Literatura científica selecionada sobre o tema "Thermal and Thermokinetic Characterization"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Thermal and Thermokinetic Characterization".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Thermal and Thermokinetic Characterization"
Erişkin, Selinay Y., Fatma Ç. Telli, Yeliz Yıldırım e Yeşim Salman. "Synthesis, Characterization, and Thermokinetic Analysis of New Epoxy Sugar Derivative". Journal of Chemistry 2014 (2014): 1–6. http://dx.doi.org/10.1155/2014/737953.
Texto completo da fonteAl-Maydama, Hussein, Tajedin Yahya Al-Ansi, Yasmin M. S. Jamil e A. H. Ali. "Biheterocyclic ligands: synthesis, characterization and coordinating properties of bis(4-amino-5-mercapto-1,2,4-triazol-3-yl) alkanes with transition metal ions and their thermokinetic and biological studies". Ecletica Quimica 33, n.º 3 (29 de setembro de 2008): 29–42. http://dx.doi.org/10.26850/1678-4618eqj.v33.3.2008.p29-42.
Texto completo da fonteAversa, Raffaella, Laura Ricciotti, Valeria Perrotta e Antonio Apicella. "Thermokinetic and Chemorheology of the Geopolymerization of an Alumina-Rich Alkaline-Activated Metakaolin in Isothermal and Dynamic Thermal Scans". Polymers 16, n.º 2 (11 de janeiro de 2024): 211. http://dx.doi.org/10.3390/polym16020211.
Texto completo da fontePaglia, L., V. Genova, M. P. Bracciale, C. Bartuli, F. Marra, M. Natali e G. Pulci. "Thermochemical characterization of polybenzimidazole with and without nano-ZrO2 for ablative materials application". Journal of Thermal Analysis and Calorimetry 142, n.º 5 (28 de outubro de 2020): 2149–61. http://dx.doi.org/10.1007/s10973-020-10343-4.
Texto completo da fontePetrova-Burkina, O. A., V. V. Rubanik Jr. e V. V. Rubanik. "Thermokinetic EMF during a reverse phase transition in titanium nickelide as a way of information recording". Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 66, n.º 3 (12 de outubro de 2021): 329–34. http://dx.doi.org/10.29235/1561-8358-2021-66-3-329-334.
Texto completo da fontePetrova-Burkina, O. A., V. V. Rubanik, Jr., V. V. Rubanik e T. V. Gamzeleva. "Influence of heat treatment on thermokinetic EMF during reverse phase transition in titanium nickelide". Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 65, n.º 4 (31 de dezembro de 2020): 413–21. http://dx.doi.org/10.29235/1561-8358-2020-65-4-413-421.
Texto completo da fontePetrova-Burkina, O. A., V. V. Rubanik, Jr., V. V. Rubanik e T. V. Gamzeleva. "Influence of heat treatment on thermokinetic EMF during reverse phase transition in titanium nickelide". Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 65, n.º 4 (31 de dezembro de 2020): 413–21. http://dx.doi.org/10.29235/1561-8358-2020-65-4-413-421.
Texto completo da fonteStrobel, Hans. "Thermokinetic compartment models of thermal decomposition reactions". Thermochimica Acta 112, n.º 2 (março de 1987): 179–86. http://dx.doi.org/10.1016/0040-6031(87)88275-8.
Texto completo da fonteMuravyev, Nikita V., Giorgio Luciano, Heitor Luiz Ornaghi, Roman Svoboda e Sergey Vyazovkin. "Artificial Neural Networks for Pyrolysis, Thermal Analysis, and Thermokinetic Studies: The Status Quo". Molecules 26, n.º 12 (18 de junho de 2021): 3727. http://dx.doi.org/10.3390/molecules26123727.
Texto completo da fonteDelgado R, E. J. "A Thermal Engine Driven by a Thermokinetic Oscillator". Journal of Physical Chemistry 100, n.º 26 (janeiro de 1996): 11144–47. http://dx.doi.org/10.1021/jp9514234.
Texto completo da fonteTeses / dissertações sobre o assunto "Thermal and Thermokinetic Characterization"
Flity, Hassan. "Modélisation de la dégradation et combustion du bois de construction". Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0250.
Texto completo da fonteThe use of wood in construction offers numerous advantages, but also poses fire safety risks. Several studies available in the literature, whether experimental or numerical, have investigated the fire behavior of wood. However, the diverse and varied results do not allow the identification of the intrinsic behavior of wood, and regulatory frameworks have to rely on numerous simplifying assumptions. The objective of this thesis is to study the thermal degradation of wood at the cone calorimeter scale. The uniqueness of the study lies in the adoption of an increasingly complex approach, the use of meticulous metrology, and the most comprehensive characterization of the properties of the wood samples under investigation. Degradation involves numerous interacting processes such as drying, pyrolysis, and combustion with or without flames, resulting in heat and mass transfer. Given the complexity of studying all these phenomena simultaneously, the strategy adopted was to separate the different phenomena as much as possible through models and specific experiments. In order to overcome the problem of drying and hydric transfer, all the work was carried out on dry wood. First, specific characterization methods were used to determine the thermal properties of wood and charcoal. These experiments helped to establish behavioral laws for some of these properties, facilitating their integration into a model. Subsequently, an experimental campaign was conducted at the material scale of wood using techniques such as thermogravimetric analysis and differential scanning calorimetry under an inert atmosphere. At this scale, wood is thermally thin, which allowed the development of a kinetic model capable of predicting mass loss, mass loss rate, and heat absorbed or generated by wood during pyrolysis as a function of temperature. Next, an experimental campaign was carried out on wood samples at the scale of the cone calorimeter in an inert atmosphere to validate the 3D pyrolysis model developed to predict wood pyrolysis in the absence of combustion, driven primarily by heat transfer within the material. Finally, tests in an air environment were conducted for a comprehensive modeling of dry wood combustion, which requires a precise characterization of char combustion, the associated heat generated, and the heat flux supplied by the flame
De, Indrayush. "Thermal characterization of nanostructures using scanning thermal microscopy". Thesis, Bordeaux, 2017. http://www.theses.fr/2017BORD0563/document.
Texto completo da fonteThe objective of this thesis is to master quantitative aspects when using nearfield thermal microscopy by using the scanning thermal microscopy technique (SThM). We start by taking an in-depth look into the work performed previously by other scientist and research organizations. From there, we understand the progress the SThM probes have made through the decades, understand the probe sensitivity to the range of conductivity of the materials under investigation, verify the resistances encountered when the probe comes in contact with the sampl and the applications of SThM.Then we look into the equipment necessary for performing tests to characterize material thermal properties. The SThM we use is based on atomic force microscope (AFM) with a thermal probe attached at the end. The AFM is described in this work along with the probes we have utilized.For the purpose of our work, we are only using thermoresistive probes that play the role of the heater and the thermometer. These probes allow us to obtain sample temperature and thermalconductivity. We use two different types of thermal probes – 2-point probe and 4-point probe with SiO2 or with Si3N4 cantilever. Both the probes are very similar when it comes to functioning with the major difference being that the 4-point probe doesn’t have current limiters. Then, we present the use of recent heat-resistive probes allowing to reach a spatial resolution of the orde rof 100 nm under atmosphere and of 30 nm under vacuum. These probes can be used in passive mode for measuring the temperature at the surface of a material or component and in activemode for the determination of the thermal properties of these systems. Using thermoresistive probes means that no specialized devices are necessary for operation. Using simple commercialsolutions like simple AC or DC current and Wheatstone bridge are sufficient to provide basic thermal images. In our case we have also utilized other industrial devices and a home madeSThM setup to further improve the quality of measurement and accuracy. All the elements of the experimental setup have been connected using GPIB and that have been remotely controlled from a computer using a code developed under Python language. This code allows to make the frequency dependent measurement as well as the probe calibration. [...]
Li, Yifan Li. "NANOSCALE THERMAL CHARACTERIZATION BY SCANNING THERMAL MICROSCOPY (STHM)". University of Akron / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=akron159057422807603.
Texto completo da fonteShope, David Allen 1958. "Thermal characterization of VLSI packaging". Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276686.
Texto completo da fonteCrain, Kevin Richard. "Mechanical characterization and thermal modeling of a MEMS thermal switch". Online access for everyone, 2005. http://www.dissertations.wsu.edu/Thesis/Fall2005/k%5Fcrain%5F120905.pdf.
Texto completo da fonteFerrando, Villalba Pablo. "Thermal characterization of Si-based nanostructures". Doctoral thesis, Universitat Autònoma de Barcelona, 2016. http://hdl.handle.net/10803/399339.
Texto completo da fonteThermoelectricity is a promising technology for scavenging energy from environmental temperature differences. The development of materials that transform heat into electricity in a more efficient way making use of this principle is necessary for opening new application niches. Nanostructuring a material has been demonstrated to increase the thermoelectric figure of merit of crystalline materials via a thermal conductivity reduction driven by enhanced phonon scattering. This thesis is committed to give a better insight into the processes that affect thermal transport in potential Si-based nanomaterials for thermoelectric generation. In Chapter 1, a general introduction exposes the need for reducing fossil fuel consumption and generally using renewable energies. Also, the benefit of tuning the thermal conductivity of materials for thermal management applications is discussed. Chapter 2 provides an overview of the theory behind thermal transport. First, the heat equation is derived from the classical irreversible thermodynamics framework. Then, phonons are introduced as heat carrying quasiparticles. The application of the Boltzmann Transport Equation to both phonons and electrons allows understanding the effect of different scattering mechanisms on the thermoelectric properties of materials. Finally, several strategies for enhancing the figure of merit of materials are reviewed. In Chapter 3, the necessary tools for measuring the thermal conductivity of nanomaterials are developed. Two cryostats are set up along with the temperature control systems that allow measuring at stable temperatures. Later, three sensors are developed for measuring the thermal conductivity of different materials. First, suspended structures intended for measuring the in-plane thermal conductivity of suspended membranes and nanowires are fabricated, and the errors and uncertainties produced in such measurements are characterized. Second, the 3ω method is introduced, allowing the measurement of the out-of-plane thermal conductivity in thin films. The emergence of the 3ω voltage is demonstrated, and the relation between this voltage and the thermal conductivity of the substrate and the thin-film is found. Finally, a sensor for the 3ω-Völklein method is developed, which allows characterizing the in-plane thermal conductivity of thin-films during the layer growth. In Chapter 4, the thermal conductivity of suspended Si membranes is measured, finding the expected reduction in thermal conductivity due to phonon surface scattering, as well as confinement effects in the 17.5 nm thick membrane. Moreover, the nanopatterning of these Si membranes with focused ion beam (FIB) is optimized through a systematic study of its amorphization finding an optimal spatial resolution of 200 nm when using 50 μC/cm2. In Chapter 5, the thermal conductivity of porous Si nanowires is studied for wires with different porosity, length and diameters, showing an unexpected dependence on its diameter that suggests that the wire core is generally less porous than the shell. The structural Si thermal conductivity is found to be one fiftieth of that of the bulk, promising a good thermoelectric figure of merit. In Chapter 6, the thermal conductivity of a novel SiGe graded superlattice is measured, showing a considerable reduction in its thermal conductivity, even below the thin-film alloy limit. The measurement of the thickest superlattice confirms the absence of coherent phonon effects. In Chapter 7, the thermal conductance of a suspended SiNx membrane is measured with a high precision while depositing on it organic (TPD) and metallic (Indium) materials. The results show an initial conductance reduction that cannot be explained with the Fourier law. This reduction is found to be related to an increased diffusive boundary scattering, which could be easily extrapolated to other thermoelectric nanomaterials, reducing their thermal conductivity. Also, the growth dynamics of both materials are characterized through their signal in the conductance.
Mutnuri, Bhyrav. "Thermal conductivity characterization of composite materials". Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4468.
Texto completo da fonteTitle from document title page. Document formatted into pages; contains vii, 62 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 61-62).
Wei, Xiaohao, e 魏晓浩. "Nanofluids: synthesis, characterization and thermal conductivity". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hub.hku.hk/bib/B44765861.
Texto completo da fonteHanuska, Alexander Robert Jr. "Thermal Characterization of Complex Aerospace Structures". Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36617.
Texto completo da fonteMaster of Science
VanDerheyden, Andrew Louis. "Characterization of thermal coupling in chip multiprocessors". Thesis, Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51892.
Texto completo da fonteLivros sobre o assunto "Thermal and Thermokinetic Characterization"
A, Turi Edith, ed. Thermal characterization of polymeric materials. 2a ed. San Diego: Academic Press, 1997.
Encontre o texto completo da fonteA, Turi Edith, ed. Thermal characterization of polymeric materials. 2a ed. San Diego: Academic Press, 1997.
Encontre o texto completo da fonteA, Watring D., e United States. National Aeronautics and Space Administration., eds. Thermal characterization of the universal multizone crystallizator. [Washington, DC: National Aeronautics and Space Administration, 1995.
Encontre o texto completo da fonteJacobs, Pieter A. Thermal infrared characterization of ground targets and backgrounds. Bellingham, Wash., USA: SPIE Optical Engineering Press, 1996.
Encontre o texto completo da fonteCenter, Langley Research, ed. Thermal characterization and toughness of ethynyl containing blends. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
Encontre o texto completo da fonteThermal infrared characterization of ground targets and backgrounds. 2a ed. Bellingham, WA: SPIE, The International Society for Optical Engineering, 2005.
Encontre o texto completo da fonteJacobs, Pieter A. Thermal infrared characterization of ground targets and backgrounds. 2a ed. Bellingham, Wash: SPIE Press, 2006.
Encontre o texto completo da fonteT, Riga Alan, e Judovits Lawrence 1955-, eds. Materials characterization by dynamic and modulated thermal analytical techniques. West Conshohocken, PA: ASTM, 2001.
Encontre o texto completo da fonteT, Riga Alan, Neag C. Michael e ASTM Committee E-37 on Thermal Measurements., eds. Materials characterization by thermomechanical analysis. Philadelphia, PA: ASTM, 1991.
Encontre o texto completo da fonteRiga, AT, e L. Judovits, eds. Materials Characterization by Dynamic and Modulated Thermal Analytical Techniques. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2001. http://dx.doi.org/10.1520/stp1402-eb.
Texto completo da fonteCapítulos de livros sobre o assunto "Thermal and Thermokinetic Characterization"
Moura Neto, Francisco Duarte, e Antônio José da Silva Neto. "Thermal Characterization". In An Introduction to Inverse Problems with Applications, 129–39. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-32557-1_7.
Texto completo da fonteAuroux, A. "Thermal Methods: Calorimetry, Differential Thermal Analysis, and Thermogravimetry". In Catalyst Characterization, 611–50. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4757-9589-9_22.
Texto completo da fonteNaranjo, Alberto, María del Pilar Noriega E., Tim A. Osswald, Alejandro Roldán-Alzate e Juan Diego Sierra. "Thermal Properties". In Plastics Testing and Characterization, 75–126. München: Carl Hanser Verlag GmbH & Co. KG, 2008. http://dx.doi.org/10.3139/9783446418530.004.
Texto completo da fonteYang, Rui. "Thermal Analysis". In Analytical Methods for Polymer Characterization, 203–28. Boca Raton : CRC Press, 2018.: CRC Press, 2018. http://dx.doi.org/10.1201/9781351213158-6.
Texto completo da fontePriyadarshini, Rajashri. "Thermal Characterization of Composites". In Composite Materials, 149–54. First edition. | Boca Raton, FL : CRC Press, 2021.: CRC Press, 2020. http://dx.doi.org/10.1201/9781003080633-7.
Texto completo da fonteBucur, Voichita. "Thermal Imaging". In Nondestructive Characterization and Imaging of Wood, 75–123. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-08986-6_3.
Texto completo da fonteVavilov, Vladimir, e Douglas Burleigh. "Defect Characterization". In Infrared Thermography and Thermal Nondestructive Testing, 181–210. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48002-8_5.
Texto completo da fonteSun, J. G. "Thermal Imaging Characterization of Thermal Barrier Coatings". In Advanced Ceramic Coatings and Interfaces II, 53–60. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470339510.ch6.
Texto completo da fonteBertolotti, M., R. Li Voti, G. Liakhou, C. Sibilia, A. Montenero e G. Gnappi. "Thermal Characterization of Low Thermal Diffusivity Glasses". In Photoacoustic and Photothermal Phenomena III, 217–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-540-47269-8_55.
Texto completo da fonteHassan, Rubia, e Kantesh Balani. "Powder Characterization and Synthesis". In Fundamentals of Thermal Spraying, 131–63. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003321965-6.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Thermal and Thermokinetic Characterization"
Carre, P., e D. Delaunay. "Simultaneous Measurement of the Thermal Properties of Phase-Change Material and Complex Liquids Using a Nonlinear Thermokinetic Model". In Advanced Course in Measurement Techniques in Heat and MassTransfer. Connecticut: Begellhouse, 1985. http://dx.doi.org/10.1615/ichmt.1985.advcoursemeastechheatmasstransf.210.
Texto completo da fonteJonsmann, Jacques, e Siebe Bouwstra. "Thermal microactuator characterization". In Design, Test, and Microfabrication of MEMS/MOEMS, editado por Bernard Courtois, Selden B. Crary, Wolfgang Ehrfeld, Hiroyuki Fujita, Jean Michel Karam e Karen W. Markus. SPIE, 1999. http://dx.doi.org/10.1117/12.341175.
Texto completo da fonteHoffmann, F. M., e R. A. dePaola. "High Resolution Electron Energy Loss Spectroscopy of Molecular Bond Weakening on Potassium Promoted Ru(001)". In Microphysics of Surfaces, Beams, and Adsorbates. Washington, D.C.: Optica Publishing Group, 1985. http://dx.doi.org/10.1364/msba.1985.mc4.
Texto completo da fonteFullem, T. Z., D. F. Rae, A. Sharma, J. A. Wolcott e E. J. Cotts. "Thermal characterization of thermal interface material bondlines". In 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (I-THERM). IEEE, 2008. http://dx.doi.org/10.1109/itherm.2008.4544268.
Texto completo da fonteOlson, Brandon, e Harikishin Bakhtiani. "Thermal Characterization of Emisshield". In 45th AIAA Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2007. http://dx.doi.org/10.2514/6.2007-417.
Texto completo da fonteSarkany, Zoltan, Gabor Farkas e Marta Rencz. "Thermal characterization of capacitors". In 2016 International Conference on Electronics Packaging (ICEP). IEEE, 2016. http://dx.doi.org/10.1109/icep.2016.7486811.
Texto completo da fonteMeyendorf, N. "Acousto-Thermal Microstructure Characterization". In REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION:Volume 22. AIP, 2003. http://dx.doi.org/10.1063/1.1570180.
Texto completo da fonteAlysson, Silvestre, e Cícero da Rocha Souto. "Development and characterization of an experimental thermal cycling platform for thermal characterization". In XI Congresso Nacional de Engenharia Mecânica - CONEM 2022. ABCM, 2022. http://dx.doi.org/10.26678/abcm.conem2022.con22-0259.
Texto completo da fonteZhang, Shu, Yizhang Yang, Katayun Barmak, Yoed Rabin e Mehdi Asheghi. "MEMS Based High Sensitivity Calorimetry". In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-62332.
Texto completo da fonteSingh, Y., N. Bajaj e G. Subbarayan. "Simultaneous thermal/flow characterization of thermal interface materials". In 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, 2016. http://dx.doi.org/10.1109/itherm.2016.7517707.
Texto completo da fonteRelatórios de organizações sobre o assunto "Thermal and Thermokinetic Characterization"
Bennett, G., M. Thompson, T. Larkin e J. Hedstrom. Rf transistor thermal/electrical characterization. Office of Scientific and Technical Information (OSTI), setembro de 1989. http://dx.doi.org/10.2172/5413222.
Texto completo da fonteZemelka, Cole, Bartlomiej Benedikt e Philip Schembri. SX358 Foam Characterization: Thermal Conductivity. Office of Scientific and Technical Information (OSTI), novembro de 2023. http://dx.doi.org/10.2172/2217473.
Texto completo da fonteBoswell, Robert. Thermal Characterization of Two Epoxy Systems. Fort Belvoir, VA: Defense Technical Information Center, agosto de 1999. http://dx.doi.org/10.21236/ada368621.
Texto completo da fonteToni Y. Gutknecht e Guy L. Fredrickson. Thermal Characterization of Molten Salt Systems. Office of Scientific and Technical Information (OSTI), setembro de 2011. http://dx.doi.org/10.2172/1035899.
Texto completo da fonteWillis, Elisha Cade. Thermal characterization of commercial HDPE and UHMWPE. Office of Scientific and Technical Information (OSTI), setembro de 2018. http://dx.doi.org/10.2172/1469514.
Texto completo da fonteFeldman, M. R. Furnace characterization for horizontal shipping container thermal testing. Office of Scientific and Technical Information (OSTI), maio de 1994. http://dx.doi.org/10.2172/10156477.
Texto completo da fonteHemrick, James Gordon, Edgar Lara-Curzio e James King. Characterization of Min-K TE-1400 Thermal Insulation. Office of Scientific and Technical Information (OSTI), julho de 2008. http://dx.doi.org/10.2172/935368.
Texto completo da fonteKlett, J. W. Characterization of ORNL's High Thermal Conductivity Graphite Foam. Office of Scientific and Technical Information (OSTI), janeiro de 2001. http://dx.doi.org/10.2172/777659.
Texto completo da fonteGomez-Vasquez, Sylvia, Alexander L. Brown, Joshua A. Hubbard, Ciro J. Ramirez e Amanda B. Dodd. Carbon fiber composite characterization in adverse thermal environments. Office of Scientific and Technical Information (OSTI), maio de 2011. http://dx.doi.org/10.2172/1029768.
Texto completo da fonteHowe, David J., e Brian Morgan. Thermal Characterization of Thin Films for MEMS Applications. Fort Belvoir, VA: Defense Technical Information Center, fevereiro de 2008. http://dx.doi.org/10.21236/ada478544.
Texto completo da fonte