Conecte-se

Bibliografias temáticas / Reinforcing bars Fatigue

Índice

Artigos de revistas
Teses / dissertações
Capítulos de livros
Trabalhos de conferências

Literatura científica selecionada sobre o tema "Reinforcing bars Fatigue"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 21 de fevereiro de 2023

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Reinforcing bars Fatigue".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Reinforcing bars Fatigue"

1

Kopas, Peter, Lenka Jakubovičová, Milan Vaško e Marián Handrik. "Fatigue Resistance of Reinforcing Steel Bars". Procedia Engineering 136 (2016): 193–97. http://dx.doi.org/10.1016/j.proeng.2016.01.196.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Wang, Wei, Jie Chen, Bo Diao, Xuefei Guan, Jingjing He e Min Huang. "Bayesian Fatigue Life Prediction of Corroded Steel Reinforcing Bars". Advances in Civil Engineering 2021 (28 de dezembro de 2021): 1–15. http://dx.doi.org/10.1155/2021/4632152.

Texto completo da fonte

Resumo:

This paper presents a general method for fatigue life prediction of corroded steel reinforcing bars. A fatigue testing on standard specimens with pitting corrosion is carried out to obtain corrosion fatigue data. The maximum corrosion degree (MCD), characterizing the most severe site of the corrosion pit, is identified to have a log-linear relationship with the fatigue life. A fatigue life model incorporating the MCD and the stress range for corroded steel reinforcing bars is proposed. The model parameters are identified using the testing data, and the model is considered as the baseline model. To utilize the proposed model for life prediction of corroded steel reinforcing bars with different geometries and working conditions, the Bayesian method is employed to update the baseline model. The effectiveness of the overall method is demonstrated using independent datasets of realistic steel reinforcing bars.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Hyland, C. W. K., e A. Ouwejan. "Fatigue of reinforcing bars during hydro-demolition". Journal of Physics: Conference Series 843 (maio de 2017): 012033. http://dx.doi.org/10.1088/1742-6596/843/1/012033.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Li, Shibin, Hongwei Tang, Qiang Gui e Zhongguo John Ma. "Fatigue behavior of naturally corroded plain reinforcing bars". Construction and Building Materials 152 (outubro de 2017): 933–42. http://dx.doi.org/10.1016/j.conbuildmat.2017.06.173.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Schwarzkopf, Michael. "Fatigue Design of Tack-Welded Mesh Reinforcing Bars". Structural Engineering International 5, n.º 2 (maio de 1995): 102–6. http://dx.doi.org/10.2749/101686695780601240.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Real, Enrique, Cristina Rodríguez, A. Fernández Canteli e F. Javier Belzunce. "Influence of the Shot Peening Process on the Fatigue Behaviour of Duplex Stainless Steel Reinforcing Bars". Materials Science Forum 539-543 (março de 2007): 4981–86. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.4981.

Texto completo da fonte

Resumo:

The influence of shot peening on the fatigue properties of duplex stainless steel reinforcing bars manufactured using both hot and cold rolled processes was studied. From determination of the S-N curves, the experimental results show that shot peening improves the fatigue behaviour of the re-bars, but that the improvement is much greater for the hot rolled bars. A more severe peening action capable of promoting greater plastic deformation of the bar surface needs to be used to improve the fatigue resistance of cold rolled corrugated bars.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Koulouris, Konstantinos F., e Charis Apostolopoulos. "Fatigue damage indicator of different types of reinforcing bars". International Journal of Structural Integrity 13, n.º 4 (28 de março de 2022): 632–48. http://dx.doi.org/10.1108/ijsi-10-2019-0103.

Texto completo da fonte

Resumo:

PurposeAs it is widely known, corrosion constitutes a major deterioration factor for reinforced concrete (RC) structures which are located on coastal areas. This phenomenon combined with repeated loads, as earthquake events, negatively affects their service life. Moreover, microstructure of steel reinforcing bars has significant impact either on their corrosion resistance or on their fatigue life.Design/methodology/approachIn the present manuscript an effort has been made to investigate the effect of corrosive factor on fatigue response for two types of steel reinforcement; Tempcore steel reinforcing bars and a new generation dual phase (DP) steel reinforcement.FindingsThe findings of this experimental study showed that DP steel reinforcement led to better results regarding its capacity to bear repeated loads to satisfactory degree after corrosion, although this type of steel has less stringent mechanical properties.Originality/valueAdditionally, a fatigue damage material indicator is proposed as a parameter that could rank material quality and its suitability for a certain application. The results of this investigation showed that the fatigue damage indicator can be used as an appropriate index in order to evaluate the overall performance of materials, in terms of strength and ductility capacity.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Li, Shibin. "Fatigue of Reinforcing Steel Bars Subjected to Natural Corrosion". Open Civil Engineering Journal 5, n.º 1 (29 de abril de 2011): 69–74. http://dx.doi.org/10.2174/1874149501105010069.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Zhuang, Chenxu, Jinquan Zhang e Ruinian Jiang. "Fatigue Flexural Performance of Short-Span Reinforced Concrete T-Beams Considering Overloading Effect". Baltic Journal of Road and Bridge Engineering 15, n.º 2 (25 de junho de 2020): 89–110. http://dx.doi.org/10.7250/bjrbe.2020-15.474.

Texto completo da fonte

Resumo:

Traffic volume increase and higher proportion of heavier trucks have raised the potential risk of fatigue failure of short-span reinforced concrete beams. To investigate the fatigue behavior of short-span reinforced concrete beams with and without the overload effect, nine 5 m reinforced concrete T-beams were cast and tested. Two beams were tested under static loading to determine the ultimate strength; the remaining seven beams were subjected to cyclic loading with constant-amplitude load ranges. In addition, two of the seven beams were subjected to instant overloading. It was observed that the typical failure mode under cyclic loading was the fatigue fracture of tensile reinforcing bars. The introduction of instant overloading resulted in a remarkable reduction of fatigue life. Among all the parameters, the stress range of the reinforcing bars showed the highest effect on the fatigue life. In the end, the fatigue safety provisions in the current reinforced concrete beam design codes were evaluated based on the fatigue limits and S-N curves.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Islam, M. A. "Essential Mechanical Properties of Structural Steels for Steel Reinforced Buildings in the Earthquake Sensitive Areas". Journal of Scientific Research 4, n.º 1 (23 de dezembro de 2011): 51. http://dx.doi.org/10.3329/jsr.v4i1.7069.

Texto completo da fonte

Resumo:

During earthquake, the ground along with its various natural and manmade structures experiences shaking of various intensities and frequencies depending on the nature of the earthquake. The loading activities caused by earthquakes on various structures are very much cyclic type, which is popularly known as fatigue loading. On the other hand, for modern high-rise buildings a large volume of steel bar is used to reinforce the concrete because of the pioneer role of steel bars embedded inside the concrete for safety of the buildings. In this study various mechanical properties of reinforcing steel bars that are essential to counter balance the earthquake effects have been identified first. At the same time these essential mechanical properties have been defined and studied for most commonly used reinforcing steel bars. For doing this, both the conventional and advanced structural steels were selected. The mechanical properties and fatigue behaviours of these steels have been presented and discussed in this paper. Keywords: Earthquake; High-rise buildings; Reinforcing steel bars; Conventional structural steel; Advanced structural steel.© 2012 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved.doi: http://dx.doi.org/10.3329/jsr.v4i1.7069 J. Sci. Res. 4 (1), 51-63 (2012)

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Reinforcing bars Fatigue"

1

Zheng, Hang. "Tempcore reinforcing steel : microstructure and mechanical properties". Phd thesis, Department of Civil Engineering, 1998. http://hdl.handle.net/2123/8671.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Gravina, Rebecca Jane. "Non-linear overload behaviour and ductility of reinforced concrete flexural members containing 500MPa grade steel reinforcement". Title page, contents and abstract only, 2002. http://web4.library.adelaide.edu.au/theses/09PH/09phg777.pdf.

Texto completo da fonte

Resumo:

Includes corrigenda (inserted at front) and list of publications published as a result of this research. Includes bibliographical references (leaves 192-199) Investigates the overload behaviour and modes of collapse of reinforced concrete flexural members containing 500MPa grade reinforcing steel and evaluates the adequacy of current ductility requirements for design according to AS 3600 to ensure strength and safety.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Gravina, Rebecca Jane. "Non-linear overload behaviour and ductility of reinforced concrete flexural members containing 500MPa grade steel reinforcement / by Rebecca Jane Gravina". Thesis, 2002. http://hdl.handle.net/2440/21791.

Texto completo da fonte

Resumo:

Includes corrigenda (inserted after title page) and list of publications published as a result of this research.
Includes bibliographical references (leaves 192-199)
xxvii, 223 leaves : ill. ; 30 cm.
Investigates the overload behaviour and modes of collapse of reinforced concrete flexural members containing 500MPa grade reinforcing steel and evaluates the adequacy of current ductility requirements for design according to AS 3600 to ensure strength and safety.
Thesis (Ph.D.)--University of Adelaide, Dept. of Civil and Environmental Engineering, 2002

Estilos ABNT, Harvard, Vancouver, APA, etc.

Capítulos de livros sobre o assunto "Reinforcing bars Fatigue"

1

Abatta-Jácome, Lenin, Carlos Naranjo-Guatemala, Daniel Naranjo-Torres e Edison E. Haro. "Experimental Study of Low Cycle Fatigue in Welded Reinforcing Steel Bars ASTM A706". In Communications in Computer and Information Science, 3–15. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-24971-6_1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Real, Enrique, Cristina Rodríguez, A. F. Canteli e F. J. Belzunce. "Influence of the Shot Peening Process on the Fatigue Behaviour of Duplex Stainless Steel Reinforcing Bars". In THERMEC 2006, 4981–86. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.4981.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

"Low cycle fatigue properties of anti-seismic steel HRB400E reinforcing steel bars". In Green Building, Materials and Civil Engineering, 337–40. CRC Press, 2014. http://dx.doi.org/10.1201/b17568-67.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Ishikawa, Y., M. Aoyama, Y. Adachi e M. Nagai. "Damage assessment of reinforced concrete decks due to chloride-induced corrosion of reinforcing bars and fatigue". In Bridge Maintenance, Safety, Management, Resilience and Sustainability, 1659–66. CRC Press, 2012. http://dx.doi.org/10.1201/b12352-241.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

M. Kashani, Mohammad, Adam J. Crewe e Nicholas A. Alexander. "Damage propagation in corroded reinforcing bars with the effect of inelastic buckling under low-cycle fatigue loading". In Life-Cycle of Engineering Systems, 1996–2002. CRC Press, 2016. http://dx.doi.org/10.1201/9781315375175-262.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Reinforcing bars Fatigue"

1

Braconi, A., F. Braga, S. Caprili, R. Gigliotti e W. Salvatore. "INFLUENCE OF LOW-CYCLE FATIGUE AND CORROSION PHENOMENA ON THE DUCTILE BEHAVIOUR OF STEEL REINFORCING BARS". In 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Athens: Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA) Greece, 2014. http://dx.doi.org/10.7712/120113.4787.c1537.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Lunabba, Torsten, Milla Ranta, Kimmo Julku, Heikki Lilja e Timo Tirkkonen. "Evaluating the Residual Lifetime of Road Bridges Through Simulation". In IABSE Conference, Copenhagen 2018: Engineering the Past, to Meet the Needs of the Future. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2018. http://dx.doi.org/10.2749/copenhagen.2018.008.

Texto completo da fonte

Resumo:

<p>In 2015-2016 Destia Ltd conducted a study to examine the stress variations caused by actual traffic on two-lane road bridges. Actual traffic was studied using a purposely developed simulation software. Destia Ltd collected data of the traffic flow from automatic monitoring stations. An article based on the research was presented at the 19th IABSE Congress Stockholm, 21-23 September 2016 [1].<p> This study expands the previous analysis to include the determination of equivalent stresses that are used to estimate the fatigue damage of structural steel and reinforcing steel bars caused by actual traffic flow and to evaluate the remaining lifetime of the three existing bridges. Two of the bridges were composite bridges and one a reinforced concrete bridge. In addition to the simulated traffic the bridges were also loaded with eurocode’s static load model LM1 and fatigue load models FLM1 and FLM3. At the end, the results were compared to the simulated results.<p> This article focuses on the results of one of the examined bridges, Liisanniemi bridge, which is a composite bridge with 58m + 78m + 58 m spans and 8,5m width. The main results of fatigue analysis of reinforcing steel bars are also shortly presented at the end of the article.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Jansto, Steven G. "New Generation Structural Steel Plate Metallurgy for Meeting Offshore and Arctic Application Challenges". In ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/omae2018-77723.

Texto completo da fonte

Resumo:

The new generation of value-added low carbon-low manganese-niobium microalloyed structural steels for both low and high yield strength, energy absorption, fatigue and fracture resistant applications is under development for offshore and arctic materials engineering applications. These materials engineering considerations are shifting designers to consider new lower cost and more robust construction materials even for low yield strength applications require improved fatigue, fracture arrest and toughness performance. The civil engineering and end user community demand structural reinforcing bars, shapes, beams and plates with improved energy absorption and fatigue properties. With more severe climatic conditions evolving every day, demands also necessitate improved fire and seismic resistance, yield-to-tensile ratio consistency, improved bendability and weldability. These attributes are difficult to obtain from steel producers today with their current higher carbon microalloyed steel approaches and hot rolling practices. There is a global shift in motion to low C-Nb-Mn bearing construction steels displacing traditional materials. The technological and metallurgical advancements of value-added niobium (Nb) microalloyed thermo-mechanical controlled process (TMCP) plate steels have been further developed to meet more demanding fatigue, fracture and low temperature toughness end user requirements. Niobium enables achievement of substantial grain refinement and grain size uniformity when the plate is rolled with the proper reduction, thermal schedule and process metallurgical operational practices. The effects of microalloying elements on the continuous cooling transformation behavior must be carefully controlled during the process metallurgy of the reheating and rolling process to successfully achieve the desired mechanical properties. TMCP applications have been successfully developed in numerous product sectors with thickness exceeding 120 mm. Since the very fine grained microstructure improves toughness and increases the yield strength, this Nb-TMCP process enables the required tensile properties with the growing trend to leaner chemical composition designs (less than 0.10%C) and excellent toughness properties. From an operational cost perspective, in today’s very competitive market environment, there exists a huge opportunity for structural offshore and arctic plate producing steel mills to improve their profitability by thoroughly assessing a shift to lower carbon and manganese steels in their product mix. Through the adoption of these lower carbon Nb-containing structural materials, several design and/or manufacturing companies are initiating new offshore steel designs that will further provide improved overall lifetime and cost performance at reduced maintenance expense. These high strength plate steels offer the opportunity to manufacture complex heavy-lift and fatigue-critical components for larger offshore structures without increasing the weight of the platforms.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Yoneda, Taiju, Jie Fang, Hideyuki Otani, Satoshi Tsuchiya, Satoru Oishi e Tetsuya Ishida. "Development of a 3D Finite-Element Modelling Generation System Based on Data Processing Platform and Fatigue Analysis of Full-Scale Reinforced-Concrete Bridge". In IABSE Symposium, Prague 2022: Challenges for Existing and Oncoming Structures. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2022. http://dx.doi.org/10.2749/prague.2022.0415.

Texto completo da fonte

Resumo:

<p>This study presents a technology development for creating 3D finite-element full-scale bridge models based on a data processing platform (DPP) and explores the trial fatigue analysis to serve as an important reference for future practical applications. Until now, the model generation, validation and calculation for a large-scale model of conventional method consume huge time and money. Currently, developments in High- Performance Computing (HPC) and preparation for large parallel computers make numerical simulation operation more efficient. Moreover, through the grouping structure technique, different types of data can be linked together. In this research, a 3D finite-element full-scale bridge superstructure model was created using the DPP. A trial fatigue analysis was performed using a high-performance computer. By considering the details such as the position of each reinforcing bar, prestressed tendon, the slope, etc., the DPP model more closely captures the real structure. Therefore, it could be said that the model made by the DPP has higher analytical accuracy. This research paved the way for the implementation of large-scale fatigue analysis, which has significant engineering applications prospects.</p>

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Chen, Jie, e Yongming Liu. "Bayesian Information Fusion of Multmodality Nondestructive Measurements for Probabilistic Mechanical Property Estimation". In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-23411.

Texto completo da fonte

Resumo:

Abstract Missing data occur when no data value is available for the variable in an observation. In this research, Bayesian data augmentation method is adopted and implemented for prediction with missing data. The data augmentation process is conducted through Bayesian inference with missing data assuming the multivariate normal distribution. Gibbs sampling is used to draw posterior simulations of the joint distribution of unknown parameters and unobserved quantities. The missing elements of the data are sampled conditional on the observed elements. The distribution of model parameters and variables with missing data can be obtained for reliability analysis. Two examples are given to illustrate the engineering application of Bayesian inference with missing data. The first example is to predict the yield strength of aging pipeline by fusing the incomplete surface information with missing data. The predictive performance is compared among direct surface indentation technique, linear regression with complete data and Bayesian inference with missing data. The second example is to predict the fatigue life of corroded steel reinforcing bar from the incomplete input dataset. The predicted fatigue lives are compared with experimental data. Both examples demonstrate that the Bayesian method can deal with missing data problem properly and show good predictive performance.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!