Literatura científica selecionada sobre o tema "Printing method"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Printing method".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Printing method"
Phillips, Michael. "“Printing in the infernal method”: William Blake’s method of “Illuminated Printing”". Interfaces, n.º 39 (1 de julho de 2018): 67–89. http://dx.doi.org/10.4000/interfaces.489.
Texto completo da fonteChen, Ni, Qiang Wang, Ping Yang e Jun Long Xu. "Research on the Evaluation of Digital Prints Quality Based on Noise". Applied Mechanics and Materials 731 (janeiro de 2015): 222–27. http://dx.doi.org/10.4028/www.scientific.net/amm.731.222.
Texto completo da fontePeng Liu, Peng Liu, Ning Zhao Ning Zhao, Linghui Ren Linghui Ren e Qianqian Xu Qianqian Xu. "Color restoration method of printing in machine visual detection". Chinese Optics Letters 12, s1 (2014): S11501–311506. http://dx.doi.org/10.3788/col201412.s11501.
Texto completo da fonteYang, Minhua, Xin-guang Lv, Xiao-jie Liu e Jia-qing Zhang. "Research on color 3D printing based on color adherence". Rapid Prototyping Journal 24, n.º 1 (2 de janeiro de 2018): 37–45. http://dx.doi.org/10.1108/rpj-07-2016-0112.
Texto completo da fonteShen, Xiaoqiang, Zhiheng Yu, Fengli Huang, Jinmei Gu e Hui Zhang. "Fabrication of 3D microstructures for flexible pressure sensors based on direct-writing printing". AIP Advances 12, n.º 10 (1 de outubro de 2022): 105205. http://dx.doi.org/10.1063/5.0107003.
Texto completo da fonteVaganov, A. V., S. S. Shemelyunas, A. A. Shvedunenko e A. M. Makarov. "3D PRINTING TIME REDUCTION METHOD". Izvestia Volgograd State Technical University, n.º 3 (2022): 47–49. http://dx.doi.org/10.35211/1990-5297-2022-3-262-47-49.
Texto completo da fontePhillips, Michael. ""Printing in the Infernal Method"". Interfaces 30, n.º 1 (2010): 21–34. http://dx.doi.org/10.3406/inter.2010.1369.
Texto completo da fontePhung, Thanh-Huy. "An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed". NIP & Digital Fabrication Conference 33, n.º 1 (1 de novembro de 2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.126.
Texto completo da fontePhung, Thanh-Huy. "An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed". NIP & Digital Fabrication Conference 33, n.º 1 (1 de novembro de 2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.1.art00030_1.
Texto completo da fonteJi, Wen Ge, Hua Wu, Jing Shen e Mei Feng Wang. "A Novel and Efficient Method for Digital Printing". Applied Mechanics and Materials 404 (setembro de 2013): 668–71. http://dx.doi.org/10.4028/www.scientific.net/amm.404.668.
Texto completo da fonteTeses / dissertações sobre o assunto "Printing method"
Kanani, Chirantan. "Cell Printing: A novel method to seed cells onto biological scaffolds". Digital WPI, 2012. https://digitalcommons.wpi.edu/etd-theses/332.
Texto completo da fonteHoleman, Tara. "The Systematic Approach to Microplotter Printing of Perovskite Precursors". Ohio University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1534795066623052.
Texto completo da fonteBishop, Craig, Ian Armstrong e Rolando Navarette. "A Novel Method for 3D Printing High Conductivity Alloys for UHF Applications". International Foundation for Telemetering, 2014. http://hdl.handle.net/10150/577400.
Texto completo da fonteTraditional approaches to constructing 3D structural electronics with conductive and dielectric materials include ink-jet printed, silver-bearing ink and fine copper wire meshes. One approach combines stereo-lithographic 3D-printed photo-polymers with direct-printed silver-bearing conductive inks. Results have shown 3D conductive structures with conductivities in the range 2x10⁶ to 1x10⁷ S/m using annealing temperatures ranging from 110°C to 150°C for 10 to 15 minutes. However, the stereo-lithographic approach suffers from the high cost of the printer and structural deformation during annealing. This paper presents a new method for 3d printing high conductivity metal alloys using consumer-grade 3D printer. The design and construction of the necessary modification will be presented in addition to the new 3D design process. The method yields metal structures with expected conductivities exceeding 2.6x10⁶ S/m. The process is performed without an annealing step, so the polymeric structural material is not exposed to high temperatures for any prolonged time. A UHF ISM band antenna is constructed for an RFID application using this method, the antenna performance is measured, and the results are compared simulations in Ansys HFSS. This new method can reduce total cost, and several low melting-point alloys could raise the conductivity.
Latanision, Ivan M. "A comparison between the staggered position one-angle screening and the multi-angle screening method in terms of misregistration when printing process color on newsprint /". Online version of thesis, 1992. http://hdl.handle.net/1850/11251.
Texto completo da fonteFuller, Sawyer Buckminster 1977. "A fast flexible ink-jet printing method for patterning networks of neurons in culture". Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89393.
Texto completo da fonteOttesen, Vegar. "Bacterial Microarrays by Microcontact Printing : Development of a Method for Immobilizing Live Bacteria on Microarrays". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for fysikk, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26120.
Texto completo da fonteMcMaster, Rebecca J. "A simple method towards 3D-printing and crosslinking partially hydrolysed poly(2-ethyl-2-oxazoline)". Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/109910/1/Rebecca_McMaster_Thesis.pdf.
Texto completo da fonteYuan, Kaiwen. "A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator". Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54008.
Texto completo da fonteApplied Science, Faculty of
Mechanical Engineering, Department of
Graduate
Özkol, Emre [Verfasser]. "Evaluation of the direct inkjet printing method for the fabrication of three-dimensional ceramic components / Emre Özkol". Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2012. http://d-nb.info/1027765947/34.
Texto completo da fonteAl-Khudary, Nadine. "Material thermal conductivity measurement by the 3-omega method : application to polymers characterization using inkjet printing technology". Thesis, Lille 1, 2014. http://www.theses.fr/2014LIL10135/document.
Texto completo da fonteThe characterization of polymers is gaining a great attention as they are one of the main constituents of future flexible or organic electronics. Given the fact that thermal management is an important issue in the frame work of flexible electronics, the knowledge of the thermal conductivity of polymer materials is needed. In this work, we propose the measurement of polymer material thermal conductivity using the three omega method. This method requires heating a metallic line conductor placed on the surface of the material under test by an alternating current source. The first measurements were done on polydimethyl siloxane (PDMS) polymer material for which a special procedure that consists in embedding the metallic line conductors near the surface has been applied.In addition to the well-known limitations of photolithography process which are the cost and the process duration, a particular concern lies in the fabrication of the metallic conductors by such process which might be destructive in case of polymer materials. Consequently, we propose an alternative method for this kind of materials based on inkjet printing technology. The thermal conductivities of polyimide and polyetherether ketone have been successfully measured using the three omega method combined with inkjet printing technology for sample preparation. Numerical simulations using finite element method (FEM) are also performed. Finally, experimental measurements are compared to Cahill’s analytical solution and FEM modelling. The overall results demonstrate that the inkjet printing technology is a good candidate for the characterization of flexible materials in terms of thermal conductivity
Livros sobre o assunto "Printing method"
Clifton, Merritt. The Samisdat method: A do-it-yourself guide to printing. 4a ed. Rensselaer, New York: Factsheet Five, 1990.
Encontre o texto completo da fonteEskola, Taneli. Polymer photogravure: A new method for photographers and graphic artists. Helsinki: University of Art and Design Helsinki, 1996.
Encontre o texto completo da fonteMcBride, James. A method of selecting final colours for reproduction on ceramic tiles by screen-printing. London: LCP, 2002.
Encontre o texto completo da fonteCho, Hyŏng-jin. "Chikchi" pogwŏn yŏn'gu: Koryŏ sidae millap chujobŏp kŭmsok hwalcha inswaesul = A study on restoration of Jikji : metal typography of wax casting method in Korye dynasty. 8a ed. Kyŏnggi-do P'aju-si: Han'guk Haksul Chŏngbo, 2019.
Encontre o texto completo da fonteRowlatt, K. Reprographic Methods. Essex, England: Longman Publishing Group, 1986.
Encontre o texto completo da fontePoulter, S. R. C. Developments in flexographic methods for newspaper printing. Leatherhead: Pira, Printing and Information Technology Division, 1985.
Encontre o texto completo da fonte1943-, Kipphan Helmut, ed. Handbook of print media: Technologies and production methods. Berlin: Springer, 2001.
Encontre o texto completo da fonteRuggles, Philip Kent. Printing estimating: Costing methods for digital and traditional graphic imaging. 4a ed. Albany: Delmar Publishers, 1996.
Encontre o texto completo da fonteWhite, Jessica. Letterpress now: A DIY guide to new & old printing methods. Asheville: Lark Crafts, an imprint of Sterling Publishing Co., Inc., 2012.
Encontre o texto completo da fonteClem, John C. Prepress for digital printing: An introduction to prepress methods for the digital age. Baldwin, KS: Trio Publications, 2003.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Printing method"
de Witte, Dennis. "Printing method". In Clay Printing, 111–27. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37161-6_8.
Texto completo da fonteYin, Zhouping, YongAn Huang, Yongqing Duan e Haitao Zhang. "Control Method for EHD Printing". In Electrohydrodynamic Direct-Writing for Flexible Electronic Manufacturing, 133–56. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4759-6_6.
Texto completo da fonteWan, Qian, Li Wang e Guowei Ma. "Adaptable Tool-Path Planning Method for 3D Concrete Printing Based on the Mapping Method". In Proceedings of the 2020 DigitalFUTURES, 255–64. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4400-6_24.
Texto completo da fonteZeitlyn, Jonathan. "1. Choices of Printing Method; Design Ideas". In Low Cost Printing for Development, 7–18. Rugby, Warwickshire, United Kingdom: Practical Action Publishing, 1989. http://dx.doi.org/10.3362/9781780445342.001.
Texto completo da fonteMarchment, Taylor, e Jay Sanjayan. "Penetration Reinforcing Method for 3D Concrete Printing". In RILEM Bookseries, 680–90. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49916-7_68.
Texto completo da fontePang, Yechi, Zhuangzhi Ye e Zhijie Li. "Gravable Printing Plate Surface Defect Intelligent Detection Method". In Advances in Graphic Communication, Printing and Packaging, 569–79. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_78.
Texto completo da fonteLi, Yulong, Chengxin Li, Danfeng Jiang, Feng Liu, Xiajie Liu e Li Li. "Preparation and Shielding Performance of Gamma Ray Shielding Composite Materials Based on 3D Printing Technology". In Springer Proceedings in Physics, 596–608. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_52.
Texto completo da fonteChen, Jiahui, Jinda Zhu, Zhiying Qin, Yuejing Zhao, Fuxiang Zhang e Fengshan Huang. "Digital Twin Fault Diagnosis Method for Complex Equipment Transmission Device". In Innovative Technologies for Printing and Packaging, 412–19. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9024-3_51.
Texto completo da fonteZhang, Zhuoran, Qiang Wang e Weiyan Zhang. "Research on Evaluation Method of Scanner Imaging Quality". In Advances in Graphic Communication, Printing and Packaging, 301–8. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_41.
Texto completo da fonteShi, Keqiang, Shanhui Liu, Zengqiang Zhang, Song Qian e Han Zhang. "Modeling Method of Guide Roller Manufacturing Information Based on Ontology Modeling". In Innovative Technologies for Printing and Packaging, 420–24. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9024-3_52.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Printing method"
Nagato, Hitoshi, e Tadayoshi Ohno. "Bidirectional printing method for a thermal ink transfer printer". In Printing Technologies for Images, Gray Scale, and Color, editado por Derek B. Dove, Takao Abe e Joachim L. Heinzl. SPIE, 1991. http://dx.doi.org/10.1117/12.46338.
Texto completo da fonteShi-hui, Wang, Wang Yi-ming e Wu Shu-qin. "Research on printing registration recognition method". In 2017 3rd IEEE International Conference on Computer and Communications (ICCC). IEEE, 2017. http://dx.doi.org/10.1109/compcomm.2017.8322917.
Texto completo da fonteAli, Md Hazrat, Gaziz Yerbolat e Shynggys Amangeldi. "Material Optimization Method in 3D Printing". In 2018 IEEE International Conference on Advanced Manufacturing (ICAM). IEEE, 2018. http://dx.doi.org/10.1109/amcon.2018.8614886.
Texto completo da fonteHendriko, Hendriko, Prayoga Bagaskara e Dimas Permana. "Development of An Automatic Cup Printing Machine Using a Screen Printing Method". In Proceedings of the 11th International Applied Business and Engineering Conference, ABEC 2023, September 21st, 2023, Bengkalis, Riau, Indonesia. EAI, 2024. http://dx.doi.org/10.4108/eai.21-9-2023.2342890.
Texto completo da fonteInui, Tetsuya, Junji Hirokane, Kenji Ohta, Hideyoshi Yamaoka e Toshio Ishikawa. "Magneto-Optical Disk By Contact Printing Method". In OE/LASE '89, editado por Gordon R. Knight e Clark N. Kurtz. SPIE, 1989. http://dx.doi.org/10.1117/12.952763.
Texto completo da fonteFuruta, Atsuhiro, Kazuki Honjo e Jun Taniguchi. "Fabrication of Flexible Interposer Using Printing Method". In JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/lemp2020-8524.
Texto completo da fonteMoscicki, Andrzej, Tomasz Falat, Anita Smolarek, Andrzej Kinart, Jan Felba e Janusz Borecki. "Interconnection process by ink jet printing method". In 2012 IEEE 12th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2012. http://dx.doi.org/10.1109/nano.2012.6322108.
Texto completo da fonteBo Li, Junbiao Liu, Zhiping Wang e Guangrong Fang. "Graphic printing method for New Braille Printer". In 2010 IEEE Youth Conference on Information, Computing and Telecommunications (YC-ICT). IEEE, 2010. http://dx.doi.org/10.1109/ycict.2010.5713067.
Texto completo da fonteKaplan, Daphna, e Yoav Sterman. "Buildup: FDM Method for Printing Textural Surfaces". In SCF '23: Symposium on Computational Fabrication. New York, NY, USA: ACM, 2023. http://dx.doi.org/10.1145/3623263.3629156.
Texto completo da fonteInui, Tetsuya, Junji Hirokane, Kenji Ohta, Hideyoshi Yamaoka e Toshio Ishikawa. "Magneto-Optical Disk by Contact Printing Method". In Optical Data Storage. Washington, D.C.: Optica Publishing Group, 1989. http://dx.doi.org/10.1364/ods.1989.wd3.
Texto completo da fonteRelatórios de organizações sobre o assunto "Printing method"
Martens, Niles. The paper stencil method of silk screen printing. Portland State University Library, janeiro de 2000. http://dx.doi.org/10.15760/etd.701.
Texto completo da fonteHerriot, R., T. Hastings e H. Lewis. Internet Printing Protocol (IPP): The 'ippget' Delivery Method for Event Notifications. RFC Editor, março de 2005. http://dx.doi.org/10.17487/rfc3996.
Texto completo da fonteStrauss, Bernhard, Britta Kleinsorge e Pantea Lotfian. 3D printing technologies in the food system for food production and packaging. Food Standards Agency, março de 2023. http://dx.doi.org/10.46756/sci.fsa.suv860.
Texto completo da fonteKennedy, Alan, Mark Ballentine, Andrew McQueen, Christopher Griggs, Arit Das e Michael Bortner. Environmental applications of 3D printing polymer composites for dredging operations. Engineer Research and Development Center (U.S.), janeiro de 2021. http://dx.doi.org/10.21079/11681/39341.
Texto completo da fonteWijaya, Ignasius P. A., Eric Kreiger e Asuf Masud. An elastic-inelastic model and embedded bounce-back control for layered printing with cementitious materials. Engineer Research and Development Center (U.S.), janeiro de 2024. http://dx.doi.org/10.21079/11681/48091.
Texto completo da fonteOvalle, Samuel, E. Viamontes e Tony Thomas. Optimization of DLP 3D Printed Ceramic Parts. Florida International University, outubro de 2021. http://dx.doi.org/10.25148/mmeurs.009776.
Texto completo da fonteLozynskyi, Maryan. Main Features of Publishing Activities of the Ivan Franko National University of Lviv (end of the 1990s – first two decades of the 21st c.). Ivan Franko National University of Lviv, fevereiro de 2022. http://dx.doi.org/10.30970/vjo.2022.51.11392.
Texto completo da fonteDuan, Mengjie, Li Liu, Guillaume Da e Evelyne Géhin. ASSESSING THE RELATIVE IMPORTANCE OF MUCOSAL EXPOSURE AND INHALATION EXPOSURE TO AIRBORNE PARTICLES. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541653952.
Texto completo da fonteBallentine, Mark, Alan Kennedy, Nicholas Melby, Andrew McQueen, Christopher Griggs e Ashley Kimble. Approach for on-site, on-demand contaminant-removal devices enabled by low-cost 3D printing. Engineer Research and Development Center (U.S.), março de 2024. http://dx.doi.org/10.21079/11681/48353.
Texto completo da fonteKennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams e Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), abril de 2022. http://dx.doi.org/10.21079/11681/43980.
Texto completo da fonte