Дисертації з теми "Additive Manufacturing (AM) techniques"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Additive Manufacturing (AM) techniques".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Schunemann, Esteban. "Paste deposition modelling : deconstructing the additive manufacturing process : development of novel multi-material tools and techniques for craft practitioners." Thesis, Brunel University, 2015. http://bura.brunel.ac.uk/handle/2438/13803.
Повний текст джерелаHasting, William. "Geometric Effects of Free-Floating Technique on Alloy 718 Parts Produced via Laser-Powder Bed Fusion." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1613751580039925.
Повний текст джерелаWhip, Bo Ryan. "Effect of Process Parameters on the Surface Roughness and Mechanical Performance of Additively Manufactured Alloy 718." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1526993831680976.
Повний текст джерелаMelpal, Gopalakrishna Ranjan. "Conformal Lattice Structures in Additive Manufacturing (AM)." University of Cincinnati / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1535382325233769.
Повний текст джерелаChandran, Ramya. "Optimization of Support Structures in Additive Manufacturing (AM) Processes." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1479819006942462.
Повний текст джерелаPaul, Ratnadeep. "Modeling and Optimization of Powder Based Additive Manufacturing (AM) Processes." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1378113813.
Повний текст джерелаAllavarapu, Santosh. "A New Additive Manufacturing (AM) File Format Using Bezier Patches." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1385114646.
Повний текст джерелаGhazizadeh, Ali, and Suraj Lakshminarasimhaiah. "Additive manufacturing and its impacts on manufacturing industries in the future concerning the sustainability of AM." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-56058.
Повний текст джерелаJeunehomme, Eric J. S. "Design of low cost biomimetic flexible robots using additive manufacturing techniques." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/122313.
Повний текст джерелаThesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2019
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 109-112).
In this thesis, I designed and fabricated robots leveraging additive manufacturing. This had two overarching purpose. One to make a testing apparatus that would allow the measurements of the influence of a flexible flapping foil onto a subsequent, in-line, foil with the optic of researching optimized propulsion solutions for under water vehicles. The second was to show that filament deposition modeling has advanced enough to produce bio-mimetic flexible robots of academic relevance that would allow, for a low price, the making of a number of experimental setup with specific measurements in mind. In order to reach those goals, two versions of a bio-mimetic archer fish of the genus Toxotes were modeled using various software. The models were modified to accept actuator assemblies and interface to the electronics and built using a modified hobby grade 3D printer.
by Eric J.S. Jeunehomme.
S.M. in Naval Architecture and Marine Engineering
S.M.
S.M.inNavalArchitectureandMarineEngineering Massachusetts Institute of Technology, Department of Mechanical Engineering
S.M. Massachusetts Institute of Technology, Department of Mechanical Engineering
Sauter, Barrett. "Ultra-light weight design through additive manufacturing." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-45160.
Повний текст джерелаStrong, Danielle B. "Analysis of AM Hub Locations for Hybrid Manufacturing in the United States." Youngstown State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1495202496133841.
Повний текст джерелаJohansson, Matilda, and Robin Sandberg. "How Additive Manufacturing can Support the Assembly System Design Process." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Industriell organisation och produktion, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-30887.
Повний текст джерелаSreedhar, Aldric, and C. L. Kaushik Gupta. "Pre-study on the use of additive manufacturing to produce low volume complex parts and its environmental sustainability." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-52800.
Повний текст джерелаPhilip, Ragnartz, and Axel Staffanson. "Improving the product development process with additive manufacturing." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-40344.
Повний текст джерелаWang, Zhiping. "Constructive generative design methods for qualified additive manufacturing." Thesis, Ecole centrale de Nantes, 2021. https://tel.archives-ouvertes.fr/tel-03670417.
Повний текст джерелаAdditive manufacturing (AM) technologies give more and more design freedom to designers and engi-neers to design and define highly complex geometries and material compositions. Due to a layer-by-layer processing, the constraints, methods, tools and processes of design in AM are different from that in traditional manufacturing processes. Traditional design methods and tools cannot meet the needs of design in AM. Therefore, a new re-search field, design for AM (DfAM), has emerged to serve this need. However, existing DfAM methods are either guidelines or pure computation-based, which have limited consideration of coupled constraints along the AM digital processing chain and are difficult to ensure manufactura-bility of design in AM. To obtain qualified design in AM, this research focuses on three typical existing problems in DfAM domain: Firstly, how to ensure manufacturability in (topology optimization) TO process? Secondly, how to design support structures with lightweight, easy-to-remove for post-processing and friendly heat-diffusion properties to ensure shape accuracy and improve surface roughness of printed parts? Finally, how to avoid accuracy loss in print-ing preparation of complex lattice structures and ensure their manufacturability in design?To solve the three identified problems, this research developed a set of new constructive genera-tive design methods: 1. CSG-based generative design method to ensure manufacturability in light-weight topology optimization; 2. Pattern-based constructive generative design method to optimize support structure design and 3. Toolpath-based inversed constructive design to directly ob-tain processing models of corresponding complex lattice or porous structures with qualified print-ing toolpaths. The three proposed methods can well embed AM process constraints, realize para-metric control and save computation cost in design process to obtain a set of candidate design solutions with ensured manufacturability. A set of comparison studies with existing DfAM meth-ods and a couple of experiment case studies in medical applications demonstrated the methods’ advantages. These constructive methods may have large application potential to be adopted as design and decision making tools for other industrial applications when qualified DfAM is required
Woods, Adam Xavier. "Exploring Combinatorial Libraries for Material Screening Techniques via Additive Manufacturing: Design, Fabrication, & Applications." University of Akron / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=akron1594772957272505.
Повний текст джерелаHamad, Aamir Hamed. "Additive Manufacturing Techniques to Enhance the Performance of Electronics Created on Flexible andRigid Substrates." Wright State University / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=wright1598253714624332.
Повний текст джерелаAl, Mortadi Noor. "Computer Aided Design/Aided Manufacture/Additive Manufacturing applications in the manufacture of dental appliances." Thesis, Cardiff Metropolitan University, 2014. http://hdl.handle.net/10369/6527.
Повний текст джерелаVaidya, Rohit R. "Image Processing (IP) Assisted Tools for Pre- and Post-Processing Operation in Additive Manufacturing (AM)." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1470757856.
Повний текст джерелаIngman, Richard. "ADAPTION OF A HEATSINK TO ADDITIVE MANUFACTURING. : INCLUDING A GUIDE TO INDUSTRIAL STARTUP OF AM." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-262655.
Повний текст джерелаDetta examensarbete har undersökt den nuvarande statusen hos additiv tillverkning (AM) vad gäller olika teknologier, hur långt implementeringen i industrin kommit och framtida hinder som måste lösas för vidare implementering. Som sekundärt mål för projektet har en existerande elektronikkylare designats om och förbättrats med hjälp av designfördelarna hos AM, och tillverkades sedan genom 3D-printning i aluminium (AlSi10Mg). Arbetet har resulterat i en sammanfattad ’roadmap’ med rekommendationer för vad Saab Surveillance i Järfälla bör göra inom AM den närmaste tiden, samt en ny kylare som framgångsrikt trycktestades upp till 30 bar. Genom simuleringar visades den uppnå samma tryckfall och klara samma vibrationer som den tidigare kylaren, samtidigt som den väger 20% mindre och har en 100% ökning av kylkanalens våta area vilket potentiellt innebär en dubblering av kylförmågan.
Karlsson, Mattias, and Axel Magnusson. "Wire and Arc Additive Manufacturing : Pre printing strategy for torque arm." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-79176.
Повний текст джерелаHayagrivan, Vishal. "Additive manufacturing : Optimization of process parameters for fused filament fabrication." Thesis, KTH, Lättkonstruktioner, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-238184.
Повний текст джерелаEtt hinder för att additiv tillverkning (AT), eller ”3D-printing”, ska få ett bredare genomslag är svårigheten att uppskatta effekterna av processparametrar på den tillverkade produktens mekaniska prestanda. Det komplexa förhållandet mellan geometri och processparametrar gör det opraktiskt och komplicerat att härleda analytiska uttryck för att förutsäga de mekaniska egenskaperna. Alternativet är att istället använda numeriska modeller. Huvudsyftet med denna avhandling har därför varit att utveckla en numerisk modell som kan användas för att förutsäga de mekaniska egenskaperna för detaljer tillverkade genom AT. AT-tekniken som avses är inriktad på Fused Filament Fabrication (FFF). En numerisk modell har utvecklats genom att återskapa FFF-byggprocessen i en simuleringsmiljö. Instruktioner (skriven i GCode) som används för att bygga en detalj genom FFF har här översatts till en numerisk FE-modell. Modellen används sen för att bestämma effekterna av processparametrar på styvheten och styrkan hos den tillverkade detaljen. I detta arbete har strukturstyvheten hos olika detaljer beräknats genom att utvärdera modellens svar för jämnt fördelade belastningsfall. Styrkan, vilket är starkt beroende på den tillverkade detaljens termiska historia, har inte utvärderats. Den utvecklade numeriska modellen kan dock fungera som underlag för implementering av modeller som beskriver relationen mellan termisk historia och styrka. Den utvecklade modellen är anpassad för optimering av FFF-parametrar då den omfattar effekterna av alla FFF-parametrar. En genetisk algoritm har använts i detta arbete för att optimera parametrarna med avseende på vikt för en given strukturstyvhet.
Brandemyr, Gabriella. "Powder bed additive manufacturing using waste products from LKAB's pelletization process : A pre-study." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-75421.
Повний текст джерелаAriadi, Yudhi. "Facilitating consumer involvement in design for additive manufacturing/3D printing products." Thesis, Loughborough University, 2016. https://dspace.lboro.ac.uk/2134/21763.
Повний текст джерелаCronskär, Marie. "The use of additive manufacturing in the custom design of orthopedic implants." Licentiate thesis, Mittuniversitetet, Institutionen för teknik och hållbar utveckling, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-14390.
Повний текст джерелаKoskenniemi, Isak. "Preparing parts for Wire and Arc Additive Manufacturing (WAAM) and net-shape machining." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-74296.
Повний текст джерелаLenner, Lukas. "Engine Redesign Utilizing 3D Sand Printing Techniques Resulting in Weight and Fuel Savings." Youngstown State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1472734710.
Повний текст джерелаBiancoli, Giacomo. "Additive manufacturing: ricerca sui principali fattori che influenzano il comportamento a fatica." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2017.
Знайти повний текст джерелаLerebours, Augustin. "Use of additive manufacturing techniques for the production of customized implants with complex geometry : application to reparative hand surgery." Thesis, Compiègne, 2019. http://www.theses.fr/2019COMP2531.
Повний текст джерелаOsteoarthritis is a pathology that causes the degeneration of joint surfaces. In the particular case of the trapezo-metacarpal joint, osteoarthritis irreversibly deforms the trapezium bone, causing loss of mobility and reduced grip strength coupled with pain at the base of the thumb. However, therapeutic solutions are not satisfactory with limited functional recovery resulting in a loss of quality of life for the patient. In the case of the hand, the personalization of implants seems to be relevant because of the great variability of the joint mechanical characteristics and the musculoskeletal specificities. This thesis work focuses on the methodology for creating a trapezio-metacarpal implant patient-matched, based on the potentialities of additive metal manufacturing technologies. More generally, it involves developing, analyzing and validating the steps involved in the manufacture of any complex geometric implant from medical imaging to implantation. The work initially focuses on identifying specific patient parameters in order to numerically "rejuvenate" the deformed bone in its pre-pathological stage to design the ideal implant and adapt the model to additive manufacturing (DfAM). Implant manufacturing and post-treatment are also studied from a biological (cytocompatibility, immune system response), mechanical (microstructure, friction property) and morphological (quantification of geometric deviations) point of view. The surgical implantation approach is addressed through various tests on cadavers to better integrate the benefits / risks for the patient. A study on the psychology of the patient suffering from rhizarthrosis and his expectations for a therapeutic solution concludes this manuscript. The results have led to 2 patents and the writing of 6 scientific articles
Palmer, Andrew. "The Design and Development of an Additive Fabrication Process and Material Selection Tool." Master's thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3635.
Повний текст джерелаM.S.
Department of Industrial Engineering and Management Systems
Engineering and Computer Science
Industrial Engineering MS
Swartz, Paul. "Evaluation of Tensile Properties for Selective Laser Melted 316L Stainless Steel and the Influence of Inherent Process Features." DigitalCommons@CalPoly, 2019. https://digitalcommons.calpoly.edu/theses/2024.
Повний текст джерелаAntonysamy, Alphons Anandaraj. "Microstructure, texture and mechanical property evolution during additive manufacturing of Ti6Al4V alloy for aerospace applications." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/microstructure-texture-and-mechanical-property-evolution-during-additive-manufacturing-of-ti6al4v-alloy-for-aerospace-applications(03c4d403-822a-4bfd-a0f8-ef49eb65e7a0).html.
Повний текст джерелаGustavsson, Bengt. "Effect of Beam Scan Length on Microstructure Characteristics of EBM Manufactured Alloy 718." Thesis, KTH, Materialvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-225416.
Повний текст джерелаGustafsson, Christopher. "Lead-time reduction and rapid prototyping of tools and fixtures, therefore I AM : A case study about additive manufacturing in the automotive industry." Thesis, Mälardalens högskola, Innovation och produktrealisering, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-44762.
Повний текст джерелаNakládalová, Tereza. "Konstrukční optimalizace výrobní linky využitím aditivní technologie SLS." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382472.
Повний текст джерелаDi, Sannio Christian. "Ricerca di tecniche e materiali innovativi per il settore aerospaziale: caratterizzazione meccanica e sviluppo di provini in cromo-cobalto prodotti in additive manufacturing." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2018.
Знайти повний текст джерелаBarsing, Jonas. "A Cost Breakdown and Production Uncertainty Analysis of Additive Manufacturing : A Study of Low-Volume Components Produced with Selective Laser Melting." Thesis, Blekinge Tekniska Högskola, Institutionen för industriell ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-16730.
Повний текст джерелаBakgrund: Additiv tillverkning har på senaste tiden fått slagkraft som en produktionsteknik för slutprodukter. Additiv tillverkning använder en lager på lager teknik för att bygga tre-dimensionella objekt. Denna teknik har många fördelar som skapar många nya produktionsmöjligheter. Syfte: Syftet med studien är att undersöka kostnadselement, kostnadsdrivare, fördelningen av kostnader och att utforska produktionsosäkerheter inom additiv tillverkning. De utforskade osäkerhetsparametrarna inom processen är sedan studerade för att se hur de påverkar den slutgiltiga produktkostnaden. Metod: Följande studie har använt kvalitativa datainsamlingsmetoder i form av intervjuer tillsammans med en förstudie och ett utvecklat känslighetsanalysverktyg för att identifiera kostnadsförändringar på grund av förändringar i osäkerhetsparametrar. Fem stycken intervjuer har genomförts med anställda på företaget som har relevant kunskap inom området. Resultat: Resultatet visar att produktkostnaden kan delas upp i två kategorier, materialkostnad och tillverkningskostnad. Dessa två kategorier består sedan av olika kostnadselement som driver kostnader. De utforskade produktions osäkerheterna inom processen består av två typer av osäkerheter beskriven i teorin. Den produktionsosäkerhetsparameter som har störst påverkan på produktens slutkostnad är SLM maskintiden som krävs för att bygga komponenten. Slutsatser: Att beakta produktionsosäkerheter i kostnadsuppskattningar är viktigt för att uppskattningarna ska vara tillförlitliga och korrekta. De tre studerade produktionsosäkerheterna som har störst påverkan på den slutgiltiga produktionskostnaden är årlig maskinanvändning, SLM maskintiden som krävs för att bygga komponenten och bemanningstiden för operationerna. Dessa tre osäkerhetsparametrar bör därför ha ett större fokus eftersom de har störts påverkan på slutresultatet.
Patibandla, Sivani. "Layer-to-Layer Physical Characteristics and Compression Behavior of 3D Printed Acrylonitrile Butadiene Styrene Metastructures Fabricated using Different Process Parameters." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1547231646016662.
Повний текст джерелаLe, Van-Thao. "Proposition d'une stratégie soutenable pour donner une nouvelle vie à une pièce en s’appuyant sur les techniques de fabrication additive." Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAI038/document.
Повний текст джерелаCurrently, materials collected from end-of-life (EoL) products are recycled into raw material for reusing in a new production cycle. However, energy consumptions of recycling sectors remain important. The added values and energy used in the manufacture of original parts are also lost during the material recycling process. Nowadays, additive manufacturing techniques are sufficiently efficient and allow the manufacture of products with a material compatible with the use. Taking into account the performances of these techniques in a sustainable strategy can open the ways to modify parts and reuse them directly without returning to the raw material level. This thesis aims to develop a sustainable strategy, which allows giving a new life to an EoL part (or an existing part) by transforming it directly into a new part intended for another product. In order to develop such a strategy, the works of the thesis aims to solve the following scientific issues : the first scientific issue is related to the technological feasibility : is it possible to deposit material on an existing part using additive manufacturing technologies to obtain the new part with good material health ? This question is solved by carrying out an experimental study on the observation of microstructures and mechanical properties of the samples, which are manufactured by adding new features into an existing part in EBM. The second scientific issue is related to the study of the complete manufacturing chain from a technological point of view. How to design the process planning for additive and subtractive manufacturing combination to manufacture the expected part from the existing part ? To solve this question, a methodology to design the process planning for combining these manufacturing processes has been proposed based on the concept of additive manufacturing and machining features.The third scientific issue is linked to the sustainability and does the new strategy have advantages in comparison to the conventional strategy in terms of sustainability ? An approach based on the Life Cycle Assessment (LCA) method has also been developed to assess environmental impacts. The criteria for qualifying the domain of the proposed strategy vis-a-vis the conventional strategy were also identified
Westbeld, Julius. "Investigation of support structures of a polymer powder bed fusion process by use of Design of Experiment (DoE)." Thesis, KTH, Lättkonstruktioner, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-243867.
Повний текст джерелаI detta examensarbete undersöks stödstrukturer för en polymer-pulverbaserad process kallad XXXXXXXX. Dessa strukturer är väsentliga för de flesta aditiv tillverkning. Med hjälp av metoden "Design of Experiment" (DoE) undersöks effekten av flera faktorer på fem industriellt viktiga egenskaper för stödstrukturer. DoE beskriver både planeringen och analysen av experiment. Experimenten planeras i en fraktionerad faktoriell 211-5 design med 64 provexemplar vilket resulterar i en upplösning av IV. Dataanalysen genomförs med hjälp av ANOVA-metoden, med vilken signifikansen av effekter och interaktionseffekter kan undersökas.
Sarlak, Shannon. "Möjligheter för produktion med additiv tillverkning : - En fallstudie." Thesis, Högskolan i Skövde, Institutionen för handel och företagande, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-17739.
Повний текст джерелаBakgrund: Additiv tillverkning är en tillverkningsprocess som har på de senare åren börjat användas avsevärt det senaste 30 åren, inom industribranschen. Genom att addera material lager-för-lager bildas ett objekt och denna metod kallas för 3D-printing. Trots fördelen med att kunna tillverka ett objekt komplett utan att behöva montera ihop delar som i traditionell tillverkning, finns det många begränsningar med additiv tillverkning. Finns det fler möjligheter än svårigheter med additiv tillverkning eller är tillverkningsprocessen för avancerat för att ta över den traditionella tillverkningsprocessen helt? Syfte: Rapportens syfte är att öka förståelsen för möjligheter och svårigheter med additiva tillverkningsprocesser samt i vilken kontext det är lämpligt att använda. Vilka faktorer gör det mer eller mindre lämpligt med additiv tillverkning. Genomförande: I studiens teoretiska referensram har en fallstudie utförts genom att samla in och bearbeta data från tidigare studier. Här utformas studiens teori med fokus på innebörden av additiv tillverkning, jämförelse mellan traditionell tillverkning samt additiv tillverkning enbart i TR, möjligheter och svårigheter med tillverkningsprocessen, logistiska aspekter som fokuserar på den leveransserviceelement som samspelas mellan företag och kunder samt att detta inkluderar kvalité problem som uppstår med AM, orderkvalificerare och ordervinnare som gör företagen unika samt lämplighet av material för olika additiva tillverkningsprocesser. I empirin hittas data och information från två berörda företag som använder sig av additiv tillverkning inom produktionsområden och hur de går tillväga för att uppnå konkurrensfördelar. I analysen sammanställs den teoretiska referensram som utformats med hjälp av data från tidigare studier om additiv tillverkning, tillsammans med empirin som tagits fram med hjälp av dessa två berörda företag. Genom ett frågeställningsformulär och en utformad enkätstudie som gavs till respektive företag, kunde en informationsrik litteraturstudie utföras. Slutsats: Denna fallstudie visar likaså majoriteten av tidigare studier som berör additiv tillverkning, samma slutsats. Slutsatsen visar att additiv tillverkning leder till faktorer såsom kostnadsreducering gällande produktion, minskad bundet kapital, förkortade ledtider, färre transportsträckor, mer miljövänligt, skapa komplexa geometrier som är svårt att skapa på traditionellt vis. Det finns även skillnader mellan företagens valda AM-processer då företagen använder sig av olika tillverkningsprocesser och olika 3D-printer samt material. Materialutbudet är större hos Företag A som använder sig av plaster än hos Rise Swecast AB som använder sig av kvartssand vilket används inom metalltillverkning. Lämpligheten för additiv tillverkning passar mer vid uppbyggnad av komplexa geometrier, tillverkning av låga produktionsvolymer. Men lämpar sig mindre vid stora produktionsvolymer, begränsning vid materialval av olika AM-processer samt vid tillverkning av stora objekt. Det fanns även kvalitetsproblem gällande utskrifter då det inte finns några återkopplingsverktyg, men detta kontrolleras vid varje utskrift för att undvika variationer mellan utskrifter och processer. Additiv tillverkning kommer i framtiden att ta alltmer plats inom industribranschen och kommer även eventuellt att ersätta andra processer inom den traditionella tillverkningen just för att den bidrar med både med lönsamhet för företag samt kunder genom decentralisering, det vill säga att man inte behöver vara långt ifrån kunden samtidigt som man inte behöver investera i en hel fabrik.
Costa, Neto Inácio. "Elaboração de um mapeamento de boas práticas de fabricação para manufatura aditiva no laboratório de tecnologias 3D do núcleo de tecnologias estratégicas em saúde da UEPB." Universidade Estadual da Paraíba, 2017. http://tede.bc.uepb.edu.br/jspui/handle/tede/3074.
Повний текст джерелаApproved for entry into archive by Secta BC (secta.csu.bc@uepb.edu.br) on 2018-06-05T11:34:00Z (GMT) No. of bitstreams: 1 PDF - Inácio Costa Neto.pdf: 37706583 bytes, checksum: 2e6b9e65c5857fc8eda45146b4f4d0bb (MD5)
Made available in DSpace on 2018-06-05T11:34:00Z (GMT). No. of bitstreams: 1 PDF - Inácio Costa Neto.pdf: 37706583 bytes, checksum: 2e6b9e65c5857fc8eda45146b4f4d0bb (MD5) Previous issue date: 2017-04-17
This work seeks to perform a mapping of the production process for Good Manufacturing Practices in Additive Manufacturing in the Laboratory of Three Dimensional Technologies of the Nucleus of Technology for Health of the State University of Paraíba based on chapter five of RDC 16/13, in order to Possible future preparation of a manual of good manufacturing practices of this laboratory. This is a theoretical work in order to guarantee methodologies to extract the maximum quality of the process in question, aiming to provide guarantees of reliability, reproducibility and predictability of the biomodels produced, through standards, manuals, methods and resolutions when manufacturing medical products Such as surgical guides, temporary or permanent prostheses and orthoses. This work is justified on the assumption that biomodels are already being manufactured, but that they do not follow the necessary method in order to optimize the manufacturing process, thus spending too much time and financial resources. With this, it was possible to guarantee that the process is carried out following a layout for the laboratory that will facilitate the manufacture of the biomodel, and the creation of a flow chart proper to good manufacturing practices, allowing each agent to have its own function.
Este trabalho busca realizar um mapeamento do processo de produção para as Boas Práticas de Fabricação em Manufatura Aditiva no Laboratório de Tecnologias Tridimensionais do Núcleo de Tecnologia para Saúde da Universidade Estadual da Paraíba baseando-se no capítulo cinco da RDC 16/13, a fim de possibilitar a futura elaboração de um manual de boas práticas de fabricação deste laboratório. Trata-se e um trabalho teórico a afim de garantir metodologias que permitam extrair a máxima qualidade do processo em questão, objetivando proporcionar garantias de fidedignidade, reprodutibilidade e previsibilidade dos biomodelos produzidos, por meio de normas, manuais, métodos e resoluções ao fabricar produtos médicos específicos como guias cirúrgicos, próteses provisórias ou permanentes e órteses. Justifica -se esse trabalho a partir do pressuposto que já existem biomodelos sendo fabricados, mas que não seguem o método necessário a fim de avalizar a fabricação de maneira otimizada, gastando assim tempo e recursos financeiros em demasia. Com isso, foi possível garantir que o processo seja realizado seguindo um layout para o laboratório que facilitará a manufatura do biomodelo, e a criação de um fluxograma próprio para as boas práticas de fabricação, permitindo que cada agente tenha sua própria função.
Tamburrini, Simone. "Produzione e caratterizzazione di componenti in WC-Co mediante selective laser melting." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017.
Знайти повний текст джерелаParasa, Sairaj, and Mohammed Abujan Rehman Basha. "Adoption of Additive Manufacturing in the Medical Industry within Sweden : Stakeholder analysis in the process of adoption of AM in the medical industry and their influence on each other." Thesis, Uppsala universitet, Institutionen för samhällsbyggnad och industriell teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-448050.
Повний текст джерелаDesai, Prathamesh. "Tribosurface Interactions involving Particulate Media with DEM-calibrated Properties: Experiments and Modeling." Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/1123.
Повний текст джерелаDoan, Van Tu. "Modèles réduits pour des analyses paramètriques du flambement de structures : application à la fabrication additive." Thesis, Valenciennes, 2018. http://www.theses.fr/2018VALE0017/document.
Повний текст джерелаThe development of additive manufacturing allows structures with highly complex shapes to be produced. Complex lattice shapes are particularly interesting in the context of lightweight structures. However, although the use of this technology is growing in numerous engineering domains, this one is not enough matured and the correlations between the experimental data and deterministic simulations are not obvious. To take into account observed variations of behavior, multiparametric approaches are nowadays efficient solutions to tend to robust and reliable designs. The aim of this thesis is to integrate material and geometric uncertainty, experimentally quantified, in buckling analyses. To achieve this objective, different surrogate models, based on regression and correlation techniques as well as different reduced order models have been first evaluated to reduce the prohibitive computational time. The selected projections rely on modes calculated either from Proper Orthogonal Decomposition, from homotopy developments or from Taylor series expansion. Second, the proposed mathematical model is integrated in fuzzy and probabilistic analyses to estimate the evolution of the critical buckling load for lattice structures
Taddei, Francesco. "Influence of pre-cure stage upon exothermic overshoot and defects from deposition of continuous CFRP tow in AM." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/24994/.
Повний текст джерелаNeri, Marco. "Stylistic Design Engineering (SDE) applicato ad una berlina innovativa." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/21979/.
Повний текст джерелаSvensson, Fredrik, and Sebastian Wåhlstedt. "Metodutveckling av Additivt Tillverkade (AT) produkter med efterbearbetning i CNC styrda maskiner med enkel identifiering av nollpunkt." Thesis, Örebro universitet, Institutionen för naturvetenskap och teknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-51789.
Повний текст джерелаThis thesis has been carried out in Karlskoga at the two companies, Lasertech LSH AB and PartnerTech Karlskoga AB, where the assignment consisted of using a methodological development to find a general approach that can be used to simplify the processing of an additive manufactured (AM) part. The challenge is to rig and calibrate a detail in a CNC machine that is nearly finished that lacks obvious faces to rig and calibrate the part in the machine. The aim of the work is to find a general method that can be used to resolve these difficulties, leading to a safer and more efficient manufacturing. Parallel to the solution of the problem, a case study will also be done where both companies have a product that will be additive manufactured (AM) and processed in the CNC machine. The problems were clarified by using a functional-medium-trees (funktionsmedelträd) and solutions were developed using the concept generation to get as many good solutions as possible. By developing these concepts and the ability to combine these with each other a method that solves the problems with the rigging and calibration was created and proved to be useful in the case study. We see these concepts as general and a good solutions to the problems above. Further work and training will be required to further test the methods and increase knowledge about AM production to facilitate the manufacturing process.
Pooladvand, Koohyar. "Multifunctional Testing Artifacts for Evaluation of 3D Printed Components by Fused Deposition Modeling." Digital WPI, 2019. https://digitalcommons.wpi.edu/etd-dissertations/568.
Повний текст джерела