Siga este link para ver outros tipos de publicações sobre o tema: Split-window algorithm.
Artigos de revistas sobre o tema "Split-window algorithm"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Split-window algorithm".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
1
Pinker, Rachel T., Donglian Sun, Meng-Pai Hung, Chuan Li e Jeffrey B. Basara. "Evaluation of Satellite Estimates of Land Surface Temperature from GOES over the United States". Journal of Applied Meteorology and Climatology 48, n.º 1 (1 de janeiro de 2009): 167–80. http://dx.doi.org/10.1175/2008jamc1781.1.
Texto completo da fonteResumo:
Abstract A comprehensive evaluation of split-window and triple-window algorithms to estimate land surface temperature (LST) from Geostationary Operational Environmental Satellites (GOES) that were previously described by Sun and Pinker is presented. The evaluation of the split-window algorithm is done against ground observations and against independently developed algorithms. The triple-window algorithm is evaluated only for nighttime against ground observations and against the Sun and Pinker split-window (SP-SW) algorithm. The ground observations used are from the Atmospheric Radiation Measurement Program (ARM) Central Facility, Southern Great Plains site (April 1997–March 1998); from five Surface Radiation Budget Network (SURFRAD) stations (1996–2000); and from the Oklahoma Mesonet. The independent algorithms used for comparison include the National Oceanic and Atmospheric Administration/National Environmental Satellite, Data and Information Service operational method and the following split-window algorithms: that of Price, that of Prata and Platt, two versions of that of Ulivieri, that of Vidal, two versions of that of Sobrino, that of Coll and others, the generalized split-window algorithm as described by Becker and Li and by Wan and Dozier, and the Becker and Li algorithm with water vapor correction. The evaluation against the ARM and SURFRAD observations indicates that the LST retrievals from the SP-SW algorithm are in closer agreement with the ground observations than are the other algorithms tested. When evaluated against observations from the Oklahoma Mesonet, the triple-window algorithm is found to perform better than the split-window algorithm during nighttime.
2
Meng, Xiangchen, Jie Cheng, Shaohua Zhao, Sihan Liu e Yunjun Yao. "Estimating Land Surface Temperature from Landsat-8 Data using the NOAA JPSS Enterprise Algorithm". Remote Sensing 11, n.º 2 (15 de janeiro de 2019): 155. http://dx.doi.org/10.3390/rs11020155.
Texto completo da fonteResumo:
Land surface temperature (LST) is one of the key parameters in hydrology, meteorology, and the surface energy balance. The National Oceanic and Atmospheric Administration (NOAA) Joint Polar Satellite System (JPSS) Enterprise algorithm is adapted to Landsat-8 data to obtain the estimate of LST. The coefficients of the Enterprise algorithm were obtained by linear regression using the analog data produced by comprehensive radiative transfer modeling. The performance of the Enterprise algorithm was first tested by simulation data and then validated by ground measurements. In addition, the accuracy of the Enterprise algorithm was compared to the generalized split-window algorithm and the split-window algorithm of Sobrino et al. (1996). The validation results indicate the Enterprise algorithm has a comparable accuracy to the other two split-window algorithms. The biases (root mean square errors) of the Enterprise algorithm were 1.38 (3.22), 1.01 (2.32), 1.99 (3.49), 2.53 (3.46), and −0.15 K (1.11 K) at the SURFRAD, HiWATER_A, HiWATER_B, HiWATER_C sites and BanGe site, respectively, whereas those values were 1.39 (3.20), 1.0 (2.30), 1.93 (3.48), 2.53 (3.35), and −0.35 K (1.16 K) for the generalized split-window algorithm, 1.45 (3.39), 1.08 (2.41), 2.16 (3.67), 2.52 (3.58), and 0.02 K (1.12 K) for the split-window algorithm of Sobrino, respectively. This study provides an alternative method to estimate LST from Landsat-8 data.
3
Wang, Lijuan, Ni Guo, Wei Wang e Hongchao Zuo. "Optimization of the Local Split-Window Algorithm for FY-4A Land Surface Temperature Retrieval". Remote Sensing 11, n.º 17 (27 de agosto de 2019): 2016. http://dx.doi.org/10.3390/rs11172016.
Texto completo da fonteResumo:
FY-4A is a second generation of geostationary orbiting meteorological satellite, and the successful launch of FY-4A satellite provides a new opportunity to obtain diurnal variation of land surface temperature (LST). In this paper, different underlying surfaces-observed data were applied to evaluate the applicability of the local split-window algorithm for FY-4A, and the local split-window algorithm parameters were optimized by the artificial intelligent particle swarm optimization (PSO) algorithm to improve the accuracy of retrieved LST. Results show that the retrieved LST can efficiently reproduce the diurnal variation characteristics of LST. However, the estimated values deviate hugely from the observed values when the local split-window algorithms are directly used to process the FY-4A satellite data, and the root mean square errors (RMSEs) are approximately 6K. The accuracy of the retrieved LST cannot be effectively improved by merely modifying the emissivity-estimated model or optimizing the algorithm. Based on the measured emissivity, the RMSE of LST retrieved by the optimized local split-window algorithm is reduced to 3.45 K. The local split-window algorithm is a simple and easy retrieval approach that can quickly retrieve LST on a regional scale and promote the application of FY-4A satellite data in related fields.
4
Vincent, R. F. "The Case for a Single Channel Composite Arctic Sea Surface Temperature Algorithm". Remote Sensing 11, n.º 20 (16 de outubro de 2019): 2393. http://dx.doi.org/10.3390/rs11202393.
Texto completo da fonteResumo:
Surface temperatures derived from satellite thermal infrared (TIR) data are critical inputs for assessing climate change in polar environments. Sea and ice surface temperature (SST, IST) are commonly determined with split window algorithms that use the brightness temperature from the 11 μm channel (BT11) as the main estimator and the difference between BT11 and the 12 μm channel (BTD11–12) to correct for atmospheric water vapor absorption. An issue with this paradigm in the Arctic maritime environment is the occurrence of high BTD11–12 that is not indicative of atmospheric absorption of BT11 energy. The Composite Arctic Sea Surface Temperature Algorithm (CASSTA) considers three regimes based on BT11 pixel value: seawater, ice, and marginal ice zones. A single channel (BT11) estimator is used for SST and a split window algorithm for IST. Marginal ice zone temperature is determined with a weighted average between the SST and IST. This study replaces the CASSTA split window IST with a single channel (BT11) estimator to reduce errors associated with BTD11–12 in the split window algorithm. The single channel IST returned improved results in the CASSTA dataset with a mean average error for ice and marginal ice zones of 0.142 K and 0.128 K, respectively.
5
Peng, Hong Chun, Hai Ying Li e Hao Gao. "Study on Methods of Retrieval of Sea Surface Temperature by Using Remote Sensing Data". Advanced Materials Research 610-613 (dezembro de 2012): 3742–46. http://dx.doi.org/10.4028/www.scientific.net/amr.610-613.3742.
Texto completo da fonteResumo:
This article taking coastal waters of Lianyungang as the research area, and by using MODIS images during 15 April and 1 May, 2012 as source data, and the results of sea surface temperature were extracted by band operation, and by using changes in the different time of SST, spatial variation and comparative analysis to verify the accuracy of the two algorithms. Both the two split-window algorithm can get the sea surface temperature of coastal waters of Lianyungang well, and the result was reliable, and the inversion precision of SST can meet the application requirements in the general ocean applications. Not enough is the two split-window algorithm only worked under clear sky conditions, and can not get the sea surface temperature where the sea under cloud; at the zone of connected to the land and sea, universal SST algorithm was not as good as the Qin Zhihao split-window algorithm, but it has a few parameters, and the advantages of easy operation process of the desired intermediate.
6
Pérez-Planells, Lluís, Raquel Niclòs, Jesús Puchades, César Coll, Frank-M. Göttsche, José A. Valiente, Enric Valor e Joan M. Galve. "Validation of Sentinel-3 SLSTR Land Surface Temperature Retrieved by the Operational Product and Comparison with Explicitly Emissivity-Dependent Algorithms". Remote Sensing 13, n.º 11 (7 de junho de 2021): 2228. http://dx.doi.org/10.3390/rs13112228.
Texto completo da fonteResumo:
Land surface temperature (LST) is an essential climate variable (ECV) for monitoring the Earth climate system. To ensure accurate retrieval from satellite data, it is important to validate satellite derived LSTs and ensure that they are within the required accuracy and precision thresholds. An emissivity-dependent split-window algorithm with viewing angle dependence and two dual-angle algorithms are proposed for the Sentinel-3 SLSTR sensor. Furthermore, these algorithms are validated together with the Sentinel-3 SLSTR operational LST product as well as several emissivity-dependent split-window algorithms with in-situ data from a rice paddy site. The LST retrieval algorithms were validated over three different land covers: flooded soil, bare soil, and full vegetation cover. Ground measurements were performed with a wide band thermal infrared radiometer at a permanent station. The coefficients of the proposed split-window algorithm were estimated using the Cloudless Land Atmosphere Radiosounding (CLAR) database: for the three surface types an overall systematic uncertainty (median) of −0.4 K and a precision (robust standard deviation) 1.1 K were obtained. For the Sentinel-3A SLSTR operational LST product, a systematic uncertainty of 1.3 K and a precision of 1.3 K were obtained. A first evaluation of the Sentinel-3B SLSTR operational LST product was also performed: systematic uncertainty was 1.5 K and precision 1.2 K. The results obtained over the three land covers found at the rice paddy site show that the emissivity-dependent split-window algorithms, i.e., the ones proposed here as well as previously proposed algorithms without angular dependence, provide more accurate and precise LSTs than the current version of the operational SLSTR product.
7
Na, Yin Tai. "Study on the Application and Comparative Analysis of Land Surface Temperature Retrieval Method Based on Multi-Sensor Remote Sensing Data". Advanced Materials Research 1010-1012 (agosto de 2014): 1276–79. http://dx.doi.org/10.4028/www.scientific.net/amr.1010-1012.1276.
Texto completo da fonteResumo:
The three commonly used remote sensing land surface temperature retrieval methods are described, namely single-window algorithm, split window algorithm and multi-channel algorithm, which have their advantages and disadvantages. The land surface temperature (LST) of study area was retrieved with multi-source remote sensing data. LST of study area was retrieved with the split window algorithm on January 10, 2003 and November 19, 2003 which is comparatively analyzed with the LST result of ETM+data with the single-window algorithm and the LST result of ASTER data with multi channel algorithm in the same period. The results show that land surface temperature of different land features are significantly different, where the surface temperature of urban land is the highest, and that of rivers and lakes is the lowest, followed by woodland. It is concluded that the expansion of urban green space and protection of urban water can prevent or diminish the urban heat island.
8
Gerace, Aaron, Tania Kleynhans, Rehman Eon e Matthew Montanaro. "Towards an Operational, Split Window-Derived Surface Temperature Product for the Thermal Infrared Sensors Onboard Landsat 8 and 9". Remote Sensing 12, n.º 2 (9 de janeiro de 2020): 224. http://dx.doi.org/10.3390/rs12020224.
Texto completo da fonteResumo:
The split window technique has been used for over thirty years to derive surface temperatures of the Earth with image data collected from spaceborne sensors containing two thermal channels. The latest NASA/USGS Landsat satellites contain the Thermal Infrared Sensor (TIRS) instruments that acquire Earth data in two longwave infrared bands, as opposed to a single band with earlier Landsats. The United States Geological Survey (USGS) will soon begin releasing a surface temperature product for Landsats 4 through 8 based on the single spectral channel methodology. However, progress is being made toward developing and validating a more accurate and less computationally intensive surface temperature product based on the split window method for Landsat 8 and 9 datasets. This work presents the progress made towards developing an operational split window algorithm for TIRS. Specifically, details of how the generalized split window algorithm was tailored for the TIRS sensors are presented, along with geometric considerations that should be addressed to avoid spatial artifacts in the final surface temperature product. Validation studies indicate that the proposed algorithm is accurate to within 2 K when compared to land-based measurements and to within 1 K when compared to water-based measurements, highlighting the improved accuracy that may be achieved over the current single-channel methodology being used to derive surface temperature in the Landsat Collection 2 surface temperature product. Surface temperature products using the split window methodologies described here can be made available upon request for testing purposes.
9
Sun, Donglian, Yunyue Yu, Li Fang e Yuling Liu. "Toward an Operational Land Surface Temperature Algorithm for GOES". Journal of Applied Meteorology and Climatology 52, n.º 9 (setembro de 2013): 1974–86. http://dx.doi.org/10.1175/jamc-d-12-0132.1.
Texto completo da fonteResumo:
AbstractFor most land surface temperature (LST) regression algorithms, a set of optimized coefficients is determined by manual separation of the different subdivisions of atmospheric and surface conditions. In this study, a machine-learning technique, the regression tree (RT) technique, is introduced with the aim of automatically finding these subranges and the thresholds for the stratification of regression coefficients. The use of RT techniques in LST retrieval has the potential to contribute to the determination of optimal regression relationships under different conditions. Because of the lack of split-window channels for the Geostationary Operational Environmental Satellite (GOES) M–Q series (GOES-12–GOES-15, plus GOES-Q), a dual-window LST algorithm was developed by combining the infrared 11-μm channel with the shortwave-infrared (SWIR) 3.9-μm channel, which presents lower atmospheric absorption than does the infrared split-window channels (11 and 12 μm). The RT technique was introduced to derive the regression models under different conditions. The algorithms were used to derive the LST product from GOES observations and were evaluated against the 2004 Surface Radiation budget network. The results indicate that the RT technique outperforms the traditional regression method.
10
Heidinger, Andrew K., e Michael J. Pavolonis. "Gazing at Cirrus Clouds for 25 Years through a Split Window. Part I: Methodology". Journal of Applied Meteorology and Climatology 48, n.º 6 (1 de junho de 2009): 1100–1116. http://dx.doi.org/10.1175/2008jamc1882.1.
Texto completo da fonteResumo:
Abstract This paper demonstrates that the split-window approach for estimating cloud properties can improve upon the methods commonly used for generating cloud temperature and emissivity climatologies from satellite imagers. Because the split-window method provides cloud properties that are consistent for day and night, it is ideally suited for the generation of a cloud climatology from the Advanced Very High Resolution Radiometer (AVHRR), which provides sampling roughly four times per day. While the split-window approach is applicable to all clouds, this paper focuses on its application to cirrus (high semitransparent ice clouds), where this approach is most powerful. An optimal estimation framework is used to extract estimates of cloud temperature, cloud emissivity, and cloud microphysics from the AVHRR split-window observations. The performance of the split-window approach is illustrated through the diagnostic quantities generated by the optimal estimation approach. An objective assessment of the performance of the algorithm cloud products from the recently launched space lidar [Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation/Cloud-Aerosol Lidar with Orthogonal Polarization (CALIPSO/CALIOP)] is used to characterize the performance of the AVHRR results and also to provide the constraints needed for the optimal estimation approach.
11
Guo, Jinxin, Huazhong Ren, Yitong Zheng, Shangzong Lu e Jiaji Dong. "Evaluation of Land Surface Temperature Retrieval from Landsat 8/TIRS Images before and after Stray Light Correction Using the SURFRAD Dataset". Remote Sensing 12, n.º 6 (22 de março de 2020): 1023. http://dx.doi.org/10.3390/rs12061023.
Texto completo da fonteResumo:
Landsat 8/thermal infrared sensor (TIRS) is suffering from the problem of stray light that makes an inaccurate radiance for two thermal infrared (TIR) bands and the latest correction was conducted in 2017. This paper focused on evaluation of land surface temperature (LST) retrieval from Landsat 8 before and after the correction using ground-measured LST from five surface radiation budget network (SURFRAD) sites. Results indicated that the correction increased the band radiance at the top of the atmosphere for low temperature but decreased such radiance for high temperature. The root-mean-square error (RMSE) of LST retrieval decreased by 0.27 K for Band 10 and 0.78 K for Band 11 using the single-channel algorithm. For the site with high temperature, the LST retrieval RMSE of the single-channel algorithm for Band 11 even reduced by 1.4 K. However, the accuracy of two of three split-window algorithms adopted in this paper decreased. After correction, the single-channel algorithm for Band 10 and the linear split-window algorithm had the least RMSE (approximately 2.5 K) among five adopted algorithms. Moreover, besides SURFRAD sites, it is necessary to validate using more robust and homogeneous ground-measured datasets to help solely clarify the effect of the correction on LST retrieval.
12
Chen, Zongyi, Mingkang Yang, Yijun Guo, Yu Liang, Yifan Ding e Li Wang. "The Split Delivery Vehicle Routing Problem with Three-Dimensional Loading and Time Windows Constraints". Sustainability 12, n.º 17 (27 de agosto de 2020): 6987. http://dx.doi.org/10.3390/su12176987.
Texto completo da fonteResumo:
Besides routing and packing plans, synthetically considering the requirements of customers about service time is absolutely necessary. An order split delivery plan can not only better satisfy the service time requirements, but also improve the full-load rate of vehicles. The split delivery vehicle routing problem with three-dimensional loading constraints (3L-SDVRP) combines vehicle routing and three-dimensional loading with additional packing constraints. In the 3L-SDVRP splitting deliveries of customers is basically possible, i.e., a customer can be visited in two or more tours. The vehicle routing problem with three-dimensional loading constraints that are based on the time window and considering split delivery of orders (3L-CVRPTWSDO) and its optimization algorithm are studied in this paper. We established mathematical model of the problem and designed the tabu search algorithm. Based on the examples used in Gendreau et al. (2006), examples was constructed to test our algorithm. The experimental results have expressed that, in the 3L-CVRP problem, the results of split delivery is better than those of non-split delivery, and it is easier to satisfy the time window constraints. The algorithm in this paper generates high quality solutions, it provides a effective method to solve the 3L-CVRPTWSDO problems.
13
Ulivieri, C., M. M. Castronuovo, R. Francioni e A. Cardillo. "A split window algorithm for estimating land surface temperature from satellites". Advances in Space Research 14, n.º 3 (março de 1994): 59–65. http://dx.doi.org/10.1016/0273-1177(94)90193-7.
Texto completo da fonte
14
Kalogeropoulos, Georgios, Julia Tzortzi e Argiro Dimoudi. "Remote Sensing and Field Measurements for the Analysis of the Thermal Environment in the “Bosco Verticale” Area in Milan City". Land 13, n.º 2 (3 de fevereiro de 2024): 182. http://dx.doi.org/10.3390/land13020182.
Texto completo da fonteResumo:
The trend of urbanization nowadays has caused serious issues related to climate. One of the most important ones is that of the ‘Urban Heat Island (UHI)’ and it occurs in major cities throughout the world. The most important categories, and therefore the most studied ones, are the canopy urban heat island (CUHI) and surface heat island (SUHI). The aim and the novelty of the current study was to assess different remote sensing approaches to detect the thermal environment of an open area inside a large city. The study was undertaken in an urban area with green spaces, in the Bosco Verticale area in the city of Milan, during the spring and summer period of 2021. The area is characterized by different types of cover materials, which were investigated in terms of surface temperature under shaded and non-shaded conditions. Both field measurements and remote sensing techniques were applied. Remote sensing techniques included downscaling techniques and the usage of different split-window algorithms applied on the Landsat8 satellite sensor data. The land surface temperature (LST) extracted from remote sensing methods was compared with the surface temperature derived from in situ measurements. For the needs of the study, both in situ measurements and the collection of meteorological data from different fixed meteorological stations throughout the city of Milan were carried out. The results revealed the significance of greenery presence inside the urban environment, as a comparison of the meteorological data across the urban area of Milan showed that the areas with a low presence of greenery were found to be warmer than those with a higher presence of green elements. Concerning the field measurements in the study area, the results showed a significant reduction in both surface and air temperature in shaded places. On the other hand, the presence of conventional artificial materials in sunny areas led to relatively high values of both surface and air temperature. The downscaling method showed satisfying results in terms of average LST values; however, some discrepancies appeared in terms of the RMSE index. The application of split-window algorithms has shown that some forms of the ‘Generalized split-window algorithm’ and some forms of the ‘Jimenez-Munoz algorithm’ presented better performance among the studied algorithms. Comparing the LST values derived from the most representative algorithm, the ‘Du, Wan algorithm’, with those derived from downscaling methods, it was found to be quite close. However, under shaded conditions, the results derived from the ‘Split-window algorithm’ were found to be more precise. The application of remote sensing techniques in microscale in urban regions should be further studied in future, as they could be an essential tool for observing microclimatic conditions in urban areas and on building scale.
15
Susilo, Eko, Rizki Hanintyo e Adi Wijaya. "RETRIEVING COASTAL SEA SURFACE TEMPERATURE FROM LANDSAT-8 TIRS FOR WANGI-WANGI ISLAND, WAKATOBI, SOUTHEAST SULAWESI, INDONESIA". International Journal of Remote Sensing and Earth Sciences (IJReSES) 16, n.º 1 (23 de outubro de 2019): 13. http://dx.doi.org/10.30536/j.ijreses.2019.v16.a3044.
Texto completo da fonteResumo:
The new Landsat generation, Landsat-8, is equipped with two bands of thermal infrared sensors (TIRS). The presence of two bands provides for improved determination of sea surface temperature (SST) compared to existing products. Due to its high spatial resolution, it is suitable for coastal zone monitoring. However, there are still significant challenges in converting radiance measurements to SST, resulting from the limitations of in-situ measurements. Several studies into developing SST algorithms in Indonesia waters have provided good performance. Unfortunately, however, they have used a single-band windows approach, and a split-windows approach has yet to be reported. In this study, we investigate both single-band and split-window algorithms for retrieving SST maps in the coastal zone of Wangi-Wangi Island, Wakatobi, Southeast Sulawesi, Indonesia. Landsat-8 imagery was acquired on February 26, 2016 (01: 51: 44.14UTC) at position path 111 and and row 64. On the same day, in-situ SST was measured by using Portable Multiparameter Water Quality Checker – 24. We used the coefficient of correlation (r) and root mean square error (RMSE) to determine the best algorithm performance by incorporating in-situ data and the estimated SST map. The results showed that there were differences in brightness temperature retrieved from TIRS band10 and band 11. The single-band algorithm based on band 10 for Poteran Island clearly showed superior performance (r = 69.28% and RMSE = 0.7690°C). This study shows that the split-window algorithm has not yet produced a accurate result for the study area.
16
Şekertekin, A., Ş. H. Kutoglu, S. Kaya e A. M. Marangoz. "ANALYSING THE EFFECTS OF DIFFERENT LAND COVER TYPES ON LAND SURFACE TEMPERATURE USING SATELLITE DATA". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XL-1-W5 (11 de dezembro de 2015): 665–67. http://dx.doi.org/10.5194/isprsarchives-xl-1-w5-665-2015.
Texto completo da fonteResumo:
Monitoring Land Surface Temperature (LST) via remote sensing images is one of the most important contributions to climatology. LST is an important parameter governing the energy balance on the Earth and it also helps us to understand the behavior of urban heat islands. There are lots of algorithms to obtain LST by remote sensing techniques. The most commonly used algorithms are split-window algorithm, temperature/emissivity separation method, mono-window algorithm and single channel method. In this research, mono window algorithm was implemented to Landsat 5 TM image acquired on 28.08.2011. Besides, meteorological data such as humidity and temperature are used in the algorithm. Moreover, high resolution Geoeye-1 and Worldview-2 images acquired on 29.08.2011 and 12.07.2013 respectively were used to investigate the relationships between LST and land cover type. As a result of the analyses, area with vegetation cover has approximately 5 ºC lower temperatures than the city center and arid land., LST values change about 10 ºC in the city center because of different surface properties such as reinforced concrete construction, green zones and sandbank. The temperature around some places in thermal power plant region (ÇATES and ZETES) Çatalağzı, is about 5 ºC higher than city center. Sandbank and agricultural areas have highest temperature due to the land cover structure.
17
El Makhloufi, Assaad, Nisrine Chekroun, Noha Tagmouti, Samir El Adib e Naoufal Raissouni. "Improvements in space radiation-tolerant FPGA implementation of land surface temperature-split window algorithm". International Journal of Electrical and Computer Engineering (IJECE) 11, n.º 5 (1 de outubro de 2021): 3844. http://dx.doi.org/10.11591/ijece.v11i5.pp3844-3854.
Texto completo da fonteResumo:
The trend in satellite remote sensing assignments has continuously been concerning using hardware devices with more flexibility, smaller size, and higher computational power. Therefore, field programmable gate arrays (FPGA) technology is often used by the developers of the scientific community and equipment for carrying out different satellite remote sensing algorithms. This article explains hardware implementation of land surface temperature split window (LST-SW) algorithm based on the FPGA. To get a high-speed process and real-time application, VHSIC hardware description language (VHDL) was employed to design the LST-SW algorithm. The paper presents the benefits of the used Virtex-4QV of radiation tolerant series FPGA. The experimental results revealed that the suggested implementation of the algorithm using Virtex4QV achieved higher throughput of 435.392 Mbps, and faster processing time with value of 2.95 ms. Furthermore, a comparison between the proposed implementation and existing work demonstrated that the proposed implementation has better performance in terms of area utilization; 1.17% reduction in number of Slice used and 1.06% reduction in of LUTs. Moreover, the significant advantage of area utilization would be the none use of block RAMs comparing to existing work using three blocks RAMs. Finally, comparison results show improvements using the proposed implementation with rates of 2.28% higher frequency, 3.66 x higher throughput, and 1.19% faster processing time.
18
Lamedjogue, L., C. Adama, B. Ousmane, T. Kokou e D. Moustapha. "MULTI-COMPARTMENT VEHICLES FOR SPLIT PICK-UP AND SPLIT DELIVERY PROBLEM WITH TIME WINDOW". Advances in Mathematics: Scientific Journal 12, n.º 10 (18 de outubro de 2023): 887–919. http://dx.doi.org/10.37418/amsj.12.10.4.
Texto completo da fonteResumo:
In this article, we'll look at multi-compartment vehicles, which collect goods from suppliers and deliver them to different customers who place large orders. Because some products are incompatible with each other, these goods cannot be transported by single-compartment vehicles. In addition, because customers can place large orders, some suppliers and/or customers may be visited several times by different vehicles. In this work, the aim is to satisfy a group of customers while respecting the constraints linked to the capacity of each compartment and each type of product, and to ensure that each supplier is visited before the customer. Our first step is to model our problem mathematically and then solve it using an approximate method. Given its complexity, we use the genetic algorithm to solve the problem of split pick-up and delivery with time windows by multi-compartment vehicles. Our model allows us to determine a minimum distance and a minimum cost using a reasonable number of vehicles.
19
Jiang, G. ‐M, e Z. ‐L Li. "Split‐window algorithm for land surface temperature estimation from MSG1‐SEVIRI data". International Journal of Remote Sensing 29, n.º 20 (20 de setembro de 2008): 6067–74. http://dx.doi.org/10.1080/01431160802235860.
Texto completo da fonte
20
Yoon, Yeo, Woo Jeong e Kwang Lee. "Window Material Daylighting Performance Assessment Algorithm: Comparing Radiosity and Split-Flux Methods". Energies 7, n.º 4 (14 de abril de 2014): 2362–76. http://dx.doi.org/10.3390/en7042362.
Texto completo da fonte
21
Zhengming Wan e J. Dozier. "A generalized split-window algorithm for retrieving land-surface temperature from space". IEEE Transactions on Geoscience and Remote Sensing 34, n.º 4 (julho de 1996): 892–905. http://dx.doi.org/10.1109/36.508406.
Texto completo da fonte
22
Liu, Yu, Yongxin Wang e Guanghui Wang. "Land Surface Temperature Retrieval From GF5-01A Based on Split- Window Algorithm". International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLVIII-1-2024 (10 de maio de 2024): 431–36. http://dx.doi.org/10.5194/isprs-archives-xlviii-1-2024-431-2024.
Texto completo da fonteResumo:
Abstract. Land Surface temperature (LST) is a core parameter in the energy exchange between the surface and the atmosphere, and the use of thermal infrared remote sensing can realize the wide-range, fast, and accurate acquisition of surface temperature. GF5-01A is an important part and the final satellite of the major special project on high-resolution Earth observation system which is equipped with a wide-area thermal infrared imager with a resolution of 100 meters and a width of 1,500 kilometers. In this paper, based on the GF5-01A WTI spectral response function, combined with the TIGR2000 atmospheric profiles data and the ASTER spectral library, the data simulation was carried out by using the atmospheric radiative transfer model MODTRAN 5.2, and then constructed the split-window algorithm. Then, the method proposed in this paper was validated and evaluated using Landsat 8/9 temperature products and measured surface temperature data from SURFRAD sites acquired on the same day. The results show that the RMSE between the GF5-01A retrieved LST and the Landsat8/9 retrieved LST is between 1.27–2.24K, and the Bias is between −2.08–1.12K. The RMSE is between 0.68–2.64K and the bias is between −0.68–1.49K compared to the measured surface temperature. The split-window algorithm of GF5-01A proposed in this paper can meet the requirements of thermal infrared remote sensing monitoring and has enormous potential and value.
23
Wang, Lei, Yao Lu e Yunlong Yao. "Comparison of Three Algorithms for the Retrieval of Land Surface Temperature from Landsat 8 Images". Sensors 19, n.º 22 (19 de novembro de 2019): 5049. http://dx.doi.org/10.3390/s19225049.
Texto completo da fonteResumo:
The successful launch of the Landsat 8 satellite provides important data for the monitoring of urban heat island effects. Since the Landsat 8 TIRS data has two thermal infrared bands, it is suitable for many algorithms to retrieve the land surface temperature (LST). However, the selection of algorithms for retrieving the LST, the acquisition of algorithm input parameters, and the verification of the results are problems without obvious solutions. Taking Changchun City as an example, this paper used the mono-window algorithm (MWA), the split window algorithm (SWA), and the single-channel (SC) method to extract the LST from the Landsat 8 image and compared the three algorithms in terms of input parameters, accuracy, and sensitivity. The results show that all three algorithms can achieve good results in retrieving the LST. The SWA is the least sensitive to the error of the input parameters. The MWA and the SC method are sensitive to the error of the input parameters, and compared with the error of the LSE, these two algorithms are more sensitive to the error of atmospheric water vapor content. In addition, the MWA is also very sensitive to the error of the effective mean atmospheric temperature.
24
Su, Qinghua, Xiangchen Meng e Lin Sun. "Investigation and Validation of Split-Window Algorithms for Estimating Land Surface Temperature from Landsat 9 TIRS-2 Data". Remote Sensing 16, n.º 19 (29 de setembro de 2024): 3633. http://dx.doi.org/10.3390/rs16193633.
Texto completo da fonteResumo:
Land surface temperature (LST) is important in a variety of applications, such as urban thermal environment monitoring and water resource management. In this paper, eleven candidate split-window (SW) algorithms were adapted to Thermal Infrared Sensor-2 (TIRS-2) data of the Landsat 9 satellite for estimating the LST. The simulated dataset produced by extensive radiative transfer modeling and five global atmospheric profile databases was used to determine the SW algorithm coefficients. Ground measurements gathered at Surface Radiation Budget Network sites were used to confirm the efficiency of the SW algorithms after their performance was initially examined using the independent simulation dataset. Five atmospheric profile databases perform similarly in training accuracy under various subranges of total water vapor. The candidate SW algorithms demonstrate superior performance compared to the radiative transfer equation algorithm, exhibiting a reduction in overall bias and RMSE by 1.30 K and 1.0 K, respectively. It is expected to provide guidance for the generation of the Landsat 9 LST using the SW algorithms.
25
Peng, Bo, Wei Chen, Hengyang Wang, Xiuqing Hu, Hongzhao Tang, Guangchao Li e Fengjiao Zhang. "Retrieval of an On-Orbit Bidirectional Reflectivity Reference in the Mid-Infrared Bands of FY-3D/MERSI-2 Channels 20". Remote Sensing 15, n.º 21 (26 de outubro de 2023): 5117. http://dx.doi.org/10.3390/rs15215117.
Texto completo da fonteResumo:
The acquisition of high-accuracy reflectance in mid-infrared channels is of great significance for the on-orbit cross-calibration of other bands using the mid-infrared band. However, due to the phenomenon that some sensors have a wide range of wavelengths covered by adjacent channels in the mid-infrared band, the traditional method of estimating the mid-infrared reflectivity assumes that the sea surface reflectivity in different mid-infrared bands is equal, which will lead to a large error during calculation. To solve this problem, this study proposes a nonlinear split-window algorithm involving ocean sun glint data to retrieve reflectivity of FY-3D/MERSI-2 channels 20. The results show that the variation range of sea surface reflectivity of channel 20 in the glint area is 10~25%, the mean value of the reflectivity difference obtained by the nonlinear split-window algorithm is 0.27%, and the RMSE is 0.0066. Among the main influencing factors, the atmospheric conditions have the greatest impact, and the effects of the uncertainties in the water vapor content and aerosol optical thickness on the calculation results are 1.16% and 0.34%, respectively. The initial value limits of the mid-infrared sea surface reflectivity also contribute approximately 0.84%, and their contribution to the uncertainty represents one of the main components. This work shows that the nonlinear split-window algorithm can calculate the infrared sea surface reflectivity with high accuracy and can be used as a reference for in-orbit cross-calibration between different bands.
26
Bunai, Tasya, Rokhmatuloh e Adi Wibowo. "Comparison Spatial Pattern of Land Surface Temperature with Mono Window Algorithm and Split Window Algorithm: A Case Study in South Tangerang, Indonesia". IOP Conference Series: Earth and Environmental Science 149 (maio de 2018): 012066. http://dx.doi.org/10.1088/1755-1315/149/1/012066.
Texto completo da fonte
27
Gangwar, Rishi Kumar, e Pradeep Kumar Thapliyal. "Variational Based Estimation of Sea Surface Temperature from Split-Window Observations of INSAT-3D/3DR Imager". Remote Sensing 12, n.º 19 (24 de setembro de 2020): 3142. http://dx.doi.org/10.3390/rs12193142.
Texto completo da fonteResumo:
Infrared (IR) radiometers from geostationary (GEO) satellites have an advantage over low-earth orbiting (LEO) satellites as they provide continuous observations to monitor the diurnal variations in the sea surface temperature (SST), typically better than 30-minute interval. However, GEO satellite observations suffer from significant diurnal and seasonal biases arising due to varying sun-earth-satellite geometry, leading to biases in SST estimates from conventional non-linear regression-based algorithms (NLSST). The midnight calibration issue occurring in GEO sensors poses a different challenge altogether. To mitigate these issues, we propose SST estimation from split-window IR observations of INSAT-3D and 3DR Imagers using One-Dimensional Variational (1DVAR) scheme. Prior to SST estimation, the bias correction in Imager observations is carried out using cumulative density function (CDF) matching. Then NLSST and 1DVAR algorithms were applied on six months of INSAT-3D/3DR observations to retrieve the SST. For the assessment of the developed algorithms, the retrieved SST was validated against in-situ SST measurements available from in-situ SST Quality Monitor (iQuam) for the study period. The quantitative assessment confirms the superiority of the 1DVAR technique over the NLSST algorithm. However, both the schemes under-estimate the SST as compared to in-situ SST, which may be primarily due to the differences in the retrieved skin SST versus bulk in-situ SST. The 1DVAR scheme gives similar accuracy of SST for both INSAT-3D and 3DR with a bias of −0.36 K and standard deviation (Std) of 0.63 K. However, the NLSST algorithm provides slightly less accurate SST with bias (Std) of −0.18 K (0.87 K) for INSAT-3DR and −0.27 K (0.95 K) for INSAT-3D. Both the NLSST and 1DVAR algorithms are capable of producing the accurate thermal gradients from the retrieved SST as compared to the gradients calculated from daily Multiscale Ultrahigh Resolution (MUR) level-4 analysis SST acquired from Group for High-Resolution Sea Surface Temperature (GHRSST). Based on these spatial gradients, thermal fronts can be generated that are very useful for predicting potential fishery zones (PFZ), which is available from GEO satellites, INSAT-3D/3DR, in near real-time at 15-minute intervals. Results from the proposed 1DVAR and NLSST algorithms suggest a marked improvement in the SST estimates with reduced diurnal/seasonal biases as compared to the operational NLSST algorithm.
28
Adeniran, Ibrahim Ademola, Rui Zhu, Jinxin Yang, Xiaolin Zhu e Man Sing Wong. "Cross-Comparison between Sun-Synchronized and Geostationary Satellite-Derived Land Surface Temperature: A Case Study in Hong Kong". Remote Sensing 14, n.º 18 (6 de setembro de 2022): 4444. http://dx.doi.org/10.3390/rs14184444.
Texto completo da fonteResumo:
Harmonization of satellite imagery provides a good opportunity for studying land surface temperature (LST) as well as the urban heat island effect. However, it is challenging to use the harmonized data for the study of LST due to the systematic bias between the LSTs from different satellites, which is highly influenced by sensor differences and the compatibility of LST retrieval algorithms. To fill this research gap, this study proposes the comparison of different LST images retrieved from various satellites that focus on Hong Kong, China, by applying diverse retrieval algorithms. LST images generated from Landsat-8 using the mono-window algorithm (MWAL8) and split-window algorithm (SWAL8) would be compared with the LST estimations from Sentinel-3 SLSTR and Himawari-8 using the split-window algorithm (SWAS3 and SWAH8). Intercomparison will also be performed through segregated groups of different land use classes both during the daytime and nighttime. Results indicate that there is a significant difference among the quantitative distribution of the LST data generated from these three satellites, with average bias of up to −1.80 K when SWAH8 was compared with MWAL8, despite having similar spatial patterns of the LST images. The findings also suggest that retrieval algorithms and the dominant land use class in the study area would affect the accuracy of image-fusion techniques. The results from the day and nighttime comparisons revealed that there is a significant difference between day and nighttime LSTs, with nighttime LSTs from different satellite sensors more consistent than the daytime LSTs. This emphasizes the need to incorporate as much night-time LST data as available when predicting or optimizing fine-scale LSTs in the nighttime, so as to minimize the bias. The framework designed by this study will serve as a guideline towards efficient spatial optimization and harmonized use of LSTs when utilizing different satellite images associated with an array of land covers and at different times of the day.
29
Mao, K., Z. Qin, J. Shi e P. Gong. "A practical split‐window algorithm for retrieving land‐surface temperature from MODIS data". International Journal of Remote Sensing 26, n.º 15 (10 de agosto de 2005): 3181–204. http://dx.doi.org/10.1080/01431160500044713.
Texto completo da fonte
30
Raissouni, N., S. El Adib, J. A. Sobrino, N. Ben Achhab, A. Chahboun, A. Azyat e M. Lahraoua. "Towards LST split-window algorithm FPGA implementation for CubeSats on-board computations purposes". International Journal of Remote Sensing 40, n.º 5-6 (9 de janeiro de 2019): 2435–50. http://dx.doi.org/10.1080/01431161.2018.1562589.
Texto completo da fonte
31
Pang, Xiaoping, Pei Fan, Xi Zhao e Qing Ji. "Comparison of Leads Mapping in the Arctic Ocean Between Landsat and MODIS Ice Surface Temperature Products". Abstracts of the ICA 1 (15 de julho de 2019): 1. http://dx.doi.org/10.5194/ica-abs-1-289-2019.
Texto completo da fonteResumo:
<p><strong>Abstract.</strong> Leads are linear or wedge-shaped openings in the sea ice cover. They account for about half of the sensible heat transfer from the Arctic Ocean to the atmosphere in winter, though the sea surface area covered by them is only 1%~2% of the total sea ice area, thus monitoring leads changes and mapping leads distributions become an essential role on Arctic researches. Sea ice surface temperature (IST) product from Moderate Resolution Imaging Spectroradiometer (MODIS) is the most used source of leads monitoring and mapping, however, due to the coarse spatial resolution (1km at swath level), it suffers from mixed pixel effect when describes the temperature variations on thin leads (10m~100m), thus an IST product with a finer spatial resolution is needed. Though several surface temperature retrieval algorithms had been introduced based on Landsat 8 thermal imagery, none of them were validated in Arctic sea ice region. Given that the special weather conditions such as air temperature inversion were not taken into consideration, these algorithms may not always suitable for IST acquisition in Arctic. In this paper, we applied five mainstream IST algorithms (three split window algorithms and two single channel methods) on Arctic sea ice, compared the Landsat 8 IST with corresponding MODIS IST product, and validated all the satellite ISTs by in situ temperature measurements from drifting buoys. Compared to the buoy ISTs, the single channel method through web-based atmosphere correction tool provided by Barsi et al. (2003) offers the best accuracy. The split window algorithm proposed by Du et al. (2015) ranks the second, but constrained by the banding effect due to the stripe noise. Split window algorithm introduced by Jiménez-Muñoz et al. (2014) coincides with MODIS IST product best. All of the three methods mentioned above have slightly better accuracy than MODIS IST, particular in thin leads areas, which indicated that Landsat based leads map will provide us a better insight of Arctic sea ice. All the satellite ISTs tend to underestimate the surface temperature than those measured by buoys.</p>
32
Mia, Md, Yasuhiro Fujimitsu e Jun Nishijima. "Monitoring of Thermal Activity at the Hatchobaru–Otake Geothermal Area in Japan Using Multi-Source Satellite Images—With Comparisons of Methods, and Solar and Seasonal Effects". Remote Sensing 10, n.º 9 (7 de setembro de 2018): 1430. http://dx.doi.org/10.3390/rs10091430.
Texto completo da fonteResumo:
The Hatchobaru–Otake (HO) geothermal field is proximal to the Kuju volcano on Kyushu, Japan. There are currently three geothermal power plants operating within this geothermal field. Herein, we explore the thermal status of the HO geothermal area using ASTER thermal infrared data to monitor heat losses from 2009 to 2017. We assessed the solar effects and seasonal variation on heat losses based on day- and night-time Landsat thermal infrared images, and compared three conventional methods of land surface temperature (LST) measurements. The normalized difference vegetation index threshold method of emissivity, the split window algorithm for LST, and the Stefan–Boltzmann equation for radiative heat flux (RHF) were used to determine the heat loss within the study area. The radiative heat loss (RHL) was 0.36 MW, 38.61 MW, and 29.14 MW in 2009, 2013, and 2017, respectively, from the HO geothermal field. The highest anomaly in RHF was recorded in 2013, while the lowest was in 2009. The RHLs were higher from Otake than from the Hatchobaru thermal area in the year of 2013 (~31%) and 2017 (~78%). The seasonal variation in the RHLs based on all three LST estimation methods had a similar pattern, with the highest RHL (about 383–451 MW) in spring and the lowest (about 10–222 MW) in autumn for the daytime images from the HO geothermal field. In the nighttime images, the highest RHL was about 35–67 MW in autumn and the lowest was about 1–3 MW in spring, based on the three LST methods for RHFs. The highest RHL was about 35–42 MW in spring (day) and 3–7 MW in autumn (night) from the Hatchobaru thermal area, analyzed separately. Similarly, the highest RHL was about 22–25 MW in spring (day) and 4–5 MW in winter (night) from the Otake thermal area. The seasonal variation was greatly influenced by the regional ambient temperature. We also observed that clouds had a huge effect, with the highest values for both LST and RHF recorded below clouds on an autumn day. Overall, we obtained higher LSTs at nighttime and lower LSTs during the day from the improved mono-window algorithm than the split window algorithms for all of the seasons. The heat losses were also higher for the improved mono-window algorithm than the split window algorithms, based on the LST nighttime thermal infrared data. Considering the error level of the LST methods and Landsat 8 band 11, this study recommends the IWM method for LST using the Landsat 8 band 10 data. This study also suggests that both the nighttime ASTER and Landsat 8 thermal infrared data could be effective for monitoring the thermal status of the HO geothermal area, given that data is available for the entire period.
33
Wang, Han, Kebiao Mao, Fengyun Mu, Jiancheng Shi, Jun Yang, Zhaoliang Li e Zhihao Qin. "A Split Window Algorithm for Retrieving Land Surface Temperature from FY-3D MERSI-2 Data". Remote Sensing 11, n.º 18 (5 de setembro de 2019): 2083. http://dx.doi.org/10.3390/rs11182083.
Texto completo da fonteResumo:
The thermal infrared (TIR) data from the Medium Resolution Spectral Imager II (MERSI-2) on the Chinese meteorological satellite FY-3D have high spatiotemporal resolution. Although the MERSI-2 land surface temperature (LST) products have good application prospects, there are some deviations in the TIR band radiance from MERSI-2. To accurately retrieve LSTs from MERSI-2, a method based on a cross-calibration model and split window (SW) algorithm is proposed. The method is divided into two parts: cross-calibration and LST retrieval. First, the MODTRAN program is used to simulate the radiation transfer process to obtain MERSI-2 and Moderate Resolution Imaging Spectroradiometer (MODIS) simulation data, establish a cross-calibration model, and then calculate the actual brightness temperature (BT) of the MERSI-2 image. Second, according to the characteristics of the near-infrared (NIR) bands, the atmospheric water vapor content (WVC) is retrieved, and the atmospheric transmittance is calculated. The land surface emissivity is estimated by the NDVI-based threshold method, which ensures that both parameters (transmittance and emissivity) can be acquired simultaneously. The validation shows the following: 1) The average accuracy of our algorithm is 0.42 K when using simulation data; 2) the relative error of our algorithm is 1.37 K when compared with the MODIS LST product (MYD11A1); 3) when compared with ground-measured data, the accuracy of our algorithm is 1.23 K. Sensitivity analysis shows that the SW algorithm is not sensitive to the two main parameters (WVC and emissivity), which also proves that the estimation of LST from MERSI-2 data is feasible. In general, our algorithm exhibits good accuracy and applicability, but it still requires further improvement.
34
Wan, Jikang, Min Zhu e Wei Ding. "Accuracy Evaluation and Parameter Analysis of Land Surface Temperature Inversion Algorithm for Landsat-8 Data". Advances in Meteorology 2021 (24 de setembro de 2021): 1–16. http://dx.doi.org/10.1155/2021/9917145.
Texto completo da fonteResumo:
Many researchers have developed a variety of land surface temperature (LST) inversion algorithms based on satellite data. The main LST inversion algorithms include Radiative Transfer Equation (RTE), Single Channel (SC) algorithm, Mono Window (MW) algorithm, and Split Window (SW) algorithm. In this study, nine LST inversion algorithms were designed using Landsat-8 data and meteorological station data to test the inversion efficiency of different algorithms in different seasons and different locations. The results show that the error of various LST inversion algorithms will increase with the rise of LST. R2 of the inversion results of each LST algorithm and the measured data are all greater than 0.73°C in winter and about 0.5°C in the other seasons. By analyzing the stability of various algorithms inside and outside the city, it is found that the stability of each LST inversion algorithm inside the city is better than that outside the city. For the same surface features, the inversion temperature inside the city is 3–5°C higher than that outside the city. In addition, the sensitivity of various inversion algorithms to parameters was also analyzed. The influence of atmospheric transmittance on RTE, SC, and MW inversion algorithms is in logarithmic form. The effect of emissivity on each algorithm is linear. The influence of NDVI on the algorithms is mainly through the estimation of surface emissivity parameters to affect the inversion results. The effect of ascending radiation on SC (LST4 and LST5) is linear and on RTE (LST1 and LST2) is logarithmic. The effect of downslope radiation on SC and RTE is linear. The influence of atmospheric water vapor content on SW (LST7) is nonlinear.
35
DAVE, JALPESH A., MEHUL R. PANDYA, DHIRAJ B. SHAH, HASMUKH K. VARCHAND, PARTHKUMAR N. PARMAR, HIMANSHU J. TRIVEDI, VISHAL N. PATHAK, MANOJ SINGH e DISHA B. KARDANI. "Comparative analysis of two parameter-dependent split window algorithms for the land surface temperature retrieval using MODIS TIR observations". Journal of Agrometeorology 25, n.º 4 (30 de novembro de 2023): 510–16. http://dx.doi.org/10.54386/jam.v25i4.2286.
Texto completo da fonteResumo:
MODIS Land Surface Temperature (LST) product is extensively used in agricultural studies like crop health assessment, soil moisture estimation, irrigation management, land use land cover change, air-temperature retrieval and crop water stress detection. Numerous studies have used Split Window (SW) algorithms to retrieve LST from MODIS TIR bands. Among them, some utilize Sensor View Angle Dependent (SVAD) or Columnar Water Vapor Dependent (CWVD) SW algorithms. Present study aims to make use of SVAD and CWVD SW algorithms and compare them to evaluate the LST retrieval accuracy over various land surface type. Theoretical accuracy assessment of the CWVD and SVAD algorithms demonstrates a good accuracy with the RMSE of 1.09K and 1.42K, respectively. The experimental retrieval of LST achieves exceptionally good accuracy, with a RMSE of 1.45K in the CWVD algorithm and 1.80K in the SVAD algorithm, particularly in heterogeneous regions. In homogeneous regions, the RMSE values are 1.14K in CWVD and 1.10K in SVAD. Both algorithms exhibit satisfactory accuracy; nevertheless, the application of these algorithms may vary in agricultural contexts. Based on the obtained results and the inclusion of required parameters, we have arrived at a conclusion regarding the superior performance of the SVAD compared to the CWVD for LST retrieval.
36
Chin, Wee Jian, Ban-Hoe Kwan, Wei Yin Lim, Yee Kai Tee, Shalini Darmaraju, Haipeng Liu e Choon-Hian Goh. "A Novel Respiratory Rate Estimation Algorithm from Photoplethysmogram Using Deep Learning Model". Diagnostics 14, n.º 3 (28 de janeiro de 2024): 284. http://dx.doi.org/10.3390/diagnostics14030284.
Texto completo da fonteResumo:
Respiratory rate (RR) is a critical vital sign that can provide valuable insights into various medical conditions, including pneumonia. Unfortunately, manual RR counting is often unreliable and discontinuous. Current RR estimation algorithms either lack the necessary accuracy or demand extensive window sizes. In response to these challenges, this study introduces a novel method for continuously estimating RR from photoplethysmogram (PPG) with a reduced window size and lower processing requirements. To evaluate and compare classical and deep learning algorithms, this study leverages the BIDMC and CapnoBase datasets, employing the Respiratory Rate Estimation (RRest) toolbox. The optimal classical techniques combination on the BIDMC datasets achieves a mean absolute error (MAE) of 1.9 breaths/min. Additionally, the developed neural network model utilises convolutional and long short-term memory layers to estimate RR effectively. The best-performing model, with a 50% train–test split and a window size of 7 s, achieves an MAE of 2 breaths/min. Furthermore, compared to other deep learning algorithms with window sizes of 16, 32, and 64 s, this study’s model demonstrates superior performance with a smaller window size. The study suggests that further research into more precise signal processing techniques may enhance RR estimation from PPG signals.
37
Sajib, Md Qutub Uddin, e Tao Wang. "Estimation of Land Surface Temperature in an Agricultural Region of Bangladesh from Landsat 8: Intercomparison of Four Algorithms". Sensors 20, n.º 6 (23 de março de 2020): 1778. http://dx.doi.org/10.3390/s20061778.
Texto completo da fonteResumo:
The presence of two thermal bands in Landsat 8 brings the opportunity to use either one or both of these bands to retrieve Land Surface Temperature (LST). In order to compare the performances of existing algorithms, we used four methods to retrieve LST from Landsat 8 and made an intercomparison among them. Apart from the direct use of the Radiative Transfer Equation (RTE), Single-Channel Algorithm and two Split-Window Algorithms were used taking an agricultural region in Bangladesh as the study area. The LSTs retrieved in the four methods were validated in two ways: first, an indirect validation against reference LST, which was obtained in the Atmospheric and Topographic CORection (ATCOR) software module; second, cross-validation with Terra MODerate Resolution Imaging Spectroradiometer (MODIS) daily LSTs that were obtained from the Application for Extracting and Exploring Analysis Ready Samples (A ρ ρ EEARS) online tool. Due to the absence of LST-monitoring radiosounding instruments surrounding the study area, in situ LSTs were not available; hence, validation of satellite retrieved LSTs against in situ LSTs was not performed. The atmospheric parameters necessary for the RTE-based method, as well as for other methods, were calculated from the National Centers for Environmental Prediction (NCEP) database using an online atmospheric correction calculator with MODerate resolution atmospheric TRANsmission (MODTRAN) codes. Root-mean-squared-error (RMSE) against reference LST, as well as mean bias error against both reference and MODIS daily LSTs, was used to interpret the relative accuracy of LST results. All four methods were found to result in acceptable LST products, leaving atmospheric water vapor content (w) as the important determinant for the precision result. Considering a set of several Landsat 8 images of different dates, Jiménez-Muñoz et al.’s (2014) Split-Window algorithm was found to result in the lowest mean RMSE of 1.19 ° C . Du et al.’s (2015) Split-Window algorithm resulted in mean RMSE of 1.50 ° C . The RTE-based direct method and the Single-Channel algorithm provided the mean RMSE of 2.47 ° C and 4.11 ° C , respectively. For Du et al.’s algorithm, the w range of 0.0 to 6.3 g cm−2 was considered, whereas for the other three methods, w values as retrieved from the NCEP database were considered for corresponding images. Land surface emissivity was retrieved through the Normalized Difference Vegetation Index (NDVI)-threshold method. This intercomparison study provides an LST retrieval methodology for Landsat 8 that involves four algorithms. It proves that (i) better LST results can be obtained using both thermal bands of Landsat 8; (ii) the NCEP database can be used to determine atmospheric parameters using the online calculator; (iii) MODIS daily LSTs from A ρ ρ EEARS can be used efficiently in cross-validation and intercomparison of Landsat 8 LST algorithms; and (iv) when in situ LST data are not available, the ATCOR-derived LSTs can be used for indirect verification and intercomparison of Landsat 8 LST algorithms.
38
Bayat, F., e M. Hasanlou. "FEASIBILITY STUDY OF LANDSAT-8 IMAGERY FOR RETRIEVING SEA SURFACE TEMPERATURE (CASE STUDY PERSIAN GULF)". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B8 (24 de junho de 2016): 1107–10. http://dx.doi.org/10.5194/isprs-archives-xli-b8-1107-2016.
Texto completo da fonteResumo:
Sea surface temperature (SST) is one of the critical parameters in marine meteorology and oceanography. The SST datasets are incorporated as conditions for ocean and atmosphere models. The SST needs to be investigated for various scientific phenomenon such as salinity, potential fishing zone, sea level rise, upwelling, eddies, cyclone predictions. On the other hands, high spatial resolution SST maps can illustrate eddies and sea surface currents. Also, near real time producing of SST map is suitable for weather forecasting and fishery applications. Therefore satellite remote sensing with wide coverage of data acquisition capability can use as real time tools for producing SST dataset. Satellite sensor such as AVHRR, MODIS and SeaWIFS are capable of extracting brightness values at different thermal spectral bands. These brightness temperatures are the sole input for the SST retrieval algorithms. Recently, Landsat-8 successfully launched and accessible with two instruments on-board: (1) the Operational Land Imager (OLI) with nine spectral bands in the visual, near infrared, and the shortwave infrared spectral regions; and (2) the Thermal Infrared Sensor (TIRS) with two spectral bands in the long wavelength infrared. The two TIRS bands were selected to enable the atmospheric correction of the thermal data using a split window algorithm (SWA). The TIRS instrument is one of the major payloads aboard this satellite which can observe the sea surface by using the split-window thermal infrared channels (CH10: 10.6 μm to 11.2 μm; CH11: 11.5 μm to 12.5 μm) at a resolution of 30 m. The TIRS sensors have three main advantages comparing with other previous sensors. First, the TIRS has two thermal bands in the atmospheric window that provide a new SST retrieval opportunity using the widely used split-window (SW) algorithm rather than the single channel method. Second, the spectral filters of TIRS two bands present narrower bandwidth than that of the thermal band on board on previous Landsat sensors. Third, TIRS is one of the best space born and high spatial resolution with 30 m. in this regards, Landsat-8 can use the Split-Window (SW) algorithm for retrieving SST dataset. Although several SWs have been developed to use with other sensors, some adaptations are required in order to implement them for the TIRS spectral bands. Therefore, the objective of this paper is to develop a SW, adapted for use with Landsat-8 TIRS data, along with its accuracy assessment. In this research, that has been done for modelling SST using thermal Landsat 8-imagery of the Persian Gulf. Therefore, by incorporating contemporary in situ data and SST map estimated from other sensors like MODIS, we examine our proposed method with coefficient of determination (R2) and root mean square error (RMSE) on check point to model SST retrieval for Landsat-8 imagery. Extracted results for implementing different SW's clearly shows superiority of utilized method by R<sup>2</sup> = 0.95 and RMSE = 0.24.
39
Bayat, F., e M. Hasanlou. "FEASIBILITY STUDY OF LANDSAT-8 IMAGERY FOR RETRIEVING SEA SURFACE TEMPERATURE (CASE STUDY PERSIAN GULF)". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B8 (24 de junho de 2016): 1107–10. http://dx.doi.org/10.5194/isprsarchives-xli-b8-1107-2016.
Texto completo da fonteResumo:
Sea surface temperature (SST) is one of the critical parameters in marine meteorology and oceanography. The SST datasets are incorporated as conditions for ocean and atmosphere models. The SST needs to be investigated for various scientific phenomenon such as salinity, potential fishing zone, sea level rise, upwelling, eddies, cyclone predictions. On the other hands, high spatial resolution SST maps can illustrate eddies and sea surface currents. Also, near real time producing of SST map is suitable for weather forecasting and fishery applications. Therefore satellite remote sensing with wide coverage of data acquisition capability can use as real time tools for producing SST dataset. Satellite sensor such as AVHRR, MODIS and SeaWIFS are capable of extracting brightness values at different thermal spectral bands. These brightness temperatures are the sole input for the SST retrieval algorithms. Recently, Landsat-8 successfully launched and accessible with two instruments on-board: (1) the Operational Land Imager (OLI) with nine spectral bands in the visual, near infrared, and the shortwave infrared spectral regions; and (2) the Thermal Infrared Sensor (TIRS) with two spectral bands in the long wavelength infrared. The two TIRS bands were selected to enable the atmospheric correction of the thermal data using a split window algorithm (SWA). The TIRS instrument is one of the major payloads aboard this satellite which can observe the sea surface by using the split-window thermal infrared channels (CH10: 10.6 μm to 11.2 μm; CH11: 11.5 μm to 12.5 μm) at a resolution of 30 m. The TIRS sensors have three main advantages comparing with other previous sensors. First, the TIRS has two thermal bands in the atmospheric window that provide a new SST retrieval opportunity using the widely used split-window (SW) algorithm rather than the single channel method. Second, the spectral filters of TIRS two bands present narrower bandwidth than that of the thermal band on board on previous Landsat sensors. Third, TIRS is one of the best space born and high spatial resolution with 30 m. in this regards, Landsat-8 can use the Split-Window (SW) algorithm for retrieving SST dataset. Although several SWs have been developed to use with other sensors, some adaptations are required in order to implement them for the TIRS spectral bands. Therefore, the objective of this paper is to develop a SW, adapted for use with Landsat-8 TIRS data, along with its accuracy assessment. In this research, that has been done for modelling SST using thermal Landsat 8-imagery of the Persian Gulf. Therefore, by incorporating contemporary in situ data and SST map estimated from other sensors like MODIS, we examine our proposed method with coefficient of determination (R2) and root mean square error (RMSE) on check point to model SST retrieval for Landsat-8 imagery. Extracted results for implementing different SW's clearly shows superiority of utilized method by R<sup>2</sup> = 0.95 and RMSE = 0.24.
40
Du, Chen, Huazhong Ren, Qiming Qin, Jinjie Meng e Shaohua Zhao. "A Practical Split-Window Algorithm for Estimating Land Surface Temperature from Landsat 8 Data". Remote Sensing 7, n.º 1 (8 de janeiro de 2015): 647–65. http://dx.doi.org/10.3390/rs70100647.
Texto completo da fonte
41
Ren, Huazhong, Guangjian Yan, Ling Chen e Zhaoliang Li. "Angular effect of MODIS emissivity products and its application to the split-window algorithm". ISPRS Journal of Photogrammetry and Remote Sensing 66, n.º 4 (julho de 2011): 498–507. http://dx.doi.org/10.1016/j.isprsjprs.2011.02.008.
Texto completo da fonte
42
Yang, Hu, e Zhongdong Yang. "A modified land surface temperature split window retrieval algorithm and its applications over China". Global and Planetary Change 52, n.º 1-4 (julho de 2006): 207–15. http://dx.doi.org/10.1016/j.gloplacha.2006.02.015.
Texto completo da fonte
43
Li, Shanshan, e Geng-Ming Jiang. "Land Surface Temperature Retrieval From Landsat-8 Data With the Generalized Split-Window Algorithm". IEEE Access 6 (2018): 18149–62. http://dx.doi.org/10.1109/access.2018.2818741.
Texto completo da fonte
44
Rozenstein, Offer, Zhihao Qin, Yevgeny Derimian e Arnon Karnieli. "Derivation of Land Surface Temperature for Landsat-8 TIRS Using a Split Window Algorithm". Sensors 14, n.º 4 (25 de março de 2014): 5768–80. http://dx.doi.org/10.3390/s140405768.
Texto completo da fonte
45
Ye, Xin, Huazhong Ren, Rongyuan Liu, Qiming Qin, Yao Liu e Jijia Dong. "Land Surface Temperature Estimate From Chinese Gaofen-5 Satellite Data Using Split-Window Algorithm". IEEE Transactions on Geoscience and Remote Sensing 55, n.º 10 (outubro de 2017): 5877–88. http://dx.doi.org/10.1109/tgrs.2017.2716401.
Texto completo da fonte
46
Hu, YANG, e YANG Zhong-dong. "A Modified Land Surface Temperature Split Window Retrieval Algorithm and Its Applications Over China". National Remote Sensing Bulletin, n.º 4 (2006): 600–607. http://dx.doi.org/10.11834/jrs.20060488.
Texto completo da fonte
47
LIU, Chao, Hua LI, Yongming DU, Biao CAO, Qinhuo LIU, Xiangchen MENG e Youjian HU. "Practical split-window algorithm for retrieving land surface temperature from Himawari 8 AHI data". National Remote Sensing Bulletin 21, n.º 5 (2017): 702–14. http://dx.doi.org/10.11834/jrs.20176492.
Texto completo da fonte
48
Zheng, Yitong, Huazhong Ren, Jinxin Guo, Darren Ghent, Kevin Tansey, Xingbang Hu, Jing Nie e Shanshan Chen. "Land Surface Temperature Retrieval from Sentinel-3A Sea and Land Surface Temperature Radiometer, Using a Split-Window Algorithm". Remote Sensing 11, n.º 6 (17 de março de 2019): 650. http://dx.doi.org/10.3390/rs11060650.
Texto completo da fonteResumo:
Land surface temperature (LST) is a crucial parameter in the interaction between the ground and the atmosphere. The Sentinel-3A Sea and Land Surface Temperature Radiometer (SLSTR) provides global daily coverage of day and night observation in the wavelength range of 0.55 to 12.0 μm. LST retrieved from SLSTR is expected to be widely used in different fields of earth surface monitoring. This study aimed to develop a split-window (SW) algorithm to estimate LST from two-channel thermal infrared (TIR) and one-channel middle infrared (MIR) images of SLSTR observation. On the basis of the conventional SW algorithm, using two TIR channels for the daytime observation, the MIR data, with a higher atmospheric transmittance and a lower sensitivity to land surface emissivity, were further used to develop a modified SW algorithm for the nighttime observation. To improve the retrieval accuracy, the algorithm coefficients were obtained in different subranges, according to the view zenith angle, column water vapor, and brightness temperature. The proposed algorithm can theoretically estimate LST with an error lower than 1 K on average. The algorithm was applied to northern China and southern UK, and the retrieved LST captured the surface features for both daytime and nighttime. Finally, ground validation was conducted over seven sites (four in the USA and three in China). Results showed that LST could be estimated with an error mostly within 1.5 to 2.5 K from the algorithm, and the error of the nighttime algorithm involved with MIR data was about 0.5 K lower than the daytime algorithm.
49
Jain, Sakshi, e Shashi Kumar. "Spaceborne Thermal Remote Sensing for Characterization of the Land Surface Temperature of Manmade and Natural Features". Proceedings 67, n.º 1 (9 de novembro de 2020): 2. http://dx.doi.org/10.3390/asec2020-07568.
Texto completo da fonteResumo:
The changes in land surface temperature (LST) concerning time and space are mapped with the help of satellite remote sensing techniques. These measurements are used for determining several geophysical parameters including soil moisture, evapotranspiration, thermal inertia, and vegetation water stress. This study aims at calculating and analyzing the LST of manmade and natural features of Doon Valley, Uttarakhand, India. The study area includes the forest range of Doon Valley, agricultural areas, and urban settlements. Spaceborne multitemporal thermal bands of Landsat 8 were used to calculate the LST of various features of the study area. Split-window algorithm and emissivity-based algorithms were tested on the Landsat-8 data for LST calculation. The study also explored the effect of atmospheric correction on the temperature calculation. The land surface temperature determined using an emissivity based method that did not provide atmospheric correction was found to be less accurate as compared to the results by the split-window method. The LST for urban settlements is higher than the forest cover. A temporal analysis of the data shows an increase in the temperature for October 2018. The study shows the potential of the spaceborne thermal sensors for the multitemporal analysis of the LST measurement of manmade and natural features.
50
Heydari, Masoud, e Mehdi Akhoondzadeh Hanzaei. "Development a split window algorithm to estimate land surface temperature from Sentinel -3 satellite data". Journal of Geospatial Information Technology 8, n.º 2 (1 de setembro de 2020): 93–113. http://dx.doi.org/10.29252/jgit.8.2.93.
Texto completo da fonte