Literatura científica selecionada sobre o tema "RAFT/MADIX controlled radical polymerization"

Xanthates have long been described as poor RAFT/MADIX agents for styrene polymerization. Through the determination of chain transfer constants to xanthates, this work demonstrated beneficial capto-dative substituent effects for the leaving group of a new series of α-amido trifluoromethyl xanthates, with the best effect observed with trifluoroacetyl group. The previously observed Z-group activation with a O-trifluoroethyl group compared to the O-ethyl counterpart was quantitatively established with Cex = 2.7 (3–4 fold increase) using the SEC peak resolution method. This study further confirmed the advantageous incorporation of trifluoromethyl substituents to activate xanthates in radical chain transfer processes and contributed to identify the most reactive xanthate reported to date for RAFT/MADIX polymerization of styrene.

The observations and reasoning leading to the discovery of the degenerative transfer of xanthates and related thiocarbonylthio derivatives are briefly described. A few synthetic applications are presented, and the consequences on the emergence of the RAFT and MADIX polymerization technologies as well as some mechanistic aspects are briefly discussed.

Polymerizations of VAc was carried out using AIBN as the initiator and DIP as the MADIX agent precursor. Then, block copolymer PVAc-b-PNVA had been synthesized by RAFT radical polymerization in the presence of PVAc-DIP as macro CTA. The length of blocks could be tuned by changing the molar ratio of NVA and VAc. Block copolymer PVAc-b-PNVA self-assembled into micelles in solution, and underwent microphase separation in bulk state.

The ability to conduct controlled radical polymerizations (CRP) in homogeneous aqueous media is discussed. Three main techniques, namely stable free radical polymerization (SFRP), with an emphasis on nitroxide-mediated polymerization (NMP), atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain transfer polymerization (RAFT) are examined. No examples exist of homogeneous aqueous NMP polymerization, but mixed water/solvent systems are discussed with specific reference to the NMP of sodium 4-styrenesulfonate. Aqueous ATRP is possible, although monomer choice is limited to methacrylates and certain styrenics. Finally, homogeneous aqueous RAFT polymerizations are examined. We demonstrate the greater versatility of this technique, at least in terms of monomer variety, by discussing the controlled polymerization of charged and neutral acrylamido monomers and of a series of ionic styrenic monomers. Many of these monomers cannot/have not been polymerized by either NMP or ATRP.

The degenerative radical addition-transfer of xanthates onto alkenes allows the rapid assembly of richly functionalized structures. Various families of open-chain, cyclic, and polycyclic compounds can thus be readily accessed. Furthermore, the process can be extended to the synthesis or modification of aromatic and heteroaromatic derivatives by exploiting the possibility of using peroxides both as initiators and stoichiometric oxidants. The modification of existing polymers and the controlled synthesis of block polymers by what is now known as the RAFT/MADIX (reversible addition–fragmentation transfer/macromolecular design by interchange of xanthate) process is described briefly.

La connaissance des propriétés physico-chimiques des solutions de polymères utilisées en récupération assistée des hydrocarbures (RAH) est essentielle pour une bonne efficience du procédé. Ces travaux avaient pour but de conforter et enrichir un modèle de viscosité universelle dépendant du paramètre de recouvrement C[η] qui permet de prendre en compte l'occupation du milieu par les chaînes macromoléculaires (concentration d'enchevêtrement critique, C*, régimes dilué et semi-dilué). Les effets des microstructures, de la taille et de la composition des polymères ont été étudiés via la synthèse d'une librairie d'échantillons par polymérisation radicalaire contrôlée (RADT/MADIX) : polyacrylamides, copolymères statistiques et asymétriques acrylamide-acrylate de sodium, polyacrylamides post-hydrolysés. Chaque polymère a été caractérisé par chromatographie d'exclusion stérique et par rhéologie capillaire dont les protocoles et techniques ont été optimisées. Les effets de la microstructure sur les propriétés physico-chimiques dimensionnelles, rhéologiques et complexantes ont été déterminés. Mes travaux de thèse doivent répondre aux deux questions principales suivantes : Quel est l'effet de la microstructure et de la dispersité du polymère sur le modèle ? Quelle(s) est (sont) la(les) limite(s) du modèle en termes d'application ? Mes travaux incluent donc l'élaboration de polymères modèles couvrant une large gamme de masses molaires (de quelques dizaines de milliers à plusieurs millions de g/mol). Les polymères modèles sont de structures variées allant d'homopolymères aux copolymères statistiques et à blocs. Après leur caractérisation complète (composition chimique et structure), les propriétés rhéologiques des solutions sont étudiées. Pour cela, mes travaux comprennent le développement, au sein du laboratoire et spécifiquement pour cette étude, d'un rhéomètre capillaire. Les résultats expérimentaux sont alors comparés au modèle établi pour les polymères industriels pour accroître le potentiel du modèle
The knowledge of the physico-chemical properties of polymer solutions for enhanced oil recovery (EOR) is crucial to optimize the process. The purpose of this work was to consolidate and complete an universal viscosity model depending on C[η] parameter. The later allows taking into account the degree of interpenetration of polymer chains (critical concentration, C*, diluted and semi-diluted solutions). Various polymer parameters have been studied as the effects of microstructures, polymer size (molar mass and dispersity) as well as chemical composition. A library of polymer models was elaborated by controlled radical polymerization (RADT/MADIX). Series of polyacrylamides, statistical and asymmetric copolymers of acrylamide-sodium acrylate and post-hydrolyzed polyacrylamides were synthesized and characterized by steric exclusion chromatography and capillary rheology and the analytical protocols and techniques were optimized. The effects of the microstructure onto dimensional, rheological and complexation physico-chemical properties were determined

Stimuli responsive polymers (SRP) have attracted a lot of attention, due to their potential and promising applications in many fields, as protein-ligand recognition, on-off switches for modulated drug delivery or artificial organs. Poly(N-isopropylacrylamide) (PNIPAM) is one of the most widely studied polymers due to its lower critical solution temperature (LCST) at ~ 32° C in aqueous solution. Additionally, glycopolymers, where free sugar units are present, have potentially interesting applications especially in bio-recognition where sugars play an important role. In this work, our interest was focused on the synthesis of glycomonomers and its block- and random- copolymers with NIPAM. NIPAM homopolymers with an active chain transfer unit at the chain end could be prepared by RAFT. They were used as macro-chain transfer agents to prepare a variety of sugar containing responsive block copolymers from new glycomonomers by the monomer addition concept. The LCSTs of the aqueous solutions of the copolymers are affected strongly by the comonomer content, spacer chain length of the glycomonomer and the chain architecture of the copolymers. These polymers were coated on a solid substrate by spin coating and crosslinked by plasma immobilization. Characterization of the polymers was performed by nuclear magnetic resonance spectroscopy (NMR), ultraviolet (UV), dynamic light scattering (DLS, detection of aggregation behaviour) and gel permeation chromatography (GPC). Polymer films were investigated by ellipsometry, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) regarding their surface properties. Afterwards sulfation of sugar – OH groups was performed in order to obtain heparin like structure, as heparin exhibits numerous important biological activities, like good interaction with diverse proteins. Finally, affinity of the polymers (sulfated and non sulfated form) on a solid support to the endothelial cells was investigated.

Multifunctional monomers on the basis of acryl- and methacryl derivatives were synthesized and different protective groups were used. After polymerization the protective groups were removed by different methods. Various initiators for the NMP of the monomers were synthesized and the reaction conditions were optimized. The results showed that NMP was not a suitable method for multifunctional acryl- and methacryl derivatives to achieve well-defined homopolymers, although it was successful for control of polymerization of styrene and block copolymerization of multifunctional acryl- and methacryl derivatives with alkoxyamine terminated polystyrene. The ATRP of multifunctional acrylates and methacrylates has been successfully performed, as well as the block copolymerization of multifunctional acrylates and methacrylates. Relatively low polydispersities of the corresponding polymers (PD=1.18-1.36) and reasonably high rates of polymerization could be achieved when Me6TREN and PMDETA were used as ligands. However, the ATRP of multifunctional acrylamides and methacrylamides failed. The RAFT-polymerization of styrene, acrylamide and acrylate using BDTB as a CTA and AIBN as an initiator afforded polymers with narrow molecular weight distribution (PD=1.13-1.26). A kinetic investigation and the further synthesis of block copolymers using dithioester-terminated homopolymers as macroCTAs showed that the RAFT polymerization of acrylamide M9b proceeded in a living manner. However, BDTB does not control the reaction of methacrylic monomers, such as methacrylates and methacrylamides. The bulk phase behavior of the block copolymers were examined by means of DSC and the surface behaviors of block copolymers as thin layers were examined with AFM. Two-phase transitions in the block copolymers were observed clearly by DSC, indicative of the appearance of phase separations, which were seen in an AFM image. In conclusion, multifunctional acryl- and methacryl derivatives failed to achieve well-defined homopolymers by NMP. However, this method was successful for block copolymerization of multifunctional acryl- and methacryl derivatives with alkoxyamine terminated polystyrene. Multifunctional acrylates and methacrylates were successfully homopolymerized and block copolymerized by ATRP. Multifunctional acrylates and acrylamides were suitable for homopolymerization and block copolymerization by the RAFT process. Thus far, it is difficult to homopolymerize multifunctional methacrylamides in controlled way.

Thesis (Ph. D.)--Chemical and Biomolecular Engineering, Georgia Institute of Technology, 2006.
Jones, Christopher, Committee Chair ; Schork, F. Joseph, Committee Co-Chair ; Weck, Marcus, Committee Member ; Meredith, Carson, Committee Member ; Agrawal, Pradeep, Committee Member.

Reversible addition-fragmentation transfer (RAFT) was used as a controlling technique for studying the aqueous heterophase polymerization. The polymerization rates obtained by calorimetric investigation of ab initio emulsion polymerization of styrene revealed the strong influence of the type and combination of the RAFT agent and initiator on the polymerization rate and its profile. The studies in all-glass reactors on the evolution of the characteristic data such as average molecular weight, molecular weight distribution, and average particle size during the polymerization revealed the importance of the peculiarities of the heterophase system such as compartmentalization, swelling, and phase transfer. These results illustrated the important role of the water solubility of the initiator in determining the main loci of polymerization and the crucial role of the hydrophobicity of the RAFT agent for efficient transportation to the polymer particles. For an optimum control during ab-initio batch heterophase polymerization of styrene with RAFT, the RAFT agent must have certain hydrophilicity and the initiator must be water soluble in order to minimize reactions in the monomer phase. An analytical method was developed for the quantitative measurements of the sorption of the RAFT agents to the polymer particles based on the absorption of the visible light by the RAFT agent. Polymer nanoparticles, temperature, and stirring were employed to simulate the conditions of a typical aqueous heterophase polymerization system. The results confirmed the role of the hydrophilicity of the RAFT agent on the effectiveness of the control due to its fast transportation to the polymer particles during the initial period of polymerization after particle nucleation. As the presence of the polymer particles were essential for the transportation of the RAFT agents into the polymer dispersion, it was concluded that in an ab initio emulsion polymerization the transport of the hydrophobic RAFT agent only takes place after the nucleation and formation of the polymer particles. While the polymerization proceeds and the particles grow the rate of the transportation of the RAFT agent increases with conversion until the free monomer phase disappears.

The degradation of the RAFT agent by addition of KPS initiator revealed unambigueous evidence on the mechanism of entry in heterophase polymerization. These results showed that even extremely hydrophilic primary radicals, such as sulfate ion radical stemming from the KPS initiator, can enter the polymer particles without necessarily having propagated and reached a certain chain length. Moreover, these results recommend the employment of azo-initiators instead of persulfates for the application in seeded heterophase polymerization with RAFT agents.

The significant slower rate of transportation of the RAFT agent to the polymer particles when its solvent (styrene) was replaced with a more hydrophilic monomer (methyl methacrylate) lead to the conclusion that a complicated cooperative and competitive interplay of solubility parameters and interaction parameter with the particles exist, determining an effective transportation of the organic molecules to the polymer particles through the aqueous phase. The choice of proper solutions of even the most hydrophobic organic molecules can provide the opportunity of their sorption into the polymer particles. Examples to support this idea were given by loading the extremely stiff fluorescent molecule, pentacene, and very hydrophobic dye, Sudan IV, into the polymer particles.

Finally, the first application of RAFT at room temperature heterophase polymerization is reported. The results show that the RAFT process is effective at ambient temperature; however, the rate of fragmentation is significantly slower. The elevation of the reaction temperature in the presence of the RAFT agent resulted in faster polymerization and higher molar mass, suggesting that the fragmentation rate coefficient and its dependence on the temperature is responsible for the observed retardation.
Um neue Materialien mit außergewöhnlichen Eigenschaften zu erstellen, muss man in der Lage sein, die Struktur der Moleküle zu kontrollieren, aus denen die Materialien bestehen. Für das Maßschneidern solcher neuer Eigenschaften besitzen Polymere ein großes Potenzial: Dies sind sehr lange Moleküle, die aus einer großen Zahl von kleineren Einheiten aufgebaut sind. Proteine und DNS sind Beispiele für natürliche Polymere; Plastik und Gummi sind Beispiele für künstliche Polymere. Letztere werden üblicherweise durch das Zusammenfügen einer Reihe von kleineren Molekülen, den Monomeren, hergestellt. Schon lange versuchen Wissenschaftler, die Anordnung, Anzahl und Art dieser Monomere zu kontrollieren, die sich in der Struktur der Polymermoleküle widerspiegeln. Die gebräuchlichste Methode zur kommerziellen Produktion von Polymeren ist die so genannte freie radikalische Polymerisation. Die Strukturkontrolle durch diese Methode ist jedoch relativ schwierig und wurde maßgeblich erst im letzten Jahrzehnt entwickelt. Trotz der Existenz einiger effektiver Kontrollmethoden ist ihre industrielle Anwendung bislang sehr beschränkt, weil sie nicht für die Emulsionspolymerisation verwendbar sind. Die Emulsionspolymerisation ist die gängigste Technik in der industriellen Produktion von Polymeren. Es handelt sich dabei um ein vergleichsweise umweltfreundliches Verfahren, denn es werden keine organischen Lösungsmittel verwendet. Stattdessen dient Wasser als Lösungsmittel, in dem die Polymere in Form von kleinen, fein verteilten Partikeln vorliegen. In der Natur kommt dieses Prinzip beispielsweise in Pflanzen bei der Bildung von Kautschuk - allgemein als Latex bezeichnet - vor. Schließlich ist die Emulsionspolymerisation einfach durchzuführen: Das Produkt ist in vielen Fällen gebrauchsfertig, und es gibt viele technische Vorteile im Vergleich zu anderen Herstellungsprozessen.

Doch bevor die Probleme beim Einsatz von Kontrollmethoden in der Emulsionspolymerisation gelöst werden können, müssen erst ihre Ursachen geklärt werden. Dies ist eine unverzichtbare Vorraussetzung zum Übertragen von Forschungsergebnissen auf das tägliche Leben.

Ziel dieser Arbeit ist die Untersuchung der Probleme, die für die kontrollierte radikalische Polymerisation in Emulsion von Bedeutung sind. Die wichtigste Fragestellung in der Emulsionspolymerisation zielt auf die Löslichkeit der Reaktionskomponenten in den verschiedenen Phasen, wie z.B. in Wasser oder in den Polymerpartikeln. Die Kontrollmethode der Wahl für diese Arbeit ist "Reversibler Additions-Fragmentierungs Transfer" (RAFT). Die RAFT-Methode ist die modernste Kontrollmethode, und sie ist für viele Reaktionsbedingungen und viele Arten von Monomeren anwendbar.

Thesis (MSc)--Stellenbosch University, 2001.
ENGLISH ABSTRACT: A novel approach to conducting controlled free radical polymerization in aqueous systems using Reversible Addition-Fragmentation Chain Transfer (RAFT) has been studied. When conducting RAFT in aqueous systems, reaction conditions must be chosen such that monomer transport across the aqueous-phase is either eliminated or facilitated. This is to prevent the formation of the red layer associated with RAFT in emulsions. The formation of the red layer is ascribed to the inability of waterinsoluble, dithiobenzoate-endcapped oligomers to be sufficiently transported across the aqueous phase. The novel approach in this study focussed on eliminating monomer transport and comprises two fundamental steps: the synthesis of dithiobenzoate-encapped oligomers in bulk followed by miniemulsification of these oligomers to yield a polymerizable miniemulsion. Dithioesters that act as chain transfer agents in the RAFT -process were synthesized in situ, thereby eliminating laborious and time-consuming organic purification procedures of dithioesters. In situ formation of the RAFT-agents involved conducting the reaction between di(thiobenzoyl) disulfide and conventional azo-initiators of differing structures in the presence of monomer. The structure of the chosen azo-initiator played a role in the efficiency of the RAFT process when the reaction was conducted in the presence of monomer to control the free radical polymerization process. Synthesis of the oligomers was performed by heating di(thiobenzoyl) disulfide and a selected azo-initiator, in the presence of monomer for a specific reaction duration in bulk. After the reaction was stopped, these oligomers were then miniemulsified by adding water, surfactant and cosurfactant, followed by the application of shear to form the resulting mini emulsion. The free radical polymerization of the dithiobenzoate-endcapped oligomers in the miniemulsion proceeded in a controlled manner with molecular weight increasing in a linear fashion with increasing conversion, while polydispersities remained low. The familiar red layer formation associated with RAFT polymerization in conventional emulsions was not observed under these conditions. The effects of changing the cosurfactant (hydrophobe) as well as changing the degree of polymerization of the emulsified oligomers were also investigated and described.
AFRIKAANSE OPSOMMING: Hierdie studie is geloods om 'n nuwe benadering tot die beheerde vry-radikaal polimerisasie in water gebaseerde sisteme te ondersoek. Daar is spesifiek gekyk na die uitvoer van die RAFT (Reversible Addition-Fragmentation Chain Transfer) proses in emulsies. Wanneer RAFT in emulsies toegepas word, moet die toestande waaronder die reaksie uitgevoer word, versigtig opgestel word. Die toestande moet so gekies word dat die vervoer van monomere deur die waterfase óf geëlimineer word óf gefasiliteer word. Dit word gedoen om die faseskeiding in die vorm van 'n rooi laag, wat so kenmerkend van RAFT -polimerisasie in emulsies is, te voorkom. Hierdie faseskeiding vind plaas omdat die vervoer van ditiobensoaat endgroep-bevattende oligomere deur die waterfase tydens interval II, moeilik is a.g.v. hulle oplosbaarheid in water. Die nuwe benadering wat hier bestudeer is, het twee basiese stappe. Eerstens word die ditiobensoaat endgroep-bevattende oligomere in bulk gesintetiseer. Dit word gevolg deur die emulsifisering van die oligomere. Hierna vind verdere polimerisasie van die oligomere plaas deur die dormante oligomere te heraktiveer. Die ditio-esters wat as kettingoordrag agente optree in die RAFT proses, word in situ gesintetiseer. Hierdie modifikasie sny tydrowende organiese suiweringsmetodes uit. Die in situ RAFT agente word gesintetiseer deur di(tiobensoïel) disulfied met verskillende konvensionele azo-inisieerders te laat reageer. Die struktuur van die spesifieke azoinisieerder het wel 'n rol gespeel in die effektiwiteit van die RAFT proses om molekulêre massa te beheer as bg. reaksie in die teenwoordigheid van monomere uitgevoer is. Die sintese van die oligomere is gedoen deur di(tiobensoïel) en 'n azo-inisieerder te verhit in die teenwoordigheid van monomere. Die reaksie is gedoen in bulk en die graad van polimerisasie van die oligomere is beheer deur die reaksie te stop by verskillende tydstippe. Nadat die bulk reaksie gestop is, is hierdie oligomere ge-emulsifiseer deur die oligomere te meng met 'n seep, hidrofoob en water. Hierdie mengsel word dan onderwerp aan 'n vermengingskrag om 'n polimeriseerbare mini-emulsie te vorm. Die voortsetting van die polimerisasie van die oligomere in die mini-emulsie het op 'n beheerde wyse verloop, m.a.w. molekulêre massa wat linieêr toeneem met stygende omsetting. Polidispersiteit indekse van die polimere het deurentyd laag gebly in die stabielste sisteme. Onder hierdie toestande was daar geen kenmerkende rooi laagvorming te bespeur nie. Die effekte wat die verandering van die hidrofoob, asook die verandering van die graad van polimerisasie van die oligomere op die sisteem gehad het, is onder andere ook ondersoek en beskryf.

L'objectif de ce travail de thèse est de préparer des latex nanocomposites à base d’argile, la Laponite RD, en émulsion aqueuse, à l'aide de la polymérisation radicalaire contrôlée par transfert de chaîne réversible par addition-fragmentation (RAFT). Les plaquettes de Laponite ont été choisies comme charge inorganique surtout pour leur anisotropie de forme, ce qui pourrait permettre l’elaboration de films nanostructurés, mais aussi pour leurs propriétés thermiques et mécaniques, leur pureté chimique élevée et la distribution uniforme en taille des plaquettes. Des polymères hydrophiles (macroRAFT) à base de polyéthylène glycol (PEG), d’acide acrylique (AA) ou de méthacrylate de N,N- diméthylaminoéthyle (DMAEMA) et comportant des unités hydrophobes d’acrylate de n-butyle (ABu) (dans certains cas) et un groupe trithiocarbonate terminal, ont été tout d'abord synthétisés. Ensuite, l'interaction entre les macroRAFTs et l’argile a été étudiée à travers le tracé des isothermes d'adsorption. En agissant comme des agents de couplage et des stabilisants, ces macroRAFTs ont eté utilisés dans la copolymérisation en émulsion du (méth)acrylate de méthyle et de l’ABu en mode semi-continu en presence d’argile. Des particules de latex hybrides de différentes morphologies ont été obtenues et les morphologies ont été reliées à la nature et à la concentration de l’agent macroRAFT, au pH de la dispersion macroRAFT/Laponite, à la température de transition vitreuse du copolymère final (fonction de la composition du mélange de monomères hydrophobes) et aux conditions de polymérisation. Les analyses par cryo-MET indiquent des plaquettes de Laponite décorées par des particules de polymère (plusieurs particules de latex en surface des plaquettes d'argile), des particules ‘haltère’, janus, ‘carapace’ (particules de latex décorées en surface par les plaquettes de Laponite) ou encore des particules multi-encapsulées (plusieurs plaquettes encapsulées dans chaque particule de latex). Les propriétés mécaniques des films de polymère/Laponite ont été étudiées par spectrométrie mécanique dynamique et corrélées à la morphologie des particules et à la microstructure des films
The aim of this work is to prepare Laponite RD-based nanocomposite latexes by aqueous emulsion polymerization, using the reversible addition-fragmentation chain transfer (RAFT) polymerization. Laponite platelets were selected as the inorganic filler due, especially, to their anisotropic shape, which allows the production of nanostructured films, but also for their thermal and mechanical properties, their high chemical purity and the uniform dispersity of the platelets. Hydrophilic polymers (macroRAFT) composed of poly(ethylene glycol) (PEG), acrylic acid (AA) or N,N-dimethylaminoethyl methacrylate (DMAEMA) and comprising hydrophobic n-butyl acrylate (BA) units (in some cases) and trithiocarbonate terminal group were initially synthesized. Then, the interaction between the macroRAFTs and the clay was studied through the plot of adsorption isotherms. By acting as coupling agents and stabilizers, the macroRAFT agents were used in the emulsion copolymerization of methyl (meth)acrylate and BA by semi-continuous process in the presence of the clay. Hybrid latex particles with different morphologies were obtained and the results were associated to the nature and concentration of the RAFT (co)polymers, to the pH of the macroRAFT/Laponite dispersion, the glass transition temperature of the final copolymer (function of the composition of the hydrophobic monomers mixture) and to the polymerization conditions. The cryo-TEM images indicate the formation of polymerdecorated Laponite platelets (several latex particles located at the surface of the platelets), dumbbell-like, janus, Laponite-decorated (armored) latex particles, and multiple encapsulated particles (several platelets inside each latex particle). The mechanical properties of polymer/Laponite films were studied by dynamic mechanical analysis and correlated with the particles morphology and the films microstructure
Este trabalho de tese tem como objetivo a preparação de látices nanocompósitos à base da argila Laponita RD em emulsão aquosa, via polimerização radicalar controlada por transferência de cadeia via adição-fragmentação reversível (RAFT). A Laponita foi escolhida como carga inorgânica devido principalmente à forma anisotrópica de suas lamelas, o que permite a elaboração de filmes nanoestruturados, mas também por suas propriedades térmicas e mecânicas, por sua alta pureza química e pela distribuição uniforme, em termos de tamanho, de suas partículas. Inicialmente, polímeros hidrofílicos (macroRAFT) à base de poli(etileno glicol) (PEG), de ácido acrílico (AA) ou de metacrilato de N,N-dimetilaminoetila (DMAEMA) que contêm unidades hidrofóbicas de acrilato de nbutila (ABu) (em alguns casos) e um grupo tritiocarbonílico terminal foram sintetizados. Em seguida, a interação entre os macroagentes de controle (macroRAFTs) e a argila foi estudada através de isotermas de adsorção. Atuando como agentes de acoplamento e estabilizantes, esses macroRAFTs foram então utilizados na copolimerização em emulsão do (met)acrilato de metila e do ABu em processo semicontínuo na presença da argila Laponita. Partículas de látex híbrido de diferentes morfologias foram obtidas e os resultados foram correlacionados à natureza e à concentração dos macroRAFTs, ao pH da dispersão macroRAFT/Laponita, à temperatura de transição vítrea do copolímero final (função da composição da mistura de monômeros hidrofóbicos) e às condições de polimerização. As análises de cryo-TEM indicam a formação de lamelas de Laponita decoradas com partículas de polímero (várias partículas de látex localizadas na superfície das lamelas), de partículas do tipo dumbbell, janus, blindadas (partículas de látex decoradas com lamelas de argila em sua superfície) ou ainda de partículas multiencapsuladas (diversas lamelas encapsuladas dentro de uma única partícula de látex). As propriedades mecânicas dos filmes de polímero/Laponita foram estudadas por análise dinâmico-mecânica e correlacionadas à morfologia das partículas e à microestrutura dos filmes

Bottlebrush polymers are interesting topologies that have become increasingly relevant in various applications including rheology modifiers, super-soft elastomers, photonic crystals, anti-fouling coatings, the in vivo delivery of therapeutic agents, and as promising substrates in lithographic printing. These macromolecules are comprised of numerous polymeric side-chains densely grafted to a polymer backbone. The densely grafted nature of bottlebrush polymers results in steric repulsion between neighboring polymer chains, forcing these macromolecules to adopt a chain-extended conformation. Although these remarkable macromolecules have a many different applications, the transformative potential of the bottlebrush polymer topology has not been realized because the synthesis of high molecular weight bottlebrush polymers is challenging. This dissertation focusses on improving the synthesis of these large macromolecules using the grafting-through strategy in the first section and the transfer-to strategy in the second section. For the first time the effect of anchor group chemistry—the configuration of atoms linking the polymer to a polymerizable norbornene—was studied on the kinetics of ring-opening metathesis polymerization (ROMP) of macromonomers (MMs) initiated by Grubbs 3rd generation catalyst. A variance in the rate of propagation of >4-fold between similar MMs with different anchor groups was observed. This phenomenon was conserved across all MMs tested, regardless of solvent, molecular weight (MW), or repeat unit identity. Experimental and computational studies indicated that the rate differences likely resulted from a combination of varying steric demands and electronic structure among the different anchor groups. This new insight will allow others to achieve high MM conversion and prepare pure, high MW bottlebrush polymers by ROMP grafting-through. The second section of this dissertation deals with a little studied bottlebrush synthesis technique called the transfer-to method. This method is a hybrid of the grafting-from and grafting-to approaches in which the growing polymer side chains detach from the backbone, propagate freely in solution, and then reattach to the backbone in a chain transfer step. Several parameters were investigated to determine optimal conditions for this process. This study provides for the first time a guide to use the transfer-to method to produce high purity bottlebrush polymers with controllable backbone and side chain length.
Ph. D.

Abstract Non-aqueous fluids (NAF) are considered as efficient and reliable drilling fluid systems for challenging wellbore conditions, such as high-temperature drilling operations. NAFs require fluid loss control additives to reduce filtration loss into the formation with minimum filter cake thickness. Polymer developed in this work demonstrated exceptional properties such as high dispersibility, good thermal stability and low plastic viscosity, when compared with traditional natural and synthetic-based fluid loss control additives (e.g., gilsonite). We have utilized a synthetic molecular optimization process to precisely adjust the hydrophilic-lyophilic balance (HLB) by altering the ratio of hydrophilic to hydrophobic monomers. This has allowed us to achieve an HLB that facilitates easy dispersion within NAF formulations. The star polymer was produced using a controlled/radical polymerization technique called Reversible Addition Fragmentation Chain Transfer polymerization (RAFT). The properties of the NAFs, such as rheology, fluid loss, mud cake thickness, and emulsion stability, were evaluated and compared with commercially available fluid loss control additives under simulated downhole pressure and temperature conditions. The chemical structure and thermal stability of the star polymer were analyzed using spectroscopy and thermogravimetric analysis. The spectroscopic studies confirmed the formation of desired polymeric structures and the molecular weight desired. Star-polymer synthesized herein has excellent thermal stability up to 450 °F with great fluid loss control and ultrathin filter cake for NAF systems for mud weight ranging from 10 to 17 lbm/gal. The star polymer also improves emulsion stability. Plastic viscosity (PV) is usually increased with the addition of commercially available fluid loss control additives; however, star-polymer had a negligible effect on PV. Results for both diesel and mineral oil-based mud systems will be presented. High-temperature high-pressure viscometer (Fann 77) was used to study rheological properties at up to 350 °F and 10,000 psi. Our recent work has resulted in the creation of a cutting-edge star polymer (NSP) for use in the industry's next-gen high-performance fluid loss additives. The polymer network can be efficiently synthesized and scaled up for commercial production, providing engineers with an improved solution for drilling high-temperature wells (up to 350°F) with reduced plastic viscosity and increased emulsion stability, while also providing excellent fluid loss control.