Добірка наукової літератури з теми "3D printed foam"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "3D printed foam".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "3D printed foam"
Chen, Qiyi, Jiayu Zhao, Jingbo Ren, Lihan Rong, Peng‐Fei Cao, and Rigoberto C. Advincula. "3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam." Advanced Functional Materials 29, no. 23 (April 4, 2019): 1900469. http://dx.doi.org/10.1002/adfm.201900469.
Повний текст джерелаBharath, H. S., Akshay Sawardekar, Sunil Waddar, P. Jeyaraj, and Mrityunjay Doddamani. "Mechanical behavior of 3D printed syntactic foam composites." Composite Structures 254 (December 2020): 112832. http://dx.doi.org/10.1016/j.compstruct.2020.112832.
Повний текст джерелаLappan, Tobias, Alexander Franz, Holger Schwab, Uta Kühn, Sven Eckert, Kerstin Eckert, and Sascha Heitkam. "X-ray particle tracking velocimetry in liquid foam flow." Soft Matter 16, no. 8 (2020): 2093–103. http://dx.doi.org/10.1039/c9sm02140j.
Повний текст джерелаYan, Leilei, Keyu Zhu, Yunwei Zhang, Chun Zhang, and Xitao Zheng. "Effect of Absorbent Foam Filling on Mechanical Behaviors of 3D-Printed Honeycombs." Polymers 12, no. 9 (September 10, 2020): 2059. http://dx.doi.org/10.3390/polym12092059.
Повний текст джерелаPathipaka, Ranjith Kumar, Kiran Kumar Namala, Nagasrisaihari Sunkara, and Chennakesava Rao Bandaru. "Damage characterization of sandwich composites subjected to impact loading." Journal of Sandwich Structures & Materials 22, no. 7 (August 16, 2018): 2125–38. http://dx.doi.org/10.1177/1099636218792717.
Повний текст джерелаPatil, Balu, B. R. Bharath Kumar, and Mrityunjay Doddamani. "Compressive behavior of fly ash based 3D printed syntactic foam composite." Materials Letters 254 (November 2019): 246–49. http://dx.doi.org/10.1016/j.matlet.2019.07.080.
Повний текст джерелаMustapha, Khairul Azhar, Fadhilah Shikh Anuar, and Fatimah Al-Zahrah Mohd Saat. "Prediction of Slip Velocity at the Interface of Open-Cell Metal Foam Using 3D Printed Foams." Colloids and Interfaces 6, no. 4 (December 12, 2022): 80. http://dx.doi.org/10.3390/colloids6040080.
Повний текст джерелаMarquez-Montes, Raul A., Kenta Kawashima, Yoon Jun Son, Jason A. Weeks, H. Hohyun Sun, Hugo Celio, Víctor H. Ramos-Sánchez, and C. Buddie Mullins. "Mass transport-enhanced electrodeposition of Ni–S–P–O films on nickel foam for electrochemical water splitting." Journal of Materials Chemistry A 9, no. 12 (2021): 7736–49. http://dx.doi.org/10.1039/d0ta12097a.
Повний текст джерелаMcDonald-Wharry, John, Maedeh Amirpour, Kim L. Pickering, Mark Battley, and Yejun Fu. "Moisture sensitivity and compressive performance of 3D-printed cellulose-biopolyester foam lattices." Additive Manufacturing 40 (April 2021): 101918. http://dx.doi.org/10.1016/j.addma.2021.101918.
Повний текст джерелаZhao, Jian, Amir Kordijazi, Colin Valensa, Hathibelagal Roshan, Yugg Kolhe, and Pradeep K. Rohatgi. "Behavior of Steel Foam Sandwich Members Cast with 3D Printed Sand Cores." JOM 74, no. 5 (January 31, 2022): 2083–93. http://dx.doi.org/10.1007/s11837-022-05157-8.
Повний текст джерелаДисертації з теми "3D printed foam"
Lundström, Nils. "Tillverkning av mannekänghuvud i fiberkompositmed 3D-printad form." Thesis, KTH, Skolan för teknikvetenskap (SCI), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-230686.
Повний текст джерелаThe purpose of this project is to develop a well-functioning method for producing a complex form in fiber composite from a 3D-printed mold. The chosen shape to use as a model is a mannequin head. The entire manufacturing process is described in this report. In short, the manufacturing process can be divided into a few different steps. First, 3D scanning of a model takes place to obtain a dot cloud that can be used to design a cast mold with. Then, this mold was 3D printed. Furthermore, the 3D printed mold needs surface treatment to prepare for manufacture of a composite item. The choice of release agent must also be done to allow the composite to be separated from the 3D-printed mold. Then, the production of a composite component follows using these three methods; hand lamination, vacuum infusion and laminating with low temperature prepreg. Lastly, the manufactured item must be treated after being molded with for example additional surface treatment or painting. All combinations of possibilities in all of these stages of manufacturing are too many to be tested, but some selected experiments were performed with different materials, release agents, manufacturing methods and surface treatments. The result of this project is that a well-functioning method is to make the 3D printed mold in PLA, smooth the surface with sandpaper, use a polyvinyl alcohol-based release agent and make the composite particle with vinyl ester as resin by performing a vacuum infusion. The work also includes suggestions for improvements in the different steps of the manufacturing process.
Pasaribu, Norman Mario, and 潘諾曼. "Real Form Creation of Mathematical Functions Via Software and 3D Printers." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/77095803437114000823.
Повний текст джерела東海大學
應用數學系
104
This thesis studies on the processing of using 3D printers to generate the real 3D solid object corresponding to a given mathematical function. First of all, the surface object of the mathematical function should be generated by using commercial mathematical software like Mathematica, Maple, Matlab, or free mathematical modeling software such as MathMod, K3DSurf etc. Later on the object file is sent to the free software Blender or Netfabb for adding the thickness to the surface with output as a STL file. Finally, the specified 3D printer’s software reads in the STL file and drives the 3D printer to form the solid object. The possible difficulties during this procedure and efficiency comparison between mathematical software in generating the surface object are also clarified such that the interested person can get in very quickly. Keywords: Geometry, 3D modeling, mathematical functions, STL file format, solid object
Частини книг з теми "3D printed foam"
Lu, Wei-Yang. "Compression and Shear Response of 3D Printed Foam Pads." In Mechanics of Additive and Advanced Manufacturing, Volume 8, 21–24. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95083-9_4.
Повний текст джерелаMosse, A. F., and J. F. Bassereau. "Material probes into paper waste as a bacterially-induced and 3D printed foam: Combining biodesign and circular principles." In Structures and Architecture A Viable Urban Perspective?, 51–58. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003023555-7.
Повний текст джерелаAlima, N., R. Snooks, and J. McCormack. "Bio Scaffolds." In Proceedings of the 2021 DigitalFUTURES, 316–29. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5983-6_29.
Повний текст джерелаÖzdemir, E., L. Kiesewetter, K. Antorveza, T. Cheng, S. Leder, D. Wood, and A. Menges. "Towards Self-shaping Metamaterial Shells:." In Proceedings of the 2021 DigitalFUTURES, 275–85. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5983-6_26.
Повний текст джерелаFlowers, Jim. "Using 3D Printers to Engage Students in Research." In Interdisciplinary and International Perspectives on 3D Printing in Education, 50–69. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-7018-9.ch003.
Повний текст джерелаSears, Victoria, and Jonathan Morris. "Anatomical Modeling at the Point of Care." In Additive Manufacturing in Biomedical Applications, 390–401. ASM International, 2022. http://dx.doi.org/10.31399/asm.hb.v23a.a0006896.
Повний текст джерелаAngelopoulos, Panagiotis, Efthalia Solomou, and Alexandros Balatsoukas. "The CCAP Project." In Research Anthology on Makerspaces and 3D Printing in Education, 305–37. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-6684-6295-9.ch016.
Повний текст джерелаAngelopoulos, Panagiotis, Efthalia Solomou, and Alexandros Balatsoukas. "The CCAP Project." In Advances in Early Childhood and K-12 Education, 392–424. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-4576-8.ch016.
Повний текст джерелаRandermann, Marcel, Timo Hinrichs, and Roland Jochem. "Development of a Quality Gate Reference Model for FDM Processes." In Quality Control [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.104176.
Повний текст джерелаMurphy, Caroline A., Cesar R. Alcala-Orozco, Alessia Longoni, Tim B. F. Woodfield, and Khoon S. Lim. "Vat Polymerization." In Additive Manufacturing in Biomedical Applications, 39–47. ASM International, 2022. http://dx.doi.org/10.31399/asm.hb.v23a.a0006882.
Повний текст джерелаТези доповідей конференцій з теми "3D printed foam"
BHARATH, H. S., PAVANA PRABHAKAR, SUHASINI GURURAJA, and MRITYUNAJY DODDAMANI. "Compressive Behavior of 3D Printed Foam." In American Society for Composites 2020. Lancaster, PA: DEStech Publications, Inc., 2020. http://dx.doi.org/10.12783/asc35/34842.
Повний текст джерелаGE, CHANGFENG, DENIS CORMIER, and BRIAN RICE. "Damping and Cushioning Characteristics of a Polyjet 3D Printed Photopolymer Kelvin Foam." In The 21st IAPRI World Conference on Packaging. Lancaster, PA: DEStech Publications, Inc., 2018. http://dx.doi.org/10.12783/iapri2018/24376.
Повний текст джерелаRighetti, Giulia, Michele Calati, Claudio Zilio, and Simone Mancin. "Experimental and Numerical Analyses of Pressure Drops In A 3D Printed Foam." In The 7th World Congress on Momentum, Heat and Mass Transfer. Avestia Publishing, 2022. http://dx.doi.org/10.11159/icmfht22.179.
Повний текст джерелаTEWANI, H. R., DILEEP BONTHU, H. S. BHARATH, MRITYUNJAY DODDAMANI, and P. PRABHAKAR. "DYNAMIC IMPACT RESISTANCE OF COMPOSITE SANDWICH PANELS WITH 3-D PRINTED POLYMER SYNTACTIC FOAM CORES." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35799.
Повний текст джерелаDavis, Bruce A., Richard A. Hagen, Robert J. McCandless, Eric L. Christiansen, and Dana M. Lear. "Hypervelocity impact performance of 3D printed aluminum panels." In 2019 15th Hypervelocity Impact Symposium. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/hvis2019-055.
Повний текст джерелаAmin, Anish Ravindra, Yi-Tang Kao, Bruce L. Tai, and Jyhwen Wang. "Dynamic Response of 3D-Printed Bi-Material Structure Using Drop Weight Impact Test." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-3061.
Повний текст джерелаTEWANI, H. R., MEGAN HINAUS, and PAVANA PRABHAKAR. "ADDITIVE MANUFACTURING AND MECHANICS OF MULTISCALE ARCHITECTED FLEXIBLE SYNTACTIC FOAMS." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36452.
Повний текст джерелаLane, Kerry V., Nathan K. Yasuda, Michael E. Lo, Emily R. Mather, and Frank J. Shih. "Experimental Characterization of Low Velocity Impact Energy Dissipation in Sandwich Composites With Porous Cores With Tailored Structure and Morphology." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67901.
Повний текст джерелаEmeigh, Carson, Haipeng Zhang, and Sangjin Ryu. "Fabrication of a Microfluidic Cell Compressor Using a 3D-Printed Mold." In ASME 2022 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/fedsm2022-87613.
Повний текст джерелаAbshirini, Mohammad, Mohammad Charara, Yingtao Liu, Mrinal C. Saha, and M. Cengiz Altan. "Additive Manufacturing of Polymer Nanocomposites With In-Situ Strain Sensing Capability." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-86263.
Повний текст джерела