Conecte-se

Bibliografias temáticas / Test des défauts de fabrication / Artigos de revistas

Artigos de revistas sobre o tema "Test des défauts de fabrication"

Siga este link para ver outros tipos de publicações sobre o tema: Test des défauts de fabrication.

Autor: Grafiati

Publicado: 25 de maio de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Test des défauts de fabrication".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Aouchiche, Nedjma. "Défauts liés aux systèmes photovoltaïques autonomes et techniques de diagnostic - Etat de l’art". Journal of Renewable Energies 21, n.º 2 (30 de junho de 2018): 247–65. http://dx.doi.org/10.54966/jreen.v21i2.686.

Texto completo da fonte

Resumo:

L’efficacité de la production de l’énergie solaire photovoltaïque (PV) dépend essentiellement des conditions auxquelles est soumis le générateur photovoltaïque. Ces conditions peuvent être environnementales, opérationnelles liées au processus de fabrication ou de l’exploitation. Ces facteurs sont l’origine d’un important nombre de défauts qui engendre la dégradation de générateur PV. Dans la récente littérature, plusieurs méthodes ont été développées pour faire face à ce genre de problème. Dans cet article, on a cité des articles qui parlent de types de défauts rencontrés, leurs causes ainsi que leurs impacts. On a passé en revue un nombre d’articles qui traitent les méthodes de supervision et de diagnostic de systèmes photovoltaïques.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Millon, Célia, Arnaud Vanhoye e Anne-Françoise Obaton. "Ultrasons laser pour la détection de défauts sur pièces de fabrication additive métallique". Photoniques, n.º 94 (novembro de 2018): 34–37. http://dx.doi.org/10.1051/photon/20189434.

Texto completo da fonte

Resumo:

La fabrication additive (FA), notamment la FA de pièces métalliques, connait un essor dans les secteurs de pointe comme l’aéronautique ou le médical de par les possibilités accrues en termes de complexité géométrique, de fonctionnalités ou encore de personnalisation des pièces. Cependant, les poudres métalliques et la fusion laser mis en oeuvre dans certains procédés lors de la fabrication conduisent parfois à des défauts, comme par exemple des manques de fusion. Pour réduire les coûts de production engendrés par des pièces finies mais non conformes, la fabrication de ces pièces appelle à développer un contrôle en ligne. Les ultrasons laser (UL), non destructifs et sans contact, sont une piste prometteuse : ils combinent la sensibilité d’un contrôle par ultrasons avec la flexibilité d’un système optique.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Choukroune, Chloé. "Guide clinique des défauts primaires d’éruption". Revue d'Orthopédie Dento-Faciale 57, n.º 1 (março de 2023): 49–54. http://dx.doi.org/10.1051/odf/2023006.

Texto completo da fonte

Resumo:

Le défaut primaire d’éruption (DPE) est un trouble de l’éruption d’origine génétique. Il a été décrit pour la première fois en 1981 par William Proffit et Katherine Vig. Il peut être mis en évidence par l’association d’un interrogatoire précis, de la présence de signes cliniques et d’un examen radiologique. Toutefois, son diagnostic reste complexe, notamment en l’absence de test génétique destiné à l’usage quotidien des professionnels de santé. La prise en charge n’est pas aisée, puisque les dents tendent à s’ankyloser. Elle requiert systématiquement une réfléxion pluridisciplinaire. Cet article propose un guide clinique afin d’identifier les signes de ce trouble de l’éruption pour faciliter son diagnostic et sa prise en charge.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Derbal, Wassila, Abdellatif Zerizer, Jean Gérard e Daniel Guibal. "CARACTÉRISATION D’ABOUTAGES À ENTURES MULTIPLES POUR TROIS ESSENCES D’ALGÉRIE". BOIS & FORETS DES TROPIQUES 325, n.º 325 (17 de julho de 2015): 59. http://dx.doi.org/10.19182/bft2015.325.a31273.

Texto completo da fonte

Resumo:

Le pin d’Alep, Pinus halepensis, le chêne zéen, Quercus canariensis, et le chêne afa- rès, Quercus afares, sont trois essences parmi les plus abondantes en Algérie. Leur utilisation est cependant limitée par la pré- sence de défauts dans le bois et par leur nervosité. Les techniques de reconstitution par collage, notamment l’aboutage, per- mettent de s’affranchir de ces problèmes par la fabrication de produits purgés de défauts et beaucoup plus stables que les bois massifs. Pour ces trois essences, le comportement des bois a été étudié en déterminant comparativement sur bois massifs et sur bois aboutés la masse volu- mique, le module d’élasticité longitudinal, le module de cisaillement transverse et la contrainte de rupture en flexion. Les essais ont montré que, pour les trois essences, les bois massifs et les bois aboutés ont des rigidités équivalentes. Les résistances en flexion des bois aboutés sont toujours inférieures à celles des bois massifs du fait de la qualité très variable des aboutages : séchage hétérogène des bois, profilage imprécis des entures, défaut de pression de serrage lors du collage. Malgré cela, les valeurs caractéristiques obtenues pour la contrainte de rupture en flexion sont glo- balement conformes aux préconisations de la norme-référence. Les résultats de l’étude montrent que l’application indus- trielle de la technique de l’aboutage est envisageable pour ce type d’essences peu utilisées, sous réserve d’être mise en œuvre dans le respect des règles de l’art. L’entreprise algérienne Transbois, en charge de la transformation des bois et de la fabrication des éprouvettes aboutées pour l’étude, va poursuivre les travaux en- gagés en passant à un stade de fabrication préindustrielle.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Baumgartner, Gary. "Une nouvelle méthode d'analyse factorielle pour la typologie des consommateurs". Recherche et Applications en Marketing (French Edition) 4, n.º 3 (setembro de 1989): 3–23. http://dx.doi.org/10.1177/076737018900400302.

Texto completo da fonte

Resumo:

TYPER, une nouvelle méthode d'analyse factorielle de type Q, propose de corriger les défauts de l'analyse en composantes principales de type Q (ACPQ). Un test comparatif démontre que TYPER représente bien une amélioration par rapport à l'ACPQ. TYPER est ensuite appliqué à une étude de marketing politique. Les résultats sont meilleurs que ceux obtenus avec les algorithmes de typologie K-MEANS et WARD.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Seeleuthner, Ph, J. Bai e Ph Bompard. "Influence des défauts de fabrication sur les mécanismes d’endommagement dans un tube composite fibre de verre et résine époxyde." Revue de Métallurgie 91, n.º 9 (setembro de 1994): 1344. http://dx.doi.org/10.1051/metal/199491091344.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Angeon, Valérie, Brice Magdalou, Fred Célimène e Kinvi Logossah. "Défauts de coordination au sein de l'élevage de bovidés à la Martinique : un test expérimental de terrain". Revue d'Économie Régionale & Urbaine février, n.º 1 (2013): 37. http://dx.doi.org/10.3917/reru.131.0037.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Truax, Bruce E. "Interferometers eliminate test plates during fabrication". Applied Optics 27, n.º 11 (1 de junho de 1988): 2090. http://dx.doi.org/10.1364/ao.27.002090.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Hangouët, Jean-François, Michel Pausader e Jean-Philippe Cantou. "L'orthomosaïque à échelle départementale : les performances de l'imagerie Pléiades comparées au produit BD ORTHO®". Revue Française de Photogrammétrie et de Télédétection, n.º 208 (5 de setembro de 2014): 27–32. http://dx.doi.org/10.52638/rfpt.2014.127.

Texto completo da fonte

Resumo:

Les performances de l'imagerie des satellites Pléiades permettent-elles d'envisager de l'utiliser pour la production d'orthomosaïques d'emprises départementales qui soient conformes aux spécifications de la BD ORTHO® de l'IGN? Tel est l'enjeu technique des tests de faisabilité que rapporte cet article. Quatre orthomosaïques départementales ont été constituées à partir de scènes fournies par le CNES et Airbus Defence and Space dans le cadre de la Recette Thématique Utilisateurs des données Pléiades. Les deux premiers prototypes, réalisés à partir de premières images de 2012 du satellite 1A, souffraient principalement de défauts d'exhaustivité (du fait de la combinaison des contraintes de programmation et des aléas climatiques) et de défauts planimétriques (du fait de la combinaison de trop forts angles d'incidence et d'inexactitudes dans le modèle numérique de terrain utilisé pour l'orthorectification). L'aspect, qui reste inhabituel pour les familiers de l'imagerie aérienne, n'était pas encore optimal (du fait de la version utilisée à l'époque de l'algorithme de fusion radiométrique des images). L'amélioration de l'algorithme de fusion, le travail sur la programmation de l'acquisition, facilitée par le lancement du satellite 1B, et le renforcement des contraintes sur les angles d'incidence et le taux de nébulosité ont permis de produire les deux prototypes suivants (sur des acquisitions de 2013) à un meilleur niveau de conformité à ce qui est attendu de la BD ORTHO®. L'imagerie Pléiades se montre ainsi potentiellement complémentaire de l'imagerie aérienne dans le cycle de renouvellement des couvertures nationales, ce qu'illustre notamment un autre test que nous avons mené, consistant à incruster l'orthorectification du massif du Mont-Blanc, vu par Pléiades, dans l'orthomosaïque BD ORTHO® d'origine aérienne du département de la Haute-Savoie (74).

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Li, Hu, Yubo Fan e Zhou Li. "Fabrication and performance test of biodegradable supercapacitor". MRS Advances 4, n.º 37 (2019): 2063–70. http://dx.doi.org/10.1557/adv.2019.253.

Texto completo da fonte

Resumo:

ABSTRACTPower source plays an important role in keeping normal functions of biodegradable electronic devices. In this paper, we proposed a fabrication method of biodegradable supercapacitor (BSC), which can provide energy for portable and implantable medical electronics. The BSC has a sandwich-like symmetric structure, which was assembled layer by layer. The electrochemical performances of BSC were measured, including the cyclic voltammetry test, galvanostatic charge-discharge and electrochemical impedance spectroscopy. Titanium foil was used as a template to generate microstructure for polylactic acid (PLA) supporting substrate. The microstructure provided strong adhesion force for iron film in sputtering process. The nanoporous zinc oxide layer was prepared by evaporation-driven self-assembly technology on iron film. The nanoporous structure was in favour of ionic storage in charging-discharging process. About 60% of capacitance retention was achieved after 3000 times of cycling test. After connecting three BSC in series, a green LED pattern was lighted up immediately, indicating that the energy was stored in BSC device successfully. After immersing the BSC in DMEM, the BSC can be totally degraded gradually. This work provided a feasible scheme for developing biodegradable energy storage device, it also gave a possible avenue for powering biodegradable electronic devices.

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Lee, D. H., J. W. Song e T. S. Yoon. "FABRICATION AND TEST OF AN OPTICAL GRISM". Publications of The Korean Astronomical Society 28, n.º 3 (31 de dezembro de 2013): 75–82. http://dx.doi.org/10.5303/pkas.2013.28.3.075.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Jain, A., H. Wang, I. Ben-Zvi, P. Paul, J. W. Noé e A. Lombardi. "Fabrication and test of a superconducting RFQ". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 328, n.º 1-2 (abril de 1993): 251–54. http://dx.doi.org/10.1016/0168-9002(93)90635-u.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Doumani, Ikram, Patrick Pujo e Nacer M'Sirdi. "Détection de micro-défauts process, situés à l'intérieur des limites de surveillance d'une carte de contrôle. Application à la fabrication de wafer en microélectronique". Journal Européen des Systèmes Automatisés 49, n.º 2 (28 de abril de 2016): 161–80. http://dx.doi.org/10.3166/jesa.49.161-180.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Andreev, N., G. Chlachidze, D. Evbota, V. S. Kashikhin, M. Lamm, A. Makarov, T. Nakamoto et al. "Aluminum Stabilized NbTi Conductor Test Coil Design, Fabrication, and Test Results". IEEE Transactions on Applied Superconductivity 22, n.º 3 (junho de 2012): 6001804. http://dx.doi.org/10.1109/tasc.2011.2176098.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Wu, Chih-Wei, Ting-I. Wu, Wei-Han Chen e Long-Sun Huang. "DESIGN, FABRICATION, AND TEST OF A SILICATE MICROSENSOR". Biomedical Engineering: Applications, Basis and Communications 21, n.º 06 (dezembro de 2009): 389–94. http://dx.doi.org/10.4015/s1016237209001519.

Texto completo da fonte

Resumo:

This work describes a portable microsensor for analyzing the silicate concentration in water. Conventionally adopted silicate analysis methods involve bulky instrumentation that are limited in portability and immediateness. The proposed silicate microsensor consists of a microliquid core waveguide, passive spiral micromixer, and bubble traps that possess excellent signal enhancement properties. The microsensor size is 52 × 26 mm, while each measurement requires only 115 μl of a sample and reagents, thereby reducing the sample requirement for a considerable amount of time and work to collect expensive reagents. The spiral micromixer has a mixing capability superior to that of a premix mixture. Bubble traps have been developed to trap air bubbles formed in the microchannel in order to prevent gas bubbles from interfering with the measurements. As a linear function of silicate concentration, the absorbance response ranges from 0 to 250 nM. Additionally, the linearity is excellent with a linear R value of 0.9985 and the experimental detection limit is 8.9 nM. The proposed portable microsensor significantly contributes to aqueous inspection, subsequently creating a highly value-added technology for chemical sensors and microsystems.

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Kim, Bong-Hwan. "Fabrication of Test Socket from BeCu Metal Sheet". Journal of Sensor Science and Technology 21, n.º 1 (24 de janeiro de 2012): 34–38. http://dx.doi.org/10.5369/jsst.2012.21.1.34.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Harrold, S. J. "Book Review: Integrated Circuit Design, Fabrication and Test". International Journal of Electrical Engineering Education 35, n.º 2 (abril de 1998): 188–89. http://dx.doi.org/10.1177/002072099803500210.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Andreev, N., E. Barzi, G. Chlachidze, D. Evbota, V. S. Kashikhin, V. V. Kashikhin, M. J. Lamm et al. "Model NbTi Helical Solenoid Fabrication and Test Results". IEEE Transactions on Applied Superconductivity 22, n.º 3 (junho de 2012): 4101304. http://dx.doi.org/10.1109/tasc.2011.2178378.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

Okada, N., H. Kamijo, T. Ishigohka e M. Yamamoto. "Fabrication and test of superconducting air-core autotransformer". IEEE Transactions on Magnetics 28, n.º 1 (1992): 430–33. http://dx.doi.org/10.1109/20.119903.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

LI Jun-feng, 李俊峰. "Fabrication and test of SiC convex aspheric mirror". Chinese Journal of Optics and Applied Optics 7, n.º 2 (2014): 287–92. http://dx.doi.org/10.3788/co.20140702.0287.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Slater, Conor, Thomas Maeder e Peter Ryser. "Fabrication and Test of High-Temperature Ceramic Transformer". Solid State Phenomena 216 (agosto de 2014): 233–38. http://dx.doi.org/10.4028/www.scientific.net/ssp.216.233.

Texto completo da fonte

Resumo:

This work describes the fabrication and test of a high temperature (+200°C) capable high frequency transformer. It was manufactured using Low Temperature Co-fired Ceramic (LTCC) technology, which allowed the complex multilayer structure of ceramic and metal windings to be formed. However, the selected LTCC composition is a free sintering ceramic and there is an interaction between the metal conductor and the ceramic substrate during lamination and firing that can lead to significant deformation, presenting a significant engineering challenge. Here the fabrication process for the LTCC is described (screen printing, collation, lamination and firing) for a number of iterations of the transformer design, each of which was analysed for deformation and subjected to electrical tests. In addition a silicone adhesive for assembling the LTCC with the transformer was analysed for high-temperature performance. A test vehicle was assembled and it was subjected to 1000 hours at 210°C. Shear tests were performed at intervals to quantify the loss in bond strength over time. After a good solution for manufacture was found, a batch of transformers was produced, characterized and tested to demonstrate a high reproducibility and manufacturing yield.

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Wu, H., D. Sun e Z. Zhou. "Micro Air Vehicle: Configuration, Analysis, Fabrication, and Test". IEEE/ASME Transactions on Mechatronics 9, n.º 1 (março de 2004): 108–17. http://dx.doi.org/10.1109/tmech.2004.823885.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Kim, Ki Hoon, Hyeun Joong Yoon, Ok Chan Jeong e Sang Sik Yang. "Fabrication and test of a micro electromagnetic actuator". Sensors and Actuators A: Physical 117, n.º 1 (janeiro de 2005): 8–16. http://dx.doi.org/10.1016/j.sna.2003.10.079.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Park, M. J., S. Y. Kwak, W. S. Kim, S. W. Lee, J. K. Lee, J. H. Han, K. D. Choi, S. R. Kim, K. C. Seong e S. Y. Hahn. "Fabrication and test a 600kJ SMES model coil". Physica C: Superconductivity and its Applications 463-465 (outubro de 2007): 1247–51. http://dx.doi.org/10.1016/j.physc.2007.03.487.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

Lee, Sang Woo, Woo Young Sim e Sang Sik Yang. "Fabrication and in vitro test of a microsyringe". Sensors and Actuators A: Physical 83, n.º 1-3 (maio de 2000): 17–23. http://dx.doi.org/10.1016/s0924-4247(99)00380-5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Rieth, Michael. "Diffusion weld study for Test Blanket Module fabrication". Fusion Engineering and Design 84, n.º 7-11 (junho de 2009): 1602–5. http://dx.doi.org/10.1016/j.fusengdes.2009.02.006.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

Leoni, R., F. Mattioli, M. G. Castellano, S. Cibella, P. Carelli, S. Pagano, D. Perez de Lara et al. "Fabrication and test of Superconducting Single Photon Detectors". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 559, n.º 2 (abril de 2006): 564–66. http://dx.doi.org/10.1016/j.nima.2005.12.054.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Stuart, G. C., J. C. Armitage, M. S. Dixit, J. Dubeau, P. G. Estabrooks, L. A. Hamel, J. P. Martin et al. "Fabrication and test beam operation of plastic MSGCs". Nuclear Physics B - Proceedings Supplements 44, n.º 1-3 (novembro de 1995): 234–41. http://dx.doi.org/10.1016/s0920-5632(95)80036-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Lang, Udo, Marcel Reichen e Jürg Dual. "Fabrication of a tensile test for polymer micromechanics". Microelectronic Engineering 83, n.º 4-9 (abril de 2006): 1182–84. http://dx.doi.org/10.1016/j.mee.2006.01.050.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

M. Lele, Prof (Dr ). Mandar, Darshan P. Jangale, Radhika S. Potdar e Aishwarya A. Patil. "Design and Fabrication of Retractor Durability Test Prototype". IOSR Journal of Mechanical and Civil Engineering 13, n.º 04 (abril de 2016): 20–25. http://dx.doi.org/10.9790/1684-1304012025.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

Placidi, Marcel, Phillippe Godignon, Jaume Esteve, Narcis Mestres e Gabriel Abadal. "Fabrication and Test of 3C-SiC Electrostatic Resonators". Materials Science Forum 556-557 (setembro de 2007): 949–52. http://dx.doi.org/10.4028/www.scientific.net/msf.556-557.949.

Texto completo da fonte

Resumo:

Silicon Carbide has proven its relevance for various MEMS and sensors devices applications. This paper presents the fabrication and the first test results of 3C-SiC electrostatic resonators actuated by applying a combination of AC and DC voltages. The recipe used for the fabrication has taken the advantage of the starting material, 3C-SiC grown on Si, which allows us to use the Si substrate as sacrificial layer to release the structures. Resonators have been fabricated by a two-step process, combining RIE ICP etching with HF wet etching. Resonators have been successfully electrostatically actuated in air-ambient condition. The resonance frequencies were clearly identified, although capacitive current created by actuation was not detected.

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Yu, Qi Ming. "Specimen's Short Fatigue Crack Fabrication Test for Q420qE". Advanced Materials Research 711 (junho de 2013): 107–9. http://dx.doi.org/10.4028/www.scientific.net/amr.711.107.

Texto completo da fonte

Resumo:

According to the BS7448 fracture toughness test standard, this paper conducted a CTOD(crack tip open displacement) fatigue crack precast test with the bridge steel and analysis the tests results, thus obtained the related conclusions. With the increase of thickness and strength of the steel plate, the security of fatigue performance and toughness of the plate is becoming more important for the structure. So the evaluation of fatigue performance is a very significant work for engineer. This dissertation through the text study the CTOD Specimens Fatigue Crack Prefabricated process of bridge steel and its characteristics, and its results will provide the important experimental basis and computation basis.

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

Michael, P. C., A. Zhukovsky, B. A. Smith, J. H. Schultz, A. Radovinsky, J. V. Minervini, K. P. Hwang e G. J. Naumovich. "Fabrication and test of the LDX levitation coil". IEEE Transactions on Appiled Superconductivity 13, n.º 2 (junho de 2003): 1620–23. http://dx.doi.org/10.1109/tasc.2003.812808.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Cho, J. W., H. J. Kim, J. H. Bae, K. D. Sim e K. C. Seong. "Fabrication and Test of a 3MJ SMES Magnet". IEEE Transactions on Appiled Superconductivity 14, n.º 2 (junho de 2004): 743–45. http://dx.doi.org/10.1109/tasc.2004.830096.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Knight, M., e J. House. "Design, fabrication, and test of a peristaltic micropump". Microsystem Technologies 10, n.º 5 (agosto de 2004): 426–31. http://dx.doi.org/10.1007/s00542-004-0427-y.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Okada, Hidetaka, Seiji Yamaguchi, Mitsuhiro Hibino, Takeshi Yao, Shin Hasegawa, Masashi Neo e Takashi Nakamura. "Development of Apatite Micropattern Test Specimen for Cell Operation". Key Engineering Materials 309-311 (maio de 2006): 663–66. http://dx.doi.org/10.4028/www.scientific.net/kem.309-311.663.

Texto completo da fonte

Resumo:

Apatite micropattern was fabricated by a combination of biomimetic process and transcription of resist pattern. We optimized some fabrication conditions such as the height of resist pattern, temperature, concentrations and pH of simulated body fluid(SBF). Consequently, we successfully obtained apatite micropattern widely and homogeneously on a substrate in a short fabrication period.

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Silva, G., J. C. Ruel, M. Samson e D. Pin. "Influence de quelques défauts externes sur la stabilité des arbres face à une simulation mécanique de l'action du vent". Canadian Journal of Forest Research 28, n.º 1 (1 de janeiro de 1998): 123–31. http://dx.doi.org/10.1139/x97-180.

Texto completo da fonte

Resumo:

A simulation of wind action was achieved to test the influence of some external defects on the resistance of standing trees of balsam fir (Abies balsamea (L.) Mill.), yellow birch (Betula alleghaniensis Britton), and trembling aspen (Populus tremuloides Michx.). The methodology used consisted of applying a force on the tree with a winch. Every tree was filmed during winching, and the geometrically corrected images were used to compute displacement. Balsam fir trees tended to break more than uproot, and in most cases, breakage occurred at the crack level. Even though maximum turning moment did not differ between control and defective balsam fir trees, a significant difference was found for maximum stress, showing a reduction in resistance associated with cracks. No reduction in resistance could be seen for the other species, but trees were relatively young and care should be taken before extending these results to older trees.

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

Perry, Jillian L., Peng Guo, Shannon K. Johnson, Hitomi Mukaibo, Jon D. Stewart e Charles R. Martin. "Fabrication of biodegradable nano test tubes by template synthesis". Nanomedicine 5, n.º 8 (outubro de 2010): 1151–60. http://dx.doi.org/10.2217/nnm.10.110.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

Kim, Dae Gon, Sung Taik Hong, Deok Heung Kim, Won Sik Hong e Chang-Woo Lee. "Fabrication and Reliability Test of Device Embedded Flexible Module". Journal of the Korean Welding and Joining Society 31, n.º 3 (30 de junho de 2013): 84–88. http://dx.doi.org/10.5781/kwjs.2013.31.3.84.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Benson, T. M. "Design, Fabrication and Test Techniques for Microstrip Transmission Lines". International Journal of Electrical Engineering & Education 23, n.º 3 (julho de 1986): 231–37. http://dx.doi.org/10.1177/002072098602300307.

Texto completo da fonte

Resumo:

The background to and methods for an experiment on the design, fabrication and test of microstrip circuits are presented. The experiment is intended to complement final year of undergraduate or M.Sc. level electromagnetics sections of Electrical and Electronic Engineering courses. The circuits are fabricated using p.c.b. techniques thus keeping costs to a minimum.

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Tawarayama, Kazuo, Yumi Nakajima, Suigen Kyoh, Hajime Aoyama, Kentaro Matsunaga, Satoshi Tanaka e Shunko Magoshi. "Application of Extreme Ultraviolet Lithography to Test Chip Fabrication". Japanese Journal of Applied Physics 50, n.º 6S (1 de junho de 2011): 06GB08. http://dx.doi.org/10.7567/jjap.50.06gb08.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

SHI, Yunbo. "Fabrication and Test of Micro High Overloading Acceleration Sensor". Chinese Journal of Mechanical Engineering 44, n.º 09 (2008): 200. http://dx.doi.org/10.3901/jme.2008.09.200.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

Shorey, Aric, e Scott Pollard. "Progress in Fabrication and Test of Glass Interposer Substrates". Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2014, DPC (1 de janeiro de 2014): 001239–58. http://dx.doi.org/10.4071/2014dpc-wa13.

Texto completo da fonte

Resumo:

There is growing interest in applying glass as an interposer substrate for 2.5D/3D applications. Advantages of glass based solutions include significant opportunities for cost benefits by leveraging economies of scale as well as forming substrates at design thickness. A lot of work is being done to validate the value of glass as an interposer substrate. One important area is the electrical performance of glass relative to silicon. Because glass is an insulator, it is expected to have better electrical performance than silicon. Electrical characterization and electrical models demonstrate the advantages of the insulating properties of glass, and its positive impact on functional performance. Further advantages are anticipated in reliability performance, because of the ability to adjust thermal properties such as coefficient of thermal expansion (CTE) of glass. Progress in the ability to fabricate wafers and panels fully populated with through and blind holes has been reported. We describe the ability to leverage existing downstream processes such as via filling of both through and blind vias, as well as novel handling techniques to enable processing of thin glass. We also report progress in evaluating reliability through thermal cycle tests.

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Sekine, S., A. Ninomiya e T. Ishigohka. "Fabrication and test of superconducting generator with ring windings". IEEE Transactions on Appiled Superconductivity 10, n.º 1 (março de 2000): 943–46. http://dx.doi.org/10.1109/77.828387.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

Makarov, A., N. Andreev, V. S. Kashikhin, M. Lamm, G. V. Velev, A. Yamamoto e T. Ogitsu. "Design and Fabrication of the Mu2e Cable Test Solenoid". IEEE Transactions on Applied Superconductivity 21, n.º 3 (junho de 2011): 2324–26. http://dx.doi.org/10.1109/tasc.2010.2100353.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Petersen, DR, DM Blackketter e EM Odom. "Accurate and Precise Fabrication of Iosipescu Shear Test Specimens". Journal of Testing and Evaluation 21, n.º 4 (1993): 322. http://dx.doi.org/10.1520/jte11959j.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

Cook, E. H., M. S. Weinberg, Z. S. Spakovszky e D. J. D. Carter. "Fabrication of a rotary carbon nanotube bearing test apparatus". Journal of Physics: Conference Series 660 (10 de dezembro de 2015): 012081. http://dx.doi.org/10.1088/1742-6596/660/1/012081.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Tawarayama, Kazuo, Yumi Nakajima, Suigen Kyoh, Hajime Aoyama, Kentaro Matsunaga, Satoshi Tanaka e Shunko Magoshi. "Application of Extreme Ultraviolet Lithography to Test Chip Fabrication". Japanese Journal of Applied Physics 50, n.º 6 (20 de junho de 2011): 06GB08. http://dx.doi.org/10.1143/jjap.50.06gb08.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Jeong, Ok Chan, e Satoshi Konishi. "Fabrication and drive test of pneumatic PDMS micro pump". Sensors and Actuators A: Physical 135, n.º 2 (abril de 2007): 849–56. http://dx.doi.org/10.1016/j.sna.2006.09.012.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Hase, Takashi, Mamoru Hamada, Ryoichi Hirose, Yasuhide Nagahama, Koji Shikimachi e Shigeo Nagaya. "Fabrication Test of YBCO Coil and Multi-Tape Conductor". IEEE Transactions on Applied Superconductivity 17, n.º 2 (junho de 2007): 2216–19. http://dx.doi.org/10.1109/tasc.2007.898341.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!