Статті в журналах з теми "3D printing architecture"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "3D printing architecture".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Saleh Abd Elfatah, Ahmed. "3D Printing in Architecture, Engineering and Construction (Concrete 3D printing)." Engineering Research Journal 162 (June 1, 2019): 119–37. http://dx.doi.org/10.21608/erj.2019.139808.
Повний текст джерелаTalyosef, Orly. "Perspectives on BIM-Based 3D Printing for Sustainable Buildings." Architext 9 (2021): 36–52. http://dx.doi.org/10.26351/architext/9/3.
Повний текст джерелаSong, Min Jeong, Euna Ha, Sang-Kwon Goo, and JaeKyung Cho. "Design and Development of 3D Printed Teaching Aids for Architecture Education." International Journal of Mobile and Blended Learning 10, no. 3 (July 2018): 58–75. http://dx.doi.org/10.4018/ijmbl.2018070106.
Повний текст джерелаGarcía-Alvarado, Rodrigo, Claudia Muñoz-Sanguinetti, Alejandro Martínez-Rocamora, and Ginnia Moroni Orellana. "Condiciones arquitectónicas de la construcción impresa-3D." AUS, no. 32 (2022): 20–30. http://dx.doi.org/10.4206/aus.2022.n32-04.
Повний текст джерелаNicholas, Paul, Gabriella Rossi, Ella Williams, Michael Bennett, and Tim Schork. "Integrating real-time multi-resolution scanning and machine learning for Conformal Robotic 3D Printing in Architecture." International Journal of Architectural Computing 18, no. 4 (August 13, 2020): 371–84. http://dx.doi.org/10.1177/1478077120948203.
Повний текст джерелаRodrigues Carneiro, Luiz Renato, and José Jean-Paul Zanlucchi de Souza Tavares. "Design and implementation of 3D printer for Mechanical Engineering Courses." International Journal for Innovation Education and Research 9, no. 3 (March 1, 2021): 293–312. http://dx.doi.org/10.31686/ijier.vol9.iss3.3001.
Повний текст джерелаChu, Tiankuo, Soyeon Park, and Kun (Kelvin) Fu. "3D printing‐enabled advanced electrode architecture design." Carbon Energy 3, no. 3 (May 5, 2021): 424–39. http://dx.doi.org/10.1002/cey2.114.
Повний текст джерелаAbdallah, Yomna K., and Alberto T. Estévez. "3D-Printed Biodigital Clay Bricks." Biomimetics 6, no. 4 (October 7, 2021): 59. http://dx.doi.org/10.3390/biomimetics6040059.
Повний текст джерелаAllouzi, Rawan, Wael Al-Azhari, and Rabab Allouzi. "Conventional Construction and 3D Printing: A Comparison Study on Material Cost in Jordan." Journal of Engineering 2020 (May 1, 2020): 1–14. http://dx.doi.org/10.1155/2020/1424682.
Повний текст джерелаHansmeyer, Michael, and Benjamin Dillenburger. "Digital grotesque: Towards a micro-tectonic architecture." SAJ - Serbian Architectural Journal 5, no. 2 (2013): 194–201. http://dx.doi.org/10.5937/saj1302194h.
Повний текст джерелаCoppola, Sara, Giuseppe Nasti, Veronica Vespini, and Pietro Ferraro. "Layered 3D Printing by Tethered Pyro-Electrospinning." Advances in Polymer Technology 2020 (January 10, 2020): 1–9. http://dx.doi.org/10.1155/2020/1252960.
Повний текст джерелаBoumaraf, Hemza, and Mehmet İnceoğlu. "Integrating 3D Printing Technologies into Architectural Education as Design Tools." Emerging Science Journal 4, no. 2 (April 1, 2020): 73–81. http://dx.doi.org/10.28991/esj-2020-01211.
Повний текст джерелаKrūgelis, Linas. "3D printing technology as a method for discovering new creative opportunities for architecture and design." Landscape architecture and art 13 (December 10, 2018): 87–94. http://dx.doi.org/10.22616/j.landarchart.2018.13.10.
Повний текст джерелаPessoa, Sofia, and Ana Sofia Guimarães. "The 3D printing challenge in buildings." E3S Web of Conferences 172 (2020): 19005. http://dx.doi.org/10.1051/e3sconf/202017219005.
Повний текст джерелаAlforova, Zoya, Oksana Lahoda, Vladyslava Hurdina, Liudmyla Lytvyniuk, and Rostyslav Kupchyk. "Analysis of modern approaches to the application of 3D technologies in architecture and design." Revista Amazonia Investiga 11, no. 52 (May 29, 2022): 105–14. http://dx.doi.org/10.34069/ai/2022.52.04.11.
Повний текст джерелаŽujović, Maša, Radojko Obradović, Ivana Rakonjac, and Jelena Milošević. "3D Printing Technologies in Architectural Design and Construction: A Systematic Literature Review." Buildings 12, no. 9 (August 28, 2022): 1319. http://dx.doi.org/10.3390/buildings12091319.
Повний текст джерелаNasir, Osama, Mohd Faiz Iqbal, and Mohammad Arif Kamal. "An Appraisal of 3D Printing Technology in Interior Architecture and Product Design." Architecture Engineering and Science 3, no. 3 (August 19, 2022): 188. http://dx.doi.org/10.32629/aes.v3i3.1009.
Повний текст джерелаZhang, Longyu, Haiwei Dong, and Abdulmotaleb El Saddik. "From 3D Sensing to Printing." ACM Transactions on Multimedia Computing, Communications, and Applications 12, no. 2 (March 3, 2016): 1–23. http://dx.doi.org/10.1145/2818710.
Повний текст джерелаQu, Y. F., J. H. Ma, Y. Q. He, L. Zhang, F. C. Ren, and B. Li. "3D printing-directed flexible strain sensors of accordion-like architecture to achieve ultrastretchability with the assist of ultrasonic cavitation treatment." Journal of Physics: Conference Series 2085, no. 1 (November 1, 2021): 012042. http://dx.doi.org/10.1088/1742-6596/2085/1/012042.
Повний текст джерелаUlrikh, E. V., and V. V. Verkhoturov. "Features of food design on a 3D printer. A review." Food systems 5, no. 2 (July 11, 2022): 100–106. http://dx.doi.org/10.21323/2618-9771-2022-5-2-100-106.
Повний текст джерелаLiu, Chen-Guang, Yu-Ting Zeng, Ranjith Kankala, Shan-Shan Zhang, Ai-Zheng Chen, and Shi-Bin Wang. "Characterization and Preliminary Biological Evaluation of 3D-Printed Porous Scaffolds for Engineering Bone Tissues." Materials 11, no. 10 (September 26, 2018): 1832. http://dx.doi.org/10.3390/ma11101832.
Повний текст джерелаPuzatova, Anastasia, Pshtiwan Shakor, Vittoria Laghi, and Maria Dmitrieva. "Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer: A Review." Buildings 12, no. 11 (November 18, 2022): 2023. http://dx.doi.org/10.3390/buildings12112023.
Повний текст джерелаSon, Soomin, Pil-Hoon Jung, Jaemin Park, Dongwoo Chae, Daihong Huh, Minseop Byun, Sucheol Ju, and Heon Lee. "Customizable 3D-printed architecture with ZnO-based hierarchical structures for enhanced photocatalytic performance." Nanoscale 10, no. 46 (2018): 21696–702. http://dx.doi.org/10.1039/c8nr06788k.
Повний текст джерелаSHAHZAD, Qamar, Muhammad UMAİR, and Saad WAQAR. "Bibliographic analysis on 3D printing in the building and construction industry: Printing systems, material properties, challenges, and future trends." Journal of Sustainable Construction Materials and Technologies 7, no. 3 (September 30, 2022): 198–220. http://dx.doi.org/10.47481/jscmt.1143239.
Повний текст джерелаPeng, Guanhong. "Digital Fabrication and Mechanical Properties of 3D-printing Concrete." Highlights in Science, Engineering and Technology 10 (August 16, 2022): 61–69. http://dx.doi.org/10.54097/hset.v10i.1227.
Повний текст джерелаKumari, Gourvi, Kumar Abhishek, Sneha Singh, Afzal Hussain, Mohammad A. Altamimi, Harishkumar Madhyastha, Thomas J. Webster, and Abhimanyu Dev. "A voyage from 3D to 4D printing in nanomedicine and healthcare: part I." Nanomedicine 17, no. 4 (February 2022): 237–53. http://dx.doi.org/10.2217/nnm-2021-0285.
Повний текст джерелаNesic, Dobrila, Birgit M. Schaefer, Yue Sun, Nikola Saulacic, and Irena Sailer. "3D Printing Approach in Dentistry: The Future for Personalized Oral Soft Tissue Regeneration." Journal of Clinical Medicine 9, no. 7 (July 15, 2020): 2238. http://dx.doi.org/10.3390/jcm9072238.
Повний текст джерелаRider, Patrick, Željka Kačarević, Said Alkildani, Sujith Retnasingh, Reinhard Schnettler, and Mike Barbeck. "Additive Manufacturing for Guided Bone Regeneration: A Perspective for Alveolar Ridge Augmentation." International Journal of Molecular Sciences 19, no. 11 (October 24, 2018): 3308. http://dx.doi.org/10.3390/ijms19113308.
Повний текст джерелаZhang, Dianjin, Dekai Zhou, Guangyu Zhang, Guangbin Shao, and Longqiu Li. "3D printing lunar architecture with a novel cable-driven printer." Acta Astronautica 189 (December 2021): 671–78. http://dx.doi.org/10.1016/j.actaastro.2021.09.034.
Повний текст джерелаLi, Zhengning, Ge Chen, Haichen Lyu, Chenwang Yuan, and Frank Ko. "Structural Characterization of Hexagonal Braiding Architecture Aided by 3D Printing." MATEC Web of Conferences 153 (2018): 08004. http://dx.doi.org/10.1051/matecconf/201815308004.
Повний текст джерелаLeach, Neil. "Size Matters: Why Architecture is the Future of 3D Printing." Architectural Design 87, no. 6 (November 2017): 76–83. http://dx.doi.org/10.1002/ad.2241.
Повний текст джерелаBaskakova, Kseniya I., Alexander V. Okotrub, Lyubov G. Bulusheva, and Olga V. Sedelnikova. "Manufacturing of Carbon Nanotube-Polystyrene Filament for 3D Printing: Nanoparticle Dispersion and Electromagnetic Properties." Nanomanufacturing 2, no. 4 (December 15, 2022): 292–301. http://dx.doi.org/10.3390/nanomanufacturing2040017.
Повний текст джерелаCao, Xiangpeng, Shiheng Yu, Hongzhi Cui, and Zongjin Li. "3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials: A Review." Buildings 12, no. 4 (April 7, 2022): 453. http://dx.doi.org/10.3390/buildings12040453.
Повний текст джерелаAlboro, Ruevan Evangelista. "Applications of Additive Manufacturing in Architecture Study 3: Assessment of the Viability of using 3d printing for the Design and Prototyping of Historical Artifacts as Replicas." Advance Sustainable Science Engineering and Technology 4, no. 2 (November 6, 2022): 0220201. http://dx.doi.org/10.26877/asset.v4i2.13004.
Повний текст джерелаMirza, Mohd A., and Zeenat Iqbal. "3D Printing in Pharmaceuticals: Regulatory Perspective." Current Pharmaceutical Design 24, no. 42 (March 20, 2019): 5081–83. http://dx.doi.org/10.2174/1381612825666181130163027.
Повний текст джерелаStanton, M. M., C. Trichet-Paredes, and S. Sánchez. "Applications of three-dimensional (3D) printing for microswimmers and bio-hybrid robotics." Lab on a Chip 15, no. 7 (2015): 1634–37. http://dx.doi.org/10.1039/c5lc90019k.
Повний текст джерелаMenon, Ankitha, Abdullah Khan, Neethu T. M. Balakrishnan, Prasanth Raghavan, Carlos A. Leon y Leon, Haris Ali Khan, M. J. Jabeen Fatima, and Peter Samora Owuor. "Advances in 3D Printing for Electrochemical Energy Storage Systems." Journal of Material Science and Technology Research 8 (November 30, 2021): 50–69. http://dx.doi.org/10.31875/2410-4701.2021.08.7.
Повний текст джерелаHu, Hao, Xiaoxiao Cao, Tao Zhang, Zhenfu Chen, and Jinliang Xie. "Three-Dimensional Printing Materials for Cultural Innovation Products of Historical Buildings." Buildings 12, no. 5 (May 8, 2022): 624. http://dx.doi.org/10.3390/buildings12050624.
Повний текст джерелаWang, Zhuoyue, Hanwen Liu, Fengjuan Chen, and Qiangqiang Zhang. "A three-dimensional printed biomimetic hierarchical graphene architecture for high-efficiency solar steam-generation." Journal of Materials Chemistry A 8, no. 37 (2020): 19387–95. http://dx.doi.org/10.1039/d0ta06797k.
Повний текст джерелаRist, Ulrich, Yannic Sterzl, and Wilhelm Pfleging. "3D Printing of Silicon-Based Anodes for Lithium-Ion Batteries." ECS Meeting Abstracts MA2022-01, no. 2 (July 7, 2022): 427. http://dx.doi.org/10.1149/ma2022-012427mtgabs.
Повний текст джерелаChang, Shuai, Xiaolei Huang, Chun Yee Aaron Ong, Liping Zhao, Liqun Li, Xuesen Wang, and Jun Ding. "High loading accessible active sites via designable 3D-printed metal architecture towards promoting electrocatalytic performance." Journal of Materials Chemistry A 7, no. 31 (2019): 18338–47. http://dx.doi.org/10.1039/c9ta05161a.
Повний текст джерелаKhlytsov, N. V., V. V. Bachinsky, O. M. Shkurpit, and O. I. Kondratenko. "ANALYSIS OF FACTORS AFFECTING PROPERTIES OF A PRINTED PRODUCT USING A 3D PRINTER." Modern construction and architecture, no. 1 (September 29, 2022): 77–84. http://dx.doi.org/10.31650/2786-6696-2022-1-77-84.
Повний текст джерелаRaheem, Ansheed A., Pearlin Hameed, Ruban Whenish, Renold S. Elsen, Aswin G, Amit Kumar Jaiswal, Konda Gokuldoss Prashanth, and Geetha Manivasagam. "A Review on Development of Bio-Inspired Implants Using 3D Printing." Biomimetics 6, no. 4 (November 19, 2021): 65. http://dx.doi.org/10.3390/biomimetics6040065.
Повний текст джерелаTroemner, Matthew, Elham Ramyar, Jonathan Meehan, Benton Johnson, Nima Goudarzi, and Gianluca Cusatis. "A 3D-Printing Centered Approach to Mars Habitat Architecture and Fabrication." Journal of Aerospace Engineering 35, no. 1 (January 2022): 04021109. http://dx.doi.org/10.1061/(asce)as.1943-5525.0001359.
Повний текст джерелаMüller, Marcel, and Elmar Wings. "An Architecture for Hybrid Manufacturing Combining 3D Printing and CNC Machining." International Journal of Manufacturing Engineering 2016 (October 9, 2016): 1–12. http://dx.doi.org/10.1155/2016/8609108.
Повний текст джерелаYaman, Ulas, Nabeel Butt, Elisha Sacks, and Christoph Hoffmann. "Slice coherence in a query-based architecture for 3D heterogeneous printing." Computer-Aided Design 75-76 (June 2016): 27–38. http://dx.doi.org/10.1016/j.cad.2016.02.005.
Повний текст джерелаSullivan, Kyle T., Cheng Zhu, Eric B. Duoss, Alexander E. Gash, David B. Kolesky, Joshua D. Kuntz, Jennifer A. Lewis, and Christopher M. Spadaccini. "3D Printing: Controlling Material Reactivity Using Architecture (Adv. Mater. 10/2016)." Advanced Materials 28, no. 10 (March 2016): 1901. http://dx.doi.org/10.1002/adma.201670063.
Повний текст джерелаMazlan, Mohammad Azeeb, Mohamad Azizi Anas, Nor Aiman Nor Izmin, and Abdul Halim Abdullah. "Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products." Materials 16, no. 2 (January 10, 2023): 695. http://dx.doi.org/10.3390/ma16020695.
Повний текст джерелаDinc, Niyazi Ulas, Demetri Psaltis, and Daniel Brunner. "Optical neural networks: The 3D connection." Photoniques, no. 104 (September 2020): 34–38. http://dx.doi.org/10.1051/photon/202010434.
Повний текст джерелаWu, Shi Lin, and Xiang Yan Liu. "VC and ACIS/HOOPS Based Semi-Physical Virtual Prototype Design and Motion Simulation of 3D Printer." Applied Mechanics and Materials 437 (October 2013): 267–70. http://dx.doi.org/10.4028/www.scientific.net/amm.437.267.
Повний текст джерела