Добірка наукової літератури з теми "3-D metrology"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "3-D metrology".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "3-D metrology"
Poon, Ting-Chung, Yaping Zhang, Liangcai Cao, and Hiroshi Yoshikawa. "Editorial on Special Issue “Holography, 3-D Imaging and 3-D Display”." Applied Sciences 10, no. 20 (October 11, 2020): 7057. http://dx.doi.org/10.3390/app10207057.
Повний текст джерелаHärter, Daniel. "3-D metrology system with internal calibration." Optical Engineering 50, no. 1 (January 1, 2011): 013604. http://dx.doi.org/10.1117/1.3530130.
Повний текст джерелаClarke, Tim, and Richard Gooch. "Real‐time 3‐D metrology for aerospace manufacture." Sensor Review 19, no. 2 (June 1999): 113–15. http://dx.doi.org/10.1108/02602289910266304.
Повний текст джерелаSid-Ahmed, M. A., and M. T. Boraie. "Dual camera calibration for 3-D machine vision metrology." IEEE Transactions on Instrumentation and Measurement 39, no. 3 (June 1990): 512–16. http://dx.doi.org/10.1109/19.106283.
Повний текст джерелаMurakami, Hiroshi, Akio Katsuki, Hiromichi Onikura, Takao Sajima, Norio Kawagoishi, Eiji Kondo, and Tomohiro Honda. "An Optical Fiber Probe for 3-D Micro Metrology." Key Engineering Materials 447-448 (September 2010): 524–28. http://dx.doi.org/10.4028/www.scientific.net/kem.447-448.524.
Повний текст джерелаValade, Charles, Jérôme Hazart, Sébastien Bérard-Bergery, Elodie Sungauer, Maxime Besacier, and Cécile Gourgon. "Tilted beam scanning electron microscopy, 3-D metrology for microelectronics industry." Journal of Micro/Nanolithography, MEMS, and MOEMS 18, no. 03 (August 19, 2019): 1. http://dx.doi.org/10.1117/1.jmm.18.3.034001.
Повний текст джерелаLiu, Xiao-li, A.-meng Li, Xiao-bo Zhao, Peng-dong Gao, Jin-dong Tian, and Xiang Peng. "Model-based optical metrology and visualization of 3-D complex objects." Optoelectronics Letters 3, no. 2 (March 2007): 115–18. http://dx.doi.org/10.1007/s11801-007-7018-y.
Повний текст джерелаZhang, Song, Rongguang Liang, and Lianxiang Yang. "Special Section Guest Editorial: High-Speed 3-D Optical Metrology and Applications." Optical Engineering 53, no. 11 (October 14, 2014): 112201. http://dx.doi.org/10.1117/1.oe.53.11.112201.
Повний текст джерелаZhang, Xianzhu. "Analysis of 3-D surface waviness on standard artifacts by retroreflective metrology." Optical Engineering 39, no. 1 (January 1, 2000): 183. http://dx.doi.org/10.1117/1.602350.
Повний текст джерелаShaw, Jonathan, Tuo-Hung Hou, Hassan Raza, and Edwin Chihchuan Kan. "Statistical Metrology of Metal Nanocrystal Memories With 3-D Finite-Element Analysis." IEEE Transactions on Electron Devices 56, no. 8 (August 2009): 1729–35. http://dx.doi.org/10.1109/ted.2009.2024108.
Повний текст джерелаДисертації з теми "3-D metrology"
Zhang, Hong. "The phase shifting technique and its application in 3-D fringe projection profilometry." Thesis, Liverpool John Moores University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.310141.
Повний текст джерелаNilsson, Bengt. "Interferometric 3-D Camera for Shape and Deformation Measurements using Ultra Short Laser Pulses." Doctoral thesis, KTH, Production Engineering, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3321.
Повний текст джерелаTeixeira, Alves Joël. "Définition analytique des surfaces de denture et comportement sous charge des engrenages spiro-coniques." Phd thesis, INSA de Lyon, 2012. http://tel.archives-ouvertes.fr/tel-00743561.
Повний текст джерелаMahavar, Narendra. "An electromagnetically actuated mesoscale ball and socket joint for applications in 3-D metrology and electrical characterization." Thesis, 2022. https://etd.iisc.ac.in/handle/2005/5830.
Повний текст джерелаAlves, Joël Teixeira. "Définition analytique des surfaces de denture et comportement sous charge des engrenages spiro-coniques." Thesis, 2012. http://www.theses.fr/2012ISAL0045/document.
Повний текст джерелаThe design of spiral bevel gears is still very complex nowadays because the tooth geometry, and thus the kinematic performance, come from the manufacturing process of this type of gear. The cutting is related to two major manufacturers: Gleason and Klingelnberg. Many machine settings drive directly the shape of teeth surfaces, their optimization is therefore not intuitive. Due to the progress made during the last decade by the CNC machines and the CAM (Computer Aided Manufacturing) softwares, it becomes possible to manufacture spiral bevel gears of quite correct quality on a 5-axis milling machine. A numerical model was developed in order to generate a simplified type Gleason geometry. This last was then manufactured with a 5-axis milling machine. A metrological study, comparing the teeth obtained with the CAD models, was then carried out to prove that the manufacturing by 5-axis milling machine can be an alternative to conventional cutting methods. New types of geometry can be then proposed, which could not be considered by the conventional methods of manufacturing. Geometry based on the theory of spherical involutes, combined with a logarithmic spiral was developed and then manufatured. In addition, profile and crowning modifications can be defined to avoid the tooth edge contacts. This type of analytical geometry offers simpler possibilities for optimizing the meshing. The surface optimization can be achieved using the quasi-static meshing model under load developed in the context of this thesis. The surroundings of the gear are taken into account in the simulation: deformation of the shafts, of the gears and their supports (rims for example) as well as the local contact deformations. The influence coefficient method is used to solve the load sharing between all the teeth instantaneously in contact. An original method, using only one finite element computation and the definition of a set of functions, can quickly calculate the teeth bending, taking into account their surroundings. The contact deformations are obtained with an analytical method, based on Boussinesq theories. In addition, meshing defects can be integrated between the spiral beval pinion and gear. To validate the numerical model, a test bench was achieved, allowing the measurement of the loaded transmission error and the visualization of the contact patterns. The test bench is integrated inside a numerical 3-axis milling machine: the pinion is mounted in the spindle of the milling machine, when the base of the bench is clamped on its plate. Thus, assembly errors can be imposed easily and accurately
Частини книг з теми "3-D metrology"
Gyllenbok, Jan. "National Systems of Units and Currencies: D–G." In Encyclopaedia of Historical Metrology, Weights, and Measures, 983–1312. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-66691-4_2.
Повний текст джерелаТези доповідей конференцій з теми "3-D metrology"
K., Ravi Kumar, Vernon Jialiang Shen, Amitava Talukdar, and Anand Asundi. "Adaptive confocal system for 3-D profiling." In Ninth International Symposium on Laser Metrology, edited by Chenggen Quan and Anand Asundi. SPIE, 2008. http://dx.doi.org/10.1117/12.814569.
Повний текст джерелаGorthi, Sai Siva, and Kameswara R. Lolla. "Wavelet transform analysis of truncated fringe patterns in 3-D surface profilometry." In Optical Metrology, edited by Wolfgang Osten, Christophe Gorecki, and Erik L. Novak. SPIE, 2005. http://dx.doi.org/10.1117/12.612634.
Повний текст джерелаKlett, Karl, Justin Bickford, and Neal Bambha. "3-D Digital Holography for Biometric Applications." In Applied Industrial Optics: Spectroscopy, Imaging and Metrology. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/aio.2016.ait1b.2.
Повний текст джерелаBraker, Benjamin, and Eric D. Moore. "An algorithm for high-speed 3-D profilometry." In Applied Industrial Optics: Spectroscopy, Imaging and Metrology. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/aio.2011.jwc2.
Повний текст джерелаMolnar, Alyosha, Albert Wang, and Patrick Gill. "CMOS Angle Sensitive Pixels for 3-D Imaging." In Applied Industrial Optics: Spectroscopy, Imaging and Metrology. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/aio.2012.jw4a.2.
Повний текст джерелаChampreux, Jean-Philippe, Olivier Cahuc, Philippe Darnis, Jean-Yves K'nevez, Raynald Laheurte, Nathalie Darbois, and Jérôme Néauport. "A New Method of Damage Determination: 3-D Metrology." In Optical Fabrication and Testing. Washington, D.C.: OSA, 2010. http://dx.doi.org/10.1364/oft.2010.owa4.
Повний текст джерелаJalkio, Jeffrey A., John E. Bolkcom, Richard C. Kim, Curt J. Bocchi, and Steven K. Case. "Components of an Intelligent 3-D Sensor System." In Machine Vision. Washington, D.C.: Optica Publishing Group, 1987. http://dx.doi.org/10.1364/mv.1987.tha1.
Повний текст джерелаBrown, Alistair J. "High-speed optical measurement of 3-D surfaces." In Laser Dimensional Metrology: Recent Advances for Industrial Application, edited by Michael J. Downs. SPIE, 1993. http://dx.doi.org/10.1117/12.168070.
Повний текст джерелаDaher, Reinhard, Wylie McAdam, and Gordon Pizey. "Implementation of a 3-D stereovision system for the production of customized orthotic accessories." In Industrial Vision Metrology, edited by Sabry F. El-Hakim. SPIE, 1991. http://dx.doi.org/10.1117/12.48239.
Повний текст джерелаQin, Shu. "Challenges of 2-D (3-D) device doping process and doping profiling metrology." In 2016 16th International Workshop on Junction Technology (IWJT). IEEE, 2016. http://dx.doi.org/10.1109/iwjt.2016.7486680.
Повний текст джерелаЗвіти організацій з теми "3-D metrology"
Swallow, Kevin. 3-D Microprobe Metrology. Office of Scientific and Technical Information (OSTI), October 2008. http://dx.doi.org/10.2172/952476.
Повний текст джерела