Дисертації з теми "ACV : analyse du cycle de vie"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "ACV : analyse du cycle de vie".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Firica, Andreea Maria. "Analyse environnementale de systèmes de cogénération : utilisation de la méthodologie Analyse de Cycle de Vie (ACV)." Lyon, INSA, 1999. http://www.theses.fr/1999ISAL0101.
Повний текст джерелаThe cogeneration systems are knowing an increase interest. Their development needs a global evaluation of the environmental impact of the fuel - co generation system. The present work adapts and uses the methodology of the Life Cycle Assessment (LCA) to realize this evaluation, having like a but to create a help instrument for taking decisions of choosing the energetically installations. We have elaborated an EXCEL calculation model, which permits the environment quantification impacts and is also adaptable at the numerical dates which are characteristic for all the concrete situations. The results are presented like ecoprofiles and we have developed the global analyze evaluation using the ELECTRA IS multicriteria method which means that the software was necessary to be created. For the numerical application different cogeneration systems configurations has been used, having a unique but, the method validation
Herbert, Anne-Sophie. "Analyse de mix électriques pour la détermination d'inventaires électricité pour ACV conséquentielle." Phd thesis, Toulouse, INPT, 2018. http://oatao.univ-toulouse.fr/19906/7/Herbert_AnneSophie.pdf.
Повний текст джерелаFougani, Malika. "Analyse du cycle de vie des boues de forage pétrolier : caractérisation des émissions toxiques en milieu aride." Strasbourg, 2009. http://www.theses.fr/2009STRA6122.
Повний текст джерелаPicherit, Marie-Lou. "Evaluation environnementale du véhicule électrique : méthodologies et application." Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2010. http://tel.archives-ouvertes.fr/tel-00666955.
Повний текст джерелаMarchand, Mathilde. "Considération de la différenciation spatiale dans l'évaluation des impacts environnementaux locaux au moyen de l'Analyse du Cycle de Vie (ACV) : application à la gestion des déchets ménagers." Phd thesis, Université Rennes 1, 2013. http://tel.archives-ouvertes.fr/tel-00866318.
Повний текст джерелаSaxcé, Marie de. "Méthodologie d'évaluation de l'impact environnemental des textiles par l'Analyse de Cycle de Vie." Thesis, Valenciennes, 2012. http://www.theses.fr/2012VALE0032/document.
Повний текст джерелаIn recent years, the European textile industry and textiles imports have had to comply with an increasing number of environmental policies. Emissions from industrial installations have been subject to EU-wide legislation for over 10 years: the IPPC Directive, the European Pollutant Release and Transfer Register (E-PRTR)… Since 2007, European textile producers also have to comply with a substantial number of obligations under REACH. Furthermore, in France environmental labelling for certain convenience goods (including textile products) might become mandatory in 2020. In parallel, national awareness appeared on the necessity of designing consumer products with limited use of natural resources and decreased the environmental impacts. Eco-design involves the implementation of new materials and new processes. Life Cycle Assessment, LCA, is a tool that enables the assessment of environmental impacts. This thesis was initiated by Bureau Veritas CODDE Company and the GEMTEX laboratory, following on the identification of a significant need for the development of LCA data and methods in the textile sector. This is because the existing methods and tools are not suitable for the environmental impact assessment of textile products since the textile sector presents specific constraining characteristics. These tools should enable designers, manufacturers and retailers to perform LCA on their products
Nguyen, Thi Tuyet Hanh. "Analyse de cycle de vie de la production bovine : exploration de pratiques et de changements de système pour réduire les impacts environnementaux." Phd thesis, Université Blaise Pascal - Clermont-Ferrand II, 2012. http://tel.archives-ouvertes.fr/tel-00844398.
Повний текст джерелаAbdou, Khaled. "Evaluation des impacts environnementaux du chalutage de fond et de l'aquaculture en Tunisie : approche comparative par les Analyses de Cycle Vie (ACV)." Thesis, Brest, 2017. http://www.theses.fr/2017BRES0141/document.
Повний текст джерелаThe main goal of ecology is to place human activities within a framework of sustainable development by enhancing their economic benefits, their social attractiveness and their environmental performances. Ecosystems that support fisheries and aquaculture are subject to several alterations of significant relevance to their functioning and to their abilities to provide goods and services. Therefore, the long-term sustainability of fishing and aquaculture is a major concern from an environmental and ecological viewpoint. Both activities carry risks of negative environmental impacts because of its close relation with the immediate environment. To better understand environmental impacts and ensure the sustainability of fishing and aquaculture, it is necessary to develop an integrative sciencebased approach to impact assessment. Life Cycle Assessment (LCA) has emerged as a robust method to estimate potential environmental impacts associated with a product. It allows the assessment of environmental impacts “from cradle to grave”, taking into account all stages of a product’s life. This thesis focuses on the adaptation of LCA to demersal trawling and aquaculture in Tunisia. The goal is to explore how LCA improves the environmental evaluation of seafood production systems and how it helps to better understand their links with the environment. Results revealed that rearing practices and fish feed were the greatest contributors to the impacts studied due to the production of fish meal and oil and the low efficiency of feed use. The study also showed that impact intensity of demersal trawling was proportional to the amount of fuel consumed. LCA is a valuable tool for assessing how to improve environmental sustainability of demersal trawling and aquaculture
Abdou, Khaled. "Evaluation des impacts environnementaux du chalutage de fond et de l'aquaculture en Tunisie : approche comparative par les Analyses de Cycle Vie (ACV)." Electronic Thesis or Diss., Brest, 2017. http://www.theses.fr/2017BRES0141.
Повний текст джерелаThe main goal of ecology is to place human activities within a framework of sustainable development by enhancing their economic benefits, their social attractiveness and their environmental performances. Ecosystems that support fisheries and aquaculture are subject to several alterations of significant relevance to their functioning and to their abilities to provide goods and services. Therefore, the long-term sustainability of fishing and aquaculture is a major concern from an environmental and ecological viewpoint. Both activities carry risks of negative environmental impacts because of its close relation with the immediate environment. To better understand environmental impacts and ensure the sustainability of fishing and aquaculture, it is necessary to develop an integrative sciencebased approach to impact assessment. Life Cycle Assessment (LCA) has emerged as a robust method to estimate potential environmental impacts associated with a product. It allows the assessment of environmental impacts “from cradle to grave”, taking into account all stages of a product’s life. This thesis focuses on the adaptation of LCA to demersal trawling and aquaculture in Tunisia. The goal is to explore how LCA improves the environmental evaluation of seafood production systems and how it helps to better understand their links with the environment. Results revealed that rearing practices and fish feed were the greatest contributors to the impacts studied due to the production of fish meal and oil and the low efficiency of feed use. The study also showed that impact intensity of demersal trawling was proportional to the amount of fuel consumed. LCA is a valuable tool for assessing how to improve environmental sustainability of demersal trawling and aquaculture
Morales, Mendoza Luis Fernando. "Écoconception de procédés : approche systémique couplant modélisation globale, analyse du cycle de vie et optimisation multiobjectif." Thesis, Toulouse, INPT, 2013. http://www.theses.fr/2013INPT0106/document.
Повний текст джерелаThe objective of this work is to propose an integrated and generic framework for eco-design coupling traditional modelling and flowsheeting simulation tools (HYSYS, COCO, ProSimPlus and Ariane), Life Cycle Assessment, multi-objective optimization based on Genetic Algorithms and multiple criteria decision-making methods MCDM (Multiple Choice Decision Making, such as ELECTRE, PROMETHEE, M-TOPSIS) that generalizes, automates and optimizes the evaluation of the environmental criteria at earlier design stage. The approach consists of three main stages. The first two steps correspond respectively to process inventory analysis based on mass and energy balances and impact assessment phases of LCA methodology. Specific attention is paid to the main issues that can be encountered with database and impact assessment i.e. incomplete or missing information, or approximate information that does not match exactly the real situation that may introduce a bias in the environmental impact estimation. A process simulation tool dedicated to production utilities, Ariane, ProSim SA is used to fill environmental database gap, by the design of specific energy sub modules, so that the life cycle energy related emissions for any given process can be computed. The third stage of the methodology is based on the interaction of the previous steps with process simulation for environmental impact assessment and cost estimation through a computational framework. The use of multi-objective optimization methods generally leads to a set of efficient solutions, the so-called Pareto front. The next step consists in identifying the best ones through MCDM methods. The approach is applied to two processes operating in continuous mode. The capabilities of the methodology are highlighted through these case studies (benzene production by HDA process and biodiesel production from vegetable oils). A multi-level assessment for multi-objective optimization is implemented for both cases, the explored pathways depending on the analysis and antagonist behaviour of the criteria
Garcia, Julien. "Développement d'une méthode d'évaluation de la performance environnementale des innovations incrémentales." Thesis, Châtenay-Malabry, Ecole centrale de Paris, 2015. http://www.theses.fr/2015ECAP0004/document.
Повний текст джерелаSustainable development is the conceptualization of transition imposed from human society towards a sustainableway of development for the world to find a solution to the crisis of the Environment. In this regard, ecodesign isone of the solutions that the industrial and business world proposes to implement. It consists of taking into accountthe environmental impacts throughout the life cycle of a product (good or service) in the design of it. Integratingthe Environment dimension raises a triple complexity: (i) the one related to the multi-criteria nature of theEnvironment dimension, (ii) the one related to understanding the Environment dimension by actors designingproducts who may resist and be a barrier to successful integration, and (iii) the one related to process design andinnovation of a product, especially in the case of complex products. But despite the multitude of ecodesign toolsthat has been developed, few research topics are interested in taking into account both technical and organizationalaspects, while integrating environment in the innovation phase of a complex product. Therefore this thesis aims toexperiment, by a car manufacturer, an integration strategy of the environmental evaluation of incrementalinnovations, named E3PICS (Methodology of an Evolutive integration of the Evaluation of the EnvironmentalPerformances of Innovative Complex Sub-systems). Framed by constraints on the technical and organizationalconstraints, E3PICS strategy employs a progressive approach to integrate a scalable ecodesign repository inadvanced process engineering of innovative features that are connected to development projects vehicles. The firststep is the iterative design of the scalable ecodesign repository with the ecodesign team (in the EnvironmentDepartment) and innovation leaders, allowing cross learning. The second step is to accompany all the innovationleaders in the systematic use of the ecodesign repository. The third step is to develop an analytical tool for assessingthe impact of innovations on the recycling end of life vehicles. It requires the creation of models of vehicles tobypass the lack of data on the complete system under design and project impact. The fourth and final step is thedevelopment of a second analytical tool for assessing the impact of innovations on environmental performanceover the life cycle of vehicles. Similarly, the tool requires a method of developing environmental models ofvehicles; however, for environmental impacts calculated on the life cycle, unlike recyclability which is calculatedon the vehicle end of life, these models are based on the treatment by hierarchical clustering of vehicle life cycleassessment results . The experiments were performed at PSA Peugeot Citroen. The E3PICS strategy has helped tointegrate the processes of innovation using the eco-design repository and systematize its use in the context of asustainable continuous improvement of vehicle manufacturer
Padey, Pierryves. "Modèles simplifiés d’Analyse de Cycle de Vie : cadre méthodologique et applications aux filières de conversion d’énergie." Thesis, Paris, ENMP, 2013. http://www.theses.fr/2013ENMP0083/document.
Повний текст джерелаThe energy transition debate is a key issue for today and the coming years. One of the challenges is to limit the environmental impacts of electricity production. Decision support tools, sufficiently accurate, simple to use, accounting for environmental aspects and favoring future energetic choices, must be implemented. However, the environmental assessment of the energy pathways is complex, and it means considering a two levels characterization. The “energy pathway” is the 1st level and corresponds to its environmental distribution, to compare overall pathways. The “system pathway” is the 2nd level and compares environmental impacts of systems within each pathway. We have devised a generic methodology covering both necessary characterization levels by estimating the energy pathways environmental profiles while allowing a simple comparison of its systems environmental impacts. This methodology is based on the definition of a parameterized Life Cycle Assessment model and considers, through a Global Sensitivity Analysis, the environmental impacts of a large sample of systems representative of an energy pathway. As a second step, this methodology defines simplified models based on few key parameters identified as inducing the largest variability in the energy pathway environmental impacts. These models assess in a simple way the systems environmental impacts, avoiding any complex LCAs. This reduction methodology has been applied to the onshore wind power energy pathway in Europe and the photovoltaic energy pathway in France
Shimako, Allan. "Contribution to the development of a dynamic Life Cycle Assessment method." Thesis, Toulouse, INSA, 2017. http://www.theses.fr/2017ISAT0014/document.
Повний текст джерелаLife Cycle Assessment (LCA) is a widely used method for the environmental evaluation of an anthropogenic system. However, LCA scholars pointed out the lack of a temporal dimension as a limitation. The processes of technosphere are dynamic which leads to a time dependent life cycle inventory (LCI). Environmental mechanisms involved in impact developments have distinct dynamic behaviors determining specific temporal occurrence. However, the current life cycle impact assessment (LCIA) methods consider arbitrarily fixed time horizons and/or steady state conditions. The objective of this thesis is to contribute to the development of an operational methodology and adapted tools for the consideration of time dependency in LCA, with emphasis on the development of an integrated modelling solution for both the life cycle inventory and the life cycle impact assessment phases. The first contribution of this thesis concerns the development of a temporal data base, leaning against ecoinvent data base, in which temporal parameters have been attributed to the data sets. Dynamic climate change and toxicity impacts were developed by adapting available models and were implemented in a homemade computational tool. The modelling approach takes into account the noisy nature of substance emissions in function of time as calculated by DyPLCA temporal LCI model
Francois, Cyrille. "Évaluation environnementale stratégique de la mobilité quotidienne des personnes d’une aire urbaine : couplage entre Modèle Transport-Urbanisme et Analyse de Cycle de Vie." Thesis, Lyon, 2019. http://www.theses.fr/2019LYSET002/document.
Повний текст джерелаBy considering social, spatial and technological dimensions of people’s daily mobility, this thesis aims to develop an original environmental assessment method. In the recent years, passenger travel, as well as freight transportation, have grown significantly. Car is now the predominant mode of passenger transport and its impacts on environment, land-use planning, lifestyle and economy are well documented and at the centre of heated academic and political debates. The environmental assessment of peoples’ daily mobility requires an integrated approach to account for the transport system, but also the urban system in which it operates. In order to achieve this, this thesis introduces a method coupling two tools developed in two distinct scientific fields - land-use planning and environmental sciences: on the one hand, Land-Use and Transport Interaction models (LUTI) and, on the other hand, Life Cycle Assessment (LCA) methods. Together, these tools can account for both technological processes involved in daily mobility, as well as interactions among stakeholders and territories. Throughout this thesis, the chosen evaluation framework is a strategic one, meaning that mobility is assessed through global and local environmental indicators on a large territory for medium and long-term alternatives. We describe the global context and the general approach in the first section of the thesis. The second part describes the SIMBAD-LCA method, which involves the integration of the LUTI model SIMBAD with a LCA method, in order to assess environmental impacts of the daily mobility of inhabitants in the Lyon urban area. The third part aims to illustrate the evaluation capability of the method in two steps. First, through a multicriteria assessment executed on disaggregated objects such as households and territories. Then, contrasted scenarios are built to assess broad and diversified alternatives. Finally, using the SIMBAD-LCA method, effects of technological, urban form and socio-economic parameters on environmental impacts associated with daily mobility are compared and discussed
Padey, Pierryves. "Modèles simplifiés d'Analyse de Cycle de Vie : cadre méthodologique et applications aux filières de conversion d'énergie." Phd thesis, Ecole Nationale Supérieure des Mines de Paris, 2013. http://pastel.archives-ouvertes.fr/pastel-01057847.
Повний текст джерелаLasvaux, Sébastien. "Étude d'un modèle simplifié pour l'analyse de cycle de vie des bâtiments." Phd thesis, Paris, ENMP, 2010. https://pastel.hal.science/pastel-00712043.
Повний текст джерелаEnergy and environmental aspects are more and more integrated in the design process of buildings. Life Cycle Assessment (LCA) is generally used to assess the environmental performance of buildings. This method uses to date a high number of data which can be a limiting aspect for its application. For instance, it can be difficult for some manufacturers to give life cycle inventory (LCI) gathering several hundreds of flows. In addition, the interpretation of the results with about ten environmental indicators can be complex for the building practitioners. In this context, the aim of this research is to study a simplified model for the LCA of buildings. A simplified life cycle inventory (LCI) database gathering building materials, products and processes is first developed. It is composed of data from the Ecoinvent and INIES database with the help of a homogeneous nomenclature. The use of statistical methods then enables to assess the relevance of simplification of the LCA model. Simplified life cycle impact assessment (LCIA) model are built between the LCI flows and the LCIA indicators. They enable previously to the applications using the database to identify the flows that are the most significant in the environmental impact of a building. The understanding of the consequences of the simplification of the LCA model and the statistical methods used in this work enable to better appreciate the reliability of simplified LCA applied to building products and buildings as a whole
Lasvaux, Sébastien. "Étude d'un modèle simplifié pour l'analyse de cycle de vie des bâtiments." Phd thesis, École Nationale Supérieure des Mines de Paris, 2010. http://pastel.archives-ouvertes.fr/pastel-00712043.
Повний текст джерелаNguyen, Thi Tuyet Hanh. "Analyse de cycle de vie de la production bovine : exploration de pratiques et de changements de système pour réduire les impacts environnementaux." Electronic Thesis or Diss., Clermont-Ferrand 2, 2012. http://www.theses.fr/2012CLF22328.
Повний текст джерелаThis thesis addresses the environmental impacts of cattle production systems. The first objective of this thesis was to analyse and compare the environmental impacts of suckler-beef and dairy production systems using attributional life cycle assessment (ALCA). Subsequently, the effects of mitigation practices for suckler-beef production systems were assessed. The second objective addressed methodology development by exploring possible consequences due to an increase in preference for grass-based milk using consequential LCA (CLCA).For a suckler-beef production system, enteric methane fermentation was the main contributor to the climate change impact, and grassland production contributed most to other impacts (cumulative energy demand, eutrophication, acidification and land occupation). The suckler cow-calf herd substantially contributed to the impacts of the suckler-beef system. The most effective mitigation practice for the suckler-beef production system was decreasing calving age from 3 to 2 years. The use of lipids rich in omega-3 fatty acids in ruminant diets did not substantially affect the impacts of the suckler-beef production system. Simultaneous application of several compatible practices can substantially mitigate the impacts of the suckler-beef production system. The application of certain practices (e.g. reducing ungrazed grass losses, fattening heifers not used for replacement and reducing calving age) reduced land occupation. Alternative uses for the “released land”, e.g. the introduction of forest to sequester C into biomass, seems promising. For dairy production systems, the assessment focused on a grass-based vs. maize-silage-based system, dual-purpose breed (Normande) vs. specialised breed (Holstein) and the effect of increasing milk yield per cow, using the ALCA approach. Independent of co-product handling methods, the impacts per kg of milk were lower with the maize-silage-based system and with Holstein cows (except for eutrophication). Increasing milk yield per cow by increasing feed energy intake and applying more intensive management (first calving at 2 years) decreased the impacts of milk and its beef co-product. The consequences of converting a maize-silage-based to a grass-based dairy farm in France to meet the increased domestic preference for grass-based milk were assessed using the CLCA approach. This farm conversion caused land-use change outside the dairy farm and thus substantially increased the impacts of the whole production system and the milk it produced
Garcia, Julien. "Développement d'une méthode d'évaluation de la performance environnementale des innovations incrémentales." Electronic Thesis or Diss., Châtenay-Malabry, Ecole centrale de Paris, 2015. http://www.theses.fr/2015ECAP0004.
Повний текст джерелаSustainable development is the conceptualization of transition imposed from human society towards a sustainableway of development for the world to find a solution to the crisis of the Environment. In this regard, ecodesign isone of the solutions that the industrial and business world proposes to implement. It consists of taking into accountthe environmental impacts throughout the life cycle of a product (good or service) in the design of it. Integratingthe Environment dimension raises a triple complexity: (i) the one related to the multi-criteria nature of theEnvironment dimension, (ii) the one related to understanding the Environment dimension by actors designingproducts who may resist and be a barrier to successful integration, and (iii) the one related to process design andinnovation of a product, especially in the case of complex products. But despite the multitude of ecodesign toolsthat has been developed, few research topics are interested in taking into account both technical and organizationalaspects, while integrating environment in the innovation phase of a complex product. Therefore this thesis aims toexperiment, by a car manufacturer, an integration strategy of the environmental evaluation of incrementalinnovations, named E3PICS (Methodology of an Evolutive integration of the Evaluation of the EnvironmentalPerformances of Innovative Complex Sub-systems). Framed by constraints on the technical and organizationalconstraints, E3PICS strategy employs a progressive approach to integrate a scalable ecodesign repository inadvanced process engineering of innovative features that are connected to development projects vehicles. The firststep is the iterative design of the scalable ecodesign repository with the ecodesign team (in the EnvironmentDepartment) and innovation leaders, allowing cross learning. The second step is to accompany all the innovationleaders in the systematic use of the ecodesign repository. The third step is to develop an analytical tool for assessingthe impact of innovations on the recycling end of life vehicles. It requires the creation of models of vehicles tobypass the lack of data on the complete system under design and project impact. The fourth and final step is thedevelopment of a second analytical tool for assessing the impact of innovations on environmental performanceover the life cycle of vehicles. Similarly, the tool requires a method of developing environmental models ofvehicles; however, for environmental impacts calculated on the life cycle, unlike recyclability which is calculatedon the vehicle end of life, these models are based on the treatment by hierarchical clustering of vehicle life cycleassessment results . The experiments were performed at PSA Peugeot Citroen. The E3PICS strategy has helped tointegrate the processes of innovation using the eco-design repository and systematize its use in the context of asustainable continuous improvement of vehicle manufacturer
Francois, Cyrille. "Évaluation environnementale stratégique de la mobilité quotidienne des personnes d’une aire urbaine : couplage entre Modèle Transport-Urbanisme et Analyse de Cycle de Vie." Electronic Thesis or Diss., Lyon, 2019. http://www.theses.fr/2019LYSET002.
Повний текст джерелаBy considering social, spatial and technological dimensions of people’s daily mobility, this thesis aims to develop an original environmental assessment method. In the recent years, passenger travel, as well as freight transportation, have grown significantly. Car is now the predominant mode of passenger transport and its impacts on environment, land-use planning, lifestyle and economy are well documented and at the centre of heated academic and political debates. The environmental assessment of peoples’ daily mobility requires an integrated approach to account for the transport system, but also the urban system in which it operates. In order to achieve this, this thesis introduces a method coupling two tools developed in two distinct scientific fields - land-use planning and environmental sciences: on the one hand, Land-Use and Transport Interaction models (LUTI) and, on the other hand, Life Cycle Assessment (LCA) methods. Together, these tools can account for both technological processes involved in daily mobility, as well as interactions among stakeholders and territories. Throughout this thesis, the chosen evaluation framework is a strategic one, meaning that mobility is assessed through global and local environmental indicators on a large territory for medium and long-term alternatives. We describe the global context and the general approach in the first section of the thesis. The second part describes the SIMBAD-LCA method, which involves the integration of the LUTI model SIMBAD with a LCA method, in order to assess environmental impacts of the daily mobility of inhabitants in the Lyon urban area. The third part aims to illustrate the evaluation capability of the method in two steps. First, through a multicriteria assessment executed on disaggregated objects such as households and territories. Then, contrasted scenarios are built to assess broad and diversified alternatives. Finally, using the SIMBAD-LCA method, effects of technological, urban form and socio-economic parameters on environmental impacts associated with daily mobility are compared and discussed
Loiseau, Eléonore. "Élaboration d’une démarche d’évaluation environnementale d’un territoire basée sur le cadre méthodologique de l’Analyse du Cycle de Vie (ACV) : application au territoire du Bassin de Thau." Thesis, Montpellier, SupAgro, 2014. http://www.theses.fr/2014NSAM0008/document.
Повний текст джерелаSince the implementation of the European directive (EC/2001/42) on strategic environmental assessment, an ex ante evaluation is required for all plans and programmes related to land planning issues. However, there is no uniform methodology available to conduct such assessment. In order to tackle this issue, the task accomplished during this PhD is the development of an environmental assessment method of a territory as a whole. The first step has been to identify and analyze different tools and methods used to perform the environmental assessment of territories in order to compare them. The results show that Life Cycle Assessment (LCA) is the most promising tool even if it is a “product-oriented” tool (i.e. designed to assess the environmental impacts of good or service that meets the requirements of a given function). Thus, our main contribution was to adapt the LCA framework to territorial systems and create a new approach, called “territorial LCA”. Four major methodological bottlenecks have been identified and proposals have been made to overcome them, i.e., (i) functional unit definition, (ii) boundary selection, (iii) data collecting, and (iv) the refinement of the Life Cycle Impact Assessment phase in order to provide useful indicators for decision making in a local context. One of the main adaptations is the consideration of the territorial multifunctionality. The various functions provided by a territory are not an input of the studied system like in a conventional LCA (through the functional unit definition), but are now the results of an assessment method which provides two kinds of indicators, i.e. indicators of services provided by the territory (land use functions) and indicators of environmental impacts generated by the territory. The last step was to implement the territorial LCA framework on a case study, the territory of Bassin de Thau, located on the French mediterranean coast, in order to evaluate its value (assessment method that is transversal, multicriteria and global), its feasibility (regarding data collection) and its robustness (sensitivity to the environmental impact assessment method)
Acosta-Alba, Ivonne. "Quelles valeurs de référence pour l'analyse de la durabilité environnementale des systèmes de production animale ? Méthode de détermination et application aux exploitations laitières de Bretagne." Phd thesis, Agrocampus - Ecole nationale supérieure d'agronomie de rennes, 2010. http://tel.archives-ouvertes.fr/tel-00607707.
Повний текст джерелаPayen, Sandra. "Vers une prise en compte de l'eau en tant que ressource et vecteur de pollution dans les ACV de produits agricoles : Développement méthodologique et application à un système de culture pérenne." Thesis, Montpellier, 2015. http://www.theses.fr/2015MONTS119/document.
Повний текст джерелаIdentifying the environmental hot spots of agriculture is crucial in a context where humanity has to produce more food and pollute less. Life Cycle Assessment (LCA) is a powerful tool to evaluate the environmental impacts of agricultural systems, but is still fraught with shortcomings, notably for the evaluation of impacts of freshwater use and of salinisation of water and soil. The core complexity lies in the double status of water and soil resources in LCA which are both a resource and a compartment. The three questions answered by the thesis were: How to better assess the impacts associated with water and salts fluxes? What model should be developed for a relevant inventory of field water and salts fluxes? Is the developed model operational for an LCA study on a perennial crop? The first question was answered through a literature review on salinisation impacts in LCA. It revealed the main environmental mechanisms of salinisation, the factors involved, and discussed the soil and water status, notably through a consistent definition of the technosphere and ecosphere boundary. To answer the second question, a critical analysis of water inventory and agri-food LCA databases showed their inadequacy for the LCA-based ecodesign of cropping systems: they provide estimates of theoretical water consumed, rely on data and methods presenting limitations, and do not support the calculation of both consumptive and degradative water use impacts. For the LCA-based ecodesign of cropping systems, the inventory of water flows should be based on a model simulating evapotranspiration, deep percolation and runoff accounting for crop specificities, pedo-climatic conditions and agricultural managements. For herbaceous crops, the FAO Aquacrop model constitutes a relevant and operational model, but no dedicated model is available to-date for perennials. To fill this gap, a tailored and simple model, so called E.T., was elaborated for the inventory of field water and salt flows for annual and perennial crops. The model combines daily water and salts balances, accounting for soil, climate, agricultural practices and possible crop water and salinity stresses. A first testing of the E.T. model demonstrated its discriminating power for agricultural practices and its robustness. Its validity domain can be extended and its accuracy increased thanks to the recommendations provided. E.T. was also tested in the LCA of a Mandarin grown in Morocco. For most impact categories, electricity use for irrigation was the main contributor revealing a water-energy nexus. Water use had a major contribution to damages for all areas of protection. Overall, to further improve the assessment of impacts due to water use (including salinization impacts) we recommend using a more mechanistic and hydrological approach
Julio, Remi. "Développement d'une méthode d'évaluation multi-indicateurs des systèmes agro-industriels, basée sur la pensée cycle de vie, pour une éco-conception des procédés de production." Thesis, Toulouse, INPT, 2018. http://www.theses.fr/2018INPT0096/document.
Повний текст джерелаThe biorefinery concept, developed to face fossil resources dependence, aims to design a wide variety of products (biofuels, materials, chemicals ...) based on the development of renewable resources such as plant biomass. The establishment of biorefineries must be based on ecodesigned processes to optimize the environmental performance of the biomass processing chain. Nevertheless, eco-designing innovative processes can be complex due to multiple configurations and the lack of related specific and reliable data. Thereby, the aim of this research work is to develop a multi-indicator evaluation method for the eco-design of agro-industrial and biorefinery processes. The general approach is based on coupling Process Engineering and Life Cycle Assessment fields. Indeed, process modeling, based on mathematical or semi-empirical models (notably resulting from designs of experiments) and process simulation are applied to facilitate the life cycle inventory step by predicting detailed mass and energy balances. Then these data can be used to perform a prospective Life Cycle Assessment of the process. By iteration, it is possible perform data prediction and to test several operating conditions sets for the process, to enhance its environmental performance, by determining optimal operating conditions and by identifying the most environmentally friendly unit operations. The methodology and its associated tool have been tested on different biorefinery processes, involving various biomasses: micro-algae, wheat coproducts and wood
Powar, Ajinkya. "ACV et éco-conception dans le domaine de l'élimination des produits chimiques des déchets textiles pour le recyclage des textiles." Electronic Thesis or Diss., Université de Lille (2018-2021), 2021. http://www.theses.fr/2021LILUN040.
Повний текст джерелаThe textile industry is evolving rapidly, and is also constantly changing. It is constantly developing new techniques for the recycling of the textiles and further research is vital for the future needs. The capability to recycle a textile material is a step towards a more green and sustainable industry. However, there are various challenges and difficulties associated with the recycling of textiles. Colorants and other impurities present on the textiles pose a big challenge to the continuity of the chemical recycling. The purpose of our study is to find out methods for the removal of the dyes or colorants from the cotton textiles for the end of life scenarios like recycling. The removal process of the chemical additives in an ecological way would add value to the recycling of textiles, which would help to obtain a recycled textile with the upgraded quality. To examine this subject, a literature study with respect to the chemicals and the removal process along with the recycling methods was done. In general, alkaline reductive treatment is performed using sodium hydroxide and reducing agent like sodium hydrosulphite for the color stripping of the reactive dyed textiles. Bibliographic survey on the various color stripping process, their drawbacks, viability for industrial scale-up etc was also performed. In this study, we have proposed the application of the ozone assisted process for the color stripping of the reactive dyed textiles using the pilot scale setup. The quality of the color stripped fabrics was determined in terms of the color stripping %, mechanical properties and the colorimetric analysis. Response surface methodology tools like the Box-Behnken design was utilized to examine the effects of three parameters like pH of the treatment (3-7), the reaction time (10-50 min) and the ozone concentration (5-85 g/m3 of ozone). With the ozonation process, color stripping of almost 98 % was achieved. The ozonation process is done at room temperature and also can be performed without any harsh chemicals. Additionally, we have also studied the other color stripping methods like the glucose based process. The results demonstrate that the glucose assisted process can emerge as an ecological alternative to the conventional process. Glucose can act as a green alternative reducing agent to the conventional reducing agent like sodium hydrosulphite. The damage to the mechanical properties are less as compared to the conventional and the ozone based process. However, the glucose assisted process utilized high temperatures for efficient color stripping. Finally, the study has highlighted the need of developing novel methods with minimum damage to the quality of the fibers. Amongst all the impact indicators, “Water resource depletion” is the highest for all the ozonation processes since it has the greatest relative value after normalization. It was found that the major contributors to the environmental impacts were Electricity and Oxygen formation. To optimize the impacts, new experimental conditions have been studied. Even, Color stripping of the pigment printed textiles was studied with the ozone assisted process. This study also highlights the need to study presence of contaminants like coatings present on the textiles during their end of life
Langlois, Juliette. "Représentation dans l'Analyse de Cycle de Vie des impacts environnementaux des usages de l'espace marin - illustration sur les activités de pêche et d'algoculture." Thesis, Montpellier, SupAgro, 2013. http://www.theses.fr/2013NSAM0004/document.
Повний текст джерелаLife Cycle Assessment (LCA) is a robust tool often used for eco-design. It allows the assessment of environmental impacts, at a global scale, accounting for all stage of a product life cycle, “from cradle to grave”. There is a methodological gap in this method to account for occupation and transformation impacts in marine ecosystems due to human activities. The task accomplished during this PhD is the development of a methodological framework for a new impact category in LCA in order to overcome this lack: the sea use. As only a few studies have been carried out in this field, the general framework for sea use had to be defined. This framework has been built following the example of land use and integrating the new methods of assessment developed for LCA of seafood. Thus, a bibliographic work has been performed on the topic of land use and of LCA of fisheries and aquaculture. Cause-effect chains, linking human interventions to the potential impacts they can induce on their environment, were precisely defined. We focused on one of these cause-effect chains in particular, with the aim to build an operational impact assessment method. The method has then been made operational for the assessment of occupation and transformation impacts on the ecosystem life support functions. Because impacts of biotic biomass removal are an essential concern in marine ecosystems, the method has first been applied to fisheries. It was also exemplified on the case of offshore cultivated seaweed, as a case-study of ecodesign using LCA for seafood. Thus, a new operational methd of sea use impact assessment is proposed and can be applied to case-studies
Mailhac, Adelaide. "Contribution au développement d'une méthodologie d'évaluation environnementale aux échelles urbaines." Thesis, Toulouse, INSA, 2019. http://www.theses.fr/2019ISAT0034.
Повний текст джерелаBuilding stock represents a major capital in economic, cultural and social terms. This stock to function, to renew itself and to grow consumes larges flows of energy and raw materials. At the 2015 United Nations Climate Change Conference, governments around the world pledged to limit global warming below 2 ° C. The local translation of this commitment leads local councilors to make sustainable urban development and ecological transition two central elements of their urban planning policy. If the project of an independent discipline, which would aim to manage and produce building stocks in a scientific way, appears today unrealistic, it is because the production of these stocks is conditioned by values (economical, cultural, aesthetical...), and because it involves multiple actors and practices: urban planners, city councilors, design offices, users.... However, scientific knowledge and tools can provide valuable decision support to urban actors through the information they provide. The thesis presented here is a contribution to research in environmental assessment applied to cities
Gonzalez, rodriguez Magno angel. "Intégration de concepts de gestion de chaine logistique en boucle fermée (CLSCM) et d'analyse du cycle de vie (ACV) : contribution à l’économie circulaire et application aux batteries au plomb." Electronic Thesis or Diss., Toulouse, INPT, 2020. http://www.theses.fr/2020INPT0114.
Повний текст джерелаOver the past decade, the supply chain concept has undergone significant evolution, transitioning toward an integrated approach that considers both upstream and downstream chains simultaneously. This evolution has led to the development of the closed-loop supply chain (CLSC), aimed at optimizing material utilization across various manufacturing processes. While progress in managing and designing CLSCs has been notable, most research approaches have primarily focused on economic aspects, often addressing environmental concerns as an afterthought or separately via life cycle assessment (LCA). The closure of the supply chain loop typically results in a more intricate system compared to traditional supply chains. Consequently, there is an urgent need for specifically tailored quantitative methods and models to assist managers and professionals in creating more efficient, cost-effective, and sustainable closed-loop systems. The overarching scientific objective of this study is to conduct an integrated analysis that combines CLSC management concepts and Life Cycle Assessment, exploring their interdependence. This investigation will be supported by the increased utilization of lead-acid batteries in motor vehicles, especially in the context of electric vehicles, considered a promising future vehicle option.The model formulation relies on a mixed-variable linear mathematical programming procedure (MILP), incorporating a multi-criteria approach focused on cost minimization and environmental impact. This formulation considers five tiers in the forward network (suppliers, producers, distributors, wholesalers, and retailers) and seven tiers in the reverse network (collection and recycling centers, product disposal, disassembly plant, raw material disposal, third parties, and remanufacturing). The multi-level multi-period strategy involves initially identifying and reducing significant criteria applicable in the multi-objective (in this case, bi-objective) optimization procedure. Two crucial criteria emerged: the total cost of the supply chain and total greenhouse gas emissions, which were recognized as conflicting, warranting the implementation of an epsilon-constraint procedure.The first application of decision support methods (M-TOPSIS and TOPSIS) facilitated the identification of potential supply chain configurations. Subsequently, a life cycle assessment was conducted on the Pareto front-end solutions, enabling a comprehensive multi-criteria analysis involving the selected impact analysis method (Impact 2002+) and the cost criterion. This step revealed solutions that outperformed those previously identified, validating the approach.Strategically, this required the development of environmental submodules for the supply chain blocks to consistently compute environmental indicators. This involved extracting data from the EcoInvent database and utilizing impact factors pertinent to the study's analysis method.Lastly, a sensitivity study highlighted that, for the case study: (i) an increase in the percentage of raw materials recovered from a product designated for recycling, (ii) an improved recovery rate, and (iii) enhancements in the manufacturing/remanufacturing process regarding GHG emissions, are particularly significant in improving the performance of all indicators
Lotteau, Marc. "Développement d’une approche d’intégration des questions de morphologie urbaine dans l’évaluation environnementale des projets d’aménagement à l’échelle du quartier basée sur l’analyse de cycle de vie." Thesis, Bordeaux, 2017. http://www.theses.fr/2017BORD0685/document.
Повний текст джерелаThis work is a contribution to the environmental assessment of urban development projects in the upstream design phase. It focuses on integrating urban morphology issues with life cycle analysis (LCA) applied to the built environment at the neighborhood scale. The energy performance of buildings is partly determined by design choices relating to the urban form and its interactions with climate. The objective of this thesis is to provide to the design teams a way to take into account the influence of the urban form on the energy potentials of a neighborhood with a life cycle perspective.A preliminary study was conducted on two neighborhoods to detail the influence of the urban form on their energy potentials. An approach to modeling the embodied energy and embodied carbon of buildings is proposed. A sensitivity analysis and a contribution analysis of this model are performed on two generic building shapes. The results demonstrate the key influence of the shape of the buildings and a very strong link between the embodied energy and the building’s compactness. An approach to assessing the passive heating potential and passive summer comfort potential at the neighborhood scale is also developed. It is based on the transformation of a neighborhood in an equivalent urban form (regular array of block buildings), and on the application of metamodels of a thermal simulation engine. The method is tested and discussed on a corpus of 45 case studies. These methodological developments are intended to be integrated into an existing tool for neighborhood LCA (NEST)
Prinçaud, Marion. "Développement d'un outil d'aide à la décision environnementale basé sur l'analyse de cycle de vie intégré au processus de conception." Phd thesis, Paris, ENSAM, 2011. http://pastel.archives-ouvertes.fr/pastel-00589315.
Повний текст джерелаGonda, Louise. "Analyse environnementale de la gestion de fin de vie des déchets d’équipements électriques et électroniques par les entreprises d’économie sociale en Belgique francophone." Doctoral thesis, Universite Libre de Bruxelles, 2017. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/261164.
Повний текст джерелаDoctorat en Sciences
info:eu-repo/semantics/nonPublished
Pelletier, Chloé. "Analyse environnementale et économique des filières bois-énergie." Thesis, Université de Lorraine, 2017. http://www.theses.fr/2017LORR0331/document.
Повний текст джерелаThe objective of this thesis is to conduct the environmental and economic analysis of several wood-to-energy production chains based on various wood combustion technologies. The material and energy balances of the production chains are determined with modeling of forest growth and of wood combustion. The wood combustion models use the emission factors from real-scale experimental tests on stoves and boilers. Forest growth is modeled for maritime pine and beech plantations, according to several forest management schemes. The data on the harvest, transformation, and transport steps, as well as the economic data, were taken from the literature. The environmental analysis compares the impacts calculated by two methods: ReCiPe and CML 2001. A dynamic analysis of the “climate change” impact complements the discussion on the environmental impacts of energy wood. Finally, we open a broader perspective with modeling of land use and production costs of bioenergy on a global scale. The results of the Life Cycle Analysis show the importance of both combustion quality (linked to combustion technology), and the transformation and transport steps. For instance, pellet stoves and boilers have excellent efficiencies, but suffer from the consumption of fossil fuels to dry the biomass. These technologies are also much more expensive to buy than log stoves or boilers. The dynamic analysis shows that the intensification of wood production via the shortening of growth cycles leads to higher impacts that are not completely offset by the higher production rate
Mery, Yoann. "Development of an integrated tool for Process Modelling and Life Cycle Assessment : Ecodesign of process plants and application to drinking water treatment." Thesis, Toulouse, INSA, 2012. http://www.theses.fr/2012ISAT0022/document.
Повний текст джерелаAdapted tools for tackling environmental issues are necessary but they are still missing in industry. Indeed, the introduction of ecodesign practices in the process industry is hindered by the lack of realism and flexibility of related tools.The main objectives of this research work were the development of a fully integrated tool for Process Modelling & Life Cycle Assessment (PM-LCA), and the formulation of an affiliated methodological approach for process ecodesign. The software tool and the methodological approach are meant to be applied to water treatment technologies.The literature review leads to a better comprehension of the required research efforts. The main guidelines for the development of the software tool are stated accordingly.The developed tool, named EVALEAU, consists in a library of unit process models allowing life cycleinventory calculation in function of process parameters. The tool is embedded in Umberto® LCA software and is complementary to Ecoinvent database. A sensitivity analysis toolbox, based on theMorris method, was included for the identification of the process parameters mainly affecting the lifecycle impact assessment results.EVALEAU tool was tested through two case studies - two existing drinking water plants. There liability of the modelling approach was demonstrated through water quality simulation, energy and materials inventory simulation, compared with site real data. An ecodesign procedure was experienced on a complex water treatment chain, demonstrating the relevance of simulation results and the usefulness of sensitivity analysis for an optimal choice of operation parameters.This first developed PM-LCA tool is dedicated to foster the introduction of ecodesign practices in the water industry
Pelletier, Chloé. "Analyse environnementale et économique des filières bois-énergie." Electronic Thesis or Diss., Université de Lorraine, 2017. http://www.theses.fr/2017LORR0331.
Повний текст джерелаThe objective of this thesis is to conduct the environmental and economic analysis of several wood-to-energy production chains based on various wood combustion technologies. The material and energy balances of the production chains are determined with modeling of forest growth and of wood combustion. The wood combustion models use the emission factors from real-scale experimental tests on stoves and boilers. Forest growth is modeled for maritime pine and beech plantations, according to several forest management schemes. The data on the harvest, transformation, and transport steps, as well as the economic data, were taken from the literature. The environmental analysis compares the impacts calculated by two methods: ReCiPe and CML 2001. A dynamic analysis of the “climate change” impact complements the discussion on the environmental impacts of energy wood. Finally, we open a broader perspective with modeling of land use and production costs of bioenergy on a global scale. The results of the Life Cycle Analysis show the importance of both combustion quality (linked to combustion technology), and the transformation and transport steps. For instance, pellet stoves and boilers have excellent efficiencies, but suffer from the consumption of fossil fuels to dry the biomass. These technologies are also much more expensive to buy than log stoves or boilers. The dynamic analysis shows that the intensification of wood production via the shortening of growth cycles leads to higher impacts that are not completely offset by the higher production rate
Gay, Swann. "Elaboration de matrices microcellulaires de polymère biosourcé par la technologie CO², supercritique." Thesis, Angers, 2017. http://www.theses.fr/2017ANGE0007.
Повний текст джерелаIn the present context, where the preservation of resources and sustainable development became the main issues of this century, the production of more efficient and environmentally friendly materials is essential. Thus, this work deals with thedevelopment of biobased polymeric porous matrix using SC-CO2. The use of PLA makes it possible to produce 100% biosourced and biodegradable matrices, while the use of CO2-SC reduces the ecological impact of the shaping processes. In a first step, a parametric study of PLA matrix shaping by a thermal induced phase separation (TIPS) method coupled to CO2 drying was performed. Low density microcellular matrices were obtained with tunable structural and mechanical properties. The whole process was analyze by life cycle assessment and the results showed that SC-CO2 replacing freeze drying has reduced the environmental impact between 50 and 90%. Secondly, a phase separation in situ study by tomography-X synchrotron radiation tomography allowed us to better understand the mechanics of our process. Finally, the last part of this work was devoted to the implementation of a solvent free process, using SC-CO2 as a blowing agent. The results obtained were used to carry out a comparative study of the two processes developed
Lotteau, Marc. "Développement d’une approche d’intégration des questions de morphologie urbaine dans l’évaluation environnementale des projets d’aménagement à l’échelle du quartier basée sur l’analyse de cycle de vie." Electronic Thesis or Diss., Bordeaux, 2017. http://www.theses.fr/2017BORD0685.
Повний текст джерелаThis work is a contribution to the environmental assessment of urban development projects in the upstream design phase. It focuses on integrating urban morphology issues with life cycle analysis (LCA) applied to the built environment at the neighborhood scale. The energy performance of buildings is partly determined by design choices relating to the urban form and its interactions with climate. The objective of this thesis is to provide to the design teams a way to take into account the influence of the urban form on the energy potentials of a neighborhood with a life cycle perspective.A preliminary study was conducted on two neighborhoods to detail the influence of the urban form on their energy potentials. An approach to modeling the embodied energy and embodied carbon of buildings is proposed. A sensitivity analysis and a contribution analysis of this model are performed on two generic building shapes. The results demonstrate the key influence of the shape of the buildings and a very strong link between the embodied energy and the building’s compactness. An approach to assessing the passive heating potential and passive summer comfort potential at the neighborhood scale is also developed. It is based on the transformation of a neighborhood in an equivalent urban form (regular array of block buildings), and on the application of metamodels of a thermal simulation engine. The method is tested and discussed on a corpus of 45 case studies. These methodological developments are intended to be integrated into an existing tool for neighborhood LCA (NEST)
Yao, Kouadio Assemien François. "Développement d'une méthodologie pour une meilleure évaluation des impacts environnementaux de l'industrie extractive." Thesis, Montpellier, 2018. http://www.theses.fr/2018MONTG001/document.
Повний текст джерелаAn increasing demand of mineral resources is associated with modern society development. In parallel, mining projects face strong oppositions both from public and from environment protection agencies, due to the potential impacts associated with ore extraction. In order to conciliate the needs of producing raw materials and of taking into account the preservation of the quality of the environment, it is necessary to assess the environmental impact previous to the start of the mining activities. The Environmental Impact Assessment procedure helps to identify and evaluate the environmental impacts of a project. Although Environmental Impact Assessment (EIA) procedure is mandatory, the regulations do not impose any impact assessment method. Thus, EIA practitioners are free to use the method that suits them and their own expertise to estimate the environmental impacts of a project. The main purpose of this work is to propose a method to more effectively evaluate the environmental impacts of the mining industry. To achieve this, two approaches have been explored: the Mining Environmental Impact Assessment Methodology (MEIAM) developed in this thesis and the Life Cycle Assessment (LCA), which is a standardized methodology. MEIAM is based on the risk analysis approach and makes it possible to evaluate the impacts taking into account the climatic and geological conditions and the initial state of the zone. LCA is a standardized technique that assesses the impacts produced on the site and those generated off-site but whose generating activities are related to the system studied. These methods were implemented on a gold mine in Côte d’Ivoire.MEIAM, taking into account the particular characteristics of the study area, showed high impact results for both surface water and groundwater pollution, mainly at the operation and post-closure stages. This study has also shown that pollution sources with high level impacts include tailings, soils previously contaminated by dust fallout and mining works. Regarding the LCA, which is in essence an overall method, it has made it possible to highlight quite significant off-site impacts. For on-site effects, the study showed that the impacts on human health are mainly due to metal emissions from operation activities (ore processing and tailings management as well as blasting). Finally, our work showed that all the impacts were better taken into account by a combination of MEIAM and LCA in the EIA procedures
Briere, Raphaël. "Etude ACV des chantiers de démolition en vue de la préservation des ressources : focus sur les procédés de transport et de décharge." Thesis, Paris Est, 2016. http://www.theses.fr/2016PESC1003/document.
Повний текст джерелаThe preservation of natural ressources is one of the biggest concerns for the years to come. The building sector that fulfills the need of a housing for every human being requires a lot of materials. Indeed, this industry plays a crucial role. Then, it seems relevant to study the building end of life which managing can transform waste into ressources. Thanks to the Life Cycle Assessment, it is possible to evaluate the environmental impacts of demolition sites and also to estimate the potential benefits of a more durable managing. From a traditional demolition where waste separation was not or little done, we are now going to a selective demolition where waste sorting is made and the different waste categories are sent to specific installations (recycling platforms, incinerators or landfills for example). Nowadays, waste recyling is being encouraged particularly for materials where the environmental benefits come with the economic ones like for metals. Our work considered the reuse of structural elements in reinforced concrete instead of their recycling. It allows to increase their lifetime while decreasing the need in mineral ressources. The environmental relevance of this solution was studied. The second contribution deals with the data adaptation needed in LCA. During the various LCA studies done in this work, the Ecoinvent database was used. However, the provided data was often too aggregated and consisted in average data which reduces the relevance of using it in specific cases. A deep analysis of the truck transportation and the landfill processes was made as well as the adaptation needed to be coherent with the specific case of demolition sites located in France. In the case of the transport process, the empty returns were more specifically taken into account. For the landfill process, one has to deal with the differences between the french and the swiss infrastructures used as the reference ones. Thus, this data adaptation could be extended to other transport and landfill processes but also to other Ecoinvent processes in order to reinforce the reliability of LCA studies
Yao, Kouadio Assemien François. "Développement d'une méthodologie pour une meilleure évaluation des impacts environnementaux de l'industrie extractive." Electronic Thesis or Diss., Montpellier, 2018. http://www.theses.fr/2018MONTG001.
Повний текст джерелаAn increasing demand of mineral resources is associated with modern society development. In parallel, mining projects face strong oppositions both from public and from environment protection agencies, due to the potential impacts associated with ore extraction. In order to conciliate the needs of producing raw materials and of taking into account the preservation of the quality of the environment, it is necessary to assess the environmental impact previous to the start of the mining activities. The Environmental Impact Assessment procedure helps to identify and evaluate the environmental impacts of a project. Although Environmental Impact Assessment (EIA) procedure is mandatory, the regulations do not impose any impact assessment method. Thus, EIA practitioners are free to use the method that suits them and their own expertise to estimate the environmental impacts of a project. The main purpose of this work is to propose a method to more effectively evaluate the environmental impacts of the mining industry. To achieve this, two approaches have been explored: the Mining Environmental Impact Assessment Methodology (MEIAM) developed in this thesis and the Life Cycle Assessment (LCA), which is a standardized methodology. MEIAM is based on the risk analysis approach and makes it possible to evaluate the impacts taking into account the climatic and geological conditions and the initial state of the zone. LCA is a standardized technique that assesses the impacts produced on the site and those generated off-site but whose generating activities are related to the system studied. These methods were implemented on a gold mine in Côte d’Ivoire.MEIAM, taking into account the particular characteristics of the study area, showed high impact results for both surface water and groundwater pollution, mainly at the operation and post-closure stages. This study has also shown that pollution sources with high level impacts include tailings, soils previously contaminated by dust fallout and mining works. Regarding the LCA, which is in essence an overall method, it has made it possible to highlight quite significant off-site impacts. For on-site effects, the study showed that the impacts on human health are mainly due to metal emissions from operation activities (ore processing and tailings management as well as blasting). Finally, our work showed that all the impacts were better taken into account by a combination of MEIAM and LCA in the EIA procedures
Lamraoui, Amina. "Traitement de surface par texturation laser : une alternative "propre" de préparation de surface pour la projection thermique." Phd thesis, Université de Technologie de Belfort-Montbeliard, 2011. http://tel.archives-ouvertes.fr/tel-00703229.
Повний текст джерелаLoubet, Philippe. "Assessing the environmental impacts of a complex urban water system based on the life cycle assessment framework : development of a versatile model and advanced water deprivation indicators." Thesis, Montpellier, SupAgro, 2014. http://www.theses.fr/2014NSAM0037/document.
Повний текст джерелаTo improve water management at the scale of large cities is a real challenge. However, the quantification of flows and environmental impacts linked to water use are not yet sufficiently developed. This is the objective of the thesis: “how to model complex urban water system of a megacity for assessing its environmental impacts in relation to the provided services to water users, within the life cycle assessment (LCA) framework?” The core of the thesis is the development of a generic framework defining water flows and environmental impacts associated with 3 categories of items – i.e., water technologies, water users and water resources – from a LCA point of view. The UWS model (termed WaLA) is built through a modular approach allowing the interoperation of these three components in an integrated way. The model provides indicators of impacts on services which may be useful to decision makers and stakeholders. It simplifies the evaluation of forecasting scenarios and decreases the complexity of the urban water system while ensuring its good representation from a LCA perspective. In addition to this main objective, the thesis also aims at refining water use impact indicators at a relevant scale for UWS. A methodology that assesses water deprivation at the sub-river basin scale in life cycle impact assessment (LCIA) integrating downstream cascade effects has been developed. It allows differentiating the withdrawal and release locations within a same river basin. The WaLA model and its associated indicators are applied to assess the environmental impacts of the water system of a Paris suburban area (perimeter of Syndicat des Eaux d'Île-de-France). It shows the interest and the applicability of the model for assessing and comparing baseline and forecasting scenarios
Gaillot, Tiphaine. "Évaluation de l’impact des émissions aériennes sur le changement climatique : développement de la méthode d’Analyse du Cycle de Vie et recommandations pour la sélection de carburants alternatifs." Electronic Thesis or Diss., Sorbonne université, 2023. https://accesdistant.sorbonne-universite.fr/login?url=https://theses-intra.sorbonne-universite.fr/2023SORUS538.pdf.
Повний текст джерелаGiven the increase in demand from the aviation sector and its emissions, we need to assess the impact of aviation on the environment. This thesis focuses on the impact of aviation emissions on climate change. This category is the most impacted by subsonic aircraft. Various levers have been deployed to mitigate this impact, including the incorporation of alternative fuels. The Life Cycle Assessment method is the one used in this work. The aim is to assess all emissions having a direct and indirect impact on climate change during a long-haul or short-haul, for the fossil fuel Jet A-1, and alternative jet fuels such as FT-SPK (paraffinic kerosene from Fischer-Tropsch synthesis) and hydrogen. As most of the fuel is burnt at high altitude during the cruise phase and the majority of emissions have a greater impact at cruising altitudes, we first look at the nature of emissions at high altitude and their impact on climate change, based on GWP (global warming potential) at different time horizons. The assessment of high-altitude emissions for different types of jet fuel over 20 and 100-year time horizons illustrated the crucial role of short-lived climate forcers, especially nitrogen oxides and contrails-cirrus. In a second stage, the scope of the air transport assessment has been extended to include the airport, the aircraft, and the production and use of the fuel. These results demonstrate the importance of high-altitude emissions and the production phase in the complete assessment. The thesis concludes with an assessment of the impact of emissions during the use and production phase of fuel mix in 2050, based on the different energy demands specific to the of the International Energy Agency (IEA) report published in 2022. The development of low-emission processes, as well as changes in behavior and the implementation of specific sobriety policies, are essential to reducing the environmental impact of the aviation sector
Dahmani, Manel. "Analyse 4E (Energétique, Exergétique, Environnementale et Economique) de systèmes de valorisation énergétique de biomasses." Thesis, Paris, CNAM, 2017. http://www.theses.fr/2017CNAM1165/document.
Повний текст джерелаThe fossil fuels depletion and the need to reduce greenhouse gas emissions encourage the search for new energy sources that are renewable and less polluting. Thanks to its abundance, biomass appears as an interesting sector of replacement of fossil fuels. The objective of this work is to perform a 4E analysis (Energy, Exergy, Environmental and Economic) of an electricity production system via the gasification of palm waste. Palm watse constitutes one of the most abundant vegetable wealth in Tunisia and which today, remain very little exploited. A fixed bed gasifier coupled to an internal combustion engine is considered to produce330 kW of electricity. The Cold Gas Efficiency of the process is 58.58%. The results show that the energy and exergy yields of the system are 22.6% and 19.22%, respectively. The environmental performance of the system is evaluated using a Life Cycle Assessment (LCA). The economic evaluation is carried out in order to evaluate the cost of electricity production by the gasification plant. The results give a cost of 3.88 ct€ for 1kWh
Prézélus, Flavie. "Ecodesign of ultrafiltration membranes for drinking water production : an experimental and modelling approach." Thesis, Toulouse, INPT, 2019. http://www.theses.fr/2019INPT0088.
Повний текст джерелаAlthough ultrafiltration treatment processes are widely used for drinking water applications, their environmental performances remain poorly understood. The objectives of this work are to provide understanding of membrane environmental footprint, as well as to suggest and implement relevant innovative solutions for its mitigation. A multiphase ecodesign approach is applied to hollow fibres fabricated by phase inversion and operated in a dead-end mode. The two developed parameterized models evaluate environmental impacts during fabrication and operation as a function of operating conditions. The subsequent Life Cycle Assessment highlights glycerol-related operating conditions as interesting action levers for environmental mitigation of membrane fabrication. However, membrane operation accounts for nearly exclusively all environmental impacts, with electricity production and sodium hypochlorite fabrication as the two main contributors. The analysis also pinpoints the influence of filtration flux. Since opportunities for biosourced solvents exist, substitution of petrochemical solvents during membrane fabrication is chosen as an improvement strategy. A metrics-based methodological framework is suggested to rationalize sustainable membrane fabrication. Biosourced flat membranes using methyl lactate as a solvent have thus been prepared. The mixed environmental scores do not preclude solvent substitution as a relevant improvement strategy. Results highlight the feasibility and relevance of such an ecodesign approach based on process modelling and experimental work, and lay the foundations for further development
Kim, Bunthern. "Contribution to the design and control of a hybrid renewable energy generation system based on reuse of electrical and electronics components for rural electrification in developing countries." Thesis, Toulouse, INPT, 2019. http://www.theses.fr/2019INPT0041/document.
Повний текст джерелаWhile the Cambodia’s government is making effort to increase electricity production for its energy demand, it still remains dependent on the existing or the expansion of the centralized grid lines which have high initial investment cost. The temporally solution is to employ a distributed energy generation system which has lower life cycle cost and provides a diversity of technologies to meet the desired applications. Minimizing environmental impacts represents a major objective of sustainable development considering resources depletion and the limited capabilities of the environment to adapt. The potential of renewable energy resources has been well understood as the solutions to power rural development and to reduce the environmental impacts of energy generation. Due to advance in technologies and increasing consumer demands, there has been a vast amount of electrical and electronic waste which introduces severe impacts on the environment. The current strategies mainly rely on conventional waste collection and processing techniques for material recovery. This thesis proposed a solution of reusing discarded components in an isolated hybrid renewable energy system as the solution for electrification of rural Cambodia. This is frugal innovation, local solution with local materials for and with local people. A suitable configuration for the proposed system is a solar-hydro hybrid generation system since solar and water resources are plentiful in rural Cambodia. The components that are reused in the solution after being discarded include computer power supply units (PSUs) for the solar part, uninterruptable power supply units (UPSs) and three phase induction machines for the electrohydro part. Used auto-mobile batteries will be used for the system storage. The thesis presents in the first part the evaluation of the environmental impacts of the proposed reuse solution for rural electrification. The study of the environmental impacts is based on Life Cycle Assessment (LCA) methodology which compares the life cycle impacts of the proposed solution to that of a conventional solution. Moreover, a sensitivity analysis is achieved in order to evaluate the impacts of uncertainties of the environmental impacts. The second part of this work deals with the technological aspects of the reuse solution in both theory and experimentation. The first part of this aspect is focused on the repurposing of used computer power supply units (PSUs), through limited modifications of the circuits in order to increase its range of operation. The PSU which usually contains one of a few types of isolated DC-DC converters is repurposed as charge controller with MPPT control in a cheap micro-controller with very good results. The last part of this thesis studies a new configuration of generators based on re-used three-phase induction motors. The proposed single-phase generator is based on a three-phase machine in a modified version of the coupling and with a rather uncommon supply. Modelling is highly investigated. An inverterassisted topology where two windings will be supplied separately by two inverters for excitation and the remaining winding is connected to load. A new modeling of the generator has been studied. The results of simulation were compared to experimental test results in open loop study. These results have demonstrated the advantages of the new configuration in comparison to the previously proposed inverter-assisted topology in term of efficiency and minimization of torqueripple
Bicalho, Tereza. "Les limites de l'ACV. Etude de la soutenabilité d'un biodiesel issu de l'huile de palme brésilienne." Phd thesis, Université Paris Dauphine - Paris IX, 2013. http://tel.archives-ouvertes.fr/tel-01002055.
Повний текст джерелаDahmani, Manel. "Analyse 4E (Energétique, Exergétique, Environnementale et Economique) de systèmes de valorisation énergétique de biomasses." Electronic Thesis or Diss., Paris, CNAM, 2017. http://www.theses.fr/2017CNAM1165.
Повний текст джерелаThe fossil fuels depletion and the need to reduce greenhouse gas emissions encourage the search for new energy sources that are renewable and less polluting. Thanks to its abundance, biomass appears as an interesting sector of replacement of fossil fuels. The objective of this work is to perform a 4E analysis (Energy, Exergy, Environmental and Economic) of an electricity production system via the gasification of palm waste. Palm watse constitutes one of the most abundant vegetable wealth in Tunisia and which today, remain very little exploited. A fixed bed gasifier coupled to an internal combustion engine is considered to produce330 kW of electricity. The Cold Gas Efficiency of the process is 58.58%. The results show that the energy and exergy yields of the system are 22.6% and 19.22%, respectively. The environmental performance of the system is evaluated using a Life Cycle Assessment (LCA). The economic evaluation is carried out in order to evaluate the cost of electricity production by the gasification plant. The results give a cost of 3.88 ct€ for 1kWh
Kozderka, Michal. "Parametric LCA approaches for efficient design." Thesis, Strasbourg, 2016. http://www.theses.fr/2016STRAD050/document.
Повний текст джерелаThis work addresses the different issues that put a brake to using Lifecycle assessment (LCA) in product design by answering the main question of the research: How to make Lifecycle assessment faster and easier accessible for manufactured product design? In the LCA methodology we have identified two issues to deal with and their consecutive scientific locks : • Research of missing data : How to organize missing data? How to respect quantitative and qualitative dimensions? • Modeling of the lifecycle scenario : How to translate methodological choices into the lifecycle scenario model? How to transform the reference scenario into a new one? We have dealt with these issues using the scientific approach Case study according toRobert Yin. Our contributions are based on three case studies, between which the most important is study of High Impact Polypropylene recycling in the automotive industry. We have published it in the Journal of Cleaner Production. As result of our research we present two methods to improve efficiency of the LifecycleInventory Analysis (LCI) : To organize the missing data: Preliminary sensitivity analysis with LCA Poka-Yoke ; To help with scenario modeling: Method of workflows factorization, based on Reverse engineering. For further research we propose eight perspectives, mostly based on integration of our methods into Product Category Rules (PCR)-based platforms like EPD International or the European PEF
Rouault, Anthony. "Développement méthodologique pour la mise en oeuvre d’une démarche participative d’éco-quali-conception appliquée aux systèmes de production viticoles." Thesis, Angers, 2019. http://www.theses.fr/2019ANGE0011/document.
Повний текст джерелаTo address new challenges, including environmental ones, the redesign of agricultural systems must incorporate new objectives, change the way concepts and knowledge are mobilized and renew the evaluation methods and criteria used (Meynard et al., 2012). Eco-design aims to integrate environmental aspects into the design of a product (ISO 14006) and can therefore meet these needs and make it possible to design ecoefficient agricultural systems. Life Cycle Assessment (LCA) is a recommended environmental assessment method to support eco-design approaches. Moreover, in France, where 93% of wine production is produced under quality labels (INAO, 2016), quality is often as important as yield in defining wine production objectives. This thesis work explores the interest and modalities of a convergence between ecodesign and co-design of cropping systems. The problem is thus articulated in three stages: i) Why and how can a participatory eco-design approach be implemented in agriculture? ii) LCA and participatory eco-design approach in viticulture: which methodological questions and solutions? iii) How to integrate a grape quality objective into an eco-design approach in viticulture? These questions were explored through the implementation of a participatory eco-design approach involving winegrowers and wine advisors. This approach was defined and applied with two groups of winegrowers and their wine advisors in the Loire Valley
Herfray, Grégory. "Contribution à l'évaluation des impacts environnementaux des quartiers." Phd thesis, École Nationale Supérieure des Mines de Paris, 2011. http://pastel.archives-ouvertes.fr/pastel-00658220.
Повний текст джерела