Artigos de revistas sobre o tema "Resine transfer moulding"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Resine transfer moulding".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Robertson, Frank C. "Resin transfer moulding of aerospace resins—a review". British Polymer Journal 20, n.º 5 (1988): 417–29. http://dx.doi.org/10.1002/pi.4980200506.
Johnson, M. S., C. D. Rudd e D. J. Hill. "Microwave assisted resin transfer moulding". Composites Part A: Applied Science and Manufacturing 29, n.º 1-2 (janeiro de 1998): 71–86. http://dx.doi.org/10.1016/s1359-835x(97)00043-2.
Szabo, J. S., G. Romhany, T. Czigany e J. Karger-Kocsis. "Interpenetrating Vinylester/Epoxy Resins Reinforced by Flax Fibre Mat". Advanced Composites Letters 12, n.º 3 (maio de 2003): 096369350301200. http://dx.doi.org/10.1177/096369350301200304.
Bodaghi, Masoud, Pavel Simacek, Suresh G. Advani e Nuno C. Correia. "A model for fibre washout during high injection pressure resin transfer moulding". Journal of Reinforced Plastics and Composites 37, n.º 13 (29 de março de 2018): 865–76. http://dx.doi.org/10.1177/0731684418765968.
Johnson, M. S., C. D. Rudd e D. J. Hill. "Cycle Time Reductions in Resin Transfer Moulding Using Microwave Preheating". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 209, n.º 6 (dezembro de 1995): 443–53. http://dx.doi.org/10.1243/pime_proc_1995_209_108_02.
Pantelelis, Nikos G. "Optimised cure cycles for resin transfer moulding". Composites Science and Technology 63, n.º 2 (fevereiro de 2003): 249–64. http://dx.doi.org/10.1016/s0266-3538(02)00196-3.
Kendall, K. N., C. D. Rudd, M. J. Owen e V. Middleton. "Characterization of the resin transfer moulding process". Composites Manufacturing 3, n.º 4 (janeiro de 1992): 235–49. http://dx.doi.org/10.1016/0956-7143(92)90111-7.
Ruiz, Edu, Francois Trochu e Raymond Gauvin. "Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM". Advanced Composites Letters 13, n.º 1 (janeiro de 2004): 096369350401300. http://dx.doi.org/10.1177/096369350401300105.
Chai, Boon Xian, Jinze Wang, Thanh Kim Mai Dang, Mostafa Nikzad, Boris Eisenbart e Bronwyn Fox. "Comprehensive Composite Mould Filling Pattern Dataset for Process Modelling and Prediction". Journal of Composites Science 8, n.º 4 (18 de abril de 2024): 153. http://dx.doi.org/10.3390/jcs8040153.
Pickard, Laura Rhian, Joel Crinson, Nicolas Darras, Giuliano Allegri e Michael R. Wisnom. "Evaluation of manufacturing methods for pultruded rod-based hierarchical composite structural members with minimal porosity". Plastics, Rubber and Composites: Macromolecular Engineering 53, n.º 1 (fevereiro de 2024): 25–35. http://dx.doi.org/10.1177/14658011231212627.
Wöckel, Lydia, Thomas Ebert, Bernd Mainzer, Martin Frieß, Dietmar Koch, Kristina Roder, Daniel Wett, Daisy Nestler, Guntram Wagner e Stefan Spange. "Investigation of Different Phenolic Resins and their Behavior during Pyrolysis to Form SiC/C-Composites". Materials Science Forum 825-826 (julho de 2015): 240–48. http://dx.doi.org/10.4028/www.scientific.net/msf.825-826.240.
Schuster, J., Q. Govignon e S. Bickerton. "Processability of Biobased Thermoset Resins and Flax Fibres Reinforcements Using Vacuum Assisted Resin Transfer Moulding". Open Journal of Composite Materials 04, n.º 01 (2014): 1–11. http://dx.doi.org/10.4236/ojcm.2014.41001.
Ferreira Luz, F., Sandro Campos Amico, A. de Lima Cunha, E. Santos Barbosa e Antônio Gilson Barbosa de Lima. "Applying Computational Analysis in Studies of Resin Transfer Moulding". Defect and Diffusion Forum 326-328 (abril de 2012): 158–63. http://dx.doi.org/10.4028/www.scientific.net/ddf.326-328.158.
Lundström, T. Staffan. "Measurement of void collapse during resin transfer moulding". Composites Part A: Applied Science and Manufacturing 28, n.º 3 (janeiro de 1997): 201–14. http://dx.doi.org/10.1016/s1359-835x(96)00109-1.
Antonelli, D., e A. Farina. "Resin transfer moulding: mathematical modelling and numerical simulations". Composites Part A: Applied Science and Manufacturing 30, n.º 12 (dezembro de 1999): 1367–85. http://dx.doi.org/10.1016/s1359-835x(99)00044-5.
Zingraff, L., V. Michaud, P. E. Bourban e J. A. E. Månson. "Resin transfer moulding of anionically polymerised polyamide 12". Composites Part A: Applied Science and Manufacturing 36, n.º 12 (dezembro de 2005): 1675–86. http://dx.doi.org/10.1016/j.compositesa.2005.03.023.
Van Melick, H. G. H., G. A. A. V. Haagh, F. N. Van De Vosse e T. Peijs. "Simulation of Mould Filling in Resin Transfer Moulding". Advanced Composites Letters 7, n.º 1 (janeiro de 1998): 096369359800700. http://dx.doi.org/10.1177/096369359800700102.
Abdullah, Iram. "Manufacturing of Kevlar/Polyester Composite by Resin Transfer Moulding using Conventional and Microwave Heating". Pakistan Journal of Scientific & Industrial Research Series A: Physical Sciences 58, n.º 1 (27 de abril de 2015): 34–40. http://dx.doi.org/10.52763/pjsir.phys.sci.58.1.2015.34.40.
Mal, O., A. Couniot e F. Dupret. "Non-isothermal simulation of the resin transfer moulding press". Composites Part A: Applied Science and Manufacturing 29, n.º 1-2 (janeiro de 1998): 189–98. http://dx.doi.org/10.1016/s1359-835x(97)00065-1.
Verheus, A. S., e J. H. A. Peeters. "The role of reinforcement permeability in resin transfer moulding". Composites Manufacturing 4, n.º 1 (janeiro de 1993): 33–38. http://dx.doi.org/10.1016/0956-7143(93)90014-y.
Dippenaar, Dawid Jacobus, e Kristiaan Schreve. "3D printed tooling for vacuum-assisted resin transfer moulding". International Journal of Advanced Manufacturing Technology 64, n.º 5-8 (15 de março de 2012): 755–67. http://dx.doi.org/10.1007/s00170-012-4034-2.
Hayward, J. S., e B. Harris. "The effect of vacuum assistance in resin transfer moulding". Composites Manufacturing 1, n.º 3 (setembro de 1990): 161–66. http://dx.doi.org/10.1016/0956-7143(90)90163-q.
Owen, M. J., V. Middleton e C. D. Rudd. "Fibre reinforcement for high volume resin transfer moulding (rtm)". Composites Manufacturing 1, n.º 2 (junho de 1990): 74–78. http://dx.doi.org/10.1016/0956-7143(90)90239-s.
Kang, Moon Koo, Jae Joon Jung e Woo Il Lee. "Analysis of resin transfer moulding process with controlled multiple gates resin injection". Composites Part A: Applied Science and Manufacturing 31, n.º 5 (maio de 2000): 407–22. http://dx.doi.org/10.1016/s1359-835x(99)00086-x.
Matveev, MY, FG Ball, IA Jones, AC Long, PJ Schubel e MV Tretyakov. "Uncertainty in geometry of fibre preforms manufactured with Automated Dry Fibre Placement and its effects on permeability". Journal of Composite Materials 52, n.º 16 (23 de novembro de 2017): 2255–69. http://dx.doi.org/10.1177/0021998317741951.
Henne, Markus, Paolo Ermanni, Mylène Deléglise e Patricia Krawczak. "Heat transfer of fibre beds in resin transfer moulding: an experimental approach". Composites Science and Technology 64, n.º 9 (julho de 2004): 1191–202. http://dx.doi.org/10.1016/j.compscitech.2003.09.021.
Levy, Arthur, e James Kratz. "Direct numerical simulation of infusion and flow-front tracking in materials with heterogeneous permeability using a pressure mapping sensor". Journal of Composite Materials 54, n.º 13 (1 de novembro de 2019): 1647–61. http://dx.doi.org/10.1177/0021998319883931.
Turner, M. R., C. D. Rudd, A. C. Long, V. Middleton e P. McGeehin. "Net-Shape Preform Manufacture using Automated Fibre Placement". Advanced Composites Letters 4, n.º 4 (julho de 1995): 096369359500400. http://dx.doi.org/10.1177/096369359500400404.
Song, Y. S., K. Chung, T. J. Kang e J. R. Youn. "Numerical Prediction of Permeability Tensor for Three Dimensional Circular Braided Preform by considering Intra-tow Flow". Polymers and Polymer Composites 13, n.º 4 (maio de 2005): 323–34. http://dx.doi.org/10.1177/096739110501300401.
Mendikute, J., J. Plazaola, M. Baskaran, E. Zugasti, L. Aretxabaleta e J. Aurrekoetxea. "Impregnation quality diagnosis in Resin Transfer Moulding by machine learning". Composites Part B: Engineering 221 (setembro de 2021): 108973. http://dx.doi.org/10.1016/j.compositesb.2021.108973.
Liu, Zhuang, e Xiao Qing Wu. "Permeability Prediction in the Impregnation Stage of Resin Transfer Moulding". Advanced Materials Research 160-162 (novembro de 2010): 1211–16. http://dx.doi.org/10.4028/www.scientific.net/amr.160-162.1211.
Skordos, Alexandros A., Panagiotis I. Karkanas e Ivana K. Partridge. "A dielectric sensor for measuring flow in resin transfer moulding". Measurement Science and Technology 11, n.º 1 (20 de dezembro de 1999): 25–31. http://dx.doi.org/10.1088/0957-0233/11/1/304.
Fontana, Q. P. V. "Viscosity: thermal history treatment in resin transfer moulding process modelling". Composites Part A: Applied Science and Manufacturing 29, n.º 1-2 (janeiro de 1998): 153–58. http://dx.doi.org/10.1016/s1359-835x(97)00048-1.
Al-Hamdan, A., M. Tufail, C. D. Rudd e A. C. Long. "Skin Thickness Variation during Resin Transfer moulding of Sandwich Structures". Advanced Composites Letters 4, n.º 5 (setembro de 1995): 096369359500400. http://dx.doi.org/10.1177/096369359500400504.
Kiuna, N., C. J. Lawrence, Q. P. V. Fontana, P. D. Lee, T. Selerland e P. D. M. Spelt. "A model for resin viscosity during cure in the resin transfer moulding process". Composites Part A: Applied Science and Manufacturing 33, n.º 11 (novembro de 2002): 1497–503. http://dx.doi.org/10.1016/s1359-835x(02)00177-x.
Keller, A., C. Dransfeld e K. Masania. "Flow and heat transfer during compression resin transfer moulding of highly reactive epoxies". Composites Part B: Engineering 153 (novembro de 2018): 167–75. http://dx.doi.org/10.1016/j.compositesb.2018.07.041.
Wright, Nicholas, Piaras Kelly, Oliver Maclaren, Ruanui Nicholson e Suresh Advani. "Bayesian Optimal Experimental Design for Race Tracking in Resin Transfer Moulding". Applied Sciences 13, n.º 20 (23 de outubro de 2023): 11606. http://dx.doi.org/10.3390/app132011606.
Gauvin, R., e M. Chibani. "The Modelling of Mold Filling in Resin Transfer Molding". International Polymer Processing 1, n.º 1 (1 de março de 1986): 42–46. http://dx.doi.org/10.1515/217.860042.
Pico, Diego, Samir Machado, Juan Meza e Jimy Unfried-Silgado. "RESIN FLOW ANALYSIS DURING FABRICATION OF COCONUT MESOCARP FIBER-REINFORCED COMPOSITES USING VARTM PROCESS". International Journal of Modern Manufacturing Technologies 15, n.º 1 (20 de junho de 2023): 51–59. http://dx.doi.org/10.54684/ijmmt.2023.15.1.51.
Saad, Aouatif, Adil Echchelh, Mohammed Hattabi e Ganaoui El. "An improved computational method for non isothermal resin transfer moulding simulation". Thermal Science 15, suppl. 2 (2011): 275–89. http://dx.doi.org/10.2298/tsci100928016s.
Bickerton, S., e P. A. Kelly. "Application of a Complete Tooling Force Analysis for Simulation of Liquid Composite Moulding Processes". Key Engineering Materials 334-335 (março de 2007): 17–20. http://dx.doi.org/10.4028/www.scientific.net/kem.334-335.17.
Long, A. C., C. D. Rudd, M. Blagdon, K. N. Kendall e M. Y. Demeri. "Simulation and Measurement of Reinforcement Deformation during Preform Manufacture". Engineering Plastics 4, n.º 5 (janeiro de 1996): 147823919600400. http://dx.doi.org/10.1177/147823919600400506.
Long, A. C., C. D. Rudd, M. Blagdon, K. N. Kendall e M. Y. Demeri. "Simulation and Measurement of Reinforcement Deformation during Preform Manufacture". Polymers and Polymer Composites 4, n.º 5 (julho de 1996): 335–41. http://dx.doi.org/10.1177/096739119600400506.
Rutt, Mathew, C. Lekakou, P. A. Smith, A. Sordon, C. Santoni, G. Meeks e I. Hamerton. "Methods for process-related resin selection and optimisation in high-pressure resin transfer moulding". Materials Science and Technology 35, n.º 3 (31 de dezembro de 2018): 327–35. http://dx.doi.org/10.1080/02670836.2018.1557916.
Karkanas, Panagiotis I., Ivana K. Partridge e David Attwood. "Modelling the Cure of a Commercial Epoxy Resin for Applications in Resin Transfer Moulding". Polymer International 41, n.º 2 (outubro de 1996): 183–91. http://dx.doi.org/10.1002/(sici)1097-0126(199610)41:2<183::aid-pi621>3.0.co;2-f.
Szebényi, Gábor, e Gábor Romhány. "The Effect of Electron Irradiation on the Mechanical Properties of MWCNT/Carbon Fiber Reinforced Hybrid Nanocomposites". Materials Science Forum 659 (setembro de 2010): 91–95. http://dx.doi.org/10.4028/www.scientific.net/msf.659.91.
MAFFEZZOLI, A. M., J. M. KENNY e L. NICOLAIS. "Mathematical modelling of the resin transfer moulding of polyester based composites". Polimery 35, n.º 01/02 (janeiro de 1990): 5–9. http://dx.doi.org/10.14314/polimery.1990.005.
Al-Hamdan, A., M. Al-Ajloni, M. Alhusein, C. D. Rudd e A. C. Long. "Behaviour of core materials during resin transfer moulding of sandwich structures". Materials Science and Technology 16, n.º 7-8 (julho de 2000): 929–34. http://dx.doi.org/10.1179/026708300101508711.
Lam, Y. C., Sunil C. Joshi e X. L. Liu. "Numerical simulation of the mould-filling process in resin-transfer moulding". Composites Science and Technology 60, n.º 6 (maio de 2000): 845–55. http://dx.doi.org/10.1016/s0266-3538(99)00192-x.
Béchet, E., E. Ruiz e F. Trochu. "Adaptive mesh generation for mould filling problems in resin transfer moulding". Composites Part A: Applied Science and Manufacturing 34, n.º 9 (setembro de 2003): 813–34. http://dx.doi.org/10.1016/s1359-835x(03)00199-4.