Bibliografias temáticas / Xi feng jiu chang

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros

Literatura científica selecionada sobre o tema "Xi feng jiu chang"

Autor: Grafiati
Publicado: 25 de julho de 2024
Última modificação: 31 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Xi feng jiu chang".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Xi feng jiu chang"

1

Zheng, Ze-Yi, Anran Chen, Eric Jaehnig, Meenakshi Anurag, Jonathan Lei, Chenwei Wang, Long Feng et al. "Abstract GS01-08: CDK4/6 inhibition is a potential vulnerability in NF1-depleted ER+ breast cancer". Cancer Research 84, n.º 9_Supplement (2 de maio de 2024): GS01–08—GS01–08. http://dx.doi.org/10.1158/1538-7445.sabcs23-gs01-08.

Texto completo da fonte
Resumo:
Abstract CDK4/6 control a key checkpoint by phosphorylating Rb, leading to Rb degradation and subsequent S-phase entry. CDK4/6 inhibition, together with endocrine therapy, is standard of care for advanced ER+ breast cancer; however, CDK4/6 inhibition typically is cytostatic. This study aims to identify breast cancer patients who may better respond to treatments targeting CDK4/6. NF1/neurofibromin is a key tumor suppressor that we have shown can represses not only RAS as a GAP but also ER as a transcriptional co-repressor. Dual activation of RAS and ER promotes endocrine therapy resistance. We computed kinase activity scores from phosphor-proteomic data in the CPTAC breast cancer cohort and found that both CDK4/6 activity scores and Rb-pS780 levels negatively correlated with NF1 protein levels. Furthermore, NF1 mutations co-occur with mutations in CDK4/6 and CCND1-3 in breast tumors. These results suggest a functional dependency between NF1 loss and activation of the CDK4/6-Rb pathway. To delineate how NF1 and CDK4 interact molecularly, we depleted NF1 in ER+ breast cancer cells and found an increase in Rb-pS780 and in phosphorylation in CDK4’s activation loop (CDK4-pT172). Cyclin-D binding is required for CDK4 activation. CCND1 expression is under the direct control by ER, and upon NF1-depletion, Cyclin D1 expression was increased, partly due to enhanced ER recruitment to an ERE in CCND1. Cyclin-D-bound CDK4 must be phosphorylated at T172 to be fully active; however, what kinase is responsible for this is largely unknown. We have evidence that CDK4-T172 phosphorylation is RAF, but not ERK, dependent. When the NF1-depleted ER+ cells were seeded in the presence of fulvestrant together with either palbociclib or abemaciclib, apoptosis readily occurred. Remarkably, fulvestrant plus palbociclib efficiently caused durable tumor regression in two ER+ PDX models, in which NF1 is undetectable by IHC. In contrast, no tumor regression was seen in a PDX model with detectable NF1. Finally, greater growth inhibition and apoptosis were detected in NF1-low tumors in the neoadjuvant NeoPalAna trial when palbociclib was added after anastrozole. These data support a model whereby ER and RAS signaling converge upon CDK4/6, and CDK4/6 activation is a key survival mechanism when ER signaling is attenuated by treatment in NF1-depleted ER+ breast cancer cells. This apparent addiction for CDK4/6 activity makes NF1-depleted ER+ breast tumors vulnerable to CDK4/6 inhibition, thus creating a potential therapeutic opportunity to match CDK4/6 inhibition with patients who can benefit the most. Citation Format: Ze-Yi Zheng, Anran Chen, Eric Jaehnig, Meenakshi Anurag, Jonathan Lei, Chenwei Wang, Long Feng, Purba Singh, Hilda Kennedy, Jin Cao, Ghazal Yadav, Jill Tsai, Xi Chen, Charles Foulds, Bora Lim, Matthew Ellis, Bing Zhang, Eric Chang. CDK4/6 inhibition is a potential vulnerability in NF1-depleted ER+ breast cancer [abstract]. In: Proceedings of the 2023 San Antonio Breast Cancer Symposium; 2023 Dec 5-9; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2024;84(9 Suppl):Abstract nr GS01-08.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Guo, Sheng-xuan, Rui-ben Li, Si-yuan Hu, Qiu-han Cai, Cheng-liang Zhong e Rui-min Hao. "Efficacy and safety of Jiu-Wei-Xi-Feng granules for treating tic disorders in children: study protocol for a randomized controlled equivalence trial". Trials 23, n.º 1 (22 de outubro de 2022). http://dx.doi.org/10.1186/s13063-022-06802-y.

Texto completo da fonte
Resumo:
Abstract Background Tic disorders (TD) is a neuropsychiatric disease with twitch as the main manifestation in childhood. Jiu-Wei-Xi-Feng granules has been marketed in China for treating children with TD. As Long Gu (Os Draconis) in the composition of this Chinese patent medicine is a rare and expensive medicinal material protected by the Chinese government, therefore, we consider replacing it with Mu Li (Concha Ostreae) that has the same effect and is cheaper. This study is designed to evaluate the clinical equivalence between Jiu-Wei-Xi-Feng granules (Os Draconis replaced by Concha Ostreae) (JWXFD) and Jiu-Wei-Xi-Feng granules (original formula) (JWXFO) in children with TD (consumption of renal yin and liver wind stirring up internally syndrome). Methods/design This is a multicenter, randomized, double-blind, equivalence trial comparing the efficacy and safety of JWXFD and JWXFO in treating Children with tic disorders (consumption of renal yin and liver wind stirring up internally syndrome). A total of 288 patients will be recruited and randomly assigned to two groups in a 1:1 ratio. The treatment course is 6 weeks, with a 2 weeks follow-up. The primary outcome is the mean change value from baseline to 6th week by the Yale Global Tic Severity Scale total tic score (YGTSS-TTS). Secondary outcomes include total effective rate of tic, Yale Global Tic Severity Scale (YGTSS) scores and its factor scores (the degree of motor tics, phonic tics and social function damage), Clinical Global Impression-Severity scale, and TCM syndrome efficacy. Discussion The design of this study refers to a large number of similar research design points, and asked for opinions of peer experts, and finally reached a consensus. This trial will provide high-quality evidence on the clinical equivalence between JWXFD and JWXFO and provide a basis for the marketing of JWXFD. Trial registration ChiCTR2000032312 Registered on 25 April 2020, http://www.chictr.org.cn/showproj.aspx?proj=52630
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

WU, Shuoxian. "Construction of Multisensory Landscape and Integration of Soundscape, Smellscape and Lightscape in Traditional Chinese Gardens". Journal of South Architecture 1, n.º 2 (18 de junho de 2024). http://dx.doi.org/10.33142/jsa.v1i2.12575.

Texto completo da fonte
Resumo:
This paper proposes the concept of multisensory landscape construction, pointing out that people’s perception and appreciation of a landscape is a process of overall impression and judgment formed with a combination of visual, auditory, olfactory, tactile, and even thermal and humid sense. Examples can be found in many famous traditional Chinese gardens. Around the West Lake area, there are famous soundscape scenic spots, e.g., Liu Lang Wen Ying (Orioles Singing in the Willows), Nan Ping Evening Bell (Evening Bell Ringing at the Nanping Hill), Zhejiang Qiu Tao (Autumn Wave of Zhejiang), and Jiu Li Song Tao (Wave of Pine Trees Lasts Nine Miles) . There are also some famous lightscape scenic spots, e.g., San Tan Ying Yue (Moon and Candlelight Mirrored in the Lake) and Ping Hu Qiu Yue (Moon over the Peaceful Lake in Autumn) . In terms of smellscape, in addition to the famous scenic spot Qu Yuan Feng He (Curved Yard and Lotus Pool in Summer), the West Lake area is also widely planted with osmanthus and other fragrant plants, forming a smellscape in which "late autumn is fragrant with osmanthus flowers and lotus in bloom for miles and miles." At Humble Administrator Garden, there are soundscape scenic spots such as Wu Zhu You Ju (Secluded Residence among Bamboo Bushes) and Liu Ting Ge (Pavilion to Pause and Listen); there are smellscape scenic spots such as the Orchid Field, the Magnolia Courtyard, the Panicum Pavilion, etc.; lightscape scenic spots such as Liu Ying Ge (Hall of Reflecting Shadows) and Ta Ying Ting (Pavilion of Shadow of Tower) can also be found there. In Chengde Summer Resort, there are soundscape scenic spots such as Wan He Song Feng (Wind of Ten Thousand Ravines and Pines) and lightscape scenic spots such as Xi Ling Chen Xia (Morning Sunset on West Ridge), etc.; smellscape scenic spots such as Qu Shui Hua Xiang (Fragrance of Flowers in the Curved Water) and Yuan Xiang Tang (Hall of Fragrance of Far Away) can also be found.The above classic cases eloquently prove that the creation of multisensory landscape and the integration of them are the valuable experience in traditional Chinese gardens, which play an important role in the achievement of famous landscape.Therefore, the design of landscape must pay attention to the creation and integration of soundscape, smellscape and lightscape. Another key point of the theory of multisensory landscape construction is that it is necessary to pay attention to both spatial and temporal dimensions so that the constructed landscape can be enjoyed everywhere and at all time periods. In this regard, the creation of the three-scape (specifically refer to soundscape, smellscape and lightscape) can also highlight their regional and temporal characteristics. By analyzing some classic cases of traditional Chinese gardens, this paper proposes that the construction of multisensory landscape and the integration of soundscape, smellscape and lightscape are the valuable experience in traditional Chinese gardens, which are also important for the achievement of famous landscapes and are excellent traditions that we should vigorously inherit and carry forward.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Sk, Farooq. "Journal Vol – 15 No -7, July 2020 Journal > Journal > Journal Vol – 15 No -7, July 2020 > Page 6 PERFORMANCE AND EMISSION CHARACTERISTICS OF GASOLINE-ETHANOL BLENDS ON PFI-SI ENGINE Authors: D.Vinay Kumar ,G.Samhita Priyadarsini,V.Jagadeesh Babu,Y.Sai Varun Teja, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00051 admin July 26, 2020 Abstract: Alcohol based fuels can be produced from renewable energy sources and has the potential to reduce pollutant emissions due to their oxygenated nature. Lighter alcohols like ethanol and methanol are easily miscible with gasoline and by blending alcohols with gasoline; a part of conventional fuel can be replaced while contributing to fuel economy. Several researchers tested various ethanol blends on different engine test rigs and identified ethanol as one of the most promising ecofriendly fuels for spark ignition engine. Its properties high octane number, high latent heat of vaporization give better performance characteristics and reduces exhaust emissions compared to gasoline. This paper focuses on studying the effects of blending 50 of ethanol by volume with gasoline as it hardly needs engine modifications. Gasoline (E0) and E50 fuels were investigated experimentally on single-cylinder, four-stroke port fuel injection spark ignition engine by varying engine speed from 1500 rpm to 3500 rpm. Performance Characteristics like torque, brake power, specific fuel consumption, and volumetric efficiency and exhaust emissions such as HC, CO, CO2, NOx were studied.. Keywords: Ethanol,Emissions,Gasoline,Port fuel Injection, Refference: I Badrawada, I. G. G., and A. A. P. Susastriawan. “Influence of ethanol–gasoline blend on performance and emission of four-stroke spark ignition motorcycle.” Clean Technologies and Environmental Policy (2019): 1-6. II Doğan, Battal, et al. “The effect of ethanol-gasoline blends on performance and exhaust emissions of a spark ignition engine through exergy analysis.” Applied Thermal Engineering 120 (2017): 433-443. III Efemwenkiekie, U. Ka, et al. “Comparative Analysis of a Four Stroke Spark Ignition Engine Performance Using Local Ethanol and Gasoline Blends.” Procedia Manufacturing 35 (2019): 1079-1086. IV Galloni, E., F. Scala, and G. Fontana. “Influence of fuel bio-alcohol content on the performance of a turbo-charged, PFI, spark-ignition engine.” Energy 170 (2019): 85-92. V Hasan, Ahmad O., et al. “Impact of changing combustion chamber geometry on emissions, and combustion characteristics of a single cylinder SI (spark ignition) engine fueled with ethanol/gasoline blends.” Fuel 231 (2018): 197-203. VI Mourad, M., and K. Mahmoud. “Investigation into SI engine performance characteristics and emissions fuelled with ethanol/butanol-gasoline blends.” Renewable Energy 143 (2019): 762-771. VII Singh, Ripudaman, et al. “Influence of fuel injection strategies on efficiency and particulate emissions of gasoline and ethanol blends in a turbocharged multi-cylinder direct injection engine.” International Journal of Engine Research (2019): 1468087419838393. VIII Thakur, Amit Kumar, et al. “Progress in performance analysis of ethanol-gasoline blends on SI engine.” Renewable and Sustainable Energy Reviews 69 (2017): 324-340. View Download Journal Vol – 15 No -7, July 2020 CHARACTERIZATION OF MATERIALS FOR CUSTOMIZED AFO USING ADDITIVE MANUFACTURING Authors: Gamini Suresh,Nagarjuna Maguluri,Kunchala Balakrishna, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00052 admin July 26, 2020 Abstract: Neurodegenerative conditions and compressed nerves often cause an abnormal foot drop that affects an individual gait and make it difficult to walk normally. Ankle Foot Orthosis (AFO) is the medical device which is recommended for the patients to improve the walking ability and decrease the risk of falls. Custom AFOs provide better fit, comfort and performance than pre-manufactured ones. The technique of 3D-printing is suitable for making custom AFOs. Fused deposition modelling (FDM) is a 3D-printing method for custom AFO applications with the desired resistance and material deposition rate. Generally, FDM is a thermal process; therefore materials thermal behaviour plays an important role in optimizing the performance of the printed parts. The objective of this study is to evaluate the thermal behaviour of PLA, ABS, nylon and WF-PLA filaments before manufacturing the AFO components using the FDM method. In the study, the sequence of testing materials provides a basic measuring method to investigate AFO device parts thermal stability. Thermal analysis (TG/DTG and DSC) was carried out before 3D printing is to characterize the thermal stability of each material. Keywords: Additive Manufacturing,Ankle Foot Orthosis (AFO),FusedDeposition Modelling,ThermalAnalysis, Refference: I. J. Pritchett, “Foot drop: Background, Anatomy, Pathophysiology,” Medscape Drugs, Dis. Proced., vol. 350, no. apr27_6, p. h1736, 2014. II. J. Graham, “Foot drop: Explaining the causes, characteristics and treatment,” Br. J. Neurosci. Nurs., vol. 6, no. 4, pp. 168–172, 2010. III. Y. Feng and Y. Song, “The Categories of AFO and Its Effect on Patients With Foot Impair: A Systemic Review,” Phys. Act. Heal., vol. 1, no. 1, pp. 8–16, 2017. IV. J. H. P. Pallari, K. W. Dalgarno, J. Munguia, L. Muraru, L. Peeraer, S. Telfer, and J. Woodburn” Design and additive fabrication of foot and ankle-foot orthoses”21st Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, SFF 2010 (2010) 834-845 V. Y. Jin, Y. He, and A. Shih, “Process Planning for the Fuse Deposition Modeling of Ankle-Foot-Othoses,” Procedia CIRP, vol. 42, no. Isem Xviii, pp. 760–765, 2016. VI. R. K. Chen, Y. an Jin, J. Wensman, and A. Shih, “Additive manufacturing of custom orthoses and prostheses-A review,” Addit. Manuf., vol. 12, pp. 77–89, 2016. VII. A. D. Maso and F. Cosmi, “ScienceDirect 3D-printed ankle-foot orthosis : a design method,” Mater. Today Proc., vol. 12, pp. 252–261, 2019. VIII. B. Yuan et al., “Designing of a passive knee-assisting exoskeleton for weight-bearing,” in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2017, vol. 10463 LNAI, pp. 273–285. IX. R. Spina, B. Cavalcante, and F. Lavecchia, “Diment LE, Thompson MS, Bergmann JHM. Clinical efficacy and effectiveness of 3D printing: a systematic review.,” AIP Conf. Proc., vol. 1960, 2018. X. M. Srivastava, S. Maheshwari, T. K. Kundra, and S. Rathee, “ScienceDirect Multi-Response Optimization of Fused Deposition Modelling Process Parameters of ABS Using Response Surface Methodology ( RSM ) -Based Desirability Analysis,” Mater. Today Proc., vol. 4, no. 2, pp. 1972–1977, 2017. XI. E. Malekipour, S. Attoye, and H. El-Mounayri, “Investigation of Layer Based Thermal Behavior in Fused Deposition Modeling Process by Infrared Thermography,” Procedia Manuf., vol. 26, pp. 1014–1022, 2018. XII. A. Patar, N. Jamlus, K. Makhtar, J. Mahmud, and T. Komeda, “Development of dynamic ankle foot orthosis for therapeutic application,” Procedia Eng., vol. 41, no. Iris, pp. 1432–1440, 2012. XIII. Y. A. Jin, H. Li, Y. He, and J. Z. Fu, “Quantitative analysis of surface profile in fused deposition modelling,” Addit. Manuf., vol. 8, pp. 142–148, 2015. XIV. M. Walbran, K. Turner, and A. J. McDaid, “Customized 3D printed ankle-foot orthosis with adaptable carbon fibre composite spring joint,” Cogent Eng., vol. 3, no. 1, pp. 1–11, 2016. XV. N. Wierzbicka, F. Górski, R. Wichniarek, and W. Kuczko, “The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties,” Adv. Sci. Technol. Res. J., vol. 11, no. 3, pp. 283–288, 2017. XVI. S. Farah, D. G. Anderson, and R. Langer, “Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review,” Adv. Drug Deliv. Rev., vol. 107, pp. 367–392, 2016. XVII. S. Wojtyła, P. Klama, and T. Baran, “Is 3D printing safe ? Analysis of the thermal treatment of thermoplastics : ABS , PLA , PET , and,” vol. 9624, no. April, 2017. XVIII. G. Cicala et al., “Polylactide / lignin blends,” J. Therm. Anal. Calorim., 2017. XIX. S. Y. Lee, I. A. Kang, G. H. Doh, H. G. Yoon, B. D. Park, and Q. Wu, “Thermal and mechanical properties of wood flour/talc-filled polylactic acid composites: Effect of filler content and coupling treatment,” J. Thermoplast. Compos. Mater., vol. 21, no. 3, pp. 209–223, 2008. XX. Y. Tao, H. Wang, Z. Li, P. Li, and S. Q. Shi, “Development and application ofwood flour-filled polylactic acid composite filament for 3d printing,” Materials (Basel)., vol. 10, no. 4, pp. 1–6, 2017. XXI. D. Lewitus, S. McCarthy, A. Ophir, and S. Kenig, “The effect of nanoclays on the properties of PLLA-modified polymers Part 1: Mechanical and thermal properties,” J. Polym. Environ., vol. 14, no. 2, pp. 171–177, 2006. XXII. H. J. Chung, E. J. Lee, and S. T. Lim, “Comparison in glass transition and enthalpy relaxation between native and gelatinized rice starches,” Carbohydr. Polym., vol. 48, no. 3, pp. 287–298, 2002. View Download Journal Vol – 15 No -7, July 2020 CFD STUDIES OF MIXING BEHAVIOR OF INERT SAND WITH BIOMASS IN FLUIDIZED BED Authors: B.J.M.Rao,K.V.N.S.Rao, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00053 admin July 26, 2020 Abstract: Agriculture deposits, which remains unused and often causes ecological problems, could play an important role as an energy source to meet energy needs in developing countries ‘ rural areas. Moreover, energy levels in these deposits are low and need to be elevated by introducing efficient operative conversion technologies to utilize these residues as fuels. In this context, the utilization of a fluidized bed innovation enables a wide range of non-uniform-sized low-grade fuels to be effectively converted into other forms of energy.This study was undertaken to evaluate the effectiveness of fluidized conversion method for transformation of agricultural by-products such as rice husk, sawdust, and groundnut shells into useful energy. The present investigation was conducted to know the mixing characteristics of sand and fuel have been found by conducting experiments with mixing ratio of rice husk (1:13), saw dust(1:5) and groundnut shells (1:12), the variation of particle movement in the bed and mixing characteristics are analyzed. The impact of sand molecule size on the fluidization speed of two biofuel and sand components is studied and recommended for groundnut shells using a sand molecule of 0.6 mm size and for rice husk, sawdust 0.4 mm sand particle size. Also, establish that the particle size of sand has a significant effect on mingling features in case of sawdust. In the next part of the investigation, the CFD simulations of the fluidized bed are done to investigate the mixing behavior of sand and biomass particles. A set of simulations are conducted by ANSYS FLUENT16; the state of the bed is the same as that of the test. The findings were presented with the volume fraction of sand and biomass particles in the form of contour plots. Keywords: Biomass,sand,mixing behavior,Volume Fraction,CFD model, Refference: I Anil Tekale, Swapna God, Balaji Bedre, Pankaj Vaghela, Ganesh Madake, Suvarna Labade (2017), Energy Production from Biomass: Review, International Journal of Innovative Science and Research Technology, Volume 2, Issue 10, ISSN No: – 2456 – 2165. II Anil Kumar, Nitin Kumar , Prashant Baredar , Ashish Shukla (2015), A review on biomass energy resources, potential, conversion and policy in India, Renewable and Sustainable Energy, Reviews 45-530-539. III Zhenglan Li, ZhenhuaXue (2015), Review of Biomass Energy utilization technology, 3rd International Conference on Material, Mechanical and Manufacturing Engineering. IV Abdeen Mustafa Omer (2011), Biomass energy resources utilisation and waste management, Journal of Agricultural Biotechnology and Sustainable Development Vol. 3(8), pp. 149 -170 V Rijul Dhingra, Abhinav Jain, Abhishek Pandey, and Srishti Mahajan (2014), Assessment of Renewable Energy in India, International Journal of Environmental Science and Development, Vol. 5, No. 5. VI Paulina Drożyner, Wojciech Rejmer, Piotr Starowicz,AndrzejKlasa, Krystyna A. Skibniewska (2013), Biomass as a Renewable Source of Energy, Technical Sciences 16(3), 211–220. VII Souvik Das, Swati Sikdar (2016), A Review on the Non-conventional Energy Sources in Indian Perspective, International Research Journal of Engineering and Technology (IRJET), Volume: 03 Issue: 02. VIII Maninder, Rupinderjit Singh Kathuria, Sonia Grover, Using Agricultural Residues as a Biomass Briquetting: An Alternative Source of Energy, IOSR Journal of Electrical and Electronics Engineering (IOSRJEEE), ISSN: 2278-1676 Volume 1, Issue 5 (July-Aug. 2012), PP 11-15. IX H.B.Goyal, DiptenduldDeal, R.C.Saxena (2006) Bio-fuels from thermochemical conversion of renewable resources: A review, Renewable and Sustainable Energy Reviews, Volume 12, Issue 2Pages 504-517. X Digambar H. Patil, J. K. Shinde(2017) A Review Paper on Study of Bubbling Fluidized Bed Gasifier, International Journal for Innovative Research in Science & Technology, Volume 4, Issue 4 XI Neil T.M. Duffy, John A. Eaton (2013) Investigation of factors affecting channelling in fixed-bed solid fuel combustion using CFD, Combustion and Flame 160, 2204–2220. XII Xing Wu, Kai Li, Feiyue and Xifeng Zhu (2017), Fluidization Behavior of Biomass Particles and its Improvement in a Cold Visualized Fluidized, Bio Resources 12(2), 3546-3559. XIII N.G. Deen, M. Van Sint Annaland, M.A. Van der Hoef, J.A.M. Kuipers (2007), Reviewof discrete particle modeling of fluidized beds, Chemical Engineering Science 62, 28 – 44. XIV BaskaraSethupathySubbaiah, Deepak Kumar Murugan, Dinesh Babu Deenadayalan, Dhamodharan.M.I (2014), Gasification of Biomass Using Fluidized Bed, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 2. XV Priyanka Kaushal, Tobias Pröll and Hermann Hofbauer, Modelling and simulation of the biomass fired dual fluidized bed gasifier at Guessing/Austria. XVI Dawit DiribaGuta (2012), Assessment of Biomass Fuel Resource Potential and Utilization in Ethiopia: Sourcing Strategies for Renewable Energies, International Journal of Renewable Energy Research, Vol.2, and No.1. View Download Journal Vol – 15 No -7, July 2020 AN APPROACH FOR OPTIMISING THE FLOW RATE CONDITIONS OF A DIVERGENT NOZZLE UNDER DIFFERENT ANGULAR CONDITIONS Authors: Lam Ratna Raju ,Ch. Pavan Satyanarayana,Neelamsetty Vijaya Kavya, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00054 admin July 26, 2020 Abstract: A spout is a device which is used to offer the guidance to the gases leaving the burning chamber. Spout is a chamber which has a capability to change over the thermo-compound essentials created within the ignition chamber into lively vitality. The spout adjustments over the low speed, excessive weight, excessive temperature fuel in the consuming chamber into rapid gasoline of decrease weight and low temperature. An exciting spout is used if the spout weight volume is superior vehicles in supersonic airplane machines commonly combine a few sort of a distinctive spout. Our exam is surpassed on the use of programming like Ansys Workbench for arranging of the spout and Fluent 15.0 for separating the streams inside the spout. The events of staggers for the pipe formed spouts have been seen close by trade parameters for numerous considered one of a kind edges. The parameters underneath recognition are differentiated and that of shape spout for singular terrific edges by using keeping up the gulf, outlet and throat width and lengths of joined together and diverse quantities as same. The simultaneous component and throat expansiveness are kept regular over the cases.The surprise of stun became envisioned and the effects exhibited near closeness in direction of motion of Mach circle and its appearance plans as exposed in numerous preliminary considers on advancement in pipe molded particular spouts with assorted edges four°,7°, 10°, Occurrence of stun is seen with higher special factors Keywords: Nozzle,Supersonic Rocket Engine,Divergent edges, Refference: I. Varun, R.; Sundararajan,T.; Usha,R.; Srinivasan,ok.; Interaction among particle-laden under increased twin supersonic jets, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 2010 224: 1005. II. Pandey,K.M.; Singh, A.P.; CFD Analysis of Conical Nozzle for Mach 3 at Various Angles of Divergence with Fluent Software, International Journal of Chemical Engineering and Applications, Vol. 1, No. 2, August 2010, ISSN: 2010-0221. III. Natta, Pardhasaradhi.; Kumar, V.Ranjith.; Rao, Dr. Y.V. Hanumantha.; Flow Analysis of Rocket Nozzle Using Computational Fluid Dynamics (Cfd), International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622,Vol. 2, Issue five, September- October 2012, pp.1226-1235. IV. K.M. Pandey, Member IACSIT and A.P. Singh. K.M.Pandey, Member, IACSIT and S.K.YadavK.M.Pandey and S.K.Yadav, ―CFD Analysis of a Rocket Nozzle with Two Inlets at Mach2.1, Journal of Environmental Research and Development, Vol 5, No 2, 2010, pp- 308-321. V. Shigeru Aso, ArifNur Hakim, Shingo Miyamoto, Kei Inoue and Yasuhiro Tani “ Fundamental examine of supersonic combustion in natural air waft with use of surprise tunnel” Department of Aeronautics and Astronautics, Kyushu University, Japan , Acta Astronautica 57 (2005) 384 – 389. VI. P. Padmanathan, Dr. S. Vaidyanathan, Computational Analysis of Shockwave in Convergent Divergent Nozzle, International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622 , Vol. 2, Issue 2,Mar-Apr 2012, pp.1597-1605. VII. Adamson, T.C., Jr., and Nicholls., J.A., “On the shape of jets from Highly below improved Nozzles into Still Air,” Journal of the Aerospace Sciences, Vol.26, No.1, Jan 1959, pp. Sixteen-24. VIII. Lewis, C. H., Jr., and Carlson, D. J., “Normal Shock Location in underneath increased Gas and Gas particle Jets,” AIAA Journal, Vol 2, No.4, April 1964, pp. 776-777. Books IX. Anderson, John D.Jr.; Modern Compressible Flow with Historical Perspective, Third edition, 2012 X. Versteeg. H.; Malalasekra.W.; An Introduction to Computational Fluid Dynamics The Finite Volume Method, Second Edition,2009. XI. H.K.Versteeg and W.Malala Sekhara, “An introduction to Computational fluid Dynamics”, British Library cataloguing pub, 4th version, 1996. XII. Lars Davidson, “An introduction to turbulenceModels”, Department of thermo and fluid dynamics, Chalmers college of era, Goteborg, Sweden, November, 2003. XIII. Karna s. Patel, “CFD analysis of an aerofoil”, International Journal of engineering studies,2009. XIV. K.M. Pandey, Member IACSIT and A.P. Singh “CFD Analysis of Conical Nozzle for Mach 3 at Various Angles of Divergence with Fluent Software,2017. XV. P. Parthiban, M. Robert Sagayadoss, T. Ambikapathi, Design And Analysis Of Rocket Engine Nozzle by way of the usage of CFD and Optimization of Nozzle parameters, International Journal of Engineering Research, Vol.Three., Issue.5., 2015 (Sept.-Oct.). View Download Journal Vol – 15 No -7, July 2020 DESIGN OPTIMIZATION OF DRIVE SHAFT FOR AN AUTOMOBILE APPLICATIONS Authors: Govindarajulu Eedara,P. N. Manthru Naik, DOI NO: https://doi.org/10.26782/jmcms.2020.07.00055 admin July 26, 2020 Abstract: The driveshaft is a mechanical instrument that is used in automobiles. The other name of the drive shaft is driveshaft is prop shaft. It has one long cylindrical structure consist of two universal joints. By using the driveshaft it transfers the rotary motion to the differential by using the helical gearbox. By using this rotary motion the rare wheels will run. The 3dimensional Model of automobile drive Shaft is designed using CATIA parametric which enables product development processes and thereby brings about an optimum design. Now a day’s steel is using the best material for the driveshaft.In this paper replacing the composite materials (Kevlar, e-glass epoxy) instead of steel material and itreduces a considerable amount of weight when compared to the conventional steel shaft. The composite driveshaft have high modulus is designed by using CATIA software and tested in ANSYS for optimization of design or material check and providing the best datebook Keywords: The driveshaft ,CATIA,automobile,steel,composite materials,ANSYS,Kevla,e-glass epoxy, Refference: I A.R. Abu Talib, Aidy Ali, Mohamed A. Badie, Nur Azienda Che Lah, A.F. Golestaneh Developing a hybrid, carbon/glass-fiber-reinforced, epoxy composite automotive driveshaft, Material and Design, volume31, 2010, pp 514 – 521 II ErcanSevkat, Hikmet Tumer, Residual torsional properties of composite shafts subjected to impact Loadings, Materials, and design, volume – 51, 2013, pp -956-967. III H. Bayrakceken, S. Tasgetiren, I. Yavuz two cases of failure in the power transmission system on vehicles: A Universal joint yoke and a drive shaft, volume-14,2007,pp71. IV H.B.H. Gubran, Dynamics of hybrid shafts, Mechanics Research communication, volume – 32, 2005, pp – 368-374. V Shaw D, Simitses DJ, SheinmanI. Imperfection sensitivity of laminated cylindrical shells in torsion and axial compression. ComposStruct 1985; 4(3) pp:35–60. View Download Journal Vol – 15 No -7, July 2020 EXPERIMENTAL EVALUATION OF AN SI ENGINE USING E10 EQUIVALENT TERNARY GASOLINE- ALCOHOL BLENDS". JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES 15, n.º 7 (26 de julho de 2020). http://dx.doi.org/10.26782/jmcms.2020.07.00056.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Teses / dissertações sobre o assunto "Xi feng jiu chang"

1

Chow, Wai-chun. "On the relationship between the prose and comics of Feng Zikai Feng Zikai san wen yu man hua chuang zuo guan xi yan jiu /". Click to view the E-thesis via HKUTO, 2008. http://sunzi.lib.hku.hk/hkuto/record/B40717380.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Cheng, Xiaoke. "Shang shi gong si ying yu zhi liang fen xi yu ping jia yan jiu ji yu Zhongguo zi ben shi chang huan jing de yan jiu gou jia yu jing yan zheng ju /". Dalian Shi : Dongbei cai jing da xue chu ban she, 2006.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Su, Wenhua. "Zhen jiu zhi liao san cha shen jing tong lin chuang de xi tong fen xi /". click here to view the abstract and table of contents, 2006. http://net3.hkbu.edu.hk/~libres/cgi-bin/thesisab.pl?pdf=b2000932xa.pdf.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Sung, Ka-yee Rosa. "On the prosodic and thematic properties of post-completion constituents in focus-first constructions in Cantonese Yue yu jiao dian xian xing ju ju mo hou cheng fen yun lü ji xin xi jie gou te zheng yan jiu /". Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/hkuto/record/B39848917.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Ke, Michael Bing-Huang. "The marital relationship of Chinese urban Christian intellectuals exploratory analysis and program recommendations = Ni nong wo nong : Zhongguo cheng shi jidu tu zhi shi fen zi hun yin guan xi de tan tao yu dui ce /". Theological Research Exchange Network (TREN) Theological Research Exchange Network (TREN) Access this title online, 2006. http://www.tren.com.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

CHUNG, SHAO-CHEN, e 鍾韶真. "Ming Tulong Ji Feng Yi Ge Yue Fu Pai Chang YiShu Yan Jiu". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/d2jtf5.

Texto completo da fonte
Resumo:
碩士
東吳大學
中國文學系
103
Tulong (1543-1606), once had another name Changqing, Wei-Zhen , and Chi-Shui. Who was bone in Ningbo Yinxian。He was a famous writer and drmatist. This research which range was all Tulong’s life, his friends about drama and his works " feng- yi-ge-yue-fu". This research used Geographic Information System（GIS）and pai-chang theory, to discuss Tulong’s influence about drama in late ming dynasty. The first chapter discussed all Tulong’s life, and background which about late ming dynasty. The first chapter referenced Xu Shuo Fang’s "Wan Ming Qu Jia Nian Pu" and Wang Chao Hong’s "Ming Qing Zhe Ji Qu Jia Kao" to study period, location, dating events, friends, and works……exc fourteen project. Tulong’s life had tow very important things which is “zhong ju ren guan” and “ba guan gui xiang”. These Thing divided all Tulong’s life into three parts. This chapter will draw painting to discuss.At last it will research the location which about Tulong’s drama and fridnds to discuss Tulong’s influences in drama. The second chapter is about Tulong’s script . Tulong creared three scripts which is “tan hua ji”, “cai hao ji ”and “xiu wen ji”. Three scripts was named “ feng- yi-ge-yue-fu”. This chaper introduced story what time was creared about three scripts, theme, and version. This chapter introduced plot, architecture and character image in three scripts at last. The third chapter is about “tan hua ji” pai chang artistic research. It introduced pai chang theory in the first. The theory was according to luo li rong “Qu Xue Gai Yao”. This theory is on the basis of this research. This chapter arranged character in each parts, and discussed form , characteristic, and pai chang leng re whichis according to pai chang theory. This chapter analysised character ‘s work and reset by character appearances and songs. This chapter is to discuss “tan hua ji” achievements in drama. The fourth chapter is about “cai hao ji ” pai chang art. It discussed pai chang leng re by counting character’s appearance, form and characteristic in each parts. It discussed analysised character ‘s work and reset by character appearances and songs. The fifth chapter is about “cai hao ji ” pai chang art. It discussed pai chang leng re by counting character’s appearance, form and characteristic in each parts. It discussed analysised character ‘s work and reset by character appearances and songs. Conclusion part summarizes the TuLong and location. It discussed all Tulong’s life has been to place, and friends about drama, and influences in drama. It discussed “Qu Xue Gai Yao” pai chang achienement in drama.
Estilos ABNT, Harvard, Vancouver, APA, etc.

Livros sobre o assunto "Xi feng jiu chang"

1

"Xi feng jiu chang zhi " bian zuan ban gong shi. 西凤酒厂志, 1956-1989: Chu gao. Fengxiang Xian: Xi feng jiu chang, 1990.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

man, Cha pu. R yu yan shi chang yan jiu fen xi =: R for marketing research and analytics. Beijing: Ji xie gong ye chu ban she, 2016.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Heping, Yao, ed. Shuo xi jiang cha chang men ge: Jiang nan jiu shi li de xiao min feng liu. Shenyang Shi: Liaoning jiao yu chu ban she, 2011.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Lifen, Chen, ed. Zhongguo nong chan pin chu kou shi chang xi fen yan jiu. Beijing Shi: Zhongguo nong ye da xue chu ban she, 2009.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

author, Ding Yizhuang 1948, e Ruan Danqing author, eds. Feng xi zhong de gai ge: Huang Zonghan yu Beijing dong feng dian shi ji chang de po bing zhi lü. Beijing: Sheng huo, du shu, xin zhi san lian shu dian, 2014.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Hong, Wenqing. Da feng qi xi: Minguo chu nian zhi shi fen zi wen hua jiu guo = Culture & change : scholars in modern China. Taibei Shi: Cai tuan fa ren He Chuangshi shu fa yi shu wen jiao ji jin hui, 2012.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Zhenqian, Hua, ed. Ji yu xin xi xi tong de xian sun si fen guan li chang tai ji zhi yan jiu yu ying yong. Beijing: Ke xue chu ban she, 2011.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Houming, Chen, ed. Taiwan zhong yao wai xiao shang pin zhi guo ji shi chang fen xi yu ce lue yan jiu. Taibei Shi: Cai tuan fa ren Zhonghua jing ji yan jiu yuan, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Qinghe, Su, e Liao Qingtang, eds. Taiwan di qu guo ji gang fu jin hai yu hai qi xiang xian chang diao cha fen xi yan jiu (1/4). Taibei Shi: Jiao tong bu yun shu yan jiu suo, 2002.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Eugene, Wetzstein Michael, ed. Meiguo sheng wu ran liao shi chang jing ji fen xi yan jiu: Economic analysis of U. S. biofuel market. Hangzhou Shi: Zhejiang da xue chu ban she, 2010.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Xi feng jiu chang":
Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia