Livros sobre o tema "Strains and stresses"

Szarliński, Jan. Stan naprężenia i obciążenie graniczne masywnych konstrukcji z betonu. Kraków: Politechnika Krakowska, 1989.

Canadian Society of Civil Engineers., ed. Traction stresses. [Montréal?: s.n., 1991.

L, Window A., ed. Strain gauge technology. 2^a ed. London: Elsevier Applied Science, 1992.

Archer, Robert R. Growth Stresses and Strains in Trees. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-662-02511-6.

Archer, Robert R. Growth stresses and strains in trees. Berlin: Springer-Verlag, 1987.

Deville, J. P. Stress and Strain in Epitaxy: Theoretical Concepts, Measurements and Applications. Burlington: Elsevier, 2001.

B, Fichter W., e Langley Research Center, eds. A finite-element alternating method for two-dimensional mode-I crack configurations. Hampton, Va: National Aeronautics ansd Space Administration, Langley Research Center, 1988.

Craver, W. Lionel. Vibration frequencies of tapered bars with nonclassical boundary conditions. El Paso, Tex: University of Texas at El Paso, Mechanical & Industrial Engineering Dept., 1988.

Mei, C. Multiple-mode nonlinear free and forced vibrations of beams using finite element method. Norfolk, Va: Old Dominion University Research Foundation, 1987.

Chamis, C. C. Simplified composite micromechanics for predicting microstresses. [Washington, D.C.]: National Aeronautics and Space Administration, 1986.

Halford, Gary R. Calculation of thermomechanical fatigue life based on isothermal behavior. [Washington, DC]: National Aeronautics and Space Administration, 1987.

Center, Langley Research, ed. Global/local stress analysis of composite structures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1989.

Mei, C. Multiple-mode nonlinear free and forced vibrations of beams using finite element method. Norfolk, Va: Old Dominion University Research Foundation, 1987.

B, Fichter W., e Langley Research Center, eds. A finite-element alternating method for two-dimensional mode-I crack configurations. Hampton, Va: National Aeronautics ansd Space Administration, Langley Research Center, 1988.

Choudhury, Dilara. Constitutional development in Bangladesh: Stresses and strains. Karachi: Oxford University Press, 1994.

International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (2009 Mito, Japan). Mechanical stress evaluation by neutrons and synchrotron radiation: Selected, peer reviewed papers from the MECA SENS V (The 5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation)/QuBS2009 (The 3rd International Symposium of Quantum Beam Science, Directorate of Japan Atomic Energy Agency), Mito 10-12 November 2009. Stafa-Zurich: Trans Tech, 2010.

Berger, John R. Study of static and dynamic fracture using strain measurements. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Chung, R. M. Development of an NBS polymer gage for dynamic soil stress measurement. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1985.

Berger, John R. Study of static and dynamic fracture using strain measurements. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Jost, G. S. Stresses and strains in a cold-worked annulus. Melbourne, Victoria, Australia: Aeronautical Research Laboratory, 1988.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., ed. Weld stresses beyond elastic limit: Materials discontinuity. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989.

Conference:, Stress Determination and Strain Measurement in Aeronautics Naval Architecture and Offshore Engineering (1988 University of Surrey). Stress determination and strain measurement in aeronautics, naval architecture and offshore engineering: 7th and 8th September 1988, two day conference, University of Surrey, Guildford. London: Royal Aeronautical Society, 1988.

N, Nemish I͡U. Napri͡azhennoe sostoi͡anie uprugikh t͡silindrov s vytochkami. Kiev: Nauk. dumka, 1987.

D, Zoback Mark, Healy J. H. 1929- e Geological Survey (U.S.), eds. In-situ stress measurements at Hi Vista, California: Continuation of a deep borehole profile near the San Andreas Fault. [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1987.

S, Sarkar, e Langley Research Center, eds. Statistical analysis of the rate of strain tensor in compressible homogeneous turbulence. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

DellaCorte, Christopher. An analysis of the wear behavior of SiC whisker reinforced alumnina from 25 to 1200C̊. [Washington, DC]: National Aeronautics and Space Administration, 1991.

D, Zoback Mark, Healy J. H. 1929- e Geological Survey (U.S.), eds. In-situ stress measurements at Hi Vista, California: Continuation of a deep borehole profile near the San Andreas Fault. [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1987.

S, Sarkar, e Langley Research Center, eds. Statistical analysis of the rate of strain tensor in compressible homogeneous turbulence. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Makhutov, Nikolaĭ Andreevich. Konstrukt︠s︡ionnai︠a︡ prochnostʹ, resurs i tekhnogennai︠a︡ bezopasnostʹ: V dvukh chasti︠a︡kh. Novosibirsk: Nauka, 2005.

S, Sarkar, e Langley Research Center, eds. Statistical analysis of the rate of strain tensor in compressible homogeneous turbulence. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Center, Langley Research, ed. An interferometric strain/displacement measurement system. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1989.

Kanarchuk, Vadim Evgenʹevich. Adaptat͡s︡ii͡a︡ materialov k dinamicheskim vozdeĭstvii͡a︡m. Kiev: Nauk. dumka, 1986.

Hickman, S. H. In-situ stress measurements at Hi Vista, California: Continuation of a deep borehole profile near the San Andreas Fault. [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1987.

DellaCorte, Christopher. An analysis of the wear behavior of SiC whisker reinforced alumnina from 25 to 1200C̊. [Washington, DC]: National Aeronautics and Space Administration, 1991.

Weaver, Smith Suzanne, Lim Tae W e Langley Research Center, eds. Underlying modal data issues for detecting damage in truss structures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1992.

Lei, Jih-Fen. High temperature strain measurement with a resistance strain gage. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Tanaka, Chihiro. Sutoresu wa suterareru =: Stress zero. Tōkyō: Chūkei Shuppan, 2009.

Ugural, A. C. Stresses in plates and shells. 2^a ed. Boston, Mass: WCB/McGraw Hill, 1998.

W, Dally James, ed. Experimental solid mechanics. Knoxville, Tenn: College House Enterprises, 2010.

W, Dally James, ed. Experimental solid mechanics. Knoxville, Tennessee: College House Enterprises, 2014.

Teisseyre, R. Naprężenia we wnętrzu Ziemi =: Stresses in the Earth's interior. Warszawa: Państwowe Wydawn. Nauk., 1988.

T, Herakovich Carl, e United States. National Aeronautics and Space Administration., eds. An approximate solution for interlaminar stresses in laminated composites. Charlottesville, Va: School of Engineering and Applied Science, Applied Mechanics Program, University of Virginia, 1992.

Maan, Jawad. External pressure design in creep range. New York, N.Y: ASME Standards Technology, LLC, 2009.

Asayama, Tai. Creep-fatigue data and existing evaluation procedures for grade 91 and hastelloy XR. New York, N.Y: ASME Standards Technology, LLC, 2009.

Upitis, Elmar. Guaranteed higher strength properties. New York, N.Y: ASME Standards Technology, LLC, 2009.

Charles, Becht. Extend fatigue exemption rules for low CR alloys into the time-dependent range for section VIII DIV 2 construction. New York, N.Y: ASME Standards Technology, LLC, 2009.

Hsu, Teng H. Stress and strain data handbook. Houston: Gulf Pub. Co., Book Division, 1986.

Sandland, Knut Magnar. Stress and strain in drying wood - a literature survey. Oslo: Norsk Treteknisk Institutt, 1996.

Lesik, Dale F. Ultimate strength of eccentrically loaded fillet welded connections. Edmonton, Alta: Dept. of Civil Engineering, University of Alberta, 1988.

Advanced, measurement techniques (Conference) (1987 London England). Applications of advanced strain measurement techniques.. Caithness: Whittles, 1988.