encountered in utilizing the polymeric substrates is the poor adhesion property between the deposited film and substrate. Generally, plasma surface treatment of polymeric substrate is an essential method to improve the interface bonding. In this thesis, the adhesion properties of the SiOX barrier layer on polymer substrates were investigated by high-density plasma. From the experimental analysis, it is confirmed that the plasma pretreatment can provide hydrophilic surfaces for the PES and PC substrates. Under the same plasma treatment condition, the etch rate of the PES substrate is always smaller than that of the PC substrate. For the PES substrate, the bond interlocking between the SiOX and rough polymer surface was formed by the oxygen plasma and improved the adhesion. The Ar plasma pretreatment can enhance adhesive strength to a level of 16.5 N/mm2. The formation of C-S-Si or C-S-O-Si bonds between SiOX and PES interface examined by the x-ray photoemission spectroscopy could contribute the present results. On the other hand, the Ar plasma pretreatment of the PC substrate attributes to the O=C-Si bond formation and improves the adhesion to a level of 13.4 N/mm2; the Ar plasma pretreatment of the PET substrate attributes to the C-C-Si bond formation and improves the adhesion to a level of 4.77 N/mm2 .Based on these results, the high-density-plasma treatment has demonstrated as an efficient method to enhance the interface adhesion of the barrier coatings on plastic substrates.
Lu, Kuan-Wei, and 盧冠為. "Improvement of Adhesion between Optical Film and Plastic Substrate by Using Plasma Polymerization Film." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/wrrk64.
Повний текст джерела國立中央大學
能源工程研究所
106
Optical components are used in many electronic products in daily life. The demand for lightweight and portable electronic products is increasing, therefore, the use of plastic substrates becomes important. However, the insufficient adhesion on plastic substrates has been a serious problem of the production of optical components. In this experiment, a material with high surface free energy is introduced to deposit a polymer film by using plasma polymerization technique. The optical thin film material silicon dioxide (SiO2) was coated to investigate the improvement of the adhesion between the substrate and the optical film in each process step. In the research, four plastic material, PMMA, 330R, 480R and PC, are used as substrates. The etching process has been adopted to increase the contact area. The surface roughness can be increased up to 61.9 nm. After plasma pretreatment on the substrate surface, the hydroxyl group are activated. The water contact angle can be measured less than 10 degrees, indicating that the surface free energy has been improved. Due to the poor persistent of the hydroxyl group, the polymer film with nitrogen-containing function groups is coated, which can improve the surface free energy more effectively. The increasing of the percentage of nitrogen can be observed by XPS. After the above steps, the optical films are coated. Although etching process cannot improve the adhesion of all the substrates, the four substrates achieve completely adhesion after depositing the polymer film. Besides, the optical property of the substrates is well maintained.
"Thermo-Mechanical Analysis of Temporary Bonding Systems for Flexible Microelectronics Fabrication Applications." Doctoral diss., 2011. http://hdl.handle.net/2286/R.I.9038.
Повний текст джерелаDissertation/Thesis
Ph.D. Chemical Engineering 2011
Chen, Shuh-Heng, and 陳述亨. "A Study on The Improvement of Interfacial Adhesion Strength of Glass Fiber / Thermal Plastic Composites." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/61037654354600728203.
Повний текст джерела國立臺灣科技大學
纖維及高分子工程研究所
88
Through the plasma polymerization, monomers; styrene (ST)、acrylonitrile (AN)、tetramethylsilane (TMS)、hexamethyldisiloxane (HMDSO) 、2,2,4,4,6,6,-hexamrthylcyclotrisilazane (HMCTSN)、1,1,1,3,3,3,-hexamethyldisilazane (HMDSN)were polymerized onto the surface of glass fiber. The surface chemistry deposition were measurement by XPS, the surface free energy by static & dynamic contact angle, and surface morphology after plasma treated by SEM. Through the formation of a transcrystalline layer on the surface of glass fibre, the interfacial adhesion strength between resins and glass fibre was improved. After the glass fibre was treated with coupling agent, six different monomers were used to polymerize on the surface of glass fibre by plasma. The plasma polymers on glass fibre surface changed the surface morphology and surface free energy. The experimental results indicate that the particle-like surface would induce a transcrystalline layer to form on fibre surface improve polypropylene, polyetheretherketone and Nylon 6.6 /glass fibre interfacial shear strength rather than the glass fibre treated with coupling agent only. The glass fibre treated coupling agent than treated with acrylonitrile and styrene increased the interfacial adhesion strength between polypropylene and glass fibre by 65% and 81%. The glass fibre surface treated with particle-like organosilicon, plasma polymerized hexamethyldisilazane (ppHMDSN), ppTMS and ppHMDSO, would induce a transcrystalline layer to form and increased the interfacial shear strength of glass fiber/polypropylene by 196%, the interfacial shear strength of glass fiber/Nylon 66 and glass fiber/poltetherehterketone by 147%and 152% respectively.
Lin, Michael Wayne 1980. "Simulation and design of planarizing materials and interfacial adhesion studies for step and flash imprint lithography." 2008. http://hdl.handle.net/2152/17933.
Повний текст джерелаtext
何志成. "Effect of Molecular Adhesion on the Elastic-Plastic Contact Between the Fractal Rough Surface and a Plane." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/91410958607133802944.
Повний текст джерела國立中興大學
機械工程學系
88
Abstract In the present paper , a rough surface against a flat plane are investigated. The smoothly rough surface is generated by the two-variable W-M function derived from fractal theory. The relationship of actual contact area versus the contact loading and the effect of molecular adhesion on the contact loading are analyzed numerically using Hertzian theory and JKR model. The numerical analysis is performed by considering the volume conservation of plastically deformed asperities for the contact of a rough surface and a plane. The numerical analysis are performed to calculate the functional relationship of the real contact area and real contact pressure versus the approaching ratio and surface adhesion. The results obtained from the numerical analysis are shown as follows: (1)For a given approaching ratio, the contact number of the plastically deformed asperities become larger when the rougher surface is encounted. (2)A power law relationship Ac~Lcn is proposed in this paper, and its exponent n approaches to unity. (3)For a given approaching ratio, the effect of surface adhesion is significant for a smooth surface having low surface roughness. (4)Under a given load applied on the plane, the contact load and the contact area are greater when the rough surface is smoother. In other words, the effect of surface adhesion should not be neglected for smooth and clean surfaces. Keyword: fractal rough surface, elastic-plastic contact, surface adhesion
Brückner, Julian Karl. "Adhäsionskräfte von Artikulationsgipsen an Typ 3 und 4 Modellgips. Eine in vitro Studie: Adhäsionskräfte von Artikulationsgipsen an Typ 3 und 4 Modellgips.Eine in vitro Studie." Doctoral thesis, 2014. https://ul.qucosa.de/id/qucosa%3A13310.
Повний текст джерелаSolomon, Christopher S. "Estimation and Control of Friction in Bulk Plastic Deformation Process." Thesis, 2018. http://etd.iisc.ac.in/handle/2005/4194.
Повний текст джерелаQualen, Lilly Hélène Jeanne. "Adhäsionskraft von Artikulationsgipsen an Typ-IV-Modellgips in Abhängigkeit makroskopischer Oberflächenvergrößerungselemente." Doctoral thesis, 2016. https://ul.qucosa.de/id/qucosa%3A16753.
Повний текст джерелаJhin, Minseok. "Crack Growth Rate and Crack Path in Adhesively Bonded Joints: Comparison of Creep, Fatigue and Fracture." Thesis, 2012. http://hdl.handle.net/1807/33256.
Повний текст джерелаMuthukumar, R. "Effect Of Material Non-Linearity Of Adherends On Fracture Behaviour Of Bimaterial Interface Cracks." Thesis, 2005. https://etd.iisc.ac.in/handle/2005/1470.
Повний текст джерелаMuthukumar, R. "Effect Of Material Non-Linearity Of Adherends On Fracture Behaviour Of Bimaterial Interface Cracks." Thesis, 2005. http://etd.iisc.ernet.in/handle/2005/1470.
Повний текст джерелаSommer, Guido Sebastian. "Mikromechanische Untersuchungen zur Faser-Matrix-Haftung in Faser-Kunststoff-Verbunden:: Einfluss von Härtungsdauer, Feuchtigkeit und Prüfparametern." Doctoral thesis, 2017. https://tud.qucosa.de/id/qucosa%3A31135.
Повний текст джерелаFor investigating fibre-matrix adhesion in fibre-polymer composites, macromechanical methods such as transverse tensile and three-point bending tests can be applied as well as micromechanical methods for which single-fibre model composites are used. The latter category of methods includes microbond, single-fibre pull-out (SFPO) and single-fibre fragmentation tests (SFFT). When applying these methods, it needs to be considered that their results can be affected by different influencing factors. In the present thesis, an extensive literature survey with a detailed overview of a larger number of influencing factors is conducted. Based on this overview, the factors curing time, moisture, free fibre length and test speed are acquired as objects of investigation of this thesis. Main results and conclusions of this work are summarised below. Curing time: Results from SFFT investigations on ceramic fibre/epoxy-specimens exhibit a degressive increase of fibre-matrix adhesion with curing time. This indicates that curing time affects SFFT and SFPO results differently due to different underlying principles (based on destructive and, respectively, constructive superposition of internal stresses and load-induced stresses). Moisture: SFPO specimens (carbon fibre/epoxy) are conditioned in humid (50 %rH, 23 °C) and dry climate (0 %rH, 23 °C) for one month prior to testing. The results show lower adhesion due to moisture. It is concluded that uncontrolled humidity, even in this limited climatic spectrum, needs to be considered as an important potential factor of influence (e.g. in partially climatised laboratories). Test parameters: Based on Hooke’s law, it is demonstrated for the SFPO that a) the free fibre length affects the maximum force and b) the effects of the free fibre length and the test speed on the maximum force are interrelated. Both is confirmed with results from SFPO investigations on glass fibre/epoxy-specimens. Furthermore, it is deduced from the above investigations that an increase in test speed from 0.01 µm/s to 0.1 µm/s is legitimate for reducing test duration – in the present case from 30 45 min to 6 8 min. In addition, the effect of erroneously determined input data on the calculation of the local interfacial shear strength is studied using conditions numbers (a measure for the propagation of error). With this, differentiated statements are generated.