Conecte-se

Bibliografias temáticas / Vibrating intrinsic reverberation chamber / Artigos de revistas

Siga este link para ver outros tipos de publicações sobre o tema: Vibrating intrinsic reverberation chamber.

Artigos de revistas sobre o tema "Vibrating intrinsic reverberation chamber"

Autor: Grafiati

Publicado: 1 de fevereiro de 2025

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 16 melhores artigos de revistas para estudos sobre o assunto "Vibrating intrinsic reverberation chamber".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Kouveliotis, N. K., P. T. Trakadas e C. N. Capsalis. "FDTD Modeling of a Vibrating Intrinsic Reverberation Chamber". Progress In Electromagnetics Research 39 (2003): 47–59. http://dx.doi.org/10.2528/pier02050804.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Serra, Ramiro, e Andres Rodriguez. "Vibrating Intrinsic Reverberation Chamber for Electromagnetic Compatibility Measurements". IEEE Latin America Transactions 11, n.º 1 (fevereiro de 2013): 389–95. http://dx.doi.org/10.1109/tla.2013.6502835.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Kouveliotis, N. K., P. T. Trakadas e C. N. Capsalis. "FDTD MODELING OF A VIBRATING INTRINSIC REVERBERATION CHAMBER - Abstract". Journal of Electromagnetic Waves and Applications 17, n.º 6 (janeiro de 2003): 849–50. http://dx.doi.org/10.1163/156939303322503394.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Kouveliotis, N. K., P. T. Trakadas e C. N. Capsalis. "FDTD calculation of quality factor of vibrating intrinsic reverberation chamber". Electronics Letters 38, n.º 16 (2002): 861. http://dx.doi.org/10.1049/el:20020576.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Cheng, Erwei, Pingping Wang, Qian Xu, Cui Meng e Rui Jia. "Design and Measurement of a Vibrating Intrinsic Reverberation Chamber Working in Tuned Mode". International Journal of Antennas and Propagation 2023 (16 de janeiro de 2023): 1–6. http://dx.doi.org/10.1155/2023/3466400.

Texto completo da fonte

Resumo:

In this letter, a vibrating intrinsic reverberation chamber (VIRC) working in mode tuning is designed and fabricated; the designed RC is made of a highly electrically conductive silver fabric. A stepper motor is used to tune the cavity surface step by step along its normal direction, and an RC with vibrating wall is realized. The corresponding relationship between the vibrating amplitude and frequency of use is calculated. A test system is developed and the performance of VIRC is experimentally verified. Measurement results show that the measured E-field samples follow a Rician distribution, and the standard deviation of the space E-field is less than 3 dB, which meets the requirements of statistical uniformity tolerance in IEC 61000-4-21.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Kouveliotis, N. K., P. T. Trakadas, I. I. Hairetakis e C. N. Capsalis. "Experimental investigation of the field conditions in a vibrating intrinsic reverberation chamber". Microwave and Optical Technology Letters 40, n.º 1 (2003): 35–38. http://dx.doi.org/10.1002/mop.11279.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Kouveliotis, N. K., P. T. Trakadas e C. N. Capsalis. "Examination of field uniformity in vibrating intrinsic reverberation chamber using the FDTD method". Electronics Letters 38, n.º 3 (2002): 109. http://dx.doi.org/10.1049/el:20020076.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Andrieu, Guillaume, Narjes Meddeb, Charles Jullien e Nicolas Ticaud. "Complete Framework for Frequency and Time-Domain Performance Assessment of Vibrating Intrinsic Reverberation Chambers". IEEE Transactions on Electromagnetic Compatibility 62, n.º 5 (outubro de 2020): 1911–20. http://dx.doi.org/10.1109/temc.2020.2966741.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Zhao, Huapeng, e Zhongxiang Shen. "MODAL-EXPANSION ANALYSIS OF A MONOPOLE IN VIBRATING REVERBERATION CHAMBER". Progress In Electromagnetics Research 85 (2008): 303–22. http://dx.doi.org/10.2528/pier08090209.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Kouveliotis, N. K., P. T. Trakadas e C. N. Capsalis. "Theoretical investigation of the field conditions in a vibrating reverberation chamber with an unstirred component". IEEE Transactions on Electromagnetic Compatibility 45, n.º 1 (fevereiro de 2003): 77–81. http://dx.doi.org/10.1109/temc.2002.808072.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Koukounian, Viken N., e Chris K. Mechefske. "Commissioning of an Atypical Acoustic Facility for Experimental Testing". Journal of the IEST 59, n.º 1 (1 de janeiro de 2016): 22–39. http://dx.doi.org/10.17764/1098-4321.59.1.22.

Texto completo da fonte

Resumo:

Abstract Computational modeling (BEM, FEM, and SEA) is often implemented at different stages of the design process to optimize manufacturing and performance parameters. Computational results are typically verified experimentally. Experimental testing standards, particularly those related to vibro-acoustic testing, are defined by various agencies such as ASTM, ANSI, and ISO. An investigation proposing a new computational methodology of analyzing the vibro-acoustic behavior of an aircraft fuselage due to the turbulent boundary layer required verification of the predictions experimentally. In the face of certain limitations, an atypical acoustic facility was constructed challenging conventional standards while complying with the defined criteria of international testing standards. Principal deviations relate to the geometric requirements that recommend large volumes of certain construct, and microphone and acoustic source positioning. The calculated 95% confidence intervals compared exceptionally well against defined criteria (strictest measure is 1 for frequencies greater than 315 Hz) by averaging less than 0.4 for each test product across a frequency range that exceeded is the range specified by ASTM E90. The requirements for qualification of the reverberation chamber according to ANSI S12.51 were also satisfied, with the exception of measurements at 125 Hz and 160 Hz that observed heightened sensitivity due to near field effects and room modes. The calculated permissible ratio of decay variation showed good agreement against ASTM C423 criteria despite the intrinsic challenge of creating a diffuse and reverberant field in a confined, or constricting, volume. The last compliance measure reviewed flanking to ensure acceptable signal-to-noise ratio. It was clearly demonstrated that the silenced sound pressure levels (with the presence of the specimen) were greater than 10 dB above the background sound pressure levels (with the consequences of flanking considered). The investigation confirmed the feasibility of using an atypical acoustic facility to comply with various international testing standards. The noted deviations and shortcomings are not specific to the presented work, but are common challenges that all facilities observe.

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Hara, Makoto, Jianqing Wang e Frank Leferink. "Effect of Wall Shaking Amplitude on Vibrating Intrinsic Reverberation Chamber Characteristics". IEEE Transactions on Electromagnetic Compatibility, 2023, 1–8. http://dx.doi.org/10.1109/temc.2023.3331056.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Rammal, Youssef, Guillaume Andrieu, Nicolas Ticaud, Nicolas Roger, Alexandre Laisné e Philippe Pouliguen. "Stirring Process Optimization of a Vibrating Intrinsic Reverberation Chamber Using Scattering Parameter Measurements". IEEE Transactions on Electromagnetic Compatibility, 2023, 1–8. http://dx.doi.org/10.1109/temc.2023.3331898.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Mahiddini, Florian, Guillaume Andrieu, Nicolas Bui e Christophe Guiffaut. "Simulation of Vibrating Intrinsic Reverberation Chambers Using an FDTD Conformal Mesh". IEEE Transactions on Electromagnetic Compatibility, 2023, 1–8. http://dx.doi.org/10.1109/temc.2023.3259241.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

HARA, Makoto, Jianqing WANG e Frank LEFERINK. "Numerical Derivation of Design Guidelines for Tightness and Shaking Amplitude of Vibrating Intrinsic Reverberation Chamber by Method of Moment". IEICE Transactions on Communications, 2023. http://dx.doi.org/10.1587/transcom.2023ebp3002.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Schipper, Hans, e Frank Leferink. "Degradation of Dynamic Range for Shielding Effectiveness Measurements Due to Long-Term Use of a Dual Vibrating Intrinsic Reverberation Chamber". IEEE Transactions on Electromagnetic Compatibility, 2022, 1–7. http://dx.doi.org/10.1109/temc.2022.3202352.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!