Conecte-se

Bibliografias temáticas / Room temperature assembly / Artigos de revistas

Artigos de revistas sobre o tema "Room temperature assembly"

Siga este link para ver outros tipos de publicações sobre o tema: Room temperature assembly.

Autor: Grafiati

Publicado: 14 de setembro de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Room temperature assembly".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Peng, Lin Fa, Dian Kai Qiu, Pei Yun Yi e Xin Min Lai. "Investigation of Thermal Influence on the Assembly of Polymer Electrolyte Membrane Fuel Cell Stacks". Advanced Materials Research 512-515 (maio de 2012): 1509–14. http://dx.doi.org/10.4028/www.scientific.net/amr.512-515.1509.

Texto completo da fonte

Resumo:

The assembly force in a proton exchange membrane fuel cell (PEMFC) stack affects the characteristics of the porosity and electrical conductivity. Generally, the stack is assembled at room temperature while it’s operated at about 80 °Cor even higher. As a result, the assembly pressure can’t keep constant due to thermal expansion. This paper focuses on the contact pressure between membrane electrode assembly (MEA) and bipolar plates in real operations. A three-dimensional finite element (FE) model for the assembly process is established with coupled thermal-mechanical effects. The discipline of contact pressure under thermal-mechanical effect is investigated. A single cell stack is fabricated in house for the analysis of contact pressures on gas diffusion layer at different temperatures. The results show that as the temperature increases, contact pressure increases due to thermal expansion. It indicates that the influence of thermal expansion due to temperature variation should be taken into consideration for the design of the stack assembly process.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Deng, Yuchen, Peng Li, Jiatong Li, Daolai Sun e Huanrong Li. "Color-Tunable Aqueous Room-Temperature Phosphorescence Supramolecular Assembly". ACS Applied Materials & Interfaces 13, n.º 12 (22 de março de 2021): 14407–16. http://dx.doi.org/10.1021/acsami.1c01174.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Chen, Jian, e Wayne A. Weimer. "Room-Temperature Assembly of Directional Carbon Nanotube Strings". Journal of the American Chemical Society 124, n.º 5 (fevereiro de 2002): 758–59. http://dx.doi.org/10.1021/ja017384t.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Dubey, V., E. Beyne, J. Derakhshandeh e I. De Wolf. "Physics of self-aligned assembly at room temperature". Physics of Fluids 30, n.º 1 (janeiro de 2018): 012001. http://dx.doi.org/10.1063/1.5004797.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Yang, Lu-feng, De-qing Chu, Hui-lou Sun e Ge Ge. "Room temperature synthesis of flower-like CaCO3 architectures". New Journal of Chemistry 40, n.º 1 (2016): 571–77. http://dx.doi.org/10.1039/c5nj02141c.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Matteau, Jacques. "NanoBond® Assembly – A Rapid, Room Temperature Soldering Process". International Symposium on Microelectronics 2011, n.º 1 (1 de janeiro de 2011): 000521–26. http://dx.doi.org/10.4071/isom-2011-wa2-paper5.

Texto completo da fonte

Resumo:

Indium Corporation of America has commercialized a new technology that will revolutionize how manufacturers join components using solder materials. (See Figure 1) The joining process is based on the use of reactive multilayer foils as local heat sources. The foils are a new class of nano-engineered materials, in which self-propagating exothermic reactions can be ignited at room temperature through an ignition process. By inserting a multilayer foil between two solder layers and two components, heat generated by the reaction in the foil melts the solder and consequently bonds are completed at room temperature in air, argon or vacuum in approximately one second. The resulting metallic joints exhibit thermal conductivities two orders of magnitude higher, and thermal resistivity’s an order of magnitude lower, than current commercial TIMs. The use of reactive foils as a local heat source eliminates the need for torches, furnaces, or lasers, speeds the soldering processes, and dramatically reduces the total heat that is needed. Thus, temperature-sensitive or small components can be joined without thermal damage or excessive heating. In addition, mismatches in thermal contraction on cooling can be avoided because components see very small increases in temperature. This is particularly beneficial for joining metals to ceramics. The fabrication and characterization of the reactive foils is described, and the value proposition for NanoBonding is presented. This presentation also shows the applicability of this platform technology to many areas of packaging including Thermal Interface Materials, microelectronics, optoelectronics, and Light Emitting Diodes (LEDs)

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Toda, Kenji, Hiroki Sato, Akira Sugawara, Saori Tokuoka, Kazuyoshi Uematsu e Mineo Sato. "Self-Assembly of Perovskite Nanosheet Colloid at Room Temperature". Key Engineering Materials 301 (janeiro de 2006): 227–30. http://dx.doi.org/10.4028/www.scientific.net/kem.301.227.

Texto completo da fonte

Resumo:

We present a new method for soft chemical synthesis of perovskite materials. Perovskite K1-xLixNbO3 powders are produced by an ion-exchange reaction of layered perovskite precursor, K2NbO3F, with lithium chloride in water at room temperature. X-ray diffraction and X-ray fluorescent spectroscopic studies show that a mechanism of the ion-exchange reaction is a self-assembly between the perovskite nanosheets in aqueous solution.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Ramanath, G., J. D'Arcy-Gall, T. Maddanimath, A. V. Ellis, P. G. Ganesan, R. Goswami, A. Kumar e K. Vijayamohanan. "Templateless Room-Temperature Assembly of Nanowire Networks from Nanoparticles". Langmuir 20, n.º 13 (junho de 2004): 5583–87. http://dx.doi.org/10.1021/la0497649.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Huang, Ling-Yuang, Eric W. Bohannan, Chen-Jen Hung e Jay A. Switzer. "Room-Temperature Electrochemical Assembly of Copper/Cuprous Oxide Nanocomposites". Israel Journal of Chemistry 37, n.º 2-3 (1997): 297–301. http://dx.doi.org/10.1002/ijch.199700034.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Li, Jiazhuo, Ying Wang, Xiaoming Jiang e Peng Wu. "An aqueous room-temperature phosphorescent probe for Gd³⁺". Chemical Communications 58, n.º 16 (2022): 2686–89. http://dx.doi.org/10.1039/d1cc06229h.

Texto completo da fonte

Resumo:

An aqueous room-temperature phosphorescent (RTP) probe for Gd3+ is reported here based on the adaptive assembly between Gd3+, AMP and fluorescein, and the resultant aqueous room-temperature phosphorescence.

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Li, Lei, Zhongyu Lian, Xi Yan, Meng Xia e Mingcui Zhang. "An evaporation induced self-assembly approach to prepare polymorphic carbon dot fluorescent nanoprobes for protein labelling". Chemical Communications 54, n.º 93 (2018): 13123–26. http://dx.doi.org/10.1039/c8cc05860a.

Texto completo da fonte

Resumo:

Herein, we report a novel route to prepare polymorphic carbon dot fluorescent probes via the evaporation-induced self-assembly of glutaraldehyde and carbon dots, which first usually form carbon nanoclusters which then could self-assemble to form carbon nanocrystals, nanospheres or nanofibers in different ionic strength solutions at room temperature.

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Zhao, Wei, Xinyu Song, Zhilei Yin, Chunhua Fan, Guozhu Chen e Sixiu Sun. "Self-assembly of ZnO nanosheets into nanoflowers at room temperature". Materials Research Bulletin 43, n.º 11 (novembro de 2008): 3171–76. http://dx.doi.org/10.1016/j.materresbull.2007.11.013.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

BISCHOFF, GERLINDE, ROBERT BISCHOFF e SIEGFRIED HOFFMANN. "Porphyrin self-assembly as template for RNA?" Journal of Porphyrins and Phthalocyanines 05, n.º 09 (setembro de 2001): 691–701. http://dx.doi.org/10.1002/jpp.381.

Texto completo da fonte

Resumo:

The self-assembly of chiral porphyrin molecules HpD (hematoporphyrin IX derivative) has been shown to form helical fibers in low salt aqueous conditions. The spectroscopic (UV and circular dichroism (CD)), thermodynamic (Tm, differential scanning calorimetry (DSC)) and microscopic (light and scanning force microscopy (SFM)) examinations of the HpD properties were performed individually and in the presence of nucleic acid double strands (15–60 °C, 0–50 mM NaCl ). The asymmetric HpD molecules themselves at room temperature show sharp positive or negative CD signals, which increase enormously with HpD concentration. The data show strong evidence for the external self-stacking interaction of HpD , pure and in the presence of polynucleotides. At low salt concentration (<40 mM NaCl , pH 7) the spectra change completely by increasing the temperature. At 35 to 40 °C RNA-similar spectra of the pure HpD self-assemblies (without nucleic acids) occur. At higher temperatures the aggregates become unstable and break off. At room temperature the helical structure of the fibers could be visualized by SFM investigations. Molecular modeling analysis offers dynamic arrangements of the self-assemblies from stacks to spiral-like superstructures with increasing temperature. Hydrogen bonding, electron transferring and electrostatic interactions determine the shape of the proposed highly flexible arrangements. Moreover, the interrelation between the HpD stacks and the helix of the polynucleotides was studied. The calculated low transition energies indicate the importance of these structures as a crossing link. All data are discussed in favor of a hypothetical evolutionary matrix role in porphyrin self-assembly for RNA.

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Tang, Jiang, Di Li, Chunyan Sun, Longzhen Zheng e Jinghong Li. "Temperature dependant self-assembly of surfactant Brij 76 in room temperature ionic liquid". Colloids and Surfaces A: Physicochemical and Engineering Aspects 273, n.º 1-3 (fevereiro de 2006): 24–28. http://dx.doi.org/10.1016/j.colsurfa.2005.07.030.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Dai, Ziwen, Hoi Man Leung, Qi Gao, Fei Wang, Sze Wing Wong, Ling Sum Liu, Yu Ju Au, King Wai Chiu Lai e Pik Kwan Lo. "Facile construction of a DNA tetrahedron in unconventional ladder-like arrangements at room temperature". Nanoscale Advances 1, n.º 3 (2019): 1240–48. http://dx.doi.org/10.1039/c8na00323h.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Chen, Zehua, Ulrich Gengenbach, Xinnan Liu, Alexander Scholz, Lukas Zimmermann, Jasmin Aghassi-Hagmann e Liane Koker. "An Automated Room Temperature Flip-Chip Mounting Process for Hybrid Printed Electronics". Micromachines 13, n.º 4 (8 de abril de 2022): 583. http://dx.doi.org/10.3390/mi13040583.

Texto completo da fonte

Resumo:

Printing technology and mounting technology enable the novel field of hybrid printed electronics. To establish a hybrid printed system, one challenge is that the applied mounting process meets the requirements of functional inks and substrates. One of the most common requirements is low process temperature. Many functional inks and substrates cannot withstand the high temperatures required by traditional mounting processes. In this work, a standardized interconnection and an automated bump-less flip-chip mounting process using a room temperature curing conductive adhesive are realised. With the proposed process, the conductive adhesive selected for the standardized interconnection can be dispensed uniformly, despite its increase of viscosity already during pot time. Electrical and mechanical performance of the interconnection are characterized by four terminal resistance measurement and shear test. The herein proposed automated process allows for fabrication of hybrid printed devices in larger batch sizes than manual assembly processes used beforehand and thus, more comprehensive evaluation of device parameters. This is successfully demonstrated in a first application, a novel hybrid printed security device. The room temperature mounting process eliminates any potentially damaging thermal influence on the performance of the printed circuits that might result from other assembly techniques like soldering.

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Tanisawa, Hidekazu, Kohei Hiyama, Takeshi Anzai, Hiroki Takahashi, Yoshinori Murakami, Shinji Sato, Kinuyo Watanabe, Fumiki Kato e Hiroshi Sato. "Reliability Assessment of Flip-Chip Assembly of Al Bumps". Journal of Microelectronics and Electronic Packaging 12, n.º 2 (1 de agosto de 2015): 92–97. http://dx.doi.org/10.4071/imaps.459.

Texto completo da fonte

Resumo:

This article reports on a flip-chip bonding technology using an Al bump at high temperatures, such as for SiC semiconductors. In recent years, double-sided mounting structures have been proposed for purposes of miniaturization and low inductance. The surface-mounting method requires durability against high temperatures. We propose a new technique for the flip-chip bonding of an Al bump made from bonding wire. The recrystallization temperature of Al is under 250°C. As a result, there is an expectation of mitigating mechanical stress between the chip and the bonded substrate. We conducted a high-temperature aging test at 250°C for 3,000 h and a thermal shock test between −40°C and 250°C for 3,000 cycles. Results indicate that the shear strength of the Al bump meets the requirements specified in the IEC60749-19 guideline up to 2,000 cycles at room temperature.

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

TANISAWA, Hidekazu, Kohei HIYAMA, Takeshi ANZAI, Hiroki TAKAHASHI, Yoshinori MURAKAMI, Shinji SATO, Kinuyo WATANABE, Fumiki KATO e Hiroshi SATO. "Reliability Assessment of Flip-chip Assembly of Al Bumps". International Symposium on Microelectronics 2014, n.º 1 (1 de outubro de 2014): 000301–6. http://dx.doi.org/10.4071/isom-tp46.

Texto completo da fonte

Resumo:

This paper reports on a flip-chip bonding technology using an aluminum bump at high temperatures, such as for SiC semiconductors. In recent years, double-sided mounting structures have been proposed for the purposes of miniaturization and low inductance. The surface mounting method requires durability to withstand high temperatures. We propose a new technique for the flip-chip bonding of an Al bump made from bonding wire. The recrystallization temperature of aluminum is under 250 °C. As a result, there is an expectation of mitigating mechanical stress between the chip and bonded substrate. A high-temperature exposure test at 250 °C for 3000 hours and a thermal-cycle test between −40 and 250 °C for 3000 cycles have been executed. Results indicate that shear strength of the Al bump meets the requirements set forth in the IEC60749-19 guideline until 2000 cycles at room temperature.

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

Tao, Yulun, Juchuan Li, Anjian Xie, Shikuo Li, Ping Chen, Liping Ni e Yuhua Shen. "Supramolecular self-assembly of three-dimensional polyaniline and polypyrrole crystals". Chem. Commun. 50, n.º 84 (2014): 12757–60. http://dx.doi.org/10.1039/c4cc05559d.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

Losensky, Luisa, Salvatore Chiantia, Gudrun Holland, Michael Laue, Anca Petran, Jürgen Liebscher e Anna Arbuzova. "Self-assembly of a cholesteryl-modified nucleoside into tubular structures from giant unilamellar vesicles". RSC Advances 5, n.º 6 (2015): 4502–10. http://dx.doi.org/10.1039/c4ra11289j.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Samai, Suman, Christos Sapsanis, Sachin P. Patil, Alaa Ezzeddine, Basem A. Moosa, Hesham Omran, Abdul-Hamid Emwas, Khaled N. Salama e Niveen M. Khashab. "A light responsive two-component supramolecular hydrogel: a sensitive platform for the fabrication of humidity sensors". Soft Matter 12, n.º 11 (2016): 2842–45. http://dx.doi.org/10.1039/c6sm00272b.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Nanthakumar, S., D. Rajenthirakumar e S. Avinashkumar. "Influence of temperature on deformation behavior of copper during microextrusion process". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, n.º 9 (8 de janeiro de 2020): 1797–808. http://dx.doi.org/10.1177/0954406219899114.

Texto completo da fonte

Resumo:

Micro scale deformational behavior of metals is improved upon increasing the room temperature. Further, the drawbacks of micro forming caused by size effects are reduced significantly. In the current work, investigation on the material behavior of copper at elevated temperature ranging from room temperature to 200 ℃ is conducted. On the experimental part, a novel micro extrusion die set assembly has been developed along with temperature assistance, where the specimen is heated within the die assembly to study deformation behavior. When the forming temperature is raised, an enlargement of the forming limits is achieved along with a significant reduction in extrusion force. Further, the flow of material inside the die orifice was more uniform, and the micro pin showed a good replication of the die dimensions with homogeneous material deformation. During the increase of extrusion temperature and lubrication conditions (diamond-like carbon coating), the micro pin is more complete with higher dimensional accuracy and surface finish. The investigation on the influence of temperature showed that there is a reduction in microhardness of samples compared to the hardness of samples extruded at room temperature. However, there is a significant reduction of scattering due to homogenizing effect.

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Balogh, Bálint, Péter Gordon, Róbert Kovács, Csaba Nagynémedi, Péter János Szabó e Gábor Harsányi. "Failure Analysis Methods in Electronics Assembly Technology". Materials Science Forum 589 (junho de 2008): 349–54. http://dx.doi.org/10.4028/www.scientific.net/msf.589.349.

Texto completo da fonte

Resumo:

The aim of this paper is to describe a failure analysis methodology applicable to reveal the root causes of electronic assembly failures. The most relevant properties of the applied techniques, i.e. optical microscopy, X-ray microstructure analysis, SEM (scanning electron microscopy) combined with EDX (energy dispersive X-ray spectroscopy) analysis, are given. Three recent failure analysis case studies are also presented. In case of a burnt component the microwire and the leadframe formed AlCu intermetallic compound in the length of several millimeters. The low joint strength of gullwing leads were deduced back to paste printing and wetting problems. The fracture surface morphology of a joint broken on the field showed different structure from the ones broken at room temperature. It was revealed that SnPb solder fracture surface is different at room temperature and above 100°C.

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Liu, Zhenzhong, Gongjun Zhang, Wei Lu, Youju Huang, Jiawei Zhang e Tao Chen. "UV light-initiated RAFT polymerization induced self-assembly". Polymer Chemistry 6, n.º 34 (2015): 6129–32. http://dx.doi.org/10.1039/c5py00907c.

Texto completo da fonte

Resumo:

Reversible addition–fragmentation chain transfer (RAFT) polymerization induced self-assembly (PISA) initiated by UV light is exploited as a new strategy to prepare polymeric nanomicelles at room temperature.

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

Luo, Yang-Hui, Qing-Ling Liu, Li-Jing Yang, Yu Sun, Jin-Wen Wang, Chao-Qun You e Bai-Wang Sun. "Magnetic observation of above room-temperature spin transition in vesicular nano-spheres". Journal of Materials Chemistry C 4, n.º 34 (2016): 8061–69. http://dx.doi.org/10.1039/c6tc02796b.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Suzuki, Akira, Munetaka Akita e Michito Yoshizawa. "Amphiphilic tribranched scaffolds with polyaromatic panels that wrap perylene stacks displaying unusual emissions". Chemical Communications 52, n.º 65 (2016): 10024–27. http://dx.doi.org/10.1039/c6cc04823d.

Texto completo da fonte

Resumo:

A spherical assembly containing a perylene stack, prepared from a rigid tribranched scaffold and perylene, exhibits unusual Y-emission in water at room temperature. In contrast, an analogous assembly from a flexible scaffold and perylene shows E-emission under the same conditions.

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

Odunze, Uchechukwu, Fionn O'Brien, Lisa Godfrey, Andreas Schätzlein e Ijeoma Uchegbu. "Unusual Enthalpy Driven Self Assembly at Room Temperature with Chitosan Amphiphiles". Pharmaceutical Nanotechnology 7, n.º 1 (10 de maio de 2019): 57–71. http://dx.doi.org/10.2174/2211738507666190311123401.

Texto completo da fonte

Resumo:

Background: GCPQ (N-palmitoyl-N-monomethyl-N,N-dimethyl-N,N,N-trimethyl- 6-O-glycolchitosan) is a self-assembling polymer being investigated as a pharmaceutical nano-carrier. GCPQ nanoparticles shuttle drugs across biological barriers, improving drug performance. The exact chemistry of GCPQ is varied by the relative proportion of hydrophobic (N-palmitoyl) and hydrophilic (quaternary ammonium) groups and molecular weight. Objective: We hypothesised that the thermodynamics of self-assembly is controlled by the polymer molecular weight and hydrophobicity. Method: The thermodynamics of self-assembly was investigated using isothermal calorimetry. Results: GCPQs (Mw = 8-15 kDa) formed micellar aggregates at critical micellar concentrations of 1-2.4 µM at 25°C and micellisation was unusually enthalpy driven. There was a positive correlation between ΔHmic and mole% quaternary groups (Q): ΔHmic = 3.8 Q- 159 (r2 = 0.93) and a negative correlation between ΔHmic and molecular weight (Mw): ΔHmic = -13.5 Mw-26.3 (r2 = 0.99). Conclusion: These findings provide insights into the positive drivers of stable selfassemblies, namely hydrophobicity and molecular weight, as both hydrophobicity and molecular weight are associated with an increased enthalpy contribution to micellisation.

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Abdelghany, A. M., A. H. Oraby, Awatif A. Hindi, Doaa M. El-Nagar e Fathia S. Alhakami. "Green synthesis of mixed metallic nanoparticles using room temperature self-assembly". JOURNAL OF ADVANCES IN PHYSICS 13, n.º 2 (16 de março de 2017): 4671–77. http://dx.doi.org/10.24297/jap.v13i2.5942.

Texto completo da fonte

Resumo:

Bimetallic nanoparticles of silver (Ag) and gold (Au) were synthesized at room temperature using Curcumin. Reduction process of silver and gold ions with different molar ratios leads to production of different nanostructures including alloys and core-shells. Produced nanoparticles were characterized simultaneously with FTIR, UV/vis. spectroscopy, transmission electron microscopy (TEM), and Energy-dispersive X-ray (EDAX). UV/vis. optical absorption spectra of as synthesized nanoparticles reveals presence of surface palsmon resonance (SPR) of both silver at (425 nm) and gold at (540 nm) with small shift and broadness of gold band after mixing with resucing and capping agent in natural extract which suggest presence of bimetallic nano structure (Au/Ag). FTIR and EDAX data approve the presence of bimetallic nano structure combined with curcumin extract. TEM micrographs shows that silver and gold can be synthesized separately in the form of nano particles using curcumin extract. Synthesis of gold nano particles in presence of silver effectively enhance and control formation of bi-metallic structure.

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Lu, Lehui, Atsuko Kobayashi, Yasuo Kikkawa, Keiko Tawa e Yukihiro Ozaki. "Oriented Attachment-Based Assembly of Dendritic Silver Nanostructures at Room Temperature". Journal of Physical Chemistry B 110, n.º 46 (novembro de 2006): 23234–41. http://dx.doi.org/10.1021/jp063978c.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

Flory, Justin D., Sandip Shinde, Su Lin, Yan Liu, Hao Yan, Giovanna Ghirlanda e Petra Fromme. "PNA-Peptide Assembly in a 3D DNA Nanocage at Room Temperature". Journal of the American Chemical Society 135, n.º 18 (12 de abril de 2013): 6985–93. http://dx.doi.org/10.1021/ja400762c.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

Sun, Xuping, Yonglan Luo e Junfeng Zhai. "Solution self-assembly-based route towards hexagonal microdisks at room temperature". Inorganic Materials 46, n.º 5 (maio de 2010): 472–75. http://dx.doi.org/10.1134/s0020168510050067.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Shimmin, Robert G., Robert Vajtai, Richard W. Siegel e Paul V. Braun. "Room-Temperature Assembly of Germanium Photonic Crystals through Colloidal Crystal Templating". Chemistry of Materials 19, n.º 8 (abril de 2007): 2102–7. http://dx.doi.org/10.1021/cm062893l.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

JIA, YAOSHUN, QIANWANG CHEN e MINGZAI WU. "ROOM TEMPERATURE SELF-ASSEMBLY GROWTH OF COBALT NANOWIRES UNDER MAGNETIC FIELDS". International Journal of Modern Physics B 19, n.º 15n17 (10 de julho de 2005): 2728–33. http://dx.doi.org/10.1142/s0217979205031602.

Texto completo da fonte

Resumo:

Polycrystalline cobalt nanowires, with average diameter of 80 nm and length about 10 μm, were synthesized in the hydrazine hydrate solution at room temperature under magnetic fields. A seed-mediated growth approach was applied. Magnetic fields induced the growth of nanowires via aligned self-assembly of cobalt nanocrystallites. Magnetic measurements showed that the saturation magnetization (Ms) of the cobalt nanowires synthesized under magnetic field was five times larger than that of the samples prepared without magnetic fields; while the coercivity (Hc) of the sample prepared under magnetic fields was half of that of the sample synthesized without magnetic fields. The reasons for the magnetism changes were discussed.

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Simmons, T. J., N. Maeda, J. Miao, M. Bravo-Sanchez, J. S. Dordick e R. J. Linhardt. "Self-assembly of carbon nanotube films from room temperature ionic liquids". Carbon 58 (julho de 2013): 226–31. http://dx.doi.org/10.1016/j.carbon.2013.02.062.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Yan, Shuang, Gongzheng Zhang, Feibo Li, Li Zhang, Sitong Wang, Huhu Zhao, Qi Ge e Huanjun Li. "Large-area superelastic graphene aerogels based on a room-temperature reduction self-assembly strategy for sensing and particulate matter (PM2.5 and PM10) capture". Nanoscale 11, n.º 21 (2019): 10372–80. http://dx.doi.org/10.1039/c9nr02071c.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Chen, Qiang, Wojciech Zajaczkowski, Johannes Seibel, Steven De Feyter, Wojciech Pisula, Klaus Müllen e Akimitsu Narita. "Synthesis and helical supramolecular organization of discotic liquid crystalline dibenzo[hi,st]ovalene". Journal of Materials Chemistry C 7, n.º 41 (2019): 12898–906. http://dx.doi.org/10.1039/c9tc03350e.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Baviloliaei, Mahdi Sadeghzadeh, e Lars Diekhöner. "Molecular self-assembly at nanometer scale modulated surfaces: trimesic acid on Ag(111), Cu(111) and Ag/Cu(111)". Phys. Chem. Chem. Phys. 16, n.º 23 (2014): 11265–69. http://dx.doi.org/10.1039/c4cp01429d.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

Osada, M., e T. Sasaki. "Room-Temperature Ceramic Nanocoating Using Nanosheet Deposition Technique". Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2013, CICMT (1 de setembro de 2013): 000014–18. http://dx.doi.org/10.4071/cicmt-ta14.

Texto completo da fonte

Resumo:

We present a novel procedure for ceramic nanocoating using oxide nanosheet as a building block. A variety of oxide nanosheets (such as Ti1−δO2, MnO2 and perovsites) were synthesized by delaminating appropriate layered precursors into their molecular single sheets. These nanosheets are exceptionally rich in both structural diversity and electronic properties, with potential applications including conductors, semiconductors, insulators, and ferromagnets. Another attractive aspect is that nanosheets can be organized into various nanoarchitectures by applying solution-based synthetic techniques involving electrostatic layer-by-layer assembly and Langmuir-Blodgett deposition. It is even possible to tailor superlattice assemblies, incorporating into the nanosheet galleries with a wide range of materials such as organic molecules, polymers, and inorganic/metal nanoparticles. Sophisticated functionalities or paper-like devices can be designed through the selection of nanosheets and combining materials, and precise control over their arrangement at the molecular scale.

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

Tan, Jianbo, Yuhao Bai, Xuechao Zhang e Li Zhang. "Room temperature synthesis of poly(poly(ethylene glycol) methyl ether methacrylate)-based diblock copolymer nano-objects via Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA)". Polymer Chemistry 7, n.º 13 (2016): 2372–80. http://dx.doi.org/10.1039/c6py00022c.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Zhou, Xiang, Dongbao Yao, Wenqiang Hua, Ningdong Huang, Xiaowei Chen, Liangbin Li, Miao He et al. "Programming colloidal bonding using DNA strand-displacement circuitry". Proceedings of the National Academy of Sciences 117, n.º 11 (4 de março de 2020): 5617–23. http://dx.doi.org/10.1073/pnas.1917941117.

Texto completo da fonte

Resumo:

As a strategy for regulating entropy, thermal annealing is a commonly adopted approach for controlling dynamic pathways in colloid assembly. By coupling DNA strand-displacement circuits with DNA-functionalized colloid assembly, we developed an enthalpy-mediated strategy for achieving the same goal while working at a constant temperature. Using this tractable approach allows colloidal bonding to be programmed for synchronization with colloid assembly, thereby realizing the optimal programmability of DNA-functionalized colloids. We applied this strategy to conditionally activate colloid assembly and dynamically switch colloid identities by reconfiguring DNA molecular architectures, thereby achieving orderly structural transformations; leveraging the advantage of room-temperature assembly, we used this method to prepare a lattice of temperature-sensitive proteins and gold nanoparticles. This approach bridges two subfields: dynamic DNA nanotechnology and DNA-functionalized colloid programming.

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Teng, Yue, Le Xin Song, Wei Liu, Juan Xia, Li Zhao, Qing Shan Wang e Mao Mao Ruan. "Creation of hollow microtubular iron oxalate dihydrate induced by a metallo-supramolecular micelle based on the self-assembly of potassium ferrioxalate and sodium dodecyl sulphate". RSC Advances 5, n.º 48 (2015): 38006–10. http://dx.doi.org/10.1039/c5ra01703c.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

De Marchi, F., G. Galeotti, M. Simenas, E. E. Tornau, A. Pezzella, J. MacLeod, M. Ebrahimi e F. Rosei. "Room-temperature surface-assisted reactivity of a melanin precursor: silver metal–organic coordination versus covalent dimerization on gold". Nanoscale 10, n.º 35 (2018): 16721–29. http://dx.doi.org/10.1039/c8nr04002h.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

Talley, Michael R., Ryjul W. Stokes, Whitney K. Walker e David J. Michaelis. "Electrophilic activation of alkynes for enyne cycloisomerization reactions with in situ generated early/late heterobimetallic Pt–Ti catalysts". Dalton Transactions 45, n.º 24 (2016): 9770–73. http://dx.doi.org/10.1039/c6dt01783e.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Wang, Xiqian, Chenxi Liu, Yuying Jiang, Chiming Wang, Tianyu Wang, Ming Bai e Jianzhuang Jiang. "Room temperature chiral reorganization of interfacial assembly of achiral double-decker phthalocyanine". Physical Chemistry Chemical Physics 20, n.º 10 (2018): 7223–29. http://dx.doi.org/10.1039/c7cp08647d.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

Phuong, Luong Thi Kim, e An Manh Nguyen. "Epitaxial Growth of High Curie-Temperature Ge1-xMnx quantum dots on Si(001) by auto-assembly". Communications in Physics 24, n.º 1 (23 de março de 2014): 69. http://dx.doi.org/10.15625/0868-3166/24/1/3477.

Texto completo da fonte

Resumo:

We report on successful growth of epitaxial and high Curie-temperature Ge1-xMnx quantum dots on Si (001) substrates using the auto-assembled approach. By reducing the growth temperature down to 400 °C, we show that the Mn diffusion into the Si substrate can be neglected. No indication of secondary phases or clusters was observed. Ge1-xMnx quantum dots were found to be epitaxial and perfectly coherent to the Si substrate. We also observe ferromagnetic ordering in quantum dots at a temperature higher 320 K. It is believed that single-crystalline quantum dots exhibiting a high Curie temperature are potential candidates for spin injection at temperatures higher than room temperature.

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Wang, Kai, Dong Zhi Zhang, Jun Tong e Bo Kai Xia. "Ethanol Gas Sensor Based on Self-Assembled Multi-Walled Carbon Nanotube Film". Applied Mechanics and Materials 241-244 (dezembro de 2012): 881–84. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.881.

Texto completo da fonte

Resumo:

A multi-walled carbon nanotube (MWNT) film-based sensor was fabricated using layer-by-layer self-assembly method, and its ethanol gas-sensing properties with varying gas concentration are characterized at room temperature. The experiment results shown that the layer-by-layer self-assembled MWNT film sensor exhibit a fast response and linear resistance change when exposed to ethanol gas, indicated a prospective application for ethanol gas detection with high performance and low-cost.

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

Fan, Junpeng, Miguel Guerrero, Adrián Carretero-Genevrier, Maria Dolors Baró, Santiago Suriñach, Eva Pellicer e Jordi Sort. "Evaporation-induced self-assembly synthesis of Ni-doped mesoporous SnO2 thin films with tunable room temperature magnetic properties". Journal of Materials Chemistry C 5, n.º 22 (2017): 5517–27. http://dx.doi.org/10.1039/c7tc01128h.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Luo, Yanqing, Tao Tan, Sen Wang, Ran Pang, Lihong Jiang, Da Li, Jing Feng, Hongjie Zhang, Su Zhang e Chengyu Li. "Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature". Nanoscale 13, n.º 9 (2021): 4899–910. http://dx.doi.org/10.1039/d0nr08697e.

Texto completo da fonte

Resumo:

A self-assembly method is proposed for cubic phase CsPbX₃ nanocrystals under ambient conditions. Long-term stability and high quantum efficiency are maintained via ligand evolution from paired X type ligands to hybrid L–X type ligands.

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Cai, Zhen-Feng, Wei-Long Dong, Ting Chen, Hui-Juan Yan, Dong Wang, Wei Xu e Li-Jun Wan. "Directed assembly of fullerene on modified Au(111) electrodes". Chemical Communications 54, n.º 58 (2018): 8052–55. http://dx.doi.org/10.1039/c8cc04284e.

Texto completo da fonte

Resumo:

Here we show a conceptual approach to realize the scanning tunneling microscopy based induced-assembly of fullerene (C₆₀) molecules on top of a buffer organic adlayer at room temperature in a solution environment.

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Kojtari, Arben, Patrick J. Carroll e Hai-Feng Ji. "Metal organic framework (MOF) micro/nanopillars". CrystEngComm 16, n.º 14 (2014): 2885–88. http://dx.doi.org/10.1039/c4ce00172a.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!