Literatura científica selecionada sobre o tema ""wall-Tube" electrode"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema ""wall-Tube" electrode".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto ""wall-Tube" electrode"
CHENG, Lingyun, Nianwen XIANG, Kejie LI, Weijiang CHEN, Kai BIAN, Jin YANG, Zongqi XU, Congying HAN, Hongyang GU e Chun YANG. "Reliability improvement of gas discharge tube by suppressing the formation of short-circuit pathways". Plasma Science and Technology 24, n.º 3 (1 de março de 2022): 035501. http://dx.doi.org/10.1088/2058-6272/ac479c.
Texto completo da fonteDEHGHANI, SAJJAD, MOHAMMAD KAZEM MORAVVEJ-FARSHI e MOHAMMAD HOSSEIN SHEIKHI. "TEMPERATURE DEPENDENCE OF ELECTRICAL RESISTANCE OF INDIVIDUAL CARBON NANOTUBES AND CARBON NANOTUBES NETWORK". Modern Physics Letters B 26, n.º 21 (16 de julho de 2012): 1250136. http://dx.doi.org/10.1142/s0217984912501369.
Texto completo da fonteStein, Jennifer A., e Alanah Fitch. "Dual wall-tube electrode cell for use in clay-modified electrode studies". Electroanalysis 6, n.º 1 (janeiro de 1994): 23–28. http://dx.doi.org/10.1002/elan.1140060106.
Texto completo da fonteBirhane, Y. T., S. C. Lin e F. C. Lai. "Effect of Electrode Length on the Performance of EHD Gas Pump". Applied Mechanics and Materials 598 (julho de 2014): 355–60. http://dx.doi.org/10.4028/www.scientific.net/amm.598.355.
Texto completo da fonteLi, Mao Dong, Xue Ying Tang, Yu Hui Du, Juan Liu, Jun Ming Zhao e Zhi Ping Zhu. "Electrochemical Property Study of Water-Wall Tube 20G in SO42- Medium at Room Temperature". Advanced Materials Research 676 (março de 2013): 31–34. http://dx.doi.org/10.4028/www.scientific.net/amr.676.31.
Texto completo da fonteYao, Fu, Duan Xiao-Long, Xing Ming-Ming, Luo Xi-Xian, Zhang Ying-Hui e Liu Wang. "Study on Fabrication and UV Photoelectric Property of TiO2 Nanotube Array Electrodes". Journal of Nanoscience and Nanotechnology 16, n.º 4 (1 de abril de 2016): 3945–50. http://dx.doi.org/10.1166/jnn.2016.11830.
Texto completo da fonteKapauan, Amando F. "A wall-tube electrode cell for computerized potentiometric stripping analysis". Analytical Chemistry 60, n.º 19 (outubro de 1988): 2161–62. http://dx.doi.org/10.1021/ac00170a037.
Texto completo da fonteYABUTANI, TOMOKI, YOSHIO SHODA, YUJI TANI, YOHEI YAMADA e JUNKO MOTONAKA. "DIRECT OXIDATION OF TRYPTOPHAN ON MULTI-WALL CARBON NANOTUBES MODIFIED CARBON ELECTRODE AND ITS APPLICATION TO FUEL CELL". International Journal of Modern Physics: Conference Series 06 (janeiro de 2012): 115–20. http://dx.doi.org/10.1142/s2010194512003030.
Texto completo da fonteRees, Neil V., Oleksiy V. Klymenko, Barry A. Coles e Richard G. Compton. "Fast scan linear sweep voltammetry at a high-speed wall-tube electrode". Journal of Electroanalytical Chemistry 557 (outubro de 2003): 99–107. http://dx.doi.org/10.1016/s0022-0728(03)00352-8.
Texto completo da fonteGao, Jun, Hao Chen, Tianlong Li, Xin Qiao, Xinai Guo e Shida Shi. "Leakage of water-cooled wall tube in subcritical boiler". Journal of Physics: Conference Series 2760, n.º 1 (1 de maio de 2024): 012052. http://dx.doi.org/10.1088/1742-6596/2760/1/012052.
Texto completo da fonteTeses / dissertações sobre o assunto ""wall-Tube" electrode"
Hadj, Ahmed Asmaa. "Design of new electrochemical cells for studying enzymes by protein film electrochemistry". Electronic Thesis or Diss., Aix-Marseille, 2022. http://www.theses.fr/2022AIXM0100.
Texto completo da fonteProtein Film Electrochemistry (PFE) is a technique in which an enzyme is adsorbed at an electrode and its catalytic turnover rate is measured as an electrical current which allows the investigation of enzyme’s kinetics as a function of different experimental parameters. However, this technique requires fast transport of the substrate towards the electrode. In a previous study, our team proposed a new design based on the wall-tube electrode that provides better transport than the rotating disc electrode, which is commonly used in PFE methods. In this thesis, we explored, using CFD, the effect of the various parameters of the design and proposed semi-empirical formulas to predict the mass transport coefficient and shear stress at the electrode. We used a 3D-printed cell to validate experimentally our predictions. Moreover, we designed and built a new type of wall-tube electrodes with integrated mixers that should allow faster changes of substrate and inhibitor’s concentrations
Capítulos de livros sobre o assunto ""wall-Tube" electrode"
Han, Junling, Guannan Ren, Limei Peng, Hongyu Tian e Pengbo Ji. "Analysis and Qualification Control of Welding Defects of Coated 15-15Ti Cladding Tube". In Springer Proceedings in Physics, 861–71. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_73.
Texto completo da fonteXu, Hui, Lulu Fang, Qiaofeng Ding, Yanjun Guo, Xiaohui Li, Lu Wang e Lin Yang. "Investigation on the Micromechanisms of the Cracking of 316L Heat Exchanger Tubes". In Advances in Transdisciplinary Engineering. IOS Press, 2021. http://dx.doi.org/10.3233/atde210283.
Texto completo da fonteBrandt, Siegmund. "The Discovery of the Electron (1897)". In The Harvest of a Century, 16–19. Oxford University PressOxford, 1992. http://dx.doi.org/10.1093/oso/9780199544691.003.0005.
Texto completo da fonteLawton, B., e G. Klingenberg. "Application To Very High Pressure Environments". In Transient Temperature in Engineering and Science, 442–504. Oxford University PressOxford, 1996. http://dx.doi.org/10.1093/oso/9780198562603.003.0009.
Texto completo da fonteTrabalhos de conferências sobre o assunto ""wall-Tube" electrode"
Bondarenko, Gennady G., Maxim R. Fisher e Vladimir I. Kristya. "Simulation of electrode material deposition at the tube wall of a high-pressure mercury arc discharge lamp". In 2008 IEEE 35th International Conference on Plasma Science (ICOPS). IEEE, 2008. http://dx.doi.org/10.1109/plasma.2008.4590916.
Texto completo da fonteOh, Si-Doek, e Ho-Young Kwak. "A Study of Bubble Behavior and Boiling Heat Transfer Enhancement Under Electric Field". In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0761.
Texto completo da fonteLei, Hong, e Xiaobo Tan. "A Novel Tubular Thin-Wall IPMC Sensor Capable of Two-Dimensional Sensing: Fabrication, Characterization and Modeling". In ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/smasis2014-7594.
Texto completo da fonteSadek, H., J. Cotton e C. Y. Ching. "Horizontal Tube Side Convective Condensation Under an Applied DC Voltage". In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22158.
Texto completo da fonteBurman, Debashish, Terrence W. Simon, Uwe Kortshagen e Douglas Ernie. "Separation Control Using Plasma Actuators: Steady Flow in Low Pressure Turbines". In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-46807.
Texto completo da fonteCaruntu, Dumitru I., e Ezequiel Juarez. "Voltage Response of Primary Resonance of Coaxial Vibrations of Electrostatically Actuated DWCNT". In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-66220.
Texto completo da fonteKondo, Koichi, Kenji Yoshida, Tadayoshi Matsumoto, Tomio Okawa e Isao Kataoka. "Flow Patterns of Gas-Liquid Two-Phase Flow in Round Tube With Sudden Expansion". In 10th International Conference on Nuclear Engineering. ASMEDC, 2002. http://dx.doi.org/10.1115/icone10-22154.
Texto completo da fonteLu, Y. C., G. Goszczynski e S. Ramamurthy. "Degradation of Alloy 800 Under Steam Generator Secondary Side Crevice Conditions". In 17th International Conference on Nuclear Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/icone17-75695.
Texto completo da fonteYoshida, Kenji, Hidenobu Tanaka, Keizo Matsuura e Isao Kataoka. "Studies on Gas-Phase Turbulence Modification in Vertical Upward Annular Flow". In ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45375.
Texto completo da fonteNaito, J., M. Shikida, M. Hirota, Z. Y. Tan e K. Sato. "Miniaturization of on-wall in-tube flexible thermal flow sensor using heat shrinkable tube". In 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems. IEEE, 2008. http://dx.doi.org/10.1109/memsys.2008.4443808.
Texto completo da fonte