Literatura científica selecionada sobre o tema "Parallel heat flux"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Parallel heat flux".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Parallel heat flux"
Jing, Tingting, Guoqiang He, Fei Qin, Wenqiang Li, Duo Zhang e Minghao Wang. "Flow Distribution Characteristics of Supercritical Hydrocarbon Fuel in Parallel Channels with Pyrolysis". Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 37, n.º 1 (fevereiro de 2019): 1–6. http://dx.doi.org/10.1051/jnwpu/20193710001.
Texto completo da fonteZhang, Donghui, Haiyang Xu, Yi Chen, Leiqing Wang, Jian Qu, Mingfa Wu e Zhiping Zhou. "Boiling Heat Transfer Performance of Parallel Porous Microchannels". Energies 13, n.º 11 (10 de junho de 2020): 2970. http://dx.doi.org/10.3390/en13112970.
Texto completo da fonteKuznetsov, Vladimir, Alisher Shamirzaev e Alexander Mordovskoy. "High heat flux flow boiling of refrigerant R236fa in parallel microchannels". EPJ Web of Conferences 196 (2019): 00062. http://dx.doi.org/10.1051/epjconf/201919600062.
Texto completo da fonteShakier, Raed, Hussam Muhammed, Hussain Khathem e Haider Abdul-Khathem. "Two-Phase Flow In Mini-Scale Complex Geometry". Al-Kitab Journal for Pure Sciences 1, n.º 1 (17 de junho de 2018): 20–26. http://dx.doi.org/10.32441/kjps.v1i1.88.
Texto completo da fonteSalman, Yasin K., e Hazim S. Hamad. "LAMINAR NATURAL CONVECTION HEAT TRANSFER BETWEEN DUCTED PARALLEL PLATES". Journal of Engineering 14, n.º 03 (1 de setembro de 2008): 2786–803. http://dx.doi.org/10.31026/j.eng.2008.03.18.
Texto completo da fonteBarghouthi, I. A., H. Nilsson e S. H. Ghithan. "O<sup>+</sup> and H<sup>+</sup> ion heat fluxes at high altitudes and high latitudes". Annales Geophysicae 32, n.º 8 (26 de agosto de 2014): 1043–57. http://dx.doi.org/10.5194/angeo-32-1043-2014.
Texto completo da fonteGuo, Zeng-Yuan, e Xiao-Bo Wu. "Thermal Drag and Critical Heat Flux for Natural Convection of Air in Vertical Parallel Plates". Journal of Heat Transfer 115, n.º 1 (1 de fevereiro de 1993): 124–29. http://dx.doi.org/10.1115/1.2910637.
Texto completo da fonteZhang, Xiao Jing, Bing Qi Liu, Xiao Jie Xu, Xi Wu e Rui Ming Yuan. "A Study of the Enhancement in Near-Field Radiative Heat Transfer by Surface Polaritons". Applied Mechanics and Materials 448-453 (outubro de 2013): 3211–16. http://dx.doi.org/10.4028/www.scientific.net/amm.448-453.3211.
Texto completo da fonteBergles, A. E., e S. G. Kandlikar. "On the Nature of Critical Heat Flux in Microchannels". Journal of Heat Transfer 127, n.º 1 (1 de janeiro de 2005): 101–7. http://dx.doi.org/10.1115/1.1839587.
Texto completo da fonteFundamenski, W. "Parallel heat flux limits in the tokamak scrape-off layer". Plasma Physics and Controlled Fusion 47, n.º 11 (6 de outubro de 2005): R163—R208. http://dx.doi.org/10.1088/0741-3335/47/11/r01.
Texto completo da fonteTeses / dissertações sobre o assunto "Parallel heat flux"
Kang, Yong Tae. "Experimental investigation of critical heat flux in transient boiling systems with vertical thin rectangular parallel plate channels /". The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu1244826053.
Texto completo da fonteHu, Chih-Chieh. "Mechanistic modeling of evaporating thin liquid film instability on a bwr fuel rod with parallel and cross vapor flow". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28148.
Texto completo da fonteCommittee Chair: Abdel-Khalik, Said; Committee Member: Ammar, Mostafa H.; Committee Member: Ghiaasiaan, S. Mostafa; Committee Member: Hertel, Nolan E.; Committee Member: Liu, Yingjie.
Alanazi, Mohammed Awwad. "Non-invasive Method to Measure Energy Flow Rate in a Pipe". Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/103179.
Texto completo da fonteMS
Grosjean, Alex. "Impact of geometry and shaping of the plasma facing components on hot spot generation in tokamak devices". Electronic Thesis or Diss., Aix-Marseille, 2020. http://www.theses.fr/2020AIXM0556.
Texto completo da fonteThis PhD falls within ITER project support, aiming to study the thermal behavior of ITER-like PFC prototypes in two superconducting tokamaks: EAST (Hefei) and WEST (Cadarache). These prototypes correspond to castellated tungsten monoblocks placed along a cooling tube with small gaps (0.5 mm) between them, called plasma-facing units, to extract the heat from the components. The introduction of gaps between monoblocks (toroidal) and plasma-facing units (poloidal), to relieve the thermomechanical stresses in the divertor, implies that poloidal leading edges may be exposed to near-normal incidence angle. A local overheating is expected in a thin lateral band at the top of each monoblocks, which can be enhanced when the neighboring components are misaligned. In this work, we propose to study the impact of two geometries (sharp and chamfered LEs) of these components, as well as their misalignments on local hot spot generation, by means of embedded diagnostics (TC/FBG), and a submillimeter infrared system (~0.1 mm/pixel), whose emissivity varies with wavelength, and the temperature, but above all, the surface state of the component, which evolves under plasma exposure, during the experimental campaigns. The divertor Langmuir probes measure the plasma temperature, and thus estimate the ion Larmor radius that may play a role in the local heat flux distribution around poloidal and toroidal edges. The results presented in this thesis, confirming the modelling predictions by experimental measurements, support the final decision by ITER to include 0.5 mm toroidal beveling of monoblocks on the vertical divertor targets to protect poloidal leading edges from excessive heat flux
Huang, Yu-Chi, e 黃佑騏. "The Forced Convection Numerical Simulation using Finite Volume Method in the Entrance Region of a Parallel Plate Channel with Constant Heat Flux". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/40240006240377022501.
Texto completo da fonte國立臺灣海洋大學
機械與機電工程學系
103
In the numerical analysis of engineering world, there are three commonly used numerical schemes, namely, Finite-volume, finite-difference, and finite-element methods. The finite volume method (Finite Volume Method, FVM) is the most common one in the thermal-fluid field. The flow area of interest is divided into many non-overlapping control volumes in the FVM and each grid node is surrounded by a control volume. An integral process is performed for each control volume so that conservation laws (such as mass, momentum, and energy) could be satisfied within each control volume specified. Due to its conservation nature, the FVM approach is applied in the discretization and the solution of the governing equations in this thesis. The FVM with SIMPLE algorithm by Patanker is used in this thesis. Several MATLAB programs are developed to study a steady two dimensional laminar forced convection flow with constant wall heat flux in a parallel plate channel. Staggered grid configuration is used in the numerical solutions. Velocity, pressure,temperature, local Nusselt number, and friction coefficient are solved numerically. Fully developed and developed flow are both studied. Results are compared with those of analytic solutions or empirical correlations available. The numerical results of MATLAB are also compared with those of commercial code Fluent. Firstly, the applicability of staggered grid is examined. The grid size is optimized for different Reynolds numbers up to 1000. The MATLAB program developed is then run for both fully developed and uniform velocity inlet. Hydrodynamical and thermal entry length are obtained and compared with those empirical correlations in the literature. Local friction coefficient and Nusselt number are numerically calculated and compared with those analytic solutions available or Fluent results. The applicability of the MATLAB program developed in this thesis using staggered grid is well justified through above comparisons for solving this type of forced convection problem. Secondly, this thesis also compare the results of the FVM and the Fluent numerical simulation. Except in the computation time, both the FVM and the Fluent numerical simulation could achieve satisfactory results. It is proposed that different thermal boundary conditions (such as variable wall temperature, variable wall heat flux), rectangular or circular pipe, or different algorithms, such as SIMPLEC, could be studied in the future.
Livros sobre o assunto "Parallel heat flux"
Aktan, Gülçin. Fully developed laminar natural convection in a vertical parallel-plate duct with constant wall heat flux. 1996.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Parallel heat flux"
Sharath Kumar Reddy, J., e D. Bhargavi. "Thermally Developing Region of a Parallel Plate Channel Partially Filled with a Porous Material with the Effect of Axial Conduction and Viscous Dissipation: Uniform Wall Heat Flux". In Advances in Applied Mechanical Engineering, 27–35. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1201-8_4.
Texto completo da fontePeigin, S., J. Periaux e S. Timchenko. "Asynchrone parallel genetic algorithm for heat flux optimization problem". In Parallel Computational Fluid Dynamics 1998, 377–84. Elsevier, 1999. http://dx.doi.org/10.1016/b978-044482850-7/50107-8.
Texto completo da fonteKozlov, Vladimir, Vladimir Maz’ya e Alexander Movchan. "A Boundary Value Problem for the Laplacian in a Multi-Structure". In Asymptotic Analysis of Fields in Multi-Structures, 56–114. Oxford University PressOxford, 1999. http://dx.doi.org/10.1093/oso/9780198514954.003.0002.
Texto completo da fontePallikarakis, Christos N., Dionysios I. Kolaitis e Maria A. Founti. "Characteristics of surface litter fires: A systematic experimental study". In Advances in Forest Fire Research 2022, 1591–96. Imprensa da Universidade de Coimbra, 2022. http://dx.doi.org/10.14195/978-989-26-2298-9_242.
Texto completo da fonteCarr, Jeremy. "Paranoia and Perception". In Repulsion, 55–70. Liverpool University Press, 2021. http://dx.doi.org/10.3828/liverpool/9781800859326.003.0004.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Parallel heat flux"
Kuznetsov, Vladimir V., e Alisher S. Shamirzaev. "HIGH HEAT FLUX FLOW BOILING OF WATER AND DIELECTRIC COOLANT IN PARALLEL MICROCHANNELS". In International Heat Transfer Conference 16. Connecticut: Begellhouse, 2018. http://dx.doi.org/10.1615/ihtc16.bae.022906.
Texto completo da fonteNelson, Douglas J., e Byard D. Wood. "COMBINED HEAT AND MASS TRANSFER NATURAL CONVECTION BETWEEN VERTICAL PARALLEL PLATES WITH UNIFORM FLUX BOUNDARY CONDITIONS". In International Heat Transfer Conference 8. Connecticut: Begellhouse, 1986. http://dx.doi.org/10.1615/ihtc8.3190.
Texto completo da fonteChen, Tailian, e Suresh V. Garimella. "A Study of Critical Heat Flux During Flow Boiling in Microchannel Heat Sinks". In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44083.
Texto completo da fonteBaxi, C. B., O. Gutierrez, R. Schleicher e C. M. Kendall. "Heat and Mass Transfer in Parallel Flow Mist Cooling". In ASME 2003 Heat Transfer Summer Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/ht2003-47552.
Texto completo da fonteBunderson, Nathan E., e Barton L. Smith. "Quantification of Mixing Performance in Parallel Jets". In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56852.
Texto completo da fonteBergles, A. E., e S. G. Kandlikar. "On the Nature of Critical Heat Flux in Microchannels". In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42383.
Texto completo da fonteSchygulla, Ulrich, Ju¨rgen J. Brandner, Eugen Anurjew, Edgar Hansjosten e Klaus Schubert. "Micro Heat Changers and Surface-Micro-Coolers for High Heat Flux". In ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2008. http://dx.doi.org/10.1115/icnmm2008-62188.
Texto completo da fonteBandhauer, Todd M., e Taylor A. Bevis. "High Heat Flux Boiling Heat Transfer for Laser Diode Arrays". In ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icnmm2016-7947.
Texto completo da fonteChung, Shan-Yu, e Chin Pan. "The Enhancement of Boiling Heat Transfer in a Minichannel Heat Sink With Saw-Tooth Structure on Channel Surface". In ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/mnhmt2016-6626.
Texto completo da fonteKabelac, Stephan, e Sebastian W. Freund. "Local Two-Phase Flow Heat Transfer in Plate Heat Exchangers". In ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference collocated with the ASME 2007 InterPACK Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ht2007-32051.
Texto completo da fonteRelatórios de organizações sobre o assunto "Parallel heat flux"
Kedzierski, Mark A., e Donggyu Kang. Horizontal convective boiling of R1234yf, R134a, and R450A within a micro-fin tube :. Gaithersburg, MD: National Institute of Standards and Technology (U.S.), agosto de 2017. http://dx.doi.org/10.6028/nist.tn.1966.
Texto completo da fonte