Literatura científica selecionada sobre o tema "Sensors and actuators placement"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Sensors and actuators placement".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Sensors and actuators placement"
CHEN, KEVIN K., e CLARENCE W. ROWLEY. "H2 optimal actuator and sensor placement in the linearised complex Ginzburg–Landau system". Journal of Fluid Mechanics 681 (20 de junho de 2011): 241–60. http://dx.doi.org/10.1017/jfm.2011.195.
Texto completo da fonteŠolek, Peter, e Marek Maták. "An Active Control of the Thin-Walled Mechanical Systems". Applied Mechanics and Materials 611 (agosto de 2014): 22–31. http://dx.doi.org/10.4028/www.scientific.net/amm.611.22.
Texto completo da fonteMersch, Johannes, Najmeh Keshtkar, Henriette Grellmann, Carlos Alberto Gomez Cuaran, Mathis Bruns, Andreas Nocke, Chokri Cherif, Klaus Röbenack e Gerald Gerlach. "Integrated Temperature and Position Sensors in a Shape-Memory Driven Soft Actuator for Closed-Loop Control". Materials 15, n.º 2 (10 de janeiro de 2022): 520. http://dx.doi.org/10.3390/ma15020520.
Texto completo da fonteSeyed Sakha, Masoud, e Hamid Reza Shaker. "Optimal sensors and actuators placement for large-scale unstable systems via restricted genetic algorithm". Engineering Computations 34, n.º 8 (6 de novembro de 2017): 2582–97. http://dx.doi.org/10.1108/ec-04-2016-0138.
Texto completo da fonteJohnson, Marty E., Luiz P. Nascimento, Mary Kasarda e Chris R. Fuller. "The Effect of Actuator and Sensor Placement on the Active Control of Rotor Unbalance". Journal of Vibration and Acoustics 125, n.º 3 (18 de junho de 2003): 365–73. http://dx.doi.org/10.1115/1.1569946.
Texto completo da fonteSoman, Rohan, Kaleeswaran Balasubramaniam, Ali Golestani, Michał Karpiński, Pawel Malinowski e Wieslaw Ostachowicz. "Actuator placement optimization for guided waves based structural health monitoring using fibre Bragg grating sensors". Smart Materials and Structures 30, n.º 12 (1 de novembro de 2021): 125011. http://dx.doi.org/10.1088/1361-665x/ac31c4.
Texto completo da fonteHeck, L. P., J. A. Olkin e K. Naghshineh. "Transducer Placement for Broadband Active Vibration Control Using a Novel Multidimensional QR Factorization". Journal of Vibration and Acoustics 120, n.º 3 (1 de julho de 1998): 663–70. http://dx.doi.org/10.1115/1.2893881.
Texto completo da fonteGAWRONSKI, W. "SIMULTANEOUS PLACEMENT OF ACTUATORS AND SENSORS". Journal of Sound and Vibration 228, n.º 4 (dezembro de 1999): 915–22. http://dx.doi.org/10.1006/jsvi.1999.2466.
Texto completo da fonteNandy, Animesh, Debabrata Chakraborty e Mahesh S. Shah. "Optimal Sensors/Actuators Placement in Smart Structure Using Island Model Parallel Genetic Algorithm". International Journal of Computational Methods 16, n.º 06 (27 de maio de 2019): 1840018. http://dx.doi.org/10.1142/s0219876218400182.
Texto completo da fonteHuang, Xiu Feng, Ming Hong e Hong Yu Cui. "The Optimal Location of Piezoelectric Sensor/Actuator Based on Adaptive Genetic Algorithm". Applied Mechanics and Materials 635-637 (setembro de 2014): 799–804. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.799.
Texto completo da fonteTeses / dissertações sobre o assunto "Sensors and actuators placement"
Szczepanski, Robert Walter. "Optimal placement of actuators and sensors for vibration control using genetic algorithms". Thesis, University of Newcastle Upon Tyne, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341754.
Texto completo da fontePotami, Raffaele. "Optimal sensor/actuator placement and switching schemes for control of flexible structures". Worcester, Mass. : Worcester Polytechnic Institute, 2008. http://www.wpi.edu/Pubs/ETD/Available/etd-042808-124333/.
Texto completo da fonteKeywords: hybrid system, PZT actuators, performance enchancement, actuator placement, actuator switching. Includes bibliographical references (leaves 102-108).
Polyzos, Dimitrios. ""Measuring System Properties & Structured Diagnostics for the Selection of Sensors, Actuators Placement & Eigenstructure Assignment"". Thesis, City University London, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.524712.
Texto completo da fonteSuwit, Pulthasthan Information Technology & Electrical Engineering Australian Defence Force Academy UNSW. "Optimal placement of sensor and actuator for sound-structure interaction system". Awarded by:University of New South Wales - Australian Defence Force Academy. School of Information Technology and Electrical Engineering, 2006. http://handle.unsw.edu.au/1959.4/38741.
Texto completo da fonteJha, Akhilesh K. "Vibration Analysis and Control of an Inflatable Toroidal Satellite Component Using Piezoelectric Actuators and Sensors". Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/28243.
Texto completo da fontePh. D.
MURUGAN, JAYA MAHESH. "Vibration monitoring and control of industrial structures". Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2858351.
Texto completo da fonteBrakna, Mohammed. "Sensor and actuator optimal location for dynamic controller design. Application to active vibration reduction in a galvanizing process". Electronic Thesis or Diss., Université de Lorraine, 2023. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0152_BRAKNA.pdf.
Texto completo da fonteThe aims of the present PhD thesis are to determine a model that is both sufficiently accurate and numerically exploitable to propose optimal placement of sensors and actuators for active vibration control in a galvanizing line. A continuous hot-dip galvanizing process consists in covering a metal (here: a steel band) by a protective layer of zinc which avoids the corrosion due to the air. The thickness of this layer must be constant to guarantee the mechanical properties and surface condition of the product. In a galvanizing line, the moving steel strip is heated and then immersed in a liquid zinc bath before being wiped out by nozzles projecting air. The air flow, as well as the rotation of the driving rolls, among other things, creates vibrations affecting the wiping process and thus the regularity of the zinc deposit. Active control is therefore necessary, for example by means of electromagnets placed on either side of the moving steel strip. In a first step, a behavioral model of the steel strip taking into account the presence and propagation of vibrations was obtained by spatial discretization of a partial differential equation. This state space model was validated in simulation and experimentally on a pilot galvanizing line of ArcelorMittal Research in Maizières-lès-Metz. Once this model is established, the objective of the study is to find the optimal placement of sensors, to measure the vibrations of the strip as efficiently as possible, but also of actuators to minimize the amplitude of these vibrations by an appropriate control law. These problems of optimal placement are at the heart of the issues of active vibration control and are found in many fields of application. An optimal placement method based on Gramian maximization has been proposed in order to reduce the impact of disturbances on the system. Different control strategies have been considered such as (i) observed state feedback based on Kalman filter and LQ regulator; and (ii) extended observed state feedback to improve the results by also taking into account the disturbance estimation provided by a PI (proportional-integral) observer. Simulation and experimental results illustrate the thesis contributions
Perini, Efrain Araujo [UNESP]. "Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward". Universidade Estadual Paulista (UNESP), 2009. http://hdl.handle.net/11449/94510.
Texto completo da fonteFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Este trabalho apresenta o desenvolvimento de uma análise teórica do desempenho de um sistema de controle ativo utilizando mancais magnéticos como atuadores de não-contato para a redução de vibrações em rotores. São analisados três modelos de rotores, sendo que em um deles aplica-se apenas o controle feedback e os outros são suportados apenas por mancais magnéticos, os quais também são os atuadores do controlador. Assim, Luna arquitetura de controle tipo feedforward é empregada sobreposta ao sistema de controle feedback dos atuadores nestes dois modelos, sendo urna análise realizada em relação ao desempenho do sistema de controle quanto às diferentes geometrias de distribuição de massa acopladas ao eixo do rotor. O enfoque principal deste trabalho é voltado para a análise do desempenho do sistema de controle em função da posição e quantidade dos sensores de erro (onde se deseja minimizar as vibrações) em relação à posição dos atuadores e das forças de excitação. As excitações são do tipo síncronas e sub-síncronas que normalmente aparecem em rotores com elevadas velocidades de rotação, como as turbomáquinas. Também é realizada urna análise das forças de controle necessárias a serem aplicadas pelos atuadores para se obter urna redução dos níveis de vibração do rotor na posição dos sensores de erro do sistema feedforward. A análise é executada empregando modelos de rotores desenvolvidos pelo método da matriz de impedância. Esta pesquisa também apresenta Luna aplicação da técnica de controle Feedforward em acústica, que realiza a depuração da voz para comunicação em ambientes ruidosos.
This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Perini, Efrain Araujo. "Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward /". Ilha Solteira : [s.n.], 2009. http://hdl.handle.net/11449/94510.
Texto completo da fonteAbstract: This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Orientador: Luiz de Paula do Nascimento
Coorientador: Vicente Lopes Junior
Banca: Gilberto Pechoto de Melo
Banca: Kátia Luchese Cavalca Dedini
Mestre
Mitwalli, Ahmed Hamdi. "Polymer gel actuators and sensors". Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9969.
Texto completo da fonteIncludes bibliographical references (p. [351]-361).
by Ahmed Hamdi Mitwalli.
Sc.D.
Livros sobre o assunto "Sensors and actuators placement"
K, Kincaid Rex, e Langley Research Center, eds. Optimization strategies for sensor and actuator placement. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.
Encontre o texto completo da fonteK, Kincaid Rex, e Langley Research Center, eds. Optimization strategies for sensor and actuator placement. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.
Encontre o texto completo da fonteCenter, Langley Research, ed. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Encontre o texto completo da fonteCenter, Langley Research, ed. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Encontre o texto completo da fonteOsada, Yoshihito. Polymer Sensors and Actuators. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000.
Encontre o texto completo da fonteVigna, Benedetto, Paolo Ferrari, Flavio Francesco Villa, Ernesto Lasalandra e Sarah Zerbini, eds. Silicon Sensors and Actuators. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-80135-9.
Texto completo da fonteBusch-Vishniac, Ilene J. Electromechanical Sensors and Actuators. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-1434-2.
Texto completo da fonteBrauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2006. http://dx.doi.org/10.1002/0471777714.
Texto completo da fonteBrauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118779262.
Texto completo da fonteRupitsch, Stefan Johann. Piezoelectric Sensors and Actuators. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-57534-5.
Texto completo da fonteCapítulos de livros sobre o assunto "Sensors and actuators placement"
Khapalov, Alexander Y. "Degenerate Sensors in Source Localization and Sensor Placement Problems". In Mobile Point Sensors and Actuators in the Controllability Theory of Partial Differential Equations, 123–43. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60414-5_8.
Texto completo da fonteGawronski, Wodek K. "Actuator and Sensor Placement". In Dynamics and Control of Structures, 100–128. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-0-387-21855-7_7.
Texto completo da fonteLi, Xu, Amiya Nayak, David Simplot-Ryl e Ivan Stojmenovic. "Sensor Placement in Sensor and Actuator Networks". In Wireless Sensor and Actuator Networks, 263–94. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470570517.ch10.
Texto completo da fonteGawronski, Wodek. "Balanced sensor and actuator placement". In Balanced Control of Flexible Structures, 107–36. Berlin, Heidelberg: Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/3540760172_5.
Texto completo da fonteUsher, M. J., e D. A. Keating. "Actuators". In Sensors and Transducers, 131–46. London: Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13345-1_9.
Texto completo da fonteKatebi, Reza, Michael A. Johnson e Jacqueline Wilkie. "Sensors and Actuators". In Advances in Industrial Control, 144–65. London: Springer London, 1999. http://dx.doi.org/10.1007/978-1-4471-0423-0_6.
Texto completo da fonteSciavicco, Lorenzo, e Bruno Siciliano. "Actuators and Sensors". In Modelling and Control of Robot Manipulators, 295–320. London: Springer London, 2000. http://dx.doi.org/10.1007/978-1-4471-0449-0_8.
Texto completo da fonteAamo, Ole Morten, e Miroslav Krstić. "Sensors and Actuators". In Flow Control by Feedback, 179–83. London: Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-3805-1_6.
Texto completo da fonteMarkley, F. Landis, e John L. Crassidis. "Sensors and Actuators". In Fundamentals of Spacecraft Attitude Determination and Control, 123–81. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0802-8_4.
Texto completo da fonteGenta, Giancarlo. "Actuators and Sensors". In Introduction to the Mechanics of Space Robots, 427–82. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-1796-1_7.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Sensors and actuators placement"
Kameyama, Masaki, e Hisao Fukunaga. "Optimal Placement of Sensors and Actuators for Modal Measurement/Control of CFRP Laminated Plates". In ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2008. http://dx.doi.org/10.1115/smasis2008-416.
Texto completo da fonteSpäh, Britta, Rudolf Sebastian Schittenhelm e Stephan Rinderknecht. "Optimal Sensor and Actuator Placement for Active Vibration Control Systems". In ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ncad2012-0982.
Texto completo da fonteHanagud, S., C. C. Won e M. W. Obal. "Optimal Placement of Piezoceramic Sensors and Actuators". In 1988 American Control Conference. IEEE, 1988. http://dx.doi.org/10.23919/acc.1988.4790034.
Texto completo da fonteTrease, Brian, e Sridhar Kota. "Topology Synthesis of Compliant Systems With Embedded Actuators and Sensors". In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49688.
Texto completo da fonteAl-Masoud, Nidal, e Tarunraj Singh. "Optimal Actuator/Sensor Placement for Control of Combustion Instabilities". In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/dsc-24562.
Texto completo da fonteAlnuaimi, Mohammed, Abdulaziz BuAbdulla, Tarcísio Silva, Sumaya Altamimi, Dong-Wook Lee e Mohamed Al Teneiji. "Active Vibration Control of Piezoelectric Beam Using the PID Controller". In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-70960.
Texto completo da fonteGabbert, U., I. Schulz e C. T. Weber. "Actuator Placement in Smart Structures by Discrete-Continuous Optimization". In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-3937.
Texto completo da fonteTrease, Brian P., e Sridhar Kota. "Synthesis of Adaptive and Controllable Compliant Systems With Embedded Actuators and Sensors". In ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99266.
Texto completo da fonteShelley, Franz J., e William W. Clark. "Active Mode Localization in Distributed Parameter Systems With Consideration of Limited Actuator Placement". In ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0575.
Texto completo da fonteSEPULVEDA, A., e L. SCHMIT. "Optimal Placement of Actuators and Sensors in Control Augmented Structural Optimization". In 31st Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1055.
Texto completo da fonteRelatórios de organizações sobre o assunto "Sensors and actuators placement"
Almeida, Oscar J., Brian G. Dixon, Jill H. Hardin, John P. Sanford e Myles Walsh. High Temperature Smart Sensors and Actuators. Fort Belvoir, VA: Defense Technical Information Center, agosto de 1992. http://dx.doi.org/10.21236/ada256985.
Texto completo da fonteKrulewich, D. A. Handbook of actuators and edge alignment sensors. Office of Scientific and Technical Information (OSTI), novembro de 1992. http://dx.doi.org/10.2172/6788910.
Texto completo da fonteMATERIALS SYSTEMS INC CONCORD MA. Cost-Effective Method for Synthesizing Innovative Transducer Materials for Sensors and Actuators. Fort Belvoir, VA: Defense Technical Information Center, junho de 1994. http://dx.doi.org/10.21236/ada282339.
Texto completo da fonteTed Quinn e Jerry Mauck. Digial Technology Qualification Task 2 - Suitability of Digital Alternatives to Analog Sensors and Actuators. Office of Scientific and Technical Information (OSTI), setembro de 2012. http://dx.doi.org/10.2172/1057681.
Texto completo da fonteCline, Joseph I. Surface Absorption Polarization Sensors (SAPS), Final Technical Report, Laser Probing of Immobilized SAPS Actuators Component. Office of Scientific and Technical Information (OSTI), abril de 2010. http://dx.doi.org/10.2172/977056.
Texto completo da fonteBeshouri, Greg. PR-309-14212-R01 Field Demonstration of Fully Integrated NSCR System. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), janeiro de 2019. http://dx.doi.org/10.55274/r0011545.
Texto completo da fonteRatmanski, Kiril, e Sergey Vecherin. Resilience in distributed sensor networks. Engineer Research and Development Center (U.S.), outubro de 2022. http://dx.doi.org/10.21079/11681/45680.
Texto completo da fonteBeshouri. PR-309-08208-R01 A Survey of Diagnostics Techniques for Compressor Engines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), setembro de 2009. http://dx.doi.org/10.55274/r0010730.
Texto completo da fonteDasberg, Shmuel, Jan W. Hopmans, Larry J. Schwankl e Dani Or. Drip Irrigation Management by TDR Monitoring of Soil Water and Solute Distribution. United States Department of Agriculture, agosto de 1993. http://dx.doi.org/10.32747/1993.7568095.bard.
Texto completo da fonteTarko, Andrew P., Mario A. Romero, Vamsi Krishna Bandaru e Cristhian Lizarazo. TScan–Stationary LiDAR for Traffic and Safety Applications: Vehicle Interpretation and Tracking. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317402.
Texto completo da fonte