Literatura científica selecionada sobre o tema "Thermal and optical stress"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Thermal and optical stress".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Thermal and optical stress"
Shiue, Sham-Tsong, e Wen-Hao Lee. "Thermal stresses in carbon-coated optical fibers at low temperature". Journal of Materials Research 12, n.º 9 (setembro de 1997): 2493–98. http://dx.doi.org/10.1557/jmr.1997.0329.
Texto completo da fonteHIGUCHI, Masaya, e Koji SHIMIZU. "Evaluation of thermal stress by optical interferometric method". Proceedings of Autumn Conference of Tohoku Branch 2004.40 (2004): 49–50. http://dx.doi.org/10.1299/jsmetohoku.2004.40.49.
Texto completo da fonteEvans, K. E. "Thermal stress mechanisms in optical storage thin films". Journal of Applied Physics 63, n.º 10 (15 de maio de 1988): 4946–50. http://dx.doi.org/10.1063/1.340438.
Texto completo da fonteHuang, Cai Hua, Xiao Hua Sun, Yi Hua Sun e Jun Zou. "Thermal Effects Caused by Inclusions in Optical Films Irradiated by CW Laser". Advanced Materials Research 634-638 (janeiro de 2013): 2609–12. http://dx.doi.org/10.4028/www.scientific.net/amr.634-638.2609.
Texto completo da fonteHu, Fu Kai, De Jian Zhou e Lei Cheng. "Research and Design of Optical-Fiber-Embedded Structure in Optical Printed Circuit Board under Thermal Shock". Advanced Materials Research 763 (setembro de 2013): 238–41. http://dx.doi.org/10.4028/www.scientific.net/amr.763.238.
Texto completo da fonteLiu, Yueai, B. M. A. Rahman e K. T. V. Grattan. "Thermal-stress-induced birefringence in bow-tie optical fibers". Applied Optics 33, n.º 24 (20 de agosto de 1994): 5611. http://dx.doi.org/10.1364/ao.33.005611.
Texto completo da fonteWong, D. "Thermal stability of intrinsic stress birefringence in optical fibers". Journal of Lightwave Technology 8, n.º 11 (1990): 1757–61. http://dx.doi.org/10.1109/50.60576.
Texto completo da fonteGao, You Tang, Shuo Liu e Yuan Xu. "Analysis of Thermal Shock and Stress with Infrared Optical Domes". Applied Mechanics and Materials 325-326 (junho de 2013): 332–35. http://dx.doi.org/10.4028/www.scientific.net/amm.325-326.332.
Texto completo da fonteLee, Kyoungho, e Joong Seok Lee. "Optimal Design of the Flexure Mount for Optical Mirror Using Topology Optimization Considering Thermal Stress Constraint". Journal of the Korea Institute of Military Science and Technology 25, n.º 6 (5 de dezembro de 2022): 561–71. http://dx.doi.org/10.9766/kimst.2022.25.6.561.
Texto completo da fonteChen, Tei-Chen, Ching-Jiung Chu, Chang-Hsien Ho, Chung-Chen Wu e Cheng-Chung Lee. "Determination of stress-optical and thermal-optical coefficients of Nb2O5 thin film material". Journal of Applied Physics 101, n.º 4 (15 de fevereiro de 2007): 043513. http://dx.doi.org/10.1063/1.2435796.
Texto completo da fonteTeses / dissertações sobre o assunto "Thermal and optical stress"
Kylner, Carina. "Light scattering for analysis of thermal stress induced deformation in thin metal films". Doctoral thesis, KTH, Fysik, 1997. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-2547.
Texto completo da fonteNR 20140805
Amazirh, Abdelhakim. "Monitoring crops water needs at high spatio-temporal resolution by synergy of optical/thermal and radar observations". Thesis, Toulouse 3, 2019. http://www.theses.fr/2019TOU30101.
Texto completo da fonteOptimizing water management in agriculture is essential over semi-arid areas in order to preserve water resources which are already low and erratic due to human actions and climate change. This thesis aims to use the synergy of multispectral remote sensing observations (radar, optical and thermal data) for high spatio-temporal resolution monitoring of crops water needs. In this context, different approaches using various sensors (Landsat-7/8, Sentinel-1 and MODIS) have been developed to provide information on the crop Soil Moisture (SM) and water stress at a spatio-temporal scale relevant to irrigation management. This work fits well the REC "Root zone soil moisture Estimates at the daily and agricultural parcel scales for Crop irrigation management and water use impact: a multi-sensor remote sensing approach" (http://rec.isardsat.com/) project objectives, which aim to estimate the Root Zone Soil Moisture (RZSM) for optimizing the management of irrigation water. Innovative and promising approaches are set up to estimate evapotranspiration (ET), RZSM, land surface temperature (LST) and vegetation water stress through SM indices derived from multispectral observations with high spatio-temporal resolution. The proposed methodologies rely on image-based methods, radiative transfer modelling and water and energy balance modelling and are applied in a semi-arid climate region (central Morocco). In the frame of my PhD thesis, three axes have been investigated. In the first axis, a Landsat LST-derived RZSM index is used to estimate the ET over wheat parcels and bare soil. The ET modelling estimation is explored using a modified Penman-Monteith equation obtained by introducing a simple empirical relationship between surface resistance (rc) and a RZSM index. The later is estimated from Landsat-derived land surface temperature (LST) combined with the LST endmembers (in wet and dry conditions) simulated by a surface energy balance model driven by meteorological forcing and Landsat-derived fractional vegetation cover. The investigated method is calibrated and validated over two wheat parcels located in the same area near Marrakech City in Morocco. In the next axis, a method to retrieve near surface (0-5 cm) SM at high spatial and temporal resolution is developed from a synergy between radar (Sentinel-1) and thermal (Landsat) data and by using a soil energy balance model. The developed approach is validated over bare soil agricultural fields and gives an accurate estimates of near surface SM with a root mean square difference compared to in situ SM equal to 0.03 m3 m-3. In the final axis a new method is developed to disaggregate the 1 km resolution MODIS LST at 100 m resolution by integrating the near surface SM derived from Sentinel-1 radar data and the optical-vegetation index derived from Landsat observations. The new algorithm including the S-1 backscatter as input to the disaggregation, produces more stable and robust results during the selected year. Where, 3.35 °C and 0.75 were the lowest RMSE and the highest correlation coefficient assessed using the new algorithm
Schulze, Christopher A. [Verfasser]. "Minimizing Thermal Stress in Glass Production Processes : Model Reduction and Optimal Control / Christopher A Schulze". Aachen : Shaker, 2007. http://d-nb.info/1166509206/34.
Texto completo da fonteÅberg, Jonas. "On the Experimental Determination of Damping of Metals and Calculation of Thermal Stresses in Solidifying Shells". Doctoral thesis, KTH, Materialvetenskap, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4038.
Texto completo da fonteQC 20100929
Lankford, Maggie E. "Measurement of Thermo-Mechanical Properties of Co-Sputtered SiO2-Ta2O5 Thin Films". University of Dayton / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1627653071556618.
Texto completo da fonteKravchenko, Grygoriy A. "Crack patterns in thin films and X-ray optics thermal deformations". [Tampa, Fla] : University of South Florida, 2008. http://purl.fcla.edu/usf/dc/et/SFE0002770.
Texto completo da fonteYi, Duo. "Intégration de capteurs à fibre optique par projection thermique pour des applications de contrôle de structures intelligentes". Thesis, Belfort-Montbéliard, 2016. http://www.theses.fr/2016BELF0285/document.
Texto completo da fonteThis paper presents the modeling, simulation, experimentation and design of a smart composite structrure for high temperature measurements (up to 300 °C). In order to achieve this goal, a high temperature resistant metal coated optical fiber was considered and integrated into alumina coating. The smart composite structure consists of a substrate, a coating and an intensity modulated optical fiber temperature sensor. Firstly, an estimation of heat flux based on a experimental thermogram was firstly carried out in order to feed a numerical modeling. Then, different modelings were built to evaluate the surface temperature levels as well as the composite stress levels. The simulation showed that the composite (substrate and coating) could be considered as a thermally thin medium, the heat propagation within the composite was fast and could be estimated at a scale of millisecond. The stresses remained relatively uniform during the heating process but intensified during the cooling process. The modeling also showed that the stresses are not symmetrical in the fiber and depend on the position of the fiber relative to the substrate. After a modeling evaluation of the thermal levels as well as the stresses that may be achieved in the composite, an experimental step integrating a optical fiber into a thermal coating was carried out. Microscopic observation of surface and cross section were conducted in order to analyze the characteristics of the integrated fiber. The mechanical strength of the integrated fiber was then measured and the optical attenuation during the integration process as well as the thermal behavior of the integrated fiber during the thermal cycling were evaluated. Finally, an intensity modulated optical fiber temperature sensor was designed and integrated into ceramic coating by thermal spraying. A temperature measuring system was designed and the first tests of the thermal response as well as thermal cycling of temperature sensor were carried out. This study demonstrates the feasibility of designing a high temperature resistant smart composite structure by integrating an intensity modulated optical fiber temperature sensor in a ceramic coating elaborated by thermal spraying
Zhang, Bufa. "Optical methods of thermal diffusivity measurement". Thesis, London South Bank University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336374.
Texto completo da fonteVuppala, Archana. "Thermal and thermal stress analyses of the state-changing tooling". abstract and full text PDF (free order & download UNR users only), 2008. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1460787.
Texto completo da fonteSun, Mengyue SUN. "Optical sensor for normal stress distribution". University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1525432600494617.
Texto completo da fonteLivros sobre o assunto "Thermal and optical stress"
Walid, Qaqish, e Lewis Research Center, eds. Optical strain measurement system development: Final report. [Cleveland, Ohio]: National Aeronautics and Space Administration, 1987.
Encontre o texto completo da fonteWalid, Qaqish, e Lewis Research Center, eds. Optical strain measurement system development: Phase I. [Cleveland, Ohio]: National Aeronautics and Space Administration, 1987.
Encontre o texto completo da fonteSaravanos, D. A. Optimal fabrication processes for unidirectional metal-matrix composites: A computational simulation. [Washington, D.C.]: NASA, 1990.
Encontre o texto completo da fonteWelch, Ashley J., e Martin J. C. van Gemert, eds. Optical-Thermal Response of Laser-Irradiated Tissue. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-90-481-8831-4.
Texto completo da fonteWelch, Ashley J., e Martin J. C. Van Gemert, eds. Optical-Thermal Response of Laser-Irradiated Tissue. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4757-6092-7.
Texto completo da fonteGemert, Martin J. C. van e SpringerLink (Online service), eds. Optical-Thermal Response of Laser-Irradiated Tissue. Dordrecht: Springer Science+Business Media B.V., 2011.
Encontre o texto completo da fonteLammel, Gerhard. Optical microscanners and microspectrometers using thermal bimorph actuators. Boston: Kluwer Academic, 2002.
Encontre o texto completo da fonteLanin, Anatoly, e Ivan Fedik. Thermal Stress Resistance of Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-71400-2.
Texto completo da fonteHarry, Gregory, Timothy P. Bodiya e Riccardo DeSalvo, eds. Optical Coatings and Thermal Noise in Precision Measurement. Cambridge: Cambridge University Press, 2009. http://dx.doi.org/10.1017/cbo9780511762314.
Texto completo da fonteLammel, Gerhard, Sandra Schweizer e Philippe Renaud. Optical Microscanners and Microspectrometers using Thermal Bimorph Actuators. Boston, MA: Springer US, 2002. http://dx.doi.org/10.1007/978-1-4757-6083-5.
Texto completo da fonteCapítulos de livros sobre o assunto "Thermal and optical stress"
Das, Animesh Chandra, Ryozo Noguchi e Tofael Ahamed. "An Assessment of Drought Stress in Tea Plantation Areas in Bangladesh Using Optical and Thermal Remote Sensing: A Climate Change Perspective". In New Frontiers in Regional Science: Asian Perspectives, 23–47. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1188-8_2.
Texto completo da fonteObata, Yoshihiro. "Optimal Design of Functionally Graded Materials". In Encyclopedia of Thermal Stresses, 3508–19. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-2739-7_232.
Texto completo da fonteZohuri, Bahman, e Nima Fathi. "Thermal Stress". In Thermal-Hydraulic Analysis of Nuclear Reactors, 413–32. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17434-1_15.
Texto completo da fonteZohuri, Bahman. "Thermal Stress". In Thermal-Hydraulic Analysis of Nuclear Reactors, 501–22. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-53829-7_15.
Texto completo da fonteGeilfus, Christoph-Martin. "Thermal Stress". In Controlled Environment Horticulture, 99–111. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23197-2_9.
Texto completo da fonteFinucane, Edward W. "Thermal Stress". In Concise Guide to Environmental Definitions, Conversions, and Formulae, 77–82. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003420002-5.
Texto completo da fonteRogalski, Antoni, e Zbigniew Bielecki. "Thermal Detectors". In Detection of Optical Signals, 157–200. New York: CRC Press, 2022. http://dx.doi.org/10.1201/b22787-5.
Texto completo da fonteStieglitz, Robert, e Werner Platzer. "Optical Conversion". In Solar Thermal Energy Systems, 121–242. Cham: Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-43173-9_3.
Texto completo da fonteGooch, Jan W. "Thermal Stress Cracking". In Encyclopedic Dictionary of Polymers, 743. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11767.
Texto completo da fonteChanda, Pradip, e Suparna Mukhopaddhyay. "Managing Thermal Stress". In Energy Systems in Electrical Engineering, 51–58. New Delhi: Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2722-9_5.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Thermal and optical stress"
Firth, Austin, e Uma Srinivasan. "Laser Induced Thermal Stress in Optical Thin Films". In Optical Interference Coatings. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/oic.2019.thb.8.
Texto completo da fonteCôté, Patrice, e Nichola Desnoyers. "Thermal stress failure criteria for a structural epoxy". In SPIE Optical Engineering + Applications, editado por Alson E. Hatheway. SPIE, 2011. http://dx.doi.org/10.1117/12.893832.
Texto completo da fonteRyaboy, Vyacheslav M. "Analysis of thermal stress and deformation in elastically bonded optics". In Optical Engineering + Applications, editado por Alson E. Hatheway. SPIE, 2007. http://dx.doi.org/10.1117/12.732217.
Texto completo da fonteKlein, Claude A. "Thermal stress modeling for diamond-coated optical windows". In Boulder - DL tentative, editado por Harold E. Bennett, Lloyd L. Chase, Arthur H. Guenther, Brian E. Newnam e M. J. Soileau. SPIE, 1991. http://dx.doi.org/10.1117/12.57227.
Texto completo da fonteGrossman, K. R., R. Kelly Frazer, R. Bamberger e Joseph A. Miragliotta. "Optical technique to sense thermal stress in sapphire". In Aerospace/Defense Sensing, Simulation, and Controls, editado por Randal W. Tustison. SPIE, 2001. http://dx.doi.org/10.1117/12.439182.
Texto completo da fonteThielsch, Roland, Joerg Heber, Torsten Feigl e Norbert Kaiser. "Stress, microstructure and thermal-elastic properties of evaporated thin MgF_2 - films". In Optical Interference Coatings. Washington, D.C.: OSA, 2004. http://dx.doi.org/10.1364/oic.2004.the6.
Texto completo da fonteFang, Weidong, Qianbo Lu, Jian Bai, Peiwen Chen e Dandan Han. "Thermal stress of MOEMS accelerometers based on grating interferometric cavity". In Optical Design and Testing VIII, editado por Yongtian Wang, Kimio Tatsuno e Tina E. Kidger. SPIE, 2018. http://dx.doi.org/10.1117/12.2502273.
Texto completo da fonteHsu, M. Y., W. C. Lin, M. Y. Yang, C. Y. Chan, Y. C. Lin, S. T. Chang, C. F. Ho e T. M. Huang. "The Cassegrain Telescope primary mirror isostatic mount design for thermal stress". In SPIE Optical Engineering + Applications, editado por Philip E. Ardanuy e Jeffery J. Puschell. SPIE, 2010. http://dx.doi.org/10.1117/12.860018.
Texto completo da fonteShuying, Shao, Shao Jianda e Fan Zhengxiu. "Effects of different thermal histories on the residual stress of ZrO_2 thin films". In Optical Interference Coatings. Washington, D.C.: OSA, 2004. http://dx.doi.org/10.1364/oic.2004.mf5.
Texto completo da fonteOffermann, S., C. Bissieux e J. L. Beaudoin. "Optical and thermal restoration applied to thermo-elastic stress analysis by IR thermography". In 1998 Quantitative InfraRed Thermography. QIRT Council, 1998. http://dx.doi.org/10.21611/qirt.1998.019.
Texto completo da fonteRelatórios de organizações sobre o assunto "Thermal and optical stress"
Barnard, Casey Anderson. Thermal-stress modeling of an optical microphone at high temperature. Office of Scientific and Technical Information (OSTI), agosto de 2010. http://dx.doi.org/10.2172/1005061.
Texto completo da fontePikin A., A. Kponou e L. Snydstrup. Optical, Thermal and Stress Simulations of a 300-kwatt Electron Collector. Office of Scientific and Technical Information (OSTI), julho de 2006. http://dx.doi.org/10.2172/1061837.
Texto completo da fonteYahav, Shlomo, John McMurtry e Isaac Plavnik. Thermotolerance Acquisition in Broiler Chickens by Temperature Conditioning Early in Life. United States Department of Agriculture, 1998. http://dx.doi.org/10.32747/1998.7580676.bard.
Texto completo da fonteP.E. Klingsporn. Characterization of Optical Fiber Strength Under Applied Tensile Stress and Bending Stress. Office of Scientific and Technical Information (OSTI), agosto de 2011. http://dx.doi.org/10.2172/1054754.
Texto completo da fonteSides, Scott W. Thermal-Mechanical Stress in Semiconductor Devices. Office of Scientific and Technical Information (OSTI), setembro de 2018. http://dx.doi.org/10.2172/1471421.
Texto completo da fonteChochoms, Michael. Thermal Stress Awareness, Self-Study #18649. Office of Scientific and Technical Information (OSTI), novembro de 2016. http://dx.doi.org/10.2172/1333117.
Texto completo da fonteDai, Steve Xunhu, e Robert Chambers. Thermal mechanical stress modeling of GCtM seals. Office of Scientific and Technical Information (OSTI), setembro de 2015. http://dx.doi.org/10.2172/1222660.
Texto completo da fonteWemple, R. P., e D. B. Longcope. Thermal stress fracturing of magma simulant materials. Office of Scientific and Technical Information (OSTI), outubro de 1986. http://dx.doi.org/10.2172/7049178.
Texto completo da fonteJohnson, G. L., W. Stein, S. C. Lu e R. A. Riddle. SLAC divertor channel entrance thermal stress analysis. Office of Scientific and Technical Information (OSTI), julho de 1985. http://dx.doi.org/10.2172/5381884.
Texto completo da fonteLewis, James K. Configuration of PIPS for Thermal Stress Calculations. Fort Belvoir, VA: Defense Technical Information Center, setembro de 2001. http://dx.doi.org/10.21236/ada626105.
Texto completo da fonte