Literatura científica selecionada sobre o tema "Physicochemical model"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Physicochemical model".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Physicochemical model"
Vincze, Anna, Gergő Dargó e György Tibor Balogh. "Cornea-PAMPA as an Orthogonal in Vitro Physicochemical Model of Corneal Permeability". Periodica Polytechnica Chemical Engineering 64, n.º 3 (25 de maio de 2020): 384–90. http://dx.doi.org/10.3311/ppch.15601.
Texto completo da fonteGronowitz, Mitchell E., Adam Liu, Qiang Qiu, C. Ron Yu e Thomas A. Cleland. "A physicochemical model of odor sampling". PLOS Computational Biology 17, n.º 6 (11 de junho de 2021): e1009054. http://dx.doi.org/10.1371/journal.pcbi.1009054.
Texto completo da fonteDashkevich, Zh V., V. E. Ivanov, T. I. Sergienko e B. V. Kozelov. "Physicochemical model of the auroral ionosphere". Cosmic Research 55, n.º 2 (março de 2017): 88–100. http://dx.doi.org/10.1134/s0010952517020022.
Texto completo da fonteBryan, Nicholas D., Dominic M. Jones, Martin Appleton, Francis R. Livens, Malcolm N. Jones, Peter Warwick, Samantha King e Anthony Hall. "A physicochemical model of metal–humate interactions". Physical Chemistry Chemical Physics 2, n.º 6 (2000): 1291–300. http://dx.doi.org/10.1039/a908722b.
Texto completo da fonteDutta, Samrat, Poonam Singhal, Praveen Agrawal, Raju Tomer, Kritee, Khurana e B. Jayaram. "A Physicochemical Model for Analyzing DNA Sequences". Journal of Chemical Information and Modeling 46, n.º 1 (janeiro de 2006): 78–85. http://dx.doi.org/10.1021/ci050119x.
Texto completo da fonteShapovalov, V. I. "Hot Target. Physicochemical Model of Reactive Sputtering". Technical Physics 64, n.º 7 (julho de 2019): 926–32. http://dx.doi.org/10.1134/s1063784219070211.
Texto completo da fonteLinard, Y., H. Nonnet e T. Advocat. "Physicochemical model for predicting molten glass density". Journal of Non-Crystalline Solids 354, n.º 45-46 (novembro de 2008): 4917–26. http://dx.doi.org/10.1016/j.jnoncrysol.2008.07.013.
Texto completo da fonteHauduc, Hélène, Imre Takács, Scott Smith, Anita Szabó, Sudhir Murthy, Glen T. Daigger e Mathieu Sperandio. "A Dynamic Physicochemical Model for Chemical Phosphorus Removal". Proceedings of the Water Environment Federation 2013, n.º 4 (1 de janeiro de 2013): 172–83. http://dx.doi.org/10.2175/193864713813525473.
Texto completo da fonteNemchinova, N. V., V. A. Bychinskii, S. S. Bel’skii e V. E. Klets. "Basic physicochemical model of carbothermic smelting of silicon". Russian Journal of Non-Ferrous Metals 49, n.º 4 (agosto de 2008): 269–76. http://dx.doi.org/10.3103/s1067821208040111.
Texto completo da fonteZhang, Guo-Hua, e Kuo-Chih Chou. "Model for calculating physicochemical properties of aluminosilicate melt". High Temperature Materials and Processes 32, n.º 2 (17 de abril de 2013): 139–47. http://dx.doi.org/10.1515/htmp-2012-0043.
Texto completo da fonteTeses / dissertações sobre o assunto "Physicochemical model"
Matos, de Oliveira Ana Catarina. "Correlation of physicochemical properties of model drugs and aerosol deposition". Thesis, University College London (University of London), 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.510077.
Texto completo da fontePirogova, Elena 1968. "Examination of physicochemical properties of amino acids within the resonant recognition model". Monash University, Dept. of Electrical and Computer Systems Engineering, 2001. http://arrow.monash.edu.au/hdl/1959.1/8424.
Texto completo da fonteYoo, Ji Yeon. "Development and application of an in vitro physicochemical upper gastrointestinal system (IPUGS) simulating the human digestive processes". Monash University. Faculty of Engineering. Department of Chemical Engineering, 2009. http://arrow.monash.edu.au/hdl/1959.1/75065.
Texto completo da fonteAsmani, Mohamed. "Contribution à l'étude de l'interaction des ultrasons avec les milieux biologiques". Valenciennes, 1994. https://ged.uphf.fr/nuxeo/site/esupversions/f95e1d1f-7e98-47bc-8b7e-ba9d4907a113.
Texto completo da fonteBrijwani, Khushal. "Solid state fermentation of soybean hulls for cellulolytic enzymes production: physicochemical characteristics, and bioreactor design and modeling". Diss., Kansas State University, 2011. http://hdl.handle.net/2097/8401.
Texto completo da fonteDepartment of Grain Science and Industry
Praveen V. Vadlani
The purpose of this study was to investigate micro- and macro-scale aspects of solid state fermentation (SSF) for production of cellulolytic enzymes using fungal cultures. Included in the objectives were investigation of effect of physicochemical characteristics of substrate on enzymes production at micro-scale, and design, fabrication and analysis of solid-state bioreactor at macro-scale. In the initial studies response surface optimization of SSF of soybeans hulls using mixed culture of Trichoderma reesei and Aspergillus oryzae was carried out to standardize the process. Optimum temperature, moisture and pH of 30ºC, 70% and 5 were determined following optimization. Using optimized parameters laboratory scale-up in static tray fermenter was performed that resulted in production of complete and balanced cellulolytic enzyme system. The balanced enzyme system had required 1:1 ratio of filter paper and beta-glucosidase units. This complete and balanced enzyme system was shown to be effective in the hydrolysis of wheat straw to sugars. Mild pretreatments– steam, acid and alkali were performed to vary physicochemical characteristics of soybean hulls – bed porosity, crystallinity and volumetric specific surface. Mild nature of pretreatments minimized the compositional changes of substrate. It was explicitly shown that more porous and crystalline steam pretreated soybean hulls significantly improved cellulolytic enzymes production in T. reesei culture, with no effect on xylanase. In A. oryzae and mixed culture this improvement, though, was not seen. Further studies using standard crystalline substrates and substrates with varying bed porosity confirmed that effect of physicochemical characteristics was selective with respect to fungal species and cellulolytic activity. A novel deep bed bioreactor was designed and fabricated to address scale-up issues. Bioreactor’s unique design of outer wire mesh frame with internal air distribution and a near saturation environment within cabinet resulted in enhanced heat transfer with minimum moisture loss. Enzyme production was faster and leveled within 48 h of operation compared to 96 h required in static tray. A two phase heat and mass transfer model was written that accurately predicted the experimental temperature profile. Simulations also showed that bioreactor operation was more sensitive to changes in cabinet temperature and mass flow rate of distributor air than air temperature.
Baumgart, Tobias. "Herstellung und physikochemische Charakterisierung von planaren gestützten Lipid-Modellmembran-Systemen Preparation and physicochemical characterisation of planar supported lipid model membrane systems /". [S.l.] : [s.n.], 2001. http://ArchiMeD.uni-mainz.de/pub/2001/0123/diss.pdf.
Texto completo da fonteGholami, Samaneh. "Physicochemical and antigenic properties correlation in Streptococcus gordonii vaccine vectors and development of a Streptococcus pneumoniae intra-tracheal mouse model of pneumonia". Doctoral thesis, Università di Siena, 2023. https://hdl.handle.net/11365/1225314.
Texto completo da fonteMoosa, Aysha Bibi. "Influence of selected formulation factors on the transdermal delivery of ibuprofen / Aysha Bibi Moosa". Thesis, North-West University, 2012. http://hdl.handle.net/10394/9795.
Texto completo da fonteThesis (MSc (Pharmaceutics))--North-West University, Potchefstroom Campus, 2013.
Wang, Hui. "Development of nicotine loaded chitosan nanoparticles for lung delivery". Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/108006/1/Hui_Wang_Thesis.pdf.
Texto completo da fonteMangold, Lucas. "Étude multi-techniques et multi-échelles de la spéciation du titane(IV) dans l’acide phosphorique concentré". Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0025.
Texto completo da fonteThe conventional wet-process of production of phosphoric acid consists of a leaching of phosphate ores with sulfuric acid during which several impurities (metallic, sulfate, chloride are dissolved concomitantly. Phosphoric acid and phosphate salts are used in various applications such as fertilizers, food additives, electronic etching agent or pharmaceutical excipients and must therefore meet appropriate of specifications regarding their purity. As a consequence, the concentration of these impurities must be reduced by performing purification steps. At the industrial scale, the purification of phosphoric acid is performed mainly by liquid-liquid extraction. The operation consists in extracting as selectively as possible the phosphoric acid molecules initially contained in the leaching juice into an appropriate organic phase. However this process is not selective enough and some of the impurities are co-extracted. This leads to the necessity of performing additional purification steps to meet the requested specifications, which increases both the complexity of the global treatment and its cost. The knowledge of the speciation of impurities in concentrated phosphoric acid is essential to understand the physicochemical reasons for their co-extraction and, in fine, to design more selective extraction solvents. For example, the solvents presently used for the purification of H₃PO₄ are not selective enough against titanium(IV). Thus, this PhD thesis work aims at characterizing the speciation of this metal in a large range of phosphoric acid concentration, in order to identify subsequently the equilibria responsible for its co-extraction with H₃PO₄. This thesis is based on an original approach combining the use of spectroscopic and molecular modeling techniques. Synthetic solutions containing both titanium(IV) and phosphoric acid have been characterized using different spectroscopic techniques including UV-Visible, Nuclear Magnetic Resonance (³¹P NMR) and X-Ray Absorption (XAS) spectroscopies. Thus, the structure of the complexes formed in phosphoric acid has been studied by comparing UV-Visible spectra and calculations implementing time-dependent density functional theory (TD-DFT). The nuclearity of these complexes has also been estimated by comparing the values of the self-diffusion coefficients determined experimentally by ³¹P NMR with the values calculated by molecular dynamics for different species of titanium (IV) potentially present in solution. The coordination of titanium (IV) was also studied by analyzing the EXAFS (Extended X-Ray Absorption Fine Structure) spectra using ab-initio molecular dynamics simulations explicitly taking into account the solvation of the complexes.Finally, UV-Visible spectral data have been analyzed by a chemometric approach, based on a principal component analysis (PCA), allowing us to extract quantitative information about the distribution of the complex species identified in concentrated phosphoric acid. From all these results, it was possible to propose for the first time a diagram of speciation of titanium (IV) in phosphoric acid for a range of concentrations between 6 and 13 mol.L⁻¹, underlining the evolutionary presence of three mono- and poly-nuclear titanium (IV) complexes, the predominant species of which is [Ti(OH)(H₃PO₄)₂(H₂PO₄)]²⁺
Livros sobre o assunto "Physicochemical model"
H, Greppin, Bonzon M e Degli Agosti R, eds. Some physicochemical and mathematical tools for understanding of living systems. Genève, Switzerland: University of Geneva, 1993.
Encontre o texto completo da fonteHiggins, Huntley G. The effects of physicochemical properties of secondary sludge on settling models. Ottawa: National Library of Canada, 2001.
Encontre o texto completo da fonteTaavitsainen, Veli-Matti. Strategies for combining soft and hard modelling in some physicochemical problems. Lappeenranta: Lappeenrannan teknillinen korkeakoulu, 2001.
Encontre o texto completo da fonteMargolis, L. B., V. P. Skulachev, E. G. Malygin e V. V. Zinoviev. Physicochemical Biology: Restriction-Modification Enzymes; Cell-Model Membrane Interactions. Taylor & Francis Group, 1989.
Encontre o texto completo da fonteGeneralised Physicochemical Model No. 1 (PCM1) for Water and Wastewater Treatment. IWA Publishing, 2020.
Encontre o texto completo da fonteBatstone, Damien. Generalised Physicochemical Model No. 1 (PCM1) for Water and Wastewater Treatment. IWA Publishing, 2020.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Physicochemical model"
Titov, Anatoly T., e Piter M. Larionov. "Physicochemical Model of Calcium Phosphate Mineralization in Human Organism". In Proceedings of the 10th International Congress for Applied Mineralogy (ICAM), 689–97. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-27682-8_83.
Texto completo da fonteSohns, J. T., D. Gond, F. Jirasek, H. Hasse, G. H. Weber e H. Leitte. "Embedding-Space Explanations of Learned Mixture Behavior". In Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes, 32–50. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-35779-4_3.
Texto completo da fonteDar, Elif Doğan, Vilda Purutçuoğlu e Eda Purutçuoğlu. "Detection of HIV-1 Protease Cleavage Sites via Hidden Markov Model and Physicochemical Properties of Amino Acids". In Nonlinear Systems and Complexity, 171–93. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-37141-8_10.
Texto completo da fontePorto, William F., Fabiano C. Fernandes e Octávio L. Franco. "An SVM Model Based on Physicochemical Properties to Predict Antimicrobial Activity from Protein Sequences with Cysteine Knot Motifs". In Advances in Bioinformatics and Computational Biology, 59–62. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-15060-9_6.
Texto completo da fonteBohnsack, John P., Shoeleh Assemi, Jan D. Miller e Darin Y. Furgeson. "The Primacy of Physicochemical Characterization of Nanomaterials for Reliable Toxicity Assessment: A Review of the Zebrafish Nanotoxicology Model". In Methods in Molecular Biology, 261–316. Totowa, NJ: Humana Press, 2012. http://dx.doi.org/10.1007/978-1-62703-002-1_19.
Texto completo da fonteHadgraft, J., e Richard H. Guy. "Physicochemical Models for Percutaneous Absorption". In ACS Symposium Series, 84–97. Washington, DC: American Chemical Society, 1987. http://dx.doi.org/10.1021/bk-1987-0348.ch006.
Texto completo da fonteVieira, Adriana, Ana Gramacho, Dora Rolo, Nádia Vital, Maria João Silva e Henriqueta Louro. "Cellular and Molecular Mechanisms of Toxicity of Ingested Titanium Dioxide Nanomaterials". In Advances in Experimental Medicine and Biology, 225–57. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-88071-2_10.
Texto completo da fontede la Calle Arroyo, Carlos, Jesús López-Fidalgo e Licesio J. Rodríguez-Aragón. "Optimal Experimental Design for Physicochemical Models: A Partial Review". In Trends in Mathematical, Information and Data Sciences, 319–28. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04137-2_26.
Texto completo da fonteBandman, Olga. "Discrete Models of Physicochemical Processes and Their Parallel Implementation". In Methods and Tools of Parallel Programming Multicomputers, 20–29. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-14822-4_3.
Texto completo da fonteDurov, V. A. "Models in Theory of Molecular Liquid Mixtures: Structure, Dynamics, and Physicochemical Properties". In Novel Approaches to the Structure and Dynamics of Liquids: Experiments, Theories and Simulations, 17–40. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/978-1-4020-2384-2_2.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Physicochemical model"
Paillat, T., J. M. Cabaleiro, H. Romat e G. Touchard. "Flow electrification process: The physicochemical corroding model revisited". In 2008 IEEE International Conference on Dielectric Liquids (ICDL 2008). IEEE, 2008. http://dx.doi.org/10.1109/icdl.2008.4622492.
Texto completo da fonteGalia Ariadna Elizondo-Rosales, Maria Elena Sosa-Morales e Jorge F Vélez-Ruiz. "Rheological And Physicochemical Properties Of Some Custard Model Systems." In 2008 Providence, Rhode Island, June 29 - July 2, 2008. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2008. http://dx.doi.org/10.13031/2013.24825.
Texto completo da fonteKADOCHNIKOV, I. N., e I. V. ARSENTIEV. "STATE-TO-STATE MODEL FOR HYDROGENAIR COMBUSTION". In 9th International Symposium on Nonequilibrium Processes, Plasma, Combustion, and Atmospheric Phenomena. TORUS PRESS, 2020. http://dx.doi.org/10.30826/nepcap9b-04.
Texto completo da fontede Julián-Ortiz, Jesus, Lionello Pogliani e Emili Besalú. "Artificial Neural Networks and Multilinear Least Squares to Model Physicochemical Properties of Organic Solvents". In MOL2NET 2016, International Conference on Multidisciplinary Sciences, 2nd edition. Basel, Switzerland: MDPI, 2016. http://dx.doi.org/10.3390/mol2net-02-03826.
Texto completo da fonteDanciu, C., I. Z. Magyari-Pavel, L. Vlaia, E.-A. Moacă, L. Barbu, D. Muntean, A. Cioca et al. "Maslinic Acid Derivative Nanoemulsion: Physicochemical Characterization, Antimicrobial Activity and Three-Dimensional (3D) Reconstructed Human Epidermal Model Screening". In GA – 70th Annual Meeting 2022. Georg Thieme Verlag KG, 2022. http://dx.doi.org/10.1055/s-0042-1759355.
Texto completo da fontePrasad, Rajesh, e A. Krishnamachari. "Classification of lncRNA and mRNA of Eukaryotic model organism using physicochemical properties and composition of dineuclotides and trineuclotides". In 2023 2nd International Conference on Paradigm Shifts in Communications Embedded Systems, Machine Learning and Signal Processing (PCEMS). IEEE, 2023. http://dx.doi.org/10.1109/pcems58491.2023.10136048.
Texto completo da fonteKarunarathne, Sumudu, Jeanette Larsen e Lars Erik Øi. "Mathematical Models for Physicochemical Properties of Different Amine-based Solvents in Post combustion CO2 Capture". In 63rd International Conference of Scandinavian Simulation Society, SIMS 2022, Trondheim, Norway, September 20-21, 2022. Linköping University Electronic Press, 2022. http://dx.doi.org/10.3384/ecp192021.
Texto completo da fonteAnisimova, M., e A. Knyazeva. "Basic models of phase formation at the mesolevel under reactive sintering of Ti-Al-Fe2O3 powder mixture". In 8th International Congress on Energy Fluxes and Radiation Effects. Crossref, 2022. http://dx.doi.org/10.56761/efre2022.n1-p-051402.
Texto completo da fonteIvanishin, Igor, e Viacheslau Kudrashou. "Physicochemical Phenomena of Diffusion Relaxation: Experimental Results and Application for Acid Stimulation Operations". In SPE International Conference on Oilfield Chemistry. SPE, 2023. http://dx.doi.org/10.2118/213810-ms.
Texto completo da fontePereira Tardelli, Lívia, Nasser Darabiha, Denis Veynante e Benedetta Franzelli. "Validating Soot Models in LES of Turbulent Flames: The Contribution of Soot Subgrid Intermittency Model to The Prediction of Soot Production in an Aero-Engine Model Combustor". In ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/gt2021-60296.
Texto completo da fonteRelatórios de organizações sobre o assunto "Physicochemical model"
Grover, Paramjit, M. F. Rahman e M. Mahboob. Bio-Physicochemical Interactions of Engineered Nanomaterials in In Vitro Cell Culture Model. Fort Belvoir, VA: Defense Technical Information Center, agosto de 2012. http://dx.doi.org/10.21236/ada567065.
Texto completo da fonteAzzi, Elias S., Cecilia Sundberg, Helena Söderqvist, Tom Källgren, Harald Cederlund e Haichao Li. Guidelines for estimation of biochar durability : Background report. Department of Energy and Technology, Swedish University of Agricultural Sciences, 2023. http://dx.doi.org/10.54612/a.lkbuavb9qc.
Texto completo da fonteShomer, Ilan, Ruth E. Stark, Victor Gaba e James D. Batteas. Understanding the hardening syndrome of potato (Solanum tuberosum L.) tuber tissue to eliminate textural defects in fresh and fresh-peeled/cut products. United States Department of Agriculture, novembro de 2002. http://dx.doi.org/10.32747/2002.7587238.bard.
Texto completo da fonte