Bibliografias temáticas / TINTE

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "TINTE"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 5 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "TINTE".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "TINTE"

1

Álvarez García, Juan. "PRODUCCIÓN Y COMERCIALIZACIÓN DEL TINTE EN UGARIT". ISIMU 23 (23 de dezembro de 2020): 21–39. http://dx.doi.org/10.15366/isimu2020.23.001.

Texto completo da fonte
Resumo:
La cuestión del tinte en la antigüedad ha atraído a lo largo de la historiografía un gran interés por parte de los especialistas. Para esta línea de investigación, Ugarit ofrece grandes posibilidades de estudio tanto textual como arqueológico. Así pues, los tintes que aparecen con más frecuencia en las fuentes son el azul, la púrpura, el rojo y el verde, cada uno con una serie de materiales y procesos específicos necesarios para ser fabricados. Igualmente, se han identificado varias estructuras con posibles talleres donde se llevaría a cabo la manufactura del tinte. Por otro lado, las fuentes también nos hablan de la fama internacional que adquirieron estos tejidos, siendo altamente cotizados en cortes extranjeras y distribuidos a través de redes diplomáticas y comerciales.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Hagel, Ulrike. "In der Tinte". Zeitschrift für Literaturwissenschaft und Linguistik 39, n.º 3 (setembro de 2009): 162–76. http://dx.doi.org/10.1007/bf03379547.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Pöhls, Christin, e Maike Busker. "Experimente mit blauer Tinte". CHEMKON 22, n.º 3 (julho de 2015): 138–41. http://dx.doi.org/10.1002/ckon.201410253.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Blume, Ralf. "Von Gift bis Tinte". Deutsche Heilpraktiker-Zeitschrift 14, n.º 02 (fevereiro de 2019): 24–29. http://dx.doi.org/10.1055/a-0863-1968.

Texto completo da fonte
Resumo:
SummaryIn der Homöopathie gibt es zahlreiche Mittel tierischer Herkunft. Dabei wird entweder das Gift, eine Absonderung des Tieres wie Milch oder das ganze Tier verwendet. Bei potenzierten Schlangengiften spielen häufig Hämorrhagien eine Rolle, wohingegen Spinnengifte eher bei Beschwerden des Nervensystems angezeigt sind. Sepia und Asteria rubens haben einen großen hormonellen Einfluss und sind mit ihren jeweiligen Leitsymptomen in Phasen hormoneller Umstellung angezeigt.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Burdinski, Dirk, Milan Saalmink, Jeroen P. W. G. van den Berg e Cees van der Marel. "Universelle Tinte für den Mikrokontaktdruck". Angewandte Chemie 118, n.º 26 (26 de junho de 2006): 4461–65. http://dx.doi.org/10.1002/ange.200600310.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Schmidt‐Mende, Lukas, Selina Olthof e Vladimir Dyakonov. "Eine Halbleiter‐Tinte für die Zukunft". Physik in unserer Zeit 50, n.º 6 (novembro de 2019): 298–304. http://dx.doi.org/10.1002/piuz.201901550.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Rojas Lazo, Oswaldo, Daniel Mavila Hinojoza e Nora Rojas Pérez. "Insumos ecológicos en la serigrafía textil: Caso peruano". Industrial Data 14, n.º 1 (22 de março de 2014): 034. http://dx.doi.org/10.15381/idata.v14i1.6207.

Texto completo da fonte
Resumo:
La serigrafía textil utilizada por las microempresas y pequeñas empresas (MYPE) del Perú se caracteriza por ser artesanal, lo que supone que utilizan tecnologías limpias, sin embargo, no utilizan insumos ecológicos. El Perú es un país rico en tradición en el uso de tintes naturales desde las culturas preincas e incas. En la actualidad dicha tradición se encuentra limitada a prendas elaboradas para los turistas extranjeros y en lugares muy alejados y de difícil acceso. En los ensayos realizados para obtener un tinte natural para el proceso de estampado se han hecho pruebas con el eucalipto (Eucalyptus), y se han obtenido buenos resultados con el sistema constituído por el concentrado de hojas de eucalipto y almidón como vehículo.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Sikik, Ugur Emre. "TINTE analysis of PBMR reactivity insertion transients". Nuclear Engineering and Design 238, n.º 11 (novembro de 2008): 2916–24. http://dx.doi.org/10.1016/j.nucengdes.2008.02.024.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Sun, Jun, Ximing Sun e Yanhua Zheng. "Transient Study on the HTR-PM with TINTE-vPower Coupling Code Package". Science and Technology of Nuclear Installations 2020 (25 de agosto de 2020): 1–14. http://dx.doi.org/10.1155/2020/5090597.

Texto completo da fonte
Resumo:
The high-temperature gas-cooled reactor pebble-bed module (HTR-PM) nuclear power plant consists of two nuclear steam supply system modules, each of which drives the steam turbine by the superheated steam flow and is fed by the heated-up water flow. The shared steam/water system induces mutual effects on normal operation conditions and transients of the nuclear power plant, which is worthy of safety concerns and intensive study. In this paper, a coupling code package was developed with the TINTE and vPower codes to understand how the HTR-PM operated. The TINTE code was used to analyze the reactor core and primary circuit, while the vPower code simulated the steam/water flow in the conventional island. Two TINTE models were built and coupled to one vPower model through the data exchange in the steam generator models. Using this code package, two typical transients were simulated by decreasing the primary flow rate or introducing the negative reactivity of one module. Important parameters, including the reactor power, the fuel temperature, and the reactor inlet and outlet helium temperatures of two modules, had been studied. The calculation results preliminarily proved that this code package can be further used to evaluate working performance of the HTR-PM.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Pöhls, Christin, e Maike Busker. "Titelbild: Experimente mit blauer Tinte (CHEMKON 3/2015)". CHEMKON 22, n.º 3 (julho de 2015): 105. http://dx.doi.org/10.1002/ckon.201590004.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "TINTE"

1

Waibel, Günther. "Miniaturisiertes Dosiersystem zur geregelten Dosierung von Tinte in einem Schreibgerät". [S.l. : s.n.], 2008. http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-36023.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Pretorius, Louisa. "Comparative study between a two–group and a multi–group energy dynamics code / Louisa Pretorius". Thesis, North-West University, 2010. http://hdl.handle.net/10394/4947.

Texto completo da fonte
Resumo:
The purpose of this study is to evaluate the effects and importance of different cross–section representations and energy group structures for steady state and transient analysis. More energy groups may be more accurate, but the calculation becomes much more expensive, hence a balance between accuracy and calculation effort must be find. This study is aimed at comparing a multi–group energy dynamics code, MGT (Multi–group TINTE) with TINTE (TIme Dependent Neutronics and TEmperatures). TINTE’s original version (version 204d) only distinguishes between two energy group structures, namely thermal and fast region with a polynomial reconstruction of cross–sections pre–calculated as a function of different conditions and temperatures. MGT is a TINTE derivative that has been developed, allowing a variable number of broad energy groups. The MGT code will be benchmarked against the OECD PBMR coupled neutronics/thermal hydraulics transient benchmark: the PBMR–400 core design. This comparative study reveals the variations in the results when using two different methods for cross–section generation and multi–group energy structure. Inputs and results received from PBMR (Pty) Ltd. were used to do the comparison. A comparison was done between two–group TINTE and the equivalent two energy groups in MGT as well as between 4, 6 and 8 energy groups in MGT with the different cross–section generation methods, namely inline spectrum– and tabulated cross–section method. The characteristics that are compared are reactor power, moderation– and maximum fuel temperatures and k–effective (only steady state case). This study revealed that a balance between accuracy and calculation effort can be met by using a 4–group energy group structure. A larger part of the available increase in accuracy can be obtained with 4–groups, at the cost of only a small increase in CPU time. The changing of the group structures in the steady state case from 2 to 8 groups has a greater influence on the variation in the results than the cross–section generation method that was used to obtain the results. In the case of a transient calculation, the cross–section generation method has a greater influence on the variation in the results than on the steady state case and has a similar effect to the number of energy groups.
Thesis (M.Ing. (Nuclear Engineering))--North-West University, Potchefstroom Campus, 2011.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Waibel, Günther [Verfasser]. "Miniaturisiertes Dosiersystem zur geregelten Dosierung von Tinte in einem Schreibgerät / Günther Waibel". Aachen : Shaker, 2008. http://d-nb.info/1161305513/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Wolter, Eike. "Der Tod in Tinte : Eine Untersuchung zum Thema Tod in Cornelia Funkes Tintentrilogie". Thesis, Linnéuniversitetet, Institutionen för språk (SPR), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-24088.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Giannoulis, Elena [Verfasser], e Irmela [Herausgeber] Hijiya-Kirschnereit. "Blut als Tinte. Wirkungs- und Funktionsmechanismen zeitgenössischer shishōsetsu / Elena Giannoulis. Hrsg.: Irmela Hijiya-Kirschnereit". München : Iudicium Verlag GmbH, 2014. http://d-nb.info/1059227207/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Molina, Romero Marisol. "Propiedades dosimétricas de las películas de tinte radiocrómico EBT3 irradiadas con electrones de alta energía". Tesis de Licenciatura, Universidad Autónoma del Estado de México, 2017. http://hdl.handle.net/20.500.11799/66087.

Texto completo da fonte
Resumo:
La capacidad de hacer dosimetría en dos dimensiones es una herramienta para la medicina. En particular, en la terapia de irradiación de cuerpo entero con electrones de alta energía, utilizada para el tratamiento de la micosis fungoide, se debe determinar, de manera adecuada y en un tiempo razonablemente corto, el porcentaje de dosis en profundidad y la distribución de dosis en el plano del tratamiento (80 x 190 cm2), para ello se pueden usar diferentes dosímetros tales como las cámaras de ionización (CI), las películas de tinte radicrómico o radiocrómicas (PTR) y los dosímetros termoluminiscentes (TLD), entre otros. Sin embargo usar CI o TLD, es bastante tardado y requiere de un sistema de control de movimiento para tener mayor precisión, de ahí que la película radiocrómica es una alternativa para medir el campo de radiación ya que cuenta con las características de ser relativamente barata, archiva los datos adquiridos al ser irradiada y es sensible a la radiación.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Cibis, Dominik. "Inkjet-Druckprozess zur Verarbeitung elektrisch funktioneller Tinten /". Düsseldorf : VDI-Verl, 2009. http://d-nb.info/992593638/04.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Blanco, C. Edgar, S. Arturo Kong e G. Oriel Núñez. "Cochinilla del carmín". Tesis, Universidad de Chile, 2005. http://www.repositorio.uchile.cl/handle/2250/113719.

Texto completo da fonte
Resumo:
Tesis para optar al grado de Magíster en Administración
No disponible a texto completo
El proyecto tiene como objetivo crear una empresa de elaboración y comercialización del carmín, colorante natural que es utilizado en la industria alimenticia, cosmética, textil y farmacéutica, y que se obtiene de la crianza de un insecto denominado Cochinilla del Carmín, cuyo hábitat son las plantas de tuna. El propósito del proyecto es satisfacer una demanda creciente, a nivel mundial, de colorantes de origen natural, debido al cuestionamiento en que han caído los colorantes sintéticos debido a los efectos colaterales cancerígenos que provocan, especialmente los de color rojo. Esto ha llevado que la mayor parte de los países más industrializados, y muchos en vías de desarrollo, hayan establecido normas legales que prohíben el uso de colorantes artificiales en beneficio de los naturales. Si se considera que los colorantes sintéticos representan el 90% del total de colorantes consumidos en el mundo, es esperable un crecimiento fuerte en los próximos años para los colorantes naturales. El proyecto participará en este mercado creciente con un producto de alta calidad y con un rendimiento productivo superior y costos inferiores a la competencia, en virtud a un manejo de cultivo de cochinilla asistido por profesionales, aprovechamiento de exenciones tributarias y aduaneras en una zona franca, beneficios otorgados por el país a las exportaciones, y cercanía con los principales proveedores de materia prima. El proceso productivo del proyecto está conformado por 3 fases: Un ciclo agrícola- biológico para obtener los tunales e infestación asistida de cochinilla, un ciclo industrial para producir el carmín, y un ciclo de comercialización internacional para colocar el producto. La primera producción se obtiene al 21º mes y se logra la producción plena al 30º mes. La estrategia comercial se basa en un contacto directo con el cliente objetivo, que corresponden a los mercados de los países con los cuales Chile ha establecido tratados de libre comercio y acuerdos comerciales. El proyecto requiere un financiamiento de US$ 770.000, los que serán financiados en un 60% por los gestores del proyecto y un 40% por un financista externo, bajo la modalidad de una sociedad anónima cerrada. La evaluación económica determina la viabilidad del proyecto con un Valor Presente Neto de US$ 144.000, una Tasa Interna de Retorno de 19,72% y un Período de Recupero de la Inversión de 2,9 años. 6 Las simulaciones arrojan un alto grado de sensibilidad del proyecto ante cambios en el precio del carmín, del insumo cochinilla, y de los volúmenes de tratamiento de la planta. No obstante, el primer factor presenta una estabilidad histórica, y los otros 2 son controlables por el proyecto. En consideración de los antecedentes expuestos, los gestores del proyectos recomiendan su ejecución.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Butzke, Daniel. "APIT, das zytolytische Toxin der Aplysia-punctata-Tinte eine biochemisch-molecularbiologische Charakterisierung und Aufklärung des toxischen Prinzips /". [S.l.] : [s.n.], 2003. http://www.diss.fu-berlin.de/2003/252/index.html.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Illa, Tuset Sílvia. "Molecular modelling of quatsome nanovesicles". Doctoral thesis, Universitat Autònoma de Barcelona, 2019. http://hdl.handle.net/10803/667197.

Texto completo da fonte
Resumo:
This thesis is devoted to the theoretical and computational study at atomistic and molecular scales of the properties of novel organic nanoparticles called “Quatsomes” (vesicles made by mixing CTAB cationic surfactant and cholesterol) as well as the interactions of Quatsomes with different types of fluorescent molecules. The methodology employed is computational molecular modelling. It includes modelling of the interactions between molecules at different scales and resolutions (DFT electronic structure calculations, atomistic molecular mechanics force fields and coarse-grain molecular mechanics force fields) and molecular dynamics simulations at atomistic and coarse-grain molecular resolutions. Most of the results have observable consequences that have been confirmed experimentally. The thesis is divided into an Introduction to the topic (with a brief explanation of the main experimental results and the main theoretical concepts), a chapter describing in detail the methods to be employed in the thesis, four chapters containing new results and a chapter with conclusions and perspectives. The results of the thesis are presented in two parts. The first part (Chapters 3 and 4) contains the results concerning the simulations and calculations of structure and properties of the Quatsome vesicle from atomistic and coarse-grain molecular simulations. The second part (Chapters 5 and 6) contains the simulation study of the interaction of Quatsome vesicles with different types of dyes. The atomistic simulation results presented in Chapter 3 provide a detailed characterization of the properties of the Quatsome bilayer. The molecular organization of the components across the bilayer (positioning, orientation and diffusion of the component molecules) was studied as well as mechanical properties such as bending modulus and area expansion modulus. The effect of temperature and added salt was also analyzed. Remarkably, it was found that the orientation of the molecules has a spontaneous symmetry breaking between the two leaflets of the bilayer and states with different orientations coexist, a theoretical prediction that has been tested experimentally. In Chapter 4 two coarse-grain Martini-type parametrizations of a force field for CTAB surfactant (one for explicit solvent and one for implicit solvent simulations) was developed and successfully tested against atomistic simulations. The model was further employed to perform simulations of full Quatsome vesicles. These simulations revealed that the Quatsome vesicle is made of planar faces linked by curved defects, a kind of vesicle organization never found before. These predictions were confirmed by experimental Cryo-TEM images. Chapters 5 and 6 start by developing (from DFT) CHARMM compatible atomistic force fields for simulation of different dyes (fluorescein in Chapter 4 and DiD and DiI in Chapter 5). These force fields were employed in molecular dynamics simulations of the interactions of these dyes with Quatsomes. The results demonstrate that despite the hydrophilic fluorescein dye interacts strongly with Quatsome (via electrostatic interactions), the adsorption of the dye competes with the more favorable formation of soluble molecular clusters. Hence, a more suitable approach is to employ hydrophobic dyes such as DiI and DiD. The simulations reported in the thesis show that these dyes are integrated in the bilayer without deforming or altering the Quatsome and without aggregating inside the Quatsome bilayer, thus providing suitable alternatives for developing fluorescent vesicles. The conclusions and perspectives section shows that the thesis not only present many new results but also has many possible future perspectives in different directions: vesicles with resonant energy transfer, conceptual aspects regarding the spontaneous self-assembly of vesicles, possibility of replacing the components by other different bilayer components. All these options have been initially explored and all of them are very promising.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "TINTE"

1

Skujin̦š, Zigmunds. Buršana un tinte. Rīga: Atēna, 2003.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Laighin, Pádraig G. Ó. Tinte cnámh ar lasadh. Baile Átha Cliath: Coiscéim, 2012.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

1947-, Landi Sandra, ed. Ritratto a tinte forti. Firenze: Giunti, 1991.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Marinetti, Filippo Tommaso. Novelle colle labbra tinte. Firenze: Vallecchi, 2003.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Hermann, Kinder. Nachts mit Filzstift und Tinte. Eggingen: Edition Klaus Isele, 1988.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Orlić, Valerio. Žig od tinte: Izabrane pjesme. Rijeka: Hrvatsko književno društvo, 2009.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Tinte sionnaigh agus scéalta eile. Indreabhán, Co. na Gaillimhe: Cló Chonamara, 1985.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Carminati, Marco. Altre storie a tinte fosche. Firenze: L'autore libri, 1992.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Kinder, Hermann. Nachts mit Filzstift und Tinte. Eggingen: Edition Isele, 1998.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Rokpelnis, Jānis. Smagi urbjas tinte: Grāmata par Knutu Skujenieku. Rīga: Pētergailis, 2006.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "TINTE"

1

Bährle-Rapp, Marina. "tint (tinted)". In Springer Lexikon Kosmetik und Körperpflege, 558. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_10558.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Fiechter, Benjamin. "Tinte und Blei: Überlegungen zur Wertigkeit von Schreibgeräten". In Phantastik und Skepsis, 313–18. Göttingen: V&R unipress, 2016. http://dx.doi.org/10.14220/9783737005500.313.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Scholz, Leander. "Sklaverei, die unsichtbare Tinte. Buck-Morss liest Hegel". In total., editado por Ulrike Bergermann e Nanna Heidenreich, 91–100. Bielefeld: transcript Verlag, 2014. http://dx.doi.org/10.14361/transcript.9783839427668.91.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

McCulloch, Warren S. "„Was bringt mein Hirn in Tinte zu Papier?“". In Computerkultur, 230–39. Vienna: Springer Vienna, 2000. http://dx.doi.org/10.1007/978-3-7091-6321-4_14.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Michell, Kalani. "Drei (und mehr) Arten, Tinte ans Laufen zu kriegen". In Re-Animationen, 281–310. Köln: Böhlau Verlag, 2012. http://dx.doi.org/10.7788/boehlau.9783412215538.281.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Jahn, Egbert. "„Mit letzter Tinte“: ein Federstich in das Wespennest israelischer, jüdischer und deutscher Empfindlichkeiten". In Politische Streitfragen, 210–27. Wiesbaden: Springer Fachmedien Wiesbaden, 2015. http://dx.doi.org/10.1007/978-3-658-05034-4_11.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Weber, Frank. "Nicht Tinte, sondern Taten zählen – Erfolgreiche Führung bewährt sich im Change Management als Reputation Charger". In Corporate Reputation Management, 193–203. Wiesbaden: Gabler Verlag, 2012. http://dx.doi.org/10.1007/978-3-8349-3720-9_10.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Gooch, Jan W. "Tinge". In Encyclopedic Dictionary of Polymers, 751. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11893.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Gooch, Jan W. "Tinter". In Encyclopedic Dictionary of Polymers, 751. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11896.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Gooch, Jan W. "Tint". In Encyclopedic Dictionary of Polymers, 751. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11895.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "TINTE"

1

Marais, Deon, e Gideon P. Greyvenstein. "Providing Thermal-Hydraulic Boundary Conditions to the Reactor Code TINTE Through a Flownex-TINTE Coupling". In Fourth International Topical Meeting on High Temperature Reactor Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/htr2008-58110.

Texto completo da fonte
Resumo:
TINTE is a well established reactor analysis code which models the transient behaviour of pebble bed reactor cores but it does not include the capabilities to model a power conversion unit (PCU). This raises the issue that TINTE cannot model full system transients. One way to overcome this problem is to supply TINTE with time-dependant thermal-hydraulic boundary conditions which are obtained from PCU simulations. This study investigates a method to provide boundary conditions for the nuclear code TINTE during full system transients. This was accomplished by creating a high level interface between the systems CFD code Flownex and TINTE. An indirect coupling method is explored whereby characteristics of the PCU are matched to characteristics of the nuclear core. This method eliminates the need to iterate between the two codes. A number of transients are simulated using the coupled code and then compared against stand-alone Flownex simulations. The coupling method introduces relatively small errors when reproducing mass flow, temperature and pressure in steady state analysis, but become more pronounced when dealing with fast thermal-hydraulic transients. Decreasing the maximum time step length of TINTE reduces this problem, but increases the computational time.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Ming, Hui, Zhang Xingang e Zhang Meng. "Modeling Broad-band Power Amplifier Using Hybrid Tinte-Delay Neural Network". In 2018 Cross Strait Quad-Regional Radio Science and Wireless Technology Conference (CSQRWC). IEEE, 2018. http://dx.doi.org/10.1109/csqrwc.2018.8455389.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Sikik, Ugur Emre. "Simulations of Air and Water Ingress Transients for the Pebble Bed Modular Reactor (PBMR) by Means of the TINTE Code". In Fourth International Topical Meeting on High Temperature Reactor Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/htr2008-58104.

Texto completo da fonte
Resumo:
In this study several air and water ingress scenarios for the PBMR [1] were simulated by means of the dynamic reactor code TINTE (TIme-dependent Neutronics and TEmperatures) [2]. The Power Conversion Unit (PCU) and other sub-systems cannot be modelled with the TINTE code and therefore air ingress rates were obtained from Computational Fluid Dynamics (CFD) analysis performed by utilizing the FLUENT code [3]. The use of the TINTE code was previously validated with simulations of the NACOK corrosion experiments [4], [5], [6]. The validations were performed at Forschungszentrum Juelich, however the results are not yet published. The rates of chemical reactions between graphite and gases like O2, CO2, H2O and H2 are negligible below 400°C. Air and water ingress into the PBMR core at high temperatures can result in corrosion of the PBMR fuel spheres and a possible increase in the fission product release rate. The air ingress scenarios included in this study are; a break in the core outlet pipe at the turbine inlet location, which results in air ingress from the outlet plenum, and a break in a pipe that is connected to the top of the Reactor Pressure Vessel (RPV), which results in air ingress from top of the core. For both transients it is assumed that a Depressurized Loss of Forced Cooling (DLOFC) event takes place prior to the air ingress. The DLOFC leads to high fuel and reflector temperatures that allow higher oxidation rates. The results show that the oxidation of graphite structures in the core is more severe in the case of the outlet pipe break transient. A break in the Core Conditioning System (CCS) heat exchanger circuit during a maintenance mode or following a reactor trip could result in water ingress of up to 1000 kg into the core (the primary system is depressurized at this stage). During the water ingress the CCS continuously cools down the core. Due to the low water ingress rate and lower fuel temperatures, the water ingress transient is not as severe as the air ingress transients.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Matev, Alex. "Simulation of the Operation in Passive Mode of Reactor Cavity Cooling System of High-Temperature Gas-Cooled Reactor". In 16th International Conference on Nuclear Engineering. ASMEDC, 2008. http://dx.doi.org/10.1115/icone16-48935.

Texto completo da fonte
Resumo:
The Reactor Cavity Cooling System (RCCS) of a High-Temperature Gas-Cooled Reactor (HTGR) may be required to operate in a “passive” mode when heat is removed from the reactor cavity by letting RCCS water inventory to boil off to atmosphere. Overheating of the reactor cavity concrete walls may lead to a failure of the reactor vessel support structures and its shift off the design position. Dislocation of the massive reactor vessel may cause multiple ruptures of pipes, connected to both the upper and lower vessel heads. Such breaks of the reactor pressure boundary will enable air ingress into the core, fuel oxidation and overheating, and possible release of fission products into the environment. The computer code TINTE [3] was used to simulate a “Depressurized Loss Of Flow Circulation (DLOFC) Without Reactor Scram” accident and determine from its results the magnitude, axial distribution, and time dependence of the heat flux on the RCCS cooling panels. The computer code RELAP [4] was used to model the operation in “passive” mode of one RCCS train, consisting of a tank and four standpipes. This paper describes the application of both RELAP and TINTE for the simulation of RCCS operation in passive mode. The main conclusion from this analysis is that the proposed way of using both codes is suitable to perform scoping studies and design evaluation of RCCS of a pebble-bed HTGR.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Zheng, Yanhua, e Lei Shi. "Reactivity Accident Due to Control Rod Inadvertent Withdrawal of the 250MW High Temperature Gas-Cooled Reactor". In 18th International Conference on Nuclear Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/icone18-29038.

Texto completo da fonte
Resumo:
Reactivity accident due to inadvertent withdrawal of the control rod is one kind of the design basis accident for high temperature gas-cooled reactors, which should be analyzed carefully in order to validate the reactor inherent safety properties. Based on the preliminary design of the Chinese Pebble-bed Modular High Temperature Gas-cooled Reactor (HTR-PM) with single module power of 250MW, several cases of reactivity accident has been studied by the help of the software TINTE in the paper, e.g., the first scram signal works or not, the absorber balls (secondary shutdown units) drop or not, and the ATWS situation is also taken into account. The dynamic processes of the important parameters including reactor power, fuel temperature and Xenon concentration are studied and compared in detail between these different cases. The calculating results show that, the decay heat during the reactivity accidents can be removed from the reactor core solely by means of physical processes in a passive way, so that the temperature limits of fuel element and other components are still obeyed, which can effectively keep the integrality of the fuel particles to avoid massive fission products release. This will be helpful to the further detail design of the HTR-PM demonstrating power plant project.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Zhengy, Yanhua, e Lei Shi. "Characteristics of the 250MW Pebble-Bed Modular High Temperature Gas-Cooled Reactor in Depressurized Loss of Coolant Accidents". In Fourth International Topical Meeting on High Temperature Reactor Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/htr2008-58299.

Texto completo da fonte
Resumo:
Depressurized loss of coolant accident (DLOCA) is one of the most important design basis accidents for high temperature gas-cooled reactors. Analysis of the reactor characteristic behavior during DLOCA can provide useful reference to the physics, thermo-hydraulic and structure designs of the reactor core. In this paper, according to the preliminary design of the 250MW Pebble-bed Modular High Temperature Gas-cooled Reactor (HTR-PM), three cases of DLOCA: a instantaneous depressurization along with a flow coastdown and scram at zero time, a main pipe with a diameter of 65mm rupture, and a instrument pipe with a diameter of 10mm broken, are studied by the help of two different kinds of software THERMIX and TINTE. The key parameters of different cases including reactor power, temperature distribution of the core and pressure vessel, and the decay power removal by the passive residual heat remove system (RHRS) are compared in detail. Some uncertainties, such as residual heat calculation, power distribution, heat conductivity of fuel element, etc., are analyzed in order to evaluate the safety margin of the maximum fuel temperature during DLOCA. The calculating results show that, the decay heat in the DLOCA can be removed from the reactor core solely by means of physical processes in a passive way, so that the temperature limits of fuel and components are still obeyed. It also illustrates that the HTR-PM can reach 250MW reactor power per unit and still can keep the inherent safety.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Luo, Chen, Zhengzhang Chen, Lu-An Tang, Anshumali Shrivastava, Zhichun Li, Haifeng Chen e Jieping Ye. "TINET". In KDD '18: The 24th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining. New York, NY, USA: ACM, 2018. http://dx.doi.org/10.1145/3219819.3220003.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Yanhua, Zheng, e Shi Lei. "Water-Ingress Accident of the 250MW Pebble-Bed Modular High Temperature Gas-Cooled Reactor". In 17th International Conference on Nuclear Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/icone17-75078.

Texto completo da fonte
Resumo:
Water-ingress accident, caused by the steam generator heating tube rupture of a high temperature gas-cooled reactor, will introduce a positive reactivity to lead the nuclear power increase rapidly, as well as the chemical reaction of graphite fuel elements and reflector structure material with steam. Increase of the primary circuit pressure may result in the opening of the safety valve, which will cause the release of radioactive isotopes and flammable water gas. The analysis of such an important and particular accident is significant for verifying the inherent safety characteristics of the pebble-bed modular high temperature gas-cooled reactor. Based on the preliminary design of the 250MW Pebble-bed Modular High Temperature Gas-cooled Reactor (HTR-PM), the design basis accident of double-ended guillotine break of a heating tube has been analyzed by using TINTE, which is a special transient analysis program for high temperature gas-cooled reactors. Some safety relevant concerns, such as the fuel temperature and primary loop pressure, the graphite corrosion inventory, the water gas releasing amount, as well as the natural convection influence under the condition of the failure of the blower flaps shut down, have been studied in detail. The calculation result of the design basis accident indicates that, the maximal possible water ingress amount is less than 600 kg and the maximal fuel temperature keeps far below the design limitation of 1620°C. The result also shows that the slight amount of graphite corrosion will not damage the reactor structure and the fuel element, and there is no potential explosive risk caused by the opening of the safety valve.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Rukundo, O., e E. Toth. "TINTED CAPSULE ENDOSCOPY". In ESGE Days 2018 accepted abstracts. Georg Thieme Verlag KG, 2018. http://dx.doi.org/10.1055/s-0038-1637480.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Salvador, Francisca Emanuella, Myrella Barbosa Dantas Gico e Rodrigo dos Santos Souza. "EXPOSIÇÃO FIO TINTO: DESIGN NA COMPANHIA DE TECIDOS RIO TINTO". In Arte e Transmidiações - Anais do 3º Congresso Intersaberes em Arte, Museus e Inclusão; III Encontro Regional da ANPAP Nordeste e 8ª Bienal Internacional de Arte Postal. Recife, Brasil: Even3, 2020. http://dx.doi.org/10.29327/125233.1-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "TINTE"

1

Taheri, Bahman, Peter Palffy-Muhoray, Tamas Kosa e David L. Post. Technology for Electronically Varying Helmet-Visor Tint. Fort Belvoir, VA: Defense Technical Information Center, janeiro de 2000. http://dx.doi.org/10.21236/ada430778.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

McKinley, George B. Vehicle Capacity API for Transportation Infrastructure Network Builder (TINet). Fort Belvoir, VA: Defense Technical Information Center, setembro de 2004. http://dx.doi.org/10.21236/ada427994.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Gweon, G. H., J. W. Allen, Y. Zhang, R. Claessen, W. P. Ellis, Z. X. Shen e A. Matsurra. Angle resolved photoemission on K{sub 0.3}MoO{sub 3}, TiTe{sub 2} and Ti{sub 1+x}S{sub 2}. Office of Scientific and Technical Information (OSTI), setembro de 1994. http://dx.doi.org/10.2172/10179544.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Fallas, K. M., e T. D. Finley. A GIS dataset of geological features from mineral exploration of the Gayna River Property by Rio Tinto Canadian Exploration Ltd., 1975-1976, northern Mackenzie Mountains, Northwest Territories. Natural Resources Canada/CMSS/Information Management, 2021. http://dx.doi.org/10.4095/328243.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

SNAP-TITE Composite Column Reinforcement. Purdue University, 2007. http://dx.doi.org/10.5703/1288284315729.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

50 tinten groen : Naar een gemeenschappelijke beleidsstrategie voor groene infrastructuur. Instituut voor Natuur- en Bosonderzoek, 2016. http://dx.doi.org/10.21436/inbor.12342848.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "TINTE":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia