Дисертації з теми "Властивості поверхні"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-19 дисертацій для дослідження на тему "Властивості поверхні".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Лученко, Анжеліка Ілларіонівна. "Фізико-хімічна модифікація поверхні монокристалічного кремнію та її властивості". Дис. канд. фіз.-мат. наук, М-во освіти і науки України, Київ. нац. ун-т ім. Т. Шевченка, 2013.
Знайти повний текст джерелаМельниченко, Людмила Юріївна. "Оптичні властивості та електронна структура поверхні міді, алюмінію та титану". Дис. канд. фіз.-мат. наук, КУ ім.Т.Шевченка, 1997.
Знайти повний текст джерелаШевченко, В. Б. "Модифікація поверхні пористого кремнію та її вплив на оптичні властивості". Дис. канд. фіз.-мат. наук, КНУТШ, 2007.
Знайти повний текст джерелаРассоха, Олексій Миколайович, Ганна Миколаївна Черкашина та І. С. Корнева. "Фурано-епоксидні антикорозійні покриття градієнтної структури на поверхні будівельних залізобетонних виробів". Thesis, ТОВ "Нілан-ЛТД", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48747.
Повний текст джерелаЖуравель, А. А., Людмила Георгіївна Добровольська та Сергій Семенович Добротворський. "Вплив режимів різання на глибину поверхневого шару та розподіл температури поверхні деталі з твердістю HRC 35-40 при високошвидкісному фрезеруванні". Thesis, НТУ "ХПІ", 2013. http://repository.kpi.kharkov.ua/handle/KhPI-Press/9477.
Повний текст джерелаЗвягольський, О. В., та Валерія Валеріївна Субботіна. "Розробка технології одержання зносостійких оксидних покриттів на поверхні титанових сплавів". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/44243.
Повний текст джерелаВозний, Андрій Андрійович, Андрей Андреевич Возный та Andrii Andriiovych Voznyi. "Структурні, оптичні та електрофізичні властивості плівок SnxSy та гетероперехідних структур на їх основі". Thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/72936.
Повний текст джерелаДиссертационная работа посвящена исследованию поликристаллических пленок SnxSy как материала для создания приборных структур, а именно тонкопленочных гетеропереходных солнечных элементов (СЭ); изучению влияния физико-технологических условий нанесения пленок SnS и SnS2, полученных в квазизамкнутом объеме и влиянию термической и лазерной обработки слоев SnS2 на их структурные, субструктурные, оптические, электрофизические свойства и элементный состав для использования в приборных структурах; определению оптимальных режимов получения однофазных пленок SnS, SnS2 и созданию СЭ с конструкциями "Substrate" и "Superstrate" на их основе; моделированию физических процессов в СЭ на основе пленок сульфида олова и выявлению параметров, ограничивающих эффективность полученных фотопреобразователей (ФЭП). Установленные взаимосвязи между физико-технологическими условиями получения пленок SnS и SnS2, послеростовым отжигом (термическим и лазерным) и структурными, субструктурными, оптическими, электрофизическими свойствами, элементным составом могут быть использованы для повышения КПД существующих СЕ и создания новых подходов для изготовления эффективных и экономичных пленочных ФЭП.
The dissertation is devoted to the following aspects: (i) investigation of the influence of growth conditions of SnS and SnS2 films obtained by the close spaced sublimation (CSS) method and exploring the effect of thermal and laser post-growth treatment of SnS2 layers on structural, substructural, optical, electrical properties and chemical composition for thin film solar cell application; (ii) determination of the optimal conditions for production a single-phase SnS and SnS2 films and formation of solar cells based on "Substrate" and "Superstrate" device architecture; (iii) numerical simulation of the physical processes in solar cells based on tin monosulfide films and evaluation of the parameters that limit efficiency of the produced devices. In the first stage, we have studied in detail the influence of grown conditions on structural and electrical properties, phase composition and surface morphology of polycrystalline SnS2 and SnS thin films. It was found that obtained samples are single-phase and have good crystal quality. This result open new possibility for application of close spaced sublimation method for deposition of high quality and low cost SnS2 and SnS thin films. Also, the parameters of localised states (LS) in the band-gap of SnS2 thin films were determined from analysis of current-voltage characteristic and temperature-dependent conductivity measurements. For this purpose, for the first time, the method of injection spectroscopy for the analysis of trap centers in SnS2 thin films was used. Lastly, based on optimal growth conditions of SnS films, the heterojunction solar cells were fabricated and tested. The next stage of this work is post-growth treatment of initial SnS2 samples. In case of thermal annealing, we demonstrate a simple approach to fabricate pure-phase SnS thin films. In particular, the thermally-induced SnS2-SnS phase transition was observed. The modification of the chemical composition and hence phase transition was confirmed by the EDS, XRD and Raman spectroscopy methods. It was clearly shown that amount of SnS2 and Sn2S3 phases decreased with the increasing of annealing time and temperature. The measurements of optical reflectance and transmission spectra reveal substantial decreasing in band gap energy of material which indicates the transition from wide band gap SnS2 to narrower band gap SnS. Finally, the heterojunction solar cell based on a SnS thin film, obtained from the initial SnS2 layer, was fabricated and tested. These results can be used for improvement of SnxSy-based optoelectronic devices using thermal annealing. In case of laser annealing, we report the modification of surface, chemical and phase composition of SnxSy thin film. In particular, for the first time, the laser-induced transition from SnS2 to SnS phase was observed. It was established that the phase transition is due to evaporation of sulfur from the surface under intensive laser irradiation. The electrical measurements of the irradiated samples show diode behavior of the current-voltage dependencies. This was considered as the evidence of formation of the two-layer n-SnS2/p-SnS heterojunction structure by the laser irradiation of initial single-phase SnS2 thin film. Thus, these results open up a new possibility for producing n-SnS2/p-SnS heterojunction structures and improvement of SnxSy-based optoelectronic devices using laser radiation. Finally, in order to predict the main limiting factors affecting performance of SnS based photovoltaic devices, we performed device simulations in SCAPS 1-D software. Our modelling showed that reducing defects in SnS layer and at buffer/absorber interface are the primary issues for overcoming the record efficiency of 4.4 %.
Дзюра, Володимир Олексійович. "Наукові основи забезпечення параметрів якості робочих поверхонь тіл обертання технологічними методами". Diss., Тернопільський національний технічний університет імені Івана Пулюя, 2021. https://ena.lpnu.ua/handle/ntb/56686.
Повний текст джерелаГрабко, Р. В. "Формування структури і властивостей покриття на поверхні різального інструменту". Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/70977.
Повний текст джерелаЛисюк, В. О. "Модифікація оптичних властивостей тонких плівок перехідних металів на поверхні піроелектриків йонною імплантацією". Дис. канд. фіз.-мат. наук, КНУТШ, 2011.
Знайти повний текст джерелаБілоусов, Олег Юрійович. "Фільтрувальні композити на основі пороутворюючих матеріалів різного генезису". Thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/40818.
Повний текст джерелаThe thesis is devoted to the development of scientific bases of chemical technology of production of porous ceramic filter materials under conditions of expansion of raw material base, increase of operational reliability and competitiveness. Comprehensive solution of issues of industrial development, life support and environmental protection has necessitated the implementation of filtration and purification of air, gases and liquids using porous materials. At the same time, attention is paid to expanding the range of such materials, increasing the performance and operational reliability. Elements of porous ceramics, which were produced in Ukraine at the Slavyansky ceramic plant, became practically widespread in filtration and purification systems. However, the constant expansion of applications and technical requirements for porous ceramics requires further modernization of their technology based on the deepening of scientific ideas about the criteria for selecting raw materials, their physical and chemical properties and features of the structure of products. Known developments in the technology of porous ceramics are mainly based on the use of highly concentrated dispersed systems based on resource-intensive ceramic fireclay, made by high-temperature firing of refractory clays. The analysis of the filler as a factor influencing the formation of the structure and properties of the products is reduced to the variation of its particle size distribution. In most known developments, the structural characteristics of filter ceramics are limited by indicators of total or open porosity. The cleaning efficiency is associated with a decrease in pore diameter while reducing productivity. Further development of competitive national production, increasing the range and directions of use of porous ceramics are inextricably linked with the expansion of raw materials, development of new mass compositions, improvement of technological processes and equipment, absorption of scientific ideas about the connection composition - structure - properties in highly concentrated dispersed silicate systems. The aim of this work is to develop scientific and technical principles of national production of competitive porous ceramics waiting for cleaning, irrigation and aeration systems by expanding the raw material base, establishing patterns of formation of the pore structure of filter ceramics based on fillers of different genesis. A set of physicochemical and instrumental methods of analysis and standardized testing were used for research. Lyophilicity and wettability by polar and nonpolar liquid were evaluated by the improved technique of B.V. Deryagin. The structure and phase composition were determined using X-ray phase, electron microscopic and infrared methods of physicochemical analysis. Processing of experimental results was carried out using the methods of mathematical statistics. The composition, structure and surface properties of varieties of raw materials of artificial (ceramic fireclay) and natural (magmatic rocks) origin as the main raw material – fillers and man-made cutting additives for the manufacture of porous filter composites for multifunctional purposes have been studied. New rational compositions of porous ceramics based on raw materials of different genesis with differentiation of varieties and quantitative ratio of components, porous man-made additives and the degree of heat treatment have been created. Technological principles of application of initial materials of different genesis for production of elements of ceramics as filter composites taking into account an energy condition and lyophilicity of a surface of pore structure are developed. The design has been improved and the industrial production of porous ceramic elements for technical systems of aeration and water purification and soil irrigation has been made.
Кравченко, Сергій Олександрович, Едуард Карпович Посвятенко, Микола Анатолійович Ткачук, Віктор Григорович Гончаров, В. М. Шеремет, О. К. Олейник та В. І. Демиденко. "Технологія дискретного зміцнення для поверхонь деталей". Thesis, НТУ "ХПІ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/24959.
Повний текст джерелаПідгайна, О. О. "Вплив ультрафіолетового випромінювання на поверхневі властивості текстильних матеріалів та виробів із них". Thesis, Київський національний університет технологій та дизайну, 2019. https://er.knutd.edu.ua/handle/123456789/13658.
Повний текст джерелаШамардін, Артем Володимирович, Артем Владимирович Шамардин та Artem Volodymyrovych Shamardin. "Оптимізація властивостей плівок Cu2ZnSn(Ge)S4, отриманих спрей-піролізом, для сонячних елементів третього покоління". Thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/80886.
Повний текст джерелаДиссертация посвящена определению условий синтеза пленок CZTS методом спрей-пиролиза с оптимизированными свойствами, пригодных для приборного использования; разработке технологического подхода для легирования пленок атомами Ge и исследованию механизмов замещения атомов Sn на Ge при осаждения слоев CZTGeS; комплексному исследованию пленок CZTS и CZTGeS в зависимости от различных физико-и химико-технологических условий осаждения и послеростового лазерного отжига с целью оптимизации их характеристик для использования в солнечных элементах (СЭ) третьего поколения; исследованию влияния концентрации серы в прекурсорах на структурные характеристики пленок CZTS и ее дальнейшем влиянии на рабочие параметры СЭ; определению влияния оптических потерь, концентрации атомов Ge и Sn в поглощающем слое CZTGeS, материала различных буферных слоев (CdS, ZnS, ZnMgO, SnS2) и изменение энергии работы выхода электрона тыльного контактного слоя на основные фотоэлектрические характеристики СЭ; определению параметров необходимых для оптимизации конструкции таких СЭ с улучшенными рабочими характеристиками. Разработанная методика и установленные связи между физико-химическими условиями синтеза пленок CZT(Ge)S, их послеростовых лазерных отжигов и структурными, субструктурными, опто-электрическими характеристиками и элементным составом могут быть использованы для создания СЭ с высокой эффективностью фотопревращения и низкой себестоимостью.
The dissertation is devoted to the determination of the conditions for the synthesis of CZTS films by the spray pyrolysis method with optimized properties, suitable for instrument using; the development of a technological approach for alloying films with Ge atoms and the study of the mechanisms of the replacement of Sn atoms by Ge during the deposition of CZTGeS layers; the comprehensive analysis of CZTS and CZTGeS films depending on various physical and chemical technological conditions of deposition and post-growth laser annealing in order to optimize their properties for use in third generation solar cells (SC); the study of the effect of sulfur concentration in precursors on the structural characteristics of CZTS films and its further influence on SCs operational parameters; the determination of the impact of optical losses, the concentration of Ge and Sn atoms in the CZTGeS absorber layer, the material of various buffer layers (CdS, ZnS, ZnMgO, SnS2) and the change in the energy of work function of back contact layer on the basic photoelectric characteristics of SC; the determination of the parameters needed to optimize the design of such solar cells with improved working characteristics. The developed technique and the established relationships between the physicochemical conditions of the synthesis of CZT(Ge)S films, their post-growth laser annealing, and structural, substructural, optoelectrical characteristics, together with elemental composition can be used to produce SCs with high photoconversion efficiency and low cost-price.
Мазур, С. А. "Алгоритмічні і програмні компоненти системи визначення тепловіддачі між тканиною і контактною поверхнею". Thesis, Київський національний університет технологій та дизайну, 2019. https://er.knutd.edu.ua/handle/123456789/13753.
Повний текст джерелаГоголь, Марко Миронович. "Фотокаталітичні композиційні в’яжучі та наномодифіковані оздоблювальні розчини на їх основі". Diss., Національний університет «Львівська політехніка», 2021. https://ena.lpnu.ua/handle/ntb/56777.
Повний текст джерелаМарчук, В. І., В. Д. Чалий та В. В. Мережа. "Дослідження впливу параметрів процесу шліфування на формування мікронерівностей робочих поверхонь кілець роликопідшипників". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11424.
Повний текст джерелаСмикало, Катерина, Оксана Закора та Людмила Назарчук. "Особливості моделювання адаптивного дитячого одягу". Thesis, Київський національний університет технологій та дизайну, 2021. https://er.knutd.edu.ua/handle/123456789/17976.
Повний текст джерелаChildren's adaptive clothing solves a number of physiological, psychological and social problems, so its design is a difficult engineering task. In particular, for the design of adaptive children's clothing it is necessary to take into account the peculiarities of movement, disproportion of the figure, motility, comfort of dressing etc. It is also necessary to use textile materials and accessories with certain surface properties, because the quality of the surface of clothing plays an important role for children with various psychophysical disorders. For serial production of children's adaptive clothing it is necessary to take into account the peculiarities of children's growth, as the change in anthropological size does not correspond to the system of dimensional features by age groups. Given the global trend of increasing demand for children's inclusive fashion, there is a need to analyze the design of adaptive clothing in order to develop recommendations and their further implementation in mass production.
Осипенко, Олексій Олександрович. "Відновлення експлуатаційних властивостей внутрішніх поверхонь приміщень". Магістерська робота, 2020. https://dspace.znu.edu.ua/jspui/handle/12345/2109.
Повний текст джерелаUA : Досліджено влаштування покриттів внутрішніх поверхонь стін з керамічної плитки для підвищення ефективності виконання та виконаних робіт. Встановленно основні причини недовговічності та ненадійності таких покриттів, основні залежності технічних та експлуатаційних властивостей клеючих матеріалів для їх влаштування. Встановлено ефективність використовуваних матеріалів, способів виробництва робіт, які б дозволили підвищити довговічність, надійність і тривалість міжремонтного періоду експлуатації покриттів внутрішніх поверхонь стін з керамічної плитки з врахуванням сучасних вимог до них. При цьому вирішуються наступні завдання такі, як виявити проблемні сторони і проаналізувати використовувані конструкції, матеріали, способи влаштування і ремонту, узагальнені сучасні конструкції, матеріали і способи.
EN : The arrangement of the coatings of the inner surfaces of the walls of the ceramic tile was investigated in order to increase the efficiency of execution and the works performed. The main reasons for the durability and unreliability of such coatings, the main dependencies of the technical and operational properties of adhesive materials for their arrangement have been established. The efficiency of the materials used, the methods of production of works, which would allow to increase the durability, reliability and duration of the inter-repair period of exploitation of the coatings of the inner surfaces of the walls of ceramic tiles, taking into account modern requirements to them, were established. The following tasks are solved, such as to identify the problematic sides and to analyze the structures, materials, methods of arrangement and repair, generalized modern structures, materials and methods.
RU : Исследована устройства покрытий внутренних поверхностей стен из керамической плитки для повышения эффективности выполнения и выполненных работ. Установленно основные причины недолговечности и ненадежности таких покрытий, основные зависимости технических и эксплуатационных свойств клеящих материалов для их устройства. Установлена эффективность используемых материалов, способов производства работ, позволяющих повысить долговечность, надежность и продолжительность межремонтного периода эксплуатации покрытий внутренних поверхностей стен из керамической плитки с учетом современных требований к ним. При этом решаются следующие задачи такие, как выявить проблемные стороны и проанализировать используемые конструкции, материалы, способы устройства и ремонта, обобщенные современные конструкции, материалы и способы.