Literatura científica selecionada sobre o tema "Zr-based alloys"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Zr-based alloys".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Zr-based alloys"
Dong, Quan, e Jun Tan. "Advances in Zr-Based Alloys". Crystals 14, n.º 4 (7 de abril de 2024): 351. http://dx.doi.org/10.3390/cryst14040351.
Texto completo da fonteLee, Dong-Myoung, Ju-Hyun Sun, Dong-Han Kang, Seung-Yong Shin e Chi-Whan Lee. "Experimental investigation of Zr-rich Zr–Zr2Ni–(Zr,Ti)2Ni ternary eutectic system". Journal of Materials Research 24, n.º 7 (julho de 2009): 2338–45. http://dx.doi.org/10.1557/jmr.2009.0268.
Texto completo da fonteYoshihara, Michiko. "Influence of Zr Addition on Oxidation Behavior of TiAl-Based Alloys". Materials Science Forum 696 (setembro de 2011): 360–65. http://dx.doi.org/10.4028/www.scientific.net/msf.696.360.
Texto completo da fonteOkai, Daisuke, Kentaro Mori, Gaku Motoyama, Hisamichi Kimura e Hidemi Kato. "Amorphousization and Superconducting Property for Zr-Nb Based Alloy". Materials Science Forum 783-786 (maio de 2014): 2503–8. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.2503.
Texto completo da fonteNagy, E., Dóra Janovszky, Mária Svéda, Kinga Tomolya, L. K. Varga, Jenő Sólyom e András Roósz. "Investigation of Crystallization in an Amorphous Cu-Based Alloy by X-Ray". Materials Science Forum 589 (junho de 2008): 131–36. http://dx.doi.org/10.4028/www.scientific.net/msf.589.131.
Texto completo da fonteHan, Yu, Bao An Chen, Zhi Xiang Zhu, Dong Yu Liu e Yan Qiu Xia. "Effects of Zr on Microstructure and Conductivity of Er Containing Heat-Resistant Aluminum Alloy Used for Wires". Materials Science Forum 852 (abril de 2016): 205–10. http://dx.doi.org/10.4028/www.scientific.net/msf.852.205.
Texto completo da fonteMatsumoto, N., Yasuyuki Kaneno e Takayuki Takasugi. "Strengthening and Ductilization of D03-Type Fe3Al Intermetallic Alloys by Dispersion of Laves Phases Fe2Zr and Fe2Nb". Materials Science Forum 561-565 (outubro de 2007): 395–98. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.395.
Texto completo da fonteYang, Kun, Yanghe Wang, Jingjing Tang, Zixuan Wang, Dechuang Zhang, Yilong Dai e Jianguo Lin. "Phase Field Study on the Spinodal Decomposition of β Phase in Zr–Nb-Ti Alloys". Materials 16, n.º 8 (8 de abril de 2023): 2969. http://dx.doi.org/10.3390/ma16082969.
Texto completo da fonteCao, Peng Jun, Ji Ling Dong e Hai Dong Wu. "Research on Cu-Based Bulk Glassy Alloys and its Mechanical Properties". Applied Mechanics and Materials 329 (junho de 2013): 127–32. http://dx.doi.org/10.4028/www.scientific.net/amm.329.127.
Texto completo da fonteDEY, G. K., R. T. SAVALIA, S. NEOGY, R. TEWARI, D. SRIVASTAVA e S. BANERJEE. "FORMATION OF NANOCRYSTALS IN ZIRCONIUM-BASED ALLOYS". International Journal of Nanoscience 04, n.º 05n06 (outubro de 2005): 901–7. http://dx.doi.org/10.1142/s0219581x05003863.
Texto completo da fonteTeses / dissertações sobre o assunto "Zr-based alloys"
Scarfone, Roberto. "Mechanical spectroscopy of Zr-based bulk glass forming alloys". [S.l. : s.n.], 2002. http://deposit.ddb.de/cgi-bin/dokserv?idn=964907925.
Texto completo da fontePauly, Simon. "Phase formation and mechanical properties of metastable Cu-Zr-based alloys". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-39545.
Texto completo da fonteAsgharzadeh, Javid Fatemeh. "Phase formation, martensitic transformation and mechanical properties of Cu-Zr-based alloys". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-210276.
Texto completo da fonteThe fact that the presence of Co extends the stability range of B2 CuZr to room temperature, together with the significant effect of Al on improving the glass forming ability of the CuZr system was the motivation to investigate the ternary and quaternary CuZr alloys with the aim of synthesizing BMG composites containing B2 (Cu,Co)Zr crystals. This PhD thesis deals with preparation and characterization of Cu50-xCoxZr50 (0 ≤ x ≤ 20) and Cu50-xCoxZr45Al5 (x = 2, 5, 10 and 20) alloys. The phase formation, thermal stability, microstructure, martensitic transformation and mechanical properties of these alloys were investigated. The dependence of phase formation on solidification rate and the thermodynamically stability of Cu-Co-Zr alloys reveals that the addition of Co decreases the glass forming ability (GFA) of the Cu-Co-Zr alloys and changes the stable crystalline products of the system from Cu10Zr7 + CuZr2 to (Cu,Co)Zr phase with a B2 structure. The results indicate that for the melt-spun ribbons with at least 5 % Co, the glass crystallizes directly into B2 (Cu,Co)Zr, while in the case of bulk specimens, compositions with 0 ≤ x < 5 of Co contain the monoclinic (Cu,Co)Zr phase and Cu10Zr7 and CuZr2, whereas, for x ≥ 10, the B2 (Cu,Co)Zr phase is the equilibrium phase at room temperature. Furthermore, increasing the cobalt content decreases the martensitic transformation temperatures to lower temperatures. The phase formation in the ternary system is summarized in a pseudo-binary (Cu,Co)Zr phase diagram, that helps for designing new shape memory alloys, as well as bulk metallic glass composites with the addition of glass former elements. In the quaternary alloys, Al increases the glass transition and crystallization temperatures and hence improves the GFA of the system. The X-ray analysis illustrates that for the melt-spun ribbons, the crystallization products vary from Cu10Zr7 + CuZr2 + AlCu2Zr to (Cu,Co)Zr + AlCu2Zr when Co ≤ 5 and Co ≥ 10, respectively. Depending on the cooling rates, the bulk samples represent a fully amorphous structure or BMG composites or a fully crystalline structure. For Co ≤ 5, beside (Cu,Co)Zr and AlCu2Zr, Cu10Zr7 exists as well. Scanning (SEM) and transmission (TEM) electron microscopy investigations were done to investigate the effect of Al and Co addition to the microstructure of CuZr alloys. In the case of Cu-Co-Zr-Al alloys, Cu30Co20Zr45Al5 (ɸ = 4 mm) and Cu45Co5Zr45Al5 (ɸ = 2 mm) compositions were selected for the microstructure verification using TEM. Later, the heterogeneity of the microstructure in Cu40Co10Zr45Al5 (ɸ = 2 mm) alloy was considered. The effect of Co on the mechanical properties of rapidly solidified Cu50-xCoxZr50 (x = 2, 5, 10 and 20 at.%) alloys depict that the deformation behavior of the rods under compressive loading strongly depends on the microstructure, and as a results, on the alloy composition. Cobalt affects the fracture strength of the as-cast samples; and deformation is accompanied with two yield stresses for high Co-content alloys, which undergo deformation-induced martensitic transformation. Instead samples with a martensitic structure show a work-hardening behavior. For quaternary alloys, the effects of cooling rate and chemical composition on mechanical properties of the alloys were investigated. Cu48Co2Zr45Al5 (ɸ= 1.5, 2, 3 and 4 mm) and Cu45Co5Zr45Al5 (ɸ = 3 mm) compositions were selected to discuss the effect of cooling rate and heterogeneity, respectively. The results depict that the mechanical properties of Cu50-xCoxZr45Al5 alloys strongly depend on the microstructure and the volume fraction of the amorphous and crystalline phases. The deformation-induced martensitic transformation of Cu40Co10Zr50 and Cu40Co10Zr45Al5 as-cast rods, was studied by means of high-energy X-rays. The in situ compression measurements were performed in track control and load control modes. The macroscopic and microscopic stress-strain behavior, as well as the phase transformation kinetics were considered. The relative changes in the fully integrated intensity of the selected B2 and martensite peaks, which indicate the changes in volume fraction of the corresponding phases under deformation, was described as phase transformation volume, M/M+B2
Waniuk, Theodore Andrew Johnson W. L. "Viscosity and crystallization in a series of Zr-based bulk amorphous alloys /". Diss., Pasadena, Calif. : California Institute of Technology, 2004. http://resolver.caltech.edu/CaltechETD:etd-06102004-214551.
Texto completo da fonteKobold, Raphael [Verfasser], Dieter M. [Gutachter] Herlach e Ulrich [Gutachter] Köhler. "Crystal growth in undercooled melts of glass forming Zr-based alloys / Raphael Kobold. Gutachter: Dieter M. Herlach ; Ulrich Köhler". Bochum : Ruhr-Universität Bochum, 2016. http://d-nb.info/1109051654/34.
Texto completo da fontePauly, Simon [Verfasser], Jürgen [Akademischer Betreuer] Eckert e Gianaurelio [Akademischer Betreuer] Cuniberti. "Phase formation and mechanical properties of metastable Cu-Zr-based alloys / Simon Pauly. Gutachter: Jürgen Eckert ; Gianaurelio Cuniberti. Betreuer: Jürgen Eckert". Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://d-nb.info/1069938998/34.
Texto completo da fonteAsgharzadeh, Javid Fatemeh [Verfasser], Jürgen [Akademischer Betreuer] Eckert e Michael [Gutachter] Zehetbauer. "Phase formation, martensitic transformation and mechanical properties of Cu-Zr-based alloys / Fatemeh Asgharzadeh Javid ; Gutachter: Michael Zehetbauer ; Betreuer: Jürgen Eckert". Dresden : Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://d-nb.info/1119362547/34.
Texto completo da fonteBorroto, Ramírez Alejandro. "Synthesis, structure and properties of zirconium-based binary alloy thin films". Electronic Thesis or Diss., Université de Lorraine, 2019. http://www.theses.fr/2019LORR0057.
Texto completo da fonteIn this thesis, we demonstrate that original nanostructures can be obtained by working around the crystalline-to-amorphous transition in sputter-deposited thin films. In particular, we study two systems, Zr-Mo and Zr-W, in which such transition occurs. By decreasing the Mo content in the Zr-Mo system, a structural transition from a nanocrystalline solid solution of Zr in the bcc lattice of Mo to an amorphous structure can be achieved around 60 at% Mo. The films obtained present high hardness H, low Young's modulus E and, consequently, high H/E ratio compared with bulk Zr and Mo. Furthermore, we demonstrate that a self-separation of the nanocrystalline and the amorphous phases occurs at the composition intermediate to those necessary to form single-phased amorphous and nanocrystalline films. The particular geometry in which the nanocrystalline phase grows in competition with the amorphous phase is exploited to achieve a thickness-controlled surface morphology which allows to tune the film reflectance. A model was developed to describe the kinetics of the competitive growth between the nanocrystalline and the amorphous phases. Furthermore, it allows to construct a thickness-composition phase diagram evidencing that the nanocrystalline/amorphous competitive growth is easily hidden experimentally. Finally, we demonstrate that massive monocrystalline grains with lateral size larger than 1 µm can be obtained by working at low Ar pressure if the composition of the films approaches to the edge of the amorphous transition. Our results suggest that the phenomena reported here for Zr-Mo and Zr-W can be extended to other systems
Corwin, Peter E. "Synthesis and Characterization of Titanium Zirconium Based Alloys for Capacitor Use". Case Western Reserve University School of Graduate Studies / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=case1363616395.
Texto completo da fonteSobol, O. V., A. A. Andreev e V. Gorban. "Structural-Strained State and Mechanical Characteristics of Single-Phase Vacuum-Arc Coatings of Multicomponent High Entropy System Ti-V-Zr-Nb-Hf and Nitrides Based On It". Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34808.
Texto completo da fonteLivros sobre o assunto "Zr-based alloys"
K, Soppet W., U.S. Nuclear Regulatory Commission. Division of Systems Analysis and Regulatory Effectiveness. e Argonne National Laboratory, eds. Air oxidation kinetics for Zr-based alloys. Washington, D.C: U.S. Nuclear Regulatory Commission, Division of Systems Analysis and Regulatory Effectiveness, Office of Nuclear Regualtory Research, 2004.
Encontre o texto completo da fonteRen, Binyan. The recrystallization of an Al-Li-Zr based alloy. 1988.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Zr-based alloys"
Bhattacharjee, T., T. T. Sasaki, B. C. Suh, T. Nakata, S. Kamado, N. J. Kim e K. Hono. "Role of Zr in the Microstructure Evolution in Mg-Zn-Zr Based Wrought Alloys". In Magnesium Technology 2015, 209–13. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093428.ch39.
Texto completo da fonteBhattacharjee, T., T. T. Sasaki, B. C. Suh, T. Nakata, S. Kamado, N. J. Kim e K. Hono. "Role of Zr in the Microstructure Evolution in Mg-Zn-Zr Based Wrought Alloys". In Magnesium Technology 2015, 209–13. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48185-2_39.
Texto completo da fonteTakasaki, Akito, Łukasz Gondek, Joanna Czub, Alicja Klimkowicz, Antoni Żywczak e Konrad Świerczek. "Hydrogen Storage in Ti/Zr-Based Amorphous and Quasicrystal Alloys". In Hydrogen Storage Technologies, 117–45. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119460572.ch4.
Texto completo da fonteFukumoto, Shinji, Kana Fujiwara, Yoshihiko Yokoyama, Yoshihiro Murakami e Atsushi Yamamoto. "Small-Scale Resistance Spot Welding of Zr Based Glassy Alloys". In Materials Science Forum, 1307–10. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.1307.
Texto completo da fonteGosmanová, Galina, Ivo Kraus, Michal Kolega e Věra Vrtílková. "X-Ray Diffraction Analysis of Oxide Layers of Zr-Based Alloys". In Materials Science Forum, 237–40. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-469-3.237.
Texto completo da fonteIsaenkova, Margarita, Yuriy Perlovich, V. Fesenko, Thant Zaw Htike, S. Kropachev, S. Akhtonov e V. Filippov. "Plastic Deformation of Zr-Based Alloys at Temperatures of Phase Transformations". In Materials Science Forum, 637–42. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-434-0.637.
Texto completo da fonteSinning, H. R., I. S. Golovin e A. Jianu. "Mechanical Spectroscopy of Quasicrystal Formation from Amorphous Ti- and Zr-based Alloys". In Solid State Transformation and Heat Treatment, 135–43. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527604839.ch17.
Texto completo da fonteIsaenkova, Margarita, e Yuriy Perlovich. "Texture Aspects of Delayed Hydride Cracking in Products from Zr-Based Alloys". In Ceramic Transactions Series, 539–46. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470444191.ch60.
Texto completo da fonteLee, Dong Geun, Yont Tai Lee, Jong Taek Yeon, Jeoung Han Kim, Nho Kwang Park e Sung Hak Lee. "Effect of Crystalline Phase on Dynamic Deformation Properties of Zr-Based BMG Alloys". In THERMEC 2006, 5031–36. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.5031.
Texto completo da fonteIsaenkova, Margarita, e Yuriy Perlovich. "Distribution of Dislocation Density in Tubes from Zr-Based Alloys by X-Ray Data". In Solid State Phenomena, 89–94. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/3-908451-09-4.89.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Zr-based alloys"
"Production and Study of the Structure of Novel Superelastic Ti-Zr-Based Alloy". In Shape Memory Alloys 2018. Materials Research Forum LLC, 2018. http://dx.doi.org/10.21741/9781644900017-9.
Texto completo da fonteGosmanová, Galina, Ivo Kraus, Michal Kolega e Věra Vrtílková. "X-ray diffraction analysis of oxidized Zr-based alloys". In SPIE Proceedings, editado por Alexander I. Melker e Teodor Breczko. SPIE, 2006. http://dx.doi.org/10.1117/12.726775.
Texto completo da fonteGosmanova, Galina, Ivo Kraus e Nikolaj Ganev. "X-ray stress analysis of oxidized Zr-based alloys". In Fifth International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering, editado por Alexander I. Melker. SPIE, 2002. http://dx.doi.org/10.1117/12.456272.
Texto completo da fonteWei, T. G., C. S. Long, B. F. Luan, Z. Miao, W. Wang e L. Chen. "Microstructure and Performance of Zr-1.0Cr-0.4Fe-xMo Alloys". In 2013 21st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icone21-15920.
Texto completo da fonteYao, M. Y., B. X. Zhou, Q. Li, W. P. Zhang, L. Zhu, L. H. Zou, J. L. Zhang e J. C. Peng. "Effect of Bi Addition on the Corrosion Behavior of Zirconium Alloys". In 2013 21st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icone21-15460.
Texto completo da fonteGao, Changyuan, Lin Shi, Guoliang Zhang, Yang Xu, Minli Chen, Liutao Chen e Jun Tan. "Study on Out-Pile Performance of CZ Zirconium Alloy Guide Tube". In 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-93816.
Texto completo da fonteGosmanova, Galina, Ivo Kraus e Nikolaj Ganev. "Residual stresses in oxide layers and corrosion kinetics of Zr-based alloys". In SPIE Proceedings, editado por Alexander I. Melker. SPIE, 2003. http://dx.doi.org/10.1117/12.517960.
Texto completo da fonteKharchenko, Dmytro, Vasyl Kharchenko, Olha Shchokotova, Rongian Pan, Tianyuan Xin e Lu Wu. "Martensitic Transformation in Nanostructured ZrO2 Films in Zr-based Alloys". In 2023 IEEE 13th International Conference Nanomaterials: Applications & Properties (NAP). IEEE, 2023. http://dx.doi.org/10.1109/nap59739.2023.10310686.
Texto completo da fonteGao, Yingqi, Ben Wang, Jianguo Cao, Qianqian Luo, Yuan Cao, Zhihao Zhang, Lian Wang e Bo Gao. "High-Temperature Deformation Constitutive Relationship of Zr-Sn-Nb Alloy for Nuclear Power". In 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-92123.
Texto completo da fonteCai, Guang-bo, Ya-dong Zhang, Yu-xiang Han e Jia-pei Yu. "Analyzing the Impact of Solutes on PKA Spectrum for Simulation of Neutron Induced-Radiation Damage in Zr-Based Metals". In 2018 26th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/icone26-82132.
Texto completo da fonteRelatórios de organizações sobre o assunto "Zr-based alloys"
Janney, Dawn E., e Cynthia Papesch. Metallic Fuels Handbook, Part 1: Alloys Based on U-Zr, Pu-Zr, U-Pu, or U-Pu-Zr, Including Those with Minor Actinides (Np, Am, Cm), Rare-earth Elements (La, Ce, Pr, Nd, Gd), and Y; and Part 2: Elements and Alloys not Based on U-Zr, Pu-Zr, U-Pu, or U-Pu-Zr. Office of Scientific and Technical Information (OSTI), agosto de 2017. http://dx.doi.org/10.2172/1504934.
Texto completo da fonteYu, J., C. Jiang e Y. Zhang. Calculations of hydrogen diffusivity in Zr-based alloys: Influence of alloying elements and effect of stress. Office of Scientific and Technical Information (OSTI), junho de 2017. http://dx.doi.org/10.2172/1376196.
Texto completo da fonteTome, Carlos, Wei Wen e Laurent Capolungo. Mechanism-based modeling of solute strengthening: application to thermal creep in Zr alloy. Office of Scientific and Technical Information (OSTI), agosto de 2017. http://dx.doi.org/10.2172/1373532.
Texto completo da fonteOlson, L. N. Chemical durability and degradation mechanisms of HT9 based alloy waste forms with variable Zr content. Office of Scientific and Technical Information (OSTI), outubro de 2015. http://dx.doi.org/10.2172/1225177.
Texto completo da fonteShi, Zhan. Microstructural characterization of a Zr-Ti-Ni-Mn-V-Cr based AB2-type battery alloy. Office of Scientific and Technical Information (OSTI), janeiro de 1999. http://dx.doi.org/10.2172/754785.
Texto completo da fonte