Literatura científica selecionada sobre o tema "Réduction active de vibration"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Réduction active de vibration".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Réduction active de vibration"
Elliott, Stephen J., Philip A. Nelson e Ian M. Stothers. "Active vibration control". Journal of the Acoustical Society of America 94, n.º 2 (agosto de 1993): 1177. http://dx.doi.org/10.1121/1.406937.
Texto completo da fonteHarper, Mark F. L. "Active vibration control". Journal of the Acoustical Society of America 94, n.º 6 (dezembro de 1993): 3533. http://dx.doi.org/10.1121/1.407156.
Texto completo da fonteSchilling, Hermann. "Active vibration damper". Journal of the Acoustical Society of America 99, n.º 2 (1996): 644. http://dx.doi.org/10.1121/1.414582.
Texto completo da fonteBaker, E. Bruce. "Active vibration suppressor". Journal of the Acoustical Society of America 82, n.º 5 (novembro de 1987): 1857. http://dx.doi.org/10.1121/1.395785.
Texto completo da fonteIchikawa, Hiroyuki, e Takehiko Fushimi. "Active vibration insulator". Journal of the Acoustical Society of America 122, n.º 6 (2007): 3148. http://dx.doi.org/10.1121/1.2822942.
Texto completo da fontePinson, George T. "Active vibration isolator". Journal of the Acoustical Society of America 80, n.º 4 (outubro de 1986): 1280. http://dx.doi.org/10.1121/1.394450.
Texto completo da fonteYasuda, Takayoshi. "Active vibration insulator". Journal of the Acoustical Society of America 126, n.º 2 (2009): 933. http://dx.doi.org/10.1121/1.3204347.
Texto completo da fonteYang, Dong-Ho, Moon-K. Kwak, Jung-Hoon Kim, Woon-Hwan Park e Sang-Hoon Oh. "Active Vibration Control Experiment on Automobile Using Active Vibration Absorber". Transactions of the Korean Society for Noise and Vibration Engineering 21, n.º 8 (20 de agosto de 2011): 741–51. http://dx.doi.org/10.5050/ksnve.2011.21.8.741.
Texto completo da fonteR RASID, Syed Mamun, Takeshi MIZUNO, Masaya TAKASAKI, Yuji ISHINO, Masayuki HARA e Daisuke YAMAGUCHI. "Active Vibration Isolation System with an Active Dynamic Vibration Absorber". Proceedings of the Dynamics & Design Conference 2016 (2016): 422. http://dx.doi.org/10.1299/jsmedmc.2016.422.
Texto completo da fonteKarnopp, D. "Active and Semi-Active Vibration Isolation". Journal of Mechanical Design 117, B (1 de junho de 1995): 177–85. http://dx.doi.org/10.1115/1.2836452.
Texto completo da fonteTeses / dissertações sobre o assunto "Réduction active de vibration"
Farah, Philippe-Siad. "Étude de la réduction des vibrations des machines synchrones". Grenoble INPG, 1995. http://www.theses.fr/1995INPG0087.
Texto completo da fonteCassoret, Bertrand. "Réduction active du bruit magnétique des machines asynchrones directement connectées au réseau". Phd thesis, Université d'Artois, 1996. http://tel.archives-ouvertes.fr/tel-00372876.
Texto completo da fonteLe premier chapitre expose le phénomène, fait une synthèse des relations mécaniques et acoustiques existantes et les confronte avec des expériences pratiques.
Une méthode de calcul des harmoniques d'induction présents dans l'entrefer est développée dans le deuxième chapitre, ils sont responsables des forces de Maxwell à l'origine du bruit. Les relations obtenues sont valables pour un moteur à rotor bobiné ou à cage et permettent la détermination des harmoniques de courant rotorique et statorique. Elles sont comparées à celles données par d'autres auteurs qui négligent certains termes.
Les applications numériques présentées dans le troisième chapitre soulignent l'importance d'un phénomène qualifié de résonance de denture, responsable de courants rotoriques harmoniques importants et de bruit magnétique. Elles montrent également la validité de la théorie en comparant les résultats aux relevés pratiques.
Le dernier chapitre expose le principe de réduction active du bruit magnétique. Il consiste à injecter un faible courant harmonique créant une force qui s'oppose à celle à l'origine du bruit. Plusieurs montages sont proposés, permettant l'injection d'un courant supplémentaire dans une machine alimentée par le réseau. L'étude expérimentale permet de valider le procédé.
Romary, Raphaël. "Modélisation de la machine synchrone à concentration de flux : application à la réduction active des vibrations". Lille 1, 1995. http://www.theses.fr/1995LIL10031.
Texto completo da fonteGeoffriault, Maud. "Réduction active des vibrations et des bruits d'une machine électrique par la stratégie de commande". Thesis, CentraleSupélec, 2015. http://www.theses.fr/2015SUPL0003/document.
Texto completo da fonteThis work takes place in the context of the development of powertrains for electric vehicles. Those developments have raised new issues such as noise and vibrations of electrical machines, which are important issues in automotive applications. The aim of this thesis is to develop control laws dedicated to the reduction of currents harmonics that are responsible for vibration harmonics.In that purpose, different parts of the system have been modelled. Parameters of the electrical model of the studied machine have then been identified thanks to experimental measurements.Two different control laws are proposed and developed. One the one hand, a controller is synthetized thanks to H-infinity optimization. On the other hand, the studied current harmonic is modelled as coming from an external disturbance. This virtual disturbance is estimated thanks to an observer and compensated
Wang, Peng. "Active vibration control in a specific zone of smart structures". Thesis, Lyon, 2019. http://www.theses.fr/2019LYSEC007/document.
Texto completo da fonteThis research aims at solving a particular vibration control problem of smart structures. We aim at reducing the vibration in a specific zone of the smart structure under the disturbance that covers a wide frequency band. Moreover, at this specific zone, neither actuation nor sensing is possible.Here we face several main challenges. First, we need to control the vibration of a specific zone of the structure while we only have access to measurements at other zones. Second, the wide bandwidth of the disturbance implies that numerous modes should be controlled at the same time which requires the use of multiple actuators and sensors. This leads to a MIMO controller which is difficult to obtain using classical controller design methods. Third, the so-called spillover problem must be avoided which is to guarantee the closed-loop stability when the model-based controller is applied on the actual setup. To tackle these challenges, we investigate two control strategies: the centralized control and the distributed control.For centralized control, we propose a methodology that allows us to obtain a simple MIMO controller that accomplishes these challenges. First, several modeling and identification techniques are applied to obtain an accurate low-order model of the smart structure. Then, an H_∞ control based synthesis method with a particularly proposed H_∞ criterion is applied. This H_∞ criterion integrates multiple control objectives, including the main challenges. In particular, the spillover problem is transformed into a robust stability problem and will be guaranteed using this criterion. The obtained H_∞ controller is a standard solution of the H_∞ problem. The final controller is obtained by further simplifying this H_∞ controller without losing the closed-loop stability and degrading the performance. This methodology is validated on a beam structure with piezoelectric transducers and the central zone is where the vibration should be reduced. The effectiveness of the obtained controller is validated by simulations and experiments.For distributed control, we consider the same beam structure and the same control objectives. There exist methods aiming at designing distributed controllers of spatially interconnected system. This research proposes a FEM based method, combined with several model reduction techniques, that allows to spatially discretize the beam structure and deduce the state-space models of interconnected subsystems. The design of distributed controllers will not be tackled in this research
Lecointe, Jean-Philippe. "Etude et réduction active du bruit d'origine magnétique des machines à réluctance variable à double saillance". Artois, 2003. http://www.theses.fr/2003ARTO0203.
Texto completo da fonteAn analytical model of doubly salient switched reluctance machine magnetic noise prediction and a new technique of active noise reduction are proposed. The studied machine is described as well as the analytical expressions permitting the determination of mechanical deformations and acoustic intensity. The main contribution of this research consists in determining analytical expressions of magnetic origin forces which create vibrations and noise. A 2kW 8/6 machine permits to validate several theoretical points such as mechanical resonance frequencies, phase inductances or vibratory and acoustical spectra. Existent noise reduction process are also described as well as influences of geometric parameters - such as teeth or yoke dimensions- on noise. At last, a new technique using current injection into auxiliary windings is performed and validated on an available prototype
Brakna, Mohammed. "Sensor and actuator optimal location for dynamic controller design. Application to active vibration reduction in a galvanizing process". Electronic Thesis or Diss., Université de Lorraine, 2023. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0152_BRAKNA.pdf.
Texto completo da fonteThe aims of the present PhD thesis are to determine a model that is both sufficiently accurate and numerically exploitable to propose optimal placement of sensors and actuators for active vibration control in a galvanizing line. A continuous hot-dip galvanizing process consists in covering a metal (here: a steel band) by a protective layer of zinc which avoids the corrosion due to the air. The thickness of this layer must be constant to guarantee the mechanical properties and surface condition of the product. In a galvanizing line, the moving steel strip is heated and then immersed in a liquid zinc bath before being wiped out by nozzles projecting air. The air flow, as well as the rotation of the driving rolls, among other things, creates vibrations affecting the wiping process and thus the regularity of the zinc deposit. Active control is therefore necessary, for example by means of electromagnets placed on either side of the moving steel strip. In a first step, a behavioral model of the steel strip taking into account the presence and propagation of vibrations was obtained by spatial discretization of a partial differential equation. This state space model was validated in simulation and experimentally on a pilot galvanizing line of ArcelorMittal Research in Maizières-lès-Metz. Once this model is established, the objective of the study is to find the optimal placement of sensors, to measure the vibrations of the strip as efficiently as possible, but also of actuators to minimize the amplitude of these vibrations by an appropriate control law. These problems of optimal placement are at the heart of the issues of active vibration control and are found in many fields of application. An optimal placement method based on Gramian maximization has been proposed in order to reduce the impact of disturbances on the system. Different control strategies have been considered such as (i) observed state feedback based on Kalman filter and LQ regulator; and (ii) extended observed state feedback to improve the results by also taking into account the disturbance estimation provided by a PI (proportional-integral) observer. Simulation and experimental results illustrate the thesis contributions
Karim, Yassine. "Caractérisation robuste de liaisons amortissantes avec dispositifs piezo-électriques pour la réduction de vibrations de structures". Phd thesis, Conservatoire national des arts et metiers - CNAM, 2013. http://tel.archives-ouvertes.fr/tel-00953330.
Texto completo da fonteLauzier, Kevin. "Analyse et réduction des vibrations d'un refroidisseur cryogénique pour application spatiale : de la modélisation multiphysique à la commande non linéaire". Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI071.
Texto completo da fonteEarth observation satellites for meteorological, scientific or military applications sometimes carry infrared imagers. These cameras need to be cooled down to very low temperatures in order to avoid blurry infrared pictures of the Earth, due to the thermal noise of the detector or heat sources nearby. This PhD thesis focuses on a pulse tube cryocooler used in such applications. It deals with induced vibrations as they can destabilize the satellite or make the camera focal plane move. The goals are to understand and reduce the vibrations induced by the pulse tube cryocooler. These PhD works are composed of two main parts. First, the cryocooler is analyzed and modelled to reproduce observed induced vibrations. This global multiphysics model is aimed at identifying dissymmetry, non-linearity and mechanical behaviors which cause vibrations. This approach uses different fields of science such as electromagnetism, mechanics, fluid mechanics and thermodynamics. Sensitivity studies are done and the model is confronted to experiments highlighting measurement tools limits and checking methodologies. Next, vibration reduction using control strategies is studied. The whole control loop is questioned. The improvements proposed concern the vibration sensors, the frequency analysis algorithm, the vibration reduction algorithm and the type of control. Solutions for control, conception and manufacturing resulting from this PhD work offer opportunities to improve the system and lower its cost
Kidner, Michael Roger Francis. "An active vibration neutraliser". Thesis, University of Southampton, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299609.
Texto completo da fonteLivros sobre o assunto "Réduction active de vibration"
Conference on Mechanical Vibration and Noise (11th 1987 Boston, Mass.). Vibration control and active vibration suppression. New York, N.Y. (345 E. 47th St., New York 10017): American Society of Mechanical Engineers, 1987.
Encontre o texto completo da fontePreumont, André. Vibration Control of Active Structures. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5654-7.
Texto completo da fonteBaz, Amr M. Active and Passive Vibration Damping. Chichester, UK: John Wiley & Sons, Ltd, 2019. http://dx.doi.org/10.1002/9781118537619.
Texto completo da fontePreumont, A. Vibration Control of Active Structures. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-2033-6.
Texto completo da fontePreumont, André. Vibration Control of Active Structures. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72296-2.
Texto completo da fonteLandau, Ioan Doré, Tudor-Bogdan Airimițoaie, Abraham Castellanos-Silva e Aurelian Constantinescu. Adaptive and Robust Active Vibration Control. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-41450-8.
Texto completo da fonteYu, Wen, e Satyam Paul. Active Control of Bidirectional Structural Vibration. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-46650-3.
Texto completo da fontePreumont, André, ed. Responsive Systems for Active Vibration Control. Dordrecht: Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0483-1.
Texto completo da fonteNATO, Advanced Study Institute on Responsive Systems for Active Vibration Control (2001 Brussels Belgium). Responsive systems for active vibration control. Dordrecht: Kluwer Academic Publishers, 2002.
Encontre o texto completo da fontePreumont, André. Responsive Systems for Active Vibration Control. Dordrecht: Springer Netherlands, 2002.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Réduction active de vibration"
Michael Sinapius, Johannes, Björn Timo Kletz e Steffen Opitz. "Active Vibration Control". In Adaptronics – Smart Structures and Materials, 227–329. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. http://dx.doi.org/10.1007/978-3-662-61399-3_6.
Texto completo da fonteFuller, C. R. "Active Vibration Control". In Encyclopedia of Acoustics, 893–907. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2007. http://dx.doi.org/10.1002/9780470172520.ch75.
Texto completo da fonteWang, Jiqiang. "Active Vibration Distribution". In Active Vibration & Noise Control: Design Towards Performance Limit, 221–61. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4116-0_6.
Texto completo da fontePreumont, A. "Vibration Isolation". In Vibration Control of Active Structures, 155–86. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-2033-6_8.
Texto completo da fontePreumont, André. "Vibration Isolation". In Vibration Control of Active Structures, 165–97. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72296-2_8.
Texto completo da fontePreumont, André. "Active Control of Large Telescopes: Active Optics". In Vibration Control of Active Structures, 449–68. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72296-2_17.
Texto completo da fonteAltay, Okyay. "Active and Semi-Active Damping Systems". In Vibration Mitigation Systems in Structural Engineering, 145–54. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781315122243-9.
Texto completo da fonteLandau, Ioan Doré, Tudor-Bogdan Airimitoaie, Abraham Castellanos-Silva e Aurelian Constantinescu. "Active Damping". In Adaptive and Robust Active Vibration Control, 187–210. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41450-8_10.
Texto completo da fontePreumont, A. "Semi-active Control". In Vibration Control of Active Structures, 403–16. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-2033-6_17.
Texto completo da fontePreumont, André. "Semi-active Control". In Vibration Control of Active Structures, 487–501. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72296-2_19.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Réduction active de vibration"
Corr, Lawrence R., e William W. Clark. "Comparison of Active and Hybrid Vibration Confinement With Conventional Active Vibration Control". In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/vib-8303.
Texto completo da fonteZaev, Emil, Gerhard Rath e Hubert Kargl. "Energy Efficient Active Vibration Damping". In 13th Scandinavian International Conference on Fluid Power, June 3-5, 2013, Linköping, Sweden. Linköping University Electronic Press, 2013. http://dx.doi.org/10.3384/ecp1392a35.
Texto completo da fontePavelka, Vaclav, Pavel Suranek e Radek Strambersky. "Thin Plate Active Vibration Control". In 2021 22nd International Carpathian Control Conference (ICCC). IEEE, 2021. http://dx.doi.org/10.1109/iccc51557.2021.9454648.
Texto completo da fonteLURIE, B., J. FANSON e R. LASKIN. "Active suspensions for vibration isolation". In 32nd Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1991. http://dx.doi.org/10.2514/6.1991-1232.
Texto completo da fonteAgnes, Gregory S. "Active/passive piezoelectric vibration suppression". In 1994 North American Conference on Smart Structures and Materials, editado por Conor D. Johnson. SPIE, 1994. http://dx.doi.org/10.1117/12.174112.
Texto completo da fonteHagedorn, P., J. Wallaschek e P. Chen. "Active Vibration Damping in Beams". In 1989 American Control Conference. IEEE, 1989. http://dx.doi.org/10.23919/acc.1989.4790189.
Texto completo da fonteYanlei, Gao, e Li Lin. "Active vibration control simulation of the vibration isolation platform". In 2009 IEEE International Conference on Control and Automation (ICCA). IEEE, 2009. http://dx.doi.org/10.1109/icca.2009.5410231.
Texto completo da fonteFerren, W. Brent, e Robert J. Bernhard. "Active Control of Simulated Road Noise". In Noise & Vibration Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/911046.
Texto completo da fonteChrysohoidis, Nikolaos, Grigoris Chatziathanasiou, Georgopoulos Kostas e Dimitrios A. Saravanos. "Active and Semi-Active Vibration Control on Aircraft Structures". In AIAA Scitech 2021 Forum. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2021. http://dx.doi.org/10.2514/6.2021-1736.
Texto completo da fonteTaraza, Dinu, e Horst Wölfel. "Torsional Vibration Control by Means of an Active Vibration Absorber". In International Off-Highway & Powerplant Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/952086.
Texto completo da fonteRelatórios de organizações sobre o assunto "Réduction active de vibration"
Farrar, C., W. Baker, J. Fales e D. Shevitz. Active vibration control of civil structures. Office of Scientific and Technical Information (OSTI), novembro de 1996. http://dx.doi.org/10.2172/400183.
Texto completo da fonteFrisch, Josef C. Inertial Sensor Development for Active Vibration. Office of Scientific and Technical Information (OSTI), maio de 2003. http://dx.doi.org/10.2172/813342.
Texto completo da fonteHallauer, William L., Kubis Jr. e Jr Anthony J. Experimental Study of Active Vibration Control. Fort Belvoir, VA: Defense Technical Information Center, julho de 1986. http://dx.doi.org/10.21236/ada173144.
Texto completo da fonteFuller, Chris R. A Distributed Active Vibration Absorber (DAVA) and Associated Control Approaches for Active-Passive Reduction of Sound and Vibration. Fort Belvoir, VA: Defense Technical Information Center, janeiro de 2001. http://dx.doi.org/10.21236/ada389507.
Texto completo da fonteLewis, P. S., e S. Ellis. Active noise and vibration control for vehicular applications. Office of Scientific and Technical Information (OSTI), dezembro de 1998. http://dx.doi.org/10.2172/562543.
Texto completo da fonteBodson, Marc. Adaptive Algorithms for Active Noise and Vibration Control. Fort Belvoir, VA: Defense Technical Information Center, julho de 2000. http://dx.doi.org/10.21236/ada390623.
Texto completo da fonteFrisch, Josef C. Active Vibration Suppression R and D for the NLC. Office of Scientific and Technical Information (OSTI), dezembro de 2001. http://dx.doi.org/10.2172/798941.
Texto completo da fonteEriksson, Leif S. ACTIVE VIBRATION SUPPRESSION R+D FOR THE NEXT LINEARCOLLIDER. Office of Scientific and Technical Information (OSTI), agosto de 2002. http://dx.doi.org/10.2172/800037.
Texto completo da fonteWang, Kon-Well. Active-Passive Hybrid Adaptive Structures for Vibration Controls -- An Integrated Approach. Fort Belvoir, VA: Defense Technical Information Center, abril de 2000. http://dx.doi.org/10.21236/ada384416.
Texto completo da fonteFriedmann, Peretz P. A Fundamental Study of Active Vibration Control in Rotorcraft Using the ACSR Approach. Fort Belvoir, VA: Defense Technical Information Center, dezembro de 1997. http://dx.doi.org/10.21236/ada358026.
Texto completo da fonte