Добірка наукової літератури з теми "3D printed high heels"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "3D printed high heels".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "3D printed high heels"
Naseri, Emad, Christopher Cartmell, Matthew Saab, Russell G. Kerr, and Ali Ahmadi. "Development of 3D Printed Drug-Eluting Scaffolds for Preventing Piercing Infection." Pharmaceutics 12, no. 9 (September 22, 2020): 901. http://dx.doi.org/10.3390/pharmaceutics12090901.
Повний текст джерелаFink, S., U. Fuhrmann, C. Lange, R. Mueller, and V. Zwecker. "3D Printed Cryogenic High Voltage Devices." IEEE Transactions on Applied Superconductivity 26, no. 3 (April 2016): 1–4. http://dx.doi.org/10.1109/tasc.2015.2512234.
Повний текст джерелаLiu, Dapeng, Chaoji Chen, Yubing Zhou, Yinhua Bao, Ruiliu Wang, Yu Liu, Shuaiming He, et al. "3D‐Printed, High‐Porosity, High‐Strength Graphite Aerogel." Small Methods 5, no. 7 (June 16, 2021): 2001188. http://dx.doi.org/10.1002/smtd.202001188.
Повний текст джерелаGao, Hongwei, George F. R. Chen, Peng Xing, Ju Won Choi, Hong Yee Low, and Dawn T. H. Tan. "High‐Resolution 3D Printed Photonic Waveguide Devices." Advanced Optical Materials 8, no. 18 (July 12, 2020): 2000613. http://dx.doi.org/10.1002/adom.202000613.
Повний текст джерелаHan, Guebum, Kanav Khosla, Kieran T. Smith, Xia Ouyang, Jiyong Lee, John C. Bischof, and Michael C. Mcalpine. "3D printed organisms for high-throughput cryopreservation." Cryobiology 109 (December 2022): 45. http://dx.doi.org/10.1016/j.cryobiol.2022.11.144.
Повний текст джерелаAbdalla, Aya, and Bhavik Anil Patel. "3D Printed Electrochemical Sensors." Annual Review of Analytical Chemistry 14, no. 1 (June 5, 2021): 47–63. http://dx.doi.org/10.1146/annurev-anchem-091120-093659.
Повний текст джерелаHassan, Md Sahid, Kazi Md Masum Billah, Samuel Ernesto Hall, Sergio Sepulveda, Jaime Eduardo Regis, Cory Marquez, Sergio Cordova, et al. "Selective Laser Sintering of High-Temperature Thermoset Polymer." Journal of Composites Science 6, no. 2 (January 24, 2022): 41. http://dx.doi.org/10.3390/jcs6020041.
Повний текст джерелаBehzadnezhad, Bahareh, Bruce D. Collick, Nader Behdad, and Alan B. McMillan. "Dielectric properties of 3D-printed materials for anatomy specific 3D-printed MRI coils." Journal of Magnetic Resonance 289 (April 2018): 113–21. http://dx.doi.org/10.1016/j.jmr.2018.02.013.
Повний текст джерелаDul, Sithiprumnea, Luca Fambri, and Alessandro Pegoretti. "High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances." Journal of Materials Engineering and Performance 30, no. 7 (April 19, 2021): 5066–85. http://dx.doi.org/10.1007/s11665-021-05635-1.
Повний текст джерелаMacDonald, Eric, Ryan Wicker, David Espalin, Andy Kwas, and Peter Ruby Craig Kief. "3D Printing of High Voltage Printed Wiring Boards." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2016, DPC (January 1, 2016): 000542–65. http://dx.doi.org/10.4071/2016dpc-ta34.
Повний текст джерелаДисертації з теми "3D printed high heels"
BOLORTUYA, Damdinsuren. "Portable X-Ray Fluorescence Spectrometer with High Sensitivity." Kyoto University, 2019. http://hdl.handle.net/2433/242503.
Повний текст джерелаWU, CHENG-YAN, and 吳承彥. "Study on High Methoxyl Pectin Based Matrix for 3D Printed Food and its Printing Parameters." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/24sajf.
Повний текст джерела東海大學
食品科學系
107
3D food printing technology is one of the most popular technologies now today, which main purpose is to print food materials with a three-dimensional structure through a 3D printing machine. In this experiment, high methoxyl pectin was used as substrate, pectin jelly candy was printed by using 3D printing technology. Investigate the effects different concentrations of pectin solution of 10-16 %(w/v) on the printing of pectin jelly candy by 3D printing. The results showed that the water activity of the pectin jelly candy in different pectin concentrations were lower than that of the general microbial growth, which water content was less than 25 % when pectin was added more than 12 % (w/v). The rheological property results showed that the viscosity of each pectin jelly candy decreased when the shear rate increased, where shear thinning fluid were indicated by means of the material could be extruded easily. Pectin jelly candy with 14 %(w/v) had better storage modulus and loss modulus, was no obvious structural collapse on the printed product that; Maintaining a good target pattern and graphic height. Printer parameters of nozzle height of 1.5 mm, the extrusion rate of 0.030 cm3/s, the printed layer height is 1.5 mm, nozzle moving speed of 10 mm/s, and the nozzle diameter of 2 mm, showed no obvious structural collapse while maintaining good target pattern and pattern height. In physical property analysis, 14 % (w/v) pectin jelly candy showed better cohesiveness and springiness, than the other. For preservation analysis, pectin jelly candy stored 0 to 2 days showed a significant decrease in height, whereas no significant difference showed between 3 to 6 days. The water activity showed same trend with the height of stored pectin jelly candy, where no significant difference after the fourth day. In conclusion, when 14 % (w/v) pectin jelly candy, appropriate printer parameter conditions were used, a finer pattern and; target product height could be printed.
Sadia, M., Abdullah Isreb, I. Abbadi, Mohammad Isreb, D. Aziz, A. Selo, P. Timmins, and M. A. Alhnan. "From ‘fixed dose combinations’ to ‘a dynamic dose combiner’: 3D printed bi-layer antihypertensive tablets." 2018. http://hdl.handle.net/10454/17413.
Повний текст джерелаThere is an increased evidence for treating hypertension by a combination of two or more drugs. Increasing the number of daily intake of tablets has been reported to negatively affect the compliance of patients. Therefore, numerous fixed dose combinations (FDCs) have been introduced to the market. However, the inherent rigid nature of FDCs does not allow the titration of the dose of each single component for an individual patient's needs. In this work, flexible dose combinations of two anti-hypertensive drugs in a single bilayer tablet with a range of doses were fabricated using dual fused deposition modelling (FDM) 3D printer. Enalapril maleate (EM) and hydrochlorothiazide (HCT) loaded filaments were produced via hot-melt extrusion (HME). Computer software was utilised to design sets of oval bi-layer tablets of individualised doses. Thermal analysis and x-ray diffractometer (XRD) indicated that HCT remained crystalline in the polymeric matrix whilst EM appeared to be in an amorphous form. The interaction between anionic EM and cationic methacrylate polymer may have contributed to a drop in the glass transition temperature (Tg) of the filament and obviated the need for a plasticiser. Across all tablet sets, the methacrylate polymeric matrix provided immediate drug release profiles. This dynamic dosing system maintained the advantages of FDCs while providing a superior flexibility of dosing range, hence offering an optimal clinical solution to hypertension therapy in a patient-centric healthcare service.
Chen, Wei-Cheng, and 陳韋誠. "3D-Printed, TiO2 NP–Incorporated Minicolumn Coupled with ICP-MS for Speciation of Inorganic As, Cr, and Se in High-Salt-Content Samples." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/42pdqn.
Повний текст джерела國立臺灣海洋大學
生命科學暨生物科技學系
106
To extend the applicability of solid phase extraction devices manufactured by 3D printing technologies, a stereolithographic 3D printer and the resin incorporated with titanium dioxide nanoparticles (TiO2 NPs) were utilized to fabricate a demountable minicolunm with the TiO2 NP–incorporated packing as a sample pretreatment device to selectively extract inorganic Cr, As, and Se species in high-salt-content samples and facilitate their analyses when hyphenating to an inductively coupled plasma mass spectrometer. After method’s optimization, the proposed automatic system can enable highly sensitive determination of Cr, As, and Se species with the method’s detection limits as low as 0.053–0.083 µg L-1 for Cr, 0.004–0.033 µg L-1 for As, and 0.061–0.128 µg L-1 for Se, respectively. To confirm the method’s analytical reliability, the analyses of the reference materials 1643f, SLEW-3, CASS-4, and 2670a as well as the spike analyses of the collected water samples and human urine were performed. Our results suggested that the developed 3D-printed minicolumn is practically useful for speciation of these elements in high-salt-content samples, and to adequately incorporate active nanomaterials into the raw printing resins can enable 3DP technologies not only to fabricate functionalized devices for more diverse sample pretreatment applications but also to continuously contribute to the future development of multifunctional devices for analytical sciences.
Книги з теми "3D printed high heels"
Jo, Sam. Games 8 in 1 All Ages: Printed on High-Quality Paper, Hangman, Captain's Mistress, Dots & Boxes, Tec Tac Toe, Tec Tac Toe 3D, Warships, Mash, Hexagon Game. Independently Published, 2019.
Знайти повний текст джерелаJo, Sam. Tec Tac Toe & More Games 8 in 1 All Ages: Printed on High-Quality Paper, Hangman, Captain's Mistress, Dots & Boxes, Tec Tac Toe, Tec Tac Toe 3D, Warships, Mash, Hexagon Game. Independently Published, 2019.
Знайти повний текст джерелаJo, Sam. Tec Tac Toe & More Games 8 in 1 All Ages: Printed on High-Quality Paper, Hangman, Captain's Mistress, Dots & Boxes, Tec Tac Toe, Tec Tac Toe 3D, Warships, Mash, Hexagon Game. Independently Published, 2019.
Знайти повний текст джерелаJo, Sam. Tec Tac Toe & More Games 8 in 1 All Ages: Printed on High-Quality Paper, Hangman, Captain's Mistress, Dots & Boxes, Tec Tac Toe, Tec Tac Toe 3D, Warships, Mash, Hexagon Game. Independently Published, 2019.
Знайти повний текст джерелаJo, Sam. Tec Tac Toe & More Games 8 in 1 All Ages: Printed on High-Quality Paper, Hangman, Captain's Mistress, Dots & Boxes, Tec Tac Toe, Tec Tac Toe 3D, Warships, Mash, Hexagon Game. Independently Published, 2019.
Знайти повний текст джерелаJo, Sam. Tec Tac Toe & More Games 8 in 1 All Ages: Printed on High-Quality Paper, Hangman, Captain's Mistress, Dots & Boxes, Tec Tac Toe, Tec Tac Toe 3D, Warships, Mash, Hexagon Game. Independently Published, 2019.
Знайти повний текст джерелаЧастини книг з теми "3D printed high heels"
Marzola, Antonio, Elisa Mussi, and Francesca Uccheddu. "3D Printed Materials for High Temperature Applications." In Lecture Notes in Mechanical Engineering, 936–47. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31154-4_80.
Повний текст джерелаEbenezer, Nitla Stanley, B. Vinod, Angajala Ramakrishna, and Hanumanthu Satya Jagadesh. "Processing, Applications, and Challenges of 3D Printed Polymer Nanocomposites." In High-Performance Composite Structures, 93–124. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-7377-1_5.
Повний текст джерелаSasso, Marco, Edoardo Mancini, Mattia Utzeri, Gianluca Chiappini, Daniele Cortis, Donato Orlandi, and Luca Di Angelo. "High-Strain-Rate Behavior of 3D-Printed CuCrZr." In Dynamic Behavior of Materials, Volume 1, 85–91. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-17453-7_13.
Повний текст джерелаMartens, Pascal, Maarten Mathot, Freek Bos, and Jeroen Coenders. "Optimising 3D Printed Concrete Structures Using Topology Optimisation." In High Tech Concrete: Where Technology and Engineering Meet, 301–9. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-59471-2_37.
Повний текст джерелаvan Wolfswinkel, Jan C., Wim van ‘t Land, Herke Stuit, Guido Bastiaens, Lucas Ter Hall, Wessel van Beerendonk, Theo Voogd, and Mustapha M. Attahiri. "Design Process of a 3D-Printed Concrete Water Taxi Stop." In High Tech Concrete: Where Technology and Engineering Meet, 2702–9. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-59471-2_307.
Повний текст джерелаMa, Quanjin, M. R. M. Rejab, Muammel M. Hanon, M. S. Idris, and J. P. Siregar. "3D-Printed Spherical-Roof Contoured-Core (SRCC) Composite Sandwich Structures for Aerospace Applications." In High-Performance Composite Structures, 75–91. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-7377-1_4.
Повний текст джерелаShkundalova, O., T. Molkens, M. Classen, and B. Rossi. "Characterization of 3D printed concrete beams after exposure to high temperature." In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems, 133–34. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003348450-62.
Повний текст джерелаSanborn, Brett, Devesh Mistry, Bo Song, Kai Yu, Kevin Long, and Christopher M. Yakacki. "High Strain Rate Compressive Behavior of 3D Printed Liquid Crystal Elastomers." In Dynamic Behavior of Materials, Volume 1, 39–41. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-17453-7_6.
Повний текст джерелаShkundalova, O., T. Molkens, M. Classen, and B. Rossi. "Characterization of 3D printed concrete beams after exposure to high temperature." In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems, 380–86. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003348443-62.
Повний текст джерелаMohamed, H., D. W. Bao, and R. Snooks. "Super Composite: Carbon Fibre Infused 3D Printed Tectonics." In Proceedings of the 2020 DigitalFUTURES, 297–308. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4400-6_28.
Повний текст джерелаТези доповідей конференцій з теми "3D printed high heels"
Harmon, Aaron, Victor Khilkevich, and Kristen M. Donnell. "High Permittivity Anisotropic 3D Printed Material." In 2022 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI). IEEE, 2022. http://dx.doi.org/10.1109/emcsi39492.2022.9889552.
Повний текст джерелаHoel, Karina Vieira, Trond Hellum, and Stein Kristoffersen. "High power properties of 3D printed antennas." In 2016 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, 2016. http://dx.doi.org/10.1109/aps.2016.7696120.
Повний текст джерелаSadeqi, Aydin, Hojatollah Rezaei Nejad, and Sameer Sonkusale. "3D printed metamaterials for high-frequency applications." In Terahertz, RF, Millimeter, and Submillimeter-Wave Technology and Applications XII, edited by Laurence P. Sadwick and Tianxin Yang. SPIE, 2019. http://dx.doi.org/10.1117/12.2503932.
Повний текст джерелаJacquet, Jean-Rene, Franck Levassort, Frederic Ossant, and Jean-Marc Gregoire. "3D printed phantom for high frequency ultrasound imaging." In 2015 IEEE International Ultrasonics Symposium (IUS). IEEE, 2015. http://dx.doi.org/10.1109/ultsym.2015.0487.
Повний текст джерелаAbdin, Mohamed M., Juan Castro, Jing Wang, and Thomas Weller. "Miniaturized 3D printed balun using high-k composites." In 2015 IEEE 16th Annual Wireless and Microwave Technology Conference (WAMICON). IEEE, 2015. http://dx.doi.org/10.1109/wamicon.2015.7120428.
Повний текст джерелаParaskevopoulos, Anastasios, Ilir Gashi, Matteo Albani, and Stefano Maci. "High aperture efficiency 3D-printed radial GRIN lens." In 2022 16th European Conference on Antennas and Propagation (EuCAP). IEEE, 2022. http://dx.doi.org/10.23919/eucap53622.2022.9769646.
Повний текст джерелаAl Takach, Ali, Fabien Ndagijimana, Jalal Jomaah, and Mohammed Al-Husseini. "3D-Printed Low-Cost and Lightweight TEM Cell." In 2018 International Conference on High Performance Computing & Simulation (HPCS). IEEE, 2018. http://dx.doi.org/10.1109/hpcs.2018.00022.
Повний текст джерелаGhazali, Mohd Ifwat Mohd, Kyoung Youl Park, Jennifer A. Byford, John Papapolymerou, and Premjeet Chahal. "3D printed metalized-polymer UWB high-gain Vivaldi antennas." In 2016 IEEE/MTT-S International Microwave Symposium (IMS). IEEE, 2016. http://dx.doi.org/10.1109/mwsym.2016.7540075.
Повний текст джерелаCraton, Michael, Jennifer A. Byford, Vincens Gjokaj, John Papapolymerou, and Premjeet Chahal. "3D Printed High Frequency Coaxial Transmission Line Based Circuits." In 2017 IEEE 67th Electronic Components and Technology Conference (ECTC). IEEE, 2017. http://dx.doi.org/10.1109/ectc.2017.180.
Повний текст джерелаSchenato, L., Q. Rong, Z. Shao, X. Qiao, A. Galtarossa, A. Pasuto, and L. Palmieri. "Ultra-high-sensitivity 3D-printed FBG-based pressure sensor." In Optical Fiber Sensors. Washington, D.C.: OSA, 2018. http://dx.doi.org/10.1364/ofs.2018.wf88.
Повний текст джерелаЗвіти організацій з теми "3D printed high heels"
Kennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams, and Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), April 2022. http://dx.doi.org/10.21079/11681/43980.
Повний текст джерелаMartin, Kathi, Nick Jushchyshyn, and Claire King. Christian Lacroix Evening gown c.1990. Drexel Digital Museum, 2017. http://dx.doi.org/10.17918/wq7d-mc48.
Повний текст джерела