Literatura científica selecionada sobre o tema "Sensitive film deposition"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Sensitive film deposition".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Sensitive film deposition"
Eljali, Ahmed, Irwana Nainggolan, Shahrir Hashim e Tulus Ikhsan Nasution. "Highly Response and Sensitive Copper Sensors Based on Chitosan Films". Advanced Materials Research 1125 (outubro de 2015): 255–59. http://dx.doi.org/10.4028/www.scientific.net/amr.1125.255.
Texto completo da fonteConstantinoiu, Izabela, Dana Miu e Cristian Viespe. "SAW Hydrogen Sensors with Pd/SnO2 Layers". Materials 15, n.º 22 (13 de novembro de 2022): 8012. http://dx.doi.org/10.3390/ma15228012.
Texto completo da fonteEljali, Ahmed, Irwana Nainggolan, Shahrir Hashim, Tulus Ikhsan Nasution e Nur Zurihan Abd Wahab. "Fabrication of Chitosan-Polyethylene Oxide Polymeric Thin Film Using Electrochemical Deposition for Detection of Volatile Organic Compounds". Key Engineering Materials 744 (julho de 2017): 359–63. http://dx.doi.org/10.4028/www.scientific.net/kem.744.359.
Texto completo da fonteYunus, Yusniza, Nurul Adlin Mahadzir, Mohamed Nainar Mohamed Ansari, Tg Hasnan Tg Abd Aziz, Atiqah Mohd Afdzaluddin, Hafeez Anwar, Mingqing Wang e Ahmad Ghadafi Ismail. "Review of the Common Deposition Methods of Thin-Film Pentacene, Its Derivatives, and Their Performance". Polymers 14, n.º 6 (10 de março de 2022): 1112. http://dx.doi.org/10.3390/polym14061112.
Texto completo da fonteKuk, Seoung Woo, Seok Hwan Bang, In Hoe Kim, Sun Yeol Jeon, Hyeong Tag Jeon, Hyung Ho Park e Ho Jung Chang. "Chemical and Electrical Properties of ZnS Deposited with DEZ and H2S by Atomic Layer Deposition Method". Materials Science Forum 544-545 (maio de 2007): 689–92. http://dx.doi.org/10.4028/www.scientific.net/msf.544-545.689.
Texto completo da fonteLiu, Huan, Shan Shan Wang, Chang Long Cai e Shun Zhou. "Uncooled Infrared Bolometer Arrays with α-Si and Metal Films". Materials Science Forum 663-665 (novembro de 2010): 421–24. http://dx.doi.org/10.4028/www.scientific.net/msf.663-665.421.
Texto completo da fonteMessier, Russell. "Deposition Processes". MRS Bulletin 13, n.º 12 (dezembro de 1988): 29–32. http://dx.doi.org/10.1557/s0883769400063661.
Texto completo da fonteRyu, Hyun Wook, Yong Joo Park, Hyo Sup Noh e Jin Seong Park. "Characteristics of SnO2 Thin Films Deposited by RF Magnetron Sputtering". Materials Science Forum 449-452 (março de 2004): 993–96. http://dx.doi.org/10.4028/www.scientific.net/msf.449-452.993.
Texto completo da fonteYoshida, Kentaro, Yu Kashimura, Toshio Kamijo, Tetsuya Ono, Takenori Dairaku, Takaya Sato, Yoshitomo Kashiwagi e Katsuhiko Sato. "Decomposition of Glucose-Sensitive Layer-by-Layer Films Using Hemin, DNA, and Glucose Oxidase". Polymers 12, n.º 2 (4 de fevereiro de 2020): 319. http://dx.doi.org/10.3390/polym12020319.
Texto completo da fonteLima, Roberto R., Leonardo F. Hernandez, Edsion Pecoraro, Estevão Rosim-Fachini e Maria L. P. da Silva. "Composite Material Sensitive to Volatile Organic Compounds". Materials Science Forum 730-732 (novembro de 2012): 289–94. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.289.
Texto completo da fonteTeses / dissertações sobre o assunto "Sensitive film deposition"
Le, Pennec Fabien. "Développement de microcapteurs pour la mesure de dioxyde de carbone (CO2) : application au suivi de la qualité de l’air". Electronic Thesis or Diss., Aix-Marseille, 2022. http://www.theses.fr/2022AIXM0148.
Texto completo da fonteUnlike outdoor air pollution, indoor air pollution remained relatively understudied until the early 2000s. However, we spend on average 85% of our time in closed environments (home, offices, transport, etc. in which we are exposed to many pollutants. Numerous studies have shown that measuring the concentration of carbon dioxide makes it possible to assess the confinement of indoor air. To measure pollutants, we can distinguish between analyzers and microsensors, each with its advantages and disadvantages. In the case of indoor air quality, resistive type microsensors appear to be the most appropriate solution, due to their low cost, high sensitivity, possible miniaturization and low power consumption. The detection phenomenon is based on the variation of the electrical resistance of the sensitive element in response to a gas adsorption rate. My research work has focused on the study of the sensitive layer. We used the screen-printing deposit method, a simple, fast and inexpensive technique. The crystalline structure and the morphology could be determined as well as the identification of the chemical substances present in our materials according to physico-chemical characterization techniques. Our results showed that the sensors made from La2O2CO3 and BaTiO3, respectively, present good performances, with a high sensitivity to CO2, and a good repeatability rate
Zhang, Rong. "Zinc Oxide Thin Films for Dye-Sensitized Solar Cell Applications". Miami University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=miami1186016777.
Texto completo da fonteNateq, Mohammad Hosein. "Enhancing the Photo-electrode Features to Improve the Solar Conversion Efficiency in the Dye-Sensitized Solar Cell". Doctoral thesis, Università degli studi di Trento, 2019. http://hdl.handle.net/11572/243450.
Texto completo da fonteNateq, Mohammad Hosein. "Enhancing the Photo-electrode Features to Improve the Solar Conversion Efficiency in the Dye-Sensitized Solar Cell". Doctoral thesis, Università degli studi di Trento, 2019. http://hdl.handle.net/11572/243450.
Texto completo da fonteDu, Juan [Verfasser]. "Electrochemical deposition of dye-modified ZnO hybrid thin films and their application to flexible dye-sensitized solar cells / Juan Du". Hannover : Technische Informationsbibliothek und Universitätsbibliothek Hannover (TIB), 2013. http://d-nb.info/1032724811/34.
Texto completo da fonteWu, Kuei-Sian, e 吳奎憲. "The influence of thin film deposition technologies on dye-sensitized solar cells". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/00349664421013019959.
Texto completo da fonte樹德科技大學
電腦與通訊系碩士班
103
In this study, the working electrode of dye-sensitized solar cells (DSSCs) based on all titanium substrates were investigated. Experimentally, electrophoretic deposition and anodic oxidation method will be employed to fabricate the working electrodes of flexible DSSCs. The goals of the project aim to build a high performance electrode with low series resistance, highly conducting charge-transfer, high reduction catalytic activity and good stability. Experimental results show that the optimized anodization condition for preparing titanium dioxide (TiO2) on the titanium mesh is 0.035 M of ammonium fluoride, 400 mA of applied current.
Yen-YuChu e 朱彥宇. "Electrophoretic Deposition of TiO2 Films for Dye-Sensitized Solar Cells". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/67739983625349089063.
Texto completo da fonte國立成功大學
化學工程學系碩博士班
98
The charge transfer rate in the nanocrystalline TiO2 electrode govern the performance of a dye-sensitized solar cell(DSSC). In this study, TiO2 colloids derived from a titanate-directed route and used to prepare electrode by two methods: Paste-coating and Electrophoretic Deposition. Nitrogen absorption-desorption and SEM was used to analysis the pore and electrode morphology. In order to compare the difference of charge transfer, IMPS, IMVS, and EIS were used. By the analysis of nitrogen absorption-desorption and SEM, electrophoretic solution has higher surface area, and the electrode morphology was dense packing. Cell performance of electrophoretic electrode was better than paste-coating because of its high current density. IMPS showed a higher electron transfer rate for electrophoretic electrode, but the electron lifetime is shorter by the IMVS analyzing. In EIS testing, the charge collection efficiency and diffusion length were 91% and 43?m, respectively. The dense packing caused the much more dye to absorb, decreased the path for electron transfer, so electrophoretic electrode has higher charge collection efficiency, current density, and lower open-circuit voltage.
Chen, Chang-Yi, e 陳昌詣. "Application and Preparation TiO2 Film on Flexible Dye-Sensitized Solar Cells by Electrophoretic Deposition". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/81400605372982130421.
Texto completo da fonte明志科技大學
化學工程研究所
98
This study mainly investigated the preparation of the working electrode, the modification of the corresponding electrode and the preparation of a dye-sensitized solar cell (DSSC) on a flexible polyethylene terephthalate (PET) substrate. We hoped that this study can effectively improve the efficiency of a flexible DSSC. During processing a DSSC, we used several film formation methods including electrophoretic deposition, mechanical compression and the chemical binding to improve the DSSC. Then we measured the characteristics of the obtained cell via cyclic voltammetry, DC polarization and AC impedance spectroscopy. The experiment results showed that using the multiple electrophoretic depositions to prepare a TiO2 film could cover the cracks formed by the evaporation of the organic solvent and thus provide better film quality. The optimal thickness of a TiO2 film was 15 μm, which can lead to a maximum short–circuit current of a DSSC when the open circuit potential maintained the same value. When magnesium nitrate was added to the solution used in electrophoretic deposition, the obtained TiO2 film was compact and stable on a PET substrate. Furthermore, this study used self-assembled monolayer (SAM) to modify the counter electrode. Then the characteristics of the electrode were changed by SAM. The result showed that the counter electrode coated SAM was not as expected because SAM prevented the redox electrolyte to penetrate, leading to low currents during an electrochemical reaction.
Yong-JinLiou e 劉永進. "Electrophoretic Deposition of Rigid and Flexible TiO2 Films for Dye-Sensitized Solar Cells". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/86805948241123466438.
Texto completo da fonteLiang-CheChen e 陳良哲. "Electrophoretic Deposition of TiO2 Films for Flexible Dye-Sensitized Solar Cells with Backside Illumination". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/20187119800835922863.
Texto completo da fonte國立成功大學
化學工程學系碩博士班
100
We use electrophoretic deposition (EPD) method to deposite TiO2 nanoparticles on the Ti foil, consisting of repetitive short-term depositions with intermediate drying to prepare nanocrystalline TiO2 films for dye-sensitized solar cells (DSSCs). After calcination, the EPD TiO2 films exhibited a more compact TiO2 network. The effect of five factors, i.e., (i) the thickness of platinum film sputtered on the counter electrode, (ii) sintering temperature of TiO2-coated Ti foil, (iii) the concentration of iodine in the electrolyte, (iv) thickness of TiO2 film, (v) the effect of the scattering layer deposited between the Ti foil and the transparent layer are reported for the photovoltaic performance of a back-illuminated flexible dye-sensitized solar cell with Ti foil substrate for the TiO2 layer. Optimization of these five factors yields a solar cell conversion efficiency 7%. X-ray diffraction (XRD), scanning electron micrographs (SEM), UV-Visible spectrophotometer, intensity-modulated photocurrent spectroscopy (IMPS), intensity-modulated photovoltage spectroscopy (IMVS) and electrochemical impedance spectroscopy (EIS) are used to substantiate the explanation.
Livros sobre o assunto "Sensitive film deposition"
J, Bachmann Klaus, e United States. National Aeronautics and Space Administration., eds. P-polarized reflectance spectroscopy: A high sensitive real-time monitoring technique to study surface kinetics under steady state epitaxial deposition conditions. [Washington, D.C: National Aeronautics and Space Administration, 1995.
Encontre o texto completo da fonteJ, Bachmann Klaus, e United States. National Aeronautics and Space Administration., eds. P-polarized reflectance spectroscopy: A high sensitive real-time monitoring technique to study surface kinetics under steady state epitaxial deposition conditions. [Washington, D.C: National Aeronautics and Space Administration, 1995.
Encontre o texto completo da fonteJ, Bachmann Klaus, e United States. National Aeronautics and Space Administration., eds. P-polarized reflectance spectroscopy: A high sensitive real-time monitoring technique to study surface kinetics under steady state epitaxial deposition conditions. [Washington, D.C: National Aeronautics and Space Administration, 1995.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Sensitive film deposition"
Datta, Saswati, Yoon-Gi Kim, P. A. Dowben, John A. Glass, Shreyas S. Kher, Scott A. Peters e James T. Spencer. "Palladium and Aluminum Thin Film Deposition on Thermally Sensitive Substrates From Organometallic Complexes". In Metallized Plastics 3, 65–72. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3416-7_7.
Texto completo da fonteOluwafunmilade, Alabi Kelvin, Zine Abidine, Yasutaka Ando, Yoshimasa Noda e Mitsumasa Iino. "Deposition of Porous Photocatalytic TiO2 Film for Dye-Sensitized Solar Cells by Low-Powered Atmospheric Plasma Spray Equipment". In Renewable Energy and Sustainable Buildings, 945–53. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-18488-9_79.
Texto completo da fonteYamamoto, Kunio, Kenji Sakai e Shinzo Yoshikado. "Preparation of TiO2 Thin Films by Electrophoresis Deposition Method for Dye-Sensitized Solar Cells". In Electroceramics in Japan X, 151–54. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-449-9.151.
Texto completo da fonteWang, Ning, Hong Lin, Jian Bao Li, Xiao Zhan Yang, Luo Zheng Zhang e Yin Dou. "Preparation of TiO2 Nanocrystalline Films by Electrophoretic Deposition and their Application in Dye-Sensitized Solar Cells". In Key Engineering Materials, 2193–95. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.2193.
Texto completo da fonteTlili, Brahim. "Fretting Wear Performance of PVD Thin Films". In Tribology [Working Title]. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.93460.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Sensitive film deposition"
Shao, M., X. L. Tang, D. Wen, Y. Chen e G. Qiu. "Atmospheric pressure glow discharge deposition of thermo-sensitive poly (N-isopropylacrylamide)". In Eighth International Conference on Thin Film Physics and Applications (TFPA13), editado por Junhao Chu e Chunrui Wang. SPIE, 2013. http://dx.doi.org/10.1117/12.2053956.
Texto completo da fonteHigashi, G. S., L. J. Rothberg e C. G. Fleming. "Studies of Laser Chemical Vapor Deposition Using Surface Sensitive Infrared Photoacoustic Spectroscopy". In Microphysics of Surfaces, Beams, and Adsorbates. Washington, D.C.: Optica Publishing Group, 1985. http://dx.doi.org/10.1364/msba.1985.tuc3.
Texto completo da fonteHinrichs, Karsten, Andreas Furchner e Jörg Rappich. "Optical monitoring during the electrochemical deposition of organic layers". In Applied Industrial Spectroscopy. Washington, D.C.: Optica Publishing Group, 2023. http://dx.doi.org/10.1364/ais.2023.am1a.1.
Texto completo da fonteDeshmane, A. A., R. B. Bhosale e D. J. Salunkhe. "Diversified Methodologies to Prepare Metal Oxide Thin Film for Super Capacitor Applications – A Review". In National Conference on Relevance of Engineering and Science for Environment and Society. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.118.60.
Texto completo da fonteSankur, H., e W. Gunning. "Stress and structure in mixed thin TiO2-SiO2 Films". In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1989. http://dx.doi.org/10.1364/oam.1989.mnn4.
Texto completo da fonteBleakie, Alexander, e Dragan Djurdjanovic. "Dynamic Feature Monitoring Technique Applied to Thin Film Deposition Processes in an Industrial PECVD Tool". In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50041.
Texto completo da fonteZhang, F. S., R. H. Wang, H. Angus Macleod, Robert E. Parks e Michael R. Jacobson. "Surface plasmon resonance detection and removal of contamination from metallic film surfaces". In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1987. http://dx.doi.org/10.1364/oam.1987.thh5.
Texto completo da fonteSasaki, Shinichirou, Meng Yang, Ken Suzuki e Hideo Miura. "Highly-Sensitive Graphene Nano-Ribbon-Base Strain Sensor". In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67602.
Texto completo da fontePrenter, Robin, Steven M. Whitaker, Ali Ameri e Jeffrey P. Bons. "The Effects of Slot Film Cooling on Deposition on a Nozzle Guide Vane". In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-27171.
Texto completo da fonteRahmlow, Thomas D., Jeanne E. Lazo-Wasem e Bruce A. Tirri. "Photometric monitoring and control techniques for manufacture of blended optical thin films". In OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oam.1990.thm2.
Texto completo da fonte