Literatura científica selecionada sobre o tema "TEGs"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "TEGs".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "TEGs"
Gogoc, Szymon, e Przemyslaw Data. "Organic Thermoelectric Materials as the Waste Heat Remedy". Molecules 27, n.º 3 (2 de fevereiro de 2022): 1016. http://dx.doi.org/10.3390/molecules27031016.
Texto completo da fonteLiu, Qiulin, Guodong Li, Hangtian Zhu e Huaizhou Zhao. "Micro thermoelectric devices: From principles to innovative applications". Chinese Physics B 31, n.º 4 (1 de abril de 2022): 047204. http://dx.doi.org/10.1088/1674-1056/ac5609.
Texto completo da fonteCamut, Julia, Eckhard Müller e Johannes de Boor. "Analyzing the Performance of Thermoelectric Generators with Inhomogeneous Legs: Coupled Material–Device Modelling for Mg2X-Based TEG Prototypes". Energies 16, n.º 9 (24 de abril de 2023): 3666. http://dx.doi.org/10.3390/en16093666.
Texto completo da fonteFaheem, Muhammad, Muhammad Abu Bakr, Muntazir Ali, Muhammad Awais Majeed, Zunaib Maqsood Haider e Muhammad Omer Khan. "Evaluation of Efficiency Enhancement in Photovoltaic Panels via Integrated Thermoelectric Cooling and Power Generation". Energies 17, n.º 11 (27 de maio de 2024): 2590. http://dx.doi.org/10.3390/en17112590.
Texto completo da fonteSanin-Villa, Daniel, Oscar Danilo Montoya e Luis Fernando Grisales-Noreña. "Material Property Characterization and Parameter Estimation of Thermoelectric Generator by Using a Master–Slave Strategy Based on Metaheuristics Techniques". Mathematics 11, n.º 6 (9 de março de 2023): 1326. http://dx.doi.org/10.3390/math11061326.
Texto completo da fonteAttar, Alaa, Mohamed Rady, Abdullah Abuhabaya, Faisal Albatati, Abdelkarim Hegab e Eydhah Almatrafi. "Performance Assessment of Using Thermoelectric Generators for Waste Heat Recovery from Vapor Compression Refrigeration Systems". Energies 14, n.º 23 (6 de dezembro de 2021): 8192. http://dx.doi.org/10.3390/en14238192.
Texto completo da fonteSingh, Yogesh, Satyendra kumar Singh e Purnima Hazra. "Future Prospect of Rare Earth Element Free Materials for Thermoelectric Generators". ECS Transactions 107, n.º 1 (24 de abril de 2022): 453–64. http://dx.doi.org/10.1149/10701.0453ecst.
Texto completo da fonteMashburn, Paulla, Jodie Ecklund e Jeffrey Riley. "Do Heparinase Thrombelastographs Predict Postoperative Bleeding?" Journal of ExtraCorporeal Technology 28, n.º 4 (dezembro de 1996): 185–90. http://dx.doi.org/10.1051/ject/1996284185.
Texto completo da fonteFaraj, Jalal, Wassim Salameh, Ahmad Al Takash, Georges El Achakr, Hicham El Hajj, Cathy Castelain e Mahmoud Khaled. "Dual harvesting from exhaust gas of diesel generators using thermoelectric generators and cold water tank". Journal of Physics: Conference Series 2754, n.º 1 (1 de maio de 2024): 012021. http://dx.doi.org/10.1088/1742-6596/2754/1/012021.
Texto completo da fonteMorais, Flávio, Pedro Carvalhaes-Dias, Luís Duarte, Anderson Spengler, Kleber de Paiva, Thiago Martins, Andreu Cabot e José Siqueira Dias. "Optimization of the TEGs Configuration (Series/Parallel) in Energy Harvesting Systems with Low-Voltage Thermoelectric Generators Connected to Ultra-Low Voltage DC–DC Converters". Energies 13, n.º 9 (6 de maio de 2020): 2297. http://dx.doi.org/10.3390/en13092297.
Texto completo da fonteTeses / dissertações sobre o assunto "TEGs"
Lönn, Anders, e Tomas Nyberg. "Utbyte mellan Polishögskolan i Umeå och Tegs centralskola". Thesis, Umeå University, Basic training programme for Police Officers, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-27271.
Texto completo da fonteTegs central skola har tidigare varit en s.k. problemskola, men har numer ett mycket bättre rykte. Vi har fått antydningar om att det finns ett stort intresse från skolan och föräldrarna till eleverna, att polisen ska komma till skolan och informera ungdomarna om t.ex. alkohol/droger och mobbing. Tyvärr har polisen i dagens läge vare sig resurser eller tid att fullt ut tillmötesgå dessa önskemål. Tanken med vårt arbete är att skaffa oss en uppfattning om det är möjligt, och om intresse finns att starta ett förhoppningsvis långvarigt samarbete mellan Tegs central skola och polisutbildningen i Umeå. Vi vill ta reda på vilka problemområden som finns på skolan och i slutändan kunna presentera idéer om hur man tillsammans ska kunna arbeta för att minimera dessa problem. Arbetet kommer att visa på olika faktorer som ligger bakom ungdomars inträde i kriminaliteten, och även idéer om hur ett samarbete mellan skolorna skulle kunna se ut kommer att presenteras
Roepsch, Jodi Ann. "Characterizaton of Triethoxyfluorosilane and Tetraethoxysilane Based Aerogels". Thesis, University of North Texas, 2001. https://digital.library.unt.edu/ark:/67531/metadc2999/.
Texto completo da fonteHartman, Jennifer. "Alignment of Middle School Core TEKS with Visual Arts TEKS". Thesis, University of North Texas, 2010. https://digital.library.unt.edu/ark:/67531/metadc33160/.
Texto completo da fonteOulfarsi, Mostafa. "Contribution à l’amélioration de la fiabilité de modules thermoélectriques : développement de solutions matériaux alternatives". Electronic Thesis or Diss., Université de Lorraine, 2020. http://www.theses.fr/2020LORR0228.
Texto completo da fonteEnergy conversion from waste heat through thermoelectric effects (Seebeck effect) is a potential new renewable energy source. The thermoelectric (TE) technology is nevertheless limited to niche terrestrial applications due to its low efficiency (5-6%), but also due to the technological challenges to be overcome to avoid a degradation of the TE generators (TEG). Our thesis is devoted to this problem within the framework of a research program supported by the ANR (RELIATEG project) including HotBlockOnBoard (HBOB), CEA LITEN, CIRIMAT and IJL as partners. The objective is to make reliable the TEG, manufactured by HBOB, based on silicides, Mg₂Si₁₋ₓSnₓ (n-type) and MnSi₁₊ᵧ (p-type), for long-term use in the vicinity of 400-500°C. Our main role is to understand the mechanisms leading to their embrittlement, particularly to the oxidation problems linked to the Mg₂Si₀,₆Sn₀,₄ material. As they are unavoidable, we turned to the solutions of finding a protective coating and/or testing the thermal stability under air of a Mg₂Si₁₋ₓSnₓ material, less sensitive to oxidation. After a bibliographical synthesis of the basic concepts of TE and of the state of the art of TE materials, the choice of materials used by HBOB have been justified. The various stages of TEG manufacturing and the experimental techniques used to characterize the microstructure of TE materials and their thermal stability are presented. The performance tests performed on TEGs show that the power obtained, measured up to 450°C, is reproducible for the 25 devices tested. However, it is about 25% lower than what one could achieve with a perfect TEG, as shown by the simulations we carried out using the Comsol MultiPhysics software. The stability tests showed that the devices are stable under air at 250°C, for 500 hours or under 1000 cycles, and that they begin to degrade under air at 350°C through a pesting phenomenon linked to the oxidation of Mg₂Si₀,₆Sn₀,₄. Under vacuum, this process is slowed down but the presence of residual oxygen does not completely stabilize the material. At 500°C under air, the pesting is observed from 3 hours of testing. The oxidation tests carried out on the two materials with different Sn content showed the significant role of tin on the oxidation phenomena. A model explaining the pesting phenomenon was developed by the combined analyses of results obtained by thermogravimetric measurements, scanning electron microscopy and X-ray diffraction. On the basis of bibliography and phase diagrams of the differents systems, protective coatings based on ceramics, metallic silicides, metals and glasses have been studied. Several deposition methods were explored: sintering by Spark Plasma Sintering, electrochemical nickel plating, pack cementation, slurry, PVD and spray deposits. The most promising coatings were obtained with a glass whose CTE is close to that of the n-type material
Nakasēs, Athanasios. "O naos tēs Athēnas Makistu /". Athēna : Tameio Archaiologikōn Porōn kai Apallotriōseōn, 2004. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=014734171&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Texto completo da fonteRoper, Nick. "South Tees diabetes mortality study". Thesis, University of Newcastle upon Tyne, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.399543.
Texto completo da fonteTarnoff, David. "Episode 3.02 – Tens Complement Arithmetic". Digital Commons @ East Tennessee State University, 2020. https://dc.etsu.edu/computer-organization-design-oer/18.
Texto completo da fonteIerokēpiōtēs, Kōstas G. "Ē ellēnikē ekpaideusē stēn eparchia Paphu (1878-1960) : symbolē stēn istoria tēs ekpaideusēs tēs Kypru /". Leukōsia : Politistikes Hypēresies Hypurgeiu Paideias kai Politismu, 2004. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=020301014&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Texto completo da fonteCampagne, Ibarcq Claudie. "Tels serviteurs, tels maîtres : la représentation des domestiques dans la peinture vénitienne de la Renaissance". Paris, EHESS, 2015. http://www.theses.fr/2015EHES0051.
Texto completo da fonteRenaissance Venetian paintings include many servants, who often escape the notice of those who view them. A systematic statistical inventory of those servant figures and their grouping into different categories have made it obvious that those figures are hardly ever realistic or decorative but are most of the time an integral part of a symbolic system focusing on their masters' place in society and of the elite's conception of its social role, in particular during the more aristocratic second half of the sixteenth century. On the other hand, servant figures may be used to express views on varied subjects, either literary, theological or political, or even with an artistic or satirical goal in mind. Indeed, servants, figures of the popolo, have a legitimate place in pictorial representation in a city such as Venice where the Patricians like to think of the community as united. The systematic study of servants in painting has also led to a new questioning of well-known works when they include servant figures which differ from traditional or contemporary norms. The study of those discrepancies has shed a new light on those works by Carpaccio, Titian, Tintoretto and Veronese
Frangelakis, Fotios. "Controlling and upscaling laser induced surface morphology : from tens of microns to tens of nanometres". Thesis, Bordeaux, 2019. http://www.theses.fr/2019BORD0021/document.
Texto completo da fonteCurrent industrial markets demand highly value-added products offering new features at a low-cost. Among the most desired functionalities are surface colouring and blackening, anti-icing, anti-biofouling, wear reduction and anti-reflectivity. Laser surface processing holds a virtually endless potential in surface functionalization since it can generate versatile surface properties by modifying surface morphology and chemistry. Nevertheless, developing functional surfaces for implementation in the industry requires action on three levels. The first is to connect the macro-scale surface properties (colour, mechanical resistance, chemical stability, ageing) and the micro & nano-scale morphology. The second is to increase the level of control over the laser induced morphology in the near micron and submicron scale. The third is to upscale the lab-developed process both in terms of processed area and cycle time. Functional textures found in nature can be used as a guideline for connecting the surface texture with the surface property. It is well established that different textures can enable different functionalities. Nevertheless, the level of control of the laser induced morphology has to be improved significantly in order to allow one to mimic nature’s examples. Increase of control requires an in-deep understanding of the physical mechanisms that lead to nanostructure formation. To this end, we carry out a comprehensive parametric study of fs processing on stainless steel. The impact of wavelength, overlap, fluence, dose, repetition rate, polarization and interpulse delay in the induced morphology was investigated.We investigate several techniques to achieve controlled laser structuring in the submicron regime. Ripples of a few tens of nanometres were obtained with a UV laser. Double pulses were employed to further control the submicron structures. Structures of different size and symmetry were obtained in different delays underlining the key role of the interpulse delay (Δτ). Homogeneous triangular and square 2D-LIPSS were obtained for Δτ smaller than 5 ps and 500 ps, respectively. Process parameters and particularly fluence and polarization were found to play also a role in the laser induced feature characteristics. In a complementary set of experiments, we show that similar results can be obtained for small delays with a robust setup of birefringent crystals. In the above micron regime, trains of single pulses were employed for controlling the surface morphology. Fluence, dose and repetition rate, were varied to show a systematic variation of spikes in the range of tens of micrometers. Combining our experimental results with simulation data we underline the key role of heat accumulation on the structures size. Finally, we proposed an upscaling strategy showing the possibility to exploit repetition rates up to 10 MHz for laser texturing.In the upscaling part, areas much larger than the spot size were textured homogenously using high repetition rate laser and innovative laser positioning systems. Nanometric ripples induced by UV laser act as a subwavelength grating. Laser induced nano roughness exhibits superhydrophobic properties. Uniform distribution of well-defined, sub-wavelength, 2D-LIPSS was successfully generated over ~1 cm2. The final surface exhibits multiple axis iridescence giving a holographic effect. Employing a 10 MHz laser surface was textured at a rate of ~ 1 min/cm2 almost 60 times faster compared to our starting point. Lastly, surface blackening was achieved at a rate of ~ 9 sec/cm2.In conclusion, valuable data were provided both in surface functionalization, in understanding and controlling of laser induced structuring and in upscaling a lab developed process. We believe that our results open the way for exploiting fs laser texturing in everyday applications employing up to date laser sources and positioning systems
Livros sobre o assunto "TEGs"
Vavouskos, Anastasios Kōn, e Anastasios Kōn Vavouskos. Themeliōdeis arches tēs ekklēsiastikēs dikonomias tēs ekklēsias tēs Ellados: Ē archē tēs exasphaliseōs tēs anexartēsias kai tēs amerolēpsias tōn organōn aponomēs tēs ekklēsiastikēs dikaiosynēs. Thessalonikē: Etaireia Makedonikōn Spoudōn, 2003.
Encontre o texto completo da fonteTsirimōkou, Lizy. Grammatologia tēs polēs, logotechnia tēs polēs, poleis tēs logotechnias. Athēna: Lōtos, 1988.
Encontre o texto completo da fonteTsirimōkou, Lizy. Grammatologia tēs polēs, logotechnia tēs polēs, poleis tēs logotechnias. Athēna: Lōtos, 1988.
Encontre o texto completo da fonteKatsinēs, Mētsos. Tēs leuterias kai tēs eirēnēs. Athēna: To Hellēniko Vivlio, 1990.
Encontre o texto completo da fonteKaloutsa-Maurokephalou, Lilē. Tēs phōtias kai tēs erēmias. Athēna: "Nea Synora" Ekdotikos Organismos Livanē, 1997.
Encontre o texto completo da fonteBurton, Katherine, e Katherine Burton. Tess. Toronto: Harlequin Books, 1989.
Encontre o texto completo da fonteTecs. Llandysul: Gwasg Gomer, 1987.
Encontre o texto completo da fonteTennant, Emma. Tess. London: HarperCollins, 1993.
Encontre o texto completo da fonteReekie, Jocelyn. Tess. Vancouver, B.C: Raincoast, 2002.
Encontre o texto completo da fonteTennant, Emma. Tess. Halifax: Remploy Press, 1994.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "TEGs"
Nikitin, Mikhail, e Sergey Skipidarov. "The Nature of Heat Exchange of Human Body with the Environment and Prospects of Wearable TEGs". In Thin Film and Flexible Thermoelectric Generators, Devices and Sensors, 207–19. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-45862-1_8.
Texto completo da fonteRennels, Donald C., e Hobart M. Hudson. "Tees". In Pipe Flow, 177–200. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118275276.ch16.
Texto completo da fonteLatham, David W. "TESS". In Encyclopedia of Astrobiology, 1660. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-11274-4_1574.
Texto completo da fonteGooch, Jan W. "Tego". In Encyclopedic Dictionary of Polymers, 731. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11596.
Texto completo da fonteLatham, David W. "TESS". In Encyclopedia of Astrobiology, 2481. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-44185-5_1574.
Texto completo da fonteBohnen, R. "TEMS". In Taktische Medizin, 379–87. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-39689-2_27.
Texto completo da fonteBolmont, Emeline, e Marion Cointepas. "TESS". In Encyclopedia of Astrobiology, 1–2. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/978-3-642-27833-4_5566-1.
Texto completo da fonteMusselwhite, David. "Tess". In Social Transformations in Hardy’s Tragic Novels, 108–44. London: Palgrave Macmillan UK, 2003. http://dx.doi.org/10.1057/9780230504523_5.
Texto completo da fonteLatham, David W. "TESS". In Encyclopedia of Astrobiology, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-27833-4_1574-2.
Texto completo da fonteBolmont, Emeline, e Marion Cointepas. "TESS". In Encyclopedia of Astrobiology, 3018–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-65093-6_5566.
Texto completo da fonteTrabalhos de conferências sobre o assunto "TEGs"
Sullivan, Owen, Saibal Mukhopadhyay e Satish Kumar. "Thermoelectric Generators Embedded in Microelectronic Chip". In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87953.
Texto completo da fonteKishita, Yusuke, Michinori Uwasu, Hiroyuki Takeda, Keishiro Hara, Yuji Ohishi e Masashi Kuroda. "Assessing the Greenhouse Gas Emissions and Cost of Thermoelectric Generators for Passenger Automobiles: A Life Cycle Perspective". In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34483.
Texto completo da fonteYan, Baoyu, Gen Li, Hongfen Cao, Xiaozhong Wang, Zhongcheng Wang e Yulong Ji. "Experimental Study on the Effect of Interface Heat Transfer on Performance of Thermoelectric Generators". In ASME 2019 6th International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/mnhmt2019-4156.
Texto completo da fonteArifeen, Shams U., Victor Wolemiwa, Dominic Nwoke, Lyudmyla L. Barannyk, Gabriel P. Potirniche, Aicha Elshabini e Fred Barlow. "Finite Element Analysis and Fatigue Life Prediction of an Aluminum Alloy Braze for High Temperature Thermoelectric Generator Package Assembly". In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38829.
Texto completo da fonteZhou, Siyi, Bahgat G. Sammakia, Bruce White, Peter Borgesen e Cheng Chen. "Enhancement of the Power-Conversion Efficiency for Thermoelectric Generators". In ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ipack2013-73225.
Texto completo da fonteLin, Chih Chieh, Hanfei Chen, Mahder Tewolde, Gaosheng Fu, Di Liu, Tao Zhang, He Tao et al. "Thermoelectrically Powered Sensing for Small Modular Reactors". In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ht2013-17788.
Texto completo da fonteCoday, Eric, Jordan Parker, Randall Johnson e Shawn Duan. "Design and Analysis of an Innovative Portable Water-Cooled Thermoelectric Generator Apparatus". In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10804.
Texto completo da fonteLee, Soochan, Nishant Singh, Patrick E. Phelan e Carole-Jean Wu. "Harvesting CPU Waste Heat Through Pyroelectric Materials". In ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48421.
Texto completo da fonteDove, Megan, Jaideep Pandit, Srinath Ekkad e Scott Huxtable. "Experimental Validation of Temperature Distributions Across a Heat Exchanger for a Thermoelectric Generator". In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88282.
Texto completo da fonteNajeeb, Ovais Ahmed Bin, Rasish Khatri, Liping Zheng e Jeremy Liu. "The Development of Turboexpander-Generators for Gas Pressure Letdown Part 3: Design Validation". In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-82293.
Texto completo da fonteRelatórios de organizações sobre o assunto "TEGs"
Neville, Kelly. Training Environment Support System (TESS). Fort Belvoir, VA: Defense Technical Information Center, fevereiro de 2003. http://dx.doi.org/10.21236/ada413042.
Texto completo da fonteJaison, Shaleena. TEDS Operating Modes and Control Strategies. Office of Scientific and Technical Information (OSTI), junho de 2023. http://dx.doi.org/10.2172/1986471.
Texto completo da fonteministerråd, Nordisk. Utviklingen i nordisk arverett - tegn i tiden. Nordic Council of Ministers, fevereiro de 2013. http://dx.doi.org/10.6027/tn2013-517.
Texto completo da fonteMichelsen, Gunnar. Grenseløse tegn? – Mobilitet og tegnspråk i Norden. Nordens välfärdscenter, maio de 2021. http://dx.doi.org/10.52746/ishc6013.
Texto completo da fonteLybanon, M. Oceanographic Expert System: Potential for TESS(3) Applications. Fort Belvoir, VA: Defense Technical Information Center, julho de 1992. http://dx.doi.org/10.21236/ada254908.
Texto completo da fonteLu, Xingang, e Wei Lu. Analgesia effect of TENS on myofascial pain syndrome. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, dezembro de 2021. http://dx.doi.org/10.37766/inplasy2021.12.0090.
Texto completo da fonteNovotny, Vaclav, Junyung Kim, Terry Morton, Sarah Creasman e Daniel Mikkelson. Validation and Verification of TEDS Facility HYBRID Modeling. Office of Scientific and Technical Information (OSTI), setembro de 2023. http://dx.doi.org/10.2172/2299518.
Texto completo da fonteSolberg, Jason B. MIL-STD-1660 Tests on Tactical Explosive System (TEXS). Fort Belvoir, VA: Defense Technical Information Center, agosto de 1990. http://dx.doi.org/10.21236/ada247572.
Texto completo da fonteMiller, R. J., e C. R. Sampson. Evaluation of Simple Mesoscale Models for Use in TESS. Fort Belvoir, VA: Defense Technical Information Center, novembro de 1991. http://dx.doi.org/10.21236/ada247914.
Texto completo da fonteSolberg, Jason B. MIL-STD-1660 Tests on Tactical Explosive System (TEXS). Fort Belvoir, VA: Defense Technical Information Center, agosto de 1990. http://dx.doi.org/10.21236/ada257222.
Texto completo da fonte