Добірка наукової літератури з теми "3D printing architecture"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "3D printing architecture".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "3D printing architecture"
Saleh Abd Elfatah, Ahmed. "3D Printing in Architecture, Engineering and Construction (Concrete 3D printing)." Engineering Research Journal 162 (June 1, 2019): 119–37. http://dx.doi.org/10.21608/erj.2019.139808.
Повний текст джерелаTalyosef, Orly. "Perspectives on BIM-Based 3D Printing for Sustainable Buildings." Architext 9 (2021): 36–52. http://dx.doi.org/10.26351/architext/9/3.
Повний текст джерелаSong, Min Jeong, Euna Ha, Sang-Kwon Goo, and JaeKyung Cho. "Design and Development of 3D Printed Teaching Aids for Architecture Education." International Journal of Mobile and Blended Learning 10, no. 3 (July 2018): 58–75. http://dx.doi.org/10.4018/ijmbl.2018070106.
Повний текст джерелаGarcía-Alvarado, Rodrigo, Claudia Muñoz-Sanguinetti, Alejandro Martínez-Rocamora, and Ginnia Moroni Orellana. "Condiciones arquitectónicas de la construcción impresa-3D." AUS, no. 32 (2022): 20–30. http://dx.doi.org/10.4206/aus.2022.n32-04.
Повний текст джерелаNicholas, Paul, Gabriella Rossi, Ella Williams, Michael Bennett, and Tim Schork. "Integrating real-time multi-resolution scanning and machine learning for Conformal Robotic 3D Printing in Architecture." International Journal of Architectural Computing 18, no. 4 (August 13, 2020): 371–84. http://dx.doi.org/10.1177/1478077120948203.
Повний текст джерелаRodrigues Carneiro, Luiz Renato, and José Jean-Paul Zanlucchi de Souza Tavares. "Design and implementation of 3D printer for Mechanical Engineering Courses." International Journal for Innovation Education and Research 9, no. 3 (March 1, 2021): 293–312. http://dx.doi.org/10.31686/ijier.vol9.iss3.3001.
Повний текст джерелаChu, Tiankuo, Soyeon Park, and Kun (Kelvin) Fu. "3D printing‐enabled advanced electrode architecture design." Carbon Energy 3, no. 3 (May 5, 2021): 424–39. http://dx.doi.org/10.1002/cey2.114.
Повний текст джерелаAbdallah, Yomna K., and Alberto T. Estévez. "3D-Printed Biodigital Clay Bricks." Biomimetics 6, no. 4 (October 7, 2021): 59. http://dx.doi.org/10.3390/biomimetics6040059.
Повний текст джерелаAllouzi, Rawan, Wael Al-Azhari, and Rabab Allouzi. "Conventional Construction and 3D Printing: A Comparison Study on Material Cost in Jordan." Journal of Engineering 2020 (May 1, 2020): 1–14. http://dx.doi.org/10.1155/2020/1424682.
Повний текст джерелаHansmeyer, Michael, and Benjamin Dillenburger. "Digital grotesque: Towards a micro-tectonic architecture." SAJ - Serbian Architectural Journal 5, no. 2 (2013): 194–201. http://dx.doi.org/10.5937/saj1302194h.
Повний текст джерелаДисертації з теми "3D printing architecture"
Blakeway, Adam M. "Experiments with 3D printing technologies in masonry construction." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/103493.
Повний текст джерелаCataloged from PDF version of thesis. "June 2014."
Includes bibliographical references (page 34).
Modern masonry construction finds itself in a cyclical pattern of "more of the same," insisting on standardized, basic designs consisting of little more than uniform stones laid in regular courses, which do little to add to the variability of the modem world. While these forms attain a surety in structural stability, they offer little in the form of variable aesthetics. 3D-printing, consistently hailed as one of the most promising developments of the 21 " century, allowing individuals from every walk of life to create and produce in real time, has, contrarily, failed to grasp our greater aspirations in the field of Architecture. Most attempts at the incorporation of 3D-printing technology in Architecture have simply been to scale the technologies to print larger and larger objects, eventually working up to entire buildings. While these efforts are beneficial in some ways, they consist of numerous drawbacks which make these types of strategies ultimately implausible, at least for the moment. Modern construction, once thought to be secure in its standards of structure and implementation, is now being challenged to develop designs far more elaborate than their "glass tower" counterparts by pushing the boundaries of what architectural moves are possible. The long held beliefs that stone must be orthogonal and uniform to be utilized in large-scale construction projects are being revamped in the wake of the 3D printing boom. This thesis seeks to find a synthesis between these two methods of modern construction, unifying the versatility and variability of 3D-printing and the stability and natural aesthetic of masonry, to create viable and aesthetically appealing architectural forms for the 2 1st century.
by Adam M. Blakeway.
S.B.
Kim, Kyungsik M. Arch Massachusetts Institute of Technology. "Printing the vernacular : 3D printing technology and its impact on the City of Sana'a, Yemen." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/103469.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (page 121).
This thesis project is a speculative proposal; it assumes that 3D printing technology is a major manufacturing and construction method in the future. The industrial revolution that has begun in the 19th century was the transition to a new manufacturing process. This transition included going from hand production to machine production and eventually changed the entire way of making things, buying things, moving things, and etc. The changes of our life led to the transformation of our cities. Current cities were formed based on the Industrial Supply Chain that enables flow of materials and products from supplier to customer. This supply chain decided locations of factories, retails, roads, ports, warehouses, and etc that have structured cities. In recent years, 3D printing has attracted increasing attention. The prospect of printing machines has inspired enthusiasts to proclaim that 3D printing will bring "the next industrial revolution", while others have reacted with skepticism and point to the technology's current limitations. However, 3D printing could proliferate rapidly over the coming decade. Improvements in speed and performance could enable unprecedented levels of mass customization, simplified supply chains, and even the "democratization" of manufacturing as consumers begin to print their own products. Although there has been a number of studies on the 3D Printing technology itself and its impact on economy, less attentions have been paid to its spatial impact or impact on our cities. As the industrial revolution transformed cities, 3D Printing is expected to change our current cities in many ways, as it will change the way of making, moving, buying things again. The fact that 3D Printing can be done near the point of consumption, implies several possible scenarios of future cities This thesis illustrates different degrees of influence of the technology in the city of Sana'a, Yemen. The city has four distinct areas currently: the historical world heritage site, a partially protected area, a modernized area, and an informal settlement. The four distinct areas will be changed in different ways by different uses of 3D printing technology. The tower house, which is one of the most significant building typologies of the city, is used to examine and compare the influences of the technology. More specifically, the ornament of the tower house and possible scenarios of transformation are the main design focus of the project. Ornament will appear in different scales and configurations in the future city of Sana'a, from high resolution ornament to inhabitable ornament.
by Kyungsik Kim.
M. Arch.
Peng, Bangan. "FUNCTIONAL 4D PRINTING BY 3D PRINTING SHAPE MEMORYPOLYMERS VIA MOLECULAR, MORPHOLOGICAL AND GEOMETRICALDESIGNS." University of Akron / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=akron1605873309517501.
Повний текст джерелаCampbell, Andrew S. "Recycled Aggregate & Robotic Contour Crafting." University of Cincinnati / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1554119761226049.
Повний текст джерелаMacias, Diego. "Topological (Bio)Timber: An Algorithm and Data Approach to 3d Printing a Bioplastic and Wood Architecture." University of Cincinnati / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1491305462260965.
Повний текст джерелаLundberg, Rasmus. "Kontextuell helhet av 3D-printad träullsandwich - Från prefab till printning in-situ." Thesis, KTH, Arkitektur, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-273734.
Повний текст джерелаThe project aims to propose a direction for how additive manufacturing methods can influence architecture, to study the techniques and find out which direction could be perceived as most rewarding or viable. How to use the potential of the new technology in a good way? I have tried to develop a product that utilizes the potential of the additive manufacturing methods and which is conceivable for full-scale realization in the construction sector in the near future. The product consists of a method for producing long lasting sandwich constructions with high wood content. The method reduces the building industry's climate impact and can provide great spatial qualities and design possibilities. Through physical experiments and exploration of various digital fabrication methods, I have tried to visualize and identify possibilities with these new technological aids. Through practical tests, I have tested my ideas of how these methods can be used effectively. The project was expanded from initially studying additive production methods to, later during the application phase, also include digital aids such as photogrammetry and tools for parametric design. The project has resulted in a strategy for printing cellulose-based sandwich constructions in printed molds of recyclable biocomposite.
Ramstedt, Clayton D. "Modular 3D Printer System Software For Research Environments." BYU ScholarsArchive, 2020. https://scholarsarchive.byu.edu/etd/8688.
Повний текст джерелаAlmerbati, Nehal. "Hybrid heritage : an investigation into the viability of 3D-printed Mashrabiya window screens for Bahraini dwellings." Thesis, De Montfort University, 2016. http://hdl.handle.net/2086/12482.
Повний текст джерелаГордюк, Іван Васильович, Ivan Vasilyevich Gordyuk, Анжела Борисівна Зузяк та Angela Borisivna Zuziak. "Особливості використання технології 3D-друку в будівництві". Thesis, Національний авіаційний університет, 2018. http://er.nau.edu.ua/handle/NAU/37949.
Повний текст джерелаSengeh, David Moinina. "Advanced prototyping of variable impedance prosthetic sockets for trans-tibial amputees : polyjet matrix 3D printing of comfortable prosthetic sockets using digital anatomical data." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/76573.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (p. 66-68).
This work, supported by the Media Lab Consortium, evaluates the design of a Variable Impedance Prosthetic (VIPr) socket for a transtibial amputee using computer-aided design and manufacturing (CAD/CAM). Compliant features are seamlessly integrated into a 3D printed socket to achieve lower interface peak pressures over bony protuberances by using anthropomorphic data acquired through surface scanning and magnetic resonance imaging techniques. An inverse linear mathematical transformation spatially maps quantitative measurements (bone tissue depth) of the human residual limb to the corresponding socket shape and impedance characteristics. The CAD/CAM VIPr socket is compared to a state-of-the-art prosthetic socket of similar internal geometry and shape, designed by a prosthetist using conventional methods. An active, bilateral transtibial male amputee of weight 70 kg walks on a force plate loaded 5-meter walkway, at self-selected speeds while synchronized ground reaction forces, motion capture data and socket residual limb interface pressures are measured for the evaluated sockets. We anticipated a decreased average interface pressure (measured using the Teksan F-SocketTM pressure sensors) in the VIPr socket, especially over stiff anatomical landmarks including the fibula head, the tibia, lateral and medial femoral condyles and medial tibial flare. Contact interface pressure recorded during stance of a complete gait cycle indicated a 15% and 17% reduction at toe-off and heel-strike respectively at the fibula head while the subject uses a VIPr socket in comparison to a conventional socket of similar internal shape. A corresponding 7% and 8% reduction in pressure is observed along the tibia. Similar trends of high-pressure reductions are observed during stair ascent trials with the VIPr socket.
by David Moinina Sengeh.
S.M.
Книги з теми "3D printing architecture"
BAÑÓN, Carlos, and Félix RASPALL. 3D Printing Architecture. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-8388-9.
Повний текст джерелаauthor, San Fratello Virginia, ed. Printing architecture: Innovative recipes for 3D printing. Princeton Architectural Press, 2018.
Знайти повний текст джерелаFratello, Virginia San, and Ronald Rael. Printing Architecture: Innovative Recipes for 3D Printing. Princeton Architectural Press, 2018.
Знайти повний текст джерелаLeach, Neil, and Behnaz Farahi. 3D-Printed Body Architecture. Wiley & Sons, Incorporated, John, 2017.
Знайти повний текст джерела3D-Printed Body Architecture. Wiley & Sons, Incorporated, John, 2018.
Знайти повний текст джерелаLeach, Neil, and Behnaz Farahi. 3D-Printed Body Architecture. Wiley & Sons, Incorporated, John, 2018.
Знайти повний текст джерелаLeach, Neil, and Behnaz Farahi. 3D-Printed Body Architecture. Wiley & Sons, Limited, John, 2017.
Знайти повний текст джерелаBAÑÓN, Carlos, and Félix RASPALL. 3D Printing Architecture: Workflows, Applications, and Trends. Springer Singapore Pte. Limited, 2020.
Знайти повний текст джерелаPress, Keep It Simple. Isometric Grid Paper: 6x9 for Quilt Pattern Planning, Architecture, 3D Printing, Landscaping. Independently Published, 2019.
Знайти повний текст джерелаPRESS, KEEP IT SIMPLE. ISOMETRIC GRID PAPER: 7x10 for quilt pattern planning, architecture, 3D printing, landscaping. Independently published, 2019.
Знайти повний текст джерелаЧастини книг з теми "3D printing architecture"
Fratello, Virginia San. "3D Printing Architecture." In TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings, 37–49. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65261-6_4.
Повний текст джерелаLópez, Mercedes Valiente, M. Carmen Sanz Contreras, and J. Ramon Osanz Díaz. "3D Printing in Presentation Architecture Projects." In Putting Tradition into Practice: Heritage, Place and Design, 636–44. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-57937-5_66.
Повний текст джерелаMolina-Siles, Pedro, Francisco Javier Cortina Maruenda, Hugo Barros Costa, and Salvador Gilabert Sanz. "3D Printing as a Technological Tool Geared Towards Architecture." In Architectural Draughtsmanship, 1063–73. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-58856-8_84.
Повний текст джерелаThomsen, Mette Ramsgaard, Martin Tamke, Aurelie Mosse, Jakob Sieder-Semlitsch, Hanae Bradshaw, Emil Fabritius Buchwald, and Maria Mosshammer. "Imprimer La Lumiere – 3D Printing Bioluminescence for Architectural Materiality." In Proceedings of the 2021 DigitalFUTURES, 305–15. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5983-6_28.
Повний текст джерелаMohamed, H., D. W. Bao, and R. Snooks. "Super Composite: Carbon Fibre Infused 3D Printed Tectonics." In Proceedings of the 2020 DigitalFUTURES, 297–308. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4400-6_28.
Повний текст джерелаRosendahl, P. L., and A. Wolf. "The business case for 3D printing in the built environment." In Structures and Architecture A Viable Urban Perspective?, 254–59. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003023555-31.
Повний текст джерелаKo, Minjae, Donghan Shin, Hyunguk Ahn, and Hyungwoo Park. "InFormed Ceramics: Multi-axis Clay 3D Printing on Freeform Molds." In Robotic Fabrication in Architecture, Art and Design 2018, 297–308. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92294-2_23.
Повний текст джерелаEti Proto, Meltem, and Ceren Koç Sağlam. "Furniture Design Education with 3D Printing Technology." In Makers at School, Educational Robotics and Innovative Learning Environments, 97–105. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77040-2_13.
Повний текст джерелаBattaglia, Christopher A., Martin Fields Miller, and Sasa Zivkovic. "Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures." In Robotic Fabrication in Architecture, Art and Design 2018, 242–55. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92294-2_19.
Повний текст джерелаBeyhan, Figen, and Semra Arslan Selçuk. "3D Printing in Architecture: One Step Closer to a Sustainable Built Environment." In Lecture Notes in Civil Engineering, 253–68. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-63709-9_20.
Повний текст джерелаТези доповідей конференцій з теми "3D printing architecture"
Zhan, Qiang, Hao Wu, Liming Zhang, Philip F. Yuan, and Tianyi Gao. "3D Concrete Printing with Variable Width Filament." In eCAADe 2021: Towards a New, Configurable Architecture. eCAADe, 2021. http://dx.doi.org/10.52842/conf.ecaade.2021.2.153.
Повний текст джерелаMarijnissen, Marjolein P. A. M., and Aant van der Zee. "3D Concrete Printing in Architecture - A research on the potential benefits of 3D Concrete Printing in Architecture." In eCAADe 2017 : ShoCK! – Sharing of Computable Knowledge! eCAADe, 2017. http://dx.doi.org/10.52842/conf.ecaade.2017.2.299.
Повний текст джерелаMarijnissen, Marjolein P. A. M., and Aant van der Zee. "3D Concrete Printing in Architecture - A research on the potential benefits of 3D Concrete Printing in Architecture." In eCAADe 2017 : ShoCK! – Sharing of Computable Knowledge! eCAADe, 2017. http://dx.doi.org/10.52842/conf.ecaade.2017.2.299.
Повний текст джерелаHennessey, Michael P., Alex J. Beaulier, and Cheri Shakiban. "Modeling and 3D Printing of Ruled Surfaces." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-46494.
Повний текст джерелаChen, Dechen, Dan Luo, Weiguo Xu, Chen Luo, Liren Shen, Xia Yan, and Tianjun Wang. "Re-perceive 3D printing with Artificial Intelligence." In eCAADe 2019: Architecture in the Age of the 4th Industrial Revolution. eCAADe, 2019. http://dx.doi.org/10.52842/conf.ecaade.2019.1.443.
Повний текст джерелаDunn, Kate, Hank Haeusler, Yannis Zavoleas, Mel Bishop, Katherine Dafforn, Francisco Sedano, Daniel Yu, and Nina Schaefer. "Recycled Sustainable 3D Printing Materials for Marine Environments." In eCAADe 2019: Architecture in the Age of the 4th Industrial Revolution. eCAADe, 2019. http://dx.doi.org/10.52842/conf.ecaade.2019.2.583.
Повний текст джерелаDunn, Kate, Hank Haeusler, Yannis Zavoleas, Mel Bishop, Katherine Dafforn, Francisco Sedano, Daniel Yu, and Nina Schaefer. "Recycled Sustainable 3D Printing Materials for Marine Environments." In eCAADe 2019: Architecture in the Age of the 4th Industrial Revolution. eCAADe, 2019. http://dx.doi.org/10.52842/conf.ecaade.2019.2.583.
Повний текст джерелаCavaliere, Ilaria, Angelo Vito Graziano, and Dario Costantino. "STEREOTOMIC GREEN VAULT: CLAY 3D PRINTING APPLIED TO STEREOTOMY." In DARCH 2022 November - 3rd International Conference on Architecture & Design. International Organization Center of Academic Research, 2022. http://dx.doi.org/10.46529/darch.202234.
Повний текст джерелаRen, Lei, Shicheng Wang, Yijun Shen, Shikai Hong, Yudi Chen, and Lin Zhang. "3D Printing in Cloud Manufacturing: Model and Platform Design." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8669.
Повний текст джерела"3D-Printing, Topology Optimization and Statistical Learning: A Case Study." In 2017 Symposium on Simulation for Architecture and Urban Design. Society for Modeling and Simulation International (SCS), 2017. http://dx.doi.org/10.22360/simaud.2017.simaud.012.
Повний текст джерелаЗвіти організацій з теми "3D printing architecture"
Williams, Michelle. Geomechanical Characterization of Geo-architectured Rock Specimens Using Gypsum-based 3D Printing. Office of Scientific and Technical Information (OSTI), December 2019. http://dx.doi.org/10.2172/1592887.
Повний текст джерелаVavrin, John L., Ghassan K. Al-Chaar, Eric L. Kreiger, Michael P. Case, Brandy N. Diggs, Richard J. Liesen, Justine Yu, et al. Automated Construction of Expeditionary Structures (ACES) : Energy Modeling. Engineer Research and Development Center (U.S.), February 2021. http://dx.doi.org/10.21079/11681/39641.
Повний текст джерелаDiggs, Brandy N., Richard J. Liesen, Michael P. Case, Sameer Hamoush, and Ahmed C. Megri. Automated Construction of Expeditionary Structures (ACES) : Energy Modeling. Engineer Research and Development Center (U.S.), February 2021. http://dx.doi.org/10.21079/11681/39759.
Повний текст джерелаAl-Chaar, Ghassan K., Peter B. Stynoski, Todd S. Rushing, Lynette A. Barna, Jedadiah F. Burroughs, John L. Vavrin, and Michael P. Case. Automated Construction of Expeditionary Structures (ACES) : Materials and Testing. Engineer Research and Development Center (U.S.), February 2021. http://dx.doi.org/10.21079/11681/39721.
Повний текст джерела