Статті в журналах з теми "3D printed high heels"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "3D printed high heels".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Naseri, Emad, Christopher Cartmell, Matthew Saab, Russell G. Kerr, and Ali Ahmadi. "Development of 3D Printed Drug-Eluting Scaffolds for Preventing Piercing Infection." Pharmaceutics 12, no. 9 (September 22, 2020): 901. http://dx.doi.org/10.3390/pharmaceutics12090901.
Повний текст джерелаFink, S., U. Fuhrmann, C. Lange, R. Mueller, and V. Zwecker. "3D Printed Cryogenic High Voltage Devices." IEEE Transactions on Applied Superconductivity 26, no. 3 (April 2016): 1–4. http://dx.doi.org/10.1109/tasc.2015.2512234.
Повний текст джерелаLiu, Dapeng, Chaoji Chen, Yubing Zhou, Yinhua Bao, Ruiliu Wang, Yu Liu, Shuaiming He, et al. "3D‐Printed, High‐Porosity, High‐Strength Graphite Aerogel." Small Methods 5, no. 7 (June 16, 2021): 2001188. http://dx.doi.org/10.1002/smtd.202001188.
Повний текст джерелаGao, Hongwei, George F. R. Chen, Peng Xing, Ju Won Choi, Hong Yee Low, and Dawn T. H. Tan. "High‐Resolution 3D Printed Photonic Waveguide Devices." Advanced Optical Materials 8, no. 18 (July 12, 2020): 2000613. http://dx.doi.org/10.1002/adom.202000613.
Повний текст джерелаHan, Guebum, Kanav Khosla, Kieran T. Smith, Xia Ouyang, Jiyong Lee, John C. Bischof, and Michael C. Mcalpine. "3D printed organisms for high-throughput cryopreservation." Cryobiology 109 (December 2022): 45. http://dx.doi.org/10.1016/j.cryobiol.2022.11.144.
Повний текст джерелаAbdalla, Aya, and Bhavik Anil Patel. "3D Printed Electrochemical Sensors." Annual Review of Analytical Chemistry 14, no. 1 (June 5, 2021): 47–63. http://dx.doi.org/10.1146/annurev-anchem-091120-093659.
Повний текст джерелаHassan, Md Sahid, Kazi Md Masum Billah, Samuel Ernesto Hall, Sergio Sepulveda, Jaime Eduardo Regis, Cory Marquez, Sergio Cordova, et al. "Selective Laser Sintering of High-Temperature Thermoset Polymer." Journal of Composites Science 6, no. 2 (January 24, 2022): 41. http://dx.doi.org/10.3390/jcs6020041.
Повний текст джерелаBehzadnezhad, Bahareh, Bruce D. Collick, Nader Behdad, and Alan B. McMillan. "Dielectric properties of 3D-printed materials for anatomy specific 3D-printed MRI coils." Journal of Magnetic Resonance 289 (April 2018): 113–21. http://dx.doi.org/10.1016/j.jmr.2018.02.013.
Повний текст джерелаDul, Sithiprumnea, Luca Fambri, and Alessandro Pegoretti. "High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances." Journal of Materials Engineering and Performance 30, no. 7 (April 19, 2021): 5066–85. http://dx.doi.org/10.1007/s11665-021-05635-1.
Повний текст джерелаMacDonald, Eric, Ryan Wicker, David Espalin, Andy Kwas, and Peter Ruby Craig Kief. "3D Printing of High Voltage Printed Wiring Boards." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2016, DPC (January 1, 2016): 000542–65. http://dx.doi.org/10.4071/2016dpc-ta34.
Повний текст джерелаNikolaou, Panayiotis, Aaron M. Coffey, Laura L. Walkup, Brogan M. Gust, Cristen D. LaPierre, Edward Koehnemann, Michael J. Barlow, Matthew S. Rosen, Boyd M. Goodson, and Eduard Y. Chekmenev. "A 3D-Printed High Power Nuclear Spin Polarizer." Journal of the American Chemical Society 136, no. 4 (January 21, 2014): 1636–42. http://dx.doi.org/10.1021/ja412093d.
Повний текст джерелаTaylor, Anthony P., and Luis F. Velásquez–García. "High-temperature compatible, monolithic, 3D-printed magnetic actuators." Journal of Physics: Conference Series 1052 (July 2018): 012046. http://dx.doi.org/10.1088/1742-6596/1052/1/012046.
Повний текст джерелаDonaldson, Laurie. "High-intensity ultrasound helps strengthen 3D printed alloys." Materials Today 34 (April 2020): 1. http://dx.doi.org/10.1016/j.mattod.2020.02.014.
Повний текст джерелаYuan, Shangqin, Chee Kai Chua, and Kun Zhou. "3D-Printed Mechanical Metamaterials with High Energy Absorption." Advanced Materials Technologies 4, no. 3 (December 4, 2018): 1800419. http://dx.doi.org/10.1002/admt.201800419.
Повний текст джерелаRahman, Md Taibur, Russell Moser, Hussein M. Zbib, C. V. Ramana, and Rahul Panat. "3D printed high performance strain sensors for high temperature applications." Journal of Applied Physics 123, no. 2 (January 14, 2018): 024501. http://dx.doi.org/10.1063/1.4999076.
Повний текст джерелаZhang, Han, Long Huang, Mingyue Tan, Shaoqing Zhao, Hua Liu, Zifeng Lu, Jinhuan Li, and Zhongzhu Liang. "Overview of 3D-Printed Silica Glass." Micromachines 13, no. 1 (January 3, 2022): 81. http://dx.doi.org/10.3390/mi13010081.
Повний текст джерелаMao, Yunhe, Yang Xiong, Qi Li, Gang Chen, Weili Fu, Xin Tang, Luxi Yang, and Jian Li. "3D-Printed Patient-Specific Instrumentation Technique Vs. Conventional Technique in Medial Open Wedge High Tibial Osteotomy: A Prospective Comparative Study." BioMed Research International 2020 (November 15, 2020): 1–10. http://dx.doi.org/10.1155/2020/1923172.
Повний текст джерелаEickenscheidt, Max, Michael Langenmair, Ahmad Dbouk, Dorit Nötzel, Thomas Hanemann, and Thomas Stieglitz. "3D-Printed Hermetic Alumina Housings." Materials 14, no. 1 (January 3, 2021): 200. http://dx.doi.org/10.3390/ma14010200.
Повний текст джерелаYin, Xiaohong, Xiaodong Wang, Yuan Fang, and Zhu Ding. "Influence of curing age on high-temperature properties of additive manufactured geopolymer mortar." E3S Web of Conferences 218 (2020): 03019. http://dx.doi.org/10.1051/e3sconf/202021803019.
Повний текст джерелаChitariu, Dragoş-Florin, and Adriana Munteanu. "Research on 3D printed fixture components." MATEC Web of Conferences 178 (2018): 02008. http://dx.doi.org/10.1051/matecconf/201817802008.
Повний текст джерелаPoyanco, Jose-Manuel, Francisco Pizarro, and Eva Rajo-Iglesias. "3D-Printing for Transformation Optics in Electromagnetic High-Frequency Lens Applications." Materials 13, no. 12 (June 13, 2020): 2700. http://dx.doi.org/10.3390/ma13122700.
Повний текст джерелаHong, Min-Ho, Bong Min, and Tea-Yub Kwon. "Fabricating High-Quality 3D-Printed Alloys for Dental Applications." Applied Sciences 7, no. 7 (July 10, 2017): 710. http://dx.doi.org/10.3390/app7070710.
Повний текст джерелаStrakosova, Angelina, Dalibor Vojtech, and Drahomír Dvorský. "Heat Treatment of High-Strength 3D-Printed Maraging Steel." Defect and Diffusion Forum 403 (September 2020): 67–73. http://dx.doi.org/10.4028/www.scientific.net/ddf.403.67.
Повний текст джерелаGong, Hua, Adam T. Woolley, and Gregory P. Nordin. "High density 3D printed microfluidic valves, pumps, and multiplexers." Lab on a Chip 16, no. 13 (2016): 2450–58. http://dx.doi.org/10.1039/c6lc00565a.
Повний текст джерелаJian, Jin Rong, Taeil Kim, Jae Sung Park, Jiacheng Wang, and Woo Soo Kim. "High performance 3D printed electronics using electroless plated copper." AIP Advances 7, no. 3 (March 2017): 035314. http://dx.doi.org/10.1063/1.4979173.
Повний текст джерелаBohr, Adam, Johan Boetker, Yingya Wang, Henrik Jensen, Jukka Rantanen, and Moritz Beck-Broichsitter. "High-Throughput Fabrication of Nanocomplexes Using 3D-Printed Micromixers." Journal of Pharmaceutical Sciences 106, no. 3 (March 2017): 835–42. http://dx.doi.org/10.1016/j.xphs.2016.10.027.
Повний текст джерелаWare, Henry Oliver T., Adam C. Farsheed, Banu Akar, Chongwen Duan, Xiangfan Chen, Guillermo Ameer, and Cheng Sun. "High-speed on-demand 3D printed bioresorbable vascular scaffolds." Materials Today Chemistry 7 (March 2018): 25–34. http://dx.doi.org/10.1016/j.mtchem.2017.10.002.
Повний текст джерелаManapat, Jill Z., Joey Dacula Mangadlao, Brylee David Buada Tiu, Grace C. Tritchler, and Rigoberto C. Advincula. "High-Strength Stereolithographic 3D Printed Nanocomposites: Graphene Oxide Metastability." ACS Applied Materials & Interfaces 9, no. 11 (March 10, 2017): 10085–93. http://dx.doi.org/10.1021/acsami.6b16174.
Повний текст джерелаSpano, Michael B., Brandan H. Tran, Sudipta Majumdar, and Gregory A. Weiss. "3D-Printed Labware for High-Throughput Immobilization of Enzymes." Journal of Organic Chemistry 85, no. 13 (June 5, 2020): 8480–88. http://dx.doi.org/10.1021/acs.joc.0c00789.
Повний текст джерелаMendes, Diogo, David Sousa, Ana C. Cerdeira, Laura C. J. Pereira, Ana Marques, João Murta-Pina, Anabela Pronto, and Isabel Ferreira. "Low-cost and high-performance 3D printed YBCO superconductors." Ceramics International 47, no. 1 (January 2021): 381–87. http://dx.doi.org/10.1016/j.ceramint.2020.08.143.
Повний текст джерелаBone, Jennifer M., Christopher M. Childs, Aditya Menon, Barnabás Póczos, Adam W. Feinberg, Philip R. LeDuc, and Newell R. Washburn. "Hierarchical Machine Learning for High-Fidelity 3D Printed Biopolymers." ACS Biomaterials Science & Engineering 6, no. 12 (November 20, 2020): 7021–31. http://dx.doi.org/10.1021/acsbiomaterials.0c00755.
Повний текст джерелаSo, Kwok, Kwai Luk, Chi Chan, and Ka Chan. "3D Printed High Gain Complementary Dipole/Slot Antenna Array." Applied Sciences 8, no. 8 (August 20, 2018): 1410. http://dx.doi.org/10.3390/app8081410.
Повний текст джерелаTridas, Eric Miguel, Christopher Allemang, Fabian Mast, J. Mark Anthony, and Rudiger Schlaf. "High transmission 3D printed flex-PCB-based ion funnel." Journal of Mass Spectrometry 50, no. 7 (June 8, 2015): 938–43. http://dx.doi.org/10.1002/jms.3606.
Повний текст джерелаHuang, Wenhua, Caine Finnerty, Rebecca Sharp, Kang Wang, and Brandon Balili. "High-Performance 3D Printed Microtubular Solid Oxide Fuel Cells." Advanced Materials Technologies 2, no. 4 (February 13, 2017): 1600258. http://dx.doi.org/10.1002/admt.201600258.
Повний текст джерелаChen, He, Xiaodan Miao, Hongguang Lu, Shihai Liu, and Zhuoqing Yang. "High-Efficiency 3D-Printed Three-Chamber Electromagnetic Peristaltic Micropump." Micromachines 14, no. 2 (January 19, 2023): 257. http://dx.doi.org/10.3390/mi14020257.
Повний текст джерелаAbdallah, Yomna K., and Alberto T. Estévez. "3D-Printed Biodigital Clay Bricks." Biomimetics 6, no. 4 (October 7, 2021): 59. http://dx.doi.org/10.3390/biomimetics6040059.
Повний текст джерелаShetty, Sandeep, Nandish B. T., Vivek Amin, Pooja Harish, Stanly Selva Kumar, and Shahira. "Evaluation of 3D printed PEEK and other 3D printed biocompatible materials as healthcare devices." Biomedicine 42, no. 5 (November 14, 2022): 956–60. http://dx.doi.org/10.51248/.v42i5.1959.
Повний текст джерелаAbdallah, Ali, Manfred Pauritsch, Christian Gasser, Florian Stangl, Matthias Primas, and Udo Traussnigg. "3D Printed Capacitive Fluid Level Sensor." Proceedings 2, no. 13 (November 21, 2018): 861. http://dx.doi.org/10.3390/proceedings2130861.
Повний текст джерелаChowdhury, Maqsud R., James Steffes, Bryan D. Huey, and Jeffrey R. McCutcheon. "3D printed polyamide membranes for desalination." Science 361, no. 6403 (August 16, 2018): 682–86. http://dx.doi.org/10.1126/science.aar2122.
Повний текст джерелаTuazon, Brian Jumaquio, Michaela Tayag Espino, and John Ryan Cortez Dizon. "Investigation on the Effects of Acetone Vapor-Polishing to Fracture Behavior of ABS Printed Materials at Different Operating Temperature." Materials Science Forum 1005 (August 2020): 141–49. http://dx.doi.org/10.4028/www.scientific.net/msf.1005.141.
Повний текст джерелаChoo, Sangmin, SungGiu Jin, and JaeHwan Jung. "Fabricating High-Resolution and High-Dimensional Microneedle Mold through the Resolution Improvement of Stereolithography 3D Printing." Pharmaceutics 14, no. 4 (March 31, 2022): 766. http://dx.doi.org/10.3390/pharmaceutics14040766.
Повний текст джерелаSimonsen, Erik B., Morten B. Svendsen, Andreas Nørreslet, Henrik K. Baldvinsson, Thomas Heilskov-Hansen, Peter K. Larsen, Tine Alkjær, and Marius Henriksen. "Walking on High Heels Changes Muscle Activity and the Dynamics of Human Walking Significantly." Journal of Applied Biomechanics 28, no. 1 (February 2012): 20–28. http://dx.doi.org/10.1123/jab.28.1.20.
Повний текст джерелаMohan, Denesh, Mohd Shaiful Sajab, Saiful Bahari Bakarudin, Rasidi Bin Roslan, and Hatika Kaco. "3D Printed Polyurethane Reinforced Graphene Nanoplatelets." Materials Science Forum 1025 (March 2021): 47–52. http://dx.doi.org/10.4028/www.scientific.net/msf.1025.47.
Повний текст джерелаYin, Xiang-Yu, Yue Zhang, Xiaobing Cai, Qiuquan Guo, Jun Yang, and Zhong Lin Wang. "3D printing of ionic conductors for high-sensitivity wearable sensors." Materials Horizons 6, no. 4 (2019): 767–80. http://dx.doi.org/10.1039/c8mh01398e.
Повний текст джерелаGarcia, Rey Farly, and Alvin Chua. "HIGH COMPRESSIVE STRENGTH 3D PRINTED INFILL BASED ON STRUT-BASED LATTICE STRUCTURE." ASEAN Engineering Journal 12, no. 4 (November 29, 2022): 89–94. http://dx.doi.org/10.11113/aej.v12.17813.
Повний текст джерелаUtzeri, Mattia, Emanuele Farotti, Mattia Coccia, Edoardo Mancini, and Marco Sasso. "High strain rate compression behaviour of 3D printed Carbon-PA." Journal of Materials Research 36, no. 10 (May 27, 2021): 2083–93. http://dx.doi.org/10.1557/s43578-021-00248-9.
Повний текст джерелаTagliaferri, Stefano, Nagaraju Goli, Apostolos Panagiotopoulos, Mauro Och, Gang Cheng, and Cecilia Mattevi. "Pristine Graphene Inks for 3D Printed Supercapacitors with High Capacitance." ECS Meeting Abstracts MA2021-02, no. 49 (October 19, 2021): 1472. http://dx.doi.org/10.1149/ma2021-02491472mtgabs.
Повний текст джерелаCraton, Michael, Mohd Ifwat Mohd Ghazali, Brian Wright, Kyoung Youl Park, Premjeet Chahal, and John Papapolymerou. "3D Printed Integrated Microfluidic Cooling for High Power RF Applications." International Symposium on Microelectronics 2017, no. 1 (October 1, 2017): 000675–80. http://dx.doi.org/10.4071/isom-2017-poster6_098.
Повний текст джерелаHu, Guohong, Fengli Huang, Chengli Tang, Jinmei Gu, Zhiheng Yu, and Yun Zhao. "High-Performance Flexible Piezoresistive Pressure Sensor Printed with 3D Microstructures." Nanomaterials 12, no. 19 (September 29, 2022): 3417. http://dx.doi.org/10.3390/nano12193417.
Повний текст джерелаGong, Hua, Adam T. Woolley, and Gregory P. Nordin. "3D printed high density, reversible, chip-to-chip microfluidic interconnects." Lab on a Chip 18, no. 4 (2018): 639–47. http://dx.doi.org/10.1039/c7lc01113j.
Повний текст джерела