Siga este link para ver outros tipos de publicações sobre o tema: Ttes.
Teses / dissertações sobre o tema "Ttes"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores trabalhos (teses / dissertações) para estudos sobre o assunto "Ttes".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja as teses / dissertações das mais diversas áreas científicas e compile uma bibliografia correta.
1
Ferré, Alexis. "Etude CFD et expérimentale d'un stockage thermique de type thermocline". Electronic Thesis or Diss., Pau, 2024. http://www.theses.fr/2024PAUU3023.
Texto completo da fonteResumo:
Le stockage d'énergie est essentiel à la transition énergétique car il permet de découpler la production de l'énergie de sa consommation. Le stockage de chaleur thermocline en eau, utilisé dans les réseaux de chaleur à moyenne ou basse température, repose sur la stratification thermique dans une cuve. Les performances de ce type de stockage sont fortement liées à la bonne stratification du fluide qui peut être perturbée par l'injection et le soutirage du liquide, des aspects peu explorés dans la littérature.L'objectif de cette thèse est de modéliser un tel stockage de manière fiable pour analyser la distribution du fluide. En effet, le but est de mieux appréhender les phénomènes physiques gouvernant la thermocline pendant les cycles de fonctionnement et d'accroître ses performances énergétiques par un design ou un pilotage amélioré. Pour ce faire, des études numériques utilisant la CFD (Computational Fluid Dynamics) ont été réalisées et comparées à des données expérimentales disponibles dans la littérature et obtenues via une nouvelle section d'essais.Dans un premier temps, un modèle CFD a été développé basé sur un cas expérimental existant de la littérature. Dans un stockage thermocline en eau, il y a bien souvent coexistence entre une région laminaire dans la cuve et turbulente à proximité des distributeurs. Cette coexistence est un enjeu majeur de la modélisation car la plupart des modèles de turbulence ne sont pas capables de représenter fiablement la transition d'un écoulement turbulent vers laminaire. Pour ces travaux, une méthode statistique RANS (Reynolds Average Numerical Simulation) est adoptée et le modèle k-omega-SST est sélectionnée car il permet de représenter les écoulements en proche paroi. Concernant la flottabilité, il existe deux méthodes pour considérer ses effets : utiliser une masse volumique variable dans l'ensemble des équations, ou constante sauf dans le terme de flottabilité . Cette dernière est connue sous le nom de l'approximation de Boussinesq mais n'est valable que sur une faible gamme de ΔT. La précision de l'approximation de Boussinesq a été remise en question et une approche au second ordre de ce modèle est employée. Celle-ci permet d'obtenir le même terme de flottabilité qu'un modèle à masse volumique variable mais avec un temps de calcul réduit de moitié. La comparaison avec des données expérimentales a permis de souligner l'impact de l'état initial en température (stockage stratifié ou homogène). Une étude exploratoire de l'impact d'une injection progressive selon une rampe en débit a montré son impact sur la réduction de l'épaisseur de la thermocline au moment de sa création.Dans une démarche de validation du modèle et de vérification des observations numériques, un nouveau dispositif expérimental a été conçu. Celui-ci mesure la température grâce à 300 thermocouples disposés dans la cuve et permet un contrôle précis des conditions opératoires. Des études en phase statiques pour évaluer les pertes thermiques ont été réalisées. Des études dynamiques ont permis de faire varier les paramètres opératoires pertinents : la vitesse de propagation axiale, l'écart de température, le dispositif de soutirage ou encore l'injection progressive. Pour ce système, les résultats montrent qu'il est possible d'obtenir une stratification à forte vitesse (> 2 mm/s) tant que le ΔT est suffisamment élevé.Enfin, l'écoulement dans la section d'essais a été étudié numériquement avec un modèle CFD actualisé. Les champs de variables ont montré que les résultats numériques et expérimentaux sont cohérents, en particulier lors de la formation de la thermocline. Toutefois, un excès de diffusion lors de la propagation du gradient thermique à faible débit est notable. Pour tous les essais réalisés les écarts expérimentaux et numériques ont été quantifiés: à l'exception des conditions critiques, l'écart sur l'épaisseur de thermocline est de ±50% et se situe entre 0 et -10% pour le taux de restitutionEnergy storage is essential to the energy transition as it allows decoupling energy production from its consumption. Water-based thermocline heat storage, used in medium or low-temperature heating networks, relies on thermal stratification in a tank. The performance of this type of storage is strongly linked to the proper stratification of the fluid, which can be disrupted by the injection and extraction of the liquid, aspects that are scarcely explored in the literature.The objective of this thesis is to reliably model such storage to analyze the fluid distribution. The aim is to better understand the physical phenomena governing the thermocline during operating cycles and to enhance its energy performance through improved design or control. To achieve this, numerical studies using CFD (Computational Fluid Dynamics) were conducted and compared with experimental data available in the literature and obtained via a new experimental setup.Initially, a CFD model was developed based on an existing experimental case from the literature. In water thermocline storage, there is often coexistence between a laminar region in the tank and a turbulent region near the distributors. This coexistence is a major challenge in modeling because most turbulence models cannot reliably represent the transition from turbulent to laminar flow. For this work, a RANS (Reynolds Average Numerical Simulation) statistical method is adopted, and the k-omega-SST model is selected as it can represent near-wall flows. Regarding buoyancy, there are two methods to consider its effects: using a variable density in all equations or a constant density except in the buoyancy term. The latter is known as the Boussinesq approximation but is only valid over a narrow range of ΔT. The accuracy of the Boussinesq approximation has been questioned, and a second-order approach of this model is employed. This allows obtaining the same buoyancy term as a variable density model but with a calculation time reduced by half. Comparison with experimental data highlighted the impact of the initial temperature state (stratified or homogeneous storage). An exploratory study of the impact of progressive injection according to a flow ramp showed its effect on reducing the thermocline thickness at the time of its creation.As part of the model validation and verification of numerical observations, a new experimental setup was designed. It measures the temperature using 300 thermocouples placed in the tank and allows precise control of operating conditions. Static phase studies to evaluate thermal losses were conducted. Dynamic studies allowed varying relevant operating parameters: axial propagation speed, temperature difference, extraction device, and progressive injection. For this system, the results show that it is possible to obtain stratification at high speed (> 2 mm/s) as long as the ΔT is sufficiently high.Finally, the flow in the test section was numerically studied with an updated CFD model. The variable fields showed that the numerical and experimental results are consistent, especially during the formation of the thermocline. However, excessive diffusion during the propagation of the thermal gradient at low flow is notable. For all the tests carried out, the experimental and numerical discrepancies were quantified: except for critical conditions, the discrepancy in thermocline thickness is ±50% and ranges from 0 to -10% for the restitution rate
2
Fauth, Christiane. "Untersuchung der Anwendungseigenschaften transdermaler therapeutischer Systeme (TTS) und Entwicklung eines TTS mit einstellbarer Okklusivität". [S.l.] : [s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=970628153.
Texto completo da fonte
3
Meurk, Erik, e Simon Sundström. "Könspreferens för instruerande TTS-synteser". Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299337.
Texto completo da fonteResumo:
Text-till-talsynteser (eng. Text-to-speech, TTS), med andra ord digitalt skapade röster, har blivit en naturlig del av våra dagliga liv. Vi hör dem i kollektivtrafiken, när vi interagerar med digitala assistenter och när människor som saknar en egen röst använder dem för att kommunicera. Dessa artificiella röster har, precis som riktiga röster, olika egenskaper som påverkar hur de låter och uppfattas. Det är därför intressant att förstå vilka TTS-synteser som användare föredrar i olika sammanhang. I denna studie undersöktes huruvida det finns en preferens för olika kön hos instruerande TTS-synteser. I studien fick 46 deltagare spela ett spel där målet var att fullfölja ett antal upplästa instruktioner genom olika knapptryck på skärmen. Spelet var uppdelat i två omgångar, där instruktören i ena omgången var en TTS-syntes med en manlig röst och i den andra en kvinnlig. Vilken TTS-syntes som började och ordning av instruktioner slumpades för deltagarna. Efter spelad omgång svarade deltagarna på en enkät om upplevda röstegenskaper hos instruktören. När sista omgången fullföljts besvarades även en avslutande enkät där det bland annat frågades vilken av TTS-synteserna de föredrog, följt av en kvalitativ fråga där de fick motivera sitt svar. Svaren analyserades sedan genom ett statistiskt test och en kvalitativ analys. Studien kunde ej påvisa någon preferens för kön hos instruerande TTS-synteser. Istället visade resultatet att testpersonerna har individuella preferenser och åsikter om rösterna, även om det verkade finnas viss konsensus om somliga upplevda röstegenskaper hos TTS-synteser.Text-to-speech synthesis (TTS), in other words digitally created voices, has become a natural part of our daily lives. We hear them in public transport, when we interact with digital assistants and when people who do not have their own voice use them to communicate. These artificial voices, just like real voices, have different properties that affect how they sound and are perceived. It is thereby interesting to understand which TTS-synthesis users prefer in different contexts. This study examined whether there is a preference for different genders in instructional TTS-synthesis. In the study, 46 participants played a game where the goal was to complete a number of read out loud instructions through various key presses on the screen. The game was divided into two rounds, where the instructor in one round was a TTS-synthesis with a male voice and female in the other one. Which TTS-synthesis started and the order of instructions was randomized for each participant. Upon completing the round, the participants answered a questionnaire about perceived voice characteristics of the instructor. When the final round was completed, a final questionnaire was also answered in which, among other things, it was asked which of the TTS-syntheses the test subjects preferred, followed by a qualitative question in which they were asked to justify their answer. The answers were then analyzed through a statistical test and a qualitative analysis. The study could not demonstrate any gender preference in instructional TTS-synthesis. Instead, the results showed that the test subjects have individual preferences and opinions about the voices, even though there seemed to be some consensus about some of the perceived voice characteristics of the TTS-syntheses.
4
Kedeby, Magnus. "Från tanke till beställning : om framtagningsprocessen av TTEM/TEMU". Thesis, Swedish National Defence College, Swedish National Defence College, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:fhs:diva-183.
Texto completo da fonteResumo:
När Försvarsmakten beställer materiel från Försvarets Materielverk sker detta genom kravdokumentet Teknisk, Taktisk, Ekonomisk målsättning (TTEM). Dokumentet skall spegla de krav som finns på systemets alla aspekter. Inom Försvarsmakten är det de materielsystemansvariga på högkvarterets produktionsledning som ansvarar för framtagandet. Processen för framtagande innehåller ett antal moment som skall genomföras.
Det är om framtagandeprocessen och dess ingående moment som är denna uppsats ämne. Syftet är att undersöka och utvärdera processen och om möjligt föreslå förbättringsåtgärder. Uppsatsen är uppdelad i en undersökning för att titta hur processen ser ut, samt en utvärdering för att se hur den fungerar i verkligheten. För att genomföra syftet finns ett antal verktyg beskrivna för att kunna mäta kvaliteten och processens funktion.
Resultatet visar att framtagandet av målsättningsdokumenten idag upplevs på ett flertal olika sätt, några av de materielsystemansvariga är negativa, andra aktörer mer positiva. Ett antal förbättringsförslag redovisas slutligen, dessa är främst inriktade på en förenkling av processen för att minska tidsåtgången och förenkla för dem som nyttjar processen.
When the Swedish Armed Forces orders equipment from the Swedish Defence Materiel agency they are using a structured document known as a technical, tactical, economic requirements document(TTEM). This document shall display all the necessary requirements of the equipments all aspects. Within the armed forces it is the officer responsible for each materiel system situated in the armed forces headquarters production department that produces the document. This process contains a number of activities that shall be done.
This essay is about this process and the activities within it. The purpose is to investigate and evaluate the process and if possible suggest improvements. The essay is divided into different parts, one is to investigate how the process is structured, and the other is how it operates in a daily life. To fulfill the purpose there are theories explained to measure the functionality and the quality of the process.
The results shows that the process is seen upon in a number of ways, some are negative, some are more positive. A number of improvements are suggested, mainly to simplify the process in order to reduce time and simplify work for the users
5
Teixeira, João Paulo. "A prosody model to TTS systems". Doctoral thesis, Universidade do Porto, Faculdade de Engenharia, 2004. http://hdl.handle.net/10198/1496.
Texto completo da fonteResumo:
This PhD thesis presents the development of a prosody system for European Portuguese (EP) for text-to-speech (TTS) applications. Basically, TTS systems carry out the automatic utterance of a text and consist in a sequence of several modules. Those modules implement the pre-processing of the text input, the phonetic transcription and the supra-segmental processing that consists in the inclusion of prosodic patterns. The prosody is responsible for a communicative intention and guarantees some naturalness in the uttered speech. The prosodic features consist in the imposition of the timing, characterized by the segmental durations and pauses, the intonation, characterized by the fundamental frequency (F0) curve, and by the intensity curve.
The preparatory work that was fundamental for modelling and testing purposes is presented in the beginning. It starts with a preliminary study about the stressed syllable. This study identifies the variation range of F0, duration and intensity features in stressed syllable along contexts. Then the FEUP-IPB EP speech database that was used in following studies is presented. The database is labelled at the levels of the phoneme, word, sentence and F0. The thesis follows on with the presentation of two algorithms to provide the syllabic splitting of the text and of the phoneme sequences. This chapter ends with a proposed set of rules for the automatic phonetic transcription of the most problematic graphemes in EP.
The proposed prosody model consists of several sub-models, namely, the duration model to predict the segmental durations and the model to predict the F0 pattern.
Two proposals, based in artificial neural networks (ANNs), to predict the segmental durations are presented.
The first proposal consists of one ANN carefully selected concerning its architecture and type as well as the set of input features with the objective of minimizing the error between predicted and measured durations. The second proposal, entitled alternative model, is based on same considerations of the first proposal but uses one dedicated ANN for each phoneme, in a total of 44 ANNs. The alternative model, with dedicated ANNs, improved the final performance.
A model of insertion and prediction of durations of the pauses is proposed, based on a preliminary study over the FEUP-IPB database.
The proposed model to predict the F0 contour is based on the Fujisaki model and consists of two sub-models. One predicts the Phrase Commands’ (PCs) parameters and the other predicts the Accent Commands’ (ACs) parameters.
The PCs and the ACs were manually estimated in 101 paragraphs of the database under the criterion of the minimization of the error between estimated and measured F0 contours.
The prediction of the PCs is performed in two stages. The first stage is carried out by an algorithm responsible for the insertion of the PCs connected to the text and based on a mathematical model obtained from experimental observations. The second stage of the model predicts the PCs amplitude, Ap, and anticipation, T0a, relatively to the initial position. The anticipation allows the determination of the exact position in the speech signal. The two parameters are predicted with ANNs.
A strong connection between ACs and syllables was found in the database. This strong connection justified the adopted methodology of predicting ACs associated with syllables. Therefore, the ACs model consists of one ANN to predict the existence of AC associated with the syllable and other three ANNs to predict the parameter’s amplitude (Aa) and anticipation of the onset (T1a) and offset (T2a) instants.
The final perceptual test using the category-judgment method and the MOS scale resulted in a classification of 4.6 for the natural speech, 4.4 for the estimated F0, 4.2 for predicted durations, 3.1 for the predicted F0 and 2.9 for the complete proposed model (duration and F0 models). The MOS for the complete model is at the ‘Fair’ level.
6
Runnels, Sheila S. (Sheila Sargent). "Self-Perception of Objectivity in the Use of the TTAS". Thesis, University of North Texas, 1995. https://digital.library.unt.edu/ark:/67531/metadc278772/.
Texto completo da fonteResumo:
The purpose of this study was to determine if appraisers using the TTAS in Texas perceived themselves as being objective in the evaluation process. The population for this study was 213 appraisers, both elementary and secondary, chosen randomly from four educational service areas in four regions of Texas. Data were obtained from a 25-item questionnaire mailed to the appraisers. The organization of this study includes a statement of the problem, the research questions, a review of the literature, the methods and procedures used to collect the data, the analysis of the data, and a summary of the findings, conclusions, implications, and recommendations for additional research. Data from the 213 returned questionnaires were treated with the chi-square test of independence. The analysis of data revealed the following: 1. Regardless of the level, elementary or secondary, of the administrator, the majority of respondents held the same views. 2. Regardless of the region of Texas from which the respondents came, the majority of respondents held the same views. 3. Regardless of the number of years of experience of the appraisers, the majority of respondents held the same views. 4. The majority of respondents felt they are objective in their use of the TTAS. The implications are that the TTAS instrument is being used as was its intention, and that the appraisers feel comfortable in the use of the TTAS. Since the TTAS is effective as seen through a majority of respondents, it may be used in future revisions of the current instrument or by other districts as a model by which to begin construction of their own appraisal instruments.
7
Xiong, Xingguo. "Built-in self-tTest and self-repair for capacitive mems devices". Cincinnati, Ohio : University of Cincinnati, 2005. http://www.ohiolink.edu/etd/view.cgi?acc%5Fnum=ucin1123038236.
Texto completo da fonteResumo:
Thesis (Ph. D.)--University of Cincinnati, 2006.Title from electronic thesis title page (viewed Mar. 28, 2006). Includes abstract. Keywords: Microelectromechanical System (MEMS); Built-in Self-test (BIST); Built-in Self-repair (BISR); Yield Analysis; Reliability. Includes bibliographical references.
8
Nilsson, Felicia, e Rebecca Elebro. "Nyhetssveket från TT : En kvantitativ innehållsanalys av TT:s rapportering från norr". Thesis, Umeå universitet, Institutionen för kultur- och medievetenskaper, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-185159.
Texto completo da fonteResumo:
Title: The news betrayal from TT – A quantitative content analysis of TT’s news reporting from the north In the year of 2013 TT-nyhetsbyrån closed down their three local editorial offices in north Sweden with a promise that the news coverage of Norrland would remain the same. In this study we aim to examine if, and how, the journalistic content has changed due to their centralization. Based on theories of media and democracy, the commercialization of journalism and news evaluation, this study investigates different aspects of TT’s journalistic output such as news outlets, news topic, democratic value dimensions, framing, original reporting and sourcing. The material of examination consists of a total of 199 articles which derive from Luleå, Umeå and Sundsvall. Further the material is spread out over two periods of time. More particularly five years before, and five years after the close down. We have employed a so-called synthetic week during both time intervals, meaning that you randomly select Monday one week, Tuesday the following week, and so forth. The result of the quantitative study showed that TT’s news reporting about the municipalities has decreased in all the aspects that have been investigated. The analysis of the result, together with previous research and chosen theories, indicates that TT seems to have become more commercialized and audience-oriented, which may have affected how news is valued. From a democratic perspective it is problematic. As the largest news agency TT plays an important role in Swedish journalism, not least when editorial offices around the country reduce their own news coverage.
9
Carreno, Josua Daniel Pena. "Channel modeling for through-the-earth (TTE) communication systems". reponame:Repositório Institucional da UnB, 2016. http://repositorio.unb.br/handle/10482/20092.
Texto completo da fonteResumo:
Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2016.Submitted by Fernanda Percia França (fernandafranca@bce.unb.br) on 2016-03-22T17:01:54Z No. of bitstreams: 1 2016_JosuaDanielPenaCarreno.pdf: 10327694 bytes, checksum: 8a74661645607108b0f1ee270305f201 (MD5)
Approved for entry into archive by Marília Freitas(marilia@bce.unb.br) on 2016-05-04T12:33:40Z (GMT) No. of bitstreams: 1 2016_JosuaDanielPenaCarreno.pdf: 10327694 bytes, checksum: 8a74661645607108b0f1ee270305f201 (MD5)
Made available in DSpace on 2016-05-04T12:33:40Z (GMT). No. of bitstreams: 1 2016_JosuaDanielPenaCarreno.pdf: 10327694 bytes, checksum: 8a74661645607108b0f1ee270305f201 (MD5)
Este trabalho apresenta modelagem de canal em ambientes de comunicação TTE a partir de modelos analíticos estabelecidos, medidas e simulações eletromagnéticas. Para estes cenários, apresenta-se como contribuição original os resultados estatísticos tanto para a condutividade elétrica efetiva quanto para a atenuação sofrida pelo campo magnético durante a propagação. Os resultados de simulação obtidos aqui, além de confirmarem o comportamento do canal empírico, extrapolam para frequências não estudadas via ferramentas estatísticas.
This dissertation presents channel modeling in TTE communication environments from well-established analytic models, measurements and electromagnetic simulations. For those scenarios, the main original contribution are the statistical results for the effective electric conductivity as well as the attenuation experimented by magnetic field while propagating Through-The-Earth. The simulation results present here, in addition to confirming the behavior of empirical models, extrapolate to frequencies not studied via statistical tools.
10
Lantz, Anton. "Två flyktingsituationer : TT:s gestaltning av flyktingar och asylsökande i Sverige 1992 och 2015". Thesis, Södertörns högskola, Institutionen för samhällsvetenskaper, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-29542.
Texto completo da fonteResumo:
Den här uppsatsen har undersökt hur nyhetsbyrån TT rapporterat om flyktingar under två flyktingsituationer, åren 1992 och 2015. De frågeställningar som ska besvaras är: Finns det skillnader mellan hur TT 1992 skrev om flyktingar från f.d. Jugoslavien, och hur TT skriver om flyktingar 2015? Några delfrågor ska också besvaras: I vilka nyhetshändelser figurerar flyktingar och asylsökande? Får flyktingar eller asylsökande en talan i texterna? Är flyktingar eller asylsökande mer frekventa i positiva eller i negativa nyheter? Dessa frågeställningar har besvarats med hjälp av teorin om diskursiv diskriminering. Metoden som använts har varit en kvantitativ innehållsanalys, där urvalet var 130 st artiklar från 1992, och 203 st artiklar från 2015. Man kan se att TT:s medierapportering om flyktingar och asylsökande har varit skev och ojämn 1992, och fortsätter vara det 2015, i form av vem som får tala och vad själva nyheten handlar om. Man kan även se att medierapporteringen från 1992 och 2015 inte skiljer sig från varandra särskilt mycket, det finns dock skillnader. Nyhetshändelserna har skiftat fokus från brott mot flyktingar till flyktingpolitik. Flyktingar och asylsökande var frekventa subjekt i nyhetstexterna. Nyheterna som flyktingar eller asylsökande medverkar i är till stor del negativa, dock så har neutrala nyheter blivit mer vanliga.
11
Oliveira, Sergio Pries de. "Estudo das tecnicas de soldagem sem tratamento termico posterior (TTPS) em aços cromo-molibdenio". reponame:Repositório Institucional da UFSC, 1991. http://repositorio.ufsc.br/xmlui/handle/123456789/75733.
Texto completo da fonteResumo:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro TecnologicoMade available in DSpace on 2012-10-16T03:56:29Z (GMT). No. of bitstreams: 0Bitstream added on 2016-01-08T17:15:04Z : No. of bitstreams: 1 85047.pdf: 5721035 bytes, checksum: a481c7ea1a90fc17fcfb6609a69bb1ad (MD5)
A técnica de soldagem conhecida como técnica da meia-camada, proposta no código ASME - Seção XI é uma solução alternativa, com o depósito de 4 camadas de solda convenientemente aplicadas sobre o metal de base, foram comparadas em termos de estrutura, tenacidade e dureza das Zonas Térmicamente Afetadas (ZTA's). Ambos os procedimentos são dimensionados para serem utilizados sem a necessidade de um tratamento térmico pós soldagem (TTPS). Estes procedimentos utilizam-se do calor gerado pelo depósito das sucessivas camadas de solda para promover o refinamento e revenimento da ZTA dos cordões de solda das camadas precedentes. Foi feita a aquisição dos ciclos térmicos das soldas executadas, utilizando-se um sistema computadorizado desenvolvido para a aquisição e tratamento de dados obtidos dessas soldagens, com o uso de termopares. Os tempos de resfriamento entre 800-500oC foram analisados e comparados com os tempos obtidos do monograma proposto pelo IRSID. Uma metodologia para a previsão da dureza máxima obtida na Zona Térmicamente Afetada (ZTA) dos cordões de solda da primeira camada, utilizando-se os tempos de resfriamento obtidos dos ciclos térmicos das soldagens experimentadas é introduzida, aplicando-se os algoritmos propostos por Yurioka. Esses valores foram comparados com os valores de dureza medidos na ZTA grosseira dos cordões de solda da primeira camada depositada.
12
Vollebregt, Benjamin John. "The Justification and Implementation of Computer Aided Design (CAD) software into TTSs Apprentice Training Framework". Thesis, University of Canterbury. Engineering Management, 2014. http://hdl.handle.net/10092/8936.
Texto completo da fonteResumo:
Trade Training School is the center of excellence for Maintenance Support (MS) training within the NZ Army. This report investigates the feasibility of incorporating CAD into the current training framework for all five of the MS trades within TTS.
Due to each trade group being vastly different, CAD software had to be adapted to each individually. This is discussed in some detail within the paper. The physical installation of a CAD suite is also included within the report.
TTS is one of the first institutions in NZ to utilise CAD software in the training of tradesmen/ apprentices in NZ.
13
White, Jennifer Jessica. "Development of a Novel Method for Deriving Thresholds of Toxicological Concern (TTCs) for Vaccine Constituents". Scholar Commons, 2013. http://scholarcommons.usf.edu/etd/4852.
Texto completo da fonteResumo:
Abstract
Safety assessment relating to the presence of impurities, residual materials and contaminants in vaccines is a focus area of research at the United States Food and Drug Administration (FDA). Sponsors who submit Investigational New Drug (IND) applications for new vaccine products must report the results of safety assessments to the Division of Vaccines and Related Products Applications (DVRPA). Scientifically defining thresholds of toxicological concern (TTCs) as they apply to vaccine constituents will provide a useful aid to the sponsors and public regarding safety assessments of compounds for which there is little or no toxicity data. TTCs are mathematically modeled and extrapolated levels, below which adverse human health effects are not expected to occur (Kroes, 2004). In this project, we accessed DVRPA's submission databases and open source data to yield an initial chemical test set. Using INCHEM, RepDose, RTECS and TOXNET, we gathered LD50 and TDLo data.
Using a structure-based decision tree, provided in the ToxTree software package, (3) different algorithms (The Cramer extended, the In vivo rodent micronucleus assay, and the Benigni-Bossa rule base for carcinogenicity by ISS) were applied to assign the initial test set (n= 197) of chemicals into structural families based on structural alerts (SAs). This resulted in six (6) potential methods for elucidating TTCs: In vivo rodent micronucleus assay/ LD50, Benigni-Bossa/ LD50, Cramer extended/ LD50, In vivo rodent micronucleus assay/ TDLo, Benigni-Bossa/ TDLo, and the Cramer extended/ TDLo.
After each algorithm designated two structural families each, the distribution of TDLo's and LD50's for each structural family was subjected to a preliminary data analysis using JMP statistical software version 9. Based on an analysis of quantiles, skew, and kurtosis, it was concluded that the TDLo dataset was of poor quality and was dropped from further analysis, and that the In vivo rodent micronucleus assay algorithm failed to partition the initial test set in a meaningful way, so it too was culled from further consideration. This resulted in (2) remaining TTC methods for further consideration: Benigni-Bossa/ LD50 and the Cramer extended/ LD50.
The remaining methods were subjected to internal validation based on Gene-Tox, CCRIS, CPDB, IARC, and EPA classaifications for genotoxic mutagenicity and carcinogenicity. Validation parameters were calculated for both methods and it was determined that the Benigni-Bossa/ LD50 method outperformed the Cramer extended/ LD50 method in terms of specificity (87.2 vs. 48.1%#37;), accuracy (65.2 vs. 52.94%#37;), positive predictivity (66.6 vs. 50%#37;), negative predictivity (64.8 vs. 56.5%#37;), ROC+ (2 vs. 1) and ROC- (1.84 vs. 1.3). These results indicated that the Benigni-Bossa/ LD50 was the most appropriate for calculating TTCs for vaccine constituents.
For each class, the lower 2.5th percentile LD50 was extrapolated to a TTC value using safety estimates derived using uncertainty factors (UF) and adjusting for adult human weight. Final TTCs were designated as 18.06 μg/ person and 20.616 μg/ person for the Benigni-Bossa positive and negative structural families.
14
Jönsson, Ingemar. "Analys RadioNy : En studie om utmaningar och möjlighetervid integration av nytt radiosystem". Thesis, Uppsala universitet, Industriell teknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-303417.
Texto completo da fonteResumo:
This thesis has been conducted at the Swedish Defense Materiel Administration (FMV) on the department of mobile command center with supervised by ÅF. FMV Mobile Command centers main task is to integrate communication systems into Swedish Armed Forces (FM) vehicle systems. FMV has conducted a new radio system that will be integrated in FM. In communications systems various interfaces as mounting interface and connections interface frequent occurs. A mounting interface is an interface were the radio is mounted into a mounting frame or matching, connection interface is the cables and contacts or interfaces similar. During the procurement of the new radio system no requirements were written in the specification that it should fit in the existing mounting interface called mounting frame 42/48. Nor did the connection interfaces stated requirements in detail. The problem formulation of this thesis reads; How is it possible for FMV to work with integration of the new communications system in FM vehicles to create the best conditions, inside the boundaries that is given for this thesis? To get an understanding how integration can be better in FMV, questions were formulated from FMV, which are underlying the further work. A good foundation for the analysis are made from the feasibility on how a specification is written in FM, which laws that would have an effect for public authority and which methods and manuals that is available to aid. Interviews are then conducted with staff from FMV and with co-workers on the concept plant in Enköping, a lot of the tryouts of the new communication systems are done. Four different mounting system concepts on how the integrations can be done are evaluated and analyzed to get to a standing point. The conclusion from the analyze of the mounting frame concepts is that an updated version of the existing mounting frame could be the best. With the addition that the new acquired mounting frame also should have the potential to mount older radio systems. A mounting frame adjusts for the new radio system at the same time as the older fits. In this conclusion recommendations are presented on what FMV could work on to achieve better conditions for the integrations of communications systems. Conclusions that the start of a project is the most important factor, for the whole project to be made. The importance of the knowledge of a change late in a project is much more expensive than early in a project and the project participants have easier to get a clear picture if it is a good startup of a project. To find a common connection interface for the radio systems was not seen as a solution. Instead it is proposed to work with standards where it is possible and detail specifications where it is needed. ISRN UTH-
15
Velásquez, Luis Alexis. "Web-based strategies in the manufacturing industry". Thesis, Durham University, 2000. http://etheses.dur.ac.uk/4202/.
Texto completo da fonteResumo:
The explosive growth of Internet-based architectures is allowing an efficient access to information resources over geographically dispersed areas. This fact is exerting a major influence on current manufacturing practices. Business activities involving customers, partners, employees and suppliers are being rapidly and efficiently integrated through networked information management environments. Therefore, efforts are required to take advantage of distributed infrastructures that can satisfy information integration and collaborative work strategies in corporate environments. In this research, Internet-based distributed solutions focused on the manufacturing industry are proposed. Three different systems have been developed for the tooling sector, specifically for the company Seco Tools UK Ltd (industrial collaborator). They are summarised as follows. SELTOOL is a Web-based open tool selection system involving the analysis of technical criteria to establish appropriate selection of inserts, toolholders and cutting data for turning, threading and grooving operations. It has been oriented to world-wide Seco customers. SELTOOL provides an interactive and crossed-way of searching for tooling parameters, rather than conventional representation schemes provided by catalogues. Mechanisms were developed to filter, convert and migrate data from different formats to the database (SQL-based) used by SELTOOL.TTS (Tool Trials System) is a Web-based system developed by the author and two other researchers to support Seco sales engineers and technical staff, who would perform tooling trials in geographically dispersed machining centres and benefit from sharing data and results generated by these tests. Through TTS tooling engineers (authorised users) can submit and retrieve highly specific technical tooling data for both milling and turning operations. Moreover, it is possible for tooling engineers to avoid the execution of new tool trials knowing the results of trials carried out in physically distant places, when another engineer had previously executed these trials. The system incorporates encrypted security features suitable for restricted use on the World Wide Web. An urgent need exists for tools to make sense of raw data, extracting useful knowledge from increasingly large collections of data now being constructed and made available from networked information environments. This explosive growth in the availability of information is overwhelming the capabilities of traditional information management systems, to provide efficient ways of detecting anomalies and significant patterns in large sets of data. Inexorably, the tooling industry is generating valuable experimental data. It is a potential and unexplored sector regarding the application of knowledge capturing systems. Hence, to address this issue, a knowledge discovery system called DISKOVER was developed. DISKOVER is an integrated Java-application consisting of five data mining modules, able to be operated through the Internet. Kluster and Q-Fast are two of these modules, entirely developed by the author. Fuzzy-K has been developed by the author in collaboration with another research student in the group at Durham. The final two modules (R-Set and MQG) have been developed by another member of the Durham group. To develop Kluster, a complete clustering methodology was proposed. Kluster is a clustering application able to combine the analysis of quantitative as well as categorical data (conceptual clustering) to establish data classification processes. This module incorporates two original contributions. Specifically, consistent indicators to measure the quality of the final classification and application of optimisation methods to the final groups obtained. Kluster provides the possibility, to users, of introducing case-studies to generate cutting parameters for particular Input requirements. Fuzzy-K is an application having the advantages of hierarchical clustering, while applying fuzzy membership functions to support the generation of similarity measures. The implementation of fuzzy membership functions helped to optimise the grouping of categorical data containing missing or imprecise values. As the tooling database is accessed through the Internet, which is a relatively slow access platform, it was decided to rely on faster Information retrieval mechanisms. Q-fast is an SQL-based exploratory data analysis (EDA) application, Implemented for this purpose.
16
Oliveira, Rafael Alves Paes de. "Test orales for systems with complex outputs: the case of TTS systems". Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/55/55134/tde-13092017-085208/.
Texto completo da fonteResumo:
Software testing is one of the most important Software Engineering processes, being the primary activity to check the conformance between the software requirements and its actual behavior. The automation of software testing activities is essential to certify productivity and effectiveness in such activities. Test automation leads testing activities to be conducted under systematic and accurate criteria, raising the chance of testers to reveal faults or inconsistencies. Test oracles are elementary members in software testing automation, being the mechanism responsible for indicating the correctness of software outputs. In testing environments, test oracles can be effectively implemented based on several sources of information about the Software Under Testing (SUT): software specifications, assertions, formal methods (Finite State Machines (FSM), formal specifications, etc, machine-learning methods, and metamorphic relations. Regardless of the implementation strategy, test oracles are vulnerable to false positive/negative verdicts, configuring what the literature describes as the oracle problem. Therefore, test oracles are a non-trivial and challenging object of studies of the software engineering research area. SUTs outputs in unusual formats make it harder the oracle problem. Audio, images, three-dimensional objects, virtual reality environments, complex statistical compositions, etc, are examples of non-trivial output formats. In the software testing context, SUTs with unusual outputs can be called complex-output systems. In this doctorate dissertation, we propose and evaluate a novel test oracle approach for complex-output systems called feature-based test oracles. The purpose of feature-based test oracles is the appropriation of a processing image technique called Content-Based Image Retrieval (CBIR) to collect information from features extracted from the SUTs outputs to compose test oracles. Given a query image, CBIR combines feature extraction and similarity functions to alleviate the problem of searching for digital images in large databases. In previous research, we have integrated CBIR concepts in a testing framework to support the automation of testing activities in processing image systems and systems with Graphical User Interfaces (GUI). In this doctorate dissertation, we extended that framework and its concepts to general complex-output systems, addressing the feature-based test oracle approach. We use Text-To-Speech (TTS) systems to validate empirically our test oracle technique. Through the results of five empirical analyses, three of them conducted in line with problems of a real-world industry TTS system, show the proposed technique is a valuable instrument to automate testing activities and alleviate practitioners efforts on testing complex output systems. We conclude the proposed test oracles are effective because they systematically evaluate the SUTs sensorial output rather than produce verdicts based on subjective specifications. As future work, we plan to conduct investigations towards the reduction of false positives/negatives and the association of the test oracles with machine learning techniques and metamorphic relations.Teste de Software é um dos processos mais importantes da Engenharia de Software, sendo a principal atividade para averiguar a conformidade de requisitos de software e suas saídas. A automatização das atividades de teste é essencial para conferir produtividade e efetividade em tais atividades. A automatização faz com que atividades de teste sejam conduzidas sob critérios sistemáticos e precisos, aumentando a chance dos testadores de revelarem falhas ou inconcistências. Oráculos de teste são membros elementares na automatização do teste de software, sendo o mecanismo responsável por indicar a corretude das saídas do softwre. Em ambientes de teste, oráculos de teste podem ser efetivamente implementados com base em diversos fontes de informação sobre o sistema em teste: especificações de software, assertivas, métodos formais (máquinas de estados finitas, especificações formais, etc), métodos de aprendizagem de máquina e relações metamórficas. Independente da estratégia de implementação, oráculos de teste são vulneráveis a veridictos de falsos positivos/negativos, configurando o que é apresentado na literatura como O problema do Oráculo. Então, na área de engenharia de software, oráculos de teste são objetos de estudo não-triviais e desafiadores. O problema de oráculo é potencializado quando as saídas do sistema em teste são dadas em formatos não triviais como, por exemplo, audio, imagens, objetos tridimensionais, ambientes de realidade virtual, composições estatísticas complexas, etc. No contexto do teste de software, sistemas com saídas não triviais podem ser chamados de sistemas com saídas complexas. Esta tese de doutorado propões e avalia uma nova estratégia de oráculo de teste para sistemas com saídas complexas. O propósito de tal estratégia é a apropriação da técnica de processamento de imagem conhecida como CBIR (Recuperação de Imagem Basead em Conteúdo CBIR) para coletar informações de características extratídas do sistema em teste, compondo oráculos de teste. A partir de uma imagem de busca, o CBIR combina extração de características e funções de similaridade para aliviar problemas de busca em grandes based de imagens digitais. Em pesquisas anteriores, conceitos de CBIR foram integrados em um arcabouço de teste para apoiar a automatização de atividades de teste em systemas de processamento de imagens e sistemas com interfaces gráficas. Esta tese de doutorado estende o arcabouço e seus conceitos para sistemas com saídas complexas em geral. Sistemas Texto-Fala (TTS) foram utlizados para validações empíricas. Os resultados de seis análises empíricas, duas delas condizidas em consonância com problemas de um TTS industrial, revelam que a técnica proposta é um valioso instrumento para automatizar atividaes de teste e aliviar esforços de profissionais da indústria ao teste sistemas com saídas complexas. Conclui-se que a efetividade dos oráculos de teste propostos são devido às sistemáticas análises do conteúdo das saídas dos sistemas em teste, em vez da análises de especificações subjetivas. Os trabalhos futuros vislumbrados devem ser conduzidos no intuito de reduzir número de falsos positivos/negativos e a associação dos oráculos de teste com técnicas de aprendizado de máquina e relações metamórficas.
17
Hsieh, Tsung-Hai, e 謝宗海. "Evaluate the anti-obesity efficacy of the extract of TTES No.12 and its metabolites from Andraca theae". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/59794839876594300835.
Texto completo da fonteResumo:
碩士國立臺灣大學
食品科技研究所
104
Obesity is a critical issue worldwide. According to Nutrition and Health Survey in 2013 indicated that prevalence of overweight and obesity was 38% in Taiwan people. And World Health Organization (WHO) indicate that compare to the normal weight people the obesity people have higher risk of chronic disease which include diabetes mellitus, dyslipidemia, hepatic steatosis and hypertension. The concept of drinking tea is for a long time and widely accepted. However, the strain of Andraca theae which lives on tea leaf and its metabolites called the tea metabolites from Andraca theae that bioactivity is unknown yet. Consequently, this study was aimed to investigate whether extract of TTES No.12 and its metabolites from Andraca theae (TME) have the same or better effect than TTES No.12 tea extract (TE) on prevention of obesity and obesity-induced chronical disease. The animal model used high fat diet and different dose of TME and TE for a period of time. After administrated TME improved serum total cholesterol parameters. However, after administrated TE, our results showed that TE significantly decreased all adipose tissue and adipocyte size via increasing Pref-1and inhibiting downstream signaling pathway. However, TE also significantly improved fatty hepatocytes via increasing Ho-1. Taken together, these results suggested that the content of tea polyphenols play an important role for the prevention of obesity and fatty liver disease.
18
YU, YI-WEN, e 余羿雯. "Skin care activities and antiproliferation effects on skin cancer cells of TTES No. 8, 18, and 21 teas". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/48146451227349522728.
Texto completo da fonteResumo:
碩士元培醫事科技大學
生物科技暨製藥技術系碩士班
104
Teas contained abundant polyphenolic compounds. Previous researches have demonstrated that polyphenolic compounds physiologically play critical roles as antioxidant, antibacterial, anti-inflammatory, inhibiting melanin production and in many functions for skin health. Tea extracts can be very beneficial for human skin care. Effects of extracts from various Taiwan teas on skin care and skin cancer antiproliferation effects were investigated in this study. Green tea and black tea samples were processed from 4 Taiwan Tea varieties (TTES No. 8, 12 , 18, 21), and those tea extracts were analyzed to determine polyphenols composition, antioxidant activity, tyrosinase inhibitory activity, and melanin inhibition of melanoma cells (B16-10). Cell viability of keratinocytes (HaCaT) was assessed by MTT assay to evaluate protection against UVB radiation, and anti-proliferative effect on human epidermoid carcinoma cells (A-431). Results indicated that green tea from large-leafed variety (TTES No. 8, 18, 21) exhibited higher levels of antioxidant activity, reducing power and antiproliferation activity on skin cancer cell line (A-431), better than those of the same varities of tea extracts obtained from black tea products. Our results showed that these effects related with high levels of total phenolics and catechins. Among all tested samples, large-leafed variety TTES No.21 green tea exhibited the highest inhibition activities. Cell cycle analysis demonstrated that large-leafed TTES No.21 green tea extract can suppress human epidermoid carcinoma cells (A-431). The signaling pathways of G0/G1 phase was malfunction and further blocked S phase and G2-M phase leading to cell numbers increased in S phase and G2-M phase and not able to go through normal cell division. Eventually those cells went through apoptosis. However, for the inhibition of tyrosinase activity, inhibitions of melanoma cells to produce melanin ability and anti-UVB effect on keratinocytes were significantly higher in black tea compared with those of green tea. For skin care activity of black tea, not only catechins, theaflavins and thearubigins, and other active polymerized polyphenol compounds also might be contributed function. These findings suggested that TTES No. 18 and 21 are not easily to be processed to famous tea products like "Ruby" and "Hong Yun" as popular summer tea, however, winter tea can still be utilized to produce green tea products for antioxidant and anti-skin cancer, and black tea can serve as cosmetic whitening and anti-UVB radiation skin care product. Therefore, large-leafed variety winter tea products have potential for developing novel skin care products and further adding agricultural value for winter tea products. Keywords: Anti-proliferative, radioprotective, polyphenols, skin cancer, tea.
19
Huang, Hung-Ju, e 黃弘儒. "Effect of Different Water Absorbent Application Rates and Culture System on TTES No. 18 Tea Production andOrchard Soil Elements". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/00648719437862361182.
Texto completo da fonteResumo:
碩士國立屏東科技大學
農園生產系所
102
Tea (Camellia sinensis (L.) O. Kuntze) is a used by picking young tealeaf for drink (perennial woody plant) and an important economic crop in Taiwan. The purpose of this study were to investigate the TTES No. 18 black tea plant growth responses under different tillage systems and combined with application of different water absorbent dosages and impact on soil nutrient elements in order to find the best application combination of cultural system and water absorbent treatments dosage. The results can improve the quality of tea, water-saving on irrigation and less amount of fertilizer applications. Two different cultivation methods (sod culture and clean cultivation) as well as different amount of water absorbent agent (0,125,250 and 375 g g/5.04m2) treatment combinations were tested. The test results showed that: application of water absorbent treatment increased number of tea buds,promote leaves length, leaf width and leaf area growth. The bud leaf length under 125 g/5.04m2 water absorbent treatment increased 0.44 cm, the first leaf width and leaf area increased (0.16 cm and 1.03 cm2) under 375 g /5.04m2 treatment. The second leaf length increased 0.81 cm under 250 g/5.04m2 treatment. The second leaf width and leaf area increased (0.35 cm and 2.93 cm2) under 375 g/5.04m2. Shoots fresh weight increased 162.5 g under 125 g/5.04m2 treatment. Sod cultivation significantly increased fresh weight of bud 245.31 g/5.04m2 as compared to the clean cultivation. Although there is no significant differences on the remaining afronomic traits, but applying water absorbent all showed better performances. It is recommended to apply 375 g/5. 04m2 water absorbent implement in sod cultivation of tea plantation, thus can improve the production of tea and effectively maintain higher nutrient content in the soil.
20
Huang, Hsiang, e 黃翔. "Effect of Urea Foliar Application on Growth and Tea Quality Related Content of Tea Plants (Camellia sinensis L. TTES 12)". Thesis, 2018. http://ndltd.ncl.edu.tw/handle/mepzdz.
Texto completo da fonteResumo:
碩士國立臺灣大學
園藝暨景觀學系
106
Tea plants (Camellia sinenesis L.) are leafy plants. During producing process, nitrogen giving is concerned. Over-fertilization nitrogen in ground would threat economy other than low rate of nitrogen usage. Using foliar fertilization as partial nitrogen resource might be a solution to overcome the disadvantages. Main purposes of this research are to look into how foliar application effect on tea plant (Camellia sinensis L.) growth and tea quality related content in new-born flush. Foliar application or ground application at timing combination and urea dosage are two treatment factor. In first experiment, ‘TTES 12’ tea plants were treated in 2017. ‘After cutting’, ‘fish leaf extend’, ‘two true leaf extend’ are three fertilization timings. Timing combinations are treatments that choose none, one, two and three fertilization timings for nitrogen foliar application and the others for ground nitrogen application. Taking urea as nitrogen source, dosage differentiates are operated by 0.5% 8ml urea solution applying once or 0.5% 8 ml urea solution applying twice, five days as time interval. At 60th days after cutting, whole new-born flushes were investigated and analyzed. Investigated item include length, number of extend leaf of new-born flush and number of emerge flush. Analysis items include total amino acid, total polyphenol and total nitrogen. In 2017 spring trail, more average new-born flush length was showed in double dosage treatments. When concerning about foliar application times effect, choosing two timing and three timing for foliar fertilization are statistically no difference in average new-born flush length. But they still statistically higher than none foliar fertilization and foliar fertilization once. Multiple linear regression are used to analyze effect of ground fertilization and foliar fertilization at timings. Result shows that fertilizing at ‘fish leaf extend’ doesn’t help growing of new-born flush. In 2017 summer trail, ‘fish leaf extend’ timing was excluded, another detail that way of treatments and investigate items are as spring trail. Collected new-born flushes are separated into one bud with two leaves and below part for content analysis. Repeated trail was practiced in 2018 spring again for comparing seasonal discrepancy. General speaking, growth potential of tea plant in spring is weak. At the trial end, new-born flushes are all at ‘banjhi’ stage. Total nitrogen content is lower than summer sample, but total polyphenol concentration is as much as that in one bud with two leaves part in summer trail. Except for total amino acid concentration, samples for double dosage treatment have nearly twice as much as summer ones. According to multiple linear regression, amount of ground nitrogen fertilization at ‘after cutting’ and ‘two true leaves extend’ can be used to predict amount of total nitrogen in spring new-born flush. In summer trail, growth potential of tea plants are high. At the trial end, new-born flushes are all at ‘growing’ stage. Almost 50% content concentrated in part of one bud with two leaves, but it didn’t happen to excess accumulation. According to multiple linear regression, foliar or ground fertilize at ‘two true leaves extend’ both can be used to predict amount of total nitrogen in summer new-born flush, but amount of nitrogen from foliar fertilization at this timing have higher correlation to it. Another experiment explore that how leaves absorb and metabolism urea after urea foliar application. Tea plants with several new-born flush are treated urea solution for whole plant. Treatments are 1% urea solution applying once and 0.5% urea solution applying twice, 128 hours as time interval. Sampling at before urea spray, 1, 2, 4, 8, 16, 32, 64, 128 hours after urea spray, urea concentration in tea leaves of new-born flush are analyzed. Urea foliar application can make urea concentration increase in mature leaves. 1% urea solution treatment have higher instant cumulate than 0.5% urea solution treatment in one hour. Then they will reach stable leaf-urea-accumulating limit and decrease in similar variation trend. And both back to before-treated level after 128 hours. Continuing sampling for 0.5% urea solution treatment, second-time 0.5% urea spray make similar variation trend as the first time spraying. When 32 hours after second-time 0.5% urea spray, it has been in a downward trend. As a result, 0.5% urea solution and five days at least as time interval is more suitable for tea plant to urea foliar fertilize.
21
Wu, Pey-Chyi, e 吳珮琪. "Effect of two organic fertilizers on the growth of TTES No. 12 and Chin-shin Oolong tea plants in acid red and calcareous soils". Thesis, 1998. http://ndltd.ncl.edu.tw/handle/57724330057546581204.
Texto completo da fonteResumo:
碩士國立臺灣大學
農業化學系研究所
86
As the uplifting of living standard in Taiwan, the consumption of tea is in creasing in recent years. More and more customers expect for buying organic t ea because of concerning about their own health. In organic farming system, fa rmers use organic fertilizer instead of chemical fertilizer to protect the env ironment and to maintain the ecosystem balance. However, we don''t know much a bout the effect of tea plants growing on different organic fertilizer. The eff ects of pea-rice hull compost and hog dung manure in acid red soil and calcare ous soil on the growth and nutrient uptake of TTES No.12 and Chin-shin Oolong were studied in this study. Besides, an incubation experiment was set to see t he decomposition and nutrient releasing of the two organic fertilizers in the two soils. In the pot experiment, two organic fertilizers, two soils, and two kinds of tea cultivar were used and chemical fertilizer was as check treatment . There were twelve treatments and each treatment was replicated six times and arranged in randomized completely block design. The tea plants and soil sampl es were sampled after nine months planting. The tea plants were separated into root, stem and leaf and the nitrogen composition, and the concentration of ph osphorous, potassium, calcium, magnesium, iron, aluminum, and manganese were a nalyzed. The pH, electric conductivity of saturation extract, the concentratio n of nitrate nitrogen, ammonium nitrogen and Bray No. 1 extractable P of soils were also determined. There were sixteen treatments and every treatment was r eplicatedthree times in the incubation experiment. The soils were sampled ever y ten days and were analyzed pH, electric conductivity of saturation extract, the concentration of nitrate nitrogen and ammonium nitrogen.In the pot experim ent, TTES No.12 that grew in red soil and applied with hog dung manure had the highestproduction and absorbed most nitrogen among the treatments. The tea pl ants grew better in red soil than in calcareous soil and TTES No.12 grew bette r thanChin-shin Oolong. The nitrogen concentration of the tea plants growing i n redsoil was higher than that in calcareous soil. Both nitrate nitrogen and a mmonium nitrogen concentration in the tea plants was low. Insoluble nitrogen w as the major portion of nitrogen and the insoluble nitrogen concentration of t he tea plants growing in red soil was higher than that in calcareous soil. The trend of total soluble reduced nitrogen and soluble organic nitrogen concentr ationon was similar. In acid red soil, the tea plants absorbed more phosphorou s and the concentration were higher in organic fertilizer treatment than that in chemicalfertilizer treatment. The concentration of potassium was also highe r in red soil and affected by the concentration of calcium in the tea plants. In red soil,the hog dung manure treated plant had the highest calcium concentr ation but that in calcareous soil was higher than in red soil. The magnesium c oncentrationwas higher in organic fertilizer treatment than that in chemical f ertilizertreatment. The aluminum concentration of the tea plants growing in re d soil was significantly higher and that in TTES No. 12.The aluminum concentra tion in TTES No. 12 was higher than that in Chin-shin Oolong.Most aluminum wa s concentrated in roots and iron, too. The manganeseconcentration of the tea p lants growing in red soil was higher than that inother parts. The absorption o f aluminum and manganese was also affected by calcium in the growth medium. In the incubation experiment, the soil pH was increasing slowly at the beginning and then decreasing. Soil with higher application rate of organic fertilizer and higher water content had higher electric conductivity of saturation extra ct. In red soil, the electric conductivity of saturation extract of hog dung m anure treatmentwas higher than that of pea-rice hull compost treatment but the reverse was true in calcareous soil. The ammonium nitrogen concentration in b oth soils was low and decreasing by time. The nitrate nitrogen concentration i n both soils was increasing by time and the application rate of fertilizers. T he nitrate concentration in calcareous soil was higher than that in the red so il.
22
Wu, Pei-Qi, e 吳珮琪. "Effect of two organic fertilizers on the growth of TTES No.12 and Chin-shin Oolong Tea plants in acid red and calcareous soils". Thesis, 1998. http://ndltd.ncl.edu.tw/handle/08290538784892381831.
Texto completo da fonte
23
Huang, Shih-yi, e 黃詩宜. "TTQS(Taiwan TrainQuali System,TTQS)". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/27010877321064795225.
Texto completo da fonte
24
Huang, Wen Juin, e 黃文俊. "TTS Software Implementation". Thesis, 2003. http://ndltd.ncl.edu.tw/handle/86198570998248129893.
Texto completo da fonteResumo:
碩士國立臺灣大學
資訊工程學研究所
91
T. Moh invented an asymmetric key cryptosystem based on tame transformation method called TTM (Tame Transformation Method). Unlike the ordinary discrete logarithm problem, the integer factorization problem, and the elliptic curve discrete logarithm problem which take lots of big number modulo and exponential operations and thus are very time-consuming, TTM operates in a much higher speed. However, since generating and verifying signatures is one of the most important applications of a public key cryptosystem, Chen et al. proposed TTS (Tame Transformation Signatures), a signature version of TTM, in IWAP 2002 [2]. What this thesis contributes is a practical and performance enhanced software system of TTS. Further, some comparisons between the performances of TTS scheme and the only three Federal Information Processing Standards (FIPS) approved algorithms for generating and verifying digital signatures: DSA, RSA, ECDSA are made.
25
Liu, Su-Fen, e 劉素芬. "Exploring Impact of TTQS on Performance and Factors of Pursuing TTQS Gold Medal in Taiwan’s Universities". Thesis, 2018. http://ndltd.ncl.edu.tw/handle/bxn9c7.
Texto completo da fonteResumo:
碩士國立雲林科技大學
企業管理系
106
In the age of rapid globalization, what is the role of continuing education in Taiwan’s universities? What is the impact of TTQS on the performance of continuing education? The paper explores the influence of TTQS on the quality and business performance of universities. We also try to understand why many universities are not interested in pursuing the golden medal of TTQS. This paper uses questionnaire to collect research samples. With respect to those universities who got at least bronze medal of TTQS, we sent out total 98 questionnaires. Finally, we got 50 effective samples with 51% returning rate. Based on the literature review and survey theory, we designed our questionnaire. After getting the samples, we did first the basic statistical analysis and then the one-factor variance analysis in many aspects. Finally, we use multiple regressions to explore two issues. For whether TTQS would affect the performance of continuing education, we find that (1) TTOS would raise the quality of training and (2) TTQS would increase the number of training courses. For the factors of driving the universities to pursuing TTQS Golden medal, we find that: (1) supporting from the leaders of the universities is a key. (2) The efforts of the staff are also a key to decide whether an institute can win the medal.
26
PEI, HUANG SHU, e 黃舒珮. "The research of TTQS construction electronlicalize". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/73920142275493663756.
Texto completo da fonteResumo:
碩士南台科技大學
商管專業學院
97
The study is to make training facilities more efficient in training employees or students by using an electronic Taiwan Train Quality System, or TTQS, which meets the standard of ISO10015. The system is created to help users with their training and comply with the qualifications, which would greatly shorten the administrative process. This study is to help companies improve the training quality, make use of government resources, understand how to use TTQS, evaluate the efficacy of the training quality, and enhance the competitiveness. Only when companies recognize the necessity of TTQS can they reap the benefits financially and reach a certain quality as far as the training is concerned.
27
Amorim, José Alexandre Carvalho. "Rede EDUROAM baseada em FreeRadius com EAP-TTLS". Master's thesis, 2012. https://repositorio-aberto.up.pt/handle/10216/65317.
Texto completo da fonte
28
Amorim, José Alexandre Carvalho. "Rede EDUROAM baseada em FreeRadius com EAP-TTLS". Dissertação, 2012. https://repositorio-aberto.up.pt/handle/10216/65317.
Texto completo da fonte
29
Kan, Hsiao-Chi, e 甘筱淇. "The Study for Establishing TTQS Information System Architecture". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/ctrwnm.
Texto completo da fonteResumo:
碩士國立虎尾科技大學
資訊管理研究所
102
Although many scholars pay more attention on employees’ competence, propose assessment methods likes employee training, training course, training method, training result, and suggest enterprise planning training course or educate internal trainer. However, because training course doesn''t meet enterprise requires, and mechanism can''t keep assessing, evaluating, improving, making the low efficiency on information literacy improvement. The main reason is that enterprise lacking of systematized information system, so can''t check each employee''s ability, and it needs course. Hence, this research reviews previous literature, to understand the framework of Taiwan TrainQuali System. Then, through qualitative interview methods, this research captures the consensus among experts, to combines the 2 TTQS versions: Version for Business Institution and Version for Professional Training Institution, then systemize 19 main indicators and scaling indices. So, this research can establish TTQS information system structure, which not only meets the spirit and process of TTQS, but fits all main indicators and scaling indices. These research results can assist enterprises or organizations to follow PDDRO cycle, then improve competence training quality.
30
Gonzalez, Gaitan Santiago. "Supernova Rates, Rise-Ttmes and their Relations to Progenitors". Thesis, 2011. http://hdl.handle.net/1807/31762.
Texto completo da fonteResumo:
Supernovae are fundamental in astronomy: they inject high mass elements into the interstellar medium enriching the chemistry of galaxies, they feed processes of star formation and active galactic nuclei, and they have been a key for the developments in cosmology of the past decades.
This dissertation presents a set of subluminous type Ia supernovae (SNe Ia) at z>0.1 from the Supernova Legacy Survey (SNLS). These faint and short-lived transients are found in massive and passive host galaxies. We measure a volumetric rate as a function of redshift that is different from the normal SNIa population. The observations point towards a long delay time since the birth of the progenitors systems and argue for progenitor stars of initial low mass.
We calculate a stretch-corrected rise-time since explosion to maximum brightness for different sets of SNe~Ia. We find that a fiducial 17 day quadratic rise is sufficient to explain all SNe Ia, including subluminous ones, arguing for their homogeneity throughout the entire light-curve. Subluminous SNe Ia are powered by as little as 0.05 solar masses of radioactive nickel synthesized in the explosion. Theoretical models need to explain these challenging weak explosions within the framework of SNe Ia.
Finally, we develop one of the first robust automated techniques to identify plateau supernovae (SNe IIP) in large photometric transient surveys. This simple method was tested with a variety of real and simulated SN samples and proved to be effective across different redshifts. Such a photometric typing will be of great power for coming surveys and will allow numerous scientific studies of SNe IIP.
31
Gui, Wang Zheng, e 王正貴. "A Case Study on the Implementation of the TTQS". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/s239d3.
Texto completo da fonteResumo:
碩士健行科技大學
企業管理系碩士班
104
Companies face competitive business environment changes and the trend of globalization, the Executive Yuan Department of Labor with domestic scholars and experts to develop in line with our business needs personnel training system, the Taiwan Training Quality System (TTQS), as a corporate training assessment. In this system can effectively enhance the corporate human resources. Quality human resource base is the foundation of sustainable development of enterprises SME foundation stone for the country''s economic development, the implementation of TTQS for SMEs can have a guide to upgrade their management level. Current research only focused related TTQS issues by questionnaire survey. In this study, four dimensions of organizational strategy, organizational culture, strategic human resources, such as mining social science qualitative research in-depth interviews to explore current issues in Taiwan SME import TTQS core. The study found： a clear policy for the management within the organization has a key influence； dedicated units of communication, coordination, integration and integration mechanisms to reach organizational goals； import TTQS system could reshape the organizational culture of homogeneity and consistency； TTQS system of import For learning and development within the organization and knowledge sharing has a positive effect； continuous improvement TTQS system can construct a complete set of training and because compliance with international quality standards. SMEs can follow this study to improve import TTQS system, to serve effectively improve the quality of training of human resources to achieve strategic objectives.
32
Kang, Pei-Yu, e 康佩鈺. "A Study of Construction the Assessment Indicators for TTQS". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/94171745386121681821.
Texto completo da fonte
33
Tsai, Wen-Cheng, e 蔡文正. "Using TTQS for the performance evaluation of police training". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/48926605371440649442.
Texto completo da fonteResumo:
碩士國立勤益科技大學
工業工程與管理系
99
With the rapidly changing times and social development and technological evolution, the timing has been into the 21st century. "Excellence performance" is all types of organizations joined forces to spare no pains in pursuit of the goal, the organization of this, non-profit organization that. Besides, people also look forward to the executive, the staff must be more actively to strengthen the organizational capacity and effectively improve its administrative efficiency to meet the needs and expectations of people. For the authority departments, the resources include manpower, material and financial resources three categories. Human resources is in a dominant position in the rapid transmission of knowledge and modern technology, continuously and effectively to enhance learning and ability, can not be eliminated by modern society. For this purpose, a planned education and training to ensure training quality and performance, enhance the quality of human resources become the most important organs of the subject. Police departments which face criminal practices emerging needs of a wide range of people, police officers must meet the trend of the times to keep learning, to ensure the quality of police services, improve the diligence and business satisfaction. In this study, Taiwan TrainQuali System (TTQS) is applied with the police existing system of performance management training to survey Analytical Hierarchy Process (AHP) and procedures analysis, to explore affect the quality of police training system into TTQS critical success factors of the order and weight, complete quantitative analysis. Next to In-depth interviews for qualitative analysis, and internal organs through the police, the course instructor interviews, that the respondents who import for TTQS cognition, in particular by the view, and then with the results of quantitative analysis to compare their still the need to strengthen education and training in organ systems within the critical factors. Finally, the use of Taiwan TrainQuali System (Plan), (Design), (Do), (Review), (Outcome) to construct a training for the police authority performance management mechanisms to provide police department into TTQS training quality system.
34
Chang, ChaoWei, e 張朝瑋. "A Study of TTQS professional’s service quality & service satisfaction". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/30796224997560262766.
Texto completo da fonteResumo:
碩士實踐大學
企業管理學系碩士班
99
The research investigates the general satisfaction and survey from professional who have trained in the TTQS (Taiwan Train Quality System). These questionnaires offer for three kinds of 457 professional staffs. (The professional staffs have a total assessment committee of 200 members in 2010 of this year. There are 139 counselors and 118 trainers.) The research found that the entire system of TTQS and each service center, which offers quality of service, is generally satisfied of professional staffs; in addition, the SOP (standard operate process) should abide by the provisions of the rights and obligations has also shown a high degree of satisfaction level. Finally, studies have also learned that more than 90% of the three categories are considered to create an exit mechanism for the officials deemed to be incompetent. According to this situation, the research makes some suggestions: 1. More than 90 percent of the three types considered to create an exit mechanism for the officials deemed to be incompetent. The different identity will affect the cognition of ideal exit mechanism; the assessment committee members and counselors regarded that the ethical norms will be the perfect exit mechanism; the educational trainers think that the student satisfaction is optimum exit mechanism. As a result, most of professional believe that the exit mechanism can enhance the over level of exit, so it recommendations TTQS exchange control units can follow-up that to be proceed with the direction. 2. Up to 93 percent members of the assessment considered that the district service center sends (connection) number of cases is really reasonable this year. The point also represents the year for exchange control units and the district service center have received as the largest result. It improved the past of problems for the case system; moreover, it more confirmed the fairness and practicality since start using the system of automatically sent the case. After that, when they follow this system, it reduce the injustice situation. 3. District Service Center for three categories of administrative processes is showing a high degree of overall satisfaction and from satisfaction Average scores were as high as 5.5 or more points of view. It displays this year of the SOP planning is really appropriate, and fit in with the expectations of all parties. In view of next year, There will be a new TTQS indicators, as a result, the follow-up study is recommended for new indicators to be measured again to view the index can reflect whether the cognition of subjects as well as the basis for improving the TTQS system. 4. SOP for the three categories shall comply with the provisions of the rights and obligations are highly satisfied (95%), and high 94% of people think that the most effective way to enhance the professionalism of the participating TTQS seminar, followed by participation TTQS training. In view of this, TTQS exchange control units should continue to set up a series of training courses Process, by managing the design and planning, to enhance their professionalism. In addition, the research will enquiry and survey about SOP in 2010, and the result will also be as a reference for follow-up by editing SOP Data. For the next year’s new and revised SOP, and recommendations for follow-up study could be the contents of the new SOP for a review, then asked three staff again whether the provisions of the new SOP clarity and satisfaction.
35
Fauth, Christiane [Verfasser]. "Untersuchung der Anwendungseigenschaften transdermaler therapeutischer Systeme (TTS) und Entwicklung eines TTS mit einstellbarer Okklusivität / vorgelegt von: Christiane Fauth". 2003. http://d-nb.info/970628153/34.
Texto completo da fonte
36
LIN, LIANG-CHUN, e 林俍君. "The Implementation of the TTQS --- A Case Study of an Association". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/73380454667682710474.
Texto completo da fonteResumo:
碩士中華科技大學
經營管理研究所
105
Based on the TTQS, this study which combines the development of human resources investment and the effective investment of government resource by utilizing a good framework of training quality system, is to improve the functioning of manpower training system, and implement the quality of training in order to further maintain and achieve the performance goals of the organization. Through this study, the evaluation of training effectiveness, the system and evaluation tool, these three are mutually closely related. For the Association, TTQS is indeed a viable solution to construct an effective education and training quality system by playing the role of TTQS education and training as well as taking advantage of the TTQS five major processes PDDRO. The key success of benefit from the import TTQS to enhance its competitiveness, mostly relies on top management commitment and support and full participation and acceptance. This study focus on both the personal voluntary participation in vocational training and winning the second expertise, are helpful for the future career development. In addition, there are many potential added value, namely, the ability to upgrade themselves, reduce occupational injuries, and develop their potential, these are all proven that TTQS for human resources development and investing in oneself are both worthwhile.
37
Tsai, Jia-Ling, e 蔡佳玲. "An Exporatory Study of Applying SOA Cloud Computing Services on TTQS". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/02343824260659057810.
Texto completo da fonteResumo:
碩士中原大學
資訊管理研究所
100
In this thesis, we design and implemented a prototype framework which integrates the Service-Oriented Architecture (SOA) cloud computing and the Taiwan Training Quality Systems (TTQS), developed by the Bureau of Employment and vocational Training (BEVT) of Taiwan. According to Balanced Scorecard, the prototype system five dimensions: PLAN, DESIGN, DO, REVIEW, and OUTCOME are selected as key factors. SOA, cloud computing and SOA cloud computing are new and very important technologies in the decades, TTQS is widely used in Taiwan industry and organizations. These lead to build a framework to explore the capability of cloud computing SOA for TTQS. Based on the Object-oriented principle of Balanced Scorecard, Unified Modeling Language (UML) technology, model-driven architecture (MDA) tools, we integrated five dimensions of TTQS and developed a prototyping framework and applied it to TTQS industry. Experimental results show that the SOA cloud computing works very well for TTQS. The integrated solution that applies SOA cloud computing can help the industry to achieve the goals of IT govermance. Keywords：service-oriented architecture (SOA),cloud computing sevices,Taiwan training quality system (TTQS),Balanced Scorecard
38
Hung, Kuo-Hsing, e 洪國興. "An Implementation of Corpus-based Mandarin TTS System". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/41977574668841819589.
Texto completo da fonteResumo:
碩士國立交通大學
電信工程系所
95
Synthesis units in Mandarin Text-to-Speech system have migrated from small inventory of base-syllables to a large corpus. In this thesis, a corpus-based Mandarin Text-to-Speech system is implemented. Besides integrating the present text analyzer and the prosodic information generator, the study emphasizes on designing a unit-selection algorithm to solve the two main problems of searching all possible synthesis unit candidates in a huge corpus efficiently and selecting an appropriate unit sequence. We improve the efficiency of the continuous-correlative comparison method without decreasing the quality of the synthesis waveforms. Also we re-define the cost function used in the unit selection. Finally, for users’ convenience, we design a graphical user interface for this system. The user can directly type his input text, and get the synthesis waveform and some intermediate information automatically.
39
Wu, Pei-Ying, e 吳佩穎. "Unit Selection for Corpus-based Mandarin TTS System". Thesis, 2005. http://ndltd.ncl.edu.tw/handle/15557223197301379256.
Texto completo da fonteResumo:
碩士國立交通大學
電信工程系所
93
Synthesis units in Text-to-Speech system have developed from base syllable to waveform units of variable lengths. A set of corpus-based text-to-speech synthesis technologies for Mandarin Chinese usually comprises two main problems to solve：How to find all possible candidates in speech corpora effectively? How to select appropriate synthesis unit to concatenate? Firstly, the thesis presents a continuous-correlative comparison method to solve searching candidates’ problem. Secondly, cost function is used to find the appropriate synthesis unit retrieved from the corpus and concatenated to produce the output speech. Finally, we use a subjective test called Mean Opinion Scores (MOS) to test whether our synthesized speech is natural or not. The assessment indicates our Corpus-based Mandarin TTS System indeed significantly improve the naturalness of synthesized speech quality. Besides, we also analyze synthesized speech to give advices in the future works.
40
Cheng, Ya-Lun, e 鄭亞倫. "The Implementation of Mandarin TTS on Android Platform". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/79137902335826221961.
Texto completo da fonteResumo:
碩士國立勤益科技大學
電機工程系
99
In this paper, the Mandarin text-to-speech technique is employed to accomplish the implementation of voiced E-book on the Android platform. Since a transformation from the text of E-book to the corresponding speech, it makes the reading more effortless and relaxed. The text-to-speech(TTS) system, which consists of the text analysis, the recurrent neural network(RNN) based prosodic generator, the synthesis unit with 411 Chinese syllable waveforms, and the pitch-synchronous overlap and add (PSOLA) speech synthesizer, is the core of the system proposed and is implemented with C++ programming language. Then, the user interface of the system proposed is achieved by using the Java language. Finally, the experimental results confirm that the complete system with memory required of 5MB is able to provide the fluent and clear speech in real-time.
41
Huang, Ming-yi, e 黃明怡. "A Assess of the Personnel Training Institutions in Northern Taiwan Adopt TTQS". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/n744yy.
Texto completo da fonte
42
Chen, Mei-Hui, e 陳美惠. "Application of Neural Network for Optoelectronic Technology to implement TTQS Performance Evaluation". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/tj9r82.
Texto completo da fonteResumo:
碩士國立勤益科技大學
研發科技與資訊管理研究所
101
In recent years, global PV market has grown rapidly, and the optoelectronics industry has been focused by the Government with commitment, whether it is technology enhancement or sources of law program development, government has actively promoted. Optical Science and Technology Association, according to the scope of the definition of optoelectronic products, optical industry can be divided into six categories: optical components, optical displays, optical input and output, optical storage, optical communications, laser and other optoelectronic applications, etc. category. As the industry is considered developed in the late stage, in personnel training and technical, and industrial growth rate is the need to invest more resources; therefore to enhance the overall quality of its manpower, to develop staff potential and to strengthen the "knowledge management" and other courses for the optoelectronics industry, functioning as nurturing talent personnel. Effectiveness evaluation and research designing, this study is to explore the use of neural network photoelectric technology industry, and implementation of training quality assessment system in Taiwan (Taiwan TrainQuality System, TTQS) is divided into two phases. Provided by VTC 99 the database of TTQS, assessment input to the neural network learning predict the important assessment indicators. The second phase, the results of the neural network learning, in-depth interviews questionnaire design, used as a qualitative analysis of the job, in order to understand the actual needs and feelings of the photoelectric technology industry, and to explore the qualitative and quantitative differences in order to enrich and corroborated the conclusions and recommendations of the Institute. All three aspects of the study by quantitative and qualitative analysis of the photoelectric technology industry import TTQS, to increase the company's operating performance, including research and development, management, process, etc. Secondly, according to the list of functions of the gap between design training courses, and with the department KPI combined to achieve synergy effects. Hope that the recommendations proposed in this study can provide the future optoelectronic technology industry to implement import TTQS reference basis.
43
HOU, PING-LIANG, e 侯秉良. "The Study of TTQS Professional Counseling Consultants Job Involvement and Job Satisfaction". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/razd4k.
Texto completo da fonteResumo:
碩士國立中正大學
勞工關係學系碩士在職專班
105
For helping the enterprises to improve its employees’ competencies, the government implements the Talent Quality Management System (TTQS). A special team, composed of assessment committee, counselors and training instructors, is formed to secure the quality of professional services for the organization that institutes TTQS.In the special team, the counselor is assigned to assist organization embedding the TTQS system into its training system. In order to promote TTQS, counselors play a very important role in addition to the supports from high-level management and training staffs. The main purpose of this study is to explore the motivation of professionals to be TTQS counselors and the relevant factors that affect the job involvement and job satisfaction of TTQS professional counselors. In this study, the author conducted a survey and interviews to gather data from TTQS counselors. Based on the analysis of both statistics and interviews, the author found the following important findings: 1.The benefits of future career development and helping organization are the main motivations of professionals to become TTQS counselors. 2.Counselors’ attitude toward the TTQS project is the enthusiasm as a professional helper. 3.Organization’s determination and supports to the TTQS project influence TTQS counselors’ job involvement and job satisfaction. 4.To the TTQS counselor, contribution to the industry is more important than the financial compensation they received. 5.TTQS counselors are striving to fulfill organizations’ needs in building and improving TTQS.
44
Lo, Ying-Chi, e 羅瑛琪. "A Case study of training methods on Orientation Training by TTQS approach". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/28432972344761523244.
Texto completo da fonteResumo:
碩士明新科技大學
工業工程與管理系碩士班
103
An enterprise shall value education and training as the corporate knowledge investment in the era when knowledge, technology and administration alter rapidly. The high-tech industry ranks the top that leads Taiwan’s economics where the semiconductor business is the greatest contributor with the significant output, so the frontline technicians as the key role in the industry serve as not only the major source of corporate productivity but also the crucial determinant to the quantitative and qualitative output of finished items with the personal operating skills and efficiency. Given that, the author employed the talent quality-management system (TTQS) as the methodology to explore the issues on education & training and attempted to discuss course(concept type、opersting type) diverse training methods(about the law、e-Learning、drill model law) affect the effectiveness of the pre-service education & training for technical employees in the semiconductor industry through further realization of the semiconductor industrial attribute besides the occupational nature of technical workers and the institution of the present education & training. The quantitative methodology applied to the study with the data consisting of the after-class questionnaires, academic tests and technical accreditation acquired on the site assayed after the onsite trial. The findings show the significant impact of varied training methods for varied courses on the learners’ learning effectiveness. Consequently, a training authority/unit shall, in construing the overall training system and planning the program concerned, deliberate the targeted learners along with the skills, knowledge and courses required prior to the adequate training methods, adequate training materials and related instructions opted, which can indeed achieve the training effectiveness estimated by the company. Keywords: Education & training、Training methods、Effectiveness assessment for education & training、TTQS
45
Smith, Roger Owen. "Sensitivity analysis of traditional and trichotomous tailored sub-branching scoring (TTSS) scales". 1993. http://catalog.hathitrust.org/api/volumes/oclc/31455956.html.
Texto completo da fonteResumo:
Thesis (Ph. D.)--University of Wisconsin--Madison, 1993.Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 155-177).
46
KUO, YU-CHAN, e 郭玉嬋. "The Influences of Growth of TTQS across years on Business Training Results". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/75427759437782756848.
Texto completo da fonteResumo:
碩士國立臺灣科技大學
企業管理系
100
With the advent of the Knowledge-Based Economy, enterprises pay more and more attention to human resource development and manpower training. Enterprises need the best people to expect to sustainable development in the highly competitive times. In order to enhance the professional competence of personnel, development of service industries, strengthen labor productivity, and enhance national competitiveness, The Bureau of Employment and Vocational Training (BEVT) established TTQS(Taiwan TrainQuali System) to enhance the quality and performance of the training of personnel. The purpose of this research is to explore the relationship between the assessment scores of TTQS and Training effectiveness. Further explore the each dimensions of the assessment scores of TTQS incremental impact on training effectiveness. Hope that the results of this study can be used as industry, government, academia implementing TTQS reference. In this study, our samples are the company involving assessment of TTQS for two consecutive years in 2010 and 2011. Use the secondary data to analysis. Results of our study found that (1) If enterprises can improve the integrity of the implementation in the planning dimension, the effectiveness of trained staff, the diffusion effect of training organizations, and other special training performance will effectively improve. (2) If enterprises can improve the integrity of the implementation in the design dimension, doing dimension and review dimension, the effectiveness of the overall training effectiveness will effectively improve. In conclusion, Implementation and continuous improvement the TTQS to achieve its integrity, will be able to effectively enhance the effectiveness of training.
47
Ku, Ming-Cheng, e 古旻晟. "Establishing enterprises implement the human resources promotionwith Union TTQS certification system performance". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/72718414388156472673.
Texto completo da fonteResumo:
碩士國立勤益科技大學
工業工程與管理系
98
Many small and medium corporations in Taiwan lack of spared funds to carry out their internal training, resulting in the failure of this sector to realize human resource education and training. This makes education and training a critical issue, as many scholars said that human resource represents corporate internal asset. Consequently, the Bureau of Employment and Vocational Training, Council of Labor Affairs made reference to overseas cluster education and training and, since 2004, began making the 「Union Program of assisting enterprises in upgrading human resources」 happen. this program is designed to assist and encourage professional organizations, legal bodies and businesses of all trades to plan and execute, in combination with related businesses, advanced on-job training for employees, to diffuse and share their experiences and resources of education and training, and to upgrade corporate human resources, so as to construct the foundation for industrial or regional upgrade and development. The research has the joint training program in Taiwan as the subject; this study applies association rule, in respect to the training courses (talent training, innovation, quality training) of the corporations targeting at joint training, to identify the correlation between these courses and the scores on TTQS (Taiwan Train Quality System) score card, then, employs performance matrix to verify how much the joint training program is realized, and further to identify the education courses that are beyond or under the resources. Lastly, this study is hoped to identify the key education courses for each joint training target to serve as reference for future formulation of training courses, so that any enterprise that is investing in human resources can design its education courses by itself, and, by making reference to the excelling courses provided by this study, to uplift the total human resource performance of the enterprise.
48
LIN, LI-SHIN, e 林俐馨. "The Relationship between TTQS Evaluation System and Operating Performance of Training Institutions". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/z9p5p8.
Texto completo da fonteResumo:
碩士國立臺灣科技大學
管理研究所
105
By the 1980s, the global economic environment has changed, resulting in industrial restructuring and even relocation factories, and the domestic employment market has an oversupply dilemma, and the structural unemployment problem appears at this time. Since 2005, according to the Executive Yuan's "agenda for development services and programs of action < 2004-2008 > “for "training service industry development measures “in the provision, in order to establish our training industry quality certification system，namely the status of " talent development Quality Management System (Taiwan Train Quality System, referred TTQS) combined civil training institutions , to ensure the reliability and accuracy of the training process. This evaluation system reference to an earlier national human vocational training policy of Britain LIP, Switzerland ISO10015, Europe and Australia, etc., to develop a suitable part of the evaluation system for the current assessment system PDDRO, which implies 19 check evaluation indicators. The status is the global talent cultivation program and government policies to nurture talent guidance to the intelligence, Internet of Things, intelligent robots, big data and Productivity 4.0 and other issues with the project plan. Through observation, evaluation and analysis of the existing industry association, which has been made with intelligence and networking technology to operate training courses, the relevance of TTQS evaluation system for the performance of its operations. This study discussion on four points: 1.Specifications, application process and related specifications. 2.Examine the government to promote TTQS nearly 10 years, the understanding and acceptance for people outside the non- evaluation unit level. 3.In this study B Company have improvement in efficiency and operational performance of internal governance. 4.Series of B Company to" intelligence and networking technology talent class" under government unchanged policy to be sustainable. Keywords: TTQS, TTQS training institutions Edition, RFID, and smart things, productivity 4.0, abstract.
49
Zhong, Xiang-Rui, e 鐘祥睿. "An Improvement on the Implementation of Taiwanese TTS System". Thesis, 2002. http://ndltd.ncl.edu.tw/handle/78638174668471946347.
Texto completo da fonteResumo:
碩士國立交通大學
電信工程系
90
In this thesis, an improvement of the TTS system, developed previously in the Speech Processing Lab of NCTU, on the following aspects is presented. Firstly, a “Chinese-to-Taiwanese” lexicon is built to solve the out-of-vocabulary problem of text analysis using Taiwanese lexicons only. It also makes the system possess the capability of processing Chinese text. Secondly, several rules of constructing compound words are added. Thirdly, a correlation-based pitch mark detection is employed to provide more accurate pitch information for the training of the RNN prosody synthesizer. Fourthly, the structure of RNN prosody synthesizer is changed. It uses one RNN with different input features for the generation of each type of prosodic information. Lastly, a new prototype Taiwanese TTS system is implemented on the PC with Windows 98/NT.
50
Lin, Shun-Jie, e 林順傑. "Myna：A Development Tool for Mandarin - Taiwanese MT / TTS System". Thesis, 2000. http://ndltd.ncl.edu.tw/handle/61535138499153992371.
Texto completo da fonteResumo:
碩士國立成功大學
資訊工程研究所
88
In this thesis, two of the most commonly used languages in Taiwan (Taiwanese and Mandarin) are analyzed and the results are used to build modules of Mandarin—Taiwanese Machine Translation (MT) System. In order to provide the MT System a learning function, a system called ”Myna” is proposed. It has four units： First, Bilingual Dictionary/Modification Unit—modifying bilingual dictionary online. Second, Phonetic Alphabet Setup Unit — Set up the Taiwanese spelling words according to user’s habit. Third, Balanced Sentences and Synthesis Syllable Collection Unit — Collects the balanced Taiwanese sentences and provides Taiwanese Synthesis Syllables. Fourth, Interactive Learning Unit — This unit enables users to modify the translations and add new words to the dictionary. Based on Myna development system, a Mandarin-Taiwanese MT prototype system is created. We can find the correct rate of sentence translation in Mandarin — Taiwanese MT prototype system base on Myna comes from 63.4% and 62.1% to 75.6% and 74.7%. And also because of the improvement of correct rate of sentence translation, the mean opinion scores (MOS) and the recognizable rate have a great improvement on TTS system. Myna system provides the MT prototype system a learning module; meanwhile, it greatly improves the efficiency in MT prototype systems.