Siga este link para ver outros tipos de publicações sobre o tema: Rattan industry.
Artigos de revistas sobre o tema "Rattan industry"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Rattan industry".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
1
Suroto, Suroto. "PEMANFAATAN ROTAN NON KOMERSIAL SEBAGAI BAHAN BAKU MEBEL DITINJAU DARI SIFAT FISIS DAN MEKANIS". Jurnal Riset Industri Hasil Hutan 3, n.º 1 (1 de junho de 2011): 1. http://dx.doi.org/10.24111/jrihh.v3i1.1181.
Texto completo da fonteResumo:
Rattan in good quality is curently difficult to obtain and it price is quite expensive. So, it is needed to utilize non commercial rattan as substitute material. By identification of basic characteristics , such as phisical, mechanical, chemical and anatomy structure, every species of non commercial rattan can be used appropriately. The objectives of this research is to optimize utilization non commercial rattan as subtitute material and develop rattan manufacturing industry especially by identivication of the physical and mechanical characteristics. Five (5) rattan species studied here are marau (Calamus mettanensis Becc), toho (Calamus spp), galang (Daemonorops verticilaris Griff Mart), hijau (Calamus spp. and simpurut (Calamus panajuga Becc) whic derived from central Kalimantan. The research result based on physical characteristic rang for diameter is between 6,2 – 27,2 mm, inter-segment length 10 – 28 cm, moisture content 12,50 – 16,48 % and density 1,03 – 1,61 gr/cm3. While mechanical characteristics range for modulus of elasticity is between 364,03 – 1934,29 kg/cm2, compression strenth 127,55 – 441,04 kg/cm2 and tensile strength 197,34 – 394,20 kg/cm2. Those rattan species can be optimized as craft industry raw material especialy for furniture and rattan matting.Keywords: rattans, physical, mechanical, craft.
2
Islamy, Vina Agustine, e Dewi Yuliati. "The Ups and Downs of Rattan Handicraft Industrial Centers in Tegalwangi Village 1973-2017". Paramita: Historical Studies Journal 31, n.º 1 (31 de março de 2021): 56–63. http://dx.doi.org/10.15294/paramita.v31i1.23327.
Texto completo da fonteResumo:
Abstract: This article discusses the ups and downs of the rattan handicraft industrial centers in Tegalwangi Village in 1973-2017. This study outlines matters related to the rattan handicraft industry and the influence of the existence of the rattan handicraft industry on the socio-economic life of the residents of Tegalwangi Village. The writing of this study used a historical method consisting of four methods; which is: heuristic (source collection), which consist of primary and secondary sources, critical source, interpretation source, and historiography. Rattan handicraft products in Tegalwangi Village are the excellent commodity of Cirebon Regency. The ups and downs of the rattan handicraft industry can be seen from the ups and downs of the number of business units and laborers. Rattan handicraft industry has existed in Tegalwangi Village since the 1930s, which was first established by one of its residents named Semaun. The new rattan handicraft industry began to develop in the 1970s, marked by the establishment of the Tegalwangi rattan handicraft coop in 1973, which also influenced the development of rattan handicraft industry centers in this village. Abstrak: Artikel ini mengkaji tentang pasang surut sentra industri kerajinanrotan di DesaTegalwangi tahun 1973-2017. Penelitian ini menguraikan hal-hal yang berkaitan dengan industri kerajinan rotan dan pengaruh keberadaan industri kerajinan rotan bagi kehidupan social ekonomi penduduk Desa Tegalwangi. Penelitian ini menggunakan metode sejarah kritis yang mencakup empat langkah, heuristik (pengumpulan sumber) yang terdiri dari sumber primer dan sekunder, kritik sumber, dan historiografi. Produk industri kerajinan rotan di Desa Tegalwangi merupakan komoditi unggulan Kabupaten Cirebon. Pasang surut industri kerajinan rotan dapat dilihat dari naik-turunnya jumlah unit usaha dan tenaga kerja. Industri kerajinan rotan sudah ada di Desa Tegalwangi sejak tahun 1930-an yang didirikan pertama kali oleh salah satu penduduknya yang bernama Semaun. Industri kerajinan rotan baru mulai berkembang sejak tahun 1970-an ditandai dengan berdirinya Koperasi kerajinan rotan Tegalwangi pada tahun 1973 yang turut mempengarui perkembangan sentra industri kerajinan rotan di desa ini.Â
3
Desiyanti, Rika. "ANALISIS SWOT DAN STRATEGI PENGEMBANGAN PADA KEBERHASILAN INDUSTRI KECIL ROTAN KOTA PADANG". Jurnal Apresiasi Ekonomi 4, n.º 1 (1 de janeiro de 2019): 1–14. http://dx.doi.org/10.31846/jae.v4i1.142.
Texto completo da fonteResumo:
Rattan commodity in Padang city, including commodity most likely to be developed. With its potential industrial development aimed at strengthening competitiveness through competitive advantages. The strategy used to develop the small industry rattan in Padang city in order to have a competitive edge is SWOT analysis and using the right strategy for businesses rattan industry. The object of research is small rattan Industry, located in Tanah Sirah Kelurahan Pitameh Kecamatan Lubuk Begalung Kota PadangTanah Sirah Kelurahan Pitameh Kecamatan Lubuk Begalung Kota Padang and institutions related. This study uses primary data, field observations, interviews and questionnaires, and secondary data obtained through agencies associated with the research. The analysis was performed by using a SWOT analysis. The result is obtained that rattan industry Padang from the internal side of strength greater than weakness, while on the external side of the existing opportunities greater than the treatness. Rattan industry Padang city were the first quadrant which means that this position indicates that the rattan industry in the city of Padang strong and likely to grow.
Keywords: SWOT Analysis, development of the rattan industry
4
Nangoy, Oktavianus Marti. "Terpuruknya Industri Mebel Rotan Cirebon". Humaniora 2, n.º 1 (30 de abril de 2011): 11. http://dx.doi.org/10.21512/humaniora.v2i1.2940.
Texto completo da fonteResumo:
Cirebon area has long been known as an area that has great potential in the field of furniture and handicraft industry with raw materials of rattan. This region really does not have trees but because of the large rattan hereditary craftsmen at work there, and many there menyebabkan Cirebon rattan industry as a major regional craftsmen and the largest cane producer in Indonesia. But that condition did not last long because it feared since the Minister of Trade Decree No.12 of 2005, contains the opening tap on raw rattan exports, leading, manufacturers prefer to export the raw materials of rattan. Prices of raw materials for furniture and rattan craft also be high because the prices charged for local producers to use the benchmark export price. This ministerial decree on the one side benefit exporters but the industry shut down one side.
5
Nugraheni, Fitria, MS Khabibur Rahman e Ary Wijayanti. "THE DISTRIBUTION OF THE RATTAN INDUSTRY TO THE INCOME OF RATTAN CRAFTSMEN IN THE TRANGSAN VILLAGE GATAK DISTRICT SUKOHARJO DISTRICT IN 2020". Journal of Geography Science and Education 3, n.º 1 (26 de maio de 2021): 21. http://dx.doi.org/10.32585/jgse.v3i1.1513.
Texto completo da fonteResumo:
This study aims to determine: 1) Distribution Map of the Rattan Industry in Trangsan Village, Gatak District, Sukoharjo Regency. (2) Region of Origin of Rattan Raw Materials in Trangsan Village, Gatak District, Sukoharjo Regency. (3) Socio-Economic Characteristics of Rattan Industry Craftsmen in Trangsan Village, Gatak District, Sukoharjo Regency. This research uses descriptive qualitative research methodology is a research procedure that produces descriptive data in the form of written or spoken words from people and observable behavior. This study describes the Distribution Map of the Rattan Industry in Trangsan Village, Gatak District, Sukoharjo Regency, the Area of Origin of Rattan Raw Materials in Trangsan Village, Gatak District, Sukoharjo Regency, and the socio-economic characteristics of rattan industry craftsmen in Trangsan Village, Gatak District, Sukoharjo Regency. The data collection technique used is through direct field observation, interviews, questionnaires and documentation Based on the research that has been done, the results of this study are: (1) The results of the distribution of the rattan industry are 101 industries. (2) Regions of origin of rattan raw materials from Sulawesi and Kalimantan. (3) The socio-economic characteristics of rattan craftsmen whose industrial owners are aged 15-64 are 22 people aged> 65, there are 2 people, the highest education level is Bachelor degree, the income level is around 3,000,000 to over 9,000,000. Meanwhile, there are 48 people in the workforce aged 15-64, the highest level of education is SMA, the level of income per week is around 300,000 to 900,000.
6
Anshory, Boike Janus, e Prihandoko Sanjatmiko. "Industrial Partnership and Local Wisdom in the Rattan Furniture Industry: An Anthropological Perspective in Maintaining Cultural Heritage and Innovation". Jurnal Syntax Transformation 4, n.º 12 (11 de dezembro de 2023): 194–205. http://dx.doi.org/10.46799/jst.v4i12.854.
Texto completo da fonteResumo:
This research aims to the partnership between the rattan furniture industry and local wisdom from an anthropological perspective has become an important part of the cultural heritage of certain communities, and illustrates the close relationship between humans and nature and traditions that continue to be preserved from generation to generation. With the development of technology and globalization, challenges arise in maintaining cultural authenticity while still innovating to meet changing market demands. The stage is to explore how a solid partnership between the rattan furniture industry and the local community can be the key to maintaining and appreciating local wisdom. Anthropology as a scientific approach will assist in understanding the important role of culture and traditional values in the production process and design of rattan furniture. This research is a relevant and meaningful forum for discussing how the rattan furniture industry can collaborate with anthropology-based local communities. By applying an anthropological perspective in an industrial context, a deeper understanding of the role of rattan furniture as part of cultural heritage and local identity will be obtained. Descriptions of creative and innovative ways to integrate traditional values and local wisdom in the rattan furniture production process will have an impact on sustainable and mutually beneficial partnerships between industry and local communities will be discussed to maintain and appreciate knowledge and skills that have been passed down from generation to generation. The role of the rattan furniture industry is expected to be able to adapt to the challenges of globalization, while still maintaining the authenticity of their products and supporting cultural sustainability in the context of implementing local values, the design and marketing of rattan furniture products in the global market will be an important focus point. By analyzing the impact of globalization and technology on the rattan furniture industry, it is hoped that it will encourage active participation and collaboration from industry players, academics and local communities in maintaining cultural wealth and creativity in the rattan furniture sector
7
Anshory, Boike Janus, e Prihandoko Sanjatmiko. "Industrial Partnership and Local Wisdom in the Rattan Furniture Industry: An Anthropological Perspective in Maintaining Cultural Heritage and Innovation". Syntax Idea 5, n.º 7 (25 de outubro de 2023): 979–93. http://dx.doi.org/10.46799/syntax-idea.v5i7.2637.
Texto completo da fonteResumo:
This research aims to the partnership between the rattan furniture industry and local wisdom from an anthropological perspective has become an important part of the cultural heritage of certain communities, and illustrates the close relationship between humans and nature and traditions that continue to be preserved from generation to generation. With the development of technology and globalization, challenges arise in maintaining cultural authenticity while still innovating to meet changing market demands. The stage is to explore how a solid partnership between the rattan furniture industry and the local community can be the key to maintaining and appreciating local wisdom. Anthropology as a scientific approach will assist in understanding the important role of culture and traditional values in rattan furniture's production process and design. This research is a relevant and meaningful forum for discussing how the rattan furniture industry can collaborate with anthropology-based local communities. By applying an anthropological perspective in an industrial context, a deeper understanding of the role of rattan furniture as part of cultural heritage and local identity will be obtained. Descriptions of creative and innovative ways to integrate traditional values and local wisdom in the rattan furniture production process will have an impact on sustainable and mutually beneficial partnerships between industry and local communities will be discussed to maintain and appreciate knowledge and skills that have been passed down from generation to generation. The role of the rattan furniture industry is expected to be able to adapt to the challenges of globalization, while still maintaining the authenticity of their products and supporting cultural sustainability in the context of implementing local values, the design and marketing of rattan furniture products in the global market will be an important focus point. By analyzing the impact of globalization and technology on the rattan furniture industry, it is hoped that it will encourage active participation and collaboration from industry players, academics and local communities in maintaining cultural wealth and creativity in the rattan furniture sector.
8
Pratama, Zulyo Kumara. "THE CONCEPT OF "THE SYNERGY OF INDONESIA RATTAN" AT THE INTERIOR DESIGN OF NATIONAL RATTAN INNOVATION CENTER (PIRNas) BY USING DESIGN THINKING METHOD". Ars: Jurnal Seni Rupa dan Desain 22, n.º 1 (27 de julho de 2019): 1–8. http://dx.doi.org/10.24821/ars.v22i1.2867.
Texto completo da fonteResumo:
As an effort to support the national rattan industry development through appropriate innovations, the government established the National Rattan Innovation Center (PIRNas) in Palu, Central Sulawesi in 2012. However as an important institution in the rattan development industry in Indonesia, there are a number of fundamental problems related to the interior design of the PIRNas that must be fixed. The PIRNas interior design uses design thinking methods (Bob Gill 2004). The interior design result of the PIRNas will focus on strengthening the concept and the story of "The Synergy of Indonesia Rattan" adapted from big attention and appreciation of the rattan travel values, mainly its history, process and national rattan potential. The designer applies rattan material with all room elements that complementary and continuous each other in applying the concept. The implementation is expected to present a strong image in representing the identity and role of the PIRNas as a national center for rattan research and its development.
9
Hamdi, Saibatul, e Arhamsyah Arhamsyah. "PENGGUNAAN BAHAN FINISHING PADA ROTAN NON KOMERSIAL SEBAGAI BAHAN KERAJINAN". Jurnal Riset Industri Hasil Hutan 3, n.º 2 (31 de dezembro de 2011): 7. http://dx.doi.org/10.24111/jrihh.v3i2.1189.
Texto completo da fonteResumo:
Development of the rattan furniture industry today is quite fast although the amount of raw materials are decreasing, especially in commersial rattan commodities such as Manau, Irit, Taman, Sega, etc. Their price is quite expensive too five species of rattan were used as research materials. There are Manau (Calamus mettanensis Becc), Toho (Calamus sp), Galang (Daemonorops verticilaris Griff Mart), Hijau (Calamus sp) and simpurut (Calamus panajuga Becc). For finishing materials, clear glass melamine (ML 131 and NC 141) were used in this research with three different immersion timer for 24 hours, 36 hours and 48 hours long. An immersion method without using any finishing materials was done as control materials. Result show that the average of volume expansion of rattan speseis using NC 141 are 1,56-3,16% in Marau; 1,36-2,91%; in Toho; 2,01-3,05% in Galang; 2,12-3,20% in Hijau and 1,90-2,14 in Simpurut. In the other hand, the average of volume expansion of rattan species using melamin ML 131 are 1,27-2,58% in Marau; 1,46-2,51% in Toho; 2,30-3,23% in galang; 1,10-2,79% in Hijau and 1,45-2,55% in Simpurut. In control materials the average of expantion volume in 5 species rattans is 2,53-3,99%. From those results, the best method was shown in using NC 141 which can prevent the volume expansion and give great influence in volume expansion value.Keywords: rattan, finishing material, melamine ML 131, melamine NC 141, volume expantion.
10
Latifah, S., Yonariza, Purwanto, A. Codilan, Darwo, O. H. Syahputra e A. N. A. Rambe. "Study of the types and feasibility of the rattan industry for the sustainability of non-timber forest products in North Sumatra". IOP Conference Series: Earth and Environmental Science 1315, n.º 1 (1 de março de 2024): 012069. http://dx.doi.org/10.1088/1755-1315/1315/1/012069.
Texto completo da fonteResumo:
Abstract Rattan has significant value in the craft creative industry because of the various benefits associated with its use as a raw material for various handicraft products. This research was conducted to determine the types and sources of raw materials, the types of processed products produced, and the types of processed products, and to determine the business feasibility and income of the rattan industry. The results showed that five types of rattan were used, namely Calamus manau, Calamus scipionum, Calamus caesius, Daemonorops angustifolia, and baliong rattan. The results of the study show that the average income in 2022 obtained by Small and Medium Enterprises (UKM) Mulia Rattan, Sibayak Rattan, Pancur Simalem Rattan, Sejahtera Rattan, and Rattan Aat respectively was 197,990,800, IDR; 13,510,789, IDR; 141,029,989 IDR; 134,029,989 IDR and 228,294,200 IDR. Based on the feasibility analysis, the Internal Rate of Return (IRR) of each UKM was 78%, 47%, 69%, 84%, and 95%, respectively. All IRR values are greater than interest rates, which means that UKM activities are feasible to carry out. BCR for each business is 1.23; 1.29; 1.64; 1.31. All Small and Medium Enterprises are said to be feasible because of BCR>1.
11
Malik, Kendall, Rahmad Washinton, Ranelis Ranelis e Rahma Melisha Fajrina. "PKM KERAJINAN ROTAN DALAM PENGEMBANGAN DESAIN PRODUK UNTUK MENCAPAI SELERA PASAR DI KOTA PADANG". SELAPARANG: Jurnal Pengabdian Masyarakat Berkemajuan 7, n.º 1 (11 de março de 2023): 491. http://dx.doi.org/10.31764/jpmb.v7i1.13798.
Texto completo da fonteResumo:
ABSTRAKPeningkatan industry rotan kian meroket seiring adanya pelarangan ekspor bahan mentah rotan oleh pemerintah. Kondisi ini tentunya dapat menjadi peluang bagi industry rotan khususnya UMKM atau Sentra rotan yang bergerak dalam usaha produk rotan. Salah satu sentra rotan yang dimiliki oleh Sumatera Barat adalah Sentra Rotan Anil Furniture di Padang merupakan UMKM Produk Rotan yang masih berdiri dan bertahan dalam berjualan produk rotan. Namun selama ini pelaku UMKM produk rotan di Anil Furniture mengalami penurunan dan jalan ditempat dalam penjualan produk rotan. Penurunan penjualan produk akibat produk yang dihasilkan selalu repetitive (pengulangan) akhirnya pasar produk rotan mengalami lesu dan tidak berkembang. Dalam PKM ini TIM IS Padangpanjang mencoba memberi pendampingan dengan metode sosialisai, ceramah dan aplikasi dalam mengembangkan desain produk rotan yang terdapat di Sentra Rotan ANIL Furniture. Sentra Rotan ANIL Furniture merupakan Mitra dalam PKM ini yang memiliki perajin sebanyak 5 (lima) orang termasuk pemilik (owner). Evaluasi yang TIM PKM ISI Padangpanjang lakukan adalah melihat kemampuan perajin dalam mendesain kemudian pemahaman dalam pengembangan produk rotan. Hasil yang dicapai dalam PKM ini adalah produk yang dirancang sesuai dari hasil riset selera pasar dan kemudian dijadikan ke dalam bentuk prototype (tiga dimensi). Kata kunci: rotan; selera pasar; desain; anil furnitur. ABSTRACTThe increase in the rattan industry has skyrocketed in line with the ban on exports of rattan raw materials by the government. This condition can certainly be an opportunity for the rattan industry, especially UMKM or rattan centers engaged in the rattan product business. One of the rattan centers owned by West Sumatra is the Anil Furniture Rattan Center in Padang, which is a Rattan Product UMKM that is still standing and surviving in selling rattan products. However, so far, UMKM in rattan products at Anil Furniture have experienced a decline and have been in place in the sale of rattan products. This has an impact on decreasing the motivation of craftsmen in making and selling rattan products. However, so far the UMKM players in rattan products at Anil Furniture have experienced a decline and have stalled in the sale of rattan products. The decline in product sales was due to the fact that the products produced were always repetitive (reproducing similar patterns or shapes) so that the market for rattan products experienced sluggishness and did not develop. In this PKM, the ISI Padang Panjang Team tries to provide assistance with socialization methods, lectures and applications in developing rattan product designs found at the ANIL Furniture Rattan Center. ANIL Furniture Rattan Center is a Partner in this PKM which has 5 (five) craftsmen including the owner. The evaluation that the PKM ISI Padang Panjang TEAM has to look at the craftsman's ability to design and then understand the development of rattan products. The results achieved in this PKM are products that are designed according to the results of research on market tastes and then made into a prototype (three dimensional). keywords: rattan; market tastes; design; anil furniture.
12
Bahri, Samsul, Teuku Makmur e Otto Nur Abdullah. "Strategi Pengembangan Usaha Industry Kerajinan Rotan (Studi Kasus) Di Desa Keude Being Kecamatan Lhoknga Kabupaten Aceh Besar". Jurnal Ilmiah Mahasiswa Pertanian 6, n.º 4 (1 de novembro de 2021): 329–42. http://dx.doi.org/10.17969/jimfp.v6i4.18300.
Texto completo da fonteResumo:
The rattan handicraft industry in Keude Bieng Village has produced various kinds of rattan handicraft products such as chairs, flower pots, trash cans, and serving hoods so that they can be comfortable and have their own charm compared to other rattan products. This study aims to determine what internal factors and external factors influence the strategy of developing rattan handicraft business in Keude Bieng Village, Lhoknga District, Aceh Besar District, and to determine the strategy of developing rattan handicraft business in Keude Bieng Village, Lhoknga District, Aceh Besar District. . The object of this research is focused on the strategy of developing the rattan handicraft industry in Keude Bieng Village and the scope of the research is limited to the strategy of developing the rattan handicraft industry in Keude Bieng Village, Lhoknga District, Aceh Besar District. The method used in this research is a case study. The results showed that the internal factors that could support the development of the rattan craft business in Keudee Bieng Village were the strength factor which included good product quality, while the weakness factor was the lack of promotion in product marketing that had not been implemented. Meanwhile, external factors that can support and hinder the growth and development of the rattan craft business in Keudee Bieng Village are opportunity factors which include potential locations that support the business and threat factors include the influence of competitors' entry. With this, external and internal factors have a significant effect on the strategy of developing rattan handicraft business in Keude Bieng Village, Lhoknga District, Aceh Besar District. The most appropriate is to use an aggressive strategy, namely a strategy that uses strength to take advantage of existing opportunities. Rattan craft business owners should carry out marketing management through digital marketing promotions and directly to all consumers, especially those in the Aceh area, so that it will expand consumer interest to buy and minimize the entry of competitors in the rattan craft business in Keudee Bieng, so that it will minimize the weaknesses that arise. exist in the industry, and can maintain existing strengths and opportunities.
13
Yolanda, Gita Melisa, Ridwan Manda Putra e Suwondo . "STRATEGI PENGELOLAAN INDUSTRI ROTAN BERKELANJUTAN DI KOTA PEKANBARU". JURNAL ILMU-ILMU KEHUTANAN 7, n.º 1 (28 de fevereiro de 2023): 23. http://dx.doi.org/10.31258/jiik.7.1.23-29.
Texto completo da fonteResumo:
This study aims to determine the status of the sustainable management of the rattan industry in Pekanbaru City and to design a sustainable management strategy for the rattan industry. The types of data in this study are primary data and secondary data. Interview and observation data collection methods. The data analysis method in this research is multidimensional scaling (MDS). Sustainability was analyzed using MDS analysis with the help of the Rap-Insus Industry software. The status of the sustainable management of the rattan industry in Pekanbaru City in a multidimensional manner is in a fairly continuous category. The results of the analysis of each dimension are the ecological dimension (32.5%) the economic dimension (75.6%) the social dimension (54.3%) the technology dimension (36.1) and the partnership dimension (66.5%). The strategy for sustainable rattan industry management in Pekanbaru City is carried out by establishing policies in the production process (product quality standardization), processing of waste from industrial activities, and rules and policies in the use of raw materials.
14
Latifah, Siti, Agus Purwoko e Sindy Hutapea. "Analysis of business feasibility and trade system for rattan crafts in Rumbai district, Pekanbaru City". Global Forest Journal 1, n.º 01 (29 de julho de 2023): 33–39. http://dx.doi.org/10.32734/gfj.v1i01.12971.
Texto completo da fonteResumo:
Rattan is one of the commodity timber forest products used as raw material for the rattan industry. One of the small businesses that is quite developed in Rumbai District, Pekanbaru City is the rattan handicraft business which is a traditional small industry and is a family business. This study aims to determine the business feasibility and trading system of the rattan handicraft trade. This research was conducted with a quantitative and qualitative descriptive approach. The method used for data collection is a field survey through observations, interviews, and questionnaires on rattan craftsmen and Trade Units (UD). UD Rattan Crafts in Rumbai can be said to be worthy of continuing. This is because the NPV value of the trading business in Rumbai is > 0, IRR > from interest rates, and BCR > 1. Analysis of the trading system shows that there are trading system functions that are used, namely the exchange function, physical function, and facility function.
15
Safri, Indra, e La Ode Syarfan. "Pengaruh Inovasi Produk Terhadap Kinerja Usaha Industri Kerajinan Rotan Kota Pekanbaru". JIP ( Jurnal Industri dan Perkotaan ) 19, n.º 1 (28 de fevereiro de 2023): 109. http://dx.doi.org/10.31258/jip.19.1.109-114.
Texto completo da fonteResumo:
This study aims to determine product innovation, business performance and the influence of product innovation on business performance in the rattan work industry in Rumbai District, Perkanbaru City. This research uses a type of quantitative descriptive research. This study uses a quantitative descriptive method. The data collection technique used was distributing questionnaires and conducting direct interviews with respondents. The population in this study were rattan craftsmen in Rumbai District with 36 people, while the sample was taken using a census. Data analysis was performed using simple linear regression statistical analysis. The results of research on the rattan work industry in Rumbai District, Pekanbaru City, show that product innovation is not good, business performance is not good. The product innovation variable (X) has a positive and significant effect on the business performance (Y) of the rattan handicraft industry in Rumbai District, Perkanbaru City.
16
Kurniawan, Bambang Kartono, Ira Samri, Gihon Nugrahadi e Dyah Ayu Sekarningrum. "Commercial Product Development and Its Sustainability Impact for Rattan Cluster in Desa Trangsan". E3S Web of Conferences 388 (2023): 01022. http://dx.doi.org/10.1051/e3sconf/202338801022.
Texto completo da fonteResumo:
Export-based rattan industry manufacturers hold significant roles in national income, especially those in Desa Trangsan, Sukoharjo. However, the rattan industry manufacturers still have limitations in product design development, affecting design innovation. Most rattan industries in Desa Trangsan produce their products to fit their global buyer demands, including design criteria and quality the buyers set. This research focuses on the furniture design analysis for the export market in Desa Trangsan, produced by small and medium rattan manufacturers. This research aims to identify the commercial product development process and the designer’s role in the innovation process. The research uses literature study and field observation methods with a descriptive qualitative approach. The study aims to identify the most impactful commercial product development in the furniture industry in Desa Trangsan. The result shows that furniture manufacturers face challenges in performing research for new product development and need to collaborate with furniture designers or academicians who are more industrial-oriented to deliver better designs and fresh ideas to give added value to the products and companies. The research findings can pave the way for future studies that aid manufacturers in conducting research for product and design development, which is crucial to promote innovation and drive the success of the rattan industry in Desa Trangsan.
17
Malik, Kendall, Rahmad Washinton, Ranelis Ranelis e Rahma Melisha Fajrina. "PENDAMPINGAN PENINGKATAN KOMPETENSI DAN MOTIVASI PERAJIN ROTAN DALAM PENGEMBANGAN DESAIN PRODUK ROTAN DI SENTRA ROTAN DI PADANG, SUMATERA BARAT". SELAPARANG: Jurnal Pengabdian Masyarakat Berkemajuan 6, n.º 4 (24 de dezembro de 2022): 3052. http://dx.doi.org/10.31764/jpmb.v6i4.11783.
Texto completo da fonteResumo:
ABSTRAKPeningkatan industri rotan kian meroket seiring adanya pelarangan ekspor bahan mentah rotan oleh pemerintah. Kondisi ini tentunya dapat menjadi peluang bagi industri rotan khususnya UMKM (Usaha Mikro Kecil dan Menengah) atau Sentra rotan yang bergerak dalam usaha produk rotan. Salah satu sentra rotan yang dimilikim oleh Sumatera Barat adalah Sentra Rotan Anil Furniture di Padang merupakan UMKM Produk Rotan yang masih berdiri dan bertahan dalam berjualan produk rotan. Namun selama ini pelaku UMKM produk rotan di Anil Furniture mengalami penurunan dan jalan ditempat dalam penjualan produk rotan. Hal tersebut berdampak pada penurunan motivasi perajin dalam membuat serta menjual produk rotan. Produk yang dijual di Anil Furniture masih bersifat konvensional dan minim desain, selain itu produk rotan yang dibuat masih dalam kontrol buyer sehingga perajin tidak memiliki desain secara madiri. Sementara para perajin harus tetap berkompetisi dengan produk-produk rotan yang jauh lebih banyak variannya di bangsa pasar. Program pengabdian kepada masyarakat yang dilaksanakan bertujuan memberikan motivasi agar semangat perajin dalam mengembangkan desain produk rotan dapat dilakukan dengan baik. Metode pelaksanaan yang digunakan adalah pelatihan dan pendampingan. Dalam pelatihan dilaksanakan dengan cara partisipasi, diskusi dan aplikasi antara narasumber dan mitra. Sementara dalam pendampingan dilakukan dengan cara partisipasi dan berdiskusi secara intens supaya pemahaman dapat tersampaikan antara tim PKM dengan perajin. Hasil pelaksanaan pelatihan pendampingan menunjukan perajin dapat mengembangkan desain produk rotan dan menyelesaikan ke dalam bentuk prototype. Kata kunci: rotan; motivasi; pendampingan; pengembangan desain; prototype. ABSTRACTThe increase in rattan craft industry has skyrocketed since government bans the exports of raw rattan materials. This condition can certainly be an opportunity for the rattan craft industry, especially UMKM or rattan crafting centers engaged in rattan products business. One of the rattan centers in West Sumatra is Anil Furniture Rattan Center in Padang. Anil Furniture is a surviving UMKM in producing and selling rattan products. However, so far, Anil Furniture as one of existing UMKM has declined and stuck for the sale of rattan products. The condition is impacted on the decreasing of the artisan’s motivation in making and selling rattan products. The products designs sold at Anil Furniture are still conventional and minimum. Moreover, the making of rattan products in general is still under buyer control so that the artisans do not have their own original designs. Meanwhile, artisans still have to compete with other rattan crafts products in crafts market nationwide, in which the variety of products designs are vast. The community service program carried out aims to provide motivation and rise up the awareness of rattan artisans, so that they can be passionate in properly developing rattan product designs. The implementation method used is training and mentoring. The training is carried out by participation, discussion and application between resource persons and partners. Meanwhile, mentoring is done by participation and intensive discussion so that the artisan can fully comprehend the knowledge from PKM Team. The results from implementing mentoring and training method show that the artisans can develop the design of their rattan products and complete them in prototype form. Keywords: rattan; motivation; assistance; design development; prototype.
18
Susanto, Novie, Haryo Santoso e Yana Laras Widyowati Astuti. "Behavior-Based Safety on Rattan Workers at Trangsan Rattan Industry, Sukoharjo Regency Indonesia". E3S Web of Conferences 448 (2023): 01008. http://dx.doi.org/10.1051/e3sconf/202344801008.
Texto completo da fonteResumo:
A preliminary study conducted on twenty-four rattan workers at the Trangsan Rattan Industry Center showed various types of occupational health and safety risks including respiratory disorder due to exposure of fine dust, hand tools usage , chemical hazards of using rattan coloring, and Muscoskeletal Disorders ( MSDS) due to improper working positions. This condition encourages research to improve safety behavior for workers by identifying factors related to unsafe behavior and implementing Behavior-Based Safety (BBS) for workers . The BBS approach was carried out with four stages, namely Define, Observe, Intervene, and Test (DOIT), while the level of worker behavior was calculated using the Safety Performance Index (SPI). There were ten unsafe actions that were targeted for intervention for hundreds of workers. Through an intervention program which was based on a motivational intervention approach, the value of SPI in the Trangsan Rattan Industry Center increased by 36.21%.
19
Nugrahadi, Eko Wahyu. "DAMPAK PERUBAHAN KARAKTERISTIK USAHA TERHADAP KEPUTUSAN EKONOMI RUMAHTANGGA PENGRAJIN ROTAN". Jurnal Ekonomi Pembangunan: Kajian Masalah Ekonomi dan Pembangunan 6, n.º 1 (2 de maio de 2017): 48. http://dx.doi.org/10.23917/jep.v6i1.4007.
Texto completo da fonteResumo:
Actually, rattan handicraft home industry can play three roles in the same time, as a worker supplier, producer, and consumer. In this way, we can see the relation of working time allocation, income, and household spending pattern as a system (household economic decision). In doing its economic decision, a household always interacts with its environment. Any environmental changes outside the household, such as material costs, output price, business scale, and business pattern (business characteristic factor) will give direct or indirect influence.This writing is based on the result of a research done in Sei Sikambing rattan handicraft industrial village, Medan Petisah District, Medan. The population of the research was rattan craftsman household. The sample was taken from the population using simple random sampling technique that is 35 rattan home craftsmen. The primary and secondary data gathered were analyzed based on the econometric model with 2SLS method. The analysis is conducted by performing a simulation entails several scenario alternatives.Based on the analysis result, it is found that: (I) improving business scale to small industry and changing the business pattern to subcontract may rise income and outcome for consumption and investment, (2) if these changes are done along with any rise of material and rattan products price, the income and outcome for consumption and investment will be higher, and (3) those changes will give effects to the development of job opportunity in rattan industry, unless there are any changes on the business pattern.
20
Pratono, Aluisius Hery. "Cross-cultural collaboration for inclusive global value chain: a case study of rattan industry". International Journal of Emerging Markets 15, n.º 1 (7 de fevereiro de 2019): 149–70. http://dx.doi.org/10.1108/ijoem-01-2017-0028.
Texto completo da fonteResumo:
Purpose The purpose of this paper is to understand how the cross-cultural collaboration between developed market and emerging economies promotes an inclusive global value chain (GVC) through innovation and technology transfer. Drawing on global rattan industry, this paper identifies the three typologies and social mechanism of cross-cultural collaboration in GVC. Design/methodology/approach This study uses a qualitative method with a case study of rattan industry. The case study analysis covers the linkages between upstream industries in emerging economies and downstream industries in developed countries. Findings The result shows that innovation and technology transfer play an essential role in the cross-cultural collaboration through presenting the creative value-adding process beyond the simple trade of rattan. This study identifies the social mechanism of cross-cultural collaboration in three GVC typologies of rattan industry. Research limitations/implications The study was undertaken between 2015 and 2017. The observed value chain in rattan industry context demonstrates the selected business network from Indonesia to the European countries. Practical implications There were some activities that worked well for decades, such as creative innovation and technology transfer from multinational corporations to small businesses. The initiative to promote brand seemed to work less well for the local designers in developing countries from being part of the GVC. The creative innovation and technology transfer from multinational corporations to rattan farmers continued to struggle. Originality/value This study draws a distinction between the typologies of GVC, where cross-cultural collaboration has developed slowly and those where it comes about quickly. This extends the discussion about creative value between players in developed and developing countries, including the social mechanism of cross-cultural collaboration in GVC.
21
Wambrauw, Yustina Lina Dina. "ANALISIS KEUNTUNGAN INDUSTRI ROTAN DI KOTA JAYAPURA PROVINSI PAPUA". Sosio Agri Papua 4, n.º 2 (15 de dezembro de 2015): 114–17. http://dx.doi.org/10.30862/sap.v4i2.34.
Texto completo da fonteResumo:
Economic development are described of Increasing of inventions. As a developed country many people make use harvest of forest and agriculture to get income from them. Papua has many business that use harvest of forest and agriculture for example rattan business. Research was conducted in Jayapura city by using descriptive methods with case study. Case that was acknowledged in this study are three industries of rattan that are registered in Departemen Perindustrian Perdagangan dan Koperasi (DEPERINDAKOP). Primary and secondary data were collected by direct interviews and from some instances. The results show that the average of invention of rattan industries in Jayapura city is 72.509.743, 3 per year. The business can give profit for rattan industry and generally can give contributions for development of economy in Papua.
22
Kumalasari, Galuh Wahyu. "LOCAL GOVERNMENT POLICY MODEL OF INDONESIA RATTAN HANDICRAFT CREATIVE INDUSTRY IN TRANGSAN VILLAGE". Humanities & Social Sciences Reviews 7, n.º 3 (4 de abril de 2019): 87–91. http://dx.doi.org/10.18510/hssr.2019.7313.
Texto completo da fonteResumo:
Purpose of Study: Creative industry is one of the economic sectors that important to get attention from the government. Absorption workers in the creative industry are very large considering the main capital in this industry is idea and creativity. An employee who works on large industry, often replaced by mechanical power by efficiency reason. This is different from the creative industry which had to take creativity owned by a human being to maintain its existence. The rattan industry in this area has been able to penetrate the export market in the Netherlands, Germany, The United States, and Australia. Although has penetrated the export market, a number of problems experienced by actors of the creative industry, such as difficulty in competition with other countries related to the design of products and the difficulties to participate in the event of the international exhibition.
Methodology: The methodology used in this research is nondoctrinal, its describe clearly on local government policy in the development of the rattan creative industry in Trangsan Village, Gatak, Sukoharjo, Central Java.
Results: This study found that one of an industry that relatively has been shown to be able to survive in the center of turbulence and national and global economic crisis is the rattan industry in Trangsan Village.
Implications/Applications: Looking at these problems, the local government should take an active role to provide support for rattan industries of Trangsan Village by facilitating ease licensing and integrated technical assistance in connection to promoting both through social media and facilitation to be fit for as well as in international events.
23
Susanti, Susanti, Pordamantra Pordamantra e Revi Sunaryati. "ANALISIS NILAI TAMBAH PRODUK ROTAN DI ROTANCRAF SMKN-2 KECAMATAN KATINGAN HILIR KABUPATEN KATINGAN". JOURNAL SOCIO ECONOMICS AGRICULTURAL 13, n.º 2 (5 de outubro de 2018): 37–43. http://dx.doi.org/10.52850/jsea.v13i2.462.
Texto completo da fonteResumo:
This study aims to find out the general description of the rattan processing business in the study area, knowing the management of rattan processing into furniture in the study areaand knowing the magnitude of the analysis of added value produced from rattan processing into furniture in the study area.This research was carried out in the Rotancraf processing industry of SMKN-2 Katingan Hilir, Katingan Regency, Jenderal Sudirman No. 2 Kilometer 8 Kereng Humbang Kasongan. Site selection is done purposive based on certain considerations adjusted to the research objectives on the grounds that the location of the research is the only rattan processing industry in the Katingan Hilir District. Data sources used in this study include primary data and secondary data. Primary data is data data obtained from the results of direct interviews with respondents and assisted with a questionnaire. Secondary data are data obtained from other sources such as journals, research reports, theses, internet sites, textbooks and from several government agencies related to research. The results of this study indicate that the added value obtained for rattan chairs is Rp.2.561.000 (two million fivehundred sixty one thousand rupiah). While the added value for rattan bags is Rp.2.648.000(two million six hundred forty eight thousand rupiah).
24
Aryanto, Rudy, e Syam Rizma. "Budaya dan Kualitas Kerja pada Perusahaan Manufaktur dan Eksportir Rotan". Winners 10, n.º 1 (31 de março de 2009): 66. http://dx.doi.org/10.21512/tw.v10i1.717.
Texto completo da fonteResumo:
Cane (Calamus spp), also known as rattan, is an important non-timber forest product used extensively all over Indonesia as a raw material for making furniture, handicraft, and other household articles. The study aims to generate information on production and export industry of rattan furniture, identify problems, and recommend solutions. The general problem on rattan manufacture management is human resources especially working ethos and performance of employees. The aim of this research is to analyze the influence of quality management and working ethos towards working performance of the employee at a rattan exporter and industry. Analysis method used are associative and Pearson correlation. The data collected from the employee towards quality management and working ethos, by filling out the questionnaire provided by using Likert scale that is effective to analyze the composition of the agreement and disagreement towards the statement on the questionnaire. The result achieved from this research is to learn the relation between quality management of working ethos, notify the relation between quality management and working ethos with working performance, and acknowledge the influence between quality management and working ethos, and working performance. The quality management has a low relation towards working performance. Working ethos has a strong relation with working performance. Quality management and working ethos has a strong relation towards working performance employees in rattan exporter and industry.
25
Irfan Ali, Gian Fitralisma e Nur Alia Sumanti. "Pengaruh Upah Kerja Terhadap Produktivitas Pengrajin Rotan Di PT. House Of Rattan". Jurnal Riset Manajemen, Bisnis, Akuntansi dan Ekonomi 3, n.º 1 (30 de junho de 2024): 79–100. http://dx.doi.org/10.58468/jambak.v3i1.100.
Texto completo da fonteResumo:
House of Rattan is a company operating in the furniture industry made from wood, rattan, aluminum and iron. This company collaborates with sub-partners for the rattan weaving department with a work contract agreement and piecework wages paid every week. This research is motivated by the low productivity of rattan craftsmen at PT. House of Rattan. Thus, the research objective that the author of this study wants to achieve is to find out whether wages influence the productivity of rattan craftsmen at PT. House of Rattan. The method in this study uses a quantitative approach, using data obtained by distributing questionnaires to respondents. In this research, data analysis uses data quality testing, classical assumption testing, and hypothesis testing. The population and sample in this study were rattan craftsmen at PT. House of Rattan numbering 55 people. Based on the research results, it can be seen that the Wage variable (X) has a significant influence on the Labor Productivity variable (Y), with the results of the t test, the results obtained for the Work Wage variable are tcount > ttable (6.022 > 2.004), so Ha is accepted and Ho is rejected. So, within a confidence range of 95%, it can be concluded that there is sufficient evidence to say that the wage variable has a significant effect on the productivity of rattan chair craftsmen at PT. House of Rattan ABSTRAK House of Rattan merupakan perusahaan yang bergerak di bidang industri furniture dengan berbahan dasar kayu, rotan, alumunium dan besi. Perusahaan ini bekerja sama dengan sub mitra keja untuk bagian anyam rotan dengan perjanjian kontrak kerja dan upah kerja borongan yang dibayarkan setiap minggu nya. Penelitian ini dilatar belakangi oleh rendahnya produktivitas pengrajin rotan pada sub mitra kerja di PT. House of Rattan. Tujuan penelitian yang ingin dicapai oleh penulis dari penelitian ini adalah untuk mengetahui apakah Upah berpengaruh terhadap Produktivitas pengrajin rotan pada PT.House of Rattan. Metode pada penelitian ini menggunakan pendekatan kuantitatif, dengan menggunakan data yang diperoleh dengan menyebarkan kuesioner kepada responden. Dalam penelitian ini menggunakan analisis data uji kualitas data, uji asumsi klasik, dan uji hipotesis. Populasi dan sampel dalam penelitian ini adalah pengrajin rotan pada Sub Mitra Kerja PT. House of Rattan yang berjumlah 55 orang. Berdasarkan hasil penelitian dapat diperoleh bahwa variabel Upah (X) memiliki pengaruh signifikan terhadap variabel Produktivitas Tenaga Kerja (Y), dengan hasil uji t diperoleh hasil untuk variabel Upah kerja diperoleh nilai thitung > ttabel (6,022 > 2,004) maka diterima dan Ho ditolak. Sehingga pada rentang kepercayaan sebesar 95% didapatkan kesimpulan bahwa terdapat cukup bukti untuk mengatakan bahwa variabel upah kerja berpengaruh signifikan terhadap produktivitas pengrajin kursi rotan di PT. House of Rattan.
26
Kalima, Titi, Ratih Damayanti e Adi Susilo. "Rotan Potensial dari Hutan Bukit Lubuk Pekak, Merangin, Jambi". Journal of Tropical Biodiversity and Biotechnology 4, n.º 1 (30 de abril de 2019): 32. http://dx.doi.org/10.22146/jtbb.40645.
Texto completo da fonteResumo:
Rattan is a potential non-timber forest product. It grows in almost all parts of Indonesia, and has been widely used and traded. Indonesia as the largest rattan producer in the world supplies about 85% of world rattan needs. Bukit Lubuk Pekak Forest is part of the Production Forest Management Unit (KPHP) area, Merangin District, Jambi Province. The threat form rattan exploitation is increasing, especially in the Bukit Lubuk Pekak. Therefore, it is necessary to conduct study on the potency of rattan in that area for future conservation efforts. This study aimed to investigate rattan species in Bukit Lubuk Pekak forest, Merangin District, Jambi Province. Information of the potency of rattan is essential to support rattan industries. To complete data of rattan potency from Sumatra, an exploration in this area was carried out in July 2016 in Bukit Lubuk Pekak Forest. The study was conducted by purpossive sampling. Identification on morphological characteristics of rattan were performed on all parts of plants including fruits and seeds (if available). The results showed that there were four rattan genus in Bukit Lubuk Pekak Forest: Calamus, Daemonorops, Korthalsia, and Plectocomiopsis. They consisted of nine species, namely Calamus caesius, C. exillis, C. insignis var. longispinosus, C. laevigatus, C. tumidus, Daemonorops micracantha, D. didymophylla, Korthalsia flagellaris, and Plectocomiopsis geminiflora. Among the nine species, two species that is Calamus caesius and Daemonorops didymophylla have been cultivated for industry raw materials and drug, respectively.
27
Hartanto, Susi, e Tanu Rudyanto. "PENELITIAN SECANG SEBAGAI PEWARNA ALAMI ROTAN DAN APLIKASINYA PADA PRODUK HOME DECOR". Jurnal Dimensi Seni Rupa dan Desain 14, n.º 1 (18 de fevereiro de 2017): 15. http://dx.doi.org/10.25105/dim.v14i1.2325.
Texto completo da fonteResumo:
<p><strong>Abstract</strong><br />Synthetic colorants (lacquer or nitro-based clear finishes, cellulose acetate butyrate - CAB, polyurethane, acid catalyst clear lacquers, polyester, waterbased colorants, etc) are commonly used to produce colors on various rattan products. Although water based colorants are claimed to be environmentally friendly, but many industry stakeholders still continue using other synthetic colorants due to cost consideration.<br />As an effect, environmental cost is inevitable. Prior experiment shows that natural colorant like sappanwood produce red color on rattan peel, though color adhesiveness is not stable. This re search maintains focus on sappanwood as natural red colorant, but type of rattan is shifted to rattan flat core, presumed to produce higher color adhesiveness and stability. Result of research is applied on home décor products, using small to medium home industry quantity to test the stability and uniformity of colors on one production batch. Future research may use this reference to investigate other natural rattan colorants. Keywords: sappanwood, rattan, natural colorant, red</p><p> </p><p><br /><strong>Abstrak</strong><br />Produk rotan pada umumnya diberi pewarna sintetis (NC, Stain, Fancy Colors, pewarna water based, dan lainnya) untuk menghasilkan berbagai macam warna. Walaupun pewarna water based diklaim lebih ramah lingkungan, tetapi masih banyak pelaku industri yang menggunakan pewarna sintetis lainnya karena harganya yang lebih ekonomis, dan akibatnya, pasti ada pencemaran lingkungan. Sesuai eksperimen sebelumnya, pewarna alami seperti secang bisa menghasilkan warna alami merah pada rotan peel (kulit), walaupun daya rekat warnanya belum maksimal. Penelitian kali ini berfokus tetap pada secang, namun jenis rotan sesuai asumsi dialihkan menjadi jenis fitrit agar daya rekat dan ketahanan warna lebih tinggi. Hasil penelitian diaplikasikan pada produk dekorasi/ aksesoris dengan kuantitas produksi kecil-menengah untuk menguji kestabilan hasil pewarnaan pada satu kali produksi.<br />Diharapkan penelitian ini bisa menjadi referensi untuk penelitian pewarna<br />alami rotan lainnya.<br /><br /></p>
28
Hardati, Ratna Nikin, Siti Muslikah, Warsito Warsito e Mustaufir Mustaufir. "Pendampingan dan Pelatihan dalam Meningkatkan Kualitas Produksi Kursi Rotan di Kelurahan Kedungkandang Kota Malang". Jurnal Surya Masyarakat 6, n.º 1 (30 de novembro de 2023): 60. http://dx.doi.org/10.26714/jsm.6.1.2023.60-65.
Texto completo da fonteResumo:
Currently, many people are pursuing small home industries to improve their welfare and support the resilience of the national economy. One of the home industries that manages wood to make rattan chair crafts is owned by Mr. M. Shodiq in the Kedungkandang sub-district, Kedungkandang sub-district, Malang City. However, several obstacles are still faced by these small industries, including obstacles in increasing the quality and quantity of rattan chair handicraft production due to several factors such as: lack of knowledge about how to process good and varied rattan chair crafts from both the shape and motif aspects, the use of tools which has not been touched by science and technology. The method of community service is socialization about innovation in the development of rattan chair product quality, namely by providing training materials on the use of innovative tools to develop and improve the rattan chair craft industry. The results of this community service include 1) partners have received education and skills in diversifying rattan chair craft products, 2) partners have received appropriate technology-based tools in the form of rattan cutting machines to increase product sales.
29
Sanjaya, Deny Wirawan, e Sesilya Kempa. "Examining Entrepreneurial Success Factors of Women-Owned SMEs in Rattan Craft". Jurnal Penelitian Ekonomi dan Bisnis 7, n.º 2 (1 de outubro de 2022): 81–89. http://dx.doi.org/10.33633/jpeb.v7i2.4731.
Texto completo da fonteResumo:
The rattan craft industry is one of the most significant contributors to the economy, and women own this business. However, the success of the rattan craft SME is influenced by internal and external factors. This study aims to determine the effect of the personal aspects, environmental aspects, and government support on entrepreneurial success in rattan craft SME women. Data collection was carried out using a questionnaire. The sample used was 100 women SME owners of rattan craft. The sampling technique in this study is to use the accidental sampling technique. The analytical method used is multiple linear regression analysis (SPSS). The results showed that personal and environmental aspects, as well as support from the government, determine the success of rattan craft SMEs that belong to women entrepreneurs. The most considerable influence is from the personal aspect, in which family background and support play an essential role.
30
Damayati, Ashintya, e Nachrowi Djalal Nachrowi. "Pengaruh Larangan Ekspor Bahan Baku terhadap Kinerja Perusahaan Rotan Indonesia". Jurnal Ekonomi dan Pembangunan Indonesia 14, n.º 1 (1 de julho de 2013): 43–62. http://dx.doi.org/10.21002/jepi.v14i1.451.
Texto completo da fonteResumo:
AbstractThis research analyzes the impacts of raw material export restriction on firm performance: value-added, labor, and productivity growth, as well as firm survival ability in the rattan-based final good industry in the 1995-2004 period, which are distinguished based on firm size. This study uses probit method for the survival model, and the Ordinary Least Square (OLS) for the growth model. Data obtained from Medium and Large Scale Industries Statistics (ISIC 33131 and 33212). The result shows that export restriction can improve survival ability of the medium and large-sized firm, and have a positive impact on value-added and labor growth of the medium-sized firm.Keywords: Export Restriction on Rattan Raw Material, Firm Growth, Firm Survival, Rattan-Based Final Goods Industry AbstrakStudi ini membahas pengaruh dari kebijakan larangan ekspor bahan baku terhadap kinerja perusahaan: pertumbuhan nilai tambah, tenaga kerja, dan produktivitas, serta kemampuan bertahan perusahaan barang jadi rotan di dalam industri pada periode 1995-2004, yang dibedakan berdasarkan ukuran perusahaan. Studi ini menggunakan metode probit untuk model kemampuan bertahan perusahaan dan Ordinary Least Square (OLS) untuk model pertumbuhan. Data diperoleh dari Statistik Industri Besar dan Sedang (ISIC 33131 dan 33212). Hasil studi menunjukkan bahwa kebijakan larangan ekspor bahan baku rotanmampu meningkatkan kemampuan bertahan perusahaan sedang maupun perusahaan besar, serta juga akan berdampak positif terhadap pertumbuhan tenaga kerja dan nilai tambah perusahaan sedang.Kata kunci: Industri Barang Jadi Rotan, Kemampuan Bertahan Perusahaan, Larangan Ekspor Bahan Baku Rotan, Pertumbuhan Perusahaan
31
Muis, Indra, Solikin Solikin e Dwiza Riana. "Strategic Marketing and Digital Marketing Training Activities for the Rattan Processing Industries in Cirebon Regency [Pelatihan Pemasaran Strategik dan Digital untuk Industri Pengolah Rotan di Kabupaten Cirebon]". Proceeding of Community Development 2 (21 de fevereiro de 2019): 665. http://dx.doi.org/10.30874/comdev.2018.400.
Texto completo da fonteResumo:
The aim of organizing strategic marketing and digital marketing training activities for the rattan processing industries in Cirebon Regency, West Java, Indonesia was to provide knowledge and skills in strategic and digital marketing. The training which was held for 8 (eight) hours was attended by 20 marketing managers and owners of the rattan processing industries who were members of the Cirebon Regency Association of Indonesian Industry and Crafts Association. It is hoped that through this training the participants would be able to improve the performance of export marketing of rattan-based products to foreign countries through their competitive advantages. The training methods used are lecturing, group discussion, and training evaluation. The results of the training were that participants were able to explain how to implement a market orientation culture in their business operations. In addition, the participants were also able to explain the efforts made in implementing export marketing strategies and export marketing capabilities. The trainees were also able to explain the factors that influence export marketing performance. Furthermore, this training also improved the skills of managers in implementing digital marketing approach in the marketing activities of the rattan processing industry.
32
Silitonga, Febriani, Sunaryo Neneng e Dedi Takari. "Analisis Pengaruh Investasi Modal dan Upah dalam Penyerapan Tenaga Kerja di Industri Anyaman Rotan Kota Palangka Raya". JEMBA : Jurnal Ekonomi Pembangunan, Manajemen dan bisnis, Akuntansi 1, n.º 1 (15 de março de 2021): 1–8. http://dx.doi.org/10.52300/jemba.v1i1.2486.
Texto completo da fonteResumo:
Research on the speed of development economic growth in the rattan wicker industry during the COVID-19 pandemic aims to analyze that the value of capital investment and wages has a significant effect on labor absorption in the rattan woven industry in the city of Palangka Raya. The benefits of this research can add knowledge and insight, especially how the industrial development of rattan woven in Palangka Raya City. The data used in this study are primary data and data collection was done by interviewing 25 respondents, the data that had been collected were processed and analyzed using multiple linear regression. The results showed that the added value of investment, wages and capital together up to a confidence level of 80% had a significant effect on the employment of the rattan weaving industry in Palangka Raya City. In terms of the investment value variable, every time there is an increase in investment value of 1%, it can cause the increase in labor absorption to be 8.275%. Every 1% increase in the value of capital can cause the increase in labor absorption by 3.351%. Each 1% increase in the value of wages can cause the increase in labor absorption by 1.987%. For the handicraft industry in taking the given capital assistance, it is better to pay attention to the management of that capital. The need for financial records must also be considered so that there is transparency to various parties regarding capital and income. So that this research can be a reference in further research regarding the rate of economic growth which has an impact on other handicraft industries in Indonesia, so that this business remains sustainable
33
Dewantara, Iswan, Herlina Darwati e Nanda Sulistiawati. "POTENSI DAN POLA PENYEBARAN JENIS-JENIS ROTAN DI PT. HUTAN KETAPANG INDUSTRI KECAMATAN KENDAWANGAN KABUPATEN KETAPANG KALIMANTAN BARAT, STUDI KASUS: DESA PANGKALAN BATU DAN DESA KEDONDONG". JURNAL HUTAN LESTARI 11, n.º 4 (21 de novembro de 2023): 1033. http://dx.doi.org/10.26418/jhl.v11i4.70288.
Texto completo da fonteResumo:
PT. Hutan Ketapang Industri (HKI) is a company engaged in the rubber industry with a concession area of approximately 100,000 hectares in Ketapang Regency, West Kalimantan Province. Pangkalan Batu Village and Kedondong Village are located in the Kendawangan Block where the people who live around them still use natural products such as rattan. Rattan is a kind of climbing palm that belongs to the Arecaceae family. Rattan is one of the potential non-timber forest products that is widely used because of its high value in world trade. The purpose of this study was to obtain data on the type, potential and distribution pattern of rattan in the area of PT Hutan Ketapang Industri, Kendawang District, Ketapang Regency. The research was conducted using the double plot method, with a total of 11 plots. Plot placement was done deliberately (purposive sampling). The results showed that there were 5 types of rattan which had very large potential and a wide distribution was found in oxysol and entisol soil types with scattered and clustered distribution patterns. The rattan that has the greatest potential is Calamus mattanensis Becc with a potential of 7,125 individuals per hectare. Keywords: Morphology, Non-Timber Forest Products, RattanAbstrakPT. Hutan Ketapang Industri (HKI) adalah perusahaan yang bergerak di bidang industri karet dengan luas konsesi sebesar kurang lebih 100,000 hektar di Kabupaten Ketapang, Provinsi Kalimantan Barat. Desa Pangkalan Batu dan Desa Kedondong terdapat di Blok Kendawangan dimana masyarakat yang tinggal disekitar masih menggunakan hasil alam contohnya rotan. Rotan merupakan jenis palem memanjat termasuk ke dalam famili Arecaceae. Rotan merupakan salah satu hasil hutan non kayu yang potensial, banyak dimanfaatkan karena nilainya yang tinggi dalam perdagangan dunia. Tujuan dari penelitian ini adalah untuk mendapatkan data jenis, data potensi dan pola penyebaran rotan yang ada di area Kawasan PT Hutan Ketapang Industri Kecamatan Kendawang Kabupaten Ketapang. Penelitian dilakukan dengan menggunakan metode petak ganda, dengan jumlah petak sebanyak 11 petak. Peletakan petak dilakukan secara sengaja (purposive sampling). Hasil penelitian menunjukkan terdapat 5 jenis rotan yang memiliki potensi yang sangat besar dan memiliki sebaran yang luas dan ditemukan pada jenis tanah oxisol dan entisol dengan pola penyebaran menyebar dan mengelompok. Rotan yang memiliki potensi terbesar merupakan Calamus mattanensis Becc dengan potensi 7.125 individu per Ha.Kata kunci: Hasil hutan bukan kayu, Morfologi, Rotan
34
Nur Aulia, Elsa Silvia. "Analysis of Digital Supply Chain Management in the Development of Export Products for Rattan Crafts in Cirebon". Jurnal Sosioteknologi 21, n.º 3 (28 de dezembro de 2022): 308–15. http://dx.doi.org/10.5614/sostek.itbj.2022.21.3.7.
Texto completo da fonteResumo:
This research is motivated by the fact that in Cirebon West Java, which is the largestrattan craftsman area in Indonesia, was found that there are many unresolved obstaclesin the development of rattan craft products that will be exported to several countries.The obstacles include the supply chain or the availability of raw materials, the lackof capital for small and medium industry (IKM) stakeholders, and the lack of humanresources management (HRM) as a form of regeneration for rattan craft craftsmen.This study used a qualitative approach where data were collected through observation,documentation, and interviews. The results of this study show that the problems facedby rattan handicraft producers are: 1) a lack of availability of raw materials caused bylong shipping distances, such as from Sulawesi and Kalimantan to Cirebon; 2) a lackof capital that can be absorbed by small entrepreneurs to continue to be able to run thisrattan craft business because of the lack of attention given to small entrepreneurs fromboth the government of Cirebon and the World Bank. 3) the lack of human resourcemanagement for rattan handicraft producers due to the lack of interest from the youngergeneration and the lack of a training platform for the younger generation to continuethis rattan craft relay from time to time.
35
Erviyani, Erviyani, Makkarennu Makkarennu, Muhammad Alif Kaimuddin Sahide e Asar Said Mahbub. "Analisis Tata Niaga Rotan di Kelurahan Batu Kecamatan Pitu Riase Kabupaten Sidenreng Rappang". Jurnal Hutan dan Masyarakat 9, n.º 1 (30 de julho de 2017): 1. http://dx.doi.org/10.24259/jhm.v9i1.2040.
Texto completo da fonteResumo:
This study have purpose to determine the rattan trading channel and rattan trading functions, to know the interests of actors who play a role in every channel of rattan commerce and to know the power relations of each actor in the rattan trading channel. The research was conducted in February 2017 with the research location in Batu Village Pitu Riase Sub-District Sidenreng Rappang Regency. Sampling was done by purposive sampling with farmer sample as many as 5 samples. For the involved trading institutions are determined by a search method in which 3 collectors sample sample and 1 sample of wholesalers. The data used are primary data and secondary data. Method of data analysis used is descriptive analysis to analyze farmer selling price and buying price of intermediary trader and to know the interest and relation of actor who play role in rattan trading channel. The results conclude that there is one trade channel in the research area, namely: farmers - collectors traders - wholesalers. The results of operational efficiency analysis show that the trading system channel is not efficient yet. The reason is the farmers still play a role as the recipient of the price. The level of importance between the actors on the rattan trading channel in Batu Village is different. Of the three elements of power (trust, incentive and coercion) can be concluded that the actors are influential and have the highest power of traders (industry).
36
Cahyadi, Dwi, Siti Haida Ismail, Mohd Yusof M. D. Daud, Roslina Mohammad, Muh Irwan e Ratna Wulaningrum. "Utilization of Anthropometric Data to Determine Strap Length for Rattan Shoulder Bag Products in Indonesia". E3S Web of Conferences 500 (2024): 03033. http://dx.doi.org/10.1051/e3sconf/202450003033.
Texto completo da fonteResumo:
The straps of rattan bag handicraft products in Indonesia have different shapes and sizes. This can be observed from the straps of rattan shoulder bags designed to have a permanent size, leading to the lack of flexibility in increasing or decreasing the length of the bag to fit the height of the users. Therefore, this study aimed to design a standard ergonomic strap length for rattan shoulder bags in order to ensure compatibility with small, medium, and large-sized users in Indonesia. The process was conducted through the retrieval of anthropometric data for women between the ages of 17 and 45 years for calculations. The results showed that 60 cm was the appropriate length for small-sized users, 85 cm for medium, and 100 cm for large. The implication of the results was to provide support for the production of different strap length designs based on the differences in the type of bag and body size. Moreover, the results contributed to the rattan handicraft industry by providing recommendation on the standard strap lengths for shoulder bags to be produced.
37
Wardani, Ivien Aryo Puspita, R. Siti Rukayah e Agung Dwiyanto. "STRATEGI PENGEMBANGAN KAMPUNG WISATA ROTAN GALMANTRO YANG BERKELANJUTAN". Jurnal Arsitektur ARCADE 8, n.º 1 (27 de março de 2024): 35–41. http://dx.doi.org/10.31848/arcade.v8i1.1132.
Texto completo da fonteResumo:
Abstract: Galmantro Rattan Tourism Village has attractions such as rattan handicrafts, rattan production houses with traditional and modern architecture, friendly residents and easy access from the city center. Tourism activities with the craft industry becoming a tourist village can create job opportunities, reduce proverty levels and encourage economic development. Galmantro Rattan Tourism Village has potential to develop into a sustainable tourism village. The development of sustainable tourism village is a form of environmental, nature, culture and welfare of the local community. This study intended to provide a strategy formulation about sustainable development of Galmantro Rattan Tourism Village. The method used in this study is mixed method that combines quantitative and qualitative. Strategy formulation will be analyzed using SWOT analysis. There are four strategies, namely optimizing the management of tangible and intangible cultural tourism, utilizing open space as a tourist attraction facility, optimize the potential of home-based enterprises by processing waste and using efficient energy as well as improving accessibility and transportation system.Abstrak: Kampung Wisata Rotan Galmantro memiliki daya tarik seperti kerajinan rotan, rumah produksi kerajinan rotan dengan arsitektur tradisional dan modern, keramahan warga dan mudah dijangkau dari pusat kota. Kegiatan pariwisata dengan industri kerajinan menjadi kampung wisata dapat menciptakan peluang kerja, menurunkan tingkat kemiskinan dan mendorong pengembangan ekonomi. Kampung Wisata Rotan Galmantro berpotensi untuk berkembang menjadi kampung wisata yang berkelanjutan. Pengembangan kampung wisata berkelanjutan merupakan bentuk kepedulian terhadap lingkungan, alam, budaya dan kesejahteraan masyarakat setempat. Tujuan dari penelitian ini untuk memberikan perumusan strategi mengenai pengembangan kampung wisata rotan Galmantro yang berkelanjutan. Metode penelitian yang digunakan adalah mix method yang menggabungan teknik kuantitatif dan kualitatif. Perumusan strategi akan di analisis menggunakan analisis SWOT. Penelitian ini menghasilkan empat strategi yaitu mengoptimalkan pengelolaan wisata budaya tangible dan intangible, pemanfataan ruang terbuka sebagai fasilitas atraksi wisata, mengoptimalkan potensi HBE dengan pengolahan limbah dan penggunaan energi yang efisien serta meningkatkan kemudahan aksesibilitas dan sistem transportasi.
38
Rathnayaka, R. M. K., e D. Kodithuwakku. "The Current Challenges in Sri Lanka’s Rattan Manufacturing Industry". TRIVALENT ත්රිසංයුජ: Journal of Archaeology, Tourism & Anthropology 2, n.º 1 (30 de dezembro de 2021): 32. http://dx.doi.org/10.4038/tjata.v2i1.53.
Texto completo da fonte
39
Hartono, Sri, e Agus Sobari. "The role of cluster cycle and pattern of interaction to competition strategy". Problems and Perspectives in Management 14, n.º 2 (11 de maio de 2016): 74–83. http://dx.doi.org/10.21511/ppm.14(2).2016.08.
Texto completo da fonteResumo:
Many studies show that industrial clusters have been successfully promoting the progress of small and medium enterprises (SMEs). Therefore, many governments around the world, including Indonesia, enthusiastically perform comparative studies of cluster policy. Thus, it is important to understand the characteristics of the business of small and medium industries as input in formulating the policy of industrial clusters. Research objectives are focused on the early stages of analysis as to whether the cluster of wood and rattan furniture industry which has existed long enough in Jepara, Central Java, Indonesia, has formed a pattern of awareness among employers in considering the benefits proportionally between cooperation and competition. In various scientific literature reviews, this issue was named by the term coopetition. Thus, the benefits of this research are useful in formulating policy toward strengthening the industrial cluster furniture and rattan towards a more integrative of industrial clusters, and supporting industries involve complex, well integrated backward (backward linkage) and integrated into the front (forward linkage). In the end, it is expected that increasingly mature industrial clusters of wooden furniture and rattan will be transformed into a form of industrial agglomeration and positively impact on strengthening the competitiveness of the furniture industry widely influential in regional and national economy. The test results show that nearly all of the dimensions of a differentiator (discriminant factor) are significant by influence on differentiating into three patterns of interaction between companies in the cluster of wooden furniture and rattan, while there is only one dimension that is not significant, i.e., the horizontal dimension of cooperation. These results indicate that the industrial cluster of wooden furniture and rattan in Jepara have long formed, where the cycles and patterns of cooperation are factors that could indicate variations in differences concerning perceptions of entrepreneurs in the wood and rattan furniture cluster. Results of the analysis with the approach of the discriminant also show the forming awareness of employers about balancing the important role of competition. It is, as well as cooperation in the industrial cluster wood and rattan furniture from Jepara being already cycle of clusters, characterized by maturity. The cooperation is characterized by bilateral, multilateral, and vertical indicating that the cluster is ready to metamorphose into a form more complicated than an agglomeration. This condition needs to be examined further to see the impact of the maturity cycle of an industrial cluster and more complex patterns of cooperation towards the formation prerequisite agglomeration, and its impact on industrial performance and competitiveness clusters in the aggregate, as well as the economic development of the region
40
Wulandari, Retno. "ANALISIS TITIK IMPAS PADA INDUSTRI ROTAN HIDAYAH SIDOREJO KECAMATAN CURUP TENGAH". Jurnal Ilmiah Raflesia Akuntansi 6, n.º 2 (26 de outubro de 2020): 34–45. http://dx.doi.org/10.53494/jira.v6i2.48.
Texto completo da fonteResumo:
Good profit planning will affect the success of the business in achieving optimal profit. The calculation of future profits is very useful for preparing the profit planning process. In general, almost all management decisions will have more impact on activities or attitudes in the future than on past activities or attitudes. Thus management decision making is a continuous process. This continuous process makes management must be able to anticipate upcoming events and plan what must be done, including planning company profits. Profit Volume Cost Analysis (cost-volume-profit analiysis) is often called a break event point analysis because of the significance of the break event point in this analysis, in the profit volume cost analysis, volume refers to all activity cost triggers, such as sales units are assumed to collaborate with changes in income, costs and profits. Based on the results of the analysis, it can be concluded as follows; The amount of break even points for living room chair products in Hidayah Sidorejo's rattan industry is 4 units, meaning that the company will be in a position where the profit is equal to 0. The amount of contribution margin for living room chair products in Hidayah Sidorejo's rattan industry is Rp. . 2,879,000 The operating profit target is assumed if Hidayah's rattan industry is targeting a profit of Rp. 10,000,000, then the number of units that must be sold is 7 units of living room chairs. The results of the cost volume profit analysis in the decision making for advertising spending show that Hidayah's rattan industry decides to advertise in the newspaper with an advertising cost of Rp. 1000,000, then this will increase the contribution margin by Rp. 2,879,000 and operating profit increased to Rp. 1,879,000 even though the cost continued to increase to Rp. 11,000,000 The results of the cost volume profit analysis in decision making to reduce the selling price from Rp. 6000,000 / chair set becomes Rp. 5,000,000 / set of chairs will reduce the contribution margin by Rp. 10,000,000, although if you lower the selling price the sales will increase to 10 units.
41
Sarjiyanto, Sarjiyanto, Ana Shohibul, Sarwoto Sarwoto, Mulyadi Mulyadi e Suryadari Istiqomah. "Grebeg Penjalin: Komoditifikasi Budaya pada Pemberdayaan Masyarakat Desa Wisata Rotan Trangsan-Sukoharjo". Aksiologiya: Jurnal Pengabdian Kepada Masyarakat 6, n.º 2 (30 de maio de 2022): 298. http://dx.doi.org/10.30651/aks.v6i2.4903.
Texto completo da fonteResumo:
The purpose of community service in the Trangsan Rattan Tourism Village is to maintain the sustainability of the existence of the rattan industry center. This activity also aims to empower the potentials that are in the location and synergize the socio-economic and cultural potential in an effort to increase empowerment and improve the welfare of citizens in Rotan Tourism Village. The dedication method uses a study-action and participatory approach. Culture as an agent of change through the creation of the cultural event "Grebeg Penjalin" which is held as an annual agenda in the Tangsan Rotan Tourism Village as a cultural commoditization. The results of dedication indicate the commoditization of culture can be an effective attraction. The holding of the Braiding “Grebeg Penjalin" chosen as a cultural event has proven to be able to be an effort to maintain the existence of the Trangsan Rattan Tourism Village which directly contributes to the improvement of the welfare of the people in Trangsan.
42
Nurhalita, Siti, e Marliyah Marliyah. "Implementation of Creative Economy in Improving Economic Welfare Maqāṣid Al-Sharīʿah Perspective (Case Study: Rattan Craftsmen of Jentera Stabat Village)". JESI (Jurnal Ekonomi Syariah Indonesia) 13, n.º 2 (3 de junho de 2023): 157. http://dx.doi.org/10.21927/jesi.2023.13(2).157-169.
Texto completo da fonteResumo:
<p>Creative economy development can increase people's income in Jentera Stabat Village, which is one of the Creative Economy Areas, where almost every family becomes a rattan woven craftsman. UD. The Ambane area is one of the places where creative economic industry activities develop, especially rattan woven craftsmen. UD. Medan Ambane seeks to provide proper wages to rattan-woven craftsmen so that their lives can be more prosperous. The wages of the rattan woven craftsmen are 250,000 - 400,000 set with a processing time of around 5 - 7 days depending on the complexity of the pattern and the shape of the woven. This study aims to determine the increase in the economic welfare of rattan craftsmen from the perspective of machair sharia and the creative economy. This research is qualitative research using a descriptive approach, resulting in an in-depth description of the welfare of the rattan craftsmen in Jentera Stabat Village. To obtain data, researchers used an instrument in the form of in-depth interviews. So the results of the study indicate that the wicker rattan chair business is carried out by UD. Ambane event from the perspective of sharia maqhasid has brought positive changes because the existence of a wicker chair business plays a role in increasing people's income and can create jobs for the surrounding community. Based on maqhasid sharia according to Ibnu Asyur who applies 8 elements related to employment, it is concluded that UD. The Ambane event in Muamalah Intensification provides direct training to craftsmen, and for Gharar which is difficult to avoid by UD's business. The Ambane event does not burden every small mistake made by the craftsmen because the business owner will provide the right solution. Owner of UD. The Ambane event also provides working hours from morning to night according to the needs of the craftsmen provides decent wages, and avoids elements of slavery.</p>
43
Yuniarti, Evi, Artie Arditha e Nurmala Nurmala. "THE EFFECT OF QUALITY COST ON THE RATTAN INDUSTRY PERFORMANCE". Saburai International Journal of Social Sciences and Development 2, n.º 1 (6 de maio de 2018): 39. http://dx.doi.org/10.24967/saburaiijssd.v2i1.330.
Texto completo da fonte
44
Putri, Ika Swasti, e Dwi Wahyuningsih. "Peran Ekonomi Kreatif dalam Pemberdayaan Ekonomi Masyarakat di Desa Wisata Rotan Trangsan, Gatak, Kabupaten Sukoharjo". Global Financial Accounting Journal 5, n.º 1 (30 de abril de 2021): 1. http://dx.doi.org/10.37253/gfa.v5i1.4356.
Texto completo da fonteResumo:
The current pandemic situation shows that the creative economy is a solution for economic progress because it can create jobs, increase export revenues, as well as promote the potential of various regions so that it can attract investors. Trangsan Village, Gatak District, Sukoharjo Regency is an area known for its rattan-based handicrafts. This craft can be used as raw material for various household furniture such as tables, chairs, wall hangings, and so on. The pandemic situation has made Trangsan Village rattan craftsmen innovate in order to continue to gain profits. Rattan craftsmen in Trangsan Village became the object of this study so that this research was qualitative and was conducted in January 2020. Interviews and observations were carried out as a method for researchers to obtain data using a qualitative approach. Based on the results of the research, it was found that the role of the creative economy for the creative industry in Trangsan Village after Covid was to be able to empower the community, spur people's creativity to maximize resources and increase foreign exchange for the local government, especially Sukoharjo Regency in the midst of a pandemic.
45
Suroto, Suroto. "PENGARUH UKURAN DAN KONSENTRASI PEREKAT TERHADAP SIFAT FISIK DAN MEKANIK PAPAN PARTIKEL LIMBAH ROTAN". Jurnal Riset Industri Hasil Hutan 2, n.º 2 (31 de dezembro de 2010): 18. http://dx.doi.org/10.24111/jrihh.v2i2.1143.
Texto completo da fonteResumo:
Shavings rattan waste from the rattan industry can be made into particle board which the addition of glue and hot pressing. The various of the particle length compositions are, 100% of 1cm of size, mixture of 1cm and 3cm (50%,50%), 1cm and 5 cm (50%, 50%), 3 cm (100%), 3 cm and 5 cm (50%, 50%), and 5 cm (100%). Each of combination was added by 6% and 12% concentration of urea formaldehide glue (UF). All of the physical and mechanical test results are fulfil the Indonesian Standard of particle board (SNI.03-2105-2006). Those results are water content 12,36 – 12,49%, thickness increase value 12,25 – 14,15%, density 0,56 – 0,69 g/cm3, hardness 83 – 155 kg/cm2, broken strenght (MOR) 115 – 1306 kg/cm2, bending strenght (MOE) 547 – 6917 kg/cm2, The best result for Particle was shown in and 6% of the glue addition. The particle boards are classified as medium density board class which has 0,40 – 0,80 g/cm3 of density. Base on the density chriteria and the glue, the particle board can be use for parts of interior material such as cabinets, desks, bookcase, and etc. Key wood : particle board, rattan waste
46
Santoso, Adi. "Analisis Perbandingan Metode Just In Time dan Economic Order Quantity". Jurnal Teknik Industri 10, n.º 1 (22 de fevereiro de 2010): 7. http://dx.doi.org/10.22219/jtiumm.vol10.no1.7-12.
Texto completo da fonteResumo:
UD Surabaya Rattan Industry as the middle scale of company is produced rattan chairs. This company is based on the job order to plan and develop the future company to its business strategy become mass production. In process production, the company always faces problems in the row material supply. If the row material supply is saved in long time period and there is bulking in storage it can make the rattans will be under level quality. The purpose of this research is giving information about the choosing methods of planning, controlling the row material supply with differ between Just in Time (JIT) method with Economic Order Quantity (EOQ) to minimize inventory value. The result of from chosen method for the planning of inventory control of raw material. Total Inventory Cost (TIC) which in it there are three element of it expense of that is expense of purchasing, expense of ordering, and also stock holding cost got TIC for the Method of Just in Time (JIT) period 13 to Rp233.129.629,71. While for the Method of Economic Order of Quantity (EOQ) at period 13 to Rp234,171,969.21. Calculation of Total Inventory Cost (TIC) as a whole ( period of time 1 year) by applying Method of Just In Time ( JIT) it can be seen Totalize Inventory Cost (TIC) Rp5,012,483,943.59 while by applying Economic Order of Quantity (EOQ) from Total of Inventory Cost (TIC) Rp518,088,399.86. Becoming method planning of inventory control the selected method of Just In Time (JIT) with thrift equal to Rp5,604,456.27.
47
Tajuddin, Rosnida, e Nor Syafiqah Salleh. "Arbuscular Mycorrhizal Association with Rattan Species of the Belum-Temengor Forest Complex, Perak, Malaysia". Pertanika Journal of Tropical Agricultural Science 45, n.º 1 (10 de fevereiro de 2022): 301–19. http://dx.doi.org/10.47836/pjtas.45.1.18.
Texto completo da fonteResumo:
Rattan Calamus spp. is a high commercial value palm from the subfamily Calamoideae the primary source for cane in the well-developed rattan industry. Most studies on rattan have focused on its biodiversity, distribution, quality, strength, physical, mechanical, and morphological properties and genetics. Still, only a few have investigated the association of rattan with arbuscular mycorrhizal (AM) fungi. These mycorrhizal fungi are well known to play essential functions as promoting plant growth, maintaining plant community biodiversity and nutrient cycles in soil. This study aims to identify the established AM fungi community and their ecological interactions with Calamus spp. in the Belum-Temengor Forest Complex, Perak, Malaysia. Calamus spp. roots and their rhizospheric soil samples were collected from six sampling sites in the Belum-Temengor Forest Complex, one of the oldest rainforests in the world. The degree of mycorrhizal colonisation in Calamus spp. was evaluated using the grid lines method. At the same time, the AM fungi spore diversity in the rhizospheric soils were isolated using the wet sieving method and identified taxonomically analysed into different genera. Calamus insignis showed the highest degree of mycorrhizal colonisation amongst all the Calamus spp. present on the sampling sites. The AM fungi spores isolated from the rhizospheric soil from Belum-Temengor Forest Complex belonged to the genera Acaulospora, Entrophospora, Gigaspora, Glomus, and Scutellospora. Glomus was the most frequently found genus in all the sampling sites. This study is the first record of the AM fungal diversity found in the Belum-Temengor Forest Complex.
48
Vania, Tiara, e Rara Sandhy Winanda. "OPTIMASI PERENCANAAN PRODUKSI KERAJINAN ROTAN DI ANGGA FURNITURE MENGGUNAKAN LINEAR PROGRAMMING". Jurnal Lebesgue : Jurnal Ilmiah Pendidikan Matematika, Matematika dan Statistika 5, n.º 1 (30 de abril de 2024): 300–306. http://dx.doi.org/10.46306/lb.v5i1.560.
Texto completo da fonteResumo:
Production planning is an activity to obtain products in accordance with the needs of two parties, namely companies and consumers. Production planning is important in the industry in order to achieve optimal profits. In the rattan handicraft business, furniture faces problems in production planning. The production process is carried out based on the availability of raw materials and the estimated average demand, but it is often difficult to determine the optimal amount and time of production. This results in a shortage or excess of stock which has an impact on profits. By using a linear program, this study aims to determine the optimal results in production planning in the rattan and furniture handicraft business using the simplex method so that optimal profits are obtained. The results showed that the number of products produced was optimal so that the profit obtained was 8.49%.
49
Ayu Utami, Betty Silvia. "Linkage Analysis of Large and Medium Manufacturing Industry Sectors In East Java Province Using Input-Output". Jurnal Dinamika Ekonomi Pembangunan 1, n.º 1 (7 de agosto de 2018): 29–36. http://dx.doi.org/10.33005/jdep.v1i1.67.
Texto completo da fonteResumo:
The purpose of this research is to know and analyze the role and backward linkage and forward linkage of big and medium manufacturing industry in East Java Province. The data used in this study is cross section data, data to measure the linkage of economic sector. While the population of this research is all economic sector in East Java Province, which is divided into 66 economic sectors in accordance with Input-Output analysis (I-O). From the analysis result, it is concluded that the backward linkage condition shows the bamboo, wood and rattan industry sub sector, the non-metallic minerals sub industry, and the cement sub-industry has the greatest value, while from the forward linkage shows that the petroleum refinery industry sub sector, sub industry of goods.
50
Suparman, Suparman, e Endang Ruswanti. "Market Orientation, Product Innovation on Marketing Performance Rattan Industry in Cirebon Indonesia". IOSR Journal of Economics and Finance 08, n.º 01 (janeiro de 2017): 19–25. http://dx.doi.org/10.9790/5933-0801031925.
Texto completo da fonte