Literatura científica selecionada sobre o tema "SHM-POD"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "SHM-POD".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "SHM-POD"
Falcetelli, Francesco, Nan Yue, Leonardo Rossi, Gabriele Bolognini, Filippo Bastianini, Dimitrios Zarouchas e Raffaella Di Di Sante. "A Model-Assisted Probability of Detection Framework for Optical Fiber Sensors". Sensors 23, n.º 10 (16 de maio de 2023): 4813. http://dx.doi.org/10.3390/s23104813.
Texto completo da fonteGüemes, Alfredo, Antonio Fernandez-Lopez, Angel Renato Pozo e Julián Sierra-Pérez. "Structural Health Monitoring for Advanced Composite Structures: A Review". Journal of Composites Science 4, n.º 1 (27 de janeiro de 2020): 13. http://dx.doi.org/10.3390/jcs4010013.
Texto completo da fonteSzewieczek, Artur, Christian Willberg, Daniel Schmidt e Michael Sinapius. "Virtual sensors for SHM using isogeometric piezoelectric finite elements". International Journal of Structural Integrity 6, n.º 6 (7 de dezembro de 2015): 704–13. http://dx.doi.org/10.1108/ijsi-11-2014-0064.
Texto completo da fonteGobat, Giorgio, Saeed Eftekhar Azam e Stefano Mariani. "SHM and Efficient Strategies for Reduced-Order Modeling". Engineering Proceedings 2, n.º 1 (2 de março de 2021): 98. http://dx.doi.org/10.3390/engproc2020002098.
Texto completo da fonteTrbović, Borislav. "PRIMENA SENZORA U OKVIRU SHM KONCEPTA KROZ REŠENJE KREIRANO POMOĆU LABVIEW PROGRAMSKOG OKRUŽENJA". Zbornik radova Fakulteta tehničkih nauka u Novom Sadu 37, n.º 09 (7 de setembro de 2022): 1435–38. http://dx.doi.org/10.24867/19be14trbovic.
Texto completo da fonteBayoumi, Ahmed, Tobias Minten e Inka Mueller. "Determination of Detection Probability and Localization Accuracy for a Guided Wave-Based Structural Health Monitoring System on a Composite Structure". Applied Mechanics 2, n.º 4 (2 de dezembro de 2021): 996–1008. http://dx.doi.org/10.3390/applmech2040058.
Texto completo da fonteGagar, Daniel, Peter Foote e Phil E. Irving. "Detection and Monitoring of Fatigue Cracks in Metallic Structures Using Acoustic Emission: Routes to Quantification of Probability of Detection". Advanced Materials Research 891-892 (março de 2014): 1268–74. http://dx.doi.org/10.4028/www.scientific.net/amr.891-892.1268.
Texto completo da fonteWilcox, Paul D., C. K. Lee, Jonathan J. Scholey, Michael I. Friswell, M. R. Wisnom e B. W. Drinkwater. "Progress Towards a Forward Model of the Complete Acoustic Emission Process". Advanced Materials Research 13-14 (fevereiro de 2006): 69–76. http://dx.doi.org/10.4028/www.scientific.net/amr.13-14.69.
Texto completo da fonteM.P. SAHU, ML KEWAT, A.K. JHA, V.K. CHOUDHARY, BADAL VERMA, JITENDRA PATIDAR, VIKASH SINGH e PRATIK SANODIYA. "Effect of crop residue and weed management on weed incidence, soil moisture and yield of chickpea". Indian Journal of Agronomy 68, n.º 4 (9 de fevereiro de 2024): 404–12. http://dx.doi.org/10.59797/ija.v68i4.5463.
Texto completo da fonteMarrazzo, Massimiliano, Zahra Sharif Khodaei e M. H. Ferri Aliabadi. "Laplace Domain Boundary Element Method for Structural Health Monitoring of Poly-Crystalline Materials at Micro-Scale". Applied Sciences 13, n.º 24 (10 de dezembro de 2023): 13138. http://dx.doi.org/10.3390/app132413138.
Texto completo da fonteTeses / dissertações sobre o assunto "SHM-POD"
Sharma, Sanjay. "Performance Demonstration of Guided Waves based Structural Health Monitoring system for Aerospace Application". Electronic Thesis or Diss., université Paris-Saclay, 2022. http://www.theses.fr/2022UPASG073.
Texto completo da fonteGuided elastic waves emitted and received by thin piezoelectric transducers are recognized as a promising technology for several applications of Structural Health Monitoring, especially of aerospace components. Demonstration of the performances of such systems, often expressed in terms of Probability Of Detection (POD) curve, is a key enabler of the successful deployment of the technology in industry. POD curve experimental determination requires many instrumented samples making its cost prohibitive. A simulation-based approach, or model-assisted, is an attractive alternative. However, simulation in guided waves-based SHM and POD determination of such systems are so far limited due to a lack of specific methodology, procedures, appropriate statistical methods, and validation. This thesis proposes a general methodology for a model-assisted POD approach of guided waves based SHM, with a demonstration on monitoring of a growing crack from a hole in an aluminum plate. The methodology benefits from the efficient time domain transient spectral finite element simulation tool developed at CEA-List (CIVA SHM module) that allows to run the large simulation campaigns required to determine a POD curve. A new hybrid actuator model has been proposed in this work by considering the transducer frequency dependent behaviour and normal stress in addition to radial stress as a surface loads to enable the use of simulation on a higher range of excitation frequencies, suitable for the targeted application. Two recent suitable statistical methods: length-at-detection and random effects, have then been adapted to estimate and to compare the POD curve from both experimental and simulated datasets. The Bayesian approach is found to be more useful in model parameter estimation of random effects method for comparing the uncertainty bound for each model parameter from experimental and simulated datasets than Maximum Likelihood Estimation. Finally, a sample size determination study has been conducted based on the random effects method to identify how many samples are required to achieve the requirement of a particular SHM application. All these results show great confidence in the model-assisted approach to POD estimation methodology and confirm the potential of this solution as a cost-effective tool for performance demonstration of guided waves-based SHM systems
Trabalhos de conferências sobre o assunto "SHM-POD"
Duke Jr., John C., Marshal H. McCord III e Ryan J. Lane. "SHM POD and POT". In ASNT 27th Annual Research Symposium. ASNT, 2018. http://dx.doi.org/10.32548/rs.2018.025.
Texto completo da fonteSwindell, Paul, e Danielle Stephens. "Federal Aviation Administration’s Probability of Detection Testing Results for Structural Health Monitoring (SHM)". In 2021 48th Annual Review of Progress in Quantitative Nondestructive Evaluation. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/qnde2021-75122.
Texto completo da fonteKESSLER, SETH S., e CHRISTINE M. SCHUBERT KABBAN. "COVARIANCE OF LIMIT DEFINING PAIRS (CLDP): A NOVEL APPROACH TO ESTABLISHING DETECTION SENSITIVITY FOR STRUCTURAL HEALTH MONITORING DATA". In Structural Health Monitoring 2023. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/shm2023/36818.
Texto completo da fonteJUNG, SEONHWA, YOUNGCHAN KIM e DOOYOUL LEE. "ANALYSIS OF RELIABILITY AND EFFECTIVENESS OF REPEATED INSPECTIONS BASED ON PROBABILITY OF DETECTION METHOD". In Structural Health Monitoring 2023. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/shm2023/36824.
Texto completo da fonteMEMMOLO, VITTORIO, JOCHEN MOLL, OLIVER SCHACKMANN, STEFFEN FREITAG, ANASTASIIA VOLOVIKOVA, KILIAN TSCHOKE, ENES SAVLI et al. "PROMOTING NOVEL STRATEGIES FOR THE RELIABILITY ASSESSMENT OF GUIDED WAVE BASED SHM SYSTEMS". In Structural Health Monitoring 2023. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/shm2023/36787.
Texto completo da fonteGianneo, A., M. Carboni e M. Giglio. "A preliminary study of multi-parameter POD curves for a guided waves based SHM approach to lightweight materials". In 42ND ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: Incorporating the 6th European-American Workshop on Reliability of NDE. AIP Publishing LLC, 2016. http://dx.doi.org/10.1063/1.4940490.
Texto completo da fonteFong, Jeffrey T., Pedro V. Marcal, Robert Rainsberger, N. Alan Heckert, James J. Filliben, Steven R. Doctor e Ned A. Finney. "A Multi-Scale Failure-Probability-and-NDE-Based Fatigue Life Model for Estimating Component Co-Reliability of Uncracked and Cracked Pipes". In ASME 2021 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/pvp2021-62169.
Texto completo da fonte