Дисертації з теми "120405 Models of Engineering Design"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "120405 Models of Engineering Design".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Bashir, Hamdi A. "Models for estimating design effort." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0034/NQ64508.pdf.
Повний текст джерелаLeBlanc, Andrew Roland. "Engineering design decomposition." Thesis, Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/16044.
Повний текст джерелаJessop, Alan Thomas. "Multiattribute models for engineering evaluation." Thesis, Heriot-Watt University, 1999. http://hdl.handle.net/10399/1226.
Повний текст джерелаPeak, Russell Speights. "Product model-based analytical models (PBAMs) : a new representation of engineering analysis models." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/18379.
Повний текст джерелаGonzalez-Zugasti, Javier P. (Javier Patricio) 1965. "Models for platform-based product family design." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/9300.
Повний текст джерелаIncludes bibliographical references (p. 95-97).
Platform-based product families have been an effective way for companies to offer increased variety into markets, while containing the resulting complexity of developing large numbers of products. A product platform is the set of resources - components, processes, technologies, and knowledge - that are shared across multiple products offered by a firm. The products derived from that common platform are called the variants, and the set of variants forms a product family. This thesis presents a theoretical basis for modeling the design of platform-based product families, as well as practical implementations based on those models. The problem is formulated as an optimization, where the requirements of the desired variants must be balanced against family objectives, such as maximizing the value of developing the family. A general case is formulated that covers the effects of using a platform-based design on the benefits and investments required to produce the desired family. The problem is then simplified into a two-step optimization approach to apply it to actual design situations for complex products. The first stage considers the technical details of creating feasible product families that satisfy the variants' requirements while optimizing the expected value to the firm. The second stage evaluates the design alternatives generated by the first step, considering the effects of uncertainty during the actual development of the family on its value to the firm. This evaluation is then used to select the most appropriate choice of family design. A case study of the design of multiple NASA exploratory space missions based on alternative telecommunications technology platforms is shown. Applying the approach resulted in several alternative family designs, some of which had not been previously considered viable. The resulting candidate designs were evaluated through the use of decision analysis models developed in this thesis, which calculate the value to the firm of each design. Simulation was then used to evaluate the value of each alternative and its flexibility to changes in uncertain factors during the development process. As a reference, a Pugh-type selection method (a qualitative, multi-criteria approach) was also explored and applied to the example of platform-based spacecraft design.
by Javier P. Gonzalez-Zugasti.
Ph.D.
Smith, Robert Paul. "Development and verification of engineering design iteration models." Thesis, Massachusetts Institute of Technology, 1992. http://hdl.handle.net/1721.1/12858.
Повний текст джерелаGasparini, Riccardo. "Engineering Analysis in Imprecise Geometric Models." FIU Digital Commons, 2014. http://digitalcommons.fiu.edu/etd/1793.
Повний текст джерелаThompson, David Charles. "Feasibility of a skeletal modeler for conceptual mechanical design /." Full text (PDF) from UMI/Dissertation Abstracts International, 2000. http://wwwlib.umi.com/cr/utexas/fullcit?p3004386.
Повний текст джерелаRios, Miguel. "Broadband networks design models and admission control algorithms." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0020/NQ48114.pdf.
Повний текст джерелаShen, Su 1973. "Logistics service network design : models, algorithms, and applications." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/29424.
Повний текст джерелаIncludes bibliographical references (leaves 177-186).
Service network design is critical to the profitability of express shipment carriers. In this thesis, we consider two challenging problems associated with designing networks for express shipment service. The first problem is to design an integrated network for premium and deferred services simultaneously. Related existing models adapted to this problem are intractable for realistic instances of this problem: computer memory requirements and solution times are excessive. We introduce a disaggregate information-enhanced column generation approach for this problem that reduces the number of variables to be considered in the integer program from hundreds of thousands to only thousands, allowing us to solve previously unsolvable problem instances. The second problem is to determine the express package service network design in its entirety, including aircraft routings, fleet assignments, and package flow routings, including hub assignments. Existing models applied to this problem have weak associated linear programming bounds and hence, fail to produce quality feasible solutions. For example, for a small network design problem instance it takes days to produce a feasible solution that is provably near- optimal using the best performing existing model. To overcome these tractability challenges, we introduce a new model, referred to as the gateway cover and flow formulation. Applying our new formulation to the same network design instance, it takes only minutes to find an optimal solution.
(cont.) Applying our disaggregate information-enhanced column generation approach and gateway cover and flow formulation and solution approach to the network design problems of a large express package service provider, we demonstrate tens of millions of dollars in potential annual operating cost savings and reductions in the numbers of aircraft needed to perform the service. Moreover, we illustrate that, though designed for tactical planning, our new model and solution approach can provide insights for strategic decision-making, such as hub opening/closure, hub capacity expansion, and fleet composition and size.
by Su Shen.
Ph.D.
Marston, Matthew C. "Game based design : a game theory based approach to engineering design." Diss., Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/15877.
Повний текст джерелаPark, Hyo Seon. "Neural dynamics models for integrated optimum design of large steel structures." Connect to resource, 1995. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1239621706.
Повний текст джерелаNukala, Murthy V. R. K. N. "Generalized models of design iteration using signal flow graphs." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/11486.
Повний текст джерелаHu, Cheng Lin. "Design optimization of fuzzy models in system identification." Thesis, University of Macau, 2010. http://umaclib3.umac.mo/record=b2493501.
Повний текст джерелаSeitz, Timothy M. "Linearizing and Distributing Engine Models for Control Design." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1373728747.
Повний текст джерелаViriththamulla, Gamage Indrajith. "Mathematical programming models and heuristics for standard modular design problem." Diss., The University of Arizona, 1991. http://hdl.handle.net/10150/185431.
Повний текст джерелаPliuskuvienė, Birutė. "Adaptive data models in design." Doctoral thesis, Lithuanian Academic Libraries Network (LABT), 2008. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2008~D_20080627_143940-41525.
Повний текст джерелаDisertacijoje nagrinėjama taikomųjų uždavinių sprendimus realizuojančių programinių priemonių, kurių nepastovumą lemia pirminių duomenų turinio, jų struktūrų ir sprendžiamų taikomojo pobūdžio uždavinių algoritmų pokyčiai, adaptavimo problema.
Flodin, Patrik. "Creating Player Models for Linearity in Level Design." Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20389.
Повний текст джерелаMalak, Richard J. Jr. "A Framework for Validating Reusable Behavioral Models in Engineering Design." Thesis, Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/6882.
Повний текст джерелаJobe, Jonathan Michael. "Multi-aspect component models enabling the reuse of engineering analysis models in SysML /." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24810.
Повний текст джерелаKutluay, Umit. "Design Scaling Og Aeroballistic Range Models." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12605698/index.pdf.
Повний текст джерелаin functions from the Optimization Toolbox of Matlab®
are used in the optimization routine, and also a graphical user interface is designed for easy access to the design variables. The developed code is a very useful tool for the designer, although the results are not meant to be directly applied to the final product, they form the starting points for the detailed design.
Freeman, Ian James. "Computer-Aided Design Integration in Virtual Reality Design Reviews for Improved Interaction with Engineering Models." BYU ScholarsArchive, 2017. https://scholarsarchive.byu.edu/etd/6549.
Повний текст джерелаHan, Sangmok. "A design tool for reusing integration knowledge in simulation models." Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/85771.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 88-89).
In the academic field of computer-aided product development, the role of the design tool is to support engineering designers to develop and integrate simulation models. Used to save time and costs in product development process, the simulation model, however, introduces additional costs for its development and integration, which often become considerably large due to the fact that many, complex simulation models need to be integrated. Moreover, the result of integration and the effort taken during the integration process are often not reused for other product development projects. In this paper, we attempt to develop a design tool that can capture integration knowledge and make the knowledge reusable for other design tasks. More specifically, we are interested in the two kinds of integration knowledge: the first captured in the form of a graph structure associating simulation models, called the integration structure, and the second generalized from script codes into rule-based patterns, called the integration code pattern. An integration mechanism and a pattern generalization algorithm have been developed and incorporated into a design tool utilizing a new integration model called catalog model, a model that enables us to reuse the integration structure and code patterns of one model to quickly build another. Application scenarios have demonstrated the effectiveness of the design tool: The same integration task could be performed in less time, and repetitive and error-prone elements in the task were substantially reduced as a result of reusing integration knowledge in the simulation models.
by Sangmok Han.
S.M.
Chandrasekhar, Ashok. "Interfacing geometric design models to analyzable product models with multifidelity and mismatched analysis geometry." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17769.
Повний текст джерелаYu, Jyh-Cheng. "Design for robustness using manufacturing variation patterns and quadrature factorial models /." The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu148786139602629.
Повний текст джерелаZeng, Haoyang Ph D. Massachusetts Institute of Technology. "Machine learning models for functional genomics and therapeutic design." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/122689.
Повний текст джерелаThesis: Ph. D., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2019
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 213-230).
Due to the limited size of training data available, machine learning models for biology have remained rudimentary and inaccurate despite the significant advance in machine learning research. With the recent advent of high-throughput sequencing technology, an exponentially growing number of genomic and proteomic datasets have been generated. These large-scale datasets admit the training of high-capacity machine learning models to characterize sophisticated features and produce accurate predictions on unseen examples. In this thesis, we attempt to develop advanced machine learning models for functional genomics and therapeutics design, two areas with ample data deposited in public databases and tremendous clinical implications. The shared theme of these models is to learn how the composition of a biological sequence encodes a functional phenotype and then leverage such knowledge to provide insight for target discovery and therapeutic design.
First, we design three machine learning models that predict transcription factor binding and DNA methylation, two fundamental epigenetic phenotypes closely tied to gene regulation, from DNA sequence alone. We show that these epigenetic phenotypes can be well predicted from the sequence context. Moreover, the predicted change in phenotype between the reference and alternate allele of a genetic variant accurately reflect its functional impact and improves the identification of regulatory variants causal for complex diseases. Second, we devise two machine learning models that improve the prediction of peptides displayed by the major histocompatibility complex (MHC) on the cell surface. Computational modeling of peptide-display by MHC is central in the design of peptide-based therapeutics.
Our first machine learning model introduces the capacity to quantify uncertainty in the computational prediction and proposes a new metric for peptide prioritization that reduces false positives in high-affinity peptide design. The second model improves the state-of-the-art performance in MHC-ligand prediction by employing a deep language model to learn the sequence determinants for auxiliary processes in MHC-ligand selection, such as proteasome cleavage, that are omitted by existing methods due to the lack of labeled data. Third, we develop machine learning frameworks to model the enrichment of an antibody sequence in phage-panning experiments against a target antigen. We show that antibodies with low specificity can be reduced by a computational procedure using machine learning models trained for multiple targets. Moreover, machine learning can help to design novel antibody sequences with improved affinity.
by Haoyang Zeng
Ph. D.
Ph.D. Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science
Black, Charlene M. "DESIGN OF AEROELASTIC CONTROLLER AND TESTING PROTOCOL USING 3D PRINTED WING MODELS." Miami University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=miami1525367138086183.
Повний текст джерелаLee, KwangHoon. "Engineering design representation by feature based design in design automation : multiple viewpoint dependent models in product development." Thesis, University of Bristol, 2002. http://hdl.handle.net/1983/dbc48d9d-6e99-4a24-95a8-c93cbc1368b3.
Повний текст джерелаLohatepanont, Manoj 1974. "Airline fleet assignment and schedule design : integrated models and algorithms." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/8297.
Повний текст джерелаIncludes bibliographical references (p. 187-192).
In scheduled passenger air transportation, airline profitability is critically influenced by the airline's ability to construct flight schedules containing flights at desirable times in profitable markets. In this dissertation, we study two elements of the schedule generation process, namely, schedule design and fleet assignment. The schedule design problem involves selecting an optimal set of flight legs to be included in the schedule, while the fleet assignment problem involves assigning aircraft types (or fleets) to flight legs to maximize revenues and minimize operating costs simultaneously. With the fleet assignment problem, we investigate the issues of network effects, spill, and recapture. On a constrained flight leg in which demand exceeds capacity, some passengers are not accommodated, or spilled. When passengers travel on two or more constrained legs, flight leg interdependencies or network effects arise because spill can occur on any of these legs. In most basic fleet assignment models, simplistic modeling of network effects and recapture leads to sometimes severe, miscalculations of revenues. Recapture occurs when some of the spilled passengers are re-accommodated on alternate itineraries in the system. In this dissertation, we develop new fleet assignment models that capture network effects, spill, and recapture. Another benefit of one of our models is its tractability and potential for further integration with other schedule planning steps.
(cont.) Our study shows that the benefits of modeling these elements can be as large as $100 million annually for a major U.S. airline. In addition, we show that modeling flight leg interdependence is more important than demand stochasticity for hub-and-spoke fleet assignment problems. We develop two models for schedule design, one assuming that the market share of an airline remains constant with schedule changes; and the other assuming that market share varies with schedule changes. The constant market share model, while less precise in its modeling, is much easier to solve than the variable market share model. We estimate that the potential benefits of these models range from $100 to $350 million annually.
Manoj Lohatepanont.
Sc.D.
Kim, Daeki. "Large scale transportation service network design : models, algorithms and applications." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/10366.
Повний текст джерелаAhmad, Ali Mohsin. "Digital terrain models in engineering : assessment and improvement of accuracy." Thesis, University of Newcastle Upon Tyne, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278756.
Повний текст джерелаWoodhouse, Neil Godfrey. "Geometric models appropriate for engineering analysis from vision metrology data." Thesis, University College London (University of London), 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.325789.
Повний текст джерелаGump, Brandon Adam. "Automated Transforms of Software Models: A Design Pattern Approach." Wright State University / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=wright1260287805.
Повний текст джерелаArnold, Sean. "Design of manufacturing systems with the aid of neural network inverse models." Thesis, Massachusetts Institute of Technology, 1993. http://hdl.handle.net/1721.1/12439.
Повний текст джерелаBharath, Ranjeetha. "Nonlinear observer design and synchronization analysis for classical models of neural oscillators." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/83684.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 37-38).
This thesis explores four nonlinear classical models of neural oscillators, the Hodgkin- Huxley model, the Fitzhugh-Nagumo model, the Morris-Lecar model, and the Hindmarsh-Rose model. Analysis techniques for nonlinear systems were used to develop a set of observers and perform synchronization analysis on the aforementioned neural systems. By using matrix analysis techniques, a study of biological background and motivation, and MATLAB simulation with mathematical computation, it was possible to do a preliminary contraction and nonlinear control systems structural study of these classical neural oscillator models. Neural oscillation and signaling models are based fundamentally on the biological function of the neuron, with behavior mediated through the channeling of ions across a cell membrane. The variable assumed to be measured for this study is the voltage or membrane potential, which could be measured empirically through the use of a neuronal force-clamp system. All other variables were estimated by using the partial state and full state observers developed here. Preliminary observer rate convergence analysis was done for the Fitzhugh-Nagumo system, and preliminary synchronization analysis was done for both the Fitzhugh-Nagumo and the Hodgkin- Huxley systems. It was found that by using a variety of techniques and mathematical matrix analyses methods (e.g. diagonal dominance or other norms), it was possible to develop a case-by-case nonlinear control systems approach to each particular system as a biomathematical entity.
by Ranjeetha Bharath.
S.B.
Telleria, Maria J. "Design rules and models for the synthesis and optimization of cylindrical flexures." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/81755.
Повний текст джерелаThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis. Page 210 blank.
Includes bibliographical references (p. 195-197).
Cylindrical flexures (CFs) are defined as systems composed of flexural elements whose length is defined by the product of their radius of curvature, R, and sweep angle, [phi]. CFs may be constructed out of a cylindrical stock which leads to geometry, manufacturability, and compatibility advantages over planar flexures. However, CFs present a challenge because their mechanics differ from those of straight beams, and although the modeling of curved beams has been researched in detail [1-4], it has yet to be distilled into compliant element and system creation rules. The lack of relevant design rules has inhibited the process of concept generation and optimization of CF systems, preventing these systems from becoming pervasive in engineering applications. The design guidelines and models developed in this work enable (i) the rapid generation of multiple concepts, (ii) the efficient analysis of different designs and selection of the best design, and (iii) the effective optimization of the chosen concept. The CF synthesis approach presented in this thesis has three components: (i) analysis of element mechanics models to reveal key parameters, (ii) understanding of how the key parameters affect the flexure performance and (iii) guidelines as to how to assemble and optimize CF systems. With the knowledge generated designers will be able to rapidly layout possible designs using the element building blocks and system creation rules, and then use the identified key parameters to optimize a design. The synthesis guidelines were established and tested through the development of two case study flexures: a CF linear guide and an x-y-[theta]z stage. The case studies demonstrate the increased design space of CF systems, which makes it possible for these new flexure mechanisms to meet functional requirements that could not be met using traditional straight-beam flexures.
by Maria J. Telleria.
Ph.D.
Nsengiyumva, Olivier. "Simplification of Complex WWTP Models into Simple Design and Evaluative WRRF Tool." Master's thesis, Faculty of Engineering and the Built Environment, 2021. http://hdl.handle.net/11427/33836.
Повний текст джерелаLEE, SEUNG JOO. "RELIABILITY-BASED OPTIMAL STRUCTURAL AND MECHANICAL DESIGN." Diss., The University of Arizona, 1987. http://hdl.handle.net/10150/184136.
Повний текст джерелаSun, Ximeng 1979. "A model-driven approach to scenario-based requirements engineering /." Thesis, McGill University, 2007. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=101655.
Повний текст джерелаThe model-driven approach starts with modeling requirements of a system in scenario models and the subsequent automatic transformation to state-based behavior models. Then, either code can be synthesized or models can be further transformed into models with additional information such as explicit timing information or interactions between components. These models, together with the inputs (e.g., queries, performance metrics, test cases, etc.) generated directly from the scenario models, can be used for a variety of purposes, such as verification, analysis, simulation, animation and so on.
A visual modeling environment is built in AToM3 using Meta-Modeling and Model Transformation. It supports modeling in Sequence Diagrams, automatic transformation to Statecharts, and automatic generation of requirements text from Sequence Diagrams.
An application of the model-driven approach to the assessment of use cases for dependable systems is shown.
Mowrey, Corinne H. "Retail Facility Design Considering Product Exposure." Wright State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=wright1472487958.
Повний текст джерелаAl-Salka, M. A. "Models and computer based support tools for conceptual design in mechanical engineering." Thesis, Swansea University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.635720.
Повний текст джерелаBelben, Joel Brian. "ENABLING RAPID CONCEPTUAL DESIGN USING GEOMETRY- BASED MULTI-FIDELITY MODELS IN VSP." DigitalCommons@CalPoly, 2013. https://digitalcommons.calpoly.edu/theses/969.
Повний текст джерелаMarufuzzaman, Mohammad. "Models for a carbon constrained, reliable biofuel supply chain network design and management." Thesis, Mississippi State University, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3631817.
Повний текст джерелаThis dissertation studies two important problems in the field of biomass supply chain network. In the first part of the dissertation, we study the impact of different carbon regulatory policies such as carbon cap, carbon tax, carbon cap-and-trade and carbon offsetmechanism on the design and management of a biofuel supply chain network under both deterministic and stochastic settings. These mathematical models identify locations and production capacities for biocrude production plants by exploring the trade-offs that exist between transportations costs, facility investment costs and emissions. The model is solved using a modified L-shaped algorithm. We used the state of Mississippi as a testing ground for our model. A number of observations are made about the impact of each policy on the biofuel supply chain network.
In the second part of the dissertation, we study the impact of intermodal hub disruption on a biofuel supply chain network. We present mathematical model that designs multimodal transportation network for a biofuel supply chain system, where intermodal hubs are subject to site-dependent probabilistic disruptions. The disruption probabilities of intermodal hubs are estimated by using a probabilistic model which is developed using real world data. We further extend this model to develop a mixed integer nonlinear program that allocates intermodal hub dynamically to cope with biomass supply fluctuations and to hedge against natural disasters. We developed a rolling horizon based Benders decomposition algorithm to solve this challenging NP-hard problem. Numerical experiments show that this proposed algorithm can solve large scale problem instances to a near optimal solution in a reasonable time. We applied the models to a case study using data from the southeast region of U.S. Finally, a number of managerial insights are drawn into the impact of intermodal-related risk on the supply chain performance.
Wanigasekara, Prashan. "Latent state space models for prediction." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/106269.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references (pages 95-98).
In this thesis, I explore a novel algorithm to model the joint behavior of multiple correlated signals. Our chosen example is the ECG (Electrocardiogram) and ABP (Arterial Blood Pressure) signals from patients in the ICU (Intensive Care Unit). I then use the generated models to predict blood pressure levels of ICU patients based on their historical ECG and ABP signals. The algorithm used is a variant of a Hidden Markov model. The new extension is termed as the Latent State Space Copula Model. In the novel Latent State Space Copula Modelthe ECG, ABP signals are considered to be correlated and are modeled using a bivariate Gaussian copula with Weibull marginals generated by a hidden state. We assume that there are hidden patient "states" that transition from one hidden state to another driving a joint ECG-ABP behavior. We estimate the parameters of the model using a novel Gibbs sampling approach. Using this model, we generate predictors that are the state probabilities at any given time step and use them to predict a patient's future health condition. The predictions made by the model are binary and detects whether the Mean arterial pressure(MAP) is going to be above or below a certain threshold at a future time step. Towards the end of the thesis I do a comparison between the new Latent State Space Copula Model and a state of the art Classical Discrete HMM. The Latent State Space Copula Model achieves an Area Under the ROC (AUROC) curve of .7917 for 5 states while the Classical Discrete HMM achieves an AUROC of .7609 for 5 states.
by Prashan Wanigasekara.
S.M. in Engineering and Management
Du, Plessis Francois Daniel. "Development of nonlinear CAD Models for the design of linear LDMOS power amplifiers." Thesis, Stellenbosch : University of Stellenbosch, 2006. http://hdl.handle.net/10019.1/1691.
Повний текст джерелаNonlinear transistor modeling is becoming increasingly popular due to the demand for high linearity and high efficiency microwave amplifiers. The available models often fail to accurately predict the higher order harmonics and intermodulation distortion, which are essential when designing high-linearity amplifier circuits. This thesis describes the design of hardware and software used for the development of nonlinear CAD models. A multiline TRL calibration kit is designed and manufactured so that the characterisation of a LDMOSFET, with a RF output power capability of 10W, can be performed using an adaptive-bias S-parameter measurement algorithm. Verification standards are also manufactured and used to determine the measurement accuracy after calibration. A series of GUIs are developed to ease the model extraction process. The extraction of the small-signal model parameters is performed between 0.4 and 3 GHz, and the extraction of the parameter values for the Fager large-signal model is then performed. An improved model is defined that implements two nonlinear charge sources in stead of the three nonlinear capacitors used in the Fager model. The nonlinear charge equations are formulated using the voltage-derivatives of the calculated nonlinear charge at each port of the device. By accurately modeling the voltagederivatives of the charge, where the voltages are functions of time, the prediction of the current produced by each of the charge sources is improved. The nonlinear models are verified against the MET model, and all three models are compared to measured data. It is shown that the models are able to accurately predict the single-tone and two-tone output harmonics for class-AB operation, and in many cases the predictions outperform that of the MET model. The single-tone output power is also verified for class-C operation. Although this prediction is not extremely accurate, it is found that the correct trend for the output harmonic power can be predicted.
Zeb, Irfan, and Shah Fahad. "The Concept of Mental Models in Co Design." Thesis, Högskolan i Borås, Institutionen Handels- och IT-högskolan, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-16765.
Повний текст джерелаProgram: Magisterutbildning i informatik
Kedalagudde, Meghashree Dattatri. "Adding extensions to UML dynamic models for better embedded system design." University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1336742195.
Повний текст джерелаBorja, Ramirez Vicente. "Redesign supported by data models with particular reference to reverse engineering." Thesis, Loughborough University, 1997. https://dspace.lboro.ac.uk/2134/11705.
Повний текст джерелаIbrahim, Eman. "Design of an XML-based alerting system prototype using mortality prediction models." Thesis, University of Ottawa (Canada), 2007. http://hdl.handle.net/10393/27854.
Повний текст джерелаEvans, Thomas C. (Thomas Carl) 1971. "Statistical usage models in mobile processor thermal design and testing." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89389.
Повний текст джерелаIncludes bibliographical references (p. 77).
by Thomas C. Evans.
S.M.