Literatura científica selecionada sobre o tema "Resine transfer moulding"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Resine transfer moulding".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Resine transfer moulding":
Robertson, Frank C. "Resin transfer moulding of aerospace resins—a review". British Polymer Journal 20, n.º 5 (1988): 417–29. http://dx.doi.org/10.1002/pi.4980200506.
Johnson, M. S., C. D. Rudd e D. J. Hill. "Microwave assisted resin transfer moulding". Composites Part A: Applied Science and Manufacturing 29, n.º 1-2 (janeiro de 1998): 71–86. http://dx.doi.org/10.1016/s1359-835x(97)00043-2.
Szabo, J. S., G. Romhany, T. Czigany e J. Karger-Kocsis. "Interpenetrating Vinylester/Epoxy Resins Reinforced by Flax Fibre Mat". Advanced Composites Letters 12, n.º 3 (maio de 2003): 096369350301200. http://dx.doi.org/10.1177/096369350301200304.
Bodaghi, Masoud, Pavel Simacek, Suresh G. Advani e Nuno C. Correia. "A model for fibre washout during high injection pressure resin transfer moulding". Journal of Reinforced Plastics and Composites 37, n.º 13 (29 de março de 2018): 865–76. http://dx.doi.org/10.1177/0731684418765968.
Johnson, M. S., C. D. Rudd e D. J. Hill. "Cycle Time Reductions in Resin Transfer Moulding Using Microwave Preheating". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 209, n.º 6 (dezembro de 1995): 443–53. http://dx.doi.org/10.1243/pime_proc_1995_209_108_02.
Pantelelis, Nikos G. "Optimised cure cycles for resin transfer moulding". Composites Science and Technology 63, n.º 2 (fevereiro de 2003): 249–64. http://dx.doi.org/10.1016/s0266-3538(02)00196-3.
Kendall, K. N., C. D. Rudd, M. J. Owen e V. Middleton. "Characterization of the resin transfer moulding process". Composites Manufacturing 3, n.º 4 (janeiro de 1992): 235–49. http://dx.doi.org/10.1016/0956-7143(92)90111-7.
Ruiz, Edu, Francois Trochu e Raymond Gauvin. "Internal Stresses and Warpage of Thin Composite Parts Manufactured by RTM". Advanced Composites Letters 13, n.º 1 (janeiro de 2004): 096369350401300. http://dx.doi.org/10.1177/096369350401300105.
Chai, Boon Xian, Jinze Wang, Thanh Kim Mai Dang, Mostafa Nikzad, Boris Eisenbart e Bronwyn Fox. "Comprehensive Composite Mould Filling Pattern Dataset for Process Modelling and Prediction". Journal of Composites Science 8, n.º 4 (18 de abril de 2024): 153. http://dx.doi.org/10.3390/jcs8040153.
Pickard, Laura Rhian, Joel Crinson, Nicolas Darras, Giuliano Allegri e Michael R. Wisnom. "Evaluation of manufacturing methods for pultruded rod-based hierarchical composite structural members with minimal porosity". Plastics, Rubber and Composites: Macromolecular Engineering 53, n.º 1 (fevereiro de 2024): 25–35. http://dx.doi.org/10.1177/14658011231212627.
Teses / dissertações sobre o assunto "Resine transfer moulding":
Lowe, Julian Robert. "Void formation in resin transfer moulding". Thesis, University of Nottingham, 1993. http://eprints.nottingham.ac.uk/11626/.
Al-Hamdan, Ali. "Resin transfer moulding of sandwich structures". Thesis, University of Nottingham, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.362997.
Weitzenböck, Jan Rüdiger. "Flow characterization in resin transfer moulding". Thesis, University of Southampton, 1996. https://eprints.soton.ac.uk/403475/.
Hill, David John. "Microwave preheating of thermosetting resin for resin transfer moulding". Thesis, University of Nottingham, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.300723.
Skordos, Alexandros A. "Modelling and monitoring of resin transfer moulding". Thesis, Cranfield University, 2000. http://dspace.lib.cranfield.ac.uk/handle/1826/3861.
Abraham, David. "Resin transfer moulding component design and manufacture". Thesis, University of Ulster, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.243618.
Kiuna, Ngugi. "Investigation of flow perameters in resin transfer moulding". Thesis, Imperial College London, 2003. http://hdl.handle.net/10044/1/7298.
Blanchard, Patrick James. "High speed resin transfer moulding of composite structures". Thesis, University of Nottingham, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.325309.
Semling, M. "Minimisation of filling time in resin transfer moulding". Thesis, University of Warwick, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343145.
Parvathaneni, Keerthi Krishna. "Characterization and multiscale modeling of textile reinforced composite materials considering manufacturing defects". Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Lille Douai, 2020. http://www.theses.fr/2020MTLD0016.
The influence of void-type manufacturing defects on the mechanical properties of textile composites was investigated both by experimental characterization and by multiscale modeling. In particular, voids characteristics such as not only void volume fraction but also its size, shape, and distribution have been characterized for textile composites and their effect on the mechanical properties have been analyzed. Several textile composite plates were fabricated by the resin transfer molding (RTM) process where 3D interlock glass textile reinforcement was impregnated by epoxy resin under a constant injection pressure to generate different types of voids. A series of mechanical tests were performed to examine the dependency of tensile modulus and strength of composites on the total void volume fraction, intra & inter-yarn void volume fraction, and their geometrical characteristics. Microscopy observations were performed to obtain the local information about fibers (diameter and distribution), and intra-yarn voids (radius, aspect ratio and distribution). Based on these results, a novel algorithm was proposed to generate the statistically equivalent representative volume element (RVE) containing voids. Moreover, the effect of void morphology, diameter and spatial distribution (homogeneous, random and clustering) on the homogenized properties of the yarns was also investigated by the finite element method. X-ray micro-computed tomography was employed to extract the real meso-scale geometry and inter-yarn voids. Subsequently, this data was utilized to create a numerical model at meso-scale RVE and used to predict the elastic properties of composites containing voids. A parametric study using a multiscale numerical method was proposed to investigate the effect of each void characteristic, i.e. volume fraction, size, shape, distribution, and location on the elastic properties of composites. Thus, the proposed multiscale method allows establishing a correlation between the void defects at different scales and the mechanical properties of textile composites
Livros sobre o assunto "Resine transfer moulding":
Potter, Kevin. Resin Transfer Moulding. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9.
Potter, Kevin. Resin transfer moulding. London: Chapman & Hall, 1997.
Potter, Kevin. Resin Transfer Moulding. Dordrecht: Springer Netherlands, 1997.
Potter, Kevin. Resin transfer moulding. London: Chapman & Hall, 1997.
Kruckenberg, Teresa M., e Rowan Paton, eds. Resin Transfer Moulding for Aerospace Structures. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-4437-7.
M, Kruckenberg Teresa, e Paton Rowan, eds. Resin transfer moulding for aerospace structures. Dordrecht: Kluwer Academic, 1998.
Kruckenberg, Teresa M. Resin Transfer Moulding for Aerospace Structures. Dordrecht: Springer Netherlands, 1998.
David, Abraham. Resin transfer moulding component design and manufacture. [s.l: The Author], 1997.
D, Rudd C., ed. Liquid moulding technologies: Resin transfer moulding, structural reaction injection moulding, and related processing techniques. Warrendale, Pa: Society of Automotive Engineers, 1997.
Semling, Marcus. Minimisation of filling time in resin transfer moulding. [s.l.]: typescript, 1999.
Capítulos de livros sobre o assunto "Resine transfer moulding":
Potter, Kevin. "RTM theory". In Resin Transfer Moulding, 1–27. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_1.
Potter, Kevin. "Troubleshooting RTM processing problems". In Resin Transfer Moulding, 188–99. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_10.
Potter, Kevin. "Suggestions for good practice in the design and development of RTM components". In Resin Transfer Moulding, 200–203. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_11.
Potter, Kevin. "Costing". In Resin Transfer Moulding, 204–10. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_12.
Potter, Kevin. "Quality control/assurance". In Resin Transfer Moulding, 211–30. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_13.
Potter, Kevin. "Case study". In Resin Transfer Moulding, 231–38. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_14.
Potter, Kevin. "Materials for RTM". In Resin Transfer Moulding, 28–51. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_2.
Potter, Kevin. "Reinforcement manipulation and preforming". In Resin Transfer Moulding, 52–73. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_3.
Potter, Kevin. "RTM mould tool design". In Resin Transfer Moulding, 74–145. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_4.
Potter, Kevin. "Production engineering requirements". In Resin Transfer Moulding, 146–51. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-0021-9_5.
Trabalhos de conferências sobre o assunto "Resine transfer moulding":
Desplentere, Frederik, Ignaas Verpoest, Stepan Lomov e Martin Zatloukal. "Stochastic Flow Modeling for Resin Transfer Moulding". In NOVEL TRENDS IN RHEOLOGY III: Proceedings of the International Conference. AIP, 2009. http://dx.doi.org/10.1063/1.3203279.
Summerscales, J., C. Hoppins, P. Anstice, N. Brooks, J. Wiggers, D. Yahathugoda, A. Harper, C. Wood e M. Cooper. "In-Mould Gel Coating for Resin Transfer Moulding". In Marine & Offshore Composites. RINA, 2010. http://dx.doi.org/10.3940/rina.moc10cd.2010.08.
Bruno Moura Miranda, Wanderley Ferreira de Amorim, Francisco Procópio Batista Neto e Diego Davi da Silva Diniz. "Design and Fabrication of a Laboratorial Resin Transfer Moulding Equipment". In 23rd ABCM International Congress of Mechanical Engineering. Rio de Janeiro, Brazil: ABCM Brazilian Society of Mechanical Sciences and Engineering, 2015. http://dx.doi.org/10.20906/cps/cob-2015-1188.
Triollet, S., L. Robert, E. Marin e Y. Ouerdane. "Monitoring of vacuum assisted resin transfer moulding (VARTM) process with superimposed Fiber-Bragg-gratings". In 21st International Conference on Optical Fibre Sensors (OFS21). SPIE, 2011. http://dx.doi.org/10.1117/12.884855.
Aduriz, Xavier-Alexandre, Cyril Lupi, Jean-Luc Bailleul, Vincent Sobotka, Dominique Leduc, Nicolas Boyard, Nicolas Lefevre et al. "Fibre optics sensors applied to resin transfer moulding (RTM) in aeronautic: composite materials process optimization". In Photonics Europe, editado por Brian Culshaw, Anna G. Mignani, Hartmut Bartelt e Leszek R. Jaroszewicz. SPIE, 2006. http://dx.doi.org/10.1117/12.662607.
Martins, Filipe P., Laura Santos, Ricardo Torcato, Paulo S. Lima e José M. Oliveira. "Reproducibility Study of the Thermoplastic-Resin Transfer Moulding Process for Glass Fiber Reinforced Polyamide 6 Composites". In MATERIAIS. Basel Switzerland: MDPI, 2022. http://dx.doi.org/10.3390/materproc2022008084.
Shahnazari, M. R., e A. Abbassi. "Transient Numerical Simulation of Non-Isothermal Process of RTM". In ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45699.
Kyriazi, Evrydiki, Georgios Petsinis, Harry Zervos, Giannis Poulopoulos, Georgios Syriopoulos, Geoffrey Neale, Mehdi Asareh, Alexandros Skordos e Hercules Avramopoulos. "Photonic sensor-based machine learning for precise forecasting of cure time and temperature overshoot in resin transfer moulding". In Photonic Instrumentation Engineering XI, editado por Yakov Soskind e Lynda E. Busse. SPIE, 2024. http://dx.doi.org/10.1117/12.3001532.
Hafiezal, M. R. M., Khalina Abdan, M. D. Azaman, Abidin Z. Z. e Z. M. Hanafee. "Initial study of new bio-based epoxy in carbon fiber reinforced composite panel manufactured by vacuum assisted resin transfer moulding". In 3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017). Author(s), 2017. http://dx.doi.org/10.1063/1.5002260.
MUNIRAJ, D., S. MUGHILARASAN e V. M. SREEHARI. "EXPERIMENTAL INVESTIGATION OF HIGH VELOCITY IMPACT ON CNT REINFORCED COMPOSITES EMPLOYING SINGLE STAGE GAS GUN". In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35801.