Literatura científica selecionada sobre o tema "Β-Metastable"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Β-Metastable".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Β-Metastable"
Settefrati, Amico, Elisabeth Aeby-Gautier, Moukrane Dehmas, Guillaume Geandier, Benoît Appolaire, Sylvain Audion e Jerôme Delfosse. "Precipitation in a near Beta Titanium Alloy on Ageing: Influence of Heating Rate and Chemical Composition of the Beta-Metastable Phase". Solid State Phenomena 172-174 (junho de 2011): 760–65. http://dx.doi.org/10.4028/www.scientific.net/ssp.172-174.760.
Texto completo da fonteNiinomi, Mitsuo. "Enhancement of Mechanical Biocompatibility of Titanium Alloys by Deformation-Induced Transformation". Materials Science Forum 879 (novembro de 2016): 125–30. http://dx.doi.org/10.4028/www.scientific.net/msf.879.125.
Texto completo da fonteWong, Ka-Kin, Hsueh-Chuan Hsu, Shih-Ching Wu e Wen-Fu Ho. "A Review: Design from Beta Titanium Alloys to Medium-Entropy Alloys for Biomedical Applications". Materials 16, n.º 21 (5 de novembro de 2023): 7046. http://dx.doi.org/10.3390/ma16217046.
Texto completo da fonteYin, Jin Gou, Gang Chen, Shao Yang Zhao, Ping Tan, Zheng Feng Li, Jian Wang e Hui Ping Tang. "Titanium-Tantalum Alloy Powder Produced by the Plasma Rotating Electrode Process (PREP)". Key Engineering Materials 770 (maio de 2018): 18–22. http://dx.doi.org/10.4028/www.scientific.net/kem.770.18.
Texto completo da fontePrima, Frédéric, Philippe Vermaut, I. Thibon, D. Ansel, Jean Debuigne e Thierry Gloriant. "Nanostructured Metastable β-Titanium Based Alloy". Journal of Metastable and Nanocrystalline Materials 13 (janeiro de 2002): 307–14. http://dx.doi.org/10.4028/www.scientific.net/jmnm.13.307.
Texto completo da fontePrima, Frédéric, Philippe Vermaut, I. Thibon, D. Ansel, Jean Debuigne e Thierry Gloriant. "Nanostructured Metastable β-Titanium Based Alloy". Materials Science Forum 386-388 (janeiro de 2002): 307–14. http://dx.doi.org/10.4028/www.scientific.net/msf.386-388.307.
Texto completo da fonteGialanella, S., e L. Lutterotti. "Metastable structures in α–β′ brass". Journal of Alloys and Compounds 317-318 (abril de 2001): 479–84. http://dx.doi.org/10.1016/s0925-8388(00)01374-8.
Texto completo da fonteDobromyslov, A. V. "Phase Transformation in Binary Titanium-Base Alloys with Metals of the I, IV−VIII Groups". Materials Science Forum 546-549 (maio de 2007): 1349–54. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.1349.
Texto completo da fonteBovier, Anton, Frank den Hollander e Saeda Marello. "Metastability for Glauber Dynamics on the Complete Graph with Coupling Disorder". Communications in Mathematical Physics 392, n.º 1 (17 de março de 2022): 307–45. http://dx.doi.org/10.1007/s00220-022-04351-8.
Texto completo da fonteLiao, Guang Yue, Shun Guo, Zhen Zhen Bao e Xin Qing Zhao. "β Stability and Mechanical Behavior of Metastable β Type TiNb Based Alloys". Materials Science Forum 747-748 (fevereiro de 2013): 941–46. http://dx.doi.org/10.4028/www.scientific.net/msf.747-748.941.
Texto completo da fonteTeses / dissertações sobre o assunto "Β-Metastable"
Fan, Jiangkun. "Microstructural study of the β→α phase transformation induced by thermo-mechanical treatments in metastable β Ti-5553 alloy". Thesis, Université de Lorraine, 2016. http://www.theses.fr/2016LORR0144/document.
Texto completo da fonteMetastable β titanium alloys are important structural materials for aeronautical applications due to their high strength to density ratio, good ductility and workability and excellent hardenability. Despite the efforts in resolving the complex microstructural evolution related to thermomechanical processes and in gaining knowledge on the produced phases and their contribution to the resultant mechanical properties, there are still some controversial and unresolved issues. The aim of the present PhD work is to determine precisely the metastable nature of β phase and to characterize finely the characteristics of the β→α transformation during high and low temperature thermomechanical treatments. Investigations were performed on a Ti-5553 alloy with the single β phase initial microstructure obtained by solution treatment followed by quenching using scanning and transmission electron microscopy (SEM/TEM) coupled to crystallographic orientation measurements and chemical analyses. It was demonstrated experimentally that the structure of the β phase in the metastable titanium alloy is not “pure” body centered cubic. Diffraction diagrams presents streaking of the β diffraction spots and additional spots at the 1/2, the 1/3 and 2/3 diffraction positions. Also, striations are observed in TEM images. From this experimental evidence and crystallographic calculations, it was proved that atomic displacements on the {110}β and {112}β planes formed a structure between that of the parent β phase and that of the α or ω phase, demonstrating pre-phase transformation tendency. The study of the precipitation during thermomechanical processing at higher temperature in the α+β region revealed that discontinuous equiaxed or short rod shaped α precipitates (1~2μm) mainly form on the high angle and low angle β grain boundaries but seldom in β grain interiors, forming the “necklace” microstructure. The Burgers orientation relationship (BOR) between the α and β phases is destroyed gradually by the deformation. The BOR deviation of grain boundary α is larger than that of intragranular α. The deviation from the BOR increases both with the increasing strain and decreasing strain rate. During the deformation at the lower temperature in the α+β region, the α precipitates exhibit different morphologies: such as lamellar α, equiaxed α and irregular α depending on their localization. Within the slip bands, equiaxed α/β grains which do not respect the BOR are present. However, between the bands, lamellar α and β phases maintaining the BOR are distributed alternately. In that last case a strong variant selection is observed as only the two or three variants that form are those which can accommodate the macroscopic deformation. Comparatively, in absence of compression all 12 variants are formed. The β→α phase transformation is retarded during the hot compression at higher temperature region, which is attributed to the competition between softening and phase transformation. On the contrary, it is promoted during compression at lower temperature region due to the more inducted deformation defects acting as α phase nucleation sites and due to accelerating growth of α precipitates and retarded softening. Dislocation slip is the leading deformation mechanism for the Ti-5553 alloy. Under the lower temperature deformation condition, single or multiple-slip bands with two or three different activated slip systems would form during the hot deformation process. Identification of these slip systems have been done by trace analysis. These results provide new insights into the structural nature of β metastable phase and valuable reference for β→α phase transformation during thermo-mechanical treatment in metastable β titanium alloys
Hua, Ke. "Displacive characteristics of β to α phase transformation and its impact on hot deformation behavior in Ti-7333 metastable β titanium alloy". Electronic Thesis or Diss., Université de Lorraine, 2019. http://www.theses.fr/2019LORR0213.
Texto completo da fonteA thorough investigation has been conducted on the Ti-7333 alloy in terms of the β to α phase transformation. It was revealed that the structure transformation is realized by a contraction in the <1"1" ̅"2" ̅>β, an elongation in the <"1" ̅1"1" ̅>β and <110>β, and a shear on the {1"1" ̅"2" ̅}β<"1" ̅1"1" ̅>β slip system. Each α precipitate is composed of two kinds of nano-sized α domains. One is situated on the broad face of the major α precipitate (named interface α), and the other goes through the major α (termed penetrating α). The nucleation of such α is induced by the large shear strain generated by the formation of the major α. The penetrating α does not obey the BOR with the β matrix. The nucleation of such α is induced by the largest normal strain generated by the formation of the main α plate. The selection of the α variants during hot deformation at 700°C happens with dependence on the local crystal perfection of the β grains. In the slightly deformed β grains, 2 BOR variants are formed ‘cross-shaped’ clusters. The selected variants make maximum contribution to the macroscopic deformation and receive the maximum resolved shear stress from the external load resolved on their {1"1" ̅"2" ̅}β<"1" ̅1"1" ̅>β systems for transformation. In the heavily deformed β grains occupied mainly by dislocation slip, 2 to 4 BOR variants are selected in smaller numbers. The selection criterion is still obeyed but with restriction from the local deformation. The deformation behavior during 700°C compression presents three characteristic stress-strain stages: a linear stage (Stage I), a discontinuous yielding (Stage II) and a steady-state (Stage III). At the end of Stage I, more than 90% of the β boundaries are occupied by grain boundaries α (αGB). The discontinuous yielding of Stage II originated from the fragmentation of the αGB and the intensive formation of mobile dislocations near the β grain boundary areas. The steady-state of Stage III arises from two orientation dependent deformation modes of the β grains. For those in favorable activation orientation for their {110}β<1"1" ̅1>β systems with respect to the external compressive load, the deformation is realized by the dislocation slip and by the formation of slip bands; whereas for those with their {1"1" ̅"2" ̅}β<"1" ̅1"1" ̅>β systems - the system for β to α transformation - in favorable orientations, the deformation is achieved by intensive formation of intragranular α precipitates
Zhang, Jinyong. "Mechanical Behavior and Microstructural Evolution in Metastable β Ti-Mo Based Alloys with TRIP and TWIP Effects". Thesis, Paris 6, 2014. http://www.theses.fr/2014PA066313/document.
Texto completo da fonteIn this work, based on combination of the ‘d-electron alloy design method’ and controlling of electron/atom ratio (e/a), a model of binary Ti-12Mo (wt. %) and ternary Ti-Mo based alloys were designed, induced combined TRIP and TWIP effects (TRIP for Transformation Induced Plasticity and TWIP for Twinning Induced Plasticity). The tensile results show that so-designed alloys exhibit true stress-strain values at uniform plastic deformation, of about 1000-1200MPa and between 0.3 and 0.4 of strain, with a large strain-hardening rate. Several characterization techniques, such as conventional X-ray diffraction (XRD), In-situ Synchrotron X-ray diffraction (SXRD), electron backscatter diffraction (EBSD), electrical resistivity measurements (ERM), transmission electron microscopy (TEM) and automatic crystal orientation measurements (ACOM) TEM, were carried out to to investigate the deformation mechanisms and microstructure evolution sequence. Various deformation mechanisms, i.e. {332}<113> mechanical twinning, deformation induced ω phase and stress-induced α’’ martensite, were identified after mechanical testing, resulting in a combination of high strength, large ductility and improved strain-hardening rate. Furthermore, low temperature aging (LTA) treatments were performed on the Ti-12Mo alloy to improve the mechanical property through controlling the ω phase transformation without excessive modification of β matrix chemical composition, keeping the possibility for combined TRIP and TWIP effects to occur. The influence of LTA treatment on the mechanical behavior and microstructural evolution of Ti-12Mo alloy was discussed in detail
Hendrickson, Mandana. "The Role of Misfit Strain and Oxygen Content on Formation and Evolution of Omega Precipitate in Metastable Beta-titanium Alloys". Thesis, University of North Texas, 2016. https://digital.library.unt.edu/ark:/67531/metadc955080/.
Texto completo da fonteLai, Minjie Verfasser], Dierk [Akademischer Betreuer] Raabe e Robert [Akademischer Betreuer] [Svendsen. "Experimental-theoretical study of the interplay between deformation mechanisms and secondary phases in metastable β titanium alloys / Minjie Lai ; Dierk Raabe, Bob Svendsen". Aachen : Universitätsbibliothek der RWTH Aachen, 2016. http://d-nb.info/1158498632/34.
Texto completo da fonteLai, Minjie [Verfasser], Dierk Akademischer Betreuer] Raabe e Robert [Akademischer Betreuer] [Svendsen. "Experimental-theoretical study of the interplay between deformation mechanisms and secondary phases in metastable β titanium alloys / Minjie Lai ; Dierk Raabe, Bob Svendsen". Aachen : Universitätsbibliothek der RWTH Aachen, 2016. http://d-nb.info/1158498632/34.
Texto completo da fonteVarenne, Chloé. "Etude d'un alliage de titane β "transformable par déformation" : lien entre propriétés mécaniques, microstructures de déformation et mécanismes de rupture". Thesis, Université Paris sciences et lettres, 2020. http://www.theses.fr/2020UPSLM030.
Texto completo da fonteIn order to tackle the lack of ductility and work-hardening of titanium alloys, a new family is being developed, namely, strain-transformable β titanium alloys. The deformation mechanisms involve transformation induced plasticity (TRIP effect) and twinning induced plasticity (TWIP effect). They have been widely studied over the last ten years. On the otherhand, the understanding of fracture mechanisms of TRIP/TWIP titanium alloys still remains poorly documented although this is a key to improve the development of these alloys. Therefore, this project is an in-depth study of the mechanical behavior of a Ti-8.5Cr-1.5Sn β TWIP alloy, under various loading conditions. The coarse microstructure of the alloy was used to investigate deformation and fracture on a grain-by-grain basis. First, a methodology for the systematic study of this family of alloys has been developed. We selected the most relevant tests for a complete study of the mechanical behavior of a TRIP/TWIP alloy by investigating heat treatment conditions (quenching thickness) and mechanical testing conditions (specimen geometry, loading mode). Then,this methodology was validated on the Ti-8.5Cr-1.5Sn alloy first at room temperature, then at subzero temperatures, in order to get closer to the Ms point. The mechanical behavior was evaluated under a wide range of conditions giving access to tensile strength, impact toughness, and fracture toughness. The respective contributions of crack initiation and crack propagation were determined. A multi-scale correlation (optical, SEM, TEM) highlighted fracture by localized plastic flow, without damage development, strongly correlated with the plastic deformation mechanisms and independent of variations in strain rate and stress triaxiality. At subzero temperatures, the absence of ductile-to-brittle transition was demonstrated on the failure mechanisms, as was thepreservation of the phenomenology observed at room temperature (no triggered TRIP effect). Low energy fracture encountered at lower temperatures still involved a ductile dimple mechanism. It remained governed by localized plastic flow, which is triggered all the earlier the lower the test temperature. This new and comprehensive study has improved the understanding of fracture mechanisms of a TRIP/TWIP alloy and provides a solid database for further studies of this family of alloys
Goetz, Morgan. "Contribution à l’étude des mécanismes mis en jeu au cours de la transformation β → α dans des alliages de titane à vocations aéronautiques". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0287.
Texto completo da fonteThe first goal of the work is to investigate the influence of the nominal content in Al, Zr and Hf on the microstructural evolutions of beta-metastable Ti-5Al-5Mo-5V-3Cr alloy during cooling (stepped and continuous) from the beta domain. Three beta-metastable alloys with different compositions are thus considered: Ti-5553 (reference), Natis 1 and Natis 2. We have monitored in situ the overall sequences and kinetics of phase transformations (electrical resistivity, HEXRD) and characterized post mortem the microstructures formed during these transformations (HEXRD, SEM, TEM, image analysis, macro-hardness). Coarse microstructures are also generated in the case of Natis alloys to unravel the role of Zr and Hf. Using all these techniques, we have been able to establish the time and temperature ranges where the stable (alpha, alpha2, beta) and metastable (alpha’’, omega) phases appear, to build TTT and CCT diagrams. It turns out that the overall kinetics of phase transformations and the resulting microstructures are highly dependent on thermal conditions but do not vary significantly between the three alloys. This results from the small difference in nominal composition between the alloys as well as from the neutral role of Zr and Hf elements in terms of partitioning. Based on the analysis of the isothermal kinetics using JMAK model, we have been able to predict the evolution of the phases and morphologies during cooling for the three alloys.The second aim of the work is to investigate the mechanisms involved in the beta => alpha and beta => alpha’’ transformations in Ti-5553 alloy. For this purpose, microstructures are generated during different isothermal treatments and the evolution of the microstructural features and compositions are determined following a quantitative multi-scale approach (HEXRD, SEM, TEM, STEM-EDX, APT). This investigation shows that there is a fast effective partition of the alloying elements during the beta => alpha transformation at high temperature (> 650°C): the compositions of alpha and beta do not vary significantly with holding time and are close to the predictions by Thermo-Calc®. At intermediate temperatures (600°C), alpha displays an initial non-equilibrium composition that evolves slowly towards equilibrium. This evolution has been analyzed using a phase field model, considering a ternary Ti-Mo-V alloy. The calculations have been shown to agree with the measurements if alpha growth is mixed mode, i.e. controlled by bulk diffusion and interfacial process. Finally, at low temperatures (325°C), beta => alpha’’ transformation is accompanied by short distance diffusion resulting in a slight partition between alpha’’ and beta that increases with the treatment duration
Chini, Maria Rita. "Analyse des hétérogénéités de microstructure et de microtexture héritées par transformation de phase β→α dans des pièces massives en alliage Ti-10V-2Fe-3Al : influence sur la dispersion des propriétés mécaniques". Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0149.
Texto completo da fonteThe β-metastable titanium alloys such as Ti-10V-2Fe-3Al are gradually replacing α/β alloys in aeronautical applications thanks to their improved specific strength. However, their microstructures are complex and multi-scale, consisting of a β matrix (of millimetric grains) partially transformed into primary αp nodules (micrometric) and secondary αs lamellae (sub-micrometric). The final mechanical properties are very sensitive to local variations of the microstructure, which are not always fully controlled during forging of massive parts. Moreover, the β matrix, which represent 40% of the volume and whose elastic and plastic behavior is strongly anisotropic (like the α phase) complicates the understanding of the mechanisms of deformation. The first objective of this thesis was to efficiently characterize the microstructure/texture of the different constituents (β/αp/αs) and their heterogeneities within half-finished products and forged parts by using techniques of multi-scale characterization (neutron diffraction, electronic imaging coupled with image analysis and EBSD, reconstruction of high temperature microtextures β/αp). As a result the fragmentation of the β grains into subgrains, the αp macrozones, the destruction of the orientation relation between β/αp and the organization of the αs lamellae in colonies or basket weave was quantified and the differences in size of domains revealed by crystallography and by standard imaging were pointed out. The second objective is to apply this methodology to the analysis of fracture surfaces of samples exhibiting singular behavior (in tension or in fatigue) in order to characterize the microstructural configurations leading to early cracking. This analysis was mainly performed by manual polishing coupled with EBSD acquisitions but also by using 3D imaging by SEM-FIB (Focus Ion Beam) and TKD (Transmission Kikuchi Diffraction) technique on a thin foil FIB-extracted from the crack initiation site. Finally, this experimental study was completed by a micromechanical simulation on a 100% β model microstructure. The objective was to evaluate the influence of the elastic anisotropy of the β phase on the genesis of incompatibility stresses in the elastic and elasto-plastic regimes. The overall results contribute to a better understanding of the variations of mechanical properties related to the local microstructure
Chini, Maria Rita. "Analyse des hétérogénéités de microstructure et de microtexture héritées par transformation de phase β→α dans des pièces massives en alliage Ti-10V-2Fe-3Al : influence sur la dispersion des propriétés mécaniques". Electronic Thesis or Diss., Université de Lorraine, 2018. http://www.theses.fr/2018LORR0149.
Texto completo da fonteThe β-metastable titanium alloys such as Ti-10V-2Fe-3Al are gradually replacing α/β alloys in aeronautical applications thanks to their improved specific strength. However, their microstructures are complex and multi-scale, consisting of a β matrix (of millimetric grains) partially transformed into primary αp nodules (micrometric) and secondary αs lamellae (sub-micrometric). The final mechanical properties are very sensitive to local variations of the microstructure, which are not always fully controlled during forging of massive parts. Moreover, the β matrix, which represent 40% of the volume and whose elastic and plastic behavior is strongly anisotropic (like the α phase) complicates the understanding of the mechanisms of deformation. The first objective of this thesis was to efficiently characterize the microstructure/texture of the different constituents (β/αp/αs) and their heterogeneities within half-finished products and forged parts by using techniques of multi-scale characterization (neutron diffraction, electronic imaging coupled with image analysis and EBSD, reconstruction of high temperature microtextures β/αp). As a result the fragmentation of the β grains into subgrains, the αp macrozones, the destruction of the orientation relation between β/αp and the organization of the αs lamellae in colonies or basket weave was quantified and the differences in size of domains revealed by crystallography and by standard imaging were pointed out. The second objective is to apply this methodology to the analysis of fracture surfaces of samples exhibiting singular behavior (in tension or in fatigue) in order to characterize the microstructural configurations leading to early cracking. This analysis was mainly performed by manual polishing coupled with EBSD acquisitions but also by using 3D imaging by SEM-FIB (Focus Ion Beam) and TKD (Transmission Kikuchi Diffraction) technique on a thin foil FIB-extracted from the crack initiation site. Finally, this experimental study was completed by a micromechanical simulation on a 100% β model microstructure. The objective was to evaluate the influence of the elastic anisotropy of the β phase on the genesis of incompatibility stresses in the elastic and elasto-plastic regimes. The overall results contribute to a better understanding of the variations of mechanical properties related to the local microstructure
Capítulos de livros sobre o assunto "Β-Metastable"
Appolaire, Benoît, Elisabeth Aeby-Gautier, Moukrane Dehmas, Amico Settefrati, Maeva Cottura, Alphonse Finel e Yann Le Bouar. "Modeling of Phase Transformations in β-Metastable Ti Alloys". In Proceedings of the 13th World Conference on Titanium, 461–70. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119296126.ch72.
Texto completo da fonteZheng, Yufeng, John M. Sosa, Robert E. A. Williams, Yunzhi Wang, Rajarshi Banerjee e Hamish L. Fraser. "Development of Ultrafine α Microstructures in a Metastable β Titanium Alloy". In Proceedings of the 13th World Conference on Titanium, 521–27. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119296126.ch83.
Texto completo da fonteLenain, Astrid, Nicolas Clément, Muriel Véron e Pascal J. Jacques. "Characterisation of the Phase Transformations in a Metastable β Titanium Alloy". In THERMEC 2006, 3712–17. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.3712.
Texto completo da fonteSalib, Matthieu, Mien Teixeira, Lionel Germain, Benoit Denand, Nathalie Gey e Elisabeth Aeby-Gaurier. "Influence of α Precipitation at β/β Grain Boundaries on a Microtexture in A β- Metastable Titanium Alloy with and without Previous Deformation". In Proceedings of the 13th World Conference on Titanium, 405–14. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119296126.ch63.
Texto completo da fonteIijima, Mayumi, e Kazuo Onuma. "Octacalcium Phosphate Overgrowth on β-Tricalcium Phosphate Substrate in Metastable Calcium Phosphate Solution". In Biomineralization, 267–72. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1002-7_28.
Texto completo da fonteEmura, Satoshi, Baozhen Jiang, Koichi Tsuchiya e Donald S. Shih. "Influence of Cold Caliber Rolling on α Phase Formation in Metastable β Ti Alloys". In Proceedings of the 13th World Conference on Titanium, 779–82. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119296126.ch131.
Texto completo da fonteHelstroffer, Aurélien, Patrick Villechaise, Pascal Gadaud e Sandra Andrieu. "Effect of Crystallographic Texture on Elastic Properties of Ti-5553 β-Metastable Titanium Alloy". In Proceedings of the 13th World Conference on Titanium, 877–84. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119296126.ch150.
Texto completo da fonteMa, Xinkai, Fuguo Li, Zhankun Sun, Junhua Hou, Xiaotian Fang, Yuntian Zhu e Carl C. Koch. "Achieving Gradient Martensite Structure and Enhanced Mechanical Properties in a Metastable β Titanium Alloy". In Heterostructured Materials, 559–82. New York: Jenny Stanford Publishing, 2021. http://dx.doi.org/10.1201/9781003153078-34.
Texto completo da fontevan Bohemen, S. M. C., Jilt Sietsma e Sybrand van der Zwaag. "On the Nature of the Growth of Bainitic α plates in Metastable β Ti Alloys". In THERMEC 2006, 3684–89. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.3684.
Texto completo da fonteKim, Won Yong, e Han Sol Kim. "Effect of Oxygen on Elastic Modulus and Mechanical Property of Metastable β TiNbO Based Alloys". In Advanced Biomaterials VII, 549–52. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-436-7.549.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Β-Metastable"
Illarionov, A. G., S. I. Stepanov e S. L. Demakov. "Fracture surface analysis of a quenched (α+β)-metastable titanium alloy". In MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2017): Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Author(s), 2017. http://dx.doi.org/10.1063/1.5017369.
Texto completo da fonteIvasishin, Orest, Pavlo Markovsky, Marta Pozuelo e Sergey V. Prikhodko. "Effect of Severe Hot Forging and Rolling on Microstructure, Texture and Tensile Properties of Titanium Metastable Beta-Alloys". In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63767.
Texto completo da fonteLi, Zhuoqun, e Xin Wu. "Inner Surface Cracking of an Aluminum Alloy in Small-Radius Bending". In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42976.
Texto completo da fonteBabanli, Mustafa, Sayami Huseynov, Lesya Demchenko, Vusal Huseynov e Anatoliy Titenko. "Effect of Low-Temperature Aging on Mechanical Behavior of Metastable β-Type Ti-Mo-Sn Alloys". In 2022 IEEE 12th International Conference Nanomaterials: Applications & Properties (NAP). IEEE, 2022. http://dx.doi.org/10.1109/nap55339.2022.9934634.
Texto completo da fonteGutierrez, S., e F. Gitzhofer. "Induction Plasma Synthesis of MoSi2 Ultrafine Powders". In ITSC2001, editado por Christopher C. Berndt, Khiam A. Khor e Erich F. Lugscheider. ASM International, 2001. http://dx.doi.org/10.31399/asm.cp.itsc2001p0211.
Texto completo da fonteHagen, Alexander R., Thomas F. Grimes, Brian C. Archambault, Trevor N. Harris e Rusi P. Taleyarkhan. "Characterization and Optimization of a Tensioned Metastable Fluid Nuclear Particle Sensor Using Laser Based Profilimetry". In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30325.
Texto completo da fonteChakravarty, H., J. Ballor e C. J. Boehlert. "Effect of Alloying Additions of Aluminium and Iron on the Creep Resistance of Ti-12Cr (wt.%)". In HT2019. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.ht2019p0355.
Texto completo da fonteWestphal, Moritz, Ralf Engels, Nicolas Faatz, Chrysovalantis Kannis, Berthold Klimczok, Aditya Mandiwal, Maike Maubach e Helmut Soltner. "Measurement of the occupation number of metastable atoms in the hyperfine-substate β$_3$ in an atomic hydrogen beam". In 19th Workshop on Polarized Sources, Targets and Polarimetry. Trieste, Italy: Sissa Medialab, 2023. http://dx.doi.org/10.22323/1.433.0007.
Texto completo da fonteYumak, Nihal, Kubilay Aslantas e Waleed Ahmed. "Effect of Aging Treatment on the Initiation and Propagation of Fatigue Cracks in the Ti-15V-3Al-3Sn-3Cr Metastable β Titanium Alloy". In 2020 Advances in Science and Engineering Technology International Conferences (ASET). IEEE, 2020. http://dx.doi.org/10.1109/aset48392.2020.9118214.
Texto completo da fonte"Production of thermally stable alloyed carbon composite materials containing g-C3N4, β-Si3N4 and Si2N2O phases". In II All-Russian Scientific Conference "Science, Technology, Society". Krasnoyarsk Science and Technology City Hall, 2022. http://dx.doi.org/10.47813/nto.2.2022.5.14-25.
Texto completo da fonte