Literatura científica selecionada sobre o tema "Simulation macroscopique"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Simulation macroscopique".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Simulation macroscopique"
Assouline, S. "Simulation numérique de l'usinage à l'échelle macroscopique : modèles dynamiques de la pièceNumerical simulation of machining at the macroscopic scale: dynamic models of the workpiece". Mécanique & Industries 3, n.º 4 (2002): 389–402. http://dx.doi.org/10.1016/s1296-2139(02)01178-8.
Texto completo da fonteDorval, Vincent, Nicolas Leymarie, Alexandre Imperiale, Edouard Demaldent, Zakaria Aghenzour e Pierre-Emile Lhuillier. "Simulations numériques à l'échelle de microstructures hétérogènes pour déterminer des propriétés effectives de propagation ultrasonore". e-journal of nondestructive testing 28, n.º 9 (setembro de 2023). http://dx.doi.org/10.58286/28514.
Texto completo da fontePhilip, Maxime, Matthieu Boileau, Ronan Vicquelin, Thomas Schmitt, Daniel Durox, Jean-François Bourgouin e Sébastien Candel. "Simulation of the Ignition Process in an Annular Multiple-Injector Combustor and Comparison With Experiments". Journal of Engineering for Gas Turbines and Power 137, n.º 3 (30 de setembro de 2014). http://dx.doi.org/10.1115/1.4028265.
Texto completo da fonteGumus, Melisa, e Alessandro Leonardo Ricci. "Modelling neurodevelopment, neurodegeneration, and amyloid beta aggregation in the context of Alzheimer's using COBWEB". Journal of Student Science and Technology 10, n.º 2 (15 de novembro de 2017). http://dx.doi.org/10.13034/jsst.v10i2.208.
Texto completo da fonteTeses / dissertações sobre o assunto "Simulation macroscopique"
BOUSQUET, MELOU PATRICK. "Modelisation macroscopique et simulation numerique de la solidification des melanges binaires". Paris 6, 2000. http://www.theses.fr/2000PA066067.
Texto completo da fonteLe, lan Jean-Vincent. "Etude de méthodes simplifiées pour la simulation de l'usinage à l'échelle macroscopique". Paris, ENSAM, 2007. https://pastel.archives-ouvertes.fr/pastel-00003289.
Texto completo da fonteThis work presents some simplified methods for machining simulation. Two main phenomena are studied, the form error and chatter prediction. For both studies the workpiece and the tool are modelized using a finite element model. The material cutting is modelized using an experimental cutting force law. The resulting cutting force is applied on models as a punctual loading. In order to predict the form error, the relative displacement between the tool and the workpiece is computed for each loading configuration. Then the final form error is built using these results. Regenerative effects are not taken into account. The study of the cutting instability is done appart. Chatter-relative methods are using a frequency domain approach to compute the inconditionnally stable depth of cut. For both aspects, a method based on the static behaviour of the system is presented first. Then, dynamic-based methods are presented. Computed results are confronted to experiments
Leclere, Guillaume. "Simulation numérique de la rupture dynamique de structures métalliques à l'échelle macroscopique". Nantes, 2004. http://www.theses.fr/2004NANT2118.
Texto completo da fonteAzoug, Aurélie. "Micromécanismes et comportement macroscopique d'un élastomère fortement chargé". Phd thesis, Ecole Polytechnique X, 2010. http://tel.archives-ouvertes.fr/tel-00552234.
Texto completo da fonteCohen, Assouline Stéphanie. "Simulation numérique de l'usinage à l'échelle macroscopique : prise en compte d'une pièce déformable". Phd thesis, Paris, ENSAM, 2005. http://tel.archives-ouvertes.fr/tel-00012006.
Texto completo da fonteLe principal apport de ce travail est la prise en compte de pièces dont la zone concernée par l'usinage est flexible. Cette présence de déformations dans la pièce a nécessité une définition précise de l'enlèvement de matière. Cette définition se fonde sur une configuration dite matérielle, où la réalisation pratique de la simulation de l'usinage est effectuée.
Par ailleurs, les pièces flexibles étant généralement très minces, l'enlèvement de matière peut modifier de façon significative le comportement dynamique de la pièce (perte de masse et de raideur). Pour être fidèle, une simulation doit alors prendre en compte cette modification de façon régulière en cours d'usinage. Nous montrons que cette prise en compte ne peut dans certains cas être évitée, et nous proposons une stratégie limitant les coûts numériques induits par cette prise en compte.
Un autre apport du travail réalisé est l'utilisation d'un modèle géométrique différent de celui des approches précédentes du LMSP, pour représenter le volume occupé par la pièce. Avec le modèle géométrique de la pièce retenu dans les travaux précédents du LMSP (modèle B-Rep analogue aux modèles utilisés en CAO), de très nombreuses intersections de polyèdres conduisent à des facettes "dégénérées" dont la prise en compte dans les algorithmes d'intersection est loin d'être triviale et constitue actuellement un des points bloquants pour ce qui concerne la robustesse. La nouvelle technique adoptée est celle des Z-buffer où la pièce est modélisée par des dexels (ensemble de « bâtonnets » disposés sur une matrice régulière). Cette description permet de simplifier sensiblement les algorithmes d'intersection tout en les rendant plus robustes. Cette nouvelle description nous a conduit à revoir la démarche de modélisation de l'interaction outil/pièce et notamment la démarche de calcul des efforts de coupe. Cette modélisation s'intègre dans le logiciel Nessy du LMSP. Par les résultats obtenus, nous démontrons la faisabilité de notre approche et son potentiel d'analyse.
Beauchesne, Erwan. "Simulation numérique de l'usinage à l'échelle macroscopique : prise en compte d'une pièce déformable". Paris, ENSAM, 1999. http://www.theses.fr/1999ENAM0033.
Texto completo da fonteMayet, Clément. "Simulation énergétique flexible d’un carrousel de métros basée sur la représentation énergétique macroscopique". Thesis, Lille 1, 2016. http://www.theses.fr/2016LIL10013/document.
Texto completo da fonteTransportation systems have to be efficient in terms of energy in order to limit their environmental impact. Electric public transportation, such as subways or tramways, is thus strongly requested in urban areas. Various innovative solutions have emerged recently to increase their energy efficiency (energy storage systems, reversible traction power substations, etc.). However, due to the complexity of the development and optimization of such systems, numerical simulation tools are essential. Nevertheless, simulators of railway systems are particularly delicate to develop due to non-linearity (non-reversibility of traction power substations), non-stationary (displacement of trains), and multiple energetic interactions which exists within these kind of systems. This PhD thesis then proposes a new simulation tool of subway system based on EMR formalism (Energetic Macroscopic Representation). This formalism structures the models according to the energetic properties of the system. It leads to a forward simulation approach with exclusive use of the integral causality. In that way, the proposed simulation tool is stemming from an innovative approach and allows a new vision of subway systems. These approaches allow especially the increasing of the simulator flexibility and the obtaining of physical simulation results. Moreover, this PhD thesis has the particularity to experimentally validate all the developed models
Dubacq, Benoît. "Thermodynamique des phyllosilicates de basse température : de l'approche macroscopique à la simulation atomistique". Phd thesis, Grenoble 1, 2008. http://www.theses.fr/2008GRE10265.
Texto completo da fontePhyllosilicates are important minerals in metamorphic petrology as well as in waste storage sites where clays are extensively used. Despite this fact, there is no thermodynamic model allowing to describe and to predict properly the behaviour of clay minerals (for example variation of volume with dehydration) and their phase relations with other minerals in metamorphic conditions. Inversely, the thermodynamic models of phengites are well constrained at high pressure and temperature but do not allow accurate thermobarometric estimations at temperatures less than about 350°C. In this study, we propose two new thermodynamic models for smectites, illites, mixed-layers illites / smectites and phengites. With these models, it is possible to predict the composition of stable clays at low temperature and to estimate the pressure and temperature of crystallisation of dioctahedral aluminous phyllosilicates. These models take into consideration the hydration state of clay minerals as a function of pressure, temperature and water activity. The thermodynamic properties of solid solutions and hydrated mica-like end-members have been estimated in order to reproduce experimental results of i) clay dehydration, ii) nature of stable phases, iii) calorimetric measurements, as well as known (or estimated with independent methods) pressure-temperature conditions of crystallization of phyllosilicates analyses, from diagenesis conditions to ultra - high - pressure / temperature conditions. Phase diagrams have been computed with these models in simple systems. Conditions of crystallization of phyllosilicates have been estimated on many samples, including electron microprobe compositional maps. We investigated several approaches to estimate thermodynamic properties of minerals. All these methods revealed to be insufficiently accurate to estimate standard enthalpy of formation; calculated enthalpies of formation can not be directly used for thermobarometric estimations. However, we suggest several improvements to these methods. We used atomistic simulation to calculate the mixing enthalpy along two solid solutions binaries of interest in low-temperature petrology. Results are in agreement with observations in natural systems and confirm the importance of hydration in clay minerals stability
Dubacq, Benoît. "Thermodynamique des phyllosilicates de basse température : de l'approche macroscopique à la simulation atomistique". Phd thesis, Université Joseph Fourier (Grenoble), 2008. http://tel.archives-ouvertes.fr/tel-00411810.
Texto completo da fonteNous proposons deux modèles thermodynamiques pour les smectites, illites, interstratifiés illites / smectites et micas. Ces modèles permettent respectivement de calculer la composition des phases stables à basse température, incluant les argiles, et l'estimation thermobarométrique de leurs conditions de cristallisation. Ils prennent tous deux en compte l'hydratation des phyllosilicates, variable en fonction de la composition, la pression, la température et l'activité d'eau. L'évaluation des propriétés thermodynamiques des équivalents hydratés des pôles purs des micas et des paramètres de solution solide nécessaires a été réalisée pour reproduire au mieux les contraintes expérimentales de déshydratation, nature des phases stables, calorimétrie ainsi que les estimations des conditions de cristallisation d'une compilation d'analyses, dont la gamme s'étend de la diagenèse à la haute pression - haute température. Ces modèles sont appliqués au calcul de diagramme de phase dans des systèmes chimiques simples et à l'estimation des conditions de cristallisation de phyllosilicates de nombreux échantillons naturels, y compris à partir de cartographies élémentaires.
Nous avons testé plusieurs méthodes d'estimation des propriétés thermodynamiques des phases pour lesquelles les contraintes expérimentales et / ou du milieu naturel sont insuffisantes. Aucune d'entre elles ne permet une estimation de l'enthalpie standard de formation directement utilisable à des fins thermobarométriques. Nous proposons cependant une approche pour améliorer cette situation. De plus, nous avons utilisé une méthode de simulation atomistique pour évaluer l'enthalpie de mélange le long de deux solutions solides d'intérêt pour la pétrologie de basse température. Les résultats sont compatibles avec les observations du milieu naturel, et le calcul du solvus entre les pôles muscovite et pyrophyllite confirme l'importance de l'hydratation pour la stabilité des argiles.
Kostenko, Romaric. "Simulation d'écoulements non-newtoniens en milieu poreux macroscopique par la méthode de lattice-Boltzmann". Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLS561.
Texto completo da fonteA non-newtonian fluid is a fluid which relation between it's shear rate and the stress under which it is put, is not linear. In a porous medium, the stress imposed to the fluid depends on the imposed pressure, but also on the pores size, and therefore on the macroscopic scale permeability. Some fluids have a rheology such that the fluid show a change of behaviour reaching a yield stress. If the pore size is random, then the fluid will present heterogeneous regime changes in the medium. The flow will then show a first regime where the whole fluid will be under the threshold, a regime where the whole fluid will be far above the threshold, and an intermediate regime for which both rheologies coexists. We are interested in intermediate regime for the flow of non-newtonian fluids in macroscopic porous media, and study it with numerical simulations. More particularly, we look at the flow of a Bingham fluid and that of a Carreau fluid. The Bingham fluid doesn't flow under a yield stress. Under the threshold, it behaves as a solid. Beyond, it's shear-rate/stress relation is an affine law. Carreau fluids have a shear-rate/stress relation that change regime between that of a newtonian fluid, and a power law. The macroscopic scale study is done simulating a Darcy-Brinkman law in a heterogeneous permeability field. We use for our simulations the lattice-Boltzmann method, on a regular node grid, and more specifically Irina Ginzburg two relaxation-time scheme. For each fluid, we study the flow-pressure relationship, as well as the geometric properties and the multi-scale properties in the fluid regions in the same flow regime (clusters), properties such as their size and shape. We also link these geometrical properties to the percolation theory, which studies the behaviour of randomly opening node maps and predicts fractal properties