Добірка наукової літератури з теми "Active medical implants"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Active medical implants".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Active medical implants":
Kim, Juho, Jimin Seo, Dongwuk Jung, Taeyeon Lee, Hunpyo Ju, Junkyu Han, Namyun Kim, et al. "Active photonic wireless power transfer into live tissues." Proceedings of the National Academy of Sciences 117, no. 29 (July 6, 2020): 16856–63. http://dx.doi.org/10.1073/pnas.2002201117.
Wychowański, Piotr, Anna Starzyńska, Paulina Adamska, Monika Słupecka-Ziemilska, Bartosz Kamil Sobocki, Agnieszka Chmielewska, Bartłomiej Wysocki, et al. "Methods of Topical Administration of Drugs and Biological Active Substances for Dental Implants—A Narrative Review." Antibiotics 10, no. 8 (July 28, 2021): 919. http://dx.doi.org/10.3390/antibiotics10080919.
Awaja, Firas, and Shengnan Zhang. "Self-bonding of PEEK for active medical implants applications." Journal of Adhesion Science and Technology 29, no. 15 (April 29, 2015): 1593–606. http://dx.doi.org/10.1080/01694243.2015.1037382.
Kumar, Raman. "A Bibliometric Analysis and Visualisation of Research Trends in Corrosion of Titanium Implants." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 2 (April 11, 2021): 120–25. http://dx.doi.org/10.17762/turcomat.v12i2.687.
Suresh, Ganzi, K. L Narayana, and M. Kedar Mallik. "Bio-Compatible Processing of LENSTM DepositedCo-Cr-W alloy for Medical Applications." International Journal of Engineering & Technology 7, no. 2.20 (April 18, 2018): 362. http://dx.doi.org/10.14419/ijet.v7i2.20.16734.
Gill, Harjot Singh. "A Bibliometric Analysis and Visualisation of Research Trends in Corrosion of Cobalt-Implants." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 2 (April 11, 2021): 86–91. http://dx.doi.org/10.17762/turcomat.v12i2.681.
Thind, Gurpreet. "A Bibliometric Analysis and Visualisation of Research Trends in Toxicity of Nickel-implants." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 2 (April 11, 2021): 75–80. http://dx.doi.org/10.17762/turcomat.v12i2.679.
Singh, Sandeep. "A Bibliometric Analysis and Visualisation of Research Trends in Cobalt-Based Orthopaedic Implants." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 2 (April 11, 2021): 159–63. http://dx.doi.org/10.17762/turcomat.v12i2.695.
Ramniwas, Seema. "A Bibliometric Analysis and Visualisation of Research Trends in Corrosion of knee implants." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 2 (April 11, 2021): 164–69. http://dx.doi.org/10.17762/turcomat.v12i2.697.
Ranjan, Nishant. "A Bibliometric Analysis and Visualisation of Research Trends in Health Issues of Nickel-Implants." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 2 (April 11, 2021): 109–14. http://dx.doi.org/10.17762/turcomat.v12i2.685.
Дисертації з теми "Active medical implants":
Qu, Zheng. "Biologically active assemblies that attenuate thrombosis on blood-contacting surfaces." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/50119.
Gercek, Cihan. "Immunité des implants cardiaques actifs aux champs électriques de 50/60 Hz." Thesis, Université de Lorraine, 2016. http://www.theses.fr/2016LORR0226/document.
The European Directive 2013/ 35 / EU specify minimum requirements for the protection of workers exposed to electromagnetic fields and define with implants as “workers at particular risk”. Regarding the implantable cardioverter defibrillator wearers (ICD) or pacemaker (PM), exposure to electric or magnetic field of extremely low frequency creates inductions inside the human body that generate interference voltage which may cause the dysfunction of the implant. This thesis investigates the electromagnetic compatibility of cardiac implants subjected to an electric field low frequency (50/60 Hz). Computational simulations are effectuated in order to design an experimental bench for the exposure of a phantom including pacemakers or implantable defibrillators. A provocative study is established to define the electric field thresholds for preventing any malfunction of the implant. In numerical simulations; a virtual human model (digital phantom containing a cardiac implant) was placed in an upright position in a vertical exposure to an electric field. The finite element method was used to define the inductions in the cardiac implant level with a resolution of 2 mm (CST® software). In the experimental part, a test bench designed to allow generating an electric field up to 100 kV / m at frequencies 50-60 Hz was constructed, optimized and employed to investigate the behavior of cardiac implants.Several configurations were studied. 54 active cardiac implants (43 pacemakers and 11 defibrillators) are submitted to very high electric field of 50-60 Hz (up to 100 kV / m) inside the experimental bench. No failure was observed for public exposure levels for most configurations (+ 99%) except for six pacemakers in the case of a configuration clinically almost inexistent: unipolar mode with maximum sensitivity and atrial sensing.The implants configured with a nominal sensitivity in bipolar mode are resistant to electric fields exceeding the low action levels (ALs), even for the most high ALs, as defined by 2013 / 35 / EU
Gercek, Cihan. "Immunité des implants cardiaques actifs aux champs électriques de 50/60 Hz." Electronic Thesis or Diss., Université de Lorraine, 2016. http://www.theses.fr/2016LORR0226.
The European Directive 2013/ 35 / EU specify minimum requirements for the protection of workers exposed to electromagnetic fields and define with implants as “workers at particular risk”. Regarding the implantable cardioverter defibrillator wearers (ICD) or pacemaker (PM), exposure to electric or magnetic field of extremely low frequency creates inductions inside the human body that generate interference voltage which may cause the dysfunction of the implant. This thesis investigates the electromagnetic compatibility of cardiac implants subjected to an electric field low frequency (50/60 Hz). Computational simulations are effectuated in order to design an experimental bench for the exposure of a phantom including pacemakers or implantable defibrillators. A provocative study is established to define the electric field thresholds for preventing any malfunction of the implant. In numerical simulations; a virtual human model (digital phantom containing a cardiac implant) was placed in an upright position in a vertical exposure to an electric field. The finite element method was used to define the inductions in the cardiac implant level with a resolution of 2 mm (CST® software). In the experimental part, a test bench designed to allow generating an electric field up to 100 kV / m at frequencies 50-60 Hz was constructed, optimized and employed to investigate the behavior of cardiac implants.Several configurations were studied. 54 active cardiac implants (43 pacemakers and 11 defibrillators) are submitted to very high electric field of 50-60 Hz (up to 100 kV / m) inside the experimental bench. No failure was observed for public exposure levels for most configurations (+ 99%) except for six pacemakers in the case of a configuration clinically almost inexistent: unipolar mode with maximum sensitivity and atrial sensing.The implants configured with a nominal sensitivity in bipolar mode are resistant to electric fields exceeding the low action levels (ALs), even for the most high ALs, as defined by 2013 / 35 / EU
Zhou, Mengxi. "CEM des implants cardiaques aux basses fréquences 50 Hz dans un contexte normatif." Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0110.
Targeting cardiology diagnosis and treatment, active implantable medical devices (AIMDs) have been rapidly developed and widely applied with constantly updated technologies in recent decades. It is vital for scientific research to catch up with the speed of the information era in terms of the side effects on human beings and the environment. Pacemakers (PMs), used for the treatment of arrhythmias (bradycardias and tachycardias), and implantable cardioverter defibrillators (ICDs), for palliating serious ventricular arrhythmias by electric shocks to the myocardial tissue are important AIMDs normally implanted in the human chest. Electromagnetic radiation is inevitable present in our surroundings and raised many questions concerning the potential effects on the AIMD-wearers. The increasing number of medical implant wearers, including those in active professional activities, has led to questions regarding their performance in the presence of an occupational electromagnetic field (EMF) exposure. Since the 1960s, these questions have concerned possible interference linked to the energy transport network. The frequencies allocated to electrical energy (50 Hz and 60 Hz) are in the analysis bandwidth of the cardiac signals, of which spectrum extends from a few Hertz to approximately 150 Hz. The AIMDs are usually equipped with selective filters enabling to significantly reduce or eliminate the interference. However, considering the nature formation of the heart signals, 50 Hz and 60 Hz may not be filtered in order to ensure the cardiac signal waves are correctly and completely sensed.In the workplaces, it is inevitable to have the existence of workers who are susceptible to the electromagnetic field (EMF)-related impact. The presence of workers wearing AIMDs is then to be considered as specific cases. In other words, particular attention should be given to AIMD carriers who are subject to higher risks and corresponding risk evaluation process should be established. The procedure for assessing the EMF exposures for workers bearing AIMDs was proposed in EN 50527 to determine the risk arising from the exposures in the workplaces. Immunity test on AIMDs is critical in the risk assessment procedure and requires a simple, feasible, and risk-free test method. To date, the electric field exposures at low frequencies has received little attention yet they commonly exist in the workplaces in electrical industries, for example, area near power lines and substations. In this study, high-intensity electric field exposures are mainly concerned. The frequency band was limited to extremely low frequency at 50 Hz to focus on the occupational exposures caused by power sources.The interference can be evaluated by the estimation of the induced voltage at its input. Equivalent systems can be built up by adopting this conception to reproduce the exposures and the implantation conditions in order to generate same effects at the input of cardiac implant (same induced voltage). In this work, a theoretical and experimental study was performed on an in vitro phantom that allowed to determine the voltage induced at the input of a cardiac implant subjected to a high-intensity electric field at 50 Hz. The phantom is composed of two parts with electrical characteristics similar to those of the human heart and the chest, where the cardiac lead and the housing are implanted. Experimental measurements and numerical simulation are coherent which validates the equivalence factors we found for our systems. Thus, the in vitro phantom can be applied as an equivalent system in the workplace for the immunity test on cardiac implants. Another result we established in this study is the equivalence between an electric field exposure system and an injection system which allows us to reduce the complexity of the study, and conduct simpler tests with reproduced perturbations
Siegel, Alice. "Etude de l’interaction mécanique entre un dispositif médical implantable actif crânien et le crâne face à des sollicitations dynamiques." Thesis, Paris, ENSAM, 2019. http://www.theses.fr/2019ENAM0012.
Active cranial implants are more and more developed to cure neurological diseases. In this context it is necessary to evaluate the mechanical resistance of the skull-implant complex under impact conditions as to ensure the patient’s security. The aim of this study is to quantify the mechanical interactions between the skull and the implant as to develop a finite element model for predictive purpose and for use in cranial implant design methodologies for future implants. First, material tests were necessary to identify the material law parameters of titanium and silicone. They were then used in a finite element model of the implant under dynamic loading, validated against 2.5 J-impact tests. The implant dissipates part of the impact energy and the model enables to optimize the design of implants for it to keep functional and hermetic after the impact. In the third part, a finite element model of the skull-implant complex is developed under dynamic loading. Impact tests on ovine cadaver heads are performed for model validation by enhancing the damage parameters of the three-layered skull and give insight into the behavior of the implanted skull under impact.This model is a primary tool for analyzing the mechanical interaction between the skull and an active implant and enables for an optimized design for functional and hermetic implants, while keeping the skull safe
Книги з теми "Active medical implants":
ANSI/AAMI/ISO 14708-3:2017; Implants for surgery — Active implantable medical devices — Part 3: Implantable neurostimulators. AAMI, 2017. http://dx.doi.org/10.2345/9781570206580.
ANSI/AAMI/ISO 14708-4:2008/(R)2011; Implants for surgery—Active implantable medical devices—Part 4: Implantable infusion pumps. AAMI, 2009. http://dx.doi.org/10.2345/9781570203596.
Dössel, Olaf, and Wolfgang C. Schlegel. World Congress on Medical Physics and Biomedical Engineering September 7 - 12, 2009 Munich, Germany: Vol. 25/VIII Micro- and Nanosystems in Medicine, Active Implants, Biosensors. Springer, 2010.
ANSI/AAMI/ISO 14708-1:2014; Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer. AAMI, 2014. http://dx.doi.org/10.2345/9781570205651.
Handbook of Biodegradable Polymers (Medical Reference and Soci and Delivery). CRC, 1998.
Частини книг з теми "Active medical implants":
Koch, Klaus P., and Oliver Scholz. "Telemedicine Using Active Implants." In Springer Handbook of Medical Technology, 1129–37. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-540-74658-4_61.
Sampath, Thamizharasan, Sandhiya Thamizharasan, and Prakash Srinivasan Timiri Shanmugam. "ISO 21534: Non-active Surgical Implants – Joint Replacement Implants." In Medical Device Guidelines and Regulations Handbook, 75–82. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91855-2_5.
Singh, Karnika. "ISO 16061: Instrumentation for Use in Association with Non-active Surgical Implants—General Requirements." In Medical Device Guidelines and Regulations Handbook, 83–90. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91855-2_6.
Bratu, Erin, Robert Dwyer, and Jack Noble. "A Graph-Based Method for Optimal Active Electrode Selection in Cochlear Implants." In Medical Image Computing and Computer Assisted Intervention – MICCAI 2020, 34–43. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-59716-0_4.
Filipović, Nenad, Nina Tomić, Maja Kuzmanović, and Magdalena M. Stevanović. "Nanoparticles. Potential for Use to Prevent Infections." In Urinary Stents, 325–39. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04484-7_26.
Rahmat-Samii, Yahya, and Jaehoon Kim. "Planar Antennas for Active Implantable Medical Devices." In Implanted Antennas in Medical Wireless Communications, 57–69. Cham: Springer International Publishing, 2006. http://dx.doi.org/10.1007/978-3-031-01531-1_6.
Brown, James E., Paul J. Stadnik, Jeffrey A. Von Arx, and Dirk Muessig. "RF-induced Heating Near Active Implanted Medical Devices in MRI: Impact of Tissue Simulating Medium." In Brain and Human Body Modelling 2021, 125–32. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15451-5_8.
Cohen, DDS, Nicolas. "Periodontal and Implant Treatment With Computerized Occlusal Analysis." In Advances in Medical Technologies and Clinical Practice, 1125–74. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9254-9.ch016.
"Implants for surgery — Active implantable medical devices — Part 3: Implantable neurostimulators." In ANSI/AAMI/ISO 14708-3:2017; Implants for surgery — Active implantable medical devices — Part 3: Implantable neurostimulators. AAMI, 2017. http://dx.doi.org/10.2345/9781570206580.ch1.
Censi, Federica, Eugenio Mattei, and Giovanni Calcagnini. "MRI interactions with medical devices." In The EACVI Textbook of Cardiovascular Magnetic Resonance, edited by Massimo Lombardi, Sven Plein, Steffen Petersen, Chiara Bucciarelli-Ducci, Emanuela R. Valsangiacomo Buechel, Cristina Basso, and Victor Ferrari, 70–76. Oxford University Press, 2018. http://dx.doi.org/10.1093/med/9780198779735.003.0012.
Тези доповідей конференцій з теми "Active medical implants":
Gallichan, Robert, David M. Budgett, and Daniel McCormick. "600mW Active Rectifier with Shorting-Control for Wirelessly Powered Medical Implants." In 2018 IEEE Biomedical Circuits and Systems Conference (BioCAS). IEEE, 2018. http://dx.doi.org/10.1109/biocas.2018.8584813.
Hoffmann, Klaus-Peter, Roman Ruff, Wiebke Droste, Rudiger Rupp, Heidi Olze, Werner Kneist, Jonas Friedrich Schiemer, et al. "Technical, Medical and Ethical Challenges in Networks of Smart Active Implants*." In 2019 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). IEEE, 2019. http://dx.doi.org/10.1109/embc.2019.8856977.
Li, Tianhui, Hailing Fu, Stephanos Theodossiades, and Sotiris Korossis. "Simultaneous Ultrasonic Power Transfer and Depth Feedback for Active Medical Implants." In 2023 IEEE International Conference on Mechatronics (ICM). IEEE, 2023. http://dx.doi.org/10.1109/icm54990.2023.10101914.
Drexler, Elizabeth S., Andrew J. Slifka, Nicholas Barbosa, and John W. Drexler. "Interaction of Environmental Conditions: Role in the Reliability of Active Implantable Devices." In ASME 2007 2nd Frontiers in Biomedical Devices Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/biomed2007-38072.
Nerem, Robert M. "Tissue Engineering: The Next Generation of Medical Implants." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-1161.
Ramos-Homs, Amy. "Synthesis of Bone Scaffold for Pediatric Bone Defects Using 3D Printing." In MME Undergraduate Research Symposium. Florida International University, 2022. http://dx.doi.org/10.25148/mmeurs.010560.
Zimmer, Lukas, Rouven Britz, Yannik Goergen, Gianluca Rizzello, Tim Pohlemann, Marcel Orth, Bergita Ganse, Stefan Seelecke, and Paul Motzki. "An SMA-Based Multifunctional Implant for Improved Bone Fracture Healing." In ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/smasis2021-67261.
Zhao, Jianming, and Yuan Gao. "A 13.56 MHz Active Rectifier with PMOS AC-DC Interface for Wireless Powered Medical Implants." In 2021 IFIP/IEEE 29th International Conference on Very Large Scale Integration (VLSI-SoC). IEEE, 2021. http://dx.doi.org/10.1109/vlsi-soc53125.2021.9606992.
Nanbakhsh, Kambiz, Marta Kluba, Barbara Pahl, Florian Bourgeois, Ronald Dekker, Wouter Serdijn, and Vasiliki Giagka. "Effect of Signals on the Encapsulation Performance of Parylene Coated Platinum Tracks for Active Medical Implants." In 2019 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). IEEE, 2019. http://dx.doi.org/10.1109/embc.2019.8857702.
Yang, Lijian, Mir Khadiza Akter, Ran Guo, Jianfeng Zheng, and Ji Chen. "Evaluation of MRI RF-induced for Active Implantable Medical Implants in the vicinity of other implantable devices." In 2023 IEEE/MTT-S International Microwave Symposium - IMS 2023. IEEE, 2023. http://dx.doi.org/10.1109/ims37964.2023.10188203.